Articoli di riviste sul tema "Thermoplastic elastomer characterization"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Thermoplastic elastomer characterization".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.
Major, Zoltan, Matei C. Miron e Umut D. Cakmak. "Characterization of Thermoplastic Elastomers for Design Efforts". Advanced Materials Research 905 (aprile 2014): 161–66. http://dx.doi.org/10.4028/www.scientific.net/amr.905.161.
Bartolomé, L., A. Aginagalde, A. B. Martínez, M. A. Urchegui e W. Tato. "EXPERIMENTAL CHARACTERIZATION AND MODELLING OF LARGE-STRAIN VISCOELASTIC BEHAVIOR OF A THERMOPLASTIC POLYURETHANE ELASTOMER". Rubber Chemistry and Technology 86, n. 1 (1 marzo 2013): 146–64. http://dx.doi.org/10.5254/rct.13.87998.
Mars, W. V., e M. D. Ellul. "FATIGUE CHARACTERIZATION OF A THERMOPLASTIC ELASTOMER". Rubber Chemistry and Technology 90, n. 2 (1 giugno 2017): 367–80. http://dx.doi.org/10.5254/rct.17.83780.
Yang, Ying, Tsuneo Chiba, Hiromu Saito e Takashi Inoue. "Physical characterization of a polyolefinic thermoplastic elastomer". Polymer 39, n. 15 (luglio 1998): 3365–72. http://dx.doi.org/10.1016/s0032-3861(97)10119-7.
Allcorn, Eric K., Maurizio Natali e Joseph H. Koo. "Ablation performance and characterization of thermoplastic polyurethane elastomer nanocomposites". Composites Part A: Applied Science and Manufacturing 45 (febbraio 2013): 109–18. http://dx.doi.org/10.1016/j.compositesa.2012.08.017.
Verma, Gaurav, Bhawna Kulshreshtha, Sandeep Tyagi e Anup K. Ghosh. "PBT/Thermoplastic Elastomer Blends—Mechanical, Morphological, and Rheological Characterization". Polymer-Plastics Technology and Engineering 47, n. 10 (29 settembre 2008): 969–77. http://dx.doi.org/10.1080/03602550802274662.
Pramanik, M., S. K. Srivastava, B. K. Samantaray e A. K. Bhowmick. "Synthesis and characterization of organosoluble, thermoplastic elastomer/clay nanocomposites". Journal of Polymer Science Part B: Polymer Physics 40, n. 18 (8 agosto 2002): 2065–72. http://dx.doi.org/10.1002/polb.10266.
Major, Zoltan, Mikel Isasi e Thomas Schwarz. "Characterization of the Fracture and Fatigue Behavior of Thermoplastic Elastomer Materials". Key Engineering Materials 417-418 (ottobre 2009): 789–92. http://dx.doi.org/10.4028/www.scientific.net/kem.417-418.789.
Adrover-Monserrat, Bàrbara, Silvia García-Vilana, David Sánchez-Molina, Jordi Llumà, Ramón Jerez-Mesa e J. Antonio Travieso-Rodriguez. "Viscoelastic Characterization of a Thermoplastic Elastomer Processed through Material Extrusion". Polymers 14, n. 14 (18 luglio 2022): 2914. http://dx.doi.org/10.3390/polym14142914.
Wang, Wenshou, Peng Ping, Haijun Yu, Xuesi Chen e Xiabin Jing. "Synthesis and characterization of a novel biodegradable, thermoplastic polyurethane elastomer". Journal of Polymer Science Part A: Polymer Chemistry 44, n. 19 (2006): 5505–12. http://dx.doi.org/10.1002/pola.21643.
Han, Juan-Juan, e Han-Xiong Huang. "Preparation and characterization of biodegradable polylactide/thermoplastic polyurethane elastomer blends". Journal of Applied Polymer Science 120, n. 6 (11 febbraio 2011): 3217–23. http://dx.doi.org/10.1002/app.33338.
Kıroğlu, Ceren, e Nilgün Kızılcan. "Production and characterization of thermoplastic elastomer foams based on the styrene–ethylene–butylene–styrene (SEBS) rubber and thermoplastic material". Open Chemistry 19, n. 1 (1 gennaio 2021): 929–37. http://dx.doi.org/10.1515/chem-2021-0084.
Kylmä, Janne, e Jukka V. Seppälä. "Synthesis and Characterization of a Biodegradable Thermoplastic Poly(ester−urethane) Elastomer". Macromolecules 30, n. 10 (maggio 1997): 2876–82. http://dx.doi.org/10.1021/ma961569g.
Zhong, Qian, Jie Ren e Qinfeng Wang. "Preparation and characterization of polylactide-block -poly(butylene adipate) polyurethane thermoplastic elastomer". Polymer Engineering & Science 51, n. 5 (24 gennaio 2011): 908–16. http://dx.doi.org/10.1002/pen.21911.
Chi, Xiaohong, Lu Cheng, Wenfeng Liu, Xiaohong Zhang e Shengtao Li. "Characterization of Polypropylene Modified by Blending Elastomer and Nano-Silica". Materials 11, n. 8 (30 luglio 2018): 1321. http://dx.doi.org/10.3390/ma11081321.
Zahhaf, Omar, Giulia D’Ambrogio, Angela Giunta, Minh-Quyen Le, Guilhem Rival, Pierre-Jean Cottinet e Jean-Fabien Capsal. "Molten-State Dielectrophoretic Alignment of EVA/BaTiO3 Thermoplastic Composites: Enhancement of Piezo-Smart Sensor for Medical Application". International Journal of Molecular Sciences 23, n. 24 (12 dicembre 2022): 15745. http://dx.doi.org/10.3390/ijms232415745.
Lee, Ji Hun, e Hyung Joong Kim. "Synthesis and Characterization of Thermoplastic Elastomer Poly(ether-b-amide) Containing Aromatic Moiety". Polymer Korea 38, n. 5 (25 settembre 2014): 596–601. http://dx.doi.org/10.7317/pk.2014.38.5.596.
Asami, Takuo, e Koh-hei Nitta. "Morphology and mechanical properties of polyolefinic thermoplastic elastomer I. Characterization of deformation process". Polymer 45, n. 15 (luglio 2004): 5301–6. http://dx.doi.org/10.1016/j.polymer.2004.05.017.
Juárez, D., S. Ferrándiz, R. Balart, M. J. Reig e M. A. Peydró. "Rheological Characterization and Mathematical Modeling of a SEBS Blend for Industrial Applications where Nowadays Liquid Silicone Rubber is Used". Key Engineering Materials 502 (febbraio 2012): 109–14. http://dx.doi.org/10.4028/www.scientific.net/kem.502.109.
Fazi, Laura, Carla Andreani, Cadia D’Ottavi, Leonardo Duranti, Pietro Morales, Enrico Preziosi, Anna Prioriello et al. "Characterization of Conductive Carbon Nanotubes/Polymer Composites for Stretchable Sensors and Transducers". Molecules 28, n. 4 (13 febbraio 2023): 1764. http://dx.doi.org/10.3390/molecules28041764.
Zubir, Syazana Ahmad, Ernie Suzana Ali e Sahrim Ahmad. "Thermal and Mechanical Characterizations of Nanoclay/Palm Oil Polyol Based Polyurethane Composites". Key Engineering Materials 673 (gennaio 2016): 127–30. http://dx.doi.org/10.4028/www.scientific.net/kem.673.127.
Lu, Gang, Changgeng Shuai, Yinsong Liu, Xue Yang e Xiaoyang Hu. "Preparation and Dielectric Sensitivity of Polyurethane Composite Fiber Membrane Filled with BaTiO3". Membranes 12, n. 4 (26 marzo 2022): 364. http://dx.doi.org/10.3390/membranes12040364.
Bai, Jingjing, Weijie Ren, Yulong Wang, Xiaoxia Li, Cheng Zhang, Zhenzhong Li e Zhongyuan Xie. "High-performance thermoplastic polyurethane elastomer/carbon dots bulk nanocomposites with strong luminescence". High Performance Polymers 32, n. 7 (27 febbraio 2020): 857–67. http://dx.doi.org/10.1177/0954008320907123.
Huang, Guotao, Suyuan Li, Yucai Li, Xin Wu, Xinxing Feng, Yuan Gui, Jianping Deng, Cao Wang e Kai Pan. "Preparation and characterization of microcellular foamed thermoplastic polyamide elastomer composite consisting of EVA / TPAE1012". Journal of Applied Polymer Science 138, n. 37 (7 maggio 2021): 50952. http://dx.doi.org/10.1002/app.50952.
Xu, Peijun, Zhen Zhu, Yadong Wang, Peiliang Cong, Danggang Li, Jizhuang Hui e Min Ye. "Phase structure characterization and compatibilization mechanism of epoxy asphalt modified by thermoplastic elastomer (SBS)". Construction and Building Materials 320 (febbraio 2022): 126262. http://dx.doi.org/10.1016/j.conbuildmat.2021.126262.
Liaw, Wen-Chang, Jung Chang-Chien, Hung Kang, Yu-Lin Cheng e Li-Wen FU. "A Straightforward Synthesis and Characterization of a New Poly(imide siloxane)-based Thermoplastic Elastomer". Polymer Journal 40, n. 2 (18 dicembre 2007): 116–25. http://dx.doi.org/10.1295/polymj.pj2007128.
Wei Fang, Xiaodong Fan, Hongqiao Jiao, Zhengwei Jin, Wei Yuan, Angui Zhang e Tao Zhou. "Characterization and Properties of Thermoplastic Polyether Elastomer/Polyoxymethylene Blends Prepared by Melt-Mixing Method". Polymer Science, Series A 61, n. 6 (novembre 2019): 890–96. http://dx.doi.org/10.1134/s0965545x20010034.
Khaled, Walid Bin, e Dan Sameoto. "Fabrication and Characterization of Thermoplastic Elastomer Dry Adhesives with High Strength and Low Contamination". ACS Applied Materials & Interfaces 6, n. 9 (22 aprile 2014): 6806–15. http://dx.doi.org/10.1021/am500616a.
Sono, Masayo, Kenji Kinashi, Wataru Sakai e Naoto Tsutsumi. "Spin-Trapping Analysis and Characterization of Thermal Degradation of Thermoplastic Poly(ether–ester) Elastomer". Macromolecules 51, n. 3 (30 gennaio 2018): 1088–99. http://dx.doi.org/10.1021/acs.macromol.7b02654.
Tan, Kuilong, Chunxi Li, Hong Meng e Zihao Wang. "Preparation and characterization of thermoplastic elastomer of poly(vinyl chloride) and chlorinated waste rubber". Polymer Testing 28, n. 1 (febbraio 2009): 2–7. http://dx.doi.org/10.1016/j.polymertesting.2008.08.003.
Hassan, Medhat M., Raouf O. Aly, Jehan A. Hasanen e El Sayed F. El Sayed. "Fabrication and characterization of gamma-irradiated recycled (thermoplastic/elastomer) matrix filled with feldspar composites". Journal of Thermal Analysis and Calorimetry 116, n. 1 (8 dicembre 2013): 161–68. http://dx.doi.org/10.1007/s10973-013-3450-3.
Liu, Quanyong, Ming Tian, Tao Ding, Rui Shi, Yuxing Feng, Liqun Zhang, Dafu Chen e Wei Tian. "Preparation and characterization of a thermoplastic poly(glycerol sebacate) elastomer by two-step method". Journal of Applied Polymer Science 103, n. 3 (2006): 1412–19. http://dx.doi.org/10.1002/app.24394.
Onyu, Kannika, Rungsima Yeetsorn e Jeff Gostick. "Fabrication of Bipolar Plates from Thermoplastic Elastomer Composites for Vanadium Redox Flow Battery". Polymers 14, n. 11 (25 maggio 2022): 2143. http://dx.doi.org/10.3390/polym14112143.
Yang, Zhi-Yu, Yi-Ling Chou, Hao-Chun Yang, Chin-Wen Chen e Syang-Peng Rwei. "Synthesis and Characterization of Thermoplastic Poly(Ester Amide)s Elastomer (TPEaE) Obtained from Recycled PET". Journal of Renewable Materials 9, n. 5 (2021): 867–80. http://dx.doi.org/10.32604/jrm.2021.014476.
Zhao, Yi, Ranran Chen, Ruiyan Ni, Honggang Liu, Juan Li e Chen Huang. "Fabrication and characterization of a novel facial mask substrates based on thermoplastic polyester elastomer fibers". Journal of The Textile Institute 111, n. 8 (17 dicembre 2019): 1231–37. http://dx.doi.org/10.1080/00405000.2019.1702612.
Sengupta, Pratip, e Jacques W. M. Noordermeer. "A comparative study of different techniques for microstructural characterization of oil extended thermoplastic elastomer blends". Polymer 46, n. 26 (dicembre 2005): 12298–305. http://dx.doi.org/10.1016/j.polymer.2005.10.075.
Li, Hang, e James L. White. "Preparation and characterization of biaxially oriented films from polybutylene terephthalate based thermoplastic elastomer block copolymers". Polymer Engineering & Science 40, n. 11 (novembre 2000): 2299–310. http://dx.doi.org/10.1002/pen.11362.
Celebi, Hande, Goknur Bayram e Aydin Dogan. "Influence of zinc oxide on thermoplastic elastomer-based composites: Synthesis, processing, structural, and thermal characterization". Polymer Composites 37, n. 8 (16 marzo 2015): 2369–76. http://dx.doi.org/10.1002/pc.23418.
Caputo, P., M. Porto, V. Loise, B. Teltayev e C. Oliviero Rossi. "Analysis of Mechanical Performance of Bitumen Modified with Waste Plastic and Rubber Additives by Rheology and Self Diffusion NMR Experiments". Eurasian Chemico-Technological Journal 21, n. 3 (30 settembre 2019): 235. http://dx.doi.org/10.18321/ectj864.
Machado, Jhonatan Alves, e Luiz Antonio Rasia. "Deposition and evaluation of thermoplastic polyurethane on paper substrate for test specimen production". DELOS: DESARROLLO LOCAL SOSTENIBLE 16, n. 46 (6 settembre 2023): 2272–93. http://dx.doi.org/10.55905/rdelosv16.n46-017.
Syafei, Dedri, e Wimpy Prendika. "Pembuatan Dan Karakterisasi Komposit Termoplastik Elastomer Dari Karet Alam-Polipropilena Bekas Dengan Filler Tandan Kosong Kelapa Sawit". Journal of The Indonesian Society of Integrated Chemistry 13, n. 1 (30 giugno 2021): 52–57. http://dx.doi.org/10.22437/jisic.v13i1.12965.
Hu, Weiguo, Maria D. Ellul, Andy H. Tsou e Sudhin Datta. "Filler Distribution and Domain Size of Elastomer Compounds by Solid-State NMR and AFM". Rubber Chemistry and Technology 80, n. 1 (1 marzo 2007): 1–13. http://dx.doi.org/10.5254/1.3548166.
Ruilong Li, Wei Fang, Xiaodong Fan, Zhengwei Jin e Tao Zhou. "Preparation and Characterization of Polyoxymethlene/Thermoplastic Polyamide Elastomer Blends Compatibilized by Maleic Anhydride Grafted ABS Copolymer". Polymer Science, Series A 63, n. 4 (luglio 2021): 420–28. http://dx.doi.org/10.1134/s0965545x21040052.
Samaniego-Aguilar, Kerly, Estefanía Sánchez-Safont, Alex Arrillaga, Jon Anakabe, Jose Gamez-Perez e Luis Cabedo. "In Service Performance of Toughened PHBV/TPU Blends Obtained by Reactive Extrusion for Injected Parts". Polymers 14, n. 12 (9 giugno 2022): 2337. http://dx.doi.org/10.3390/polym14122337.
Kong, Weibo, Kai Hu, Xiaowei Fu, Dongyang Guo e Jingxin Lei. "Preparation and Characterization of Thermoplastic Elastomer Based on Amino-terminated Polyamide-6 and Diisocyanate-terminated Polytetramethylene Glycol". Polymer-Plastics Technology and Engineering 55, n. 1 (3 novembre 2015): 1–8. http://dx.doi.org/10.1080/03602559.2015.1050510.
Fakirov, S., Z. Denchev, A. A. Apostolov, M. Stamm e C. Fakirov. "Morphological characterization during deformation of a poly(ether ester) thermoplastic elastomer by small-angle x-ray scattering". Colloid & Polymer Science 272, n. 11 (novembre 1994): 1363–72. http://dx.doi.org/10.1007/bf00654166.
Park, Ye-Eun, Hyejin Lee, Imjoo Jung e Sunhee Lee. "Characterization of 3D Printed Wrist Brace with Various Tilting Angles of Re-entrant Pattern Using Thermoplastic Elastomer". Journal of the Korean Society of Clothing and Textiles 46, n. 6 (31 dicembre 2022): 1074–87. http://dx.doi.org/10.5850/jksct.2022.46.6.1074.
Zhang, Chi, Jie Li e Yunjun Luo. "Synthesis and Characterization of 3,3′-Bisazidomethyl Oxetane-3-Azidomethyl-3′-Methyl Oxetane Alternative Block Energetic Thermoplastic Elastomer". Propellants, Explosives, Pyrotechnics 37, n. 2 (29 marzo 2012): 235–40. http://dx.doi.org/10.1002/prep.201100058.
Tanaka, Yasuyuki, Hisaya Sato e Junichi Adachi. "Structural Characterization of Diene Block Copolymers by GPC and Ozonolysis—GPC Measurements". Rubber Chemistry and Technology 60, n. 1 (1 marzo 1987): 25–34. http://dx.doi.org/10.5254/1.3536119.
Eutionnat-Diffo, Prisca Aude, Aurélie Cayla, Yan Chen, Jinping Guan, Vincent Nierstrasz e Christine Campagne. "Development of Flexible and Conductive Immiscible Thermoplastic/Elastomer Monofilament for Smart Textiles Applications Using 3D Printing". Polymers 12, n. 10 (8 ottobre 2020): 2300. http://dx.doi.org/10.3390/polym12102300.