Libri sul tema "Titanium and composite materials"

Naik, Rajiv A. Observations of fatigue crack initiation and damage growth in notched titanium matrix composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

Ant︠s︡iferov, V. N. Kompozit︠s︡ionnye materialy i konstrukt︠s︡ii na osnove titana i ego soedineniĭ: Monografii︠a︡. Novosibirsk: In-t gidrodinamiki im. M.A. Lavrentʹeva SO RAN, 2001.

1935-, Wightman James P., e Langley Research Center. Materials Division., a cura di. Fracture surface analysis in composite and titanium bonding: Semi-annual report. Blacksburg, VA: Chemistry Dept., Virginia Polytechnic Institute & State University, 1985.

Davim, J. Paulo, R. Zitoune e V. Krishnaraj. Machining of titanium alloys and composites for aerospace applications: Special topic volume with invited peer reviewed papers only. Durnten-Zurich: Trans Tech Publications, 2013.

Ltjering, G. Titanium. Berlin: Springer, 2003.

H, Froes F., Suryanarayana C, Ward-Close C. M, ASM International. Materials Synthesis and Processing Committee., Minerals, Metals and Materials Society. Materials Design and Manufacturing Division. e Minerals, Metals and Materials Society. Fall Meeting, a cura di. Synthesis/processing of lightweight metallic materials: Proceedings of a symposium held during the TMS annual meeting in Las Vegas, Nevada, February 13-16, 1995. Warrendale, Pa: The Society, 1995.

S, Johnson W., e Langley Research Center, a cura di. Modeling fatigue crack growth in cross ply titanium matrix composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1993.

O, Soboyejo W., Srivatsan T. S, Davidson D. L e Minerals, Metals and Materials Society. Structural Materials Division., a cura di. Fatigue and fracture of ordered intermetallic materials I: Proceedings of a symposium sponsored by the Structural Materials Division (SMD) of the Minerals, Metals & Materials Society (TMS), held during Materials Week '93 in Pittsburgh, PA, October 17-21, 1993 hosted by the Materials, Metals & Materials Society (TMS), and the Materials Information Society (ASM International). Warrendale, Pa: Minerals, Metals & Materials Society, 1994.

United States. National Aeronautics and Space Administration., a cura di. Isothermal fatigue behavior of a [90] Sic/Ti-15-3 composite at 426 C. [Washington, D.C.]: NASA, 1991.

A, Bartolotta P., e United States. National Aeronautics and Space Administration., a cura di. Failure mechanisms during isothermal fatigue of SiC/Ti-24Al-11Nb composites. [Washington, D.C: National Aeronautics and Space Administration, 1995.

Johnson, W. S. Fatigue damage growth mechanisms in continuous fiber reinforced titanium matrix composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

Johnson, W. S. Fatigue damage growth mechanisms in continuous fiber reinforced titanium matrix composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

United States. National Aeronautics and Space Administration., a cura di. Thermomechanical fatigue damage/failure mechanisms in SCS-6/timetal 21S [0/90]s composite. [Washington, DC]: National Aeronautics and Space Administration, 1994.

H, Froes F., Storer J e Materials Week '94 (1994 : Rosemont, Ill.)., a cura di. Recent advances in titanium metal matrix composites: Proceedings of a symposium held during Materials Week, October 2-6, 1994, in Rosemont, Illinois. Warrendale, Pa: TMS, 1995.

S, Johnson W., e Langley Research Center, a cura di. Matrix fatigue crack development in a notched continuous fiber SCS-6/Ti-15-3 composite. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

W, Lee Eui, Minerals, Metals and Materials Society. Meeting e Minerals, Metals and Materials Society. Non-ferrous Metals Committee., a cura di. Light weight alloys for aerospace applications IV: Proceedings of the fourth "Light Weight Alloys for Aerospace Applications" Symposium : held February 10-13, 1997, during the 1997 TMS Annual Meeting in Orlando, Florida. Warrendale, Pa: Minerals, Metals & Materials Society, 1997.

Kevin, Rivers H., Smith Russell W e Langley Research Center, a cura di. Thermal output of WK-type strain gauges on various materials at cryogenic and elevated temperatures. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.

Kevin, Rivers H., Smith Russell W e Langley Research Center, a cura di. Thermal output of WK-type strain gauges on various materials at cryogenic and elevated temperatures. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.

Victor, Lukaszewicz, DellaCorte Christopher e United States. National Aeronautics and Space Administration., a cura di. The tribology of PS212 coatings and PM212 composites for the lubrication of titanium 6Al-4V components of a Stirling engine space power system. [Washington, DC]: National Aeronautics and Space Administration, 1994.

Nielsen, Lauge Fuglsang. Composite Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/978-3-540-27680-7.

Chawla, Krishan K. Composite Materials. New York, NY: Springer New York, 1998. http://dx.doi.org/10.1007/978-1-4757-2966-5.

Berthelot, Jean-Marie. Composite Materials. New York, NY: Springer New York, 1999. http://dx.doi.org/10.1007/978-1-4612-0527-2.

Kar, Kamal K., a cura di. Composite Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-662-49514-8.

Chawla, Krishan K. Composite Materials. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-28983-6.

Chawla, Krishan Kumar. Composite Materials. New York, NY: Springer New York, 1987. http://dx.doi.org/10.1007/978-1-4757-3912-1.

Chung, Deborah D. L. Composite Materials. London: Springer London, 2003. http://dx.doi.org/10.1007/978-1-4471-3732-0.

Nicolais, Luigi, Michele Meo e Eva Milella, a cura di. Composite Materials. London: Springer London, 2011. http://dx.doi.org/10.1007/978-0-85729-166-0.

Chung, Deborah D. L. Composite Materials. London: Springer London, 2010. http://dx.doi.org/10.1007/978-1-84882-831-5.

Chawla, Krishan K. Composite Materials. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-0-387-74365-3.

Schwartz, M. M. Composite materials. Upper Saddle River, N.J: Prentice Hall PTR, 1997.

Havas, George D. Composite materials. Washington, D.C: Science Reference Section, Science and Technology Division, Library of Congress, 1986.

Schwartz, Mel M. Composite materials. Upper Saddle River, N.J: Prentice Hall PTR, 1997.

Blake, Jill. Composite materials. Cambridge: Hobsons, 1989.

Velmurugan, R., Dong Ruan e S. Gurusideswar. Composite Materials. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003352358.

Wisner, Brian, Simona E. Hunyadi Murph, Ioannis N. Mastorakos e Muralidharan Paramsothy, a cura di. Composite Materials. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-50180-7.

Advisory Group for Aerospace Research and Development. Structures and Materials Panel. Meeting,, a cura di. Characterisation of fiber reinforced titanium matrix composites: Papers presented at the 77th Meeting of the AGARD Structures and Materials Panel, held in Bordeaux, France, 27th-28th September 1993. Neuilly sur Seine: Agard, 1994.

S, Majumdar Bhaskar, e United States. National Aeronautics and Space Administration., a cura di. In-phase thermomechanical fatigue mechanisms in an unidirectional SCS-6/Ti 15-3 MMC. [Washington, DC]: National Aeronautics and Space Administration, 1995.

S, Majumdar Bhaskar, e United States. National Aeronautics and Space Administration., a cura di. In-phase thermomechanical fatigue mechanisms in an unidirectional SCS-6/Ti 15-3 MMC. [Washington, DC]: National Aeronautics and Space Administration, 1995.

S, Majumdar Bhaskar, e United States. National Aeronautics and Space Administration., a cura di. In-phase thermomechanical fatigue mechanisms in an unidirectional SCS-6/Ti 15-3 MMC. [Washington, DC]: National Aeronautics and Space Administration, 1995.

Koohgilani, Mehran. Advanced composite materials: Composite material's history. Poole: Bournemouth University, 2001.

Koohgilani, Mehran. Advanced composite materials: Composite repair systems. Poole: Bournemouth University, 2001.

Brigante, Domenico. New Composite Materials. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-01637-5.

Kalia, Susheel, a cura di. Lignocellulosic Composite Materials. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-68696-7.

Pilato, Louis A., e Michael J. Michno. Advanced Composite Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-662-35356-1.

Tiwari, Ashutosh, Mohammad Rabia Alenezi e Seong Chan Jun, a cura di. Advanced Composite Materials. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119242666.

National, Seminar on "Composite Materials Manufacturing Processing Evaluation Application and Technologies" (1998 National Metallurgical Laboratory). Proceedings, composite materials. Jamshedpur: National Metallurgical Laboratory [&] Materials Research Society of India, 1998.

A, Kelly, e Zweben Carl H, a cura di. Comprehensive composite materials. Amsterdam: Elsevier, 2000.

Institute of Materials (London, England), a cura di. Engineering composite materials. 2^a ed. London: IOM, 1999.

Williams, James C., e Gerd Lütjering. Titanium (Engineering Materials and Processes). Springer, 2003.

Lütjering, Gerd, e Williams James C. Titanium. Springer London, Limited, 2007.