Bibliografie tematiche / Titanium and composite materials

Indice

  1. Articoli di riviste
  2. Tesi
  3. Libri
  4. Capitoli di libri
  5. Atti di convegni
  6. Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Titanium and composite materials"

Autore: Grafiati
Pubblicato: 11 gennaio 2025

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Titanium and composite materials".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Titanium and composite materials"

1

Pribytkov, Gennady A., Anton V. Baranovskiy, Victoria V. Korzhova, Irina A. Firsina, Kirill O. Akimov e Vladimir P. Krivopalov. "Study of synthesis products in mechanically activated mixtures of copper titanides with carbon". Himičeskaâ fizika i mezoskopiâ 26, n. 1 (2024): 103–11. http://dx.doi.org/10.62669/17270227.2024.1.10.

Testo completo
Abstract (sommario):
Metal matrix composites reinforced with dispersed carbide particles have an optimal combination of strength and wear resistance. The composites are used as structural materials, wear-resistant materials and coatings as well as functional materials. Copper matrix composites for electrical purposes are strengthened with particles of refractory compounds (carbides, borides, silicides). They are used to manufacture breaking electrical contacts which have increased resistance to erosion under the electric arc exposure. The highest arc erosion resistance is achieved by composites with a structure, in which submicron particles of refractory compounds are homogeneously distributed in the copper matrix. Powder technologies are used to obtain the copper matrix composites. A large number of publications concerns with the production of copper matrix composites strengthened by dispersed particles of titanium diboride. The composite powder was obtained by self-propagating high- temperature synthesis (SHS) occurring through mechanically activated mixtures of titanium, copper and carbon. The synthesis products were compacted by spark plasma sintering (SPS). In the present work, the microstructure, elemental and phase composition of the products of the synthesis reaction occurring through mechanically activated reactant powder mixtures of copper titanides with carbon (soot) subjected to additional heat treatment were studied using the methods of X-ray diffraction, optical and scanning electron microscopy. Copper matrix composites strengthened by carbide particles were obtained by copper reduction from intermetallic compounds (copper titanides) via reaction: TimCun+ C → TiC + Cu. The use of the copper titanides instead of titanium and copper powders eliminates the blocking of surface titanium-carbon reaction by copper during the mechanical activation of titanium-copper-carbon powder mixtures. This ensures a more complete conversion of titanium carbide in the synthesis reaction. It is established that the dispersion of the carbide phase in the structure of the synthesized ‘titanium carbide-copper binder’ composite depends on the elemental ratio of titanium and copper in the reaction mixtures. With an equiatomic content of titanium and copper the synthesis results in a matrix-type composite, in the structure of which submicron (less than 300 nm) carbide inclusions are homogeneously distributed throughout the copper binder. Unreacted copper and titanium in the titanide powders do not prevent the attainment of target phase composition of the synthesis products that include only titanium carbide and copper.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Gemelli, Enori, Patrícia Borges da Silva Maia, Fabio Nery, Nelson Heriberto Almeida Camargo, Vinícius André Rodrigues Henriques, Jailson de Jesus e Priscila Ferraz Franczak. "Effect of Calcium Titanate and/or Titanium-Phosphides in the Properties of Titanium Composites for Implant Materials". Advanced Materials Research 906 (aprile 2014): 226–31. http://dx.doi.org/10.4028/www.scientific.net/amr.906.226.

Testo completo
Abstract (sommario):
Titanium-based composites containing TixPy phase (s) or CaTiO3 and TixPy phase (s) were produced by a non conventional method using suitable mixtures of TiH2 powder and phosphoric acid (TiH2/P), or TiH2 and 10 vol.% of calcium phosphate (TiH2/CP), respectively. The composites were produced with the same phosphor molar concentration. The mixtures were prepared by ultrasound in water, dried in a rotary evaporator, pressed at 600 MPa and vacuum-sintered at 1200 °C for 2 hours. The mixtures were well dispersed by ultrasound and agglomerate-free. The analyses show that titanium particles were coated with TixPy phase (s) for the TiH2/P composite or with an intermediary layer of TixPy phase (s) and an external deposit of calcium titanate for the TiH2/CP composite. The TiH2/P composite presented higher compressive strength and about the same contact angle compared to the TiH2/CP composite. However, both materials displayed lower contact angle than that of pure titanium.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Wu, Yali, Wenjie Hao, Tian Tian, Jinhe Yang e Yueping Cao. "Preparation of Graphene Doped Titanium Dioxide Compo -site and Study on Treatment of Laboratory Wastewater". International Journal of Materials Science and Technology Studies 1, n. 2 (30 maggio 2024): 1–11. http://dx.doi.org/10.62051/ijmsts.v1n2.01.

Testo completo
Abstract (sommario):
In this paper, five kinds of composite materials were prepared by using graphene oxide (or graphene) doped with TiO2. The photocatalytic properties of five kinds of composite materials, pure graphene oxide and pure TiO2 for methyl orange, phenol solution and rhodamine B simulated laboratory wastewater were studied respectively. The experimental results show that the photocatalytic performance of graphene oxide-doped titanium dioxide composites is better than that of graphene oxide-doped titanium dioxide composites. When graphene oxide is doped with titanium dioxide as catalyst, the higher the purity of graphene oxide, the better the photocatalytic effect of the composite material. Doped titanium dioxide is better than undoped titanium dioxide. When the amount of doped titanium dioxide is 0.3g, the photocatalytic effect is the best. Based on the comprehensive data, it can be clearly found that graphene oxide doped TiO2 composite is more suitable for degrading rhodamine system. By simulating the treatment of laboratory wastewater, it lays a theoretical foundation for the treatment of laboratory wastewater in the future.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Kashytskyi, V. P., O. L. Sadova, M. D. Melnychuk, G. I. Golodyuk e O. B. Klymovets. "Structuring of Modified Epoxy Composite Materials by Infrared Spectroscopy". Journal of Engineering Sciences 10, n. 1 (2023): C9—C16. http://dx.doi.org/10.21272/jes.2023.10(1).c2.

Testo completo
Abstract (sommario):
A comparative evaluation of the structuring processes of the epoxy polymer system with epoxy polymers modified with polyvinyl chloride solution and epoxy composites filled with finely dispersed titanium oxide powder was carried out. Analysis of the infrared (IR) absorption spectra of the studied epoxy polymer and epoxy composite materials showed the presence of deformation and valence vibrations of certain groups of atoms. The oscillations of groups of atoms with double bonds and regions of existence of triple bonds were also revealed. In the region of high frequencies, absorption bands correspond to valence vibrations of groups containing a hydrogen atom. The presence of triple bonds in the epoxy polymer system was determined, indicating unreacted functional groups. This fact corresponds to the low content of the gel fraction of unmodified epoxy polymers after heat treatment and indicates the formation of a system with insufficient chemical bonds. The absorption bands of the epoxy composite material filled with titanium oxide powder are characterized by a lower optical density and a larger peak area compared to the bands of the unmodified epoxy polymer, which indicates the formation of a higher number of crosslinking nodes of the epoxy composite material. The introduction of polyvinyl chloride into the composition of the epoxy polymer system increases the degree of structuring of epoxy polymers. However, a smaller number of formed chemical bonds of the modified epoxy polymer was recorded compared to epoxy composites containing titanium oxide particles. The highest degree of structuring is provided in polyvinyl chloride-modified epoxy composites containing titanium oxide powder due to intensive structuring and formation of double and triple bonds.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Khabas, Tamara, Ekaterina Kulinich, Victor Merkulov, Сhristoph Roesli e Mihail Martusevich. "Development of Radioactive Sources on the Basis of Bioinert Ceramic Materials for Medical Applications and their Pre-Clinical Testing". Advanced Materials Research 1040 (settembre 2014): 286–91. http://dx.doi.org/10.4028/www.scientific.net/amr.1040.286.

Testo completo
Abstract (sommario):
In this article, both the composition and composite properties of radioactive sources for medical applications are worked out and studied. The bases of these sources are bioinert ceramic solids and radionuclides. The active source is constituted from dispersed radioactive yttriа oxide or strontium oxide monolithically encapsulated with bioinert glass flux. The thermal expansion properties of the analyzed composites are highly similar to the ones of both titanium metal and titanum alloys. Therefore, the developed radioactive sources can be mounted on titanium holder. Importantly, all utilized elements and alloys are already applied in medicine. In this article we demonstrate the use of a radioactive β-source placed on a titanium holder. The device is finally applied in a oncological model disease treatment.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Kim, D., e M. Ramulu. "Study on the Drilling of Titanium/Graphite Hybrid Composites". Journal of Engineering Materials and Technology 129, n. 3 (30 marzo 2007): 390–96. http://dx.doi.org/10.1115/1.2744397.

Testo completo
Abstract (sommario):
Titanium/graphite hybrid composites (TiGr) are a potentially enabling technology which satisfies the low structural weight fraction and long operational lifetime required for the high-speed civil transport. TiGr composites are made of thermoplastic polymer matrix composite plies with titanium foils as the outer plies. The two materials are assembled by bonding the polymer matrix composite plies and titanium foils to form a hybrid composite laminate. Both experimental and analytical work has been performed to characterize major hole quality parameters and cutting mechanisms encountered in drilling of TiGr composites. The effects of consolidation processing, such as induction heating press and autoclave processes, on drilling characteristics of TiGr composites were examined. The hole quality parameters and hole exit damage was investigated and discussed.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Wang, L. I., X. F. Wang, C. L. Yu e Y. Q. Zhao. "Effect of titanium addition on thermal stability of hydroxyapatite/zirconia nanocomposite". Science of Sintering 47, n. 1 (2015): 107–12. http://dx.doi.org/10.2298/sos1501115w.

Testo completo
Abstract (sommario):
HA/ZrO2 composite nanpowder with various addition of titanium (0.2-2.4wt%) were synthesized via wet chemical method using ZrOCl2.8H2O, H3PO4, Ca(OH)2 and tetraethylorthotitanate as precursor materials. The composites were then sintered at 900-1200?C for 2h, respectively. Effect of titanium addition to the composite on the phase composition and thermal stability during thermal treatment was investigated. The results suggested that as the sintering temperature increased from 900?C to 1200?C and with the addition of titanium to the composite below 0.8wt%, main phases were HA and ZrO2. As the sintering temperature increased to 1200?C and with the addition of titanium to the composite above 0.8wt%, main phases were HA, ZrO2 and a small amount of dicalcium phosphate (DCP). There were still no tricalcium phosphate (?-TCP) and CaZrO3 phases observed, which indicated that the addition of titanium restrained decomposition of HA and thermal reaction between HA and ZrO2. It also suggested that the addition of 0.8wt% titanium to the composite was optimum for producing HA/ZrO2 composite nanopowder with expected main phases. With the addition of 0.8wt% titanium to the composite, SEM images showed that the individual particles of the two materials were still visible, which also implied that the reaction between HA and ZrO2 did not occur.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Voznesenskaya, Anna A., Andrei Kireev e Alena Ivashchenko. "Synthesis of Ultra-Dispersed Spherical Composite Materials". Solid State Phenomena 299 (gennaio 2020): 205–9. http://dx.doi.org/10.4028/www.scientific.net/ssp.299.205.

Testo completo
Abstract (sommario):
This paper describes a method of laser synthesis of titanium microspheres, titanium carbide and silicon oxide. The formation of microspheres is carried out under the action of femtosecond laser radiation on the surface of the sample. The analysis was carried out on a scanning electron microscope. The obtained titanium and titanium carbide microspheres have an average size of the main fraction of 1-3 μm and can be used in applications of additive technologies and powder metallurgy as the main raw material or as an alloying additive. The main fraction of silicon oxide granules lies in the range of 50-300 nm. To improve the efficiency of the particle output, a combined method of laser action and electric current is proposed.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Kusova, T. V., I. A. Yamanovskaya, N. S. Kopeikina, A. S. Kraev e A. V. Agafonov. "Obtaining mesoporous materials based on titanium dioxide modified by magnetite with high adsorption capacity and photocatalytic activity". Perspektivnye Materialy 12 (2020): 64–72. http://dx.doi.org/10.30791/1028-978x-2020-12-64-72.

Testo completo
Abstract (sommario):
Crystalline composite structures based on titanium dioxide modified by magnetite particles with improved sorption and photocatalytic properties were obtained by a microwave-assisted method. This method is based on a polyol method synthesis of titanium glycolate using microwave heating and followed by the water treatment under microwave heating at 2.45 GHz, without using the calcination stage at high temperatures. It was found that the treatment of titanium glycolates in water under the influence of microwave heating leads to the formation of the crystal structure of titanium dioxide (polymorphic anatase modification). Using scanning electron microscopy, it was shown that during the synthesis of composite structures based on titanium dioxide, the formation of particles of a spherical and rod-shaped form. The resulting materials were characterized by electron microscopy, X-ray phase analysis, dynamic light scattering, and low-temperature nitrogen adsorption/desorption. The analysis of the influence of structural and morphological features on the adsorption capacity and photocatalytic activity of the composites is carried out. A comparative analysis of the photocatalytic activity of the obtained composites in the decomposition of the Rhodamine B dye under UV radiation showed that the most effective dye removal (~ 99 %) were observed in the presence of both spherical and rod-shaped composite structures as catalysts containing 1 % of magnetite.
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Zhang, Zai-Yu, Yi-Long Liang, Hong-Chuan Cao e Yong Zhu. "The Preparation and Mechanical Properties of a Pure Titanium-Based Matrix Composite Reinforced with Graphene Nanoplatelets". Science of Advanced Materials 12, n. 2 (1 febbraio 2020): 296–303. http://dx.doi.org/10.1166/sam.2020.3531.

Testo completo
Abstract (sommario):
A lightweight titanium matrix composite material was fabricated by vacuum sintering using semi-powder metallurgy. The graphene nanoplatelets (GNPs) were used as a reinforcement for the titanium matrix composites. Fabricating the composite materials used three steps: dispersion, formation, and sintering. In particular, GNPs were dispersed by ionic liquid through a centrifugal testing machine instead of ball milling in the process. The better pressure for composite forming was 600 MPa. At the same time, the better sintering temperature and holding time were 1200 °C and 3 h. The influences of the GNP addition on the density, microstructure, and microhardness of the Ti/GNP composites were investigated. For the mechanical properties of the composites, we focused on the tensile strength with different GNP contents. The Ti 0.075 wt% and Ti 0.15 wt% GNP composites exhibited yield strengths of 850 and 948 MPa, which demonstrated 66% and 85% increase compared to those of extruded titanium materials with no GNP additive (512 MPa yield strength). The main strengthening mechanisms of Ti/GNP composites are grain refinement strengthening, thermal mismatch strengthening, and dispersion strengthening.
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "Titanium and composite materials"

1

Cobb, Ted Quincy Jr. "Optimization of hybrid titanium composite laminates". Thesis, Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/19965.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Stepina, Nataliia. "Biocompatible carbon nanotube/β-titanium alloy composite materials". Thesis, University of Oxford, 2015. https://ora.ox.ac.uk/objects/uuid:09d4a408-9624-45c2-a8a9-0f14fd2b2251.

Testo completo
Abstract (sommario):
The thesis describes a study of the modifications of orthopaedic Ti-based substrates using nanomaterials, and the evaluation of their biocompatibility for further use as implant material, with the aim to develop new, biocompatible β-Ti/CNT composite materials. Traditionally, CNTs require the presence of a transition metal catalyst such as Fe, Ni, Co, for successful growth. Different aspects of a catalyst-assisted CVD MWCNTs growth on various Ti-based substrates including bulk, thin films and 3D porous scaffolds, have been investigated. Low concentrations of catalyst were deposited using spin coating on titanium substrates of various forms and shapes. A strong influence of the surface topography was observed. In contrast, no effect of the elemental composition of the substrate could be detected. To evaluate the biocompatibility of the newly created materials, cell culture studies using fetal human osteoblasts (fHobs) were performed. It was shown that β-Ti/MWCNTs samples possess good initial osteoblast attachment, but no long-term osteoblast activity. Hence the biocompatibility of isolated (i.e. without a Ti substrate) MWCNTs was studied, using MWCNT carpets and various types of MWCNTs buckypapers. All the samples revealed very low cell activity. While β-Ti/MWCNTs samples did not exhibit good biocompatibility, alternative β-Ti/TiC samples were synthesized with a simple CVD method and revealed good osteoblast response with increased mineralization. Moreover, good corrosion resistance and mechanical properties of β-Ti/TiC samples have been reported. Finally, successful method for non-catalytic CVD MWCNTs growth on Ti substrates was developed for the first time, thereby excluding potentially toxic catalysts from the implant material. CVD was performed with acetylene precursor on bulk titanium substrates etched with Piranha solution, which generated an appropriate surface to foster MWCNTs growth. A combination of the change in the surface roughness, improved hydrophilicity, and elemental composition of the surface as a result of the Piranha etching is likely to be responsible for the successful formation of MWCNTs.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Li, Wenyu. "The fabrication of silicon nitride-titanium nitride composite materials". Thesis, University of Leeds, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.305875.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Li, Edward. "Characterization of mechanical and fatigue properties for a hybrid titanium composite laminate". Thesis, Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/19897.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Osborne, Deborah J. "Experimental and computational study of interphase properties and mechanics in titanium metal matrix composites at elevated temperatures /". View online ; access limited to URI, 2007. http://0-digitalcommons.uri.edu.helin.uri.edu/dissertations/AAI3277003.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Rhymer, Donald William. "Fatigue damage mechanisms of advanced hybrid titanium composite laminates". Thesis, Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/18980.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Montoya, Anthony Tristan. "Synthesis of carbon nitrides and composite photocatalyst materials". Diss., University of Iowa, 2018. https://ir.uiowa.edu/etd/6479.

Testo completo
Abstract (sommario):
This thesis describes the synthesis, characterization and photocatalytic applications of carbon nitride (C3N4) and titanium dioxide (TiO2) materials. C3N4 was prepared from the thermal decomposition of a trichloromelamine (TCM) precursor. Several different reactor designs and decomposition temperatures were used to produce chemically and thermally stable orange powders. These methods included a low temperature glass Schlenk reactor, a high mass scale stainless steel reactor, and decomposition at higher temperatures by the immersion of a Schlenk tube into a furnace. These products share many of the same structural and chemical properties when produced by these different methods compared to products from more common alternate precursors in the literature, determined by infrared spectroscopy (IR), nuclear magnetic resonance spectroscopy (NMR), powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and elemental analysis. C3N4 is capable of utilizing light for photocatalysis due to its moderate band gap (Eg), measured to be between 2.2 and 2.5 eV. This enables C3N4 to be used in the photocatalytic degradation of organic dyes and the production of hydrogen via the water-splitting reaction. C3N4 degraded methylene blue dye to less than 10% of its initial concentration in less than an hour of UV light illumination and 60% under filtered visible light in 150 minutes. It also degraded methyl orange dye to below 20% in 70 minutes under UV light and below 60% in 150 minutes under visible light. Using precious metal co-catalysts (Pt, Pd, and Ag) photo-reduced onto the surface of C3N4, hydrogen was produced from a 10% aqueous solution of triethanolamine at rates as high as 260 μmol h-1 g-1. C3N4 was also modified by mixing the precursor with different salts (NaCl, KBr, KI, KSCN, and NH4SCN) as hard templates. Many of these salts reacted with TCM by exchanging the anion with the chlorine in TCM. The products were mostly prepared using the high temperature Schlenk tube reactor, and resulted in yellow, orange, or tan-brown products with Eg values between 2.2 and 2.7 eV. Each of these products had subtle differences in the IR spectra and elemental composition. The morphology of these C3N4 products appeared to be more porous than unmodified C3N4, and the surface area for some increased by a factor of 4. These products demonstrated increased activity for photocatalytic hydrogen evolution, with the product from TCM-KI reaching a peak rate as high as 1,300 µmol h-1 g-1. C3N4 was coated onto metal oxide supports (SiO2, Al2O3, TiO2, and WO3) with the goal of utilizing enhanced surface area of the support or synergy between two different semiconductors. These products typically required higher temperature synthesis conditions in order to fully form. The compositions of the SiO2 and Al2O3 products were richer in nitrogen and hydrogen compared to unmodified C3N4. The higher temperature reactions with C3N4 and WO3 resulted in the formation of the HxWO3 phase, and an alternate approach of coating WO3 on C3N4 was used. The degradation of methyl orange showed a significant increase in adsorption of dye for the composites with SiO2 and Al2O3, which was not seen with any of the individual components. The composite between C3N4 and TiO2 showed improved activity for hydrogen evolution compared to unmodified C3N4. The surface of TiO2 was modified by the reductive photodeposition of several first row transition metals (Mn, Fe, Co, Ni, and Cu). This process resulted in the slight color change of the white powder to shades of light yellow, blue or grey. Bulk elemental analysis showed that these products contained between 0.04-0.6 at% of the added metal, which was lower than the targeted deposit amount. The Cu modified TiO2 had the largest enhancement of photocatalytic hydrogen evolution activity with a rate of 8,500 µmol h-1 g-1, a factor of 17 higher than unmodified TiO2.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Calcaterra, Jeffrey Ronald. "Life prediction evaluation and damage mechanism identification for SCS-6/Timetal 21S composites subjected to thermomechanical fatigue". Diss., Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/12548.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Ho, Beatrice Jane, e 何沛枝. "Effects of sandblasting on resin composite bonding to zirconia and titanium". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2013. http://hdl.handle.net/10722/194577.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Castro, Gabriel. "Drilling carbon fiber reinforced plastic and titanium stacks". Pullman, Wash. : Washington State University, 2010. http://www.dissertations.wsu.edu/Thesis/Spring2010/g_castro_042210.pdf.

Testo completo
Abstract (sommario):
Thesis (M.S. in mechanical engineering)--Washington State University, May 2010.
Title from PDF title page (viewed on July 16, 2010). "School of Engineering and Computer Science." Includes bibliographical references (p. 109-112).
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Libri sul tema "Titanium and composite materials"

1

Naik, Rajiv A. Observations of fatigue crack initiation and damage growth in notched titanium matrix composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Ant︠s︡iferov, V. N. Kompozit︠s︡ionnye materialy i konstrukt︠s︡ii na osnove titana i ego soedineniĭ: Monografii︠a︡. Novosibirsk: In-t gidrodinamiki im. M.A. Lavrentʹeva SO RAN, 2001.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

1935-, Wightman James P., e Langley Research Center. Materials Division., a cura di. Fracture surface analysis in composite and titanium bonding: Semi-annual report. Blacksburg, VA: Chemistry Dept., Virginia Polytechnic Institute & State University, 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Davim, J. Paulo, R. Zitoune e V. Krishnaraj. Machining of titanium alloys and composites for aerospace applications: Special topic volume with invited peer reviewed papers only. Durnten-Zurich: Trans Tech Publications, 2013.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Ltjering, G. Titanium. Berlin: Springer, 2003.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

H, Froes F., Suryanarayana C, Ward-Close C. M, ASM International. Materials Synthesis and Processing Committee., Minerals, Metals and Materials Society. Materials Design and Manufacturing Division. e Minerals, Metals and Materials Society. Fall Meeting, a cura di. Synthesis/processing of lightweight metallic materials: Proceedings of a symposium held during the TMS annual meeting in Las Vegas, Nevada, February 13-16, 1995. Warrendale, Pa: The Society, 1995.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

S, Johnson W., e Langley Research Center, a cura di. Modeling fatigue crack growth in cross ply titanium matrix composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1993.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

O, Soboyejo W., Srivatsan T. S, Davidson D. L e Minerals, Metals and Materials Society. Structural Materials Division., a cura di. Fatigue and fracture of ordered intermetallic materials I: Proceedings of a symposium sponsored by the Structural Materials Division (SMD) of the Minerals, Metals & Materials Society (TMS), held during Materials Week '93 in Pittsburgh, PA, October 17-21, 1993 hosted by the Materials, Metals & Materials Society (TMS), and the Materials Information Society (ASM International). Warrendale, Pa: Minerals, Metals & Materials Society, 1994.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

United States. National Aeronautics and Space Administration., a cura di. Isothermal fatigue behavior of a [90] Sic/Ti-15-3 composite at 426 C. [Washington, D.C.]: NASA, 1991.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

A, Bartolotta P., e United States. National Aeronautics and Space Administration., a cura di. Failure mechanisms during isothermal fatigue of SiC/Ti-24Al-11Nb composites. [Washington, D.C: National Aeronautics and Space Administration, 1995.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Capitoli di libri sul tema "Titanium and composite materials"

1

Sharma, Ankush P., e R. Velmurugan. "High-Velocity Impact Response of Titanium/Composite Laminates". In Composite Materials, 238–47. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003352358-23.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Xie, Yi Bing, Li Min Zhou e Hai Tao Huang. "Biosensor Application of Enzyme-Functionalized Titania/Titanium Composite". In Advances in Composite Materials and Structures, 645–48. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.645.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Wang, Hong Hua, Chen Rong e Di Zhang. "The Mechanical Properties of a New Titanium Alloys with Low Modulus". In Composite Materials V, 243–47. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-451-0.243.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Wang, K., Zheng Yi Fu, Wei Min Wang, Y. C. Wang, H. Wang, Jin Yong Zhang e Qing Jie Zhang. "Study on the Thermodynamics and Kinetics in the Combustion Reaction between Titanium and Boron Powders". In Composite Materials V, 189–94. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-451-0.189.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Kukh, A., I. Ivanenko e I. Asterlin. "Composite Titanium Dioxide Photocatalytically Active Materials: Review". In Springer Proceedings in Physics, 379–90. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-52268-1_28.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Yang, D. M., C. X. Huang, D. T. Huang e X. Zhao. "Interfacial Reactions between Coated Nicalon Fiber and Titanium". In Controlled Interphases in Composite Materials, 199–205. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-011-7816-7_20.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Mahamood, Rasheedat Modupe. "Laser Metal Deposition of Titanium Alloy and Titanium Alloy Composite: Case Studies". In Engineering Materials and Processes, 165–95. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-64985-6_8.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Ii, Seiichiro, Teruko Nishitani e Ryuichi Tomoshige. "Interfacial Microstructure of Titanium Nitride – Titanium Diboride Composite Synthesized by Hot Shock Compaction". In Materials Science Forum, 2481–84. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-462-6.2481.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Shankar, S., R. Nithyaprakash e G. Abbas. "Tribological Study on Titanium Based Composite Materials in Biomedical Applications". In Tribological Applications of Composite Materials, 215–41. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9635-3_8.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Bakarinova, Valentina I. "Interphase Interaction in Composite Materials Based on Titanium". In MICC 90, 445–53. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3676-1_75.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Titanium and composite materials"

1

Wielage, B., S. Steinhäuser, T. Schnick, U. Hofmann, A. Ilyuschenko e T. Azarova. "Thermal Spraying of Titanium Carbide Composite Materials". In ITSC 1999, a cura di E. Lugscheider e P. A. Kammer. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 1999. http://dx.doi.org/10.31399/asm.cp.itsc1999p0301.

Testo completo
Abstract (sommario):
Abstract Thermal spraying of composite materials is an effective method for surface protection against wear and corrosive attacks. There are different possibilities to produce composite-materials for thermal spray applications. The self-propagating-high- temperature-synthesis (SHS) is a very promising method to obtain fine carbide particles homogeneously distributed in a metal matrix. In the present investigation TiC-based composite materials were applied to steel substrate samples by thermal spraying. The coating characteristics were determined by the use of different investigation methods. The results of the wear test show the great potential for industrial application. Further progress is expected from the optimisation of the thermal spray processes and the compounds composition. Paper includes a German-language abstract.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Simion, Demetra, Carmen Gaidau, Jianzhong Ma e Zhang Wenbo. "New nanostructured composite obtained by innovative technologies". In The 8th International Conference on Advanced Materials and Systems. INCDTP - Leather and Footwear Research Institute (ICPI), Bucharest, Romania, 2020. http://dx.doi.org/10.24264/icams-2020.ii.22.

Testo completo
Abstract (sommario):
The paper is focused on obtaining a new nanostructured composite by innovative technologies based on: fibrillar cellulose/titanium dioxide/surfactants (bolaform- dodecandioyl-diglycine and surfactant classic-collagen hydrolysate)/ethanol/water, for improved surface properties. Innovation consists in technologies for obtaining new nanostructured composites, solubilisation/compatibilisation of their component substances for the conditioning of supports processed with the film created by evaporation of the emulsion nanocomposites. Fibrillar cellulose/titanium dioxide nanocomposites have been stabilized with bolaform surfactants in a 1:1 ratio of ethanol/water solvents in order to increase the uniformity of titanium dioxide shell nanocomposites. Nanostructured “cauliflower”-like composites developed as a result of biopolymer-surfactant interactions for fibrillar cellulose/titanium dioxide/bolaform couple in ethanol/water system are reported by SEM microscopy. The analysis by FTIR-ATR spectroscopy of bolaform, fibrillar cellulose and dynamic light scattering of 2 types of nanocomposites emulsions (with bolaform and classic surfactant emulsions) were reported. The new nanocomposites could provide the hybrid film with increased mechanical resistance to water and heat. Supports processing with the composite film improve wet/dry friction resistance, water resistance and tensile strength. Environmentally-friendly supports with smart multifunctional features are obtained for various applications.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Zhang, Jipeng, Yue Wang, Jiazhen Zhang e Zhengong Zhou. "Notched behavior of hybrid glass/aluminum/titanium fiber metal laminates". In 2ND INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS AND MATERIAL ENGINEERING (ICCMME 2017). Author(s), 2017. http://dx.doi.org/10.1063/1.4983588.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Berton, B., G. Surdon e C. Colin. "Intermetallic and titanium matrix composite materials for hypersonic applications". In International Aerospace Planes and Hypersonics Technologies. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1995. http://dx.doi.org/10.2514/6.1995-6132.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Chittibabu, G., Ch Sri Chaitanya, Babar Pasha Mahammod, Manoj Gupta, Syed Ismail e R. Narasimha Rao. "Tribological behaviour of titanium carbide reinforced aluminum composite materials". In INTERNATIONAL CONFERENCE ON SMART MATERIALS AND STRUCTURES, ICSMS-2022. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0146874.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Ahmed, Nihal, Nzubechukwu Okolie e Sujan Ghosh. "Novel Polyetheretherketone/Polytetrafluoroethylene Composites Reinforced With Titanium Silicon Carbide for Conveyor Chute". In ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/ssdm2024-121599.

Testo completo
Abstract (sommario):
Abstract The e-commerce industry has witnessed unprecedented growth in recent years, accelerated by the global pandemic and changing consumer behaviors. This demand has placed great strain on traditional conveyor chute materials, causing high friction and wear, leading to high maintenance costs and reduced operational efficiency. In this research, Polyetheretherketone (PEEK) + Polytetrafluoroethylene (PTFE) + MAX phases (Ti3SiC2) nanocomposite materials were tested for conveyor chute applications. The composite was fabricated by mixing the powder in a specific weight ratio, pressing them in a die, and finally sintering the pressed disc at 300°C. Tribological tests were performed in linear reciprocating motion using a Cr-Steel counterface. The nanocomposite materials show a COF of 0.06, lower than the PEEK and PTFE materials. More importantly, when tested under the same condition, the PTFE+PEEK+MAX phases composite showed a one-degree lower wear rate than the PEEK and PTFE materials. The microscope image shows that the physical presence of MAX phases helps the composites to attain better compaction, higher hardness, and better load-carrying capacity. The materials’ better compression and enhanced hardness help improve the composite’s tribological properties. Moreover, the better compaction of the PTFE+PEEK+MAX composite increases the water contact angle of these materials compared to the PTFE and PEEK materials. This novel composite can be an excellent replacement for the current materials used for conveyor chute applications.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Mall, Shankar, e Scott Cunningham. "Fatigue Response of Joint Between Titanium and Titanium Matrix Composite". In 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
14th AIAA/ASME/AHS Adaptive Structures Conference
7th. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2006. http://dx.doi.org/10.2514/6.2006-1673.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Malyutina, Yu N., K. A. Skorohod, K. E. Shevtsova e A. V. Chesnokova. "Multilayered titanium-steel composite produced by explosive welding". In ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4932832.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Feng, Zhongchao, Bingcun Zhang, Wanliang Hou, Lixin Chao, Yaqing Wang, Jun Feng e Yong Liang. "Laser-induced unitary/composite films of titanium ceramic-metal". In ICALEO® ‘95: Proceedings of the Laser Materials Processing Conference. Laser Institute of America, 1995. http://dx.doi.org/10.2351/1.5058936.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Kim, D., e M. Ramulu. "Study on the Drilling of Titanium/Graphite Hybrid Composites". In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-81132.

Testo completo
Abstract (sommario):
Titanium/graphite hybrid composites (TiGr) are a potentially enabling technology which satisfies the low structural weight fraction and long operational lifetime required for the High Speed Civil Transport. TiGr composites are made of thermoplastic polymer matrix composite (PMC) plies with titanium foils as the outer plies. The two materials are assembled by bonding the polymer matrix composite plies and titanium foils to form a hybrid composite laminate. Both experimental and analytical work has been performed to characterize major hole quality parameters and cutting mechanisms encountered in drilling of TiGr composites. The effects of consolidation processing, such as induction heating press and autoclave processe, on drilling characteristics of TiGr composites were examined. The hole quality parameters and hole exit damage was investigated and discussed.
Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Titanium and composite materials"

1

Long, Wendy, Zackery McClelland, Dylan Scott e C. Crane. State-of-practice on the mechanical properties of metals for armor-plating. Engineer Research and Development Center (U.S.), gennaio 2023. http://dx.doi.org/10.21079/11681/46382.

Testo completo
Abstract (sommario):
This report presents a review of quasi-static and dynamic properties of various iron, titanium, nickel, cobalt, and aluminum metals. The physical and mechanical properties of these materials are crucial for developing composite armoring systems vital for protecting critical bridges from terrorist attacks. When the wide range of properties these materials encompass is considered, it is possible to exploit the optimal properties of metal alloys though proper placement within the armoring system, governed by desired protective mechanism and environmental exposure conditions.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Pool, K. H., J. L. Brimhall, P. J. Raney e P. E. Hart. Evaluation of wear rates and mechanisms of titanium diboride-graphite composite materials proposed for use as cathodes in Hall-Heroult cells. Office of Scientific and Technical Information (OSTI), gennaio 1987. http://dx.doi.org/10.2172/6727518.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Lee, Max. Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, settembre 1996. http://dx.doi.org/10.21236/ada316048.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Abkowitz, Susan M. Lightweight Durable Titanium Tracks Using Low Cost Powder Metal Titanium Composite Technology. Fort Belvoir, VA: Defense Technical Information Center, luglio 2001. http://dx.doi.org/10.21236/ada395519.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Wadley, H. N. G., J. A. Simmons, R. B. Clough, F. Biancaniello, E. Drescher-Krasicka, M. Rosen, T. Hsieh e K. Hirschman. Composite materials interface characterization. Gaithersburg, MD: National Bureau of Standards, 1988. http://dx.doi.org/10.6028/nbs.ir.87-3630.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Lund, T. Microstructure-strength relationship of a deformation processed aluminum-titanium composite. Office of Scientific and Technical Information (OSTI), febbraio 1998. http://dx.doi.org/10.2172/658375.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Spangler, Lee. Composite Materials for Optical Limiting. Fort Belvoir, VA: Defense Technical Information Center, aprile 2001. http://dx.doi.org/10.21236/ada396124.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Magness, F. H. Joining of polymer composite materials. Office of Scientific and Technical Information (OSTI), novembre 1990. http://dx.doi.org/10.2172/6334940.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Anderson, D. P., e B. P. Rice. Intrinsically Survivable Structural Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, aprile 2000. http://dx.doi.org/10.21236/ada387309.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Anderson, David P., Chenggang Chen, Larry Cloos e Thao Gibson. Intrinsically Survivable Structural Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, febbraio 2001. http://dx.doi.org/10.21236/ada388001.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Ti possono interessare anche gli elenchi estesi di opere sul tema "Titanium and composite materials":
Articoli di riviste Tesi Libri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia