Letteratura scientifica selezionata sul tema "Viscoplastic properties"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Viscoplastic properties".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Viscoplastic properties"
Valisetty, R. R., e J. L. Teply. "Overall Instantaneous Viscoplastic Properties of Composites". Journal of Composite Materials 26, n. 12 (dicembre 1992): 1708–24. http://dx.doi.org/10.1177/002199839202601201.
Testo completoTarhini, Z., S. Jarny e A. Texier. "Viscoplastic properties of laponite-CMC mixes". Data in Brief 11 (aprile 2017): 581–87. http://dx.doi.org/10.1016/j.dib.2017.02.002.
Testo completoHeffes, M. J., e H. F. Nied. "Analysis of Interfacial Cracking in Flip Chip Packages With Viscoplastic Solder Deformation". Journal of Electronic Packaging 126, n. 1 (1 marzo 2004): 135–41. http://dx.doi.org/10.1115/1.1649242.
Testo completoAhmadi, H. R., J. G. R. Kingston e A. H. Muhr. "Dynamic Properties of Filled Rubber — Part I: Simple Model, Experimental Data and Simulated Results". Rubber Chemistry and Technology 81, n. 1 (1 marzo 2008): 1–18. http://dx.doi.org/10.5254/1.3548196.
Testo completoMolinari, Alain. "Averaging Models for Heterogeneous Viscoplastic and Elastic Viscoplastic Materials". Journal of Engineering Materials and Technology 124, n. 1 (18 giugno 2001): 62–70. http://dx.doi.org/10.1115/1.1421052.
Testo completoJalaal, Maziyar, Dave Kemper e Detlef Lohse. "Viscoplastic water entry". Journal of Fluid Mechanics 864 (11 febbraio 2019): 596–613. http://dx.doi.org/10.1017/jfm.2019.32.
Testo completoHuber, N., e E. Tyulyukovskiy. "A new loading history for identification of viscoplastic properties by spherical indentation". Journal of Materials Research 19, n. 1 (gennaio 2004): 101–13. http://dx.doi.org/10.1557/jmr.2004.19.1.101.
Testo completoFotiu, Peter A., e Sia Nernat-Nasser. "Overall properties of elastic-viscoplastic periodic composites". International Journal of Plasticity 12, n. 2 (gennaio 1996): 163–90. http://dx.doi.org/10.1016/s0749-6419(96)00002-2.
Testo completoGiginyak, F. F., T. N. Mozharovskaya e V. V. Bashta. "Assessment of Viscoplastic Properties of Titanium Alloys". Strength of Materials 37, n. 3 (maggio 2005): 254–59. http://dx.doi.org/10.1007/s11223-005-0037-7.
Testo completoVincent, Y., J. M. Bergheau, J. B. Leblond e J.-F.Jullien. "An experimental mock-up for the study of steel behaviour at high temperature during phase transformation". Journal de Physique IV 120 (dicembre 2004): 161–68. http://dx.doi.org/10.1051/jp4:2004120018.
Testo completoTesi sul tema "Viscoplastic properties"
Österlöf, Rickard. "Modelling the viscoplastic properties of carbon black filled rubber : A finite strain material model suitable for Finite Element Analysis". Doctoral thesis, KTH, MWL Marcus Wallenberg Laboratoriet, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-184879.
Testo completoEn ökad miljömedvetenhet, juridiska krav och den stora delen av de totala kostnaderna som kan hänföras till bränslekostnader är alla incitament för fordonsindustrin att minska bränsleförbrukningen. Den optimala drivlinan för att möjliggöra denna minskning beror på driftförhållanden och den tillgängliga infrastrukturen. Dessutom ställs höga krav på utvecklingen av drivlineisolatorer, eftersom kraven på buller och vibrationer (NVH) är desamma oavsett drivlina. För detta ändamål kan datorstödda beräkningar användas för att utvärdera ett stort antal konfigurationer. Dessa beräkningar är, i bästa fall, endast så bra som de använda materialmodellerna. Inom en överskådlig framtid kommer gummi med förstärkande fyllmedel användas i vibrationsisolatorer för att erhålla de önskade egenskaperna hos dessa komponenter. Men styvheten och dämpningen i gummi med förstärkande fyllmedel är kraftigt icke-linjära funktioner, och de tillgängliga materialmodellerna i kommersiella programvaror och i litteraturen är ofta otillräckliga. Därför är en viskoplastisk materialmodell för finita deformationer framtagen i tidsdomänen och implementeras som ett användardefinierat material i Abaqus Explicit. Modellen fångar töjningsamplitud- och frekvensberoendet av lagrings- och förlustmodulen för ett kimröksfyllt naturgummi. Den är korrekt över ett brett intervall av skjuvtöjningsamplituder och frekvenser, 0.2-50% respektive 0.5-20 Hz, och kräver endast 5 materialparametrar. Dessutom fångar modeller responsen från bimodala excitationer. Implementeringen i Abaqus Explicit gör att komponentegenskaper kan utvärderas tidigt i utvecklingsfasen, med materialparametrar som härrör från enkla provkroppar. Den förbättrade noggrannheten i simuleringar av dessa komponenter kan hjälpa ingenjörer att utveckla mer optimerade lösningar snabbare än med konventionella metoder.
QC 20160406
Rmili, Yosra. "ÉTUDE DE LA DILATANCE DE REYNOLDS DU BÉTON ET DE SON EFFET SUR LA FORMATION DE LA COUCHE DE LUBRIFICATION DANS LES TUYAUX DE POMPAGE". Electronic Thesis or Diss., CY Cergy Paris Université, 2024. http://www.theses.fr/2024CYUN1283.
Testo completoConcrete pumping process is important in the construction sector, facilitating the transport of fresh concrete to the casting site, even in difficult-to-access areas. This technique enables the achievement of considerable heights and distances. However, this process presents challenges. Therefore, accurately predicting the pumpability of concrete appears to be essential. Indeed, concrete pumpability relies on its rheological properties and its ability to form a lubrication layer (LL) during its flow through pipes. Accordingly, it is worthy to mention that mastering the rheology of concrete and understanding the characteristics of the LL is important, especially considering that the mechanisms of LL formation remain not well understood.This project focuses on investigating Reynolds dilatancy (RD), a potential mechanism involved in LL formation, and aims to highlight the key parameters governing it. The first part of the study introduces the development of a new method to assess shear-induced variations (RD) at free-surface flow. This method, although more reliable for conventional vibrated concrete (CVC), it does not fully explore this mechanism. Consequently, a new empirical device, the CRD-Test, was designed to evaluate the RD of self-compacting concrete (SCC) subjected to various scenarios under free-surface and pressurized conditions, simulating real casting and pumping processes. In this second part of the study, SCC is considered as a biphasic mixture of coarser particles (> 1.25 mm) in a fluid matrix of fine mortar (< 1.25 mm). Moreover, the new experimental device, named CRD-Test, offers wide range of shear and pressure levels. It is based on a modified coaxial cylinder tribometer, with a rotational speed ranging from 0 to 3 rps, and an air pressure regulator from 0 to 300 kPa. The RD phenomenon is manifested by fluctuations in lateral pressure measured at the outer cylinder of this apparatus and it was investigated through new indices.Experimental results reveal that RD values were found to be in good agreement with the workability and design parameters of the investigated concrete mixtures. Concrete with low fluidity values exhibited high RD indices under both free-surface and pressurized shear conditions. Furthermore, a biphasic approach highlights correlations between RD and the characteristics of aggregates with a diameter greater than 1.25 mm, as well as the viscoplastic characteristics of the fine mortar (i.e., the suspending phase). Moreover, RD results are mainly affected by the relative packing density of coarse aggregate during pumping process. Finally, Reynold values were in good agreement with flow regime characteristics, particle dynamics, and shear-induced particle migration indices. According to established correlations, dynamic segregation can significantly influence the mechanisms of LL formation during concrete pumping at low shear rates, illustrating the importance of Reynolds dilatancy in this process. However, at higher shear rates, dynamic segregation has been observed to negatively impact RD values, thereby increasing the risk of blockage during concrete pumping
Goel, Priya. "Extraction of Equivalent Uniaxial Plastic and Viscoplastic Behavior from Bending Using a Mechanistic Approach". Thesis, 2022. https://etd.iisc.ac.in/handle/2005/5863.
Testo completoARDB 0242, IMPRINT 0009
Libri sul tema "Viscoplastic properties"
Freed, Alan David. Viscoplastic model development with an eye toward characterization. [Washington, D.C: National Aeronautics and Space Administration, 1995.
Cerca il testo completo1932-, Simitses George J., e Lewis Research Center, a cura di. Thermo-elasto-viscoplastic analysis of problems in extension and shear. [Cleveland, Ohio?: National Aeronautics and Space Administration, Lewis Research Center, 1987.
Cerca il testo completo1932-, Simitses George J., e Lewis Research Center, a cura di. Thermo-elasto-viscoplastic analysis of problems in extension and shear. [Cleveland, Ohio?: National Aeronautics and Space Administration, Lewis Research Center, 1987.
Cerca il testo completo1952-, Saleeb Atef F., Castelli Michael G e United States. National Aeronautics and Space Administration., a cura di. A fully associative, nonisothermal, nonlinear kinematic, unified viscoplastic model for titanium alloys. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.
Cerca il testo completoFreed, Alan David. A viscoplastic model with application of LiF-22%CaF₂ hypereutectic salt. [Washington, D.C.]: National Aeronautics and Space Administration, 1990.
Cerca il testo completo1932-, Simitses George J., e Lewis Research Center, a cura di. The dynamic aspects of thermo-elasto-viscoplastic snap-through and creep buckling phenomena. [Cleveland, Ohio?: National Aeronautics and Space Administration, Lewis Research Center, 1987.
Cerca il testo completoCapitoli di libri sul tema "Viscoplastic properties"
Nemat-Nasser, S., B. Balendran e Muneo Hori. "Bounds for Overall Nonlinear Elastic or Viscoplastic Properties of Heterogeneous Solids". In IUTAM Symposium on Microstructure-Property Interactions in Composite Materials, 215–21. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0059-5_18.
Testo completoTan, Qinwen, e Huiming Tang. "In Situ Triaxial Creep Test on Gravelly Slip Zone Soil of a Giant Landslide: Innovative Attempts and Findings". In Progress in Landslide Research and Technology, Volume 1 Issue 2, 2022, 109–21. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-18471-0_9.
Testo completoBauer, Harro, e Norbert Boese. "Rheological Properties of a Micelle System in Solution to be Used as Reference Liquid with Viscoplastic Behaviour". In Third European Rheology Conference and Golden Jubilee Meeting of the British Society of Rheology, 37–40. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0781-2_20.
Testo completoWang, Zhijie, Mark J. Golob e Naomi C. Chesler. "Viscoelastic Properties of Cardiovascular Tissues". In Viscoelastic and Viscoplastic Materials. InTech, 2016. http://dx.doi.org/10.5772/64169.
Testo completoNishitani, Yosuke, Toshiyuki Yamanaka, Tetsuto Kajiyama e Takeshi Kitano. "Thermal Properties of Hemp Fiber Reinforced Plant-Derived Polyamide Biomass Composites and their Dynamic Viscoelastic Properties in Molten State". In Viscoelastic and Viscoplastic Materials. InTech, 2016. http://dx.doi.org/10.5772/64215.
Testo completoPonce-García, Néstor, Benjamín Ramírez-Wong, Anayansi Escalante-Aburto, Patricia I. Torres-Chávez e Juan de Dios Figueroa-Cárdenas. "Mechanical Properties in Wheat (Triticum aestivum) Kernels Evaluated by Compression Tests: A Review". In Viscoelastic and Viscoplastic Materials. InTech, 2016. http://dx.doi.org/10.5772/64171.
Testo completoNishitani, Yosuke, e Takeshi Kitano. "Rheological Properties of Carbon Nanofiber-Filled Polyamide Composites and Blend of these Composites and TPE". In Viscoelastic and Viscoplastic Materials. InTech, 2016. http://dx.doi.org/10.5772/64531.
Testo completoKobayashi, Shiro, Soo-Ik Oh e Taylan Altan. "Thermo-Viscoplastic Analysis". In Metal Forming and the Finite-Element Method. Oxford University Press, 1989. http://dx.doi.org/10.1093/oso/9780195044027.003.0015.
Testo completo"Computer simulation of consistency and rheology tests of fresh concrete by viscoplastic finite element method". In Properties of Fresh Concrete, 311–18. CRC Press, 1990. http://dx.doi.org/10.1201/9781482267495-45.
Testo completoBOUALI, A., e C. TETE. "Viscoplastic Properties of an Fe–Cr–P–C Amorphous Alloy". In Rapidly Quenched Metals 6, 493–96. Elsevier, 1988. http://dx.doi.org/10.1016/b978-1-85166-971-4.50102-x.
Testo completoAtti di convegni sul tema "Viscoplastic properties"
Zhang, Qian, Abhijit Dasgupta e Peter Haswell. "Viscoplastic Constitutive Properties and Reliability of Lead-Free Sn3.9Ag0.6Cu Solder". In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-41840.
Testo completoLeslie, D., e A. Dasgupta. "Viscoplastic properties of pressure-less sintered silver materials using indentation". In 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). IEEE, 2016. http://dx.doi.org/10.1109/eurosime.2016.7463371.
Testo completoAl Shrah, M., e Isam Janajreh. "Mechanical recycling of cross-link polyethylene: Assessment of static and viscoplastic properties". In 2013 International Renewable and Sustainable Energy Conference (IRSEC). IEEE, 2013. http://dx.doi.org/10.1109/irsec.2013.6529674.
Testo completoHeffes, M. J., e H. F. Nied. "Analysis of Interface Cracking in Flip Chip Packages With Viscoplastic Solder Deformation". In ASME 2003 International Electronic Packaging Technical Conference and Exhibition. ASMEDC, 2003. http://dx.doi.org/10.1115/ipack2003-35346.
Testo completoJiang, Qian, Subhasis Mukherjee, Bastian Vogt, Abhijit Dasgupta, David Shaddock e Liang Yin. "Mechanical Constitutive Properties of Two High-Temperature Lead-Rich Solders". In ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/ipack2015-48708.
Testo completoIceri, Daiane Mieko, Jorge Luiz Biazussi, Charlie van der Geest, Roney Leon Thompson e Marcelo Souza de Castro. "Analysis of Carbopol And Triethanolamine Concentration in The Viscoplastic Properties of Aqueous Solution". In The 8th World Congress on Mechanical, Chemical, and Material Engineering. Avestia Publishing, 2022. http://dx.doi.org/10.11159/htff22.166.
Testo completoRauchs, G., e J. Bardon. "Identification of elasto-viscoplastic material properties from indentation testing using an inverse method". In CONTACT/SURFACE 2009. Southampton, UK: WIT Press, 2009. http://dx.doi.org/10.2495/secm090121.
Testo completoVaghefpour, Hossein, e Ali Nayebi. "Drilling Thrust and Torque Prediction of Viscoplastic Materials". In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95246.
Testo completoCazacu, Oana, e N. D. Cristescu. "Analysis of Steady-State Penetration in Viscoplastic Porous Materials". In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-61221.
Testo completoJalouli, Zahra, Wilson Maia, Noura Haidar e Anatoli Serghei. "Evaluation of warpage of FOWLP considering the viscoelastic and viscoplastic properties of Epoxy Molding Compound". In 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). IEEE, 2024. http://dx.doi.org/10.1109/eurosime60745.2024.10491575.
Testo completo