Letteratura scientifica selezionata sul tema "Solid nickel's etching"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Solid nickel's etching".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Solid nickel's etching":
Setyarini, Putu Hadi, Elvin Stefano e Slamet Wahyudi. "STUDY OF ELECTROLESS NICKEL PLATING ON RAPID PROTOTYPING MODEL USING ACRYLONITRILE BUTADIENE STYRENE". Jurnal Rekayasa Mesin 13, n. 1 (22 giugno 2022): 275–81. http://dx.doi.org/10.21776/ub.jrm.2022.013.01.27.
Hołówko, Bartosz, Jakub Karczewski, Sebastian Molin e Piotr Jasiński. "Preparation of Hydrogen Electrodes of Solid Oxide Cells by Infiltration: Effects of the Preparation Procedure on the Resulting Microstructure". Materials 13, n. 1 (27 dicembre 2019): 131. http://dx.doi.org/10.3390/ma13010131.
Gu, Yuan, e John Federici. "Fabrication of a Flexible Current Collector for Lithium Ion Batteries by Inkjet Printing". Batteries 4, n. 3 (3 settembre 2018): 42. http://dx.doi.org/10.3390/batteries4030042.
Horny, Paula, Dominique Drouin, Raynald Gauvin e Gianluigi A. Botton. "Characterization of Phase Transformation by Fe-SEM and Fe-TEM Analysis". Microscopy and Microanalysis 7, S2 (agosto 2001): 490–91. http://dx.doi.org/10.1017/s143192760002852x.
Wittek, Christian-G. R., Lukas Steinhoff, Selina Raumel, Michael Reißfelder, Folke Dencker e Marc C. Wurz. "Process Development for Batch Production of Micro-Milling Tools Made of Silicon Carbide by Means of the Dry Etching Process". Micromachines 14, n. 3 (28 febbraio 2023): 580. http://dx.doi.org/10.3390/mi14030580.
Wada, Yuri, Kaori Miyamoto, Takatoshi Yamada e Toru Kuzumaki. "Forming an Optically Transparent Graphene Film via the Transformation of C60 Molecules". Materials Science Forum 1016 (gennaio 2021): 1549–54. http://dx.doi.org/10.4028/www.scientific.net/msf.1016.1549.
Nakanishi, Kazuhiro, Hiroki Kuroshima, Tsubasa Matsumoto, Takao Inokuma e Norio Tokuda. "Atomically flat diamond (100) surface formation by anisotropic etching of solid-solution reaction of carbon into nickel". Diamond and Related Materials 68 (settembre 2016): 127–30. http://dx.doi.org/10.1016/j.diamond.2016.06.011.
Usenko, Alex, Shailesh Dhungana, Anthony N. Caruso e Stteven L. Bellinger. "Electroless Nickel Plating for Ohmic Contacts to Silicon Power Devices". ECS Meeting Abstracts MA2022-02, n. 23 (9 ottobre 2022): 960. http://dx.doi.org/10.1149/ma2022-0223960mtgabs.
Dung, Nguyen Tien. "Studying the shape of nickel particles when machining by ultrasound-aided electric discharge". Modern Physics Letters B, 24 febbraio 2023. http://dx.doi.org/10.1142/s0217984923400195.
Rey-Mermet, Samuel, e Paul Muralt. "Materials and Design Study for Micromachined Solid Oxide Fuel Cells Membranes". MRS Proceedings 972 (2006). http://dx.doi.org/10.1557/proc-0972-aa07-10-bb08-10.
Tesi sul tema "Solid nickel's etching":
Laourine, Feriel. "Texturation de la surface d’aciers inoxydables par plasmas chlorés et compréhension des mécanismes mis en jeu par l’étude de la gravure du fer, du chrome et du nickel massifs". Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0252.
The structuring at sub-micronic scale of the surface of stainless steels allows to provide them with new functionalities, for example for tribological and optical applications. This thesis is part of the ANR SPOT project which aims to structure the surface of austenitic and martensitic steels on a submicronic scale by dry etching. In this work, we have developed a plasma process with a mixture of chlorine and argon for the etching of stainless steels. The development of this process was carried out based on the study of the etching of the main metals that make up these steels, namely, iron, chromium and nickel. Based on measurements of etching speeds, as well as on plasma diagnostic techniques, we have shown that, in a chlorine and argon plasma, iron is the most etched element, followed by chromium, then nickel. The metallic and the stainless steels etched samples were analyzed by surface characterization techniques, in particular X photoelectron spectrometry (XPS) analyzes. We have also studied the variation of the etching speeds of these metals and steels as a function of the temperature of the substrates. These studies have enabled us to establish the mechanisms involved in the etching of metallic elements. We have shown that in a plasma of chlorine and argon, iron is mainly etched by a chemical mechanism which follows an Arrhenius law. This mechanism would be based on the formation of volatile iron chlorides. In the case of chromium, the etching requires ionic assistance in order to desorb the non-volatile chromium chlorides formed on the surface of the material. Finally, for nickel, we observed that the etching speed decreases when the temperature increases. In this case, observations with a scanning electron microscope made it possible to highlight the formation of swellings rich in chlorine. XPS analyzes of the etched surface of nickel suggest that these swellings are due to the formation of non-volatile nickel chlorides. These chlorides would be at the origin of the decrease in the rate of etching of nickel, the sputtering of which would be blocked by the presence of these chlorides. Understanding these mechanisms led to conclude that, in a chlorinated plasma, the blocking element in the etching of stainless steels is nickel
Atti di convegni sul tema "Solid nickel's etching":
Pothula, Surya V., e Yong X. Gan. "Fabrication of Nickel/Zirconium Anode for Solid Oxide Fuel Cells by Electrochemical Method". In ASME 2010 International Manufacturing Science and Engineering Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/msec2010-34225.
Hsueh, Tao-Hung, Hung-Wen Huang, Chih-Chiang Kao, Ya-Hsien Chang, Miaochia Ou-Yang, Hao-Chung Kuo e Shing-Chung Wang. "InGaN/GaN Multi-Quantum-Well Nanorods Fabricated by Plasma Etching Using Self-assembled Nickel Nano-masks". In 2004 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2004. http://dx.doi.org/10.7567/ssdm.2004.g-7-3.
Pan, Feng, e Adam Huang. "Investigation of Oxide-Removal of Various Metal Particles for Fabricating MEMS-Based Corrosion Sensor". In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-12045.
Velukkudi Santhanam, Senthil Kumar, Jeffrin Michael Gnana Anbalagan, Shanmuga Sundaram Karibeeran, Dhanashekar Manickam e Ramaiyan Sankar. "Multi Response Optimization of Friction Stir Processing Parameters on Cryo-Rolled AZ31B Alloys". In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-23198.
Pua, Lee M., e S. O. Rumbold. "Industrial Microchannel Devices: Where Are We Today?" In ASME 2003 1st International Conference on Microchannels and Minichannels. ASMEDC, 2003. http://dx.doi.org/10.1115/icmm2003-1101.