Zaloguj się

Gotowe bibliografie tematyczne / ANSYS software / Artykuły w czasopismach

Artykuły w czasopismach na temat „ANSYS software”

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: ANSYS software.

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 20 lutego 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „ANSYS software”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Li, Yu Guang, i Guo Qing Zhang. "The Dynamic Simulation Study of WN Gear Pair after Coupling Tribology". Applied Mechanics and Materials 577 (lipiec 2014): 214–17. http://dx.doi.org/10.4028/www.scientific.net/amm.577.214.

Pełny tekst źródła

Streszczenie:

Based on WN gear characteristics and considering system error, a multi-degree-freedom (Tangential-Radial-Axial) dynamics analysis model after coupling friction was established. In this article, we established the three-dimensional solid model by using PROE and then imported WN gear’ three-dimensional model into Ansys software through the data interface of Ansys software and PROE software and conducted a three-dimensional simulation anasys of the impact of dynamic contact. By applying load, the stress analysis of WN gear was conducted and the WN gear’s the effective stress clouds was gotten. Meanwhile, basing on ANSYS / LS-DYNA, it established the rigid-flexible body of gear dynamic contact model and analyzed the dynamic simulation anasys of WN gear. The results demonstrated that the tangential and axial vibration of double arc gear was significantly greater than the radial vibration.

Style APA, Harvard, Vancouver, ISO itp.

2

Wang, Li Xin, Wen Ge Qiu, Qiu Chao Deng i Zhi Hua Yan. "To Use ANSYS Software with Programming Ideas". Advanced Materials Research 433-440 (styczeń 2012): 4316–19. http://dx.doi.org/10.4028/www.scientific.net/amr.433-440.4316.

Pełny tekst źródła

Streszczenie:

In this paper, the viewpoint, which to use ANSYS software with programming ideas whatever the beginner, medium and advanced users, is put forward. This style of using ANSYS can make full use of ANSYS powerful functionality. There are many advantages, especially in modifying and deleting commands during an analysis, archiving and transferring your analysis documents, protecting your modeling and simulation intellectual property right, concurrent design and analysis, etc

Style APA, Harvard, Vancouver, ISO itp.

3

Wang, Zhi Ming, Yu Chao Wang i Dong Mei Tang. "Method Study on Digital-Model Conversion of Magnetic Worm from CAD Software to ANSYS Software". Advanced Materials Research 443-444 (styczeń 2012): 252–57. http://dx.doi.org/10.4028/www.scientific.net/amr.443-444.252.

Pełny tekst źródła

Streszczenie:

In order to solve the model element-missing problem of magnetic worm during the transmission process from Pro/Engineer software to ANSYS software, the paper proposes a novel transmission method. Tooth surface point-data file is established by the MATLAB software. Then the tooth surface curve is generated by the Pro/Engineer software according to the point-data file. The curve is imported into ANSYS software to set up the finite element analysis model. Finally grids are divided by the ANSYS software. After a series of programming and related works, the finite element model of the worm is established in ANSYS software and it indicates that this method is practical and effective and successfully resolved the model element-missing problem of magnetic worm during the transmission process from Pro/Engineer software to ANSYS software.

Style APA, Harvard, Vancouver, ISO itp.

4

Jaskot, Anna. "STEEL CANTILEVER BEAM OPTIMIZATION WITH ANSYS SOFTWARE". Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo 177, nr 27 (grudzień 2021): 69–75. http://dx.doi.org/10.17512/znb.2021.1.11.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Buzalo, N. A., A. S. Alexeeva i B. A. Chernykhovsky. "Modelling framework joints in ANSYS software complex". IOP Conference Series: Materials Science and Engineering 687 (10.12.2019): 033036. http://dx.doi.org/10.1088/1757-899x/687/3/033036.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Pandey, K. M., i Amrit Sarkar. "Structural Analysis of Nuclear Fuel Element with Ansys Software". International Journal of Engineering and Technology 3, nr 2 (2011): 187–92. http://dx.doi.org/10.7763/ijet.2011.v3.222.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Lv, Ling Wei. "Thermal Analysis Module of ANSYS". Advanced Materials Research 1030-1032 (wrzesień 2014): 653–56. http://dx.doi.org/10.4028/www.scientific.net/amr.1030-1032.653.

Pełny tekst źródła

Streszczenie:

Briefly introduced ANSYS software in this paper,especially its powerful function as a kind of finite element analysis software in terms of thermal analysis. Describes the basic principle of ANSYS thermal analysis、analysis steps and method of data pretreatment and post-treatment, discussed the application of ansys and problems needing attention. in thermal analysis

Style APA, Harvard, Vancouver, ISO itp.

8

Zhao, Wei Tao, Feng Guo i Xiao Li. "Reliability Analysis of Composite Structure Using ANSYS Software". Advanced Materials Research 945-949 (czerwiec 2014): 1155–58. http://dx.doi.org/10.4028/www.scientific.net/amr.945-949.1155.

Pełny tekst źródła

Streszczenie:

ANSYS software has provided complete and accurate solutions for composite laminate analysis and provided a set of special elements for different composite structures such as laminated plates, beams, solid structures and stiffeners. Fiber composite materials have been widely used to critical components of aircrafts, automobiles, mechanical, and marine structures. Since uncertainties associated with geometric tolerances, material properties, and boundary conditions widely exist in practical engineering problems. The probability approach is the most popular way to quantify uncertain parameters and perform the reliability analysis. The paper researches on the reliability analysis of the composite panels using ANSYS software. The numerical example is given, it is shown that the response surface method (RSM) can reduce the computational efforts comparing with Monte Carlo simulation (MCS).

Style APA, Harvard, Vancouver, ISO itp.

9

Marchuk, N. I., S. V. Deordiev i E. V. Prasolenko. "Optimal design solutions for structures using ANSYS software". IOP Conference Series: Materials Science and Engineering 456 (31.12.2018): 012022. http://dx.doi.org/10.1088/1757-899x/456/1/012022.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Shalamov, P. V., I. A. Kulygina i E. N. Yaroslavova. "ANSYS Software-based Study of Thermal Drilling Process". Procedia Engineering 150 (2016): 746–52. http://dx.doi.org/10.1016/j.proeng.2016.07.098.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Chemezov, Denis Alexandrovich. "DESCRIPTION OF LIBRARY MATERIALS SOFTWARE PACKAGE ANSYS AUTODYN". Theoretical & Applied Science 16, nr 08 (30.08.2014): 4–23. http://dx.doi.org/10.15863/tas.2014.08.16.2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Kuznetsov, I. A., A. N. Gribanov, A. A. Kurushin, G. F. Moseychuk i A. I. Sinani. "Electrodynamic computations using ANSYS Electronics Desktop software controlled by a program developed in the MATLAB environment". Journal of «Almaz – Antey» Air and Space Defence Corporation, nr 3 (30.09.2019): 13–18. http://dx.doi.org/10.38013/2542-0542-2019-3-13-18.

Pełny tekst źródła

Streszczenie:

The paper considers methods of controlling the process of electrodynamic structure simulation in the ANSYS Electronics Desktop software (previously known as ANSYS HFSS). The MATLAB software was leading the computation. In order to transmit data to the ANSYS Electronics Desktop software we employed the Microsoft Component Object Model technology, which makes it possible to combine software components into executables. We used simulation of a planar aperture phased antenna array to show the possibilities and limitations in controlling the ANSYS HFSS software subsequently outputting data to a text file and importing the latter into MATLAB for further computation. We present simulation results for a phased antenna array generated by the ANSYS Electronics Desktop software according to the array model compiled in MATLAB

Style APA, Harvard, Vancouver, ISO itp.

13

Zhou, Bo, Jun Lv i Dong Xue Wang. "Numerical Analysis on Stress Field near Crack-Tip of Mode I in Shape Memory Alloy". Applied Mechanics and Materials 357-360 (sierpień 2013): 1437–40. http://dx.doi.org/10.4028/www.scientific.net/amm.357-360.1437.

Pełny tekst źródła

Streszczenie:

The methods to define the material parameters related to the super-elasticity of shape memory alloy in the software of ANSYS are introduced. The mechanical behaviors with super-elasticity occurring in the shape memory alloy are numerically simulated by the software ANSYS. The stress field near crack-tip of mode I in the material of shape memory alloy with super-elasticity are numerically simulated by the software ANSYS. Results of numerical simulation show that the software ANSYS is able to simulate the fracture behaviors occurring in the shape memory alloy structures effectively.

Style APA, Harvard, Vancouver, ISO itp.

14

Zhang, Xin Zhong, Lei Lei Liu i Ke Dong Tang. "Nonlinear Analysis of Reinforced Concrete Beam by ANSYS". Applied Mechanics and Materials 438-439 (październik 2013): 663–66. http://dx.doi.org/10.4028/www.scientific.net/amm.438-439.663.

Pełny tekst źródła

Streszczenie:

This paper mainly uses ANSYS, the finite element analysis software, to make nonlinear analysis of reinforced concrete beam. The model simulating the test process was established, the calculation results of ANSYS are compared with the experimental results. The comparison shows that ANSYS analysis results are similar to experimental results, which indicates ANSYS analysis software can be used to simulate the mechanical property of reinforced concrete structures.

Style APA, Harvard, Vancouver, ISO itp.

15

Zhiltsov, Yuriy, i Viktor Elshin. "ANSYS CFX SOFTWARE APPLICATION FOR PULVERIZED COAL BURNER SIMULATION". Proceedings of Irkutsk State Technical University 21, nr 4 (kwiecień 2017): 75–80. http://dx.doi.org/10.21285/1814-3520-2017-4-75-80.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

Kukreja, Nitin, i Piyush Singhal. "Design and verify a natural frequency using ANSYS software". Materials Today: Proceedings 45 (2021): 3255–58. http://dx.doi.org/10.1016/j.matpr.2020.12.386.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Godara, S. S., Vinayak Brenia, Amit Kumar Soni, Rupender Singh Shekhawat i K. K. Saxena. "Design & analysis of connecting rod using ANSYS software". Materials Today: Proceedings 56 (2022): 1896–903. http://dx.doi.org/10.1016/j.matpr.2021.11.166.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Ovsepian, E. E., E. L. Leusheva i V. A. Morenov. "Drilling mud upward velocity modelling in Ansys CFX software". IOP Conference Series: Earth and Environmental Science 931, nr 1 (1.12.2021): 012020. http://dx.doi.org/10.1088/1755-1315/931/1/012020.

Pełny tekst źródła

Streszczenie:

Abstract Drilling mud has various functions, one of which is to carry cuttings to the surface. All other things being equal, the removal of cuttings is characterized by the upward velocity. This paper simulates the rheology of polymer-glycolic non-dispersing mud (in particular viscosity) to achieve the required upward velocity in the «Ansys CFX» software. The viscosity of the mud varies from 6 to 12 mPa·s, on production casing drilling in Arctic conditions. The results of the study showed that for such conditions, the viscosity should be in the range from 6 to 8 mPa·s.

Style APA, Harvard, Vancouver, ISO itp.

19

Surendra, Bathala, i D. Vinod. "Finite Element Analysis of Composite Laminate by ANSYS Software". Journal of Physics: Conference Series 1964, nr 6 (1.07.2021): 062097. http://dx.doi.org/10.1088/1742-6596/1964/6/062097.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

Ahiwale, Dhiraj, Harshada Madake, Nikita Phadtare, Amit Jarande i Deepak Jambhale. "Modal analysis of cracked cantilever beam using ANSYS software". Materials Today: Proceedings 56 (2022): 165–70. http://dx.doi.org/10.1016/j.matpr.2022.01.055.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Brestovič, Tomáš, i Natália Jasminská. "SOFTWARE SUPPORT DEVELOPMENT FOR NUMERICAL SOLUTION OF ANSYS CFX". Acta Mechanica et Automatica 7, nr 4 (1.12.2013): 215–21. http://dx.doi.org/10.2478/ama-2013-0036.

Pełny tekst źródła

Streszczenie:

Abstract The paper deals with possibilities to apply a new developed software support for simulation programme ANSYS CFX. A direct export of heat-transfer coefficients into variables used under edge conditions as well as of physical properties of gas mixtures into material properties during simulation solution of technical tasks means a significant saving of time. The paper summarizes in detail description of the software for calculation of heat-transfer coefficient during free convection (HTC-FC) and of material properties of gas mixture (MPGM) that enable to export calculated data directly into the text files which can be imported then into the programme ANSYS CFX.

Style APA, Harvard, Vancouver, ISO itp.

22

Yuan, Qing Ke, Ya Nan Du, Yao Ding i Tong Le Wang. "Modal Analysis of Ball Screw Based on ANSYS Software". Advanced Materials Research 314-316 (sierpień 2011): 1981–86. http://dx.doi.org/10.4028/www.scientific.net/amr.314-316.1981.

Pełny tekst źródła

Streszczenie:

Ball screw is an important part in the machine tool feeding system. This paper researches on the ball screw, establishes the 3D virtual numerical model by Pro/engineer. Modal analysis of ball screw is carried out in three different cases by ANSYS, then gets the intrinsic frequency and vibration model of ball screw. It provides reliable reference for further structure analysis of ball screw.

Style APA, Harvard, Vancouver, ISO itp.

23

Sergeev, S. V., D. V. Proshunin i Yu S. Sergeev. "Calculation of errors in hole machining by ansys software". Russian Engineering Research 32, nr 5-6 (maj 2012): 515–18. http://dx.doi.org/10.3103/s1068798x1205022x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Dahmani, L., A. Khennane i S. Kaci. "Crack identification in reinforced concrete beams using ANSYS software". Strength of Materials 42, nr 2 (marzec 2010): 232–40. http://dx.doi.org/10.1007/s11223-010-9212-6.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Zhang, Guo Hua, Shi Xuan Liu i Yong Qi. "The Application of ANSYS to Ultrasonic Cleaner Design". Applied Mechanics and Materials 441 (grudzień 2013): 518–21. http://dx.doi.org/10.4028/www.scientific.net/amm.441.518.

Pełny tekst źródła

Streszczenie:

With the development of modern mechanics methods and computer technology, some practical commercial finite element analysis software was introduced to the ultrasonic cleaner design. ANSYS software is a financial structure, fluid, electric field, magnetic field, the sound field analysis in one large general-purpose finite element analysis software can be used in many industrial fields. The basic operation of ANSYS was introduced. The simulation based on the ANSYS was applied in the design of ultrasonic cleaner successfully, which can improve work efficiency and shorten development period of ultrasonic cleaner.

Style APA, Harvard, Vancouver, ISO itp.

26

Wang, Yan Xia, i Hui Gao. "Optimization Design of Piston Head on ANSYS". Advanced Materials Research 199-200 (luty 2011): 1196–99. http://dx.doi.org/10.4028/www.scientific.net/amr.199-200.1196.

Pełny tekst źródła

Streszczenie:

Based on the axially symmetric of piston head, the 2D parametric model of piston head is established using the ANSYS software. The optimized design program is written by APDL language and the optimization is carried out using the ANSYS software, which provides a better reference for reliability and life of engine.

Style APA, Harvard, Vancouver, ISO itp.

27

Liu, Cheng Lin, Ze Sun, Yun Zhao, Xing Fu Song, Gui Min Lu i Jian Guo Yu. "Different Finite Element Software on Electric Field Analysis of Magnesium Electrolysis Cell". Advanced Materials Research 291-294 (lipiec 2011): 2352–55. http://dx.doi.org/10.4028/www.scientific.net/amr.291-294.2352.

Pełny tekst źródła

Streszczenie:

The electric field distribution was the main factor affecting on the current efficiency of electrolysis cell. So, the electric field distribution of magnesium electrolysis cell was studied to improve the current efficiency by two of main finite element softwares, COMSOL and ANSYS. The electric field distribution and its trends with the electrolyte change from 1.25m to 1.40m were calculated by using the two softwares. Form the results, the characteristics of COMSOL and ANSYS can be obtained. The conclusions of the paper will provided a significant reference for choose the appropriate software in practice process.

Style APA, Harvard, Vancouver, ISO itp.

28

Ren, Bai Cheng. "Surrounding Rock Rupture Modeling of Tunnel Based on ANSYS". Applied Mechanics and Materials 490-491 (styczeń 2014): 863–66. http://dx.doi.org/10.4028/www.scientific.net/amm.490-491.863.

Pełny tekst źródła

Streszczenie:

This article is based on the real condition of a tunnel. By using displacement and stress contours get from finite element analysis software ANSYS, the simulation of the tunnel excavation is modeled and the regulation of overlying rock’s displacement and stress is deducted during the evacuation of the tunnel. The analysis result to overlying rock mass’ rupture regularity can be helpful for the control of surrounding rock’s stability and the improvement of supporting system. The result shows finite element analysis software ANASYS can be used to guide tunnel constructions during the evacuation.

Style APA, Harvard, Vancouver, ISO itp.

29

Paulech, Juraj, Gabriel Gálik, Vladimír Kutiš i Justín Murín. "Software for Model Preparation of Transmission Lattice Construction". Strojnícky časopis - Journal of Mechanical Engineering 69, nr 3 (1.11.2019): 89–94. http://dx.doi.org/10.2478/scjme-2019-0034.

Pełny tekst źródła

Streszczenie:

AbstractThis paper presents the preparation phase for model of transmission tower lattice construction using ANSYS APDL environment. Beam elements are used for the model which introduce complications in the preparation phase because of the need to define the beam shape. Considering that the lattice construction of the transmission tower consists of hundreds of trusses it is obvious that some auxiliary tool is necessary for preparation of such model in ANSYS APDL. This tool was programmed in SW Wolfram Mathematica.

Style APA, Harvard, Vancouver, ISO itp.

30

Li, Teng, Le Mu, Xian Da Wang, Bo Feng i Zi Yi Jin. "Contact Stress Analysis of Packer Rubber Based on ANSYS Software". Advanced Materials Research 860-863 (grudzień 2013): 2966–69. http://dx.doi.org/10.4028/www.scientific.net/amr.860-863.2966.

Pełny tekst źródła

Streszczenie:

In this paper three-rubber compression packers are regard as study objects, hyper-elastic constitution equation Yeoh has been used, the ANSYS mechanical model of packer rubber has been established by ANSYS software, the influence of axial setting force and frictional coefficient on the contact stress of packer rubber has been analyzed. The research results indicate that with the increasing of setting force, the axial compression amount and Von Mises stress increase; with the increasing of frictional coefficient between rubber and casing, the Von Mises stress of the intermediate rubber decreases slowly.

Style APA, Harvard, Vancouver, ISO itp.

31

Zhiltsov, Yuri V., i Viktor V. Elshin. "USE OF ANSYS CFX SOFTWARE FOR COMBINED BOILER MODEL DEVELOPMENT". Proceedings of Irkutsk State Technical University 21, nr 3 (marzec 2017): 81–90. http://dx.doi.org/10.21285/1814-3520-2017-3-81-90.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Cheng, Li Juan, i Xin Chi Yan. "Compare SM Solver, ANSYS Soft Ware to Analyze Structural Internal Force Bars". Applied Mechanics and Materials 590 (czerwiec 2014): 732–35. http://dx.doi.org/10.4028/www.scientific.net/amm.590.732.

Pełny tekst źródła

Streszczenie:

In order to compare the accuracy of SM Solver, ANSYS software to analyze structural internal force bars,we use SM Solver and ANSYS software modeling steel frame door respectively, and comparing the situation of internal forces of the same type frame for error analysis. The results show that SM Solver and ANSYS software have small error in shear analysis, but the gap is relatively large in moment analysis, and the error is reduced with the increase in the number of dividing cells.

Style APA, Harvard, Vancouver, ISO itp.

33

Pelevin, Aleksander, i Vladimir Shadrin. "Features of using the viscoelastic material model in the ANSYS software package". Вестник Пермского университета. Математика. Механика. Информатика, nr 3(54) (2021): 52–57. http://dx.doi.org/10.17072/1993-0550-2021-3-52-57.

Pełny tekst źródła

Streszczenie:

The paper presents an experiment on uniaxial cyclic stretching with increasing amplitude of a filled elastomeric material. Such materials have complex mechanisms of mechanical behavior, in addition to elasticity, there are viscoelasticity and the Mullins softening effect. According to the experimental data, a mathematical model of a viscoelastic material with a softening effect is constructed in the ANSYS software package. It is shown that the combined use of the Ogden hyperelastic model, the Ogden–Roxburgh softening model, and the Prony viscoelastic model in the ANSYS software package accurately describes the mechanical behavior of the material for a multiplicity of elongation 2.

Style APA, Harvard, Vancouver, ISO itp.

34

BOJKO, MARIAN, LUKAS HERTL i SYLVA DRABKOVA. "METHODS OF CFD MODELLING OF TWIN-SCREW PUMPS FOR NON-NEWTONIAN MATERIALS". MM Science Journal 2021, nr 6 (15.12.2021): 5366–72. http://dx.doi.org/10.17973/mmsj.2021_12_2021103.

Pełny tekst źródła

Streszczenie:

The twin-screw pump is designed for pumping highly viscous materials in the food industry. Rheological characteristics of materials are important in the specification of design parameters of screw pumps. Analysis of flow in the twin-screw pumps with definition of non-newtonian materials can be made by numerical modelling. CFD generally oriented software ANSYS Fluent and ANSYS Polyflow has been used for modelling. In this study those software’s (ANSYS Fluent and ANSYS Polyflow) were defined for solution of flow in the twin-screw pumps. Results were compared for the same boundary conditions on the inlet and outlet of the 3D model. For definition of the viscosity were used the Nonnewtonian power law. Parameters as consistency coefficient and flow exponent for Nonnewtonian power law were analysed by software ANSYS Fluent and ANSYS Polyflow. Postprocessing form ANSYS Fluent and ANSYS Polyflow were made by contours of field and by graphs.

Style APA, Harvard, Vancouver, ISO itp.

35

Tao, Yang, Zhi Hu Li, Shao Fei Wang, Jing Jing Fan, Wen Wu Zou i Yong Huang. "Based on ANSYS Design Optimization of Vehicle's Tailgate". Applied Mechanics and Materials 152-154 (styczeń 2012): 709–13. http://dx.doi.org/10.4028/www.scientific.net/amm.152-154.709.

Pełny tekst źródła

Streszczenie:

Increased the machinery of spring and baffle to prevent goods falling bodies ,in order to ensure the safety of persons and goods when loading and unloading. Using UG software for designing automotive Vehicle Tailboards structure of solid modeling, using ANSYS software for mechanical analysising the floating beam, which is the important structural parts of automotive Vehicle’s Tailboards. Analysis the floating beam in different thicknesses and loads of stress, To determined the optimal combination about thickness and load of the floating beam. Above all, The main components of mechanical analysis cannot product the Vehicle’s Tailboards by ANSYS software,Which saving costs on the design and manufacture of production, shorten production cycle and improved the market competitiveness of the product.

Style APA, Harvard, Vancouver, ISO itp.

36

Yang, Xiao Yu. "Tube Hydroforming Analysis Based on Ansys". Applied Mechanics and Materials 232 (listopad 2012): 537–40. http://dx.doi.org/10.4028/www.scientific.net/amm.232.537.

Pełny tekst źródła

Streszczenie:

This paper briefly introduces some problems of tube hydroforming process, at the same time, also uses Ansys software to simulate in tube hydroforming process. And draw an conclusion，To avoid defects in tube hydroforming process, the applied internal pressure must be high enough to suppress buckling but not too high to cause bursting.

Style APA, Harvard, Vancouver, ISO itp.

37

Zhai, Wei Wei, Yu Zhang, Xiao Long Lin, Li Chun Wu, Jia Quan Zhang, Yi Wen Xu i Tie Qiang Zhang. "The Emulation Design of Hall Component Based on ANSYS Software". Advanced Materials Research 482-484 (luty 2012): 1929–32. http://dx.doi.org/10.4028/www.scientific.net/amr.482-484.1929.

Pełny tekst źródła

Streszczenie:

This essay describes the design methodology of Hall component based on ANSYS soft emulation, and analyses the key parameters of Hall component affecting its performance in the design process. The ANSYS software emulation results shows that Hall voltage will be affected by the Hall components with different length to width ratio and the plus electrode in different length and width. The length to width ratio of 1.5 to 2 will get better results, and it proves that the width of the electrode should be less than one-tenth the size of length. The Hall voltage within a certain range will increase with increasing length of Hall components plus electrode. So it is important to choose the best size ratio when designing the Hall components.

Style APA, Harvard, Vancouver, ISO itp.

38

Wang, Bo, Yong Zhang i Rong Jun Chen. "Several Realizations of the Finite Element Software ANSYS Structural Analysis". Applied Mechanics and Materials 442 (październik 2013): 507–10. http://dx.doi.org/10.4028/www.scientific.net/amm.442.507.

Pełny tekst źródła

Streszczenie:

Based on the normal work and study practice, the author sums up some experience that need to pay attention to some problems in the Ansys finite element analysis. In structural static analysis, the principle of the stress singularity and different load are needed to apply. And in analyzing the nonlinear structure, the problems of convergence are needed to pay special attention.

Style APA, Harvard, Vancouver, ISO itp.

39

Yan, Yong Gang, Yan Qin Li i Zhan Kui Wang. "Optimization Design of Coordinate Measuring Machine Based on ANSYS Software". Applied Mechanics and Materials 42 (listopad 2010): 453–56. http://dx.doi.org/10.4028/www.scientific.net/amm.42.453.

Pełny tekst źródła

Streszczenie:

Coordinate measuring machine (CMM) is a large-scale geometrical detecting instrument. It is of high accuracy, high efficiency simple operation and automation. So, it can ensure the product quality for modern mechanical manufacture industry, and is widely used in the industry such as aircraft, automobile, military and national defense. However, it does not meet gradually the requirement of modern industry because of its measuring accuracy. How to monitor geometrical error rapidly and high accurately is a key research project. To solve the problem, some studies have been carried out. In this paper, a coordinate measuring machine was firstly designed by modern design method. Three dimensional model is built using PRO/E software. And some key components were optimized by using finite element analysis method. The simulating results show that the size and structure of the designed coordinate measuring machines are optimized and improved relate to previous CMM. This study will play an important instructing role for us in studying a novel CMM.

Style APA, Harvard, Vancouver, ISO itp.

40

Venkatesh, K. "Improvement in Life of Forging Die by Using Ansys Software". International Journal for Research in Applied Science and Engineering Technology V, nr IX (30.09.2017): 571–80. http://dx.doi.org/10.22214/ijraset.2017.9084.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Koch, Henrique Cardoso, i Bruna Manica Lazzari. "FINITE ELEMENT ANALYSIS OF REINFORCED CONCRETE BEAMS THROUGH ANSYS SOFTWARE". Journal of Engineering Research 2, nr 10 (24.06.2022): 2–46. http://dx.doi.org/10.22533/at.ed.3172102220061.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

Azziz, H. N., E. Q. Hussein i M. A. Abdulhameed. "Analysis of fluid flow states in viscometers in ansys software". IOP Conference Series: Materials Science and Engineering 1067, nr 1 (1.02.2021): 012091. http://dx.doi.org/10.1088/1757-899x/1067/1/012091.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Hussain, Mohd Arif. "Structural Analysis of Chassis Frame Using CFRP and ANSYS Software". International Journal for Research in Applied Science and Engineering Technology 9, nr 8 (31.08.2021): 2689–96. http://dx.doi.org/10.22214/ijraset.2021.37850.

Pełny tekst źródła

Streszczenie:

Abstract: Automotive chassis is an important part of an automobile. The chassis serves as a frame work for supporting the body and different parts of the automobile. The chassis frame has to withstand the stresses developed within a limit. Along with strength, an important consideration in chassis design is to have adequate bending stiffness for better handling characteristics. So, strength and stiffness are two important criteria for the design of the chassis. This work is aimed at work performed towards the static structural analysis of the automobile chassis in which study of the stresses developed and deformation of chassis frame of a truck has been done . The chassis is modelled in SolidWorks and finite element analysis has been done in ANSYS. a comparison of current conventional steel chassis structural Steel and Aluminum and CFRP chassis in terms of deflection and stresses must be made in order to select the best one. A discussion and analysis is also done which gives insight on various effects of unidirectional fiber orientations in the chassis on strength and stiffness. Keyword: ANSYS, SolidWorks, chassis, strength, stiffness, structural analysis.

Style APA, Harvard, Vancouver, ISO itp.

44

Králik, Juraj, i Juraj JR Králik. "Methodology of Teaching Methods of FEM Analysis Using Software ANSYS". International Journal of Education and Information Technologies 16 (4.01.2022): 12–28. http://dx.doi.org/10.46300/9109.2022.16.2.

Pełny tekst źródła

Streszczenie:

This paper presents the authors' experience of teaching the finite element method (FEM) at university. With the development of computational tools in the second half of the twentieth century, there was also the development of computational methods focused on the algorithmization of engineering tasks based on FEM. From the solution of individual problems of the state of stress and deformation from the influence of the external environment, a complex solution of the mutual interaction of the system of deformable bodies (elements) has been performed while improving the physical and geometric characteristics of modern materials and structures. Many processes in the automatic design system take place as if in a "black box" and the process of verifying the achieved results becomes the most important stage in the design activity. Without knowledge of the theoretical basis of FEM, physical and mathematical modeling, verification procedures and methods, the design of a structure cannot be safe and reliable. In this paper we present one of the possibilities how the student can get acquainted with the theoretical foundations of FEM and with computational procedures using ANSYS software.

Style APA, Harvard, Vancouver, ISO itp.

45

王, 东海. "Numerical Simulation of SHPB Experimental Process Based on ANSYS Software". International Journal of Mechanics Research 08, nr 01 (2019): 39–46. http://dx.doi.org/10.12677/ijm.2019.81005.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Zahariea, D. "Numerical analysis of eccentric orifice plate using ANSYS Fluent software". IOP Conference Series: Materials Science and Engineering 161 (listopad 2016): 012041. http://dx.doi.org/10.1088/1757-899x/161/1/012041.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Frătiţa, M., K. Uzuneanu, F. Popescu i I. V. Ion. "The analysis of the thermal barrier coating using Ansys software". IOP Conference Series: Materials Science and Engineering 997 (25.12.2020): 012143. http://dx.doi.org/10.1088/1757-899x/997/1/012143.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

Yagnyatinskiy, D. A., i V. N. Fedoseyev. "Numerical Simulations of a Monomorph Deformable Mirror in ANSYS Software". Atmospheric and Oceanic Optics 33, nr 4 (lipiec 2020): 372–78. http://dx.doi.org/10.1134/s1024856020040193.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

Zhang, Guo Jun, Yong Bin Jia i Xi Lin Lu. "Cracking Simulative Analysis of Reinforced Concrete Columns with ANSYS Software". Applied Mechanics and Materials 578-579 (lipiec 2014): 946–49. http://dx.doi.org/10.4028/www.scientific.net/amm.578-579.946.

Pełny tekst źródła

Streszczenie:

The principle and processof finite element model of ANSYS software for RC frame column was introduced firstly,and then the cracking and development rules of RC columns under monotonic load were analyzed with ANSYSsoftware. The results show that: with the stirrup ratios increasing, the short columnwith rectangle hoop, rectangle cross brace hoop and tic tac toe stirrups appearsuccessively few inclined cracks and more vertical cracks; with the axialcompression ratio increasing, more length of horizontal cracks extend to naturalaxis, more vertical cracks appear and appeared cracks are higher along thecolumn height direction for middle length HSC frame columns; the length of OSCframe columns is not so long than that of HSC frame columns, and the crack distributionis dense and crack forms mesh, which show better ductility.

Style APA, Harvard, Vancouver, ISO itp.

50

Sherov, K. T., M. R. Sikhimbayev, A. K. Sherov, B. S. Donenbayev, A. K. Rakishev, A. B. Mazdubai, M. M. Musayev i A. M. Abeuova. "Mathematical Modeling of Thermofrictional Milling Process Using ANSYS WB Software". Journal of Theoretical and Applied Mechanics 47, nr 2 (27.06.2017): 24–33. http://dx.doi.org/10.1515/jtam-2017-0008.

Pełny tekst źródła

Streszczenie:

Abstract This article presents ANSYS WB-based mathematical modelling of the thermofrictional milling process, which allowed studying the dynamics of thermal and physical processes occurring during the processing. The technique used also allows determination of the optimal cutting conditions of thermofrictional milling for processing various materials, in particular steel 40CN2MA, 30CGSA, 45, 3sp. In our study, from among a number of existing models of cutting fracture, we chose the criterion first proposed by prof. V. L. Kolmogorov. In order to increase the calculations performance, a mathematical model was proposed, that used only two objects: a parallelepiped-shaped workpiece and a cutting insert in the form of a pentagonal prism. In addition, the work takes into account the friction coefficient between a cutting insert and a workpiece taken equal to 0.4 mm. To determine the temperature in the subcontact layer of the workpiece, we introduced the coordinates of nine characteristic points with the same interval in the local coordinate system. As a result, the temperature values were obtained for different materials at the studied points during the cutter speed change. The research results showed the possibility of controlling thermal processes during processing by choosing the optimum cutting modes.

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!