Articoli di riviste sul tema "Simulation-Based Validation process"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Simulation-Based Validation process".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.
Bause, Falko, Jan Kriege e Sebastian Vastag. "Efficient Validation of Process-based Simulation Models". SNE Simulation Notes Europe 19, n. 2 (agosto 2009): 30–38. http://dx.doi.org/10.11128/sne.19.tn.09936.
ZHANG, Beike, Xin XU, Xin MA e Chongguang WU. "SDG-based Model Validation in Chemical Process Simulation". Chinese Journal of Chemical Engineering 21, n. 8 (agosto 2013): 876–85. http://dx.doi.org/10.1016/s1004-9541(13)60554-6.
Funakoshi, K., e K. Mizuno. "A rule-based VLSI process flow validation system with macroscopic process simulation". IEEE Transactions on Semiconductor Manufacturing 3, n. 4 (1990): 239–46. http://dx.doi.org/10.1109/66.61973.
Sun, Jun, Bei Ke Zhang e Chong Guang Wu. "Life Cycle VV&A Simulation Modeling Process Based on Validation". Applied Mechanics and Materials 80-81 (luglio 2011): 511–15. http://dx.doi.org/10.4028/www.scientific.net/amm.80-81.511.
Shi, Peng, Fei Liu e Ming Yang. "Critical Problems in Validation Process of Simulation Models". Advanced Materials Research 187 (febbraio 2011): 422–27. http://dx.doi.org/10.4028/www.scientific.net/amr.187.422.
Ruediger, Patrick, e Hans Hagen. "Dealing with Uncertainties in Manufacturing Process Simulations". Applied Mechanics and Materials 869 (agosto 2017): 226–33. http://dx.doi.org/10.4028/www.scientific.net/amm.869.226.
Gull, Hina, Saleh Alrashed e Sardar Zafar Iqbal. "Validation of Usability Driven Web based Software Process Model using Simulation". Procedia Computer Science 62 (2015): 487–94. http://dx.doi.org/10.1016/j.procs.2015.08.520.
Zizler, Elisabeth, Matthias Wenk e Benedikt Bräutigam. "Simulation-Based Development and Validation of Energy Management Concepts". Applied Mechanics and Materials 871 (ottobre 2017): 36–43. http://dx.doi.org/10.4028/www.scientific.net/amm.871.36.
Hawe, Glenn I., Graham Coates, Duncan T. Wilson e Roger S. Crouch. "Improving Agent-Based Simulation of Major Incident Response in the United Kingdom through Conceptual and Operational Validation". International Journal of Information Systems for Crisis Response and Management 7, n. 4 (ottobre 2015): 1–25. http://dx.doi.org/10.4018/ijiscram.2015100101.
Butenuth, Matthias, Thorsten Scheibe, David Seidel e Frank Schrödel. "Simulation-based Function Development and Validation for Autonomous Driving as Integrated Process". ATZelectronics worldwide 14, n. 12 (dicembre 2019): 72–77. http://dx.doi.org/10.1007/s38314-019-0131-4.
Ben Lenda, O., A. Tara, O. Jbara e E. Saad. "Numerical simulation of investment casting process of nickel-based alloy." MATEC Web of Conferences 286 (2019): 03005. http://dx.doi.org/10.1051/matecconf/201928603005.
HAN, Seungwoo, Yong-Ho KO, Taehoon HONG, Choongwan KOO e Sangyoub LEE. "Framework for the validation of simulation-based productivity analysis: focused on curtain wall construction process". JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT 23, n. 2 (13 luglio 2016): 163–72. http://dx.doi.org/10.3846/13923730.2014.992468.
Mazak, Julia, Fritz Klocke, Thomas Bergs, Christian Brecher e Christoph Löpenhaus. "Simulation-based process analysis for discontinuous cutting of generated bevel gears". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233, n. 21-22 (29 aprile 2019): 7378–90. http://dx.doi.org/10.1177/0954406219845409.
NING, Xiaolei, Xin ZHAO, Yingxia WU, Junmin ZHAO, Meibo LYU e Yun CHEN. "Research on simulation model validation based on probability relational analysis". Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University 39, n. 5 (ottobre 2021): 1158–67. http://dx.doi.org/10.1051/jnwpu/20213951158.
Tinti, Fabrizio, Marco Fontana, Leonardo Daniela Scintilla, Annalisa Mirabile e Bart Carleer. "Assembly simulation development and validation project with industrial applications". IOP Conference Series: Materials Science and Engineering 1238, n. 1 (1 maggio 2022): 012078. http://dx.doi.org/10.1088/1757-899x/1238/1/012078.
Zhou, Dong, Mei Hui Wang, Lin Huo e Chuan Lv. "Virtual Maintenance Process Modeling and Simulation". Applied Mechanics and Materials 44-47 (dicembre 2010): 527–31. http://dx.doi.org/10.4028/www.scientific.net/amm.44-47.527.
Martin, Niels Lasse, Ann Kathrin Schomberg, Jan Henrik Finke, Tim Gyung-min Abraham, Arno Kwade e Christoph Herrmann. "Process Modeling and Simulation of Tableting—An Agent-Based Simulation Methodology for Direct Compression". Pharmaceutics 13, n. 7 (30 giugno 2021): 996. http://dx.doi.org/10.3390/pharmaceutics13070996.
Zhou, Ling, Zheming Zhang, Chris Chivetta e Ramesh Agarwal. "Process Simulation and Validation of Chemical-Looping with Oxygen Uncoupling (CLOU) Process using Cu-Based Oxygen Carrier". Energy & Fuels 27, n. 11 (29 ottobre 2013): 6906–12. http://dx.doi.org/10.1021/ef401637q.
Abdullah, A. B., e Z. Samad. "Compressive Behavior of AA6061 at Room Temperature and Validation of the FE Model Based on Optical 3D Measurement Technique". Key Engineering Materials 594-595 (dicembre 2013): 909–13. http://dx.doi.org/10.4028/www.scientific.net/kem.594-595.909.
Lee, Minhyung, Gwanyong Park, Hyangin Jang e Changmin Kim. "Development of Building CFD Model Design Process Based on BIM". Applied Sciences 11, n. 3 (29 gennaio 2021): 1252. http://dx.doi.org/10.3390/app11031252.
Elkaseer, A., e E. B. Brousseau. "Modelling the surface generation process during AFM probe-based machining: simulation and experimental validation". Surface Topography: Metrology and Properties 2, n. 2 (23 dicembre 2013): 025001. http://dx.doi.org/10.1088/2051-672x/2/2/025001.
Schemmel, Reinhard, Nico Müller, Ludger Klahold, Tobias Hemsel e Walter Sextro. "Experimental parameter identification and validation of a process model for ultrasonic heavy wire bonding". International Symposium on Microelectronics 2021, n. 1 (1 ottobre 2021): 000346–55. http://dx.doi.org/10.4071/1085-8024-2021.1.000346.
Kaiser, Christoph, Martin Zubeil, Karl Roll e Wolfram Volk. "New Diagnostic Techniques for an Automated Hemming Validation of Hang-On Parts". Key Engineering Materials 639 (marzo 2015): 509–16. http://dx.doi.org/10.4028/www.scientific.net/kem.639.509.
Jiang, Aipeng, Qiang Ding, Jian Wang, Shu Jiangzhou, Wen Cheng e Changxin Xing. "Mathematical Modeling and Simulation of SWRO Process Based on Simultaneous Method". Journal of Applied Mathematics 2014 (2014): 1–11. http://dx.doi.org/10.1155/2014/908569.
Asmelash, Mebrahitom, Nurul Najihaha, Azmir Azhari e Freselam Mulubrhan. "Simulation modeling of a manufacturing process using Tecnomatix plant simulation software". Journal of Modern Manufacturing Systems and Technology 5, n. 1 (30 marzo 2021): 56–62. http://dx.doi.org/10.15282/jmmst.v5i1.6083.
Bandieramonte, Marilena, John Derek Chapman, Justin Chiu, Heather Gray e Miha Muskinja. "Multi-threaded simulation for ATLAS: challenges and validation strategy". EPJ Web of Conferences 245 (2020): 02001. http://dx.doi.org/10.1051/epjconf/202024502001.
Albinsson, Anton, Fredrik Bruzelius, Bengt Jacobson e Shenhai Ran. "Validation of vehicle-based tyre testing methods". Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 233, n. 1 (20 giugno 2018): 18–27. http://dx.doi.org/10.1177/0954407018777581.
Luo, Lu Feng, Shuang Sun, Qing Guo Meng e Quo Qing Li. "The Process Planning Simulation of Multi-Axis Numerical Control Based on Virtual Reality". Advanced Materials Research 97-101 (marzo 2010): 3146–50. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.3146.
Istiqomah, Fikriana Nur, Made Tirta e Dian Anggareni. "Discriminant AnalysisFor Cluster Validation In A Case Study of District Grouping In Jember Regency Based On Poverty". Jurnal ILMU DASAR 20, n. 2 (16 luglio 2019): 129. http://dx.doi.org/10.19184/jid.v20i2.9862.
REN, Chengkun, Fenfen XIONG, Yuanhao WANG, Na LI, Bo JIANG e Zhiping GUO. "Model validation method by considering uncertainty for numerical simulation". Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University 41, n. 5 (ottobre 2023): 987–95. http://dx.doi.org/10.1051/jnwpu/20234150987.
Lee, John D. "Validation of a Simulation Model to Evaluate Crew Size". Proceedings of the Human Factors and Ergonomics Society Annual Meeting 41, n. 2 (ottobre 1997): 978–82. http://dx.doi.org/10.1177/107118139704100257.
Schnös, Florian, Dirk Hartmann, Birgit Obst e Glenn Glashagen. "GPU accelerated voxel-based machining simulation". International Journal of Advanced Manufacturing Technology 115, n. 1-2 (8 maggio 2021): 275–89. http://dx.doi.org/10.1007/s00170-021-07001-w.
Burkolter, Dina, Annette Kluge, Sinan German e Britta Grauel. "Waste Water Treatment Simulation (WaTr Sim): Validation of a New Process Control Simulation Tool for Experimental Training Research". Proceedings of the Human Factors and Ergonomics Society Annual Meeting 53, n. 26 (ottobre 2009): 1969–73. http://dx.doi.org/10.1177/154193120905302619.
Yang, Dayong, Furui Wei, Wei Wang, Yuchen Zhang e Lingxin Zeng. "Finite Element Modelling and Experimental Validation of the Graphite Cutting Process". Processes 11, n. 9 (25 agosto 2023): 2546. http://dx.doi.org/10.3390/pr11092546.
Liu, Peng Tao, Rui Ming Ren, Tian Cang Zhang e Dong Ying Ju. "Numerical Simulation and Experiment of Linear Friction Welding Process of Ti6Al4V Alloy". Materials Science Forum 675-677 (febbraio 2011): 925–28. http://dx.doi.org/10.4028/www.scientific.net/msf.675-677.925.
Zhong, Gao Yan, e Yan Qing Wang. "NC Ultrasonic Machining Efficiency: Neural Network-Based Modeling and Simulation". Advanced Materials Research 291-294 (luglio 2011): 406–10. http://dx.doi.org/10.4028/www.scientific.net/amr.291-294.406.
Fitriyawany, Fitriyawany, Fena Julita e Cut Rizki Mustika. "Development of e-Module based on Simulation PhET Fluid Material Dynamic in Senior High School". Asian Journal of Science Education 5, n. 2 (29 ottobre 2023): 39–47. http://dx.doi.org/10.24815/ajse.v5i2.32420.
Tamara, Leon Oviedo, Mikhail S. Lipkin e Mikhail V. Lukovkin. "Effect of Current Density Distribution in the Zinc Plating Process". Solid State Phenomena 316 (aprile 2021): 839–44. http://dx.doi.org/10.4028/www.scientific.net/ssp.316.839.
Buranathiti, Thaweepat, Jian Cao, Wei Chen, Lusine Baghdasaryan e Z. Cedric Xia. "Approaches for Model Validation: Methodology and Illustration on a Sheet Metal Flanging Process". Journal of Manufacturing Science and Engineering 128, n. 2 (1 maggio 2006): 588–97. http://dx.doi.org/10.1115/1.1807852.
Cao, Wen Jiong, De Zhi Yang, Xin Wei Lu, Yi He e Zhao Yao Zhou. "Numerical Simulation of Flow and Heat Transfer during Filling Process Based on SPH Method". Advanced Materials Research 658 (gennaio 2013): 276–80. http://dx.doi.org/10.4028/www.scientific.net/amr.658.276.
Van Rhijn, T., W. Du Preez, M. Maringa e D. Kouprianoff. "Towards predicting process parameters for selective laser melting of titanium alloys through the modelling of melt pool characteristics". Suid-Afrikaanse Tydskrif vir Natuurwetenskap en Tegnologie 40, n. 1 (24 gennaio 2022): 168–73. http://dx.doi.org/10.36303/satnt.2021cosaami.32.
Jadrić, Mario, Ivana Ninčević Pašalić e Maja Ćukušić. "Process Mining Contributions to Discrete-event Simulation Modelling". Business Systems Research Journal 11, n. 2 (1 ottobre 2020): 51–72. http://dx.doi.org/10.2478/bsrj-2020-0015.
Zhao, Yang, Jie Jin e Jiang Fan. "Research on Multi-Solver Simulation Interface of Aero-Engine Compressor". Applied Mechanics and Materials 404 (settembre 2013): 331–36. http://dx.doi.org/10.4028/www.scientific.net/amm.404.331.
Fourlakidis, Vasilios, Ilia Belov e Attila Diószegi. "Strength Prediction for Pearlitic Lamellar Graphite Iron: Model Validation". Metals 8, n. 9 (31 agosto 2018): 684. http://dx.doi.org/10.3390/met8090684.
Recknagel, Friedrich, Lydia Cetin e Byron Zhang. "Process-based simulation library SALMO-OO for lake ecosystems. Part 1: Object-oriented implementation and validation". Ecological Informatics 3, n. 2 (aprile 2008): 170–80. http://dx.doi.org/10.1016/j.ecoinf.2008.04.002.
Istiqomah, Fikriana Nur, I. Made Tirta e Dian Anggraeni. "ANALISIS DISKRIMINAN UNTUK VALIDASI CLUSTER PADA STUDI KASUS PENGELOMPOKAN KECAMATAN DI KABUPATEN JEMBER BERDASARKAN STATUS KEMISKINAN". Majalah Ilmiah Matematika dan Statistika 18, n. 1 (1 marzo 2018): 1. http://dx.doi.org/10.19184/mims.v18i1.17239.
Han, Xiaolan, Shengdun Zhao, Chen Liu, Chao Chen e Fan Xu. "Optimization of geometrical design of clinching tools in clinching process with extensible dies". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231, n. 21 (19 luglio 2016): 3889–97. http://dx.doi.org/10.1177/0954406216660336.
Sykora, Henrik Tamás, Attila Kovács e Dániel Bachrathy. "VALIDATION OF CUTTING FORCE CHARACTERISTIC FOR COMPLEX TOOLPATH". Acta Polytechnica CTU Proceedings 3 (11 febbraio 2016): 78–81. http://dx.doi.org/10.14311/app.2016.3.0078.
Berger, Evan, Michael Miles, Andrew Curtis, Paul Blackhurst e Yuri Hovanski. "2D Axisymmetric Modeling of Refill Friction Stir Spot Welding and Experimental Validation". Journal of Manufacturing and Materials Processing 6, n. 4 (18 agosto 2022): 89. http://dx.doi.org/10.3390/jmmp6040089.
Lee, C., S. W. Choi e I. B. Lee. "Sensor fault diagnosis in a wastewater treatment process". Water Science and Technology 53, n. 1 (1 gennaio 2006): 251–57. http://dx.doi.org/10.2166/wst.2006.027.