Accedi

Bibliografie tematiche / Refractory materials / Articoli di riviste

Segui questo link per vedere altri tipi di pubblicazioni sul tema: Refractory materials.

Articoli di riviste sul tema "Refractory materials"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 30 luglio 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Refractory materials".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.

1

Albrecht, Gelon, Stefan Kaiser, Harald Giessen e Mario Hentschel. "Refractory Plasmonics without Refractory Materials". Nano Letters 17, n. 10 (8 settembre 2017): 6402–8. http://dx.doi.org/10.1021/acs.nanolett.7b03303.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Vakhula, Orest, Myron Pona, Ivan Solokha, Oksana Koziy e Maria Petruk. "Ceramic Protective Coatings for Cordierite-Mullite Refractory Materials". Chemistry & Chemical Technology 15, n. 2 (15 maggio 2021): 247–53. http://dx.doi.org/10.23939/chcht15.02.247.

Testo completo

Abstract (sommario):

The issue of cordierite-mullite refractories protection from the influence of aggressive factors is considered. The interaction between the components of protective coatings has been studied. It has been investigated that in the systems based on poly(methylphenylsiloxane) filled with magnesium oxide, alumina and quartz sand, the synthesis of cordierite (2MgO•2Al2O3•5SiO2), mullite (3Al2O3•2SiO2) or magnesium aluminate spinel (MgO•Al2O3) is possible. The basic composition of the protective coating, which can be recommended for the protection of cordierite-mullite refractory, is proposed.

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Suvorov, S. A. "Elastic refractory materials". Refractories and Industrial Ceramics 48, n. 3 (maggio 2007): 202–7. http://dx.doi.org/10.1007/s11148-007-0060-2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Simon, Franz-Georg, Burkart Adamczyk e Gerd Kley. "Refractory Materials from Waste". MATERIALS TRANSACTIONS 44, n. 7 (2003): 1251–54. http://dx.doi.org/10.2320/matertrans.44.1251.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Ismailov, M. B., e Zh A. Gabayev. "SHS of refractory materials". Journal of Engineering Physics and Thermophysics 65, n. 5 (1994): 1131–33. http://dx.doi.org/10.1007/bf00862048.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Dudnik, E. V., A. V. Shevchenko, A. K. Ruban, Z. A. Zaitseva, V. M. Vereshchaka, V. P. Red’ko e A. A. Chekhovskii. "Refractory and ceramic materials". Powder Metallurgy and Metal Ceramics 46, n. 7-8 (luglio 2007): 345–56. http://dx.doi.org/10.1007/s11106-007-0055-z.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Vakhula, Orest, Myron Pona, Ivan Solokha e Igor Poznyak. "Research of Corrosive Destruction Mechanism of Cordierite-Mullite Refractory Materials". Chemistry & Chemical Technology 4, n. 1 (20 marzo 2010): 81–84. http://dx.doi.org/10.23939/chcht04.01.081.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Seifert, Severin, Sebastian Dittrich e Jürgen Bach. "Recovery of Raw Materials from Ceramic Waste Materials for the Refractory Industry". Processes 9, n. 2 (26 gennaio 2021): 228. http://dx.doi.org/10.3390/pr9020228.

Testo completo

Abstract (sommario):

Products of the refractory industry are key for the production of heavy industry goods such as steel and iron, cement, aluminum and glass. Corresponding industries are dependent on thermal processes to manufacture their products, which in turn would not be possible if there were no refractory materials, such as refractory bricks or refractory mixes. For the production of refractory materials, primary raw materials or semi-finished products such as corundum, bauxite or zircon are used. Industrial recycling of refractory raw materials would reduce dependencies, conserve resources and reduce global CO2 emissions. Today, only a small quantity of the refractory materials used can be recycled because raw materials (regenerates) obtained from end-of-life materials are of insufficient quality. In this study, regenerates from different refractory waste products could be obtained using the innovative processing method of electrodynamic fragmentation. It was shown that these regenerates have a high chemical purity and are therefore of high quality. It could be confirmed that the use of these regenerates in refractory materials does not affect the characteristic properties, such as refractoriness and mechanical strength. Thus, electrodynamic fragmentation is a process, which is able to provide high-quality raw materials for the refractory industry from used materials.

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Zhang, Cai Li, e Xiao Qing Song. "Fabrication and Properties of New Building Materials by Reutilization Refractory Materials". Applied Mechanics and Materials 507 (gennaio 2014): 388–91. http://dx.doi.org/10.4028/www.scientific.net/amm.507.388.

Testo completo

Abstract (sommario):

The utilization of domestic waste refractory materials are reviewed, and points out that China exists to the comprehensive utilization of waste refractory material in question, discusses the necessity of recycling of waste refractory material; focuses on the composite insulation board has the advantages of organic heat preservation material strength coefficient of heat conductivity of inorganic insulation materials of high and low flame retardant, for example discusses the feasibility of waste refractory materials used in building materials field, comprehensive recycling of waste refractory material resources and corresponding to focus attention on the utilization of the problems put forward their views.

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Mukasyan, A. S., e J. D. E. White. "Combustion joining of refractory materials". International Journal of Self-Propagating High-Temperature Synthesis 16, n. 3 (settembre 2007): 154–68. http://dx.doi.org/10.3103/s1061386207030089.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

11

Joswiak, D. J., D. E. Brownlee, A. N. Nguyen e S. Messenger. "Refractory materials in comet samples". Meteoritics & Planetary Science 52, n. 8 (12 giugno 2017): 1612–48. http://dx.doi.org/10.1111/maps.12877.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

12

Opachina, R. "Magnohrom: Producer of refractory materials". Refractories and Industrial Ceramics 40, n. 3-4 (marzo 1999): 174–75. http://dx.doi.org/10.1007/bf02762377.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

13

Coughanowr, Corinne A., Bernard A. Dissaux, Rolf H. Muller e Charles W. Tobias. "Electrochemical machining of refractory materials". Journal of Applied Electrochemistry 16, n. 3 (maggio 1986): 345–56. http://dx.doi.org/10.1007/bf01008844.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

14

Averkov, E. I., e V. N. Zapechnikov. "Radiation properties of refractory materials". Refractories 31, n. 1-2 (gennaio 1990): 82–90. http://dx.doi.org/10.1007/bf01282493.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

15

Hong-Xia, LI. "Development Overview of Refractory Materials". Journal of Inorganic Materials 33, n. 2 (2018): 198. http://dx.doi.org/10.15541/jim20170582.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

16

Bazhin, V. Yu, D. V. Makushin e Yu N. Gagulin. "Contemporary aluminum electrolyzer refractory materials". Refractories and Industrial Ceramics 49, n. 5 (settembre 2008): 334–35. http://dx.doi.org/10.1007/s11148-009-9093-z.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

17

Antusch, Steffen, Jens Reiser, Jan Hoffmann e Alexandru Onea. "Refractory Materials for Energy Applications". Energy Technology 5, n. 7 (5 aprile 2017): 1064–70. http://dx.doi.org/10.1002/ente.201600571.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

18

Fleuriault, Camille, Joseph Grogan e Jesse White. "Refractory Materials for Metallurgical Uses". JOM 70, n. 11 (21 agosto 2018): 2420–21. http://dx.doi.org/10.1007/s11837-018-3096-5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

19

HIRAOKA, Yutaka. "Joining of Refractory Metals and Refractory Metal-Based Composite Materials". Journal of Smart Processing 4, n. 2 (2015): 73–78. http://dx.doi.org/10.7791/jspmee.4.73.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

20

Aksel'rod, L. M., e E. V. Panov. "Circular economy as applied to refractory materials." Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 80, n. 4 (20 maggio 2024): 104–13. http://dx.doi.org/10.32339/10.32339/0135-5910-2024-4-104-113.

Testo completo

Abstract (sommario):

The closed-loop economy concerning refractory materials is implemented through systematic involvement in post-operational usage in thermal, including metallurgical, units as secondary (by-product) raw materials. This is one of today's trends in resource and energy economics, reducing carbon footprint and CO2 emissions, decreasing waste with subsequent disposal in landfills. Purified scrap of refractory materials is used as supplementary materials in metallurgical processes, commonly referred to as scrap utilization when used as fluxes to adjust slag composition in metallurgical units, molded materials for welding in converters, refractory fillers in the production of unformed materi-als for sections lining working outside the aggressive influence of molten metal and slag, etc. For these purposes, the scrap is sorted into grades, crushed and screened, occasionally incorporating other products. Refractory scrap after ser-vice in metallurgical units usually has higher impurity content, higher porosity, and contains fragmented remnants of the refractory structure. Recycling refractory scrap may additionally involve technological methods for extracting impurities (enrichment) with subsequent use of the recyclate directly in refractory production, partially replacing primary raw materials. In this case, research work with involvement of qualified specialists and the entire body of knowledge in creating new refractory materials is necessary. Practice has shown that qualified involvement of recyclate in manufacturing processes of high-quality refractories is accompanied by solving non-standard tasks and requires a special approach, including the issue of removing introduced or formed foreign materials in refractory material during its operation. Enrichment is an effective direction for cleaning refractory scrap, extracting quality materials during processing of waste from mining enterprises, materials of technogenic origin to obtain recyclate of necessary quality. The enrichment technology is selected based on the set tasks. Recyclate quality for use alongside primary raw materials must guarantee refractory manufacturers meet the corresponding requirements of end-users. An original technology of recyclate enrichment during its selective grinding with product separation using air-gravitational and centrifugal-air classification has been developed

Gli stili APA, Harvard, Vancouver, ISO e altri

21

Aksel'rod, L. M., e E. V. Panov. "Circular economy as applied to refractory materials". Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 80, n. 4 (20 maggio 2024): 104–13. http://dx.doi.org/10.32339/0135-5910-2024-4-104-113.

Testo completo

Abstract (sommario):

The closed-loop economy concerning refractory materials is implemented through systematic involvement in post-operational usage in thermal, including metallurgical, units as secondary (by-product) raw materials. This is one of today's trends in resource and energy economics, reducing carbon footprint and CO2 emissions, decreasing waste with subsequent disposal in landfills. Purified scrap of refractory materials is used as supplementary materials in metallurgical processes, commonly referred to as scrap utilization when used as fluxes to adjust slag composition in metallurgical units, molded materials for welding in converters, refractory fillers in the production of unformed materi-als for sections lining working outside the aggressive influence of molten metal and slag, etc. For these purposes, the scrap is sorted into grades, crushed and screened, occasionally incorporating other products. Refractory scrap after ser-vice in metallurgical units usually has higher impurity content, higher porosity, and contains fragmented remnants of the refractory structure. Recycling refractory scrap may additionally involve technological methods for extracting impurities (enrichment) with subsequent use of the recyclate directly in refractory production, partially replacing primary raw materials. In this case, research work with involvement of qualified specialists and the entire body of knowledge in creating new refractory materials is necessary. Practice has shown that qualified involvement of recyclate in manufacturing processes of high-quality refractories is accompanied by solving non-standard tasks and requires a special approach, including the issue of removing introduced or formed foreign materials in refractory material during its operation. Enrichment is an effective direction for cleaning refractory scrap, extracting quality materials during processing of waste from mining enterprises, materials of technogenic origin to obtain recyclate of necessary quality. The enrichment technology is selected based on the set tasks. Recyclate quality for use alongside primary raw materials must guarantee refractory manufacturers meet the corresponding requirements of end-users. An original technology of recyclate enrichment during its selective grinding with product separation using air-gravitational and centrifugal-air classification has been developed

Gli stili APA, Harvard, Vancouver, ISO e altri

22

Balaev, А. D., e Ya M. Pitak. "Thermal insulation refractory materials and products (review)". Scientific research on refractories and technical ceramics, n. 122-123 (27 dicembre 2023): 81–92. http://dx.doi.org/10.35857/2663-3566.122-123.09.

Testo completo

Abstract (sommario):

A literature review of manufacturing technologies, properties, and applications of thermal insulation refractory materials and products was carried out. It was shown that thermal insulation refractory materials are relevant for modern industry and science, as they contribute to solving many problems related to improving the efficiency, safety, and ecology of various technological processes. They are a promising object of research and development, as they are constantly being adapted to different operating conditions. Various methods of porosization (swelling (foaming); evaporation or burning of the poreforming agent; loose packing; contact monolithization; bulk monolithization; and creation of combined structures) were shown to produce lightweight insulating refractories. A separate part of the review was devoted to fiber refractory materials and products as the most modern and relevant materials. The technologies for obtaining both refractory glass fibers and polycrystalline fibers, their properties, and applications were described. Based on the literature review on the classification, manufacturing technologies, and applications of thermal insulation refractory materials and products, the main directions of further research in the field of refractory fiber thermal insulation were identified.

Gli stili APA, Harvard, Vancouver, ISO e altri

23

Mansurov, Zulkhair A., e Sergey M. Fomenko. "Carbonaceous Refractory Materials on SHS-Technology". Advances in Science and Technology 88 (ottobre 2014): 94–103. http://dx.doi.org/10.4028/www.scientific.net/ast.88.94.

Testo completo

Abstract (sommario):

This study contains results of carbonaceous SHS-refractory materials application for binding of the graphite products and melting of metals in the induction furnaces. The opportunity of producing strong graphite-graphite bond up to 5 MPa by means of the carbonaceous refractory material that demonstrated high chemical stability in the aggressive liquid metals and alloys environment has been shown. The results of the industrial tests of melting crucibles made of carbonaceous SHS-refractory materials have been presented in the case of aluminium melting. It has been shown that such crucibles stability is 5-6 times higher than that of standard graphite crucibles in aluminium melting conditions. The obtained research results testify that developed carbonaceous material is applied for lining of the induction furnace of melting unit is allow to increase the number of nonferrous metals (bronze) melting cycles from 5 to 6 times in comparison with the traditional graphite crucible melting. High chemical stability of the material to oxidizing environment as well as to metal melts is provided by formation of high-melting compounds in the carbonaceous exothermic systems during SHS-process.

Gli stili APA, Harvard, Vancouver, ISO e altri

24

Niedzialek, Scott E., Gregory C. Stangle e Yoshinari Kaieda. "Combustion-synthesized functionally gradient refractory materials". Journal of Materials Research 8, n. 8 (agosto 1993): 2026–34. http://dx.doi.org/10.1557/jmr.1993.2026.

Testo completo

Abstract (sommario):

Functionally Gradient Materials (FGM's) are soon to be used in a variety of important commercial applications; joining and thermal barrier coatings are two of the most widely studied. FGM's of the TiC/NiAl and the TiC/Ni3Al systems were fabricated using a one-step, self-propagating high-temperature synthesis (SHS) and densification method. It was observed that ignition of the starting mixture for these two systems was affected by the initial sample temperature and the external pressure that was applied to the sample during the ignition stage. Quality of the final product (e.g., porosity, grain size, cracking and microcracking, etc.) depends on a number of factors during this one-step operation. Reaction temperature control is important and is necessary to minimize residual porosity of the final product. Particle size of reactant powders, as well as applied pressure, also has an effect on the resulting microstructure. If careful reaction temperature control is achieved, along with optimum reactant powder size and applied pressure, an FGM of minimal porosity is obtained without residual macrocracks. Further, this method can easily be used to fabricate an FGM with a highly precise composition and material properties gradient. Finally, this process results in FGM's of similar quality when compared to those prepared by existing fabrication methods at only a fraction of the cost. Most importantly, it is expected that this process can be scaled up with relative ease.

Gli stili APA, Harvard, Vancouver, ISO e altri

25

Goberis, S. "Thermal Stability of Unshaped Refractory Materials". Refractories and Industrial Ceramics 44, n. 6 (novembre 2003): 427–30. http://dx.doi.org/10.1023/b:refr.0000016783.12573.36.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

26

Rutman, D. S., E. V. Belyaeva e V. I. Sizov. "Prospective refractory materials for vacuum electrometallurgy". Refractories 28, n. 7-8 (luglio 1987): 357–61. http://dx.doi.org/10.1007/bf01400023.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

27

Yatsenko, N. D., e E. O. Rat’kova. "Refractory Ceramics Based on Local Materials". Glass and Ceramics 62, n. 1-2 (gennaio 2005): 16–18. http://dx.doi.org/10.1007/s10717-005-0021-5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

28

Chen, Xin, e Dayakar Penumadu. "Characterizing microstructure of refractory porous materials". Journal of Materials Science 41, n. 11 (12 aprile 2006): 3403–15. http://dx.doi.org/10.1007/s10853-005-5342-9.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

29

Olander, D. R. "Laser-pulse-vaporization of refractory materials". Pure and Applied Chemistry 62, n. 1 (1 gennaio 1990): 123–38. http://dx.doi.org/10.1351/pac199062010123.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

30

Palčo, Štefan, e Frantisek Tomšů. "Refractory Materials, Furnaces and Thermal Insulations". Interceram - International Ceramic Review 67, n. 4 (luglio 2018): 12–15. http://dx.doi.org/10.1007/s42411-018-0025-0.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

31

Palčo, Štefan, e Frantisek Tomšů. "Refractory Materials, Furnaces and Thermal Insulations". Interceram - International Ceramic Review 67, S1 (settembre 2018): 18–21. http://dx.doi.org/10.1007/s42411-018-0042-z.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

32

Cölle, D., M. Jung, H. Gross e A. Belyanin. "Cement-free spinel-based refractory materials". Refractories and Industrial Ceramics 46, n. 4 (luglio 2005): 256–59. http://dx.doi.org/10.1007/s11148-006-0020-2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

33

Tabereaux, Alton T. "Reviewing advances in cathode refractory materials". JOM 44, n. 11 (novembre 1992): 20–26. http://dx.doi.org/10.1007/bf03222837.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

34

Boccaccini, D. N., M. Cannio, T. D. Volkov-Husoviæ, E. Kamseu, M. Romagnoli, P. Veronesi, C. Leonelli, I. Dlouhy e A. R. Boccaccini. "Service life prediction for refractory materials". Journal of Materials Science 43, n. 12 (giugno 2008): 4079–90. http://dx.doi.org/10.1007/s10853-007-2315-1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

35

Zemlyanoi, K. G., e A. R. Khafizova. "Synthetic raw materials - possibility to increase refractory materials resistance". IOP Conference Series: Materials Science and Engineering 966 (14 novembre 2020): 012045. http://dx.doi.org/10.1088/1757-899x/966/1/012045.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

36

Il'in, G. I. "The recycling materials using in the refractory production". NOVYE OGNEUPORY (NEW REFRACTORIES), n. 7 (25 dicembre 2018): 13–16. http://dx.doi.org/10.17073/1683-4518-2018-7-13-16.

Testo completo

Abstract (sommario):

The investigating results are given for the ferrouschromium slags using as the refractory materials to prepare the refractory concretes. The temperature range of their application was defned. It was established that the magnesia oxide addition considerably reduced the Chromium VI formation during service in composition of the refractory materials manufactured on base of the ferrous-chromium slags. Ref. 5. Tab. 4.

Gli stili APA, Harvard, Vancouver, ISO e altri

37

Klyushnikov, A. M., E. N. Selivanov, K. V. Pikulin, V. V. Belyaev, A. B. Lebed' e L. Yu Udoeva. "The periclase-chromite refractory decomposition by the action of the pulverized coal and gas medium in course of copper-sulfide raw materials processing". NOVYE OGNEUPORY (NEW REFRACTORIES), n. 12 (25 dicembre 2018): 31–36. http://dx.doi.org/10.17073/1683-4518-2018-12-31-36.

Testo completo

Abstract (sommario):

The investigating results are given for the periclase-chromite refractories' composition and structure which are in contact with the pulverized coal and gas medium in the coppersulfide smelting furnaces. The high-temperature burnt copper concentrate and the sulfur dioxide gas suspensions combined action changes the surface and deep refractories layers chemical composition, with that the impurities content reach the value in weight percent: Fe 54,0, Cu 7,2, Zn 6,4, S 1,8. The refractory's surface layer saturation with the iron and non-ferrous metals oxides decreases the porosity and gives rise to low-melting compositions and eutectics. The refractory decomposition is induced by the shelling of the refractory surface layers with the filled porous taking place in course of the heating-cooling cycling because of the phase's thermal linear expansion coefficients. When the spent refractory disposal, it is feasible to separate mechanically the surface layer for the non-ferrous metals extracting, the rest part can be used for obtaining the refractory powder of various purpose.

Gli stili APA, Harvard, Vancouver, ISO e altri

38

Olasupo, O. A., e J. O. Borode. "Development of Insulating Refractory Ramming Mass from Some Nigerian Refractory Raw Materials". Journal of Minerals and Materials Characterization and Engineering 08, n. 09 (2009): 667–78. http://dx.doi.org/10.4236/jmmce.2009.89058.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

39

Šolc, Marek, e Štefan Markulik. "The Effect of Corrosive Medium CaCl₂ on the Quality of Shaped Refractory Materials". Advanced Materials Research 849 (novembre 2013): 26–31. http://dx.doi.org/10.4028/www.scientific.net/amr.849.26.

Testo completo

Abstract (sommario):

The article describes the quality refractory materials, the main requirements for quality of lining bricks and chemical and physical wear factors, which influence the quality of refractory materials. Another part of the article describes the corrosive effect of medium CaCl2 for refractory materials. The results of the experimental part are evaluated macroscopic, microscopic analysis, and then was defined the penetration of elements Ca and Cl into the refractory materials. At the end of the article, is discussion to the results of impact melt CaCl2 for refractory materials.

Gli stili APA, Harvard, Vancouver, ISO e altri

40

Lisovsky, Anatoly F. "Deconsolidation of Polycrystalline Skeletons in Sintered Composite Materials". Materials Science Forum 624 (giugno 2009): 43–56. http://dx.doi.org/10.4028/www.scientific.net/msf.624.43.

Testo completo

Abstract (sommario):

The present review covers the deconsolidation aspects of refractory polycrystalline skeletons for composites based on refractory particles with a metal binder. The thermodynamics of the process has been highlighted. The criterion for deconsolidation is established and the mechanism has been described.

Gli stili APA, Harvard, Vancouver, ISO e altri

41

Zabolotskii, A. V., e V. T. Khadyev. "Nanomaterials in the production of refractory materials". Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 76, n. 8 (3 settembre 2020): 873–77. http://dx.doi.org/10.32339/0135-5910-2020-8-873-875.

Testo completo

Abstract (sommario):

On June 17, 2020 the International Scientific and Practical Online Conference “Current Trends in Application of Nano-Materials in Production of Refractories” was held. The conference was organized by “Magnezit” Group in cooperation with Wuhan University of Science and Technology, Fund of infrastructure and educational programs of ROSNANO group and National Research Technological University MISiS (Moscow). Leading specialists of practical work and experts from universities of Russia, China, Lithuania, the Netherlands and the USA delivered reports. Results of studies obtained in research laboratories and at industrial sites were presented by authors of 9 reports. The conference brought together about 300 participants, at that more than 60 participants had a chance to take part in the discussions and put questions to the speakers, and 200 listeners were observing the event by on-line transmission.

Gli stili APA, Harvard, Vancouver, ISO e altri

42

Young, D. J. "Gas Corrosion of High Performance Refractory Materials". Materials Science Forum 34-36 (gennaio 1991): 651–55. http://dx.doi.org/10.4028/www.scientific.net/msf.34-36.651.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

43

Mikhailova, T. V. "Occupational health at enterprises producing refractory materials". Ukrainian Journal of Occupational Health 2005, n. 2 (30 giugno 2005): 71–79. http://dx.doi.org/10.33573/ujoh2005.02.071.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

44

Kakroudi, Mahdi Ghassemi, e Shahin Khameneh Asl. "High Temperature Elastic Properties of Refractory Materials". Materials Science Forum 673 (gennaio 2011): 59–64. http://dx.doi.org/10.4028/www.scientific.net/msf.673.59.

Testo completo

Abstract (sommario):

A pulse-echo technique, based on ultrasonic "long-bar" mode (LBM) velocity measurements, working up to 1700°C is described. Magnetostrictive transducers and ultrasonic lines used in a 40-350 kHz frequency range are detailed. The conditions of choice of fundamental parameters (frequency, line geometry, sample size) are discussed in relation with the nature and the microstructure of the materials under test. This technique can be used to study the variations of elastic moduli of materials at high temperature.

Gli stili APA, Harvard, Vancouver, ISO e altri

45

Yao, Yu, Jin Zhou, Zhengqi Liu, Xiaoshan Liu, Guolan Fu e Guiqiang Liu. "Refractory materials and plasmonics based perfect absorbers". Nanotechnology 32, n. 13 (6 gennaio 2021): 132002. http://dx.doi.org/10.1088/1361-6528/abd275.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

46

Rieth, Michael, e Andreas Hoffmann. "Impact Bending Tests on Selected Refractory Materials". Advanced Materials Research 59 (dicembre 2008): 101–4. http://dx.doi.org/10.4028/www.scientific.net/amr.59.101.

Testo completo

Abstract (sommario):

The possible use of tungsten alloys as structural materials in future fusion reactor divertors strongly depend on their ductile-to-brittle transition temperature (DBTT). The present paper gives an overview on different rod and plate materials fabricated by PLANSEE. It is demonstrated that DBTT is clearly improved compared to commercially available standard materials. Moreover, the significant impact of the microstructure on fracture mode and on toughness is discussed in detail.

Gli stili APA, Harvard, Vancouver, ISO e altri

47

Skurikhin, V. V. "New Refractory Materials and Products for Metallurgy". Metallurgist 48, n. 5/6 (maggio 2004): 281–85. http://dx.doi.org/10.1023/b:mell.0000042829.08401.14.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

48

Herique, A., J. Gilchrist, W. Kofman e J. Klinger. "Dielectric properties of comet analog refractory materials". Planetary and Space Science 50, n. 9 (agosto 2002): 857–63. http://dx.doi.org/10.1016/s0032-0633(02)00060-0.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

49

Brookes, Kenneth JA. "Focus on hard and refractory materials advances". Metal Powder Report 56, n. 9 (settembre 2001): 14–19. http://dx.doi.org/10.1016/s0026-0657(01)80512-9.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

50

Bernard, Claude, e R. Madar. "Thermodynamic analysis and deposition of refractory materials". Surface and Coatings Technology 49, n. 1-3 (dicembre 1991): 208–14. http://dx.doi.org/10.1016/0257-8972(91)90057-4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!