Rozprawy doktorskie na temat „Adhesive joints”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Adhesive joints”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Kon, Haruhiko. "Characterization of adhesively bonded joints using bulk adhesive properties". Thesis, This resource online, 1991. http://scholar.lib.vt.edu/theses/available/etd-01242009-063346/.
Pełny tekst źródłaSu, Ning. "Durability and fatique performance of structural adhesives and adhesive joints". Thesis, University of Dundee, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240601.
Pełny tekst źródłaKawashita, Luiz Fernando. "The peeling of adhesive joints". Thesis, Imperial College London, 2006. http://hdl.handle.net/10044/1/7720.
Pełny tekst źródłaKorenberg, Capucine Florence. "The durability of adhesive joints". Thesis, Imperial College London, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.272387.
Pełny tekst źródłaHutchinson, Allan Robert. "Durability of structural adhesive joints". Thesis, University of Dundee, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.245438.
Pełny tekst źródłaFeih, Stefanie. "Design of composite adhesive joints". Thesis, University of Cambridge, 2002. https://www.repository.cam.ac.uk/handle/1810/284008.
Pełny tekst źródłaBland, David Jonathan. "The durability of adhesive joints". Thesis, Imperial College London, 2009. http://hdl.handle.net/10044/1/5687.
Pełny tekst źródłaLittle, Matthew S. G. "The durability of structural adhesive joints". Thesis, Imperial College London, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.417769.
Pełny tekst źródłaSanchez, Francisco Sebastian Rodriguez. "Fracture Behaviour of Automotive Adhesive Joints". Thesis, Imperial College London, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.485405.
Pełny tekst źródłaBigwood, David Andrew. "The design of structural adhesive joints". Thesis, University of Surrey, 1990. http://epubs.surrey.ac.uk/770397/.
Pełny tekst źródłaNagda, Vinit Jethalal. "Virtual Material Testing of Adhesive Joints". Thesis, KTH, Hållfasthetslära, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-284467.
Pełny tekst źródłaBilindustrin visar ett ökande intresse för lim i mixmaterial-fogar. Moderna dimensioneringsmetoder är beroende av noggranna materialmodeller och korrekt materialdata för numeriska metoder för att kunna simulera prototyper tidigt i konstruktionsprocessen. Den här studien föreslår en approach med numerisk modellering för att simulera deformation och brott i limfogar som utsätts för olika laster. Modellen använder smeared crack - metoden som kombinerar plasticitet och skadeteori. Linjär Drucker-Prager plasticitet kopplas med skadeformulering för styvhetsdegradering för att modellera både plasticitet och mjuknande. Modellvalidering sker genom att jämföra predikteringen från modellen med experimentella provresultat från Double-Cantilever Beam (DCB) och End Notched Flexure (ENF) hållfasthetsprov. Provresultat för limfogar med tre olika limtjocklekar används. En numerisk FE analys av ett Mix-Mod Böjningsprov (MMB) görs för att bestämma mix-mod brottenveloppen för limfogen. Den vägoberoende J-integral-metoden används för att bestämma brottegenskaper (kritisk töjningsenergifrigörelse-hastighet, Gc) för mix-mod laster på limfogen. Inverkan av limtjockleken på mix-mod brottstyrkan undersöks. Den här modellen kompletterar en existerande analytisk modell som används på Volvo Cars för att utvärdera limhållfastheten med CAE, eftersom den här modellen ger bättre indata till den existerande modellen, utan omfattande provning.
Yu, Yang. "Investigation of stresses in adhesive joints". Thesis, Loughborough University, 2005. https://dspace.lboro.ac.uk/2134/35071.
Pełny tekst źródła關健明 i Kin-ming Kwan. "An expert system for adhesive-bonded joints". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1995. http://hub.hku.hk/bib/B31212347.
Pełny tekst źródłaKwan, Kin-ming. "An expert system for adhesive-bonded joints /". Hong Kong : University of Hong Kong, 1995. http://sunzi.lib.hku.hk/hkuto/record.jsp?B14038651.
Pełny tekst źródłaZavatta, Nicola. "Influence of adhesive thickness on adhesively bonded joints under fatigue loading". Master's thesis, Alma Mater Studiorum - Università di Bologna, 2015. http://amslaurea.unibo.it/9713/.
Pełny tekst źródłaButkus, Lawrence M. "Environmental durability of adhesively bonded joints". Diss., Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/19008.
Pełny tekst źródłaXu, Botao. "Fracture mechanisms and failure criteria of adhesive joints and toughened epoxy adhesives". Thesis, Queen Mary, University of London, 2010. http://qmro.qmul.ac.uk/xmlui/handle/123456789/371.
Pełny tekst źródłaSiu, Frederick Y. K. "Studies of microwaves applications for adhesive, weld joint and NDT technique". Swinburne Research Bank, 2007. http://hdl.handle.net/1959.3/36854.
Pełny tekst źródłaA thesis submitted for fulfillment of the requirement for the degree of Master of Engineering, Industrial Research Institute, Swinburne University of Technology - 2007. Typescript. Includes bibliographical references (p. 168-193).
Mubashar, Aamir. "Modelling degradation in adhesive joints subjected to fluctuating service conditions". Thesis, Loughborough University, 2010. https://dspace.lboro.ac.uk/2134/6336.
Pełny tekst źródłaTu, Yijun. "Water absorption and degradation in adhesive joints". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0002/MQ46087.pdf.
Pełny tekst źródłaAdams, Audrey Natasha Natalia. "The durability of organosilane pretreated adhesive joints". Thesis, Imperial College London, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.251962.
Pełny tekst źródłaRazak, Zeenah. "The durability performance of automotive adhesive joints". Thesis, Imperial College London, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.397238.
Pełny tekst źródłaCourt, R. S. "The long-term durability of adhesive joints". Thesis, University of Cambridge, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.598074.
Pełny tekst źródłaAnandarajah, Arumugam. "Fracture mechanics of adhesive joints in shear". Thesis, University of Dundee, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.357160.
Pełny tekst źródłaMartins, da Silva Lucas Filipe. "Adhesive joints for low and high temperatures". Thesis, University of Bristol, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.400421.
Pełny tekst źródłaREZAEI, MOHSEN. "Environmental effects on epoxy adhesive and joints". Doctoral thesis, Politecnico di Torino, 2012. http://hdl.handle.net/11583/2497165.
Pełny tekst źródłaPuthenparambil, Abhilash. "Effect of bonding pressure on reliability of anisotropic conductive adhesives [sic] joints in a silicon-to-flex-substrate interconnction". Diss., Online access via UMI:, 2006.
Znajdź pełny tekst źródłaLefebvre, Didier R. "The durability of adhesive joints: an engineering study". Diss., Virginia Polytechnic Institute and State University, 1988. http://hdl.handle.net/10919/52325.
Pełny tekst źródłaPh. D.
Richardson, Guy. "An investigation of interfacial failure of adhesive joints". Thesis, University of Surrey, 1993. http://epubs.surrey.ac.uk/843357/.
Pełny tekst źródłaFicarra, Christina Helene. "ANALYSIS OF ADHESIVE BONDED FIBER-REINFORCED COMPOSITE JOINTS". NCSU, 2001. http://www.lib.ncsu.edu/theses/available/etd-20010626-155040.
Pełny tekst źródłaThe work presented in this thesis involved the analysis of adhesive bonded joints for composite bridge decks and was divided into three phases. The first phase involved a parametric study on a single lap joint using ANSYS finite element analysis software. The purpose of the parametric study was to alter the geometry and material properties of the joint and study their effects on the stress distribution in both the adherends and adhesive. The four different cases studied included adding a taper to the adherends, different edge shapes on the adhesive layer, a material stiffness imbalance and a geometric stiffness imbalance. It was found that for the taper case and the edge shape case, the stress field in the joint was affected slightly. The material and geometric stiffness imbalance cases had the most drastic affect on the stress field of both the adhesive and adherend. Phase two of this study involved physical tests on single lap joints pulled in uniaxial tension. Tests were performed on three different types of laminates in order to study the interfacial effects these laminates had on the adhesive bond. It was found that by changing the surface of the composite, the mode of failure changed significantly.Phase three of this research involved a study on surface preparation. Three different surface preparations were conducted on the adherends of a butt-strap joint. The first included an acetone wipe. The second involved sanding the adherends. The third surface preparation involved adding APRIME-2, a secondary bonding agent, to the adherends before adding the strap. By simply sanding the adherends, the load to failure was increased by 350% compared to an acetone wipe. The ATPRIME-2 improved the load to failure by an additional 60% as well as improved the failure mode to a fiber tear. It was concluded that surface preparation has a major impact on the behavior of adhesively bonded joints.
Korin, Christer. "Fracture Behaviour of adhesive Joints in carton board". Licentiate thesis, Karlstad : Faculty of Technology and Science, Chemical Engineering, Karlstad University, 2007. http://www.diva-portal.org/kau/abstract.xsql?dbid=1191.
Pełny tekst źródłaSteidler, Silvana M. "Structural modelling of adhesive joints in automotive bodies". Thesis, Oxford Brookes University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.323906.
Pełny tekst źródła李雁婷 i Ralphaelynne Cochingyan Lee. "Investigation of epoxy and polychloroprene adhesive bonded joints". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1987. http://hub.hku.hk/bib/B3120823X.
Pełny tekst źródłaWebb, Peter W. "Investigation of the interphasial behaviour of adhesive joints". Thesis, Loughborough University, 2004. https://dspace.lboro.ac.uk/2134/14470.
Pełny tekst źródłaMays, Geoffrey Charles. "Fatigue performance and durability of structural adhesive joints". Thesis, University of Dundee, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.334180.
Pełny tekst źródłaMorshed, Syed Ahnaf. "Durability Properties of Nanomodified FRP-Concrete Adhesive Joints". Thesis, University of Louisiana at Lafayette, 2019. http://pqdtopen.proquest.com/#viewpdf?dispub=10844250.
Pełny tekst źródłaExternally bonded fiber-reinforced polymer (FRP) composites represent a simple and economical solution for many repair and strengthening applications in concrete structures. However, the potential occurrence of sudden and brittle debonding failure in such repairs becomes prominent when FRP-concrete bond undergoes environmental degradation induced by moisture. Ambient-cured low-viscosity Bisphenol A epoxy adhesives are most commonly utilized in the engineering practice to bond wet-layup FRP to the concrete substrate. This study aims to elucidate the effects of Bisphenol A-based epoxy modified with commercial surface-modified nanosilica (SMNS), core-shell rubber (CSR) nanoparticles and multi-walled carbon nanotubes (MWCNT) on the improvement of mechanical properties of the epoxy adhesives, and strength and durability of FRP-concrete adhesively bonded joints. Moisture ingress in epoxy, DSC, tensile test on epoxy and three-point bending beam bond tests were performed. To determine the effects of environmental degradation, all specimens were subjected to the following environments: control—23 °C at RH 50 ± 10% for 18 weeks; and accelerated conditioning protocol (ACP)—water immersion at 45 ± 1 °C for 18 weeks. Improvement in mechanical properties were observed in dogbone specimens modified with nanoparticles without any reduction in glass transition temperature (Tg). In control conditions, nanomodified epoxy groups exhibited enhanced mechanical properties compared to the neat epoxy. Following ACP, strength, elongation and modulus of elasticity of neat epoxy deteriorated significantly, while no significant deterioration was observed in the nanomodified group of adhesives. Among all the nanomodified adhesive groups CSR Type-1 showed most improvement in mechanical properties over neat epoxy group both in control condition and in ACP. CSR-modified adhesive joints experienced practically no degradation when subjected to ACP and showed the highest maximum bond strength retention of 100% among all the adhesive groups. The bond strength of neat epoxy adhesive joints degraded most dramatically (15%) following ACP.
O'Brien, Emmett P. "Durability of Adhesive Joints Subjected to Environemntal Stress". Diss., Virginia Tech, 2003. http://hdl.handle.net/10919/29139.
Pełny tekst źródłaPh. D.
Lee, Ralphaelynne Cochingyan. "Investigation of epoxy and polychloroprene adhesive bonded joints /". [Hong Kong] : University of Hong Kong, 1987. http://sunzi.lib.hku.hk/hkuto/record.jsp?B12359506.
Pełny tekst źródłaMcGovern, Scott. "The development of embedded sensors to assess the fatigue response of adhesive joints in marine environments". Access electronically, 2007. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20080911.154008/index.html.
Pełny tekst źródłaMalladi, Sailaja. "Parametric modeling and analysis of structural bonded joints". Morgantown, W. Va. : [West Virginia University Libraries], 2004. https://etd.wvu.edu/etd/controller.jsp?moduleName=documentdata&jsp%5FetdId=80.
Pełny tekst źródłaTitle from document title page. Document formatted into pages; contains x, 56 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 52-53).
Rider, A. N. Parslow D. "Progress report on activities in support of composite repair engineering development program tasks AF, AH and AI". Fishermans Bend, Victoria : Defence Science and Technology Organisation, 2006. http://hdl.handle.net/1947/4682.
Pełny tekst źródła蘇慶華 i Hing-wa So. "Strength of adhesive-bonded joints immersed in different solutions". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1992. http://hub.hku.hk/bib/B3121096X.
Pełny tekst źródłaYen, Hsin-Yi. "NEW ANALYSIS AND DESIGN PROCEDURES FOR ENSURING GAS TURBINE BLADES AND ADHESIVE BONDED JOINTS STRUCTURAL INTEGRITY AND DURABILITY". [Columbus, Ohio] : Ohio State University, 2000. http://www.ohiolink.edu/etd/send-pdf.cgi?osu967666610.
Pełny tekst źródłaIncludes vita. Title from title page display. Abstract. Advisor: M.-H. Herman Shen, Dept. of Aerospace Engineering, Applied Mechanics, and Aviation. Includes bibliographical references (p. 152-154).
Li, Shi. "Modeling of active crack damage control and the active fatique damage control of adhesive joint". Thesis, This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-08222009-040330/.
Pełny tekst źródłaKorin, Christer. "Mechanical Behaviour of Adhesive Joints in Cartonboard for Packaging". Doctoral thesis, Karlstads universitet, Avdelningen för kemiteknik, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-4731.
Pełny tekst źródłaLog, Audun Reinsborg. "Fatigue properties of adhesive joints in composite patch repair". Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for produktutvikling og materialer, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19034.
Pełny tekst źródłaVintilescu, Ion Virgil. "Mixed-mode I-II-III fracture of adhesive joints". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp01/MQ28870.pdf.
Pełny tekst źródłaSafavi-Ardebili, Vahid. "Micromechanical characterization of the interphase zone in adhesive joints". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0009/NQ35308.pdf.
Pełny tekst źródłaAllin, Jonathan Mark. "Disbond detection in adhesive joints using low frequency ultrasound". Thesis, Imperial College London, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.270834.
Pełny tekst źródłaFrantzis, Panagiotis Thesi. "Environmental attack on adhesive joints : a fracture mechanics approach". Thesis, Imperial College London, 1989. http://hdl.handle.net/10044/1/47440.
Pełny tekst źródła