Artykuły w czasopismach na temat „Air-Oil flow”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Air-Oil flow”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.
Li, Yang, Zhaojun Yang, Fei Chen i Jin Zhao. "Effect of air inlet flow rate on flow uniformity under oil-air lubrication". Industrial Lubrication and Tribology 70, nr 2 (12.03.2018): 282–89. http://dx.doi.org/10.1108/ilt-12-2016-0296.
Pełny tekst źródłaSun, Qi Guo, Zheng Hui Zhou, Hong Bo Lv i Yue Fei Wang. "Study on Distribution Performance of a New Oil-Air Distributor in Oil-Air Lubrication System". Advanced Materials Research 889-890 (luty 2014): 352–57. http://dx.doi.org/10.4028/www.scientific.net/amr.889-890.352.
Pełny tekst źródłaCui, Ziqiang, Chengyi Yang, Benyuan Sun i Huaxiang Wang. "Liquid Film Thickness Estimation using Electrical Capacitance Tomography". Measurement Science Review 14, nr 1 (1.02.2014): 8–15. http://dx.doi.org/10.2478/msr-2014-0002.
Pełny tekst źródłaLi, Li Quan, Shao Gang Liu, Jin Li Wang i Lin Cai. "The Research on Oil-Air Lubrication and Oil Lubrication Used in the Sliding Friction Element". Key Engineering Materials 486 (lipiec 2011): 283–86. http://dx.doi.org/10.4028/www.scientific.net/kem.486.283.
Pełny tekst źródłaWoods, G. S., P. L. Spedding, J. K. Watterson i R. S. Raghunathan. "Three-Phase Oil/Water/Air Vertical Flow". Chemical Engineering Research and Design 76, nr 5 (lipiec 1998): 571–84. http://dx.doi.org/10.1205/026387698525252.
Pełny tekst źródłaJablonská, Jana, Milada Kozubková i Marian Bojko. "Flow of Oil and Water through the Nozzle and Cavitation". Processes 9, nr 11 (28.10.2021): 1936. http://dx.doi.org/10.3390/pr9111936.
Pełny tekst źródłaCai, Lin, Jin Li Wang i Hong Tao Zheng. "Experiment and Numerical Study of Annular Flow Entrainment Mechanism in Oil-Air Lubrication Pipe". Advanced Materials Research 189-193 (luty 2011): 1782–85. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.1782.
Pełny tekst źródłaCheng, Sun-Wen, i Wen-Jei Yang. "Hysteresis in Oil Flow through a Rotating Tube with Twin Exit Branches". International Journal of Rotating Machinery 3, nr 4 (1997): 249–58. http://dx.doi.org/10.1155/s1023621x97000237.
Pełny tekst źródłaGuzmán, Enrique, Valente Hernández Pérez, Fernando Aragón Rivera, Jaime Klapp i Leonardo Sigalotti. "Comparative Study of Air–Water and Air–Oil Frictional Pressure Drops in Horizontal Pipe Flow". Fluids 9, nr 3 (7.03.2024): 67. http://dx.doi.org/10.3390/fluids9030067.
Pełny tekst źródłaTong, Bao Hong, Xiao Qian Sun i Hong Su. "Numerical Simulation on Internal Flow Field of Rolling Bearing under Oil-Air Lubrication". Applied Mechanics and Materials 271-272 (grudzień 2012): 1056–61. http://dx.doi.org/10.4028/www.scientific.net/amm.271-272.1056.
Pełny tekst źródłaHanks, James E., i Chester G. McWhorter. "Spray Droplet Size for Water and Paraffinic Oil Applied at Ultralow Volume". Weed Technology 7, nr 4 (grudzień 1993): 799–807. http://dx.doi.org/10.1017/s0890037x00037787.
Pełny tekst źródłaBrandt, Agata, Krystian Czernek, Małgorzata Płaczek i Stanisław Witczak. "Downward Annular Flow of Air–Oil–Water Mixture in a Vertical Pipe". Energies 14, nr 1 (23.12.2020): 30. http://dx.doi.org/10.3390/en14010030.
Pełny tekst źródłaLiu, Cong, Baohong Tong, Guotao Zhang, Wei Wang, Kun Liu i Peimin Xu. "Effect of behavior of oil–air lubrication flow on characteristic of point contact sliding wear". Industrial Lubrication and Tribology 71, nr 3 (8.04.2019): 381–89. http://dx.doi.org/10.1108/ilt-08-2018-0305.
Pełny tekst źródłaPietrzak, Marcin. "Flow patterns and gas fractions of air–oil and air–water flow in pipe bends". Chemical Engineering Research and Design 92, nr 9 (wrzesień 2014): 1647–58. http://dx.doi.org/10.1016/j.cherd.2013.12.008.
Pełny tekst źródłaYang, Xiao Ming, Jian Wen Chen, Lei Li, Jin Jin Liu i Yu Long Zhao. "Flow Field Simulation and Atomization Characteristic of Pneumatic Oil Mist Swirler". Advanced Materials Research 339 (wrzesień 2011): 400–405. http://dx.doi.org/10.4028/www.scientific.net/amr.339.400.
Pełny tekst źródłaZeng, Qunfeng, Jinhua Zhang, Jun Hong i Cheng Liu. "A comparative study on simulation and experiment of oil-air lubrication unit for high speed bearing". Industrial Lubrication and Tribology 68, nr 3 (11.04.2016): 325–35. http://dx.doi.org/10.1108/ilt-05-2015-0066.
Pełny tekst źródłaZhang, Wenliang, Xiaopeng Xie i Guogang Gao. "Transient formation theory of air-microbubble oil and testing its oil-spraying mechanism". AIP Advances 13, nr 3 (1.03.2023): 035321. http://dx.doi.org/10.1063/5.0134933.
Pełny tekst źródłaSun, Qi Guo, Xiong Shi Wang, Ying Wang i Zhi Hong Li. "The Characteristics of the Annular Flow through the Sudden-Expansion Pipe of the Oil-Air Lubrication System". Advanced Materials Research 889-890 (luty 2014): 358–62. http://dx.doi.org/10.4028/www.scientific.net/amr.889-890.358.
Pełny tekst źródłaWang, Jin Li, Li Quan Li i Lin Cai. "The Numerical Study of Oil Drop Jet from Oil-Air Lubrication Nozzle". Advanced Materials Research 201-203 (luty 2011): 361–64. http://dx.doi.org/10.4028/www.scientific.net/amr.201-203.361.
Pełny tekst źródłaDutra, Guilherme, Cicero Martelli, Marco Da Silva, Rodolfo Patyk i Rigoberto Morales. "Air Flow Detection in Crude Oil by Infrared Light". Sensors 17, nr 6 (3.06.2017): 1278. http://dx.doi.org/10.3390/s17061278.
Pełny tekst źródłaOKAZAKI, Tadao. "Measuring of Oil & Air Flow with Standing Microwave". Transactions of the Japan Society of Mechanical Engineers Series C 73, nr 731 (2007): 2161–66. http://dx.doi.org/10.1299/kikaic.73.2161.
Pełny tekst źródłaFarsetti, Silvia, Stefano Farisè i Pietro Poesio. "Experimental investigation of high viscosity oil–air intermittent flow". Experimental Thermal and Fluid Science 57 (wrzesień 2014): 285–92. http://dx.doi.org/10.1016/j.expthermflusci.2013.12.004.
Pełny tekst źródłaXu, G. P., K. W. Tou i C. P. Tso. "Two-Phase Void Fraction and Pressure Drop in Horizontal Crossflow Across a Tube Bundle". Journal of Fluids Engineering 120, nr 1 (1.03.1998): 140–45. http://dx.doi.org/10.1115/1.2819638.
Pełny tekst źródłaZheng, Xudong, Fangwei Xie, Diancheng Wu, Xinjian Guo, Bing Zhang, Van Xo Nguyen i Yun Wang. "CFD simulation of air effect on flow field characteristics of hydro-viscous clutch with constant speed difference". Mechanics & Industry 19, nr 2 (2018): 208. http://dx.doi.org/10.1051/meca/2018032.
Pełny tekst źródłaCheng, Sun-Wen, i Wen-Jei Yang. "Modeling of Two-Phase Flow through a Rotating Tube with Twin Exit Branches". International Journal of Rotating Machinery 6, nr 3 (2000): 159–66. http://dx.doi.org/10.1155/s1023621x00000154.
Pełny tekst źródłaSun, Qi Guo, Dong Xu Chen, Xiong Shi Wang i Zheng Hui Zhou. "Coanda Effect on the Impact of Distribution Characteristics of Oil-Air Annular Flow". Applied Mechanics and Materials 620 (sierpień 2014): 166–70. http://dx.doi.org/10.4028/www.scientific.net/amm.620.166.
Pełny tekst źródłaWu, Hao Tian, i Guo Ding Chen. "The Calculation of Two-Phase Gas/Liquid Homogenous Flow in Bearing Chambers". Materials Science Forum 532-533 (grudzień 2006): 717–20. http://dx.doi.org/10.4028/www.scientific.net/msf.532-533.717.
Pełny tekst źródłaSun, Qi Guo, Zheng Hui Zhou i Yue Fei Wang. "Experiment of Effects of Oil Volume-Per-Cycle on Oil Film’s Thickness under Oil-Air Lubrication". Applied Mechanics and Materials 620 (sierpień 2014): 476–80. http://dx.doi.org/10.4028/www.scientific.net/amm.620.476.
Pełny tekst źródłaZi, Xintian, Kai Chen, Qinghua Bai, Xinming Li, Xuyang Jin, Xu Wang i Feng Guo. "The Enhancement of Oil Delivery and Bearing Performance via A Guiding-Structured Nozzle under Oil–Air Lubrication". Lubricants 12, nr 2 (16.02.2024): 60. http://dx.doi.org/10.3390/lubricants12020060.
Pełny tekst źródłaJablonská, Jana, Milada Kozubková i Patrik Marcalík. "Experimental circuit for the generation of cavitation in oil flow". EPJ Web of Conferences 269 (2022): 01022. http://dx.doi.org/10.1051/epjconf/202226901022.
Pełny tekst źródłaSun, Qi Guo, Ali Cai, Zheng Hui Zhou, Zhi Hong Li i Xiong Shi Wang. "Analysis for the Fluctuation Characteristics of Annular Flow in the Oil-Air Lubrication System". Applied Mechanics and Materials 487 (styczeń 2014): 408–12. http://dx.doi.org/10.4028/www.scientific.net/amm.487.408.
Pełny tekst źródłaXu, Rang Shu, Juan Juan Wang, Wei Xu i Li Bo Liu. "Numerical DPM Model for Two-Phase Flow in Aero-Engine Bearing Chamber". Advanced Materials Research 201-203 (luty 2011): 2267–70. http://dx.doi.org/10.4028/www.scientific.net/amr.201-203.2267.
Pełny tekst źródłaLi, Miaomiao, Yu Wang, Weifang Chen i Rupeng Zhu. "Temperature rise characteristics for angular-contact ball bearings with oil-air lubrication based on fluid-solid conjugate heat transfer". Advances in Mechanical Engineering 13, nr 1 (styczeń 2021): 168781402199092. http://dx.doi.org/10.1177/1687814021990927.
Pełny tekst źródłaSun, Qi Guo, Ying Wang i Xiong Shi Wang. "Research on Coanda Effect Appeared in Oil-Air Annular Flow through the Conical Diffuser". Applied Mechanics and Materials 668-669 (październik 2014): 331–35. http://dx.doi.org/10.4028/www.scientific.net/amm.668-669.331.
Pełny tekst źródłaB, Guo. "Effect of Fluid Contact Angle of Oil-wet Ceramic Fracture Proppant on the Water Flow from Sandstones to Proppant Packs". Petroleum & Petrochemical Engineering Journal 6, nr 1 (2022): 1–9. http://dx.doi.org/10.23880/ppej-16000295.
Pełny tekst źródłaSun, Hengchao, Guoding Chen, Li’na Wang i Fei Wang. "Ligament and Droplet Generation by Oil Film on a Rotating Disk". International Journal of Aerospace Engineering 2015 (2015): 1–14. http://dx.doi.org/10.1155/2015/769862.
Pełny tekst źródłaDing, Wei Ya, Xue Wu Hu i Xiao Ming Sheng. "Double-Acting Air-Oil Intensifier Driven by Twin Roller Piston Air Cylinder". Applied Mechanics and Materials 220-223 (listopad 2012): 580–84. http://dx.doi.org/10.4028/www.scientific.net/amm.220-223.580.
Pełny tekst źródłaChait, Arnon, i Seppo A. Korpela. "The secondary flow and its stability for natural convection in a tall vertical enclosure". Journal of Fluid Mechanics 200 (marzec 1989): 189–216. http://dx.doi.org/10.1017/s0022112089000625.
Pełny tekst źródłaHikmah, Nurhikmah. "PENGOLAHAN MINYAK JELANTAH SEBAGAI PENGGANTI BAHAN BAKAR MINYAK PADA KOMPOR MINYAK BERTEKANAN". EduMatSains : Jurnal Pendidikan, Matematika dan Sains 7, nr 1 (5.07.2022): 65–76. http://dx.doi.org/10.33541/edumatsains.v7i1.3869.
Pełny tekst źródłaSuzuki, Isao, Ryo Tasaki, Kkenjiro Miki, Etsuji Kajita i Takanobu Yagi. "OIL LAYER FLOW AROUND SKIMMING VESSELS". International Oil Spill Conference Proceedings 1989, nr 1 (1.02.1989): 167–73. http://dx.doi.org/10.7901/2169-3358-1989-1-167.
Pełny tekst źródłaZhou, Hailun, Liang Fang, Ming Zhang, Gangyi Cao i Jianyang Su. "Study of the Effect of Static Eccentricity on Vibration Damping Properties of Squeeze Film Dampers Considering the Two-Phase Flow Case". Lubricants 12, nr 3 (27.02.2024): 75. http://dx.doi.org/10.3390/lubricants12030075.
Pełny tekst źródłaGalkin, A. F., I. V. Kurta, V. Yu Pankov i M. D. Ilinov. "Oil flow influence on accuracy of forecasting mine air temperatures". Neftyanoe khozyaystvo - Oil Industry 4 (2020): 98–100. http://dx.doi.org/10.24887/0028-2448-2020-4-98-100.
Pełny tekst źródłaFUJII, Senju, Ryosuke AMAYA i Masaharu KAMEDA. "Numerical simulation of oil-air flow in disengaged wet clutches". Proceedings of Conference of Kanto Branch 2021.27 (2021): 10E06. http://dx.doi.org/10.1299/jsmekanto.2021.27.10e06.
Pełny tekst źródłaHöhn, B. R., K. Michaelis i H. P. Otto. "Minimised gear lubrication by a minimum oil/air flow rate". Wear 266, nr 3-4 (luty 2009): 461–67. http://dx.doi.org/10.1016/j.wear.2008.04.037.
Pełny tekst źródłaPietrzak, Marcin, Małgorzata Płaczek i Stanisław Witczak. "Upward flow of air-oil-water mixture in vertical pipe". Experimental Thermal and Fluid Science 81 (luty 2017): 175–86. http://dx.doi.org/10.1016/j.expthermflusci.2016.10.021.
Pełny tekst źródłaJiang, Le, Yaguo Lyu, Yanjun Li, Yewei Liu, Yankun Hou i Zhenxia Liu. "Numerical and Experimental Investigations to Assess the Impact of an Oil Jet Nozzle with Double Orifices on the Oil Capture Performance of a Radial Oil Scoop". Aerospace 10, nr 12 (5.12.2023): 1015. http://dx.doi.org/10.3390/aerospace10121015.
Pełny tekst źródłaNaufal Annafi, Muhammad, Asman Ala i Jarot Delta Susanto. "Optimizing Air Compressor Productivity in Supporting Operational Activities on The Mt Ship. Gamalam". International Journal of Advanced Multidisciplinary 2, nr 2 (14.09.2023): 608–11. http://dx.doi.org/10.38035/ijam.v2i2.304.
Pełny tekst źródłaMykhailenko, Taras, Oleksandr Goridko i Illia Petukhov. "Особливості теплогідравлічних процесів у маслорадіаторі авіаційного газотурбінного двигуна". Aerospace Technic and Technology, nr 5 (3.10.2023): 50–56. http://dx.doi.org/10.32620/aktt.2023.5.03.
Pełny tekst źródłaAl-Ruhaimani, F., E. Pereyra, C. Sarica, E. M. Al-Safran i C. F. Torres. "Experimental Analysis and Model Evaluation of High-Liquid-Viscosity Two-Phase Upward Vertical Pipe Flow". SPE Journal 22, nr 03 (18.11.2016): 712–35. http://dx.doi.org/10.2118/184401-pa.
Pełny tekst źródłaLiu, He, Huiyun Cheng, Yu Dai i Xiang Zhu. "Atomization Characteristics of Special-Design Pneumatic Two-Fluid Nozzles for Helicopter Main Reducers: A Numerical and Experimental Investigation". Aerospace 9, nr 12 (15.12.2022): 834. http://dx.doi.org/10.3390/aerospace9120834.
Pełny tekst źródła