Accedi

Bibliografie tematiche / Production / Articoli di riviste

Articoli di riviste sul tema "Production"

Segui questo link per vedere altri tipi di pubblicazioni sul tema: Production.

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 25 luglio 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Production".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.

1

Alla, Sedelnikova. "ENHANCING ENTERPRISE PRODUCTION MANAGEMENT SYSTEM THROUGH LEAN PRODUCTION PRINCIPLES". International Journal of Economics Finance & Management Science 08, n. 07 (11 luglio 2023): 09–15. http://dx.doi.org/10.55640/ijefms-9131.

Testo completo

Abstract (sommario):

Efficient production management is essential for enterprises to maintain competitiveness and optimize resource utilization. Lean production principles have proven to be effective in streamlining operations, eliminating waste, and improving overall productivity. This study aims to enhance the enterprise production management system by implementing lean production principles. Through a systematic analysis of existing production processes, waste identification, and the application of lean tools and techniques, the study proposes strategies for process optimization, inventory management, quality improvement, and workforce engagement. The findings highlight the benefits of incorporating lean production principles into the enterprise production management system, leading to increased efficiency, cost reduction, and enhanced customer satisfaction.

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Rebenko, V. I. "Technological basis for process control of production of poultry production". Naukovij žurnal «Tehnìka ta energetika» 11, n. 1 (30 gennaio 2020): 61–66. http://dx.doi.org/10.31548/machenergy2020.01.061.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

YUNIAWAN, Dani, e Teruaki ITO. "S141012 Simulation Study on Master Production Schedule for Meatball Production". Proceedings of Mechanical Engineering Congress, Japan 2012 (2012): _S141012–1—_S141012–5. http://dx.doi.org/10.1299/jsmemecj.2012._s141012-1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

RUBANKA, Mykola, Volodymyr DVORZHAK, Alla RUBANKA, Oleh POLISHCHUK e Serhiy HORIASHCHENKO. "INNOVATIVE TECHNOLOGIES IN THE PRODUCTION OF SEWING PRODUCTS: CUTTING PRODUCTION". Herald of Khmelnytskyi National University. Technical sciences 315, n. 6(1) (29 dicembre 2022): 188–97. http://dx.doi.org/10.31891/2307-5732-2022-315-6-188-197.

Testo completo

Abstract (sommario):

The article considers the technological process of production of the cutting department of a sewing enterprise and the typical equipment used during such a process. It is revealed that the increase in the range of sewing products, the appearance of new materials, the speed of changing models, methods of processing, etc., necessitates a systematic search for rational and effective solutions for the technological process of production, including through the introduction of modern innovative equipment. The most used standard equipment of the cutting department of a sewing enterprise has been analyzed. The main requirements for the equipment involved in the technological process of production of the cutting department of a sewing enterprise have been determined. Also, the ways of possible improvement of the cutting department of a sewing enterprise have been outlined. The object of the research is a typical cutting department of a Ukrainian sewing enterprise, i.e. the technological process of production and the equipment used during such process. The method of system analysis is used. Theoretical studies are based on the main provisions of light industry production technologies. A generalized classification scheme of the standard equipment of the cutting department of a sewing enterprise has been developed, which can be used at light industry enterprises, in particular the cutting department of a sewing enterprise, when choosing energy-efficient and high-tech equipment. Also, the main problems that need to be solved for the successful development of an average sewing enterprise are outlined. The results of the study can be used in the design of new and modernization of existing cutting departments of sewing enterprises.

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Šprysl, M., J. Čítek e R. Stupka. "Interaction of selected production indicators of the economics of pork production". Czech Journal of Animal Science 55, No. 1 (25 gennaio 2010): 1–10. http://dx.doi.org/10.17221/1705-cjas.

Testo completo

Abstract (sommario):

Estimates of the effects influencing the economics of pig production are of primary importance for breeders. For this purpose, costs, revenues and profitability were determined on the basis of individual parameters of the efficiency of tested pigs and of average commodity prices. The calculation was the result of the efficiency of actual animals and of the average and simulated prices of inputs received by producers in large-scale production operations. 136 animals, 64 of crossbred combinations (LWs × D) × (LW<sub>D</sub> × L) and 72 of PN × (LW<sub>D</sub> × L) were used. The total cost of 1 pig represented the costs per weaned piglet, feed and other costs; the revenues represented the actual price of a pig at slaughter. Multivariable hierarchical models were constructed to assess the relationships between the following factors: crossbred combination, nutrition and sex, ADG, number of piglets bred, CFM price and carcass price with the outcome variables: costs, revenues and profitability. The results demonstrated that the total cost of fattening pig is considerably influenced by the price of a piglet and feed, not by the price of the carcass and the growth intensity. There was no proof of a relationship between the price of a pig and reproduction and/or the price of feed. Profitability is significantly influenced by the reproduction rate, price of feed, growth intensity and revenues. The results also showed that the intensity of nutrition and the sex considerably influence the total cost of 1 fattened pig, which represents an increase in the total cost by 3.80 € in the application of <I>ad libitum</I> feeding techniques, and 5.39 €/pc in the fattening of barrows. The choice of a suitable combination represents a decrease in the total cost by 1.49% and an increase in revenues by 2.93%. Profitability is significantly associated with the intensity of nutrition, sex and breed. With unrestricted feeding it is reduced by 4.1%, for barrows by 6.6%, and in the use of four-breed combinations of crossbreds it increases by 4.13%.

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Tvrdoň, J. "Conception of the model of agriculture with production and non-production function". Agricultural Economics (Zemědělská ekonomika) 49, No. 5 (1 marzo 2012): 208–12. http://dx.doi.org/10.17221/5392-agricecon.

Testo completo

Abstract (sommario):

The article deals with an optimisation of the relation between production and non-production functions of agriculture. In the model, a two-product production process is presupposed, the result of which is agricultural production and a complex of other effects arising in agriculture. To obtain them, two aggregated inputs – capital and labour – are used. To maximise the summary economic result, the procedure of derivation of the optimal extent of both production processes proceeding as well as non-production effects in minimisation of both inputs in their summary is worked out in the article. In the article, the knowledge of the research gained in framework of solution of the institutional research intention MSM: 411100013 “Efficient integration of the Czech agrarian sector into the frame of the European structures – presumption of sustainable development” is included.

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Altuner, Elif Esra. "Production of Nano Creams". Karaelmas Science and Engineering Journal 4, n. 1 (20 marzo 2014): 52–57. http://dx.doi.org/10.7212/zkufbd.v4i1.118.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Vaněček, D., e D. Kaláb. "Logistics in agricultural production". Agricultural Economics (Zemědělská ekonomika) 49, No. 9 (2 marzo 2012): 439–43. http://dx.doi.org/10.17221/5429-agricecon.

Testo completo

Abstract (sommario):

In spite that the great importance of logistics in industry, business and other branches is generally acknowledged, this problem is not systematically investigated in agriculture. As a presumption of a detailed analysis, the knowledge of the volume and structure of the material flow is necessary. The authors have proposed their own methodological procedure which issues from technological indicators, published by the Ministry of Agriculture CR for individual plants and categories of animals and which makes possible a further classification of these data for enterprises with different level of farming. These published standards of the Ministry serve as basic stones and by means of their combination, the volume of material flow and its structure during one year periods is possible to calculate. The advantage of the proposed method is a fast finding out of necessary data and possibility of taking into account some specific conditions of the investigated enterprises.

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Mezhybrotskyi, Vasyl, Volodymyr Starchevskyi e Liliya Oliynyk. "Methods of Dithiodimorpholine Production". Chemistry & Chemical Technology 7, n. 2 (10 giugno 2013): 213–16. http://dx.doi.org/10.23939/chcht07.02.213.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Dr P.Arun, Dr P. Arun, e Dr S. Mahalingam Dr S. Mahalingam. "Food Production in India". International Journal of Scientific Research 3, n. 6 (1 giugno 2012): 104–5. http://dx.doi.org/10.15373/22778179/june2014/38.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

11

Tashakori, Laleh, e Abouzar Arabsorkhi. "A Survey on Marketing Characteristics and Production System Strategies-Case Study: Cans Production". International Journal of Engineering Research 4, n. 9 (1 settembre 2015): 510–17. http://dx.doi.org/10.17950/ijer/v4s9/908.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

12

Chen, Miao-Sheng, e Fu-Chien Tsai. "THE OPTIMAL PRODUCTION PLAN UNDER LIMITED PRODUCTION CAPACITY AT ANY POINT IN TIME". Journal of the Operations Research Society of Japan 51, n. 1 (2008): 81–94. http://dx.doi.org/10.15807/jorsj.51.81.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

13

He, Xin-Feng, Su Wu e Quan-Lin Li. "Production variability of production lines". International Journal of Production Economics 107, n. 1 (maggio 2007): 78–87. http://dx.doi.org/10.1016/j.ijpe.2006.05.014.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

14

PRACHE, S., e M. THERIEZ. "Production d’agneaux à l’herbe". INRAE Productions Animales 1, n. 1 (10 dicembre 1988): 25–33. http://dx.doi.org/10.20870/productions-animales.1988.1.1.4432.

Testo completo

Abstract (sommario):

La production à l’herbe concerne environ 60 % des agneaux en France ; elle est difficile à bien maîtriser, et les résultats techniques sont très variables entre exploitations. Nous avons présenté les facteurs qui permettent de réussir ce type d’agneau. Nous avons rappelé ceux qui conditionnent l’ingestion de l’animal au pâturage, puis ceux qui permettent d’optimiser la conduite du troupeau et la valorisation de l’herbe au cours des différentes phases de la production. Jusqu’à l’âge de 8-10 semaines, la quantité d’énergie ingérée par l’agneau provient surtout du lait qu’il consomme, et il ne peut compenser que très partiellement un faible apport de lait. L’agneau doit être sevré d’autant plus jeune que sa croissance est faible sous la mère ; l’âge minimum à respecter est de 6 semaines si l’agneau est engraissé en bergerie et de 8 semaines s’il est engraissé à l’herbe, à condition qu’il pèse alors le triple de son poids à la naissance. Le choix du mode de finition après sevrage dépend de la quantité et de la qualité d’herbe disponible à cette époque, et aussi du type d’agneau. L’apport de concentré au pâturage est surtout efficace pour de faibles disponibilités en herbe, et doit d’abord être réservé aux agneaux qui reçoivent peu de lait. La maîtrise du parasitisme est un élément clé de la réussite de cette production.

Gli stili APA, Harvard, Vancouver, ISO e altri

15

Letarte, Yvon, Hans J. Hansen, Morten Søndergaard e Bernadette Pinel-Alloul. "Production and abundance of different bacterial sizeclasses: relationships with primary production and chlorophyll concentration". Archiv für Hydrobiologie 126, n. 1 (12 novembre 1992): 15–26. http://dx.doi.org/10.1127/archiv-hydrobiol/126/1992/15.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

16

Freyssenet, Michel. "'Reflective Production': An Alternative to Mass Production and Lean Production?" Economic and Industrial Democracy 19, n. 1 (febbraio 1998): 91–117. http://dx.doi.org/10.1177/0143831x98191005.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

17

Mishra, Prabhat Kumar, e Firoz Naem Khan. "Biomass Production of Paecilomyces Vairoti". Indian Journal of Applied Research 4, n. 4 (1 ottobre 2011): 497–99. http://dx.doi.org/10.15373/2249555x/apr2014/157.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

18

Koščak Kolin, Sonja. "BOOK REVIEW "PETROLEUM PRODUCTION ENGINEERING"". Rudarsko-geološko-naftni zbornik 31, n. 1 (1 settembre 2016): 87–88. http://dx.doi.org/10.17794/rgn.2016.3.7.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

19

ZF, Fawzy. "Compost Production for Soil Nutrition". Open Access Journal of Waste Management & Xenobiotics 5, n. 2 (5 agosto 2022): 1–5. http://dx.doi.org/10.23880/oajwx-16000173.

Testo completo

Abstract (sommario):

One of the biggest problems fans face is maintaining soil fertility. The constant use of chemical fertilizers is also harmful. Therefore, a supplemental dose of compost is necessary to improve soil fertility. Organic fertilizers like compost make better use of all farm and animal waste and convert nutrients into an easily available form, increasing soil fertility. Compost is the product of an aerobic process during which microorganisms break down organic matter into a stable amendment to improve soil quality and fertility. During the composting process, microorganisms use organic matter as a food source, and produce heat, carbon dioxide, water vapor and humus as a result of their vigorous growth and activity. When applied to and mixed in soil, humus can promote good soil structure, improve water and nutrient holding capacity, and help control erosion. Humus makes up approximately 60 per cent of the final compost.

Gli stili APA, Harvard, Vancouver, ISO e altri

20

BENEA, Bogdan Cornel. "BIODIESEL PRODUCTION USING SOLAR ENERGY". SCIENTIFIC RESEARCH AND EDUCATION IN THE AIR FORCE 19, n. 1 (31 luglio 2017): 253–56. http://dx.doi.org/10.19062/2247-3173.2017.19.1.28.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

21

Faqir, Yahya, Jiahua Ma e Yunlong Chai. "Chitosan in modern agriculture production". Plant, Soil and Environment 67, No. 12 (10 dicembre 2021): 679–99. http://dx.doi.org/10.17221/332/2021-pse.

Testo completo

Abstract (sommario):

In the perspective of return to nature, using scientific and technical progress for improved living standards, people began to search for solutions to alleviate environmental pollution. Researchers intend to make clean, affordable products that are gentle yet effective. Chitosan derived from the exoskeleton of crustaceans, cuticles of insects, cell walls of fungi, and some algae are renowned for many decades to exhibit biotic properties, especially anti-microbial characteristics. Here we review each ingredient for sourcing organic chitosan, with clean raw materials that can make pure, rich, and powerful products working naturally. Our study elaborates advances and utilisation of chitosan for industrial control-release fertilisers by physical, chemical, and multifaceted formulations such as water-retaining super absorbent, polyacrylic acid, and resins. Plant growth-promoting properties of chitosan as a growth regulator, pest/disease resistance, signalling regulation, effect on nuclear deformation, and apoptosis. Chitosan can improve the plant defence mechanism by stimulating photochemistry and enzymes related to photosynthesis. Furthermore, electrophysiological modification induced by chitosan can practically enable it to be utilised as a herbicide. Chitosan has an excellent role in improving soil fertility and plant growth as well as plant growth promoters. It is concluded, chitosan can play a key role in modern agriculture production and could be a valuable source promoting agricultural ecosystem sustainability. Future suggestions will be based on current achievements and also notable gaps. In addition, chitosan has a huge contribution to reducing fertilisers pollution, managing agricultural pests and pathogens in modern-day agriculture.

Gli stili APA, Harvard, Vancouver, ISO e altri

22

Bozkurt, İbrahim, e M. Veysel Kaya. "Agricultural production index: International comparison". Agricultural Economics (Zemědělská ekonomika) 67, No. 6 (25 giugno 2021): 236–45. http://dx.doi.org/10.17221/29/2021-agricecon.

Testo completo

Abstract (sommario):

This paper investigates the influences of macroeconomic policies on agricultural production and other factors affecting it, based on panel data in a global sample for the period 2010–2017. Because spatial interactions in the agricultural production levels of countries are determined, spatial panel models are employed in the analyses. According to the analysis results, countries' financial, fiscal and monetary policies have an important effect on agricultural production. Besides, other important determinants of agricultural production are climatic conditions, land use and modern input use in agriculture. Our findings have important implications, especially for countries with low agricultural production.

Gli stili APA, Harvard, Vancouver, ISO e altri

23

Karthika, S., e M. Kannahi. "Biodiesel Production from Oleaginous Yeast". International Journal of Trend in Scientific Research and Development Volume-1, Issue-6 (31 ottobre 2017): 1096–106. http://dx.doi.org/10.31142/ijtsrd4691.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

24

Putri, Dewi Artanti, Roy R. Saputro e B. Budiyono. "Biogas Production from Cow Manure". International Journal of Renewable Energy Development 1, n. 2 (9 luglio 2012): 61–64. http://dx.doi.org/10.14710/ijred.1.2.61-64.

Testo completo

Abstract (sommario):

The production of biogas from livestock waste manure in particular is one of the alternative utilization of organic wastes that can be implemented in Indonesia since there is a huge potential of bio-energy in Indonesia. This study utilizes cow manure as the raw material for making biogas and it is coupled with a cow rumen fluid and water. The objective of this study is to determine the effect of manure, rumen, and water composition in biogas production. The research was conducted in anaerobic for 60 days. The composition of manure, water, and the rumen were vary following the variable and ratio; variable A (manure and water); variable B (manure and rumen). The results indicate that the variable A (manure and water) with a 1:3 ratio, and the variable B (manure and rumen) with a 1:2 ratio produced the highest volume of biogas compared to other ratios. The highest biogas production occurred on average at day 23.

Gli stili APA, Harvard, Vancouver, ISO e altri

25

Rajendrakumar, Shiny, V. K. Parvati e Anandhalakshmy Ram. "Automation of Production Management System". Bonfring International Journal of Software Engineering and Soft Computing 6, special issue (31 ottobre 2016): 234–38. http://dx.doi.org/10.9756/bijsesc.8285.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

26

Sathyaprakasan, Parvathy, e Geetha Kannan. "Economics of Bio-Hydrogen Production". International Journal of Environmental Science and Development 6, n. 4 (2015): 352–56. http://dx.doi.org/10.7763/ijesd.2015.v6.617.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

27

Petráš, R., J. Mecko e V. Nociar. "Value production of poplar clones". Journal of Forest Science 54, No. 6 (7 luglio 2008): 237–44. http://dx.doi.org/10.17221/12/2008-jfs.

Testo completo

Abstract (sommario):

The results of research on the value production of the stands of poplar clones Robusta and I-214 carried out in Slovakia are presented. Models of value yield tables were constructed separately for each clone. The models simulate gross and net financial yield of wood production in dependence on the site index and age of stand. They were constructed on the basis of the models of assortment yield tables, timber prices according to assortments and the models of own costs of timber felling and processing. The clone I-214 produces a faster and higher proportion of thicker assortments of average and below-average quality, and therefore it has the higher value production at a younger age only. Robusta produces smaller diameter but higher quality assortments and has the higher value production only at an older age. The site index of the stand is the most important factor in the value production of poplar clones. Differences in the production between site indexes are much greater than between the clones.

Gli stili APA, Harvard, Vancouver, ISO e altri

28

Aziz, Kasim O. "Cashmere Production from Maraz Goats". Journal of Zankoy Sulaimani - Part A 12, n. 1 (5 novembre 2008): 13–21. http://dx.doi.org/10.17656/jzs.10191.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

29

Satvoldievna, Umarova Dilfuza. "BASIC DUTIES OF DIGITAL PRODUCTION". American Journal of Engineering and Technology 5, n. 11 (1 novembre 2023): 125–29. http://dx.doi.org/10.37547/tajet/volume05issue11-18.

Testo completo

Abstract (sommario):

The term “digital manufacturing” can be interpreted quite broadly. Initially, computer-aided design systems fell under this definition. Then they began to include product life cycle management systems. It is clear that cloud technologies, additive manufacturing and augmented reality will also influence the development of digital manufacturing.

Gli stili APA, Harvard, Vancouver, ISO e altri

30

MALLARD, J., e J. C. MOCQUOT. "Insémination artificielle et production laitière bovine : répercussions d’une biotechnologie sur une filière de production". INRAE Productions Animales 11, n. 1 (2 febbraio 1998): 33–39. http://dx.doi.org/10.20870/productions-animales.1998.11.1.3914.

Testo completo

Abstract (sommario):

L’insémination artificielle à partir du sperme congelé de taureau est une des plus anciennes biotechnologies, apparue dans les années 40. Elle a induit des modifications profondes dans les pratiques et les structures de la filière bovine laitière. L’article en fait un recensement, en allant des plus immédiates aux plus indirectes. Elles vont de la création de marges liées à la disparition des taureaux de l’exploitation jusqu’à l’intégration de l’éleveur dans un réseau de relations professionnelles. Il devient ainsi un acteur et le bénéficiaire d’une sélection collective particulièrement efficace. Mais ce canal ouvre au-delà la voie à la pénétration du progrès technique et à la prise en charge des intérêts collectifs. On essaie de démontrer que ce ne sont pas forcément les conséquences les plus directes qui ont été les plus importantes, concluant qu’il est sans doute bien difficile de prévoir l’impact de biotechnologies récentes.

Gli stili APA, Harvard, Vancouver, ISO e altri

31

Ross, Andrew. "Production". Social Text 27, n. 3 (2009): 199–202. http://dx.doi.org/10.1215/01642472-2009-038.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

32

Weber, Alfred, Christian Ebert, Sotirios Arambatzis, Kerstin Hettich, Dirk Bönisch e Thomas Heptner. "PRODUCTION". ATZextra worldwide 15, n. 11 (gennaio 2010): 258–64. http://dx.doi.org/10.1365/s40111-010-0271-2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

33

Ruskowski, Martin, Arnold Herget, Jesko Hermann, William Motsch, Parsha Pahlevannejad, Aleksandr Sidorenko, Simon Bergweiler et al. "Production Bots für Production Level 4". atp magazin 62, n. 9 (17 settembre 2020): 62–71. http://dx.doi.org/10.17560/atp.v62i9.2505.

Testo completo

Abstract (sommario):

Nach nunmehr zehn Jahren Industrie 4.0 ist es an der Zeit, zurückzuschauen und die seinerzeitige Erwartungshaltung zu reflektieren, die von der Vision einer Produktion auf Basis autonomer Produktionseinheiten sprach. In der industriellen Praxis stellen wir jedoch fest, dass bei aller Digitalisierung von Maschinen an der eigentlichen Struktur der Produktionssteuerung bis heute nicht gerüttelt und die ursprüngliche Vision autonomer Produktionsmodule noch nicht umgesetzt wurde. Die Technologie-Initiative SmartFactory KL e.V. hat deshalb mit ihrem Leitbild Production Level 4 eine Vision für die nächsten Jahre erarbeitet, um wieder auf die ursprünglichen Ziele zu fokussieren. Zu deren Umsetzung entstand gemeinsam mit den Mitgliedsunternehmen ein neuer, modular erweiterbarer Demonstrator, der den Weg in eine europaweite Vernetzung von autonomen Produktionsanlagen im geplanten GAIA-X Verbund aufzeigt. Die fähigkeitsbasierte Kapselung von Produktionsschritten durch eine Bot-basierte Steuerungsstruktrur ist dabei ein Kernmerkmal der neuen Architektur.

Gli stili APA, Harvard, Vancouver, ISO e altri

34

Prosvirina, N. V., A. I. Tikhonov e H. I. Okagbue. "Lean Production Principles in Production Management". Russian Engineering Research 41, n. 12 (dicembre 2021): 1263–68. http://dx.doi.org/10.3103/s1068798x21120352.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

35

Lin, Der-Chen, e Jing-Shing Yao. "Fuzzy economic production for production inventory". Fuzzy Sets and Systems 111, n. 3 (maggio 2000): 465–95. http://dx.doi.org/10.1016/s0165-0114(98)00037-2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

36

Glavan, Miha, Dejan Gradišar, Stanko Strmčnik e Gašper Mušič. "Production modelling for holistic production control". Simulation Modelling Practice and Theory 30 (gennaio 2013): 1–20. http://dx.doi.org/10.1016/j.simpat.2012.07.010.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

37

Quick, Paddy. "Modes of Production and Household Production". Review of Radical Political Economics 48, n. 4 (11 ottobre 2016): 603–9. http://dx.doi.org/10.1177/0486613416655455.

Testo completo

Abstract (sommario):

This paper consists of a brief presentation of modes of production in class societies, highlighting the significance of household production in these. This is followed by a new approach to the conceptualization of the (non-class) communist mode of production and the place of household production in such a society.

Gli stili APA, Harvard, Vancouver, ISO e altri

38

Nagai, Hidetoshi, e Takahito Kuno. "A SIMPLICIAL BRANCH-AND-BOUND ALGORITHM FOR PRODUCTION-TRANSPORTATION PROBLEMS WITH INSEPARABLE CONCAVE PRODUCTION COST". Journal of the Operations Research Society of Japan 48, n. 2 (2005): 97–110. http://dx.doi.org/10.15807/jorsj.48.97.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

39

Meilany, Diah, Dewinka Anugeraheni, Abdul Aziz, Made Tri Ari Penia Kresnowati e Tjandra Setiadi. "The Effects of Operational Conditions in Scaling Up of Xylanase Enzyme Production for Xylitol Production". Reaktor 20, n. 1 (13 marzo 2020): 32–37. http://dx.doi.org/10.14710/reaktor.20.1.32-37.

Testo completo

Abstract (sommario):

The biological route to produce xylitol from Oil Palm Empty Fruit Bunches (EFBs) comprises of EFBs pretreatment, enzymatic hydrolysis, fermentation, and downstream separation of the produced xylitol. Due to the specificity in the hemicellulose composition of EFBs, a xylanase enzyme that has a high affinity to EFBs is required to hydrolyze the EFBs into xylose. In this research, the influences of aeration, humidity, and mixing in xylanase production were mapped. The xylanase production was performed by Aspergillus fumigatus ITBCCL170 in a solid-state fermentation using a tray fermenter with EFBs as the substrate. The optimal configuration was further scaled up into xylanase production using 1000 g of EFBs as the substrate. The results showed that the highest enzyme activity was 236.3 U/g EFB, obtained from the use of humid air airflow of 0.1 LPM, and mixing was performed once a day. The scaling up resulted in a lower xylanase activity and call for a better design of the fermenter.Keywords: aeration, humidity, mixing, OPEFBs, tray fermenter, xylanase, xylitol

Gli stili APA, Harvard, Vancouver, ISO e altri

40

Rosenfeld, Jordan S., e J. J. Hudson. "Primary production, bacterial production, and invertebrate biomass in pools and riffles in southern Ontario streams". Archiv für Hydrobiologie 139, n. 3 (6 giugno 1997): 301–16. http://dx.doi.org/10.1127/archiv-hydrobiol/139/1997/301.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

41

Inkaew, Yuttasart, Arthitaya Kawee-ai, Supakiat Supasin e Tanachai Pankasemuk. "Comparison of Coconut Coir and Soil Cultivations for Hemp Production: Plant Growth and Production Yield". International Journal of Research Publication and Reviews 5, n. 3 (2 marzo 2024): 511–15. http://dx.doi.org/10.55248/gengpi.5.0324.0619.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

42

MADEC, F., C. FOURICHON, P. MORVAN e A. LABBE. "Economie et santé en production porcine". INRAE Productions Animales 5, n. 2 (29 maggio 1992): 149–61. http://dx.doi.org/10.20870/productions-animales.1992.5.2.4229.

Testo completo

Abstract (sommario):

Le rôle de la pathologie sur les coûts de production et le revenu des éleveurs est largement évoqué dans la littérature vétérinaire. La plupart des auteurs s’accordent sur cette relation mais les avis sont nettement plus divergents en ce qui concerne l’estimation de l’impact en termes financiers. A l’échelle d’un élevage, lorsqu’il s’agit de maladies bien définies et intervenant sur une période bien délimitée les calculs sont facilités. Il s’agit essentiellement de maladies aigües entraînant une augmentation de la mortalité. Dans le cas de troubles chroniques, les calculs sont plus difficiles. Il y a lieu de prendre en compte des indicateurs de santé appropriés et objectifs. Différentes voies d’approche du coût des maladies du porc sont explorées et des exemples sont présentés. L’attention est attirée sur l’intérêt de l’analyse économique et sur l’intégration de paramètres sanitaires dans la gestion des élevages.

Gli stili APA, Harvard, Vancouver, ISO e altri

43

Lee, Jong-Tak, e Hoon-Sung Kwak. "On Production System by One-Person Production System in Broadcasting Program Production". Journal of the Korea Contents Association 7, n. 8 (28 agosto 2007): 117–24. http://dx.doi.org/10.5392/jkca.2007.7.8.117.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

44

Carlson, W. B. "World Oil Production Via Hubbert Linearization of Production and Normalizations of Production". Energy Sources, Part B: Economics, Planning, and Policy 7, n. 2 (gennaio 2012): 162–68. http://dx.doi.org/10.1080/15567249.2011.603021.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

45

Meiramkulova, K. S. "Analysis of the current state of production activity of the "Izhevsky" production cooperative of Akmola region". BULLETIN OF THE KARAGANDA UNIVERSITY. ECONOMY SERIES 100, n. 4 (30 dicembre 2020): 93–103. http://dx.doi.org/10.31489/2020ec4/93-103.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

46

SUCIU, Cristina, e Marioara TULPAN. "Production Process and Indicators of Production Systems". Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science 42, n. 1 (15 marzo 2019): 48–51. http://dx.doi.org/10.35219/mms.2019.1.08.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

47

Neugebauer, Reimund, Eberhard Kunke, Hans Bräunlich e Angela Göschel. "Geometry-Flexible Production – a Production Engineering Challenge". Key Engineering Materials 344 (luglio 2007): 301–8. http://dx.doi.org/10.4028/www.scientific.net/kem.344.301.

Testo completo

Abstract (sommario):

Today's automotive manufacturers are required to meet ever greater demands for increased flexibility due to decreasing batch sizes. Solutions to meet these demands will bring about far-reaching changes to the mass productions methods which currently dominate automotive manufacturing. In addition to the current need for sheet metal components, such trends will also have an effect on assembly and joining techniques used. The paper describes the challenge for production engineering resulting from current and future market demands.

Gli stili APA, Harvard, Vancouver, ISO e altri

48

Lin, You. "Planned Production Is Primary, Free Production Supplementary". Chinese Economic Studies 26, n. 3 (aprile 1993): 15–31. http://dx.doi.org/10.2753/ces1097-1475260315.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

49

Akhmetova, D. T., R. M. Zhunusova e B. S. Utibaev. "Increasing production efficiency in crop production farms". Problems of AgriMarket, n. 1 (15 marzo 2021): 57–65. http://dx.doi.org/10.46666/2021-1.2708-9991.07.

Testo completo

Abstract (sommario):

A comparative analysis of the efficiency of crop production and its cost is presented. The necessity of using an additive model and methodology for calculating the share influence of individual factors in determining production costs has been justified. The dynamics of indicators of the volume of proceeds depending on the sale of all products of crop production sector, as well as sales volume of wheat and barley according to the data of a specific agricultural enterprise are studied. The average annual growth rates of production and cost of these crops is calculated. The value and specific weight of production costs when growing them for the analyzed period is shown in comparison. It has been determined how, in quantitative terms, material costs and depreciation costs affect the amount of expenses. The relationship between the indicators of efficiency of crop production and cost price is considered. Its direct impact on the level of income in production and sale of products has been determined. The need for constant monitoring and stabilization of material costs is noted, especially for fuel and lubricants and spare parts, depreciation deductions, which are the main factors in increasing the profitability of goods. The necessity of constant monitoring of indicators calculated on the basis of economic factors that accumulate all elements of production process has been justified. In the conclusion of the article, the reserves for increasing the volume of crop production yields are revealed, recommendations on increasing competitive advantages in crop production sector are presented.

Gli stili APA, Harvard, Vancouver, ISO e altri

50

Lazarenkov, A. M. "Classification of production factors of foundry production". Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), n. 3 (10 settembre 2021): 118–22. http://dx.doi.org/10.21122/1683-6065-2021-3-118-122.

Testo completo

Abstract (sommario):

The classification of production factors of working conditions at the workplaces of the main equipment used in the foundry is given. This classification is developed on the basis of the results of the conducted research and based on the materials given in the domestic and foreign literature.This allows us to evaluate the technological processes and equipment used in the design and reconstruction of foundries (sections) to ensure the most favorable working conditions.

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!