Gotowa bibliografia na temat „AMg6 aluminum alloy”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „AMg6 aluminum alloy”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "AMg6 aluminum alloy"
Luts, A. R., Yu V. Sherina, A. P. Amosov i A. D. Kachura. "Liquid matrix SHS manufacturing and heat treatment of Al–Mg composites reinforced with fine titanium carbide". Izvestiya. Non-Ferrous Metallurgy, nr 4 (21.08.2023): 70–86. http://dx.doi.org/10.17073/0021-3438-2023-4-70-86.
Pełny tekst źródłaRakhadilov, B., L. Zhurerova, W. Wieleba, Zh Sagdoldina i A. K. Khassenov. "Features of the structure and properties formation of AMG6 alloy under the equal channel angular pressing". Bulletin of the Karaganda University. "Physics" Series 97, nr 1 (30.03.2020): 42–49. http://dx.doi.org/10.31489/2020ph1/42-49.
Pełny tekst źródłaUazyrkhanova, Gulzhaz, Bauyrzhan K. Rakhadilov, Alexandr Myakinin i Zhuldyz Uazyrkhanova. "The Change in the Thin Structure and Mechanical Properties of Aluminum Alloys at Intensive Plastic Deformation". Materials Science Forum 906 (wrzesień 2017): 114–20. http://dx.doi.org/10.4028/www.scientific.net/msf.906.114.
Pełny tekst źródłaNikitin, K. V., V. I. Nikitin, I. Yu Timoshkin, R. M. Biktimirov i A. P. Novikov. "Hereditary influence of deformed waste on the efficiency of Al–Si–Mg and Al–Mg alloy modification". Izvestiya Vuzov. Tsvetnaya Metallurgiya (Universities' Proceedings Non-Ferrous Metallurgy), nr 3 (15.06.2022): 38–46. http://dx.doi.org/10.17073/0022-3438-2022-3-38-46.
Pełny tekst źródłaПрохоров, В. М., i Е. Л. Громницкая. "Зависимость от давления коэффициентов упругости алюминий-магниевого сплава AMg6 и нанокомпозитного сплава n-Mg6/C-=SUB=-60-=/SUB=-". Физика твердого тела 60, nr 4 (2018): 765. http://dx.doi.org/10.21883/ftt.2018.04.45690.300.
Pełny tekst źródłaLobanov, L. M., M. O. Pashchyn, O. M. Tymoshenko, P. V. Goncharov, O. L. Mikhodui i K. V. Shiyan. "Increase in the life of welded joints of AMg6 aluminum alloy". Paton Welding Journal 2020, nr 4 (28.04.2020): 2–8. http://dx.doi.org/10.37434/tpwj2020.04.01.
Pełny tekst źródłaGoncharova, O. A., D. S. Kuznetsov, N. N. Andreev, N. P. Andreeva i Yu I. Kuznetsov. "Chamber corrosion inhibitors of aluminum alloy AMG6". Corrosion: Materials, Protection, nr 8 (21.08.2019): 23–28. http://dx.doi.org/10.31044/1813-7016-2019-0-8-23-28.
Pełny tekst źródłaOvchinnikov, Viktor, Viktorya Berezina i Tat'yana Skakova. "A normalized method for determining the influence on the fixed joints tightness using the technology of the sealing surface job". Science intensive technologies in mechanical engineering 2021, nr 11 (30.11.2021): 20–29. http://dx.doi.org/10.30987/2223-4608-2021-11-20-29.
Pełny tekst źródłaLoginov, Yu N., i A. G. Illarionov. "DISCONTINUITY OF AMG6 ALUMINUM ALLOY EXTRUDED TUBE STRUCTURE". Izvestiya Vuzov. Tsvetnaya Metallurgiya (Proceedings of Higher Schools. Nonferrous Metallurgy), nr 6 (1.03.2015): 35. http://dx.doi.org/10.17073/0021-3438-2013-6-35-40.
Pełny tekst źródłaGoncharova, O. A., D. S. Kuznetsov, N. N. Andreev, Yu I. Kuznetsov i N. P. Andreeva. "Chamber Inhibitors of Corrosion of AMg6 Aluminum Alloy". Protection of Metals and Physical Chemistry of Surfaces 56, nr 7 (grudzień 2020): 1293–98. http://dx.doi.org/10.1134/s2070205120070060.
Pełny tekst źródłaRozprawy doktorskie na temat "AMg6 aluminum alloy"
Didych, Iryna. "Estimation of structural integrity and lifetime of important structural elements". Electronic Thesis or Diss., Université Clermont Auvergne (2021-...), 2021. http://www.theses.fr/2021UCFAC116.
Pełny tekst źródłaThis work has been performed under co-tutelle supervision between Ternopil IvanPuluj National Technical University in Ternopil (Ukraine) and UniversityClermont Auvergne, CNRS, SIGMA Clermont, Institut Pascal in Clermont-Ferrand (France).This thesis solves the scientific task of responsible structural elements strength andlifetime evaluation. The aim of the thesis is to evaluate the strength and residuallifetime of structural elements by machine learning methods.Most parts of machines and structural elements while being in service are under theinfluence of loads of various nature. Such forces are applied either directly to theelement or transmitted through neighbor elements connected to it. For the normaloperation of the responsible structures parts, each element must have certain sizeand shape that will withstand the loads acting on it. In particular, it must haveappropriate strength properties, not deform significantly under the action ofstresses, be rigid, and preserve its original shape.The calculated residual lifetime of machines and structures can be predicted usingfatigue crack growth (FCG) diagrams. Often, the experimental data have a certainspread, which should be taken into account in their analysis. The experimentalmethod often takes a lot of time and human resources. Therefore, it is advisable tolearn how to calculate the residual lifetime using machine learning methods,particularly, neural networks, boosted trees, random forests, support-vectormachines and the method of k–nearest neighbors
Części książek na temat "AMg6 aluminum alloy"
Markushev, M. V., i M. Yu Murashkin. "Structure and Mechanical Behavior of the AMg6 Aluminum Alloy after Severe Plastic Deformation and Annealing". W Ultrafine Grained Materials II, 521–30. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118804537.ch59.
Pełny tekst źródłaSaikov, Ivan Vladimirovich, Andrey Yurevich Malakhov i Igor Vladimirovich Denisov. "Obtaining bimetallic sheets with cladding layer of aluminum alloy AMg6". W Application to Journal. Tambov University Reports. Series: Natural and Technical Sciences, 520–23. Publishing House “Derzhavinskiy”, 2018. http://dx.doi.org/10.20310/1810-0198-2018-23-123p-520-523.
Pełny tekst źródłaStreszczenia konferencji na temat "AMg6 aluminum alloy"
Prokhorov, V., A. Korobov, A. Kokshaiskii, S. Perfilov i A. Volkov. "Effect of nanostructuring on the elastic properties of aluminum alloy AMg6". W RECENT DEVELOPMENTS IN NONLINEAR ACOUSTICS: 20th International Symposium on Nonlinear Acoustics including the 2nd International Sonic Boom Forum. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4934461.
Pełny tekst źródłaKozhemyakina, A. "Experimental study of the effect of increasing technological plasticity during asymmetric rolling of aluminum alloys". W Superplasticity in Advanced Materials. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902615-36.
Pełny tekst źródłaProkhorov, Viacheslav, Alexander Korobov, Alex Kokshaiskii, Sergey Perfilov i Ivan Evdokimov. "Comparative characterization of the nonlinear elastic properties of aluminum alloy AMg6 and nanocarbon composite 0.3wt.%C60/AMg6 from third order elastic constants and ultrasonic nonlinear parameter measurements". W 2016 IEEE International Ultrasonics Symposium (IUS). IEEE, 2016. http://dx.doi.org/10.1109/ultsym.2016.7728807.
Pełny tekst źródłaChumaevsky, A. V., A. A. Eliseev, A. V. Filippov, V. E. Rubtsov i S. Yu Tarasov. "Tensile strength on friction stir processed AMg5 (5083) aluminum alloy". W ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Author(s), 2016. http://dx.doi.org/10.1063/1.4966320.
Pełny tekst źródłaChumaevsky, A. V., A. V. Gusarova, A. P. Zykova, A. O. Panfilov, E. S. Khoroshko, S. Yu Nikonov, L. L. Zhukov, V. A. Beloborodov i P. S. Sokolov. "FORMATION OF DEFECTS WHEN PRODUCING BIMETALLIC COMPOSITE MATERIALS BASED ON COPPER AND AMG5 ALUMINUM ALLOY DURING ELECTRON-BEAM 3D PRINTING". W Physical Mesomechanics of Materials. Physical Principles of Multi-Layer Structure Forming and Mechanisms of Non-Linear Behavior. Novosibirsk State University, 2022. http://dx.doi.org/10.25205/978-5-4437-1353-3-310.
Pełny tekst źródłaPetrov, M. A., D. A. Romashov i V. V. Isakov. "Application of Contactless Methods for Deformation Assessment During Erichsen Cupping Test of Aluminium Sheet Samples". W 33rd International Conference on Computer Graphics and Vision. Keldysh Institute of Applied Mathematics, 2023. http://dx.doi.org/10.20948/graphicon-2023-274-284.
Pełny tekst źródłaPushkov, V. A., S. A. Novikov, V. A. Sinitsyn, I. N. Govorunov i O. N. Ignatova. "Deformation of aluminum alloys AD-1, AMg-6 and D-16 at dynamic compression and temperatures of 25–250°C". W HIGH PERFORMANCE STRUCTURES AND MATERIALS 2006. Southampton, UK: WIT Press, 2006. http://dx.doi.org/10.2495/hpsm06033.
Pełny tekst źródła