Letteratura scientifica selezionata sul tema "Reconfigurable machines tools (RMT)"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Reconfigurable machines tools (RMT)".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Reconfigurable machines tools (RMT)":
McLaren, Ian, e I. Gorlach. "Development of a Tool Changer for a Reconfigurable Machine Tool". Applied Mechanics and Materials 798 (ottobre 2015): 324–28. http://dx.doi.org/10.4028/www.scientific.net/amm.798.324.
Katz, Reuven, John Yook e Yoram Koren. "Control of a Non-Orthogonal Reconfigurable Machine Tool". Journal of Dynamic Systems, Measurement, and Control 126, n. 2 (1 giugno 2004): 397–405. http://dx.doi.org/10.1115/1.1771692.
Zhou, Feng Xu, Ai Ping Li, Nan Xie e Li Yun Xu. "Reconstruction Method of Reconfigurable Machine Tool Based on Task Polymorphism". Advanced Materials Research 971-973 (giugno 2014): 1001–4. http://dx.doi.org/10.4028/www.scientific.net/amr.971-973.1001.
Singh, Ashutosh, Mohammad Asjad, Piyush Gupta e Jahangir Quamar. "An Approach to Develop Shaper Cum Slotter Mechanism: A Reconfigurable Machine Tool". South Asian Journal of Business and Management Cases 8, n. 2 (8 aprile 2019): 195–206. http://dx.doi.org/10.1177/2277977919833765.
Sibanda, Vennan, Khumbulani Mpofu, John Trimble e Mufaro Kanganga. "Development of part families for a reconfigurable machine". Journal of Engineering, Design and Technology 18, n. 5 (9 dicembre 2019): 991–1014. http://dx.doi.org/10.1108/jedt-06-2019-0159.
Gopalakrishnan,, V., D. Fedewa,, M. G. Mehrabi,, S. Kota, and e N. Orlandea. "Parallel Structures and Their Applications in Reconfigurable Machining Systems". Journal of Manufacturing Science and Engineering 124, n. 2 (29 aprile 2002): 483–85. http://dx.doi.org/10.1115/1.1459468.
Wang, Yongquan, Guangpeng Zhang, Jiali Wang, Pan Liu e Nina Wang. "Reconfigurable Machine Tool Design for Box-Type Part Families". Machines 9, n. 8 (29 luglio 2021): 148. http://dx.doi.org/10.3390/machines9080148.
Liu, Ping, Qiang Zhang e Jürgen Pannek. "Development of Operator Theory in the Capacity Adjustment of Job Shop Manufacturing Systems". Applied Sciences 9, n. 11 (31 maggio 2019): 2249. http://dx.doi.org/10.3390/app9112249.
Singh, Ashutosh, Mohammad Asjad e Piyush Gupta. "Enhancing the Reconfigurability Issues of Machine Tool for Reconfigurable Manufacturing System (RMS)". Journal of Industrial Integration and Management 05, n. 03 (9 luglio 2020): 349–463. http://dx.doi.org/10.1142/s2424862220500037.
KOVALEVSKYI, S. V., O. S. KOVALEVSKA e V. M. OSIPOV. "CONCEPT OF THE MULTYNOMENCLATURE RECONFIGURABLE MACHINE REPAIR CLUSTER". Economic innovations 20, n. 4(69) (20 dicembre 2018): 91–100. http://dx.doi.org/10.31520/ei.2018.20.4(69).91-100.
Tesi sul tema "Reconfigurable machines tools (RMT)":
Ameer, Muhammad. "Integrated and multi-criteria approaches for process plan generation in reconfigurable manufacturing systems with consideration of system capabilities and product constraints". Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0242.
Modern manufacturing systems are going through a paradigm shift where the focus is on the integrating the digital technologies in the production systems to address the challenge of uncertain market demands. Manufacturing systems needs certain amount responsiveness to address these uncertainties by adapting accordingly, and require more changeability at physical as well as logical levels. For this purpose, modern-day manufacturing systems are designed with dynamic resource capabilities, with modular components, so that they can provide the required amount of reconfigurability. From the perspective of "industry 4.0", reconfigurability is vital for the effective adaptation of manufacturing systems in a complex environment. Reconfigurability provides the quick adaptation of these systems along with quick responsiveness towards socio-techno-economic competitiveness. The objective is to respond to modern-day challenges (both external and internal), i.e. mass customization, globalization, product variety management, system reconfiguration management, and reducing the lead time.In this thesis, the design problem of reconfigurable manufacturing systems (RMS) is considered which meets the aforementioned requirements. The goal is to design a responsive system based on two key features modularity and reconfigurability. We study the RMS design problem as, the development of a process plan for a particular part of the part family along with the selection of the system's dynamic resource capabilities to perform that part. This work is divided into three parts: (1) Co-generation of process and setup plan for a part in the reconfigurable environment. The main objective is to develop a new approach to jointly consider the setup and process plan constraints, with consideration of relationships between the operations. (2) Minimisation of reconfiguration effort in process design. We propose a novel performance index of the effort generated by the machines and fixtures reconfiguration, and part transfer. The objective is to ensure better responsiveness and high performance of the designed process plan. (3) Maximisation the utilization of dynamic resource capabilities of RMS design. We consider a RMS design problem for machine selection, where selection of different types of reconfigurable machine tools (RMTs) are carried out for performing the process plan of considered part
Collins, James. "Automatic calibration of a tool-changing unit for modular reconfigurable machines". Thesis, 2011. http://hdl.handle.net/10413/8859.
Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2011.
Libri sul tema "Reconfigurable machines tools (RMT)":
Dai, Jian S. Advances in Reconfigurable Mechanisms and Robots I. London: Springer London, 2012.
Kong, Xianwen, Matteo Zoppi e Jian S. Dai. Advances in Reconfigurable Mechanisms and Robots I. Springer London, Limited, 2016.
Capitoli di libri sul tema "Reconfigurable machines tools (RMT)":
Kimmig, Andreas, Jieyang Peng e Jivka Ovtcharova. "Capacity Building for Digital Work – A Case from Sino-German Cooperation". In New Digital Work, 260–75. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-26490-0_15.
Atti di convegni sul tema "Reconfigurable machines tools (RMT)":
Katz, Reuven, e Yoram Koren. "Reconfigurable Machines". In ASME 2008 9th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2008. http://dx.doi.org/10.1115/esda2008-59056.
Ersal, Tulga, Jeffrey L. Stein e Loucas S. Louca. "A Modular Modeling Approach for the Design of Reconfigurable Machine Tools". In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59806.
Huang, Sihan, Cong Zeng, Guoxin Wang e Yan Yan. "Optimal Reconfiguration Path Decision Method for One RMT System". In ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/detc2019-98234.
Gopalakrishnan, Venkat, e Sridhar Kota. "A Parallely Actuated Work Support Module for Reconfigurable Machining Systems". In ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/mech-5959.
Moon, Yong-Mo, e Sridhar Kota. "Generalized Kinematic Modeling Method for Reconfigurable Machine Tools". In ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/mech-5946.
Yigit, Ahmet S., e A. Galip Ulsoy. "Application of Nonlinear Receptance Coupling to Dynamic Stiffness Evaluation for Reconfigurable Machine Tools". In ASME 2001 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/detc2001/vib-21397.
Spicer, J. Patrick, e Hector J. Carlo. "Simultaneous Scalable-Reconfigurable Manufacturing System Design and Inventory Control Policy Decision Making". In ASME 2006 International Manufacturing Science and Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/msec2006-21083.
Moon, Yong-Mo, e Sridhar Kota. "Synthesis of Reconfigurable Machine Tools With Screw Theory". In ASME 2000 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/detc2000/mech-14066.
Kooli, Maha, Pascal Benoit, Giorgio Di Natale, Lionel Torres e Volkmar Sieh. "Fault injection tools based on Virtual Machines". In 2014 9th International Symposium on Reconfigurable and Communication-Centric Systems-on-Chip (ReCoSoC). IEEE, 2014. http://dx.doi.org/10.1109/recosoc.2014.6861351.
Ling, Catherine, Derek Yip-Hoi e Yoram Koren. "Hole Pattern Identification in Gang Spindle Head Design for Reconfigurable Machining Systems". In ASME 2000 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/detc2000/dac-14279.