Letteratura scientifica selezionata sul tema "Résistance de frottement"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Indice
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Résistance de frottement".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Résistance de frottement"
Debbache, S., J. Masounave e L. Scheed. "Résistance Au Frottement Sévère De Composites Métalliques à Particules". Canadian Metallurgical Quarterly 34, n. 4 (ottobre 1995): 363–71. http://dx.doi.org/10.1179/cmq.1995.34.4.363.
Testo completoDoreau-Malioche, Jeanne, Gaël Combe e Gioacchino Viggiani. "Étude du comportement de l’interface sable-pieu sous chargement axial monotone et cyclique à l’échelle granulaire". Revue Française de Géotechnique, n. 166 (2021): 4. http://dx.doi.org/10.1051/geotech/2021005.
Testo completoKazamer, Norbert, Stephania Kossman, István Baranyi, Didier Chicot, Viorel-Aurel Serban, Zoltán Rajnai e Mircea Voda. "Effet de l’addition de TiB2 sur les propriétés mécaniques et tribologiques de revêtements NiCrBSi déposés par projection thermique". Matériaux & Techniques 106, n. 2 (2018): 202. http://dx.doi.org/10.1051/mattech/2018026.
Testo completoStavropoulou, Eleni, Christophe Dano, Marc Boulon, Matthieu Briffaut, Ankit Sharma e Alain Puech. "Résistance au cisaillement des interfaces roche / coulis représentatives de pieux offshore". Revue Française de Géotechnique, n. 158 (2019): 6. http://dx.doi.org/10.1051/geotech/2019012.
Testo completoBen Aissa, Chokri, e Kaouther Khlifi. "Caractérisation nano-mécanique et tribologique des revêtements TiO2 et TiN déposés sur acier inoxydable 316L pour applications biomédicales". Matériaux & Techniques 109, n. 1 (2021): 104. http://dx.doi.org/10.1051/mattech/2021016.
Testo completoLépinasse, E., M. Marion, S. Guella, S. Alexandrova e A. Saboni. "Absorption et désorption du dioxyde de souffre par des gouttes d'eau de fort diamètre en chute." Revue des sciences de l'eau 18, n. 1 (12 aprile 2005): 5–23. http://dx.doi.org/10.7202/705547ar.
Testo completoTesi sul tema "Résistance de frottement"
Marchand, Anne-Sophie. "Etude de la résistance thermique de contact à l'interface de solides déformables en frottement". Lyon, INSA, 1998. http://theses.insa-lyon.fr/publication/1998ISAL0113/these.pdf.
Testo completoA numerical study is realised to estimate the Thermal Contact Resistance (TCR) between the tool and the workpiece during forming processes. The approach is based on a thermo-mechanical microscopic model of the contacting surfaces which assumes that during the relative motion between the tool and the workpiece, the perfectly rigid tool asperities create plastic waves on the workpiece contact surface. Empirical relationships are proposed, to determine the TCR as a function of the interface geometry and the thermal properties. The predictive capability of the relationships is obtained by comparing its outputs with the TCR determined from the numerical calculation. Furthermore, an experimental set up is designed so as to compare the experimental and the numerical values of the TCR and to validate the correlations for dry contacts. Another validation is also done by comparing the results with other thermal models for a particular geometry. These correlations are introduced in the numerical code of hot forming processes
Aliouche, Djamel. "Contribution à l'étude des mécanismes de frottement des étoffes". Mulhouse, 1991. http://www.theses.fr/1991MULH0189.
Testo completoBollo-Kamara, Nicholas Odunola. "Étude de la mobilisation du frottement d'un géotextile sollicite en traction dans un milieu analogique bidimensionnel". Lyon, INSA, 1992. http://www.theses.fr/1992ISAL0071.
Testo completoThis thesis contributes to the understanding of the mechanism (friction) governing the behaviour of fabrics (geotextiles) subjected to tensile forces. A review of existing literature on friction mobilisation at soil-geotextile interface as well as test methods (shear and pull out or extraction) with respect to the latter are presented. A theoretical analysis of the behaviour of geotextiles under extraction in non cohesive soils is arso resented. The resulting constitutive relationships provide the basis for the exploitation of the pull out tests carried out to determine the interface law parameters. The experimental study includes pull out tests in a bidimensional analogue model (SCHNEEBELI's cylindrical steel rollers), and friction tests using shear equipement for an eventual comparison with the extraction test results
Ben, Abdallah Adel. "Influence de la microstructure et des propriétés des matériaux céramiques sur leur résistance à l'usure et leur comportement en frottement". Ecully, Ecole centrale de Lyon, 1990. http://www.theses.fr/1999ECDLA021.
Testo completoBenkhalifa, Mohamed Tai͏̈eb. "Ecoulement visqueux de diffusion binaire dans un pore : application à la détermination du coefficient de diffusion équivalent dans un milieu poreux". Poitiers, 1994. http://www.theses.fr/1994POIT2327.
Testo completoChampagne, Karine. "Contribution à l'étude des paramètres de résistance au cisaillement des barrages en béton du Québec". Mémoire, Université de Sherbrooke, 2012. http://hdl.handle.net/11143/5512.
Testo completoDetourbe, Sylvie. "Contribution à l'étude des traitements mixtes de nitruration et d'oxydation assistés par plasma en vue d'améliorer la résistance à la corrosion atmosphèrique des aciers". Vandoeuvre-les-Nancy, INPL, 1989. http://www.theses.fr/1989NAN10399.
Testo completoLe, Thiet Trung. "Etude du processus de vibrofonçage d'inclusions cylindriques en chambre d'étalonnage : application aux pieux". Marne-la-vallée, ENPC, 2005. https://pastel.archives-ouvertes.fr/pastel-00001557.
Testo completoMeheux, Mathilde Odile Anne. "Influence des additifs de lubrification sur la formation de tribofilms, le coefficient de frottement et la durée de vie en fatigue des roulements". Ecully, Ecole centrale de Lyon, 2009. http://www.theses.fr/2009ECDL0001.
Testo completoGears, rolling bearings and synchronizers are lubricated with a single oil, selected according to gear specifications in manual transmissions. Lubricant related Rolling Contact Fatigue (RCF) damage has been reported in bearings. Several explanations can be considered, but this work focuses on the effect of lubricant additives. As explained in the literature, the lubricant (base oil and additives) can react at the surface of the test pieces and/or on the fatigue crack faces open to the oil. Some effects like hydrogen embrittlement are known, but it has not been clearly established yet whether the presence of tribofilms and the adsorption of additives contribute to the initiation and/or propagation of fatigue cracks. The influence of lubricant formulation on fatigue life has been evaluated using accelerated fatigue tests (on a twin disc machine) performed under pure rolling and sliding conditions. Under pure rolling, the detergent containing oil generates a reduction of fatigue life compared with the other oils tested. The tribofilm formed at the surface of the discs was studied using surface analysis techniques (EDX, AES). It shows similarity in terms of elemental composition and thickness with model tribofilms generated in a ball on disc tribometer (Mini Traction Machine). The latter was used to evaluate the influence of lubricant formulation on tribofilm formation. The detergent seems to be a key additive generating a thick surface tribofilm. Finally, the chemical content of a crack was analysed. A FIB cross section allowed EDX analysis of the faces. Additive elements were found. Fatigue life did not vary much between the formulations tested under sliding conditions, but the presence of additives in the crack allows the following hypothesis : the chemical content of a lubricant can influence crack propagation
Tcheukam, Toko Denis. "Étude de la couche limite générée par l'action de la houle et/ou du courant sur fond hydrauliquement lisse : application au transport sédimentaire". Le Havre, 1997. http://www.theses.fr/1997LEHA0001.
Testo completoLibri sul tema "Résistance de frottement"
Idelchik, I. E. Flow Resistance: A Design Guide for Engineers. Taylor & Francis Group, 2017.
Cerca il testo completoIdelchik, I. E. Flow Resistance: A Design Guide for Engineers. CRC Press LLC, 2017.
Cerca il testo completo