Accedi

Bibliografie tematiche / Production scheduling / Articoli di riviste

Segui questo link per vedere altri tipi di pubblicazioni sul tema: Production scheduling.

Articoli di riviste sul tema "Production scheduling"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 30 luglio 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Production scheduling".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.

1

Fithri, Prima, e Fitri Ramawinta. "Penjadwalan Mesin dengan Menggunakan Algoritma Pembangkitan Jadwal Aktif dan Algoritma Penjadwalan Non-Delay untuk Produk Hydrotiller dan Hammermil pada CV. Cherry Sarana Agro". Jurnal Optimasi Sistem Industri 12, n. 2 (25 aprile 2016): 377. http://dx.doi.org/10.25077/josi.v12.n2.p377-399.2013.

Testo completo

Abstract (sommario):

Fulfillment of all demands of consumers who come to the product is one thing that always wanted to be achieved by a company. These requests are not independent of the company's ability to manufacture certain products. CV Cherry Sarana Agro manufactures a wide range of agricultural equipment, one of which is the product hydrotiller and hammermil. Demand for both products are always in large numbers for each period, however, the company could not meet the entire demand. One of the main factors that led this small company's production capacity for these two products is not optimal scheduling of machines made by companies, causing many to be a queue on a particular machine so that the total process operating time becomes very large. Scheduling method is used to optimize the scheduling of machines working on the report of this practice is actively scheduling method and the method of non-delay scheduling. The data needed to perform scheduling with both of these methods is the data used machines, data processing operations and data processing time of operation. With these three data, can be compared to the actual scheduling done by the company with the scheduling is done using active scheduling method and the method of non-delay scheduling. The most optimal scheduling is obtained after comparing the three methods used are scheduling using the non-delay scheduling. This method was chosen because the resulting make span is much smaller than the two other methods. This method is well applied in the company because in addition to reducing the total processing time, can also increase production capacity, so that all requests can be met.Keywords: Active schedulling method, non-delay schedulling method, makespan, hydrotiller, hammermil

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Li, Yingying. "Research on game scheduling of galvanizing pipe production". Functional materials 24, n. 3 (29 settembre 2017): 005–495. http://dx.doi.org/10.15407/fm24.03.490.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Kromodihardjo, Sudiyono, e Ergo Swasono Kromodihardjo. "Modeling of Well Service and Workover to Optimize Scheduling of Oil Well Maintenance". Applied Mechanics and Materials 836 (giugno 2016): 311–16. http://dx.doi.org/10.4028/www.scientific.net/amm.836.311.

Testo completo

Abstract (sommario):

Well maintenance (well service and workover) is an operation needed by oil company to guarantee the optimum productionof its oil well.Well maintenance is performed using large equipment called hydraulic workover unit (HWU-Rig) which is available in limited number. Scheduling sequence of the HWU-Rig to do well service must meet the goal of the maintenance that is to minimize the loss of oil well production due to well breakdown. Thus minimizing breakdown time of well with high rate production is a priority. However, scheduling secuence of the HWU-Rig to perform its task for few days ahead become complicated due to the numerous alternatives of secuence to choose. Each alternatives of sequence yields a certain production loss. Arbitrarily scheduling sequence may not yield the goal og minimizing the loss of well production. This research was done by analyzing workover scheduling system and data from Kondur Petroleum such as well location, well production rate, and service time needed to be performed on wells. Algorithm to create schedulling sequence was developed in the research. The algorithm was then implemented in discrete simulation software, and yield the result of absolute global optimal solution, near optimal solution and local optimal solution of the HWU scheduling problem.

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Mauergauz, Yuri. "Scheduling for production teams". International Journal of Industrial Engineering Computations 6, n. 3 (2015): 339–50. http://dx.doi.org/10.5267/j.ijiec.2015.3.001.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Zaremba, Marek B. "Scheduling of production processes". Control Engineering Practice 4, n. 1 (gennaio 1996): 141–42. http://dx.doi.org/10.1016/s0967-0661(96)90035-0.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Kolisch, Rainer, Marcus Brandenburg e Claus Krüger. "Numetrix/3 Production Scheduling". OR Spektrum 22, n. 3 (agosto 2000): 307–12. http://dx.doi.org/10.1007/pl00013336.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Schmidt, Günter. "Modelling production scheduling systems". International Journal of Production Economics 46-47 (dicembre 1996): 109–18. http://dx.doi.org/10.1016/0925-5273(95)00019-4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Nussbaum, Miguel, e Eduardo A. Parra. "A Production Scheduling System". ORSA Journal on Computing 5, n. 2 (maggio 1993): 168–81. http://dx.doi.org/10.1287/ijoc.5.2.168.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Taunton, J. C., e C. M. Ready. "Intelligent dynamic production scheduling". Food Research International 27, n. 2 (gennaio 1994): 111–16. http://dx.doi.org/10.1016/0963-9969(94)90151-1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Foote, B. L., A. Ravindran e S. Lashine. "Production planning & scheduling". Computers & Industrial Engineering 15, n. 1-4 (gennaio 1988): 129–38. http://dx.doi.org/10.1016/0360-8352(88)90075-7.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

11

Hruby, HF, e DM Panton. "Scheduling transfer champagne production". Omega 21, n. 6 (novembre 1993): 691–97. http://dx.doi.org/10.1016/0305-0483(93)90010-i.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

12

Hastings, N. A. J., e C. H. Yeh. "Job oriented production scheduling". European Journal of Operational Research 47, n. 1 (luglio 1990): 35–48. http://dx.doi.org/10.1016/0377-2217(90)90087-r.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

13

Paprocka, Iwona, e Bożena Skołud. "Robust Scheduling, a Production Scheduling Model of Failures". Applied Mechanics and Materials 307 (febbraio 2013): 443–46. http://dx.doi.org/10.4028/www.scientific.net/amm.307.443.

Testo completo

Abstract (sommario):

In the paper a production model with failures is presented where successive failure-free times are supposed to have normal distributions and are followed by normally distributed times of repairs. Unknown parameters of the distribution are estimated using e.g. empirical moments approach. Predictions of unknown parameters are done using classical regression method. Having Mean Time To First Failure, and Mean Time of Repair a disturbance robust predictive schedule is generated using an immune algorithm and rule Minimal Impact of Disturbed Operation on the Schedule.

Gli stili APA, Harvard, Vancouver, ISO e altri

14

Oike, Shunsuke, Tomohisa Tanaka, Jiang Zhu e Yoshio Saito. "Robust Production Scheduling Using Autonomous Distributed Systems". Key Engineering Materials 516 (giugno 2012): 166–69. http://dx.doi.org/10.4028/www.scientific.net/kem.516.166.

Testo completo

Abstract (sommario):

This research proposes a method of production scheduling using autonomous distributed systems. A concrete message protocol is proposed to realize the production scheduling which includes not only Machine but also Human and AGV scheduling. Moreover this method realizes real time scheduling and parallel scheduling. Therefore, a new structure of production scheduling is proposed, which can realize a change of the type of production scheduler to correspond with a type of production system.

Gli stili APA, Harvard, Vancouver, ISO e altri

15

Deb, Indranil, e Ranjan Kumar Gupta. "Application of Heuristics in Production Planning and Job Scheduling". International Journal of Research Publication and Reviews 4, n. 6 (13 giugno 2023): 2531–40. http://dx.doi.org/10.55248/gengpi.4.623.45166.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

16

Duan, Jing, Jianjun Yu e Guangwen Liang. "Food Production Enterprise Production Planning and Scheduling". Advance Journal of Food Science and Technology 10, n. 8 (15 marzo 2016): 558–62. http://dx.doi.org/10.19026/ajfst.10.2183.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

17

Norita, Defi, Ririn Regiana Dwi Satya, Andary Asvaroza Munita e Asep Endih Nurhidayat. "Production Scheduling Model and Machine Assignment to Automotive Parts Manufacturing for Optimum Production". International Journal of Engineering Research and Advanced Technology 09, n. 07 (2023): 20–34. http://dx.doi.org/10.31695/ijerat.2023.9.7.3.

Testo completo

Abstract (sommario):

PT. XYZ is a company engaged in the field of Automotive Parts Manufacturer. In carrying out its production this company uses make to order. The company carries out simple planning and scheduling, namely FCFS (First Come First Serve). The company has a problem, namely there is no production scheduling with the appropriate machine assignment. This causes the company to sometimes experience delays in completing the product. The purpose of this study is to overcome scheduling problems in companies to minimize order completion time (makespan). The method used in this study is the Heuristic Pour method, namely the development of a new heuristic algorithm in completing flowshop scheduling with the aim of minimizing makespan based on a combination approach and Genetic Algorithm which will be assisted with the help of MATLAB R2016a software which is a computational algorithm commonly used to solve a search for values in an optimization problem. Based on the data processing that has been done, the results of production scheduling are obtained using the Heuristic Pour method in the order Job 4 (J4)-Job 2 (J2) -Job 7 (J7) -Job 6 (J6) -Job 5 (J5) -Job 3 (J3) ) -Job 1 (J1) gets a makespan of 19440 minutes or equal to 16 working days with a total delay of 1 working day. While production scheduling with the selected Genetic Algorithm method getsthe order Job 4 (J4) -Job 2 (J2) -Job 7 (J7) -Job 6 (J6) -Job 3 (J3) -Job 1 (J1) -Job 5 ( J5) with the best makespan of 18660 minutes or 15 days, and there was no delay in completing requests. The company is expected to consider or review the use of the appropriate production scheduling method because it can provide a more optimum demand completion time (makespan), so the company can reduce delays in fulfilling customer requests.

Gli stili APA, Harvard, Vancouver, ISO e altri

18

Qin, Ling, e Shu Lin Kan. "Production Dynamic Scheduling among Factories Based on Multi-Agent". Advanced Materials Research 466-467 (febbraio 2012): 1386–91. http://dx.doi.org/10.4028/www.scientific.net/amr.466-467.1386.

Testo completo

Abstract (sommario):

To solve fluctuation problem in production plan and scheduling among factories, a logic framework of production dynamic scheduling among factories based on multi-agent technology was constructed. In this framework, the production dynamic scheduling multi-agent negotiation rules and mechanism among factories were established. Furthermore, the production dynamic scheduling multi-agent negotiation procedure among factories was investigated. Finally, the simulation system of production dynamic scheduling among factories based on multi-agent is demonstrated and validated by Flexsim software. It has shown the proposed method can improve the adaptability and stability of production plan and scheduling, and provide a support for optimal and dynamic production plan and scheduling among factories.

Gli stili APA, Harvard, Vancouver, ISO e altri

19

Brown, J. R., e C. O. Ozgur. "Priority class scheduling: Production scheduling for multi-objective environments". Production Planning & Control 8, n. 8 (gennaio 1997): 762–70. http://dx.doi.org/10.1080/095372897234650.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

20

Bhosale, Kailash Changdeorao, e Padmakar Jagannath Pawar. "Production planning and scheduling problem of continuous parallel lines with demand uncertainty and different production capacities". Journal of Computational Design and Engineering 7, n. 6 (14 luglio 2020): 761–74. http://dx.doi.org/10.1093/jcde/qwaa055.

Testo completo

Abstract (sommario):

Abstract Production planning and scheduling problems are highly interdependent as scheduling provides optimum allocation of resources and planning is an optimum utilization of these allocated resources to serve multiple customers. Researchers have solved production planning and scheduling problems by the sequential method. But, in this case, the solution obtained by the production planning problem may not be feasible for scheduling method. Hence, production planning and scheduling problems must be solved simultaneously. Therefore, in this work, a mathematical model is developed to integrate production planning and scheduling problems. The solution to this integrated planning and scheduling problem is attempted by using a discrete artificial bee colony (DABC) algorithm. To speed up the DABC algorithm, a k-means clustering algorithm is used in the initial population generation phase. This k-means clustering algorithm will help to converge the algorithm in lesser time. A real-life case study of a soap manufacturing industry is presented to demonstrate the effectiveness of the proposed approach. An objective function to minimize overall cost, which comprises the processing cost, material cost, utility cost, and changeover cost, is considered. The results obtained by using DABC algorithm are compared with those obtained by CPLEX software. There is a saving of ₹2 23 324 for weeks 1–4 in overall cost compared with the results obtained by using CPLEX software.

Gli stili APA, Harvard, Vancouver, ISO e altri

21

Simeonov, S., e J. Simeonovová. "Simulation scheduling in food industry application". Czech Journal of Food Sciences 20, No. 1 (18 novembre 2011): 31–37. http://dx.doi.org/10.17221/3506-cjfs.

Testo completo

Abstract (sommario):

Nowadays manufacturers are facing rapid and fundamental changes in the ways business is done. Producers are looking for simulation systems increasing throughput and profit, reducing cycle time, improving due-date performance, reducing WIP, providing plant-wide synchronization, etc. Planning and scheduling of coffee production is important for the manufacturer to synchronize production capacity and material inputs to meet the delivery date promised to the customer. A simulation model of coffee production was compiled. It includes roasting, grinding and packaging processes. Using this model the basic features of the coffee production system are obtained. An optimization module of the simulation SW is used for improving the current structure of the production system. Gantt charts and reports are applied for scheduling. Capacity planning problems related to coffee production are discussed.  

Gli stili APA, Harvard, Vancouver, ISO e altri

22

Zhang, Guohua, Xiang Li, Yang Yang e Minghuang Chen. "Study on Loading-Machine Production Scheduling Algorithm of Forest-Pulp-Paper Enterprise". Computer and Information Science 10, n. 2 (9 marzo 2017): 25. http://dx.doi.org/10.5539/cis.v10n2p25.

Testo completo

Abstract (sommario):

Through the needs of Loading-Machine storage scheduling in forestry-pulp-paper production logistics intelligent distribution system, analysis the Loading-Machine scheduling model of problems and improvement measures, put forward Loading-Machine intelligent production scheduling algorithm, based on ensuring the feasibility of scheduling, scheduling to rationalization, equalization, execute only, production process optimization, and realize the Loading-Machine intelligent production scheduling through the computer programming.

Gli stili APA, Harvard, Vancouver, ISO e altri

23

Zhang, Lie Ping, e Yun Sheng Zhang. "Research on Production Scheduling Problems in Process Industry Based on Ant Colony System". Advanced Materials Research 108-111 (maggio 2010): 519–24. http://dx.doi.org/10.4028/www.scientific.net/amr.108-111.519.

Testo completo

Abstract (sommario):

In order to improve the production of process industry, the ant colony system(ACS) was applied to the production scheduling problem. Based on the analysis of the production scheduling problem for process industry, a production scheduling model was established, whose goal was to obtain the shortest total process time. The search strategy, heuristic information rules, pheromone updating mechanism, process step starting time and detailed algorithm implementation of ACS were discussed. Using a practical production scheduling problem as an example, the established model and designed algorithm were applied to implement the scheduling simulation. The simulation results show that the scheduling model and algorithm are feasible, and have a better scheduling performance than the stochastic scheduling method, and can be applied to solve practical production scheduling problem for process industry.

Gli stili APA, Harvard, Vancouver, ISO e altri

24

Lai, Ling Hong. "Mixed-Model Flow Production Scheduling Method Based on Multi-Agent and Hybrid Genetic Algorithm". Applied Mechanics and Materials 63-64 (giugno 2011): 399–402. http://dx.doi.org/10.4028/www.scientific.net/amm.63-64.399.

Testo completo

Abstract (sommario):

To solve the dynamic and complex problem of production scheduling, depending on the introduction between multi-agent and hybrid genetic algorithm in mixed-model flow production scheduling, this paper proposed a mixed-model flow production scheduling method based on multi-agent and hybrid genetic algorithm. On the basis of this model, the mixed-model flow production scheduling procedure and strategy based on multi-agent and hybrid genetic algorithm were established. Finally, mixed-model flow production scheduling simulation system based on multi-agent and hybrid genetic algorithm was demonstrated and validated by QUEST software. It has shown the proposed method can improve the benefit of production scheduling, and provide a support for adapting to complex and dynamic production scheduling in mixed-model flow production.

Gli stili APA, Harvard, Vancouver, ISO e altri

25

Huang, Min, Ruixian Huang, Bo Sun e Linrong Li. "Research on the Production Scheduling Optimization for Virtual Enterprises". Mathematical Problems in Engineering 2013 (2013): 1–9. http://dx.doi.org/10.1155/2013/492158.

Testo completo

Abstract (sommario):

Production scheduling is a rather difficult problem in virtual enterprises (VE) for the tasks of production which would be executed by some distributed and independent members. Factors such as the timing constraints of task and ability restrictions of the members are considered comprehensibly to solve the global scheduling optimization problem. This paper establishes a partner selection model based on an improved ant colony algorithm at first, then presents a production scheduling framework with two layers as global scheduling and local scheduling for virtual enterprise, and gives a global scheduling mathematical model with the smallest total production time based on it. An improved genetic algorithm is proposed in the model to solve the time complexity of virtual enterprise production scheduling. The presented experimental results validate the optimization of the model and the efficiency of the algorithm.

Gli stili APA, Harvard, Vancouver, ISO e altri

26

Wiens, Tobias, e Christian A. Ullrich. "Scheduling with team production effects". International Journal of Operational Research 1, n. 1 (2021): 1. http://dx.doi.org/10.1504/ijor.2021.10043215.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

27

Metaxiotis, Kostas S., John E. Psarras e Kostas A. Ergazakis. "Production scheduling in ERP systems". Business Process Management Journal 9, n. 2 (aprile 2003): 221–47. http://dx.doi.org/10.1108/14637150310468416.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

28

Kumral, Mustafa. "Robust stochastic mine production scheduling". Engineering Optimization 42, n. 6 (giugno 2010): 567–79. http://dx.doi.org/10.1080/03052150903353336.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

29

Chryssolouris, G., N. Giannelos, N. Papakostas e D. Mourtzis. "Chaos Theory in Production Scheduling". CIRP Annals 53, n. 1 (2004): 381–83. http://dx.doi.org/10.1016/s0007-8506(07)60721-5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

30

Matsumoto, Kazuki, Hiroyoshi Miwa e Toshihide Ibaraki. "Scheduling of corrugated paper production". European Journal of Operational Research 192, n. 3 (febbraio 2009): 782–92. http://dx.doi.org/10.1016/j.ejor.2007.10.019.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

31

Trebuňa, Peter, e Miriam Pekarč’ková. "APP Method of Production Scheduling". Procedia Engineering 48 (2012): 679–83. http://dx.doi.org/10.1016/j.proeng.2012.09.570.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

32

Schulte, J. W., e B. D. Becker. "Production Scheduling Using Genetic Algorithms". IFAC Proceedings Volumes 25, n. 7 (maggio 1992): 367–72. http://dx.doi.org/10.1016/s1474-6670(17)52393-9.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

33

Rodríguez-Somoza, B., R. Galán e E. A. Puente. "Production Scheduling Using AI Techniques". IFAC Proceedings Volumes 23, n. 3 (settembre 1990): 387–92. http://dx.doi.org/10.1016/s1474-6670(17)52588-4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

34

Lane, Robin, e Stephen Evans. "Solving problems in production scheduling". Computer Integrated Manufacturing Systems 8, n. 2 (maggio 1995): 117–24. http://dx.doi.org/10.1016/0951-5240(95)00005-e.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

35

Kanet, John J., e Heimo H. Adelsberger. "Expert systems in production scheduling". European Journal of Operational Research 29, n. 1 (aprile 1987): 51–59. http://dx.doi.org/10.1016/0377-2217(87)90192-5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

36

Buxey, Geoff. "Production scheduling: Practice and theory". European Journal of Operational Research 39, n. 1 (marzo 1989): 17–31. http://dx.doi.org/10.1016/0377-2217(89)90349-4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

37

Wiens, Tobias, e Christian A. Ullrich. "Scheduling with team production effects". International Journal of Operational Research 48, n. 3 (2023): 281–315. http://dx.doi.org/10.1504/ijor.2023.134783.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

38

Dani, YUNIAWAN, e ITO Teruaki. "411 Production Scheduling of Central Kitchen for Bakso Restaurant Chain". Proceedings of Conference of Chugoku-Shikoku Branch 2012.50 (2012): 41101–2. http://dx.doi.org/10.1299/jsmecs.2012.50.41101.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

39

Водянова, Vyera Vodyanova, Ненашев e Oleg Nenashev. "Basic Models of Production Process Scheduling". Administration 3, n. 2 (17 giugno 2015): 16–21. http://dx.doi.org/10.12737/11505.

Testo completo

Abstract (sommario):

Paper has been devoted to methodological and theoretical ideas related to formation of hierarchy for basic dynamic models of production process scheduling which is an important component of quality control. However, the production process scheduling cannot be provided using universal modern simulation packages and requires the creation of special program, in which developed original algorithms for control of material and orders flows, and original scheduling algorithms are realized. For development of such original algorithms the hierarchy of material flows’ basic models may be useful. This hierarchy is based on hydraulic KT-model of elementary production link. In the paper the main directions of restrictions into the KT-model that allow expand basic models’ variety and create a flexible tool for production process scheduling model building have been presented.

Gli stili APA, Harvard, Vancouver, ISO e altri

40

Zhou, Qian, Xupeng Hu, Siyuan Peng, Yonghui Li, Tao Zhu e Hongyan Shi. "Scheduling Optimization of Printed Circuit Board Micro-Hole Drilling Production Line Based on Complex Events". Processes 11, n. 11 (26 ottobre 2023): 3073. http://dx.doi.org/10.3390/pr11113073.

Testo completo

Abstract (sommario):

The interdependence between the scheduling method and the production efficiency of a micro-hole drilling production line for printed circuit boards (PCBs) holds significant importance, necessitating the optimization of such a production line’s scheduling. Consequently, this research paper presents a scheduling optimization approach for the micro-hole drilling production line of a PCB, utilizing complex events as its foundation. Initially, a complex event model was constructed to establish correlations among extensive production line data. Subsequently, the typical complex events associated with the micro-hole drilling production line of a PCB were defined, thereby enabling the all-around monitoring of the operation state of such a production line. Furthermore, this study presents the establishment of a production scheduling model for PCB micro-hole drilling. With the goal of minimizing the maximum completion time, the catastrophe genetic algorithm was used to solve the initial scheduling scheme of the printed circuit board micro-hole drilling production line. The reliability and effectiveness of the catastrophe genetic algorithm in solving the hybrid-driven production scheduling problem of complex events were verified. Dynamic scheduling was performed when three complex events occurred in the production line: emergency order insertion, abnormal equipment operation, and tool failure. The scheduling optimization rate after identifying the emergency insertion event could reach 25.1%. The scheduling optimization rate of the production equipment operation event was related to the specific failure time of the equipment. The scheduling optimization rate after identifying the tool failure event could reach 25%. Rescheduling immediately after identifying the tool failure event could exert no effect on the initial scheduling process. It was proven that the identification and rescheduling of complex events can improve the production efficiency of a PCB micro-hole drilling production line.

Gli stili APA, Harvard, Vancouver, ISO e altri

41

MIYATA, Kohei, Norisuke FUJII, Noboru FUJITA, Taisei MASSAKI e Tatsumasa ISONO. "Simulation-based Production Scheduling Method for Flexible Production". Proceedings of Mechanical Engineering Congress, Japan 2023 (2023): S142–02. http://dx.doi.org/10.1299/jsmemecj.2023.s142-02.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

42

Chen, Xiaowu, Guozhang Jiang, Yongmao Xiao, Gongfa Li e Feng Xiang. "A Hyper Heuristic Algorithm Based Genetic Programming for Steel Production Scheduling of Cyber-Physical System-ORIENTED". Mathematics 9, n. 18 (14 settembre 2021): 2256. http://dx.doi.org/10.3390/math9182256.

Testo completo

Abstract (sommario):

Intelligent manufacturing is the trend of the steel industry. A cyber-physical system oriented steel production scheduling system framework is proposed. To make up for the difficulty of dynamic scheduling of steel production in a complex environment and provide an idea for developing steel production to intelligent manufacturing. The dynamic steel production scheduling model characteristics are studied, and an ontology-based steel cyber-physical system production scheduling knowledge model and its ontology attribute knowledge representation method are proposed. For the dynamic scheduling, the heuristic scheduling rules were established. With the method, a hyper-heuristic algorithm based on genetic programming is presented. The learning-based high-level selection strategy method was adopted to manage the low-level heuristic. An automatic scheduling rule generation framework based on genetic programming is designed to manage and generate excellent heuristic rules and solve scheduling problems based on different production disturbances. Finally, the performance of the algorithm is verified by a simulation case.

Gli stili APA, Harvard, Vancouver, ISO e altri

43

Zhu, Haihua, Yi Zhang, Changchun Liu e Wei Shi. "An Adaptive Reinforcement Learning-Based Scheduling Approach with Combination Rules for Mixed-Line Job Shop Production". Mathematical Problems in Engineering 2022 (5 settembre 2022): 1–14. http://dx.doi.org/10.1155/2022/1672166.

Testo completo

Abstract (sommario):

Affected by economic globalization and market diversification, more manufacturing enterprises realize that large-scale production cannot adapt to the current market environment. The new trend of multivariety customized mixed-line production brings a higher level of disturbances and uncertainties to production planning. Traditional methods cannot be directly applied to the classic flexible job shop scheduling problem (FJSP). Therefore, this paper presents an adaptive scheduling method for mixed-line job shop scheduling. First, the scheduling problem caused by combined processing constraints is studied and transformed by introducing the definition of virtual operation. According to the situation of the coexistence of trial-production and batch production, the disturbance processing mechanism is established. And a scheduling decision model is established based on contextual bands (CBs) in reinforcement learning to overcome the shortcoming of poor performance of traditional single dispatching rule strategy. Through continuous trial and error learning, each scheduler can select the most suitable scheduling rules according to the environment state. Finally, we benchmark the performance of the scheduling algorithm with scheduling methods based on a variety of single scheduling rules. The results show that the proposed algorithm not only improves the performance in the mixed production scheduling problem but also effectively copes with emergency trial-production orders.

Gli stili APA, Harvard, Vancouver, ISO e altri

44

Sharma, Pravesh. "Optimizing Production Scheduling in Manufacturing: Strategies and Technologies for Efficiency". INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, n. 05 (1 maggio 2024): 1–5. http://dx.doi.org/10.55041/ijsrem32497.

Testo completo

Abstract (sommario):

This is manufacturing, efficient production scheduling is crucial for maximizing output and reducing costs. This abstract describes strategies and technologies to achieve this efficiency. It covers aspects like demand forecasting, resource allocation, optimizing task sequencing, and leveraging real-time tracking. By implementing these methods, manufacturers can streamline workflow, minimize idle time, and ensure timely deliveries. This report explores the challenges faced in production scheduling in manufacturing and examines strategies and technologies that can be used to optimize scheduling processes. The report discusses the importance of production scheduling in achieving operational efficiency and meeting customer demands. Various strategies, such as lean manufacturing, just-in- time (JIT) production, and advanced planning and scheduling (APS) systems, are analyzed for their effectiveness in improving production scheduling. Additionally, the report explores technologies such as artificial intelligence (AI), machine learning, and the Internet of Things (IoT) that can enhance production scheduling capabilities. Case studies and examples are used to illustrate how these strategies and technologies have been implemented successfully in real-world manufacturing settings. The report concludes with recommendations for manufacturers looking to optimize their production scheduling processes.

Gli stili APA, Harvard, Vancouver, ISO e altri

45

Asmawar, Mellysa. "USULAN PENJADWALAN PRODUKSI PRODUK ST 37777 PT EBAKO NUSANTARA PADA DEPARTEMEN SMOOTHMILLING UNTUK MEMINIMASI MAKESPAN". J@ti Undip : Jurnal Teknik Industri 13, n. 1 (31 marzo 2018): 61. http://dx.doi.org/10.14710/jati.13.1.61-66.

Testo completo

Abstract (sommario):

AbstrakProses produksi ST 37777 di PT Ebako Nusantara menggunakan jadwal yang didasarkan oleh proses-proses yang dilakukan dengan menggunakan data historis yang telah ada dari proses produksi yang telah dilakukan. PT Ebako Nusantara merupakan industri manufaktur yang bergerak di bidang furnitur yang berlokasi di Terboyo, Semarang, Jawa Tengah. Dalam proses produksi ST 37777, terdapat 11 mesin dan 16 job dimana setiap job memiliki urutan mesin yang berbeda. Penjadwalan yang ada untuk produk tipe ST 37777 dengan tipe jobshop belum menerapkan suatu ketetapan dalam penentuan waktu dan urutan pengerjaan mesin yang efektif sehingga masih banyak job yang selesai terlambat. Untuk itu diperlukan suatu penjadwalan mesin yang efektif sehingga dapat memenuhi waktu produksi pesanan sesuai dengan yang telah disepakati. Penjadwalan jobshop diperlukan untuk memaksimumkan efisiensi dan utilitas sumber daya di lantai produksi. Penentuan jadwal mesin ini bertujuan meminimasi makespan dengan menggunakan Software WINQSB modul job schedulling. Metode yang digunakan adalah metode Short Processing Time. Hasil penjadwalan menggunakan Software WINQSB diperoleh makespan menjadi 15 jam dengan hasil penjadwalan tersebut tidak ada job yang terlambat dan semua job dikerjakan berurutan. AbstractThe production process of ST 37777 in PT Ebako Nusantara uses a schedule based on the processes performed using existing historical data from the production process that has been done. PT Ebako Nusantara is a manufacturing industry engaged in furnitur located in Terboyo, Semarang, Central Java. In the production process ST 37777, there are 11 machines and 16 jobs where each job has a different sequence of machines. The existing scheduling for ST 37777 type product with jobshop type has not been applied a determination in the timing and sequence of effective machine work so that many jobs are finished too late. For that required an effective engine scheduling so that it can meet the production time of orders in accordance with the agreed. Jobshop scheduling is needed to maximize efficiency and resource utilities on the production floor. Determination of this machine schedule aims to minimize the makespan using WINQSB Software job scheduling module. The method used is the method of Short Processing Time. The scheduling result using WINQSB software obtained makespan to 15 hours with scheduling result no job is late and all job done in sequence. Keywords: Jobshop Scheduling; Short Processing Time; Makespan Minimization

Gli stili APA, Harvard, Vancouver, ISO e altri

46

KUSWANDI, IMRON. "MINIMASI MASKEPAN DENGAN PENJADWALAN PRODUKSI PADA TIPE PRODUKSI BERULANG". Jurnal Teknik Industri 11, n. 1 (18 febbraio 2012): 84. http://dx.doi.org/10.22219/jtiumm.vol11.no1.84-93.

Testo completo

Abstract (sommario):

Methodologically there are some problems in the methods of scheduling production whichhave been available. In the methods of scheduling production which have been available, it isoften less capable for giving the real condition images from the real systems. It is indicated bythe given assumption that each operation should be finished previously before the other operationsare done. This case is inappropriate if applied in the repetitive production types as happenedin X Gresik, Co. Ltd. Because methodologically there are some problems in the methodsof scheduling conventional production, so in this research the methods of scheduling conventionalproduction are modified by using Microsoft excel application software, so it enables inthis method to handle the case of scheduling production in the types of repetitive production.urthermore, by using the methods of scheduling production modified by using Microsoft excelapplication software, the scheduling can be achieved by the better makespan (makespan =471,17 hours), so the production facility utilities are also more optimal compared to productionscheduling results by conventional approach (makespan = 893,7 hours).

Gli stili APA, Harvard, Vancouver, ISO e altri

47

Bożek, Andrzej, e Marian Wysocki. "Off-Line and Dynamic Production Scheduling – A Comparative Case Study". Management and Production Engineering Review 7, n. 1 (1 marzo 2016): 21–32. http://dx.doi.org/10.1515/mper-2016-0003.

Testo completo

Abstract (sommario):

Abstract A comprehensive case study of manufacturing scheduling solutions development is given. It includes highly generalized scheduling problem as well as a few scheduling modes, methods and problem models. The considered problem combines flexible job shop structure, lot streaming with variable sublots, transport times, setup times, and machine calendars. Tabu search metaheuristic and constraint programming methods have been used for the off-line scheduling. Two dynamic scheduling methods have also been implemented, i.e., dispatching rules for the completely reactive scheduling and a multi-agent system for the predictivereactive scheduling. In these implementations three distinct models of the problem have been used, based on: graph representation, optimal constraint satisfaction, and Petri net formalism. Each of these solutions has been verified in computational experiments. The results are compared and some findings about advantages, disadvantages, and suggestions on using the solutions are formulated.

Gli stili APA, Harvard, Vancouver, ISO e altri

48

Pan, Feng Shan, Chun Ming Ye e Ji Hua Zhou. "Re-Entrant Production Scheduling Problem under Uncertainty Based on QPSO Algorithm". Applied Mechanics and Materials 66-68 (luglio 2011): 1061–66. http://dx.doi.org/10.4028/www.scientific.net/amm.66-68.1061.

Testo completo

Abstract (sommario):

Production scheduling problem is the one of the most basic, important and difficult theoretical research in a manufacturing system. In the past decades of research, the classical scheduling theory has made signficant progress, but the actual scheduling problems are much more complicated than the classical theory. In order to study, the actual scheduling problems are often made much simpler. Therefore, it is difficult for the results of the classical scheduling theory to been put into practice. The considerable gap also exists between the classical scheduling theory and the actual scheduling problem. But with the increasingly fierce market competition, customers have become increasingly demanding product diversification, product life cycle is shorter and more sophisticated structure of the product makes the actual scheduling a large number of uncertainties, the traditional model has become difficult to obtain satisfactory results. This paper makes a analysis on the uncertainties of production scheduling,and tries to solve re-entrant production scheduling problem based on QPSO. It introduces the mathematical model and the solving process based on QPSO algorithm. Then it makes construction strategies to solve it. The paper simulates with Visual C. The results show that this algorithm is feasibility.

Gli stili APA, Harvard, Vancouver, ISO e altri

49

Yu, Jian Guo, Mei Lin Feng, Yu Wu e Peng Peng Huang. "Research on Design and Development for Integrated Production Planning and Scheduling System of Rare Metal Manufacturing Based on WEB Platform". Applied Mechanics and Materials 271-272 (dicembre 2012): 1490–94. http://dx.doi.org/10.4028/www.scientific.net/amm.271-272.1490.

Testo completo

Abstract (sommario):

Aiming at the design and development of integrated production planning and scheduling system(PPSS) of rare metal manufacturing, the goals and main functions of the integrated production planning and scheduling system were analyzed and designed based on the analysis of rare metal manufacturing enterprise’s main characteristics and management status. Through analysis of the present situation and trend of production planning and scheduling, an integrated system architecture was proposed. Key technologies of system integration and system developing were delivered, and some key functions of production planning and scheduling system which include annual plans management, monthly plans management, MRP management, production scheduling management and production Kanban management were developed based on JSP technology and WEB platform. The practical applications in some rare metal manufacturing enterprises were proved that the integrated production planning and scheduling system could enhance the manufacturing management level effectively.

Gli stili APA, Harvard, Vancouver, ISO e altri

50

Gu, Jian, e Wei Min Mao. "A Production Scheduling Framework Integrated with Simulation Module". Advanced Materials Research 602-604 (dicembre 2012): 1831–34. http://dx.doi.org/10.4028/www.scientific.net/amr.602-604.1831.

Testo completo

Abstract (sommario):

It is necessary to achieve high system performances in terms of throughput rate and service level in today’s business environment. This can be achieved by implementing efficient and effective production planning methods complemented with precise and fast scheduling predictions. A framework is proposed to integrate real-time production data, scheduling mechanisms and simulation for providing realistic scheduling policies that could be used for operational and tactical decision-making. The focus is on the use of discrete event simulation utilizing relevant shop floor data, provided by an ERP system. A primary objective is to evaluate and characterize scheduling policies in a discrete manufacturing environment.

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!