Gotowe bibliografie tematyczne / Acoustic Ellipsometry

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Streszczenia konferencji

Gotowa bibliografia na temat „Acoustic Ellipsometry”

Autor: Grafiati
Data publikacji: 9 listopada 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Acoustic Ellipsometry”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Acoustic Ellipsometry"

1

Lucca, D. A., K. Herrmann, M. J. Klopfstein i F. Menelao. "Investigation of SiO2 thin films on Si substrates for use as standards for laser-acoustic measuring devices". International Journal of Materials Research 97, nr 9 (1.09.2006): 1212–15. http://dx.doi.org/10.1515/ijmr-2006-0190.

Pełny tekst źródła
Streszczenie:
Abstract We report on an investigation of the suitability of SiO2 thin films for use as calibration standards for the measurement of elastic modulus by laser-acoustic measuring devices. Film thicknesses for a range of thin film standards, originally developed for the calibration of ellipsometers, were obtained by X-ray reflectometry, ellipsometry, and metrological scanning force microscopy. Using the calibrated values of film thickness, a laser-acoustic method was used to obtain the elastic moduli of the thin films. Nanoindentation of the films, performed at two different laboratories was used to provide an independent measure of the elastic modulus values. The modulus values determined by nanoindentation and the laser-acoustic method were found to agree within 4.6 %, which was within the calculated uncertainty of the measurements performed. As a result of their high homogeneity with respect to film thickness and elastic modulus, their low surface roughness and the good laser-acoustic signal quality, the thin films investigated appear to hold promise as standards for laser-acoustic measuring devices.
Style APA, Harvard, Vancouver, ISO itp.
2

Nolot, E., A. Lefevre i J. N. Hilfiker. "Ellipsometry characterization of bulk acoustic wave filters". physica status solidi (c) 5, nr 5 (maj 2008): 1168–71. http://dx.doi.org/10.1002/pssc.200777795.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Urbanowicz, A. M., B. Meshman, D. Schneider i M. R. Baklanov. "Stiffening and hydrophilisation of SOG low-kmaterial studied by ellipsometric porosimetry, UV ellipsometry and laser-induced surface acoustic waves". physica status solidi (a) 205, nr 4 (kwiecień 2008): 829–32. http://dx.doi.org/10.1002/pssa.200777749.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Plikusiene, Ieva, Vincentas Maciulis, Arunas Ramanavicius i Almira Ramanaviciene. "Spectroscopic Ellipsometry and Quartz Crystal Microbalance with Dissipation for the Assessment of Polymer Layers and for the Application in Biosensing". Polymers 14, nr 5 (7.03.2022): 1056. http://dx.doi.org/10.3390/polym14051056.

Pełny tekst źródła
Streszczenie:
Polymers represent materials that are applied in almost all areas of modern life, therefore, the characterization of polymer layers using different methods is of great importance. In this review, the main attention is dedicated to the non-invasive and label-free optical and acoustic methods, namely spectroscopic ellipsometry (SE) and quartz crystal microbalance with dissipation (QCM-D). The specific advantages of these techniques applied for in situ monitoring of polymer layer formation and characterization, biomolecule immobilization, and registration of specific interactions were summarized and discussed. In addition, the exceptional benefits and future perspectives of combined spectroscopic ellipsometry and QCM-D (SE/QCM-D) in one measurement are overviewed. Recent advances in the discussed area allow us to conclude that especially significant breakthroughs are foreseen in the complementary application of both QCM-D and SE techniques for the investigation of polymer structure and assessment of the interaction between biomolecules such as antigens and antibodies, receptors and ligands, and complementary DNA strands.
Style APA, Harvard, Vancouver, ISO itp.
5

Chen, Hanying, Tianlin Li, Yifei Hao, Anil Rajapitamahuni, Zhiyong Xiao, Stefan Schoeche, Mathias Schubert i Xia Hong. "Remote surface optical phonon scattering in ferroelectric Ba0.6Sr0.4TiO3 gated graphene". Journal of Applied Physics 132, nr 15 (21.10.2022): 154301. http://dx.doi.org/10.1063/5.0106939.

Pełny tekst źródła
Streszczenie:
We report the effect of remote surface optical (RSO) phonon scattering on carrier mobility in monolayer graphene gated by ferroelectric oxide. We fabricate monolayer graphene transistors back-gated by epitaxial (001) Ba0.6Sr0.4TiO3 films, with field effect mobility up to 23 000 cm2 V−1 s−1 achieved. Switching ferroelectric polarization induces nonvolatile modulation of resistance and quantum Hall effect in graphene at low temperatures. Ellipsometry spectroscopy studies reveal four pairs of optical phonon modes in Ba0.6Sr0.4TiO3, from which we extract RSO phonon frequencies. The temperature dependence of resistivity in graphene can be well accounted for by considering the scattering from the intrinsic longitudinal acoustic phonon and the RSO phonon, with the latter dominated by the mode at 35.8 meV. Our study reveals the room temperature mobility limit of ferroelectric-gated graphene transistors imposed by RSO phonon scattering.
Style APA, Harvard, Vancouver, ISO itp.
6

Plikusiene, Ieva, Vincentas Maciulis, Vilius Vertelis, Silvija Juciute, Saulius Balevicius, Arunas Ramanavicius, Julian Talbot i Almira Ramanaviciene. "Revealing the SARS-CoV-2 Spike Protein and Specific Antibody Immune Complex Formation Mechanism for Precise Evaluation of Antibody Affinity". International Journal of Molecular Sciences 24, nr 17 (25.08.2023): 13220. http://dx.doi.org/10.3390/ijms241713220.

Pełny tekst źródła
Streszczenie:
The profound understanding and detailed evaluation of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike (SCoV2-S) protein and specific antibody interaction mechanism is of high importance in the development of immunosensors for COVID-19. In the present work, we studied a model system of immobilized SCoV2-S protein and specific monoclonal antibodies by molecular dynamics of immune complex formation in real time. We simultaneously applied spectroscopic ellipsometry and quartz crystal microbalance with dissipation to reveal the features and steps of the immune complex formation. We showed direct experimental evidence based on acoustic and optical measurements that the immune complex between covalently immobilized SCoV2-S and specific monoclonal antibodies is formed in two stages. Based on these findings it was demonstrated that applying a two-step binding mathematical model for kinetics analysis leads to a more precise determination of interaction rate constants than that determined by the 1:1 Langmuir binding model. Our investigation showed that the equilibrium dissociation constants (KD) determined by a two-step binding model and the 1:1 Langmuir model could differ significantly. The reported findings can facilitate a deeper understanding of antigen–antibody immune complex formation steps and can open a new way for the evaluation of antibody affinity towards corresponding antigens.
Style APA, Harvard, Vancouver, ISO itp.
7

Bouzzit, Aziz, Loïc Martinez, Andres Arciniegas, Stéphane Serfaty i Nicolas Wilkie-Chancellier. "Ellipsometry of surface acoustic waves using 3D vibrometry for viscoelastic material characterization by the estimation of complex Lamé coefficients versus the frequency". Applied Acoustics 228 (styczeń 2025): 110312. http://dx.doi.org/10.1016/j.apacoust.2024.110312.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Crooks, Richard M., Huey C. Yang, Laurel J. McEllistrem, Ross C. Thomas i Antonio J. Ricco. "Interactions between self-assembled monolayers and an organophosphonate Detailed study using surface acoustic wave-based mass analysis, polarization modulation-FTIR spectroscopy and ellipsometry". Faraday Discussions 107 (1997): 285–305. http://dx.doi.org/10.1039/a704586g.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

B, Chandar Shekar, Sulana Sundari, Sunnitha S i Sharmila C. "ARATION AND CHARACTERIZATION POLY (VINYLIDENE FLUORIDE-TRIFLUOROETHYLENE) COPOLYMER THIN FILMS FOR ORGANIC FERROELECTRIC FIELD EFFECT THIN FILM TRANSISTORS." Kongunadu Research Journal 2, nr 1 (30.06.2015): 7–10. http://dx.doi.org/10.26524/krj56.

Pełny tekst źródła
Streszczenie:
Polyvinylidene fluoride (PVDF) and Trifluoroethylene ((TrFE) are potential polymers which are used in acoustic transducers and electromechanical actuators because of their inherent piezoelectric response, as heat sensors because of their inherent pyroelectric response and as dielectric layer in organic thin filmtransistors. In the present study thin films of copolymer Poly(vinylidene fluoride-trifluoroethylene) were prepared by spin coating method for two different concentrations 2% to 8% and for various spin speeds from 2000 RPM to 5000 RPM. A P-type Si wafer was used as a substrate to deposit P(VDF-TrFE) thin films. 2-butanone was used as a solvent to prepare P(VDF-TrFE) solution. To study the annealing effect, the films were annealed for three different temperatures 50°C, 100° C and 175° C. Ellipsometry was used to measure the thickness of the films. The identification of the films prepared was done by using FTIR spectrophotometer. The structure of the films was studied by using small angle XRD. The morphology of the coated surface was investigated using SEM. It is observed that the thickness of the film coated depends on concentration, spin speed and annealing temperature. The XRD spectrum indicated the amorphous nature with crystallites of very low dimension. SEM micrographs also conforms the predominantly amorphous nature of the film surface. The observed smooth surface with amorphous structure indicated that these films could be used as dielectric layer in organic ferroelectric field effect thin film transistors.
Style APA, Harvard, Vancouver, ISO itp.
10

Nikolaev, Ivan V., Pavel V. Geydt, Nikolay G. Korobeishchikov, Aleksandr V. Kapishnikov, Vladimir A. Volodin, Ivan A. Azarov, Vladimir I. Strunin i Evgeny Y. Gerasimov. "The Influence of Argon Cluster Ion Bombardment on the Characteristics of AlN Films on Glass-Ceramics and Si Substrates". Nanomaterials 12, nr 4 (17.02.2022): 670. http://dx.doi.org/10.3390/nano12040670.

Pełny tekst źródła
Streszczenie:
In this paper, the influence of surface modification on the characteristics and properties of AlN thin films on Si and glass-ceramics substrates is investigated. The surface modification was made at various parameters of argon cluster ions. By using XRD and Raman spectroscopy, it was shown that the obtained AlN films have a hexagonal structure with a characteristic direction of texturing along the c axis and slight deviations from it. A comparison of the AlN surface morphology obtained by atomic force microscopy before and after cluster processing was demonstrated. This demonstrated that the cluster ions with low energy per atom (E/N = 10 eV/atom) have a high efficiency of surface smoothing. A decrease in the intensity of the Raman peaks and an increase in their full-width after bombardment with cluster ions were found, which may be caused by a change in the physicochemical state of the surface. The optical properties, the quality of the boundaries, and the distribution map of the thickness of the functional layer of AlN were investigated by the methods of spectral and spatial resolution ellipsometry. By using the cross-sectional SEM, the direction of crystallite texturing was demonstrated. The influence of argon cluster ion bombardment on the stoichiometry of samples was analyzed by EDX spectroscopy. The results obtained demonstrate the efficiency of the cluster ion smoothing of polycrystalline thin films for microelectronics, particularly when creating surface acoustic wave resonators.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Acoustic Ellipsometry"

1

Bouzzit, Aziz. "Ellipsométrie acoustique pour le suivi et la caractérisation de matériaux complexes". Electronic Thesis or Diss., CY Cergy Paris Université, 2024. http://www.theses.fr/2024CYUN1304.

Pełny tekst źródła
Streszczenie:
Les matériaux complexes sont aujourd'hui au cœur des enjeux sociétaux majeurs dans la plupart des grands domaines tels que l'énergie, le transport, l'environnement, la conservation/restauration du patrimoine, la santé ou la sécurité. En effet, de par les opportunités d'innovation offertes en matière de fonctionnalités, ces matériaux suscitent de nouvelles problématiques d'analyse et de compréhension multi-physiques et multi-échelles. Il en va de même pour l'instrumentation nécessaire à leur caractérisation.Répandues dans le domaine de la caractérisation non destructive des milieux complexes, les méthodes acoustiques utilisent les propriétés de propagation des ondes mécaniques dans ces matériaux pouvant être hétérogènes et anisotropes.Dans une approche multi-échelle, l'intérêt des méthodes ultrasonores est d'être particulièrement sensibles à leurs propriétés mécaniques, telles que l'élasticité, la rigidité et la viscosité. La nature hétérogène et multiphasique d'un milieu complexe conduit ainsi à la notion de milieu viscoélastique, caractérisé par les coefficients de Lamé généralisés complexes (��∗, ��∗) et leur variation en fonction de la fréquence.L'objectif de cette thèse est de développer une méthode de caractérisation de ces matériaux complexes viscoélastiques qui permette de mesurer simultanément la variation des deux coefficients de Lamé généralisés complexes (��∗, ��∗) en fonction de la fréquence. L'approche proposée est de suivre, dans l'espace et dans le temps, la propagation de l'onde de Rayleigh et d'extraire ses paramètres ellipsométriques (ellipticité χ et orientation θ) en complément des paramètres propagatifs (k' et k'') classiquement déterminés. Basée sur la détection de l'onde par vibrométrie laser 3D à la surface du matériau complexe, et au moyen de l'analyse de Gabor 2D dans l'espace des Quaternions, l'estimation de l'ensemble des paramètres - propagatifs et ellipsométriques - donne accès à la caractérisation complète du milieu avec cette seule onde de Rayleigh.Les développements théoriques proposés dans ce travail, ainsi que les résultats expérimentaux et issus de simulation, confirment l'intérêt de l'ellipsométrie acoustique pour la caractérisation de ces matériaux complexes
Complex materials are at the heart of major societal challenges in most major fields such as energy, transport, environment, heritage conservation/restoration, health and safety. Because of the opportunities for innovation offered in terms of features, these materials are giving rise to new problems of multi-physical and multi-scale analysis and understanding. The same applies to the instrumentation needed to characterize them.Acoustic methods, which are widely used in the non-destructive characterization of complex media, make use of the propagation properties of mechanical waves in these materials, which can be heterogeneous and anisotropic.In a multi-scale approach, the advantage of ultrasonic methods is that they are particularly sensitive to mechanical properties such as elasticity, rigidity and viscosity. The heterogeneous and multiphase nature of a complex medium thus leads to the notion of a viscoelastic medium, characterized by generalized complex Lamé coefficients (��∗, ��∗) and their variation as a function of frequency.The objective of this thesis is to develop a method for characterizing these complex viscoelastic materials that simultaneously measures the variation of the two generalized complex Lamé coefficients (��∗, ��∗) versus the frequency. The proposed approach is to follow, in space and in time, the propagation of the Rayleigh wave and to extract its ellipsometric parameters (ellipticity χ and orientation θ) in addition to the propagation parameters (k' and k'') conventionally determined. Based on the wave detection by 3D laser vibrometry at the surface of the complex material, and by means of 2D Gabor analysis in Quaternion space, the estimation of propagation and ellipsometric parameters gives access to the complete characterization of the complex material only by studying the interaction of a Rayleigh wave with the medium.The theoretical developments proposed in this work, together with experimental and simulation results, confirm the value of acoustic ellipsometry for characterizing these complex materials
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Acoustic Ellipsometry"

1

Espinoza, Shirly, Yael Gutiérrez, Sébastien Cueff, Krishna P. Khakurel, Saul Vazquez Miranda, Martin Zahradník, Mateusz Rebarz i Jakob Andreasson. "Study of acoustic phonon propagation by femtosecond ellipsometry". W Ultrafast Optics. Washington, D.C.: Optica Publishing Group, 2023. http://dx.doi.org/10.1364/ufo.2023.p2.23.

Pełny tekst źródła
Streszczenie:
Acoustic phonons are generated by the arrival of a femtosecond laser pulse to the surface of a material. By femtosecond pump-probe ellipsometry on thin films and bulk materials, we could discern between different types of transient phenomena including the ones due to the propagation of these photo-induced acoustic waves.
Style APA, Harvard, Vancouver, ISO itp.
2

Chen, Juequan, Eric Louis, Fred Bijkerk, Chris J. Lee, Herbert Wormeester, Reinhard Kunze, Hagen Schmidt i in. "Ellipsometric and surface acoustic wave sensing of carbon contamination on EUV optics". W SPIE Advanced Lithography, redaktorzy Frank M. Schellenberg i Bruno M. La Fontaine. SPIE, 2009. http://dx.doi.org/10.1117/12.824435.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Bouzzit, A., A. Arciniegas, L. Martinez, S. Serfaty i N. Wilkie-Chancellier. "Ultrasonic surface wave parameters monitoring using 3D vibrometry and ellipsometry for local material characterization". W 10th Convention of the European Acoustics Association Forum Acusticum 2023. Turin, Italy: European Acoustics Association, 2022. http://dx.doi.org/10.61782/fa.2023.0815.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Taura, Hiroo, Toshihiko Takaki, Masahiro Kawaguchi, Satoru Kaneko i Takahisa Kato. "The Effect of Thin Lubricant Films on Acoustic Emission Characteristics". W World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-64256.

Pełny tekst źródła
Streszczenie:
This paper shows the effect of ultrathin lubricant films between sliding bodies on Acoustic Emission (AE) signals induced by the sliding friction. Experiments were conducted with a ball-on-disk friction tester to measure the friction coefficient, the raw AE signals and the root-mean-squarevalues of the AE signals (the AErms signals). The ball was a glass ball of 5mm diameter. The disk was a magnetic disk used for 2.5 inch HDD with a DLC protective layer on its surface, and was coated with PFPE Z-dol 4000 about 1.5nm thick. The AErms signals kept a low level for some time after the start of the test, and then increased. Its time variation was similar to that of friction coefficient. After the friction test, the circumferential distribution of the lubricant film thickness was measured with an ellipsometer. The distribution demonstrated the reduction of the lubricant film thickness at the circumferential position where the magnitude of AE signals became large. These facts showed that the AE signals correlated well with the lubricant film thickness.
Style APA, Harvard, Vancouver, ISO itp.
5

Zayer, N. K., A. J. C. Grellier, C. N. Pannell, R. Greef, K. Rogers i M. Zervas. "In situ ellipsometric monitoring of growth of zinc oxide thin films with applications to high-frequency fiber acousto-optic components". W Technical Digest Summaries of papers presented at the Conference on Lasers and Electro-Optics Conference Edition. 1998 Technical Digest Series, Vol.6. IEEE, 1998. http://dx.doi.org/10.1109/cleo.1998.676127.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Tagawa, Norio, Yoshiaki Tashiro i Atsunobu Mori. "Effects of End-Group Functionality and Molecular Weight of Ultra-Thin Liquid Lubricant Films on Contact Slider Dynamics in Hard Disk Drives". W ASME/STLE 2004 International Joint Tribology Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/trib2004-64193.

Pełny tekst źródła
Streszczenie:
This paper describes the effect of end-group functionality and molecular weight of ultra-thin liquid lubricant films on contact slider dynamics in hard disk drives. In the experiments, the contact slider dynamics as well as ultra-thin liquid lubricants behavior are investigated using three kinds of lubricants which have different end-groups and molecular weight as a function of lubricant film thickness. The dynamics of a contact slider is mainly monitored using Acoustic Emission (AE). The disks are also examined with a scanning micro-ellipsometer before and after contact slider experiments. It is found that the lubricant film thickness instability due to de-wetting occurs as a result of slider-disk contacts, when the lubricant film thickness is thicker than one monolayer. Their unstable lubricant behavior depends on the chemical structure of functional end-groups and molecular weight. In addition, it is also found that the AE RMS values, which indicate the contact slider dynamics, are almost equivalent, independent of the end-groups and molecular weight for the lubricants, when the lubricant film thickness is around one monolayer. The molecular weight, however, affects the contact slider dynamics, when the lubricant film thickness is less than one monolayer. In other words, the AE RMS values increase remarkably as the molecular weight for the lubricant increases. When the lubricant film thickness is more than one monolayer, the AE RMS values decrease because of the effect of mobile lubricant layer, while the lubricant de-wetting instability affects the contact slider dynamics. Therefore, it would be concluded that the lubricant film thickness should be designed to be around one monolayer thickness region in order to achieve contact recording for future head-disk interface.
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Acoustic Ellipsometry” dla poszczególnych typów źródeł:
Artykuły w czasopismach
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii