Bibliografie tematiche / Processability

Letteratura scientifica selezionata sul tema "Processability"

Autore: Grafiati
Pubblicato: 4 giugno 2021
Ultima modifica: 28 gennaio 2023

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Indice

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Processability".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Processability"

1

Hammarberg, Björn. "Examining the Processability Theory". EUROSLA 6 55 (1 gennaio 1996): 75–88. http://dx.doi.org/10.1075/ttwia.55.07ham.

Testo completo
Abstract (sommario):
The Processability Theory (PT), originating from the German ZISA Project and recently revised by Pienemann (1993, in prep.), claims that the order of grammatical development in a second language is determined by a hierarchy of psycholinguistic constraints on the processability of grammatical structures. The present paper discusses some problematic aspects of this theory and argues for a dynamic view of L2 acquisition in which factors which drive acquisition ahead are also taken into account. It is suggested that a Principle of Perceived Communicative Value (PCV) plays a part in conditioning the order of L2 development. The relative role of processability and communicative value factors is investigated here in a case where they compete. The acquisition of adjective agreement in L2 Swedish is chosen as a test case to examine predictions about the order of development derived from PT and PCV. This permits the comparison of a phrasal (NP) and inter-phrasal (subject-predicative) syntactic domain as well as the comparison of different morphological categories (gender and number). Longitudinal data are gathered from a corpus of conversations with six adult learners reflecting successive stages of development for each individual from the beginning stage to an advanced level. The results indicate that the nature of the morphological category is decisive in determining acquisition order, which means that PCV is effective and overrules PT in those cases where the two are in conflict. On the other hand, if the same morpho-logical category is compared in different syntactic domains, PTs prediction that phrasal agreement comes before inter-phrasal agreement is borne out. This suggests that the two principles of processability and communicative relevance interact, and that a theory of processability is neither sufficient nor invalid, but needs to be placed in the context of a wider model of L2 development. It lends support to the dynamic view of L2 acquisition discussed in the paper.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Wu, Zexiong, Zishou Zhang e Kancheng Mai. "Preparation and thermal property of ultrahigh molecular weight polyethylene composites filled by calcium carbonate modified with long chain". Journal of Thermoplastic Composite Materials 33, n. 4 (30 ottobre 2018): 464–76. http://dx.doi.org/10.1177/0892705718807955.

Testo completo
Abstract (sommario):
Ultrahigh molecular weight polyethylene (UHMWPE) is an excellent property polymer, but its poor processability due to high melt viscosity limits the more wide-ranging application. To improve the processability of UHMWPE composites filled by calcium carbonate (CaCO3), a novel method is reported to modify CaCO3. PE wax coated on the surface of CaCO3 (PEW@CaCO3) can be prepared by acrylic acid–modified CaCO3 (AA-CaCO3) and PE wax. The crystallization and melting behavior of UHMWPE and its composites filled by CaCO3, AA-CaCO3, and PEW@CaCO3 was compared by differential scanning calorimetry. The processability of UHMWPE composites was characterized by torque rheometer. The effect of CaCO3, AA-CaCO3, and PEW@CaCO3 on the crystallization and processability of UHMWPE was discussed.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Aversa, Raffaella, Daniela Parcesepe, Relly Victoria V. Petrescu, Filippo Berto, Guanying Chen, Florian Ion T. Petrescu, Francesco Tamburrino e Antonio Apicella. "Processability of Bulk Metallic Glasses". American Journal of Applied Sciences 14, n. 2 (1 febbraio 2017): 294–301. http://dx.doi.org/10.3844/ajassp.2017.294.301.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Kanai, Toshitaka, e Akira Funaki. "PROCESSABILITY OF T-DIE EXTRUSION". Sen'i Gakkaishi 42, n. 1 (1986): T1—T10. http://dx.doi.org/10.2115/fiber.42.t1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Weber, Tatiana, Márcia G. Oliveira, Mara Zeni, Janaina S. Crespo e Regina C. R. Nunes. "Processability of revulcanizable SBR compositions". Polymer Bulletin 61, n. 2 (25 aprile 2008): 217–24. http://dx.doi.org/10.1007/s00289-008-0937-3.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Choudhury, Anup, Céline Pichon, Jean-Pascal Sutter, Dobbidi Pamu, Bipul Sarma, Prashurya Pritam Mudoi e Nayanmoni Gogoi. "Accessing water processable cyanido bridged chiral heterobimetallic Co(ii)–Fe(iii) one dimensional network". Chemical Communications 57, n. 2 (2021): 207–10. http://dx.doi.org/10.1039/d0cc05356b.

Testo completo
Abstract (sommario):
A simple approach to impart water processability in cyanido bridged extended structures are described. A chiral cyanido bridged Co(ii)–Fe(iii) extended structure is assembled and its water processability is demonstrated.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Kimura, Takeyoshi, Takumitsu Kida e Masayuki Yamaguchi. "Viscoelastic Properties of Fully Biomass-Based Transparent Plastic Comprising Cellulose Acetate and Citrate Ester". Materials 15, n. 9 (22 aprile 2022): 3038. http://dx.doi.org/10.3390/ma15093038.

Testo completo
Abstract (sommario):
Viscoelastic properties including melt processability were evaluated for a fully biomass-based glassy plastic comprising cellulose acetate (CA) and triethyl citrate (TEC). The TEC exerted an excellent plasticizing effect without dissolving the CA crystals. Pure CA has poor melt processability. In contrast, the TEC-plasticized CA had good melt-processability at 205 °C, which is lower than the degradation temperature of CA. Extrusion was possible even at 1000 s−1 without any flow instabilities, similar to conventional plastics showing good processability at extrusion. Furthermore, there was marked strain-hardening behavior in the transient elongational viscosity, suggesting that various processing operations are possible, such as a long-chain branched polymer. This biomass-based plastic can be used as a substitute for conventional glassy plastics because it is highly transparent and its softening temperature is above 100 °C.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Schaal, Stéphane, e Aubert Y. Coran. "The Rheology and Processability of Tire Compounds". Rubber Chemistry and Technology 73, n. 2 (1 maggio 2000): 225–39. http://dx.doi.org/10.5254/1.3547587.

Testo completo
Abstract (sommario):
Abstract The purpose of the work reported here was to define the parameters, which affect the rheology of tire compounds as well as their processability. Rheology was characterized over a wide range of shear rates. Processability was defined inversely as the roughness of the extrudate from the Monsanto Processability Tester (MPT) capillary rheometer. The roughness was measured by using image analysis of the extrudate surface contour. A good correlation was found between the extrudate roughness and the size of the Mooney peak (peak in apparent stress plotted against time for very small shear rates in a start-up flow experiment). The Mooney peak can be represented as a yield stress. The effects of storage time and temperature on the size of the Mooney peak (i.e., its increase as a function of storage time) was studied. The kinetics of degradation of processability was not found to follow an Arrhenius type of behavior. Finally, a physical descriptive model was proposed to represent filler—rubber structures.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Shiga, S. "Rubber Processability Index Using Electrical Resistivity". Rubber Chemistry and Technology 65, n. 3 (1 luglio 1992): 660–72. http://dx.doi.org/10.5254/1.3538632.

Testo completo
Abstract (sommario):
Abstract It may not be realistic to expect a single processability index to be useful for every feature of rubber mixing due to the complexity of its mechanisms. Many processability indices have been proposed. One can find properties available to define the indices in Table I. The indices can be conceptually classified into two categories. One is founded on the singularity of some properties at the minimum mixing time. The compound mixed over this time is Theologically homogeneous in contrast to that mixed insufficiently. Therefore, this time is a phase-transition point. Not all, but most of the properties indicate the sudden change in the time-derivatives characteristic to singular points. After the time, the change becomes smaller. The other is founded on the properties of final compounds, which could be assumed as existing in a pseudoequilibrium state. Electrical volume resisitivity (resisitivity, hereafter) is chosen for this purpose. It looks simple and suitable for practice, i.e., in rubber factories. Actually, as reported by Boonstra, the measurement requires skill in addition to special equipment and is not a popular method. Nevertheless, we have used it to express the processability and, more generally, to clarify the mixing mechanism. There are three reasons for this methodology: first, we find that EPR, the object of our study, apparently shows constant minimum mixing time; second, the pseudoequilibrium-like resistivity is parallel to other processability indices, namely, the larger the resistivity, the worse the processability as described in Reference 1; third, the resistivity directly corresponds to the percolation theory. Of course, other processability indices have their own theoretical origins. However, properties other than resistivity can not be quantitatively supported by theory because of the complexity of mixing. The exceptions are microscopic methods as exemplified by the counting of large agglomerates and their size distribution, but these are more tedious and require more skill.
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Rine, David C. "Parallel and Distributed Processability of Objects". Fundamenta Informaticae 12, n. 3 (1 luglio 1989): 317–56. http://dx.doi.org/10.3233/fi-1989-12304.

Testo completo
Abstract (sommario):
Partitioning and allocating of software components are two important parts of software design in distributed software engineering. This paper presents two general algorithms that can, to a limited extent, be used as tools to assist in partitioning software components represented as objects in a distributed software design environment. One algorithm produces a partition (equivalence classes) of the objects, and a second algorithm allows a minimum amount of redundancy. Only binary relationships of actions (use or non-use) are considered in this paper.
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "Processability"

1

Zhang, Fangzhu. "The genetic basis of salad leaf processability". Thesis, University of Southampton, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.436976.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Zhu, Xiaojing. "Processability of Nickel-Boron Nanolayer Coated Boron Carbide". Diss., Virginia Tech, 2008. http://hdl.handle.net/10919/28633.

Testo completo
Abstract (sommario):
This dissertation work focuses on the processability improvement of B4C, especially the compaction and sintering improvement of B4C by applying a Ni-B nanolayer coating on individual B4C particles. A modified electroless coating procedure was proposed and employed to coat nanometer Ni-B layer onto micron-sized B4C particles. The thickness was able to be tuned and controlled below 100 nm. Key parameters, including the amount of nickel source, the amount of the surface activation agent (PdCl2), the amount of the complexing agent (C2H8N2), and the addition rate of the reducing agent (NaBH4) were studied. When the targeted thickness was 5 nm, a continuous and uniform nanolayer coating was obtained with the optimal condition of individual parameter combined. Reduction of the as-coated B4C powder in a H2-Ar atmosphere was studied between 400-900ºC to reduce the surface oxidesâ Ni2O3 and B2O3. Reduction at 800ºC in hydrogen atmosphere was found to be the most effective condition to remove oxygen in the coating layer, with Ni2B as the reduction product. Compaction of the as-received, separated and uncoated, and separated with Ni-B coating B4C powders using uniaxial die compaction and combustion driven compaction (CDC) techniques was studied. CDC technique showed the advantage over the traditional uniaxial die compaction by yielding much higher green density and green strength (73% vs. 53.8% green density for the Ni-B coated B4C). Among compacts obtained from the same technique, Ni-B coated B4C compact yielded the densest packing with crack-free compact surface and the highest strength, demonstrating more bonding between B4C particles provided by Ni-B surface coating. Sintering of the Ni-B coated B4C in an Ar atmosphere between 1150 - 1600ºC with soaking time of 2 hrs and 10 hrs was studied. Liquid phase was found to form during the sintering process. Density measurement showed that the liquid phase Ni-B formed greatly facilitated B4C densification. Considerable density increase and inter-granular connection was achieved when sintered at 1600ºC for 10 hrs. The density enhancement by Ni-B coating was supported by transmission electron microscopy-energy dispersive spectroscopy (TEM-EDS) examination which showed that there was B4C species diffusion into liquid Ni-B phase. This liquid phase enhanced the diffusion of B4C species and formed strong bonding between B4C grains by dissolving small B4C particles and sharp edge and corners of B4C particles. Strength test demonstrated that the Ni-B coating dramatically improved the strength of B4C compacts by yielding a much higher strength of the Ni-B coated samples than the uncoated samples (13.97 vs. 1.79 MPa for the uinaxial die compacted samples, 27.03 vs. 2.21 MPa for the CDC samples). Electrical conductivity Ni-B coated B4C samples was also shown to be improved with the electrical resistivity being reduced from infinite for pure B4C samples to 1.8à 10-3 Ω⠢m for the Ni-B coated samples. This research work has shown that with the Ni-B coating, B4C densification can start at a temperature as low as 1600ºC via a liquid phase sintering process.
Ph. D.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Lin-Gibson, Sheng. "Cresol Novolac/Epoxy Networks: Synthesis, Properties, and Processability". Diss., Virginia Tech, 2001. http://hdl.handle.net/10919/27296.

Testo completo
Abstract (sommario):
Void-free phenolic networks have been prepared by the reaction of phenolic novolac resins with various diepoxides. The stoichiometric ratio can be adjusted to achieve networks with good mechanical properties while maintaining excellent flame retardance. A series of linear, controlled molecular weight, 2,6-dimethylphenol endcapped cresol novolac resins have been synthesized and characterized. The molecular weight control was achieved by adjusting the stoichiometric ratio of cresol to 2,6-dimethylphenol and using an excess of formaldehyde. A dynamic equilibrium reaction was proposed to occur which allowed the targeted molecular weight to be obtained. A 2000 g/mol ortho-cresol novolac resin was crosslinked by a diepoxide oligomer and by an epoxidized phenolic oligomer in defined weight ratios and the structure-property relationships were investigated. The networks comprised of 60 or 70 weight percent cresol novolac exhibited improved fracture toughness, high glass transition temperatures, low water uptake, and good flame retardance. The molecular weights between crosslinks were also determined for these networks. The stress relaxation moduli were measured as a function of temperature near the glass transition temperatures. Crosslink densities as well as the ability to hydrogen bond affect the glassy moduli of these networks. Rheological measurements indicated that cresol novolac/epoxy mixtures have an increased processing window compared to phenolic novolac/epoxy mixtures. Maleimide functionalities were incorporated into cresol novolac oligomers, and these were crosslinked with bisphenol-A epoxy. The processability of oligomers containing thermally labile maleimides were limited to lower temperatures. However, sufficiently high molecular weight oligomers were necessary to obtain good network mechanical properties. Networks prepared from 1250 g/mol cresol novolac containing maleimide functionilities and epoxy exhibited good network properties and could be processed easily. Latent triphenylphosphine catalysts which are inert at processing temperatures (~140°C) but possess significant catalytic activity at cure temperatures 180-220°C were necessary for efficient composite fabrication using phenolic novolac/epoxy matrix resins. Both sequestered catalyst particles and sizings were investigated for this purpose. Phenolic novolac/epoxy mixtures containing sequestered catalysts exhibited significantly longer processing time windows than those containing free catalysts. The resins also showed accelerated reaction rates in the presence of sequestered catalysts at cure temperatures. Trihexylamine salt of a poly(amic acid) was sized onto reinforcing carbon fibers and the composite properties indicated that fast phenolic novolac/epoxy cure could be achieved in its presence.
Ph. D.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Jin, Lin. "Applications of Polybenzoxazines for Improvement in Processability and Property". Cleveland, Ohio : Case Western Reserve University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=case1264103508.

Testo completo
Abstract (sommario):
Thesis (Doctor of Philosophy)--Case Western Reserve University, 2010
Department of Macromolecular Science and Engineering Title from PDF (viewed on 2010-05-25) Includes abstract Includes bibliographical references and appendices Available online via the OhioLINK ETD Center
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Dimassi, Ossama Khalil. "Yield, composition and processability of Dahlem cashmere goats' milk". Beuren Stuttgart Grauer, 2005. http://d-nb.info/989886174/04.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Clarkson, Graham John Joseph. "The diagnosis and manipulation of baby salad leaf processability". Thesis, University of Southampton, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.402403.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Bayram, Fatih. "Acquisition of Turkish by heritage speakers : a processability approach". Thesis, University of Newcastle upon Tyne, 2013. http://hdl.handle.net/10443/1905.

Testo completo
Abstract (sommario):
This study presents the findings of cross-sectional psycholinguistic research investigating the first-language acquisition of Turkish among heritage speakers in Germany. Studies in heritage language acquisition in the last decades have provided increasing evidence that heritage speakers do not always converge on the grammars of native speakers, which is predominantly explained in relation to estimates of reduced input and output conditions. Nonetheless, Montrul (2010) underlines the fact that estimates of input cannot be used as measurements and addresses the need for a well-established theoretical framework that will account for the development of heritage speakers’ linguistic system to explain why heritage speakers succeed - or fail - in language acquisition in the ways that they do. This study aims to fill this gap by looking at the phenomena from a developmental perspective within the formalisms of Processability Theory (Pienemann, 1998, 2005), a well-established crosslinguistic approach to acquisition based on the architecture of the human language processor, but which has not previously been applied to Turkish. This study investigated the grammatical competence of twenty-four young heritage speakers of Turkish in Germany by testing their online processing of various Turkish grammatical structures, focusing on passives and subject relative clauses. The results demonstrate that the language acquisition of Turkish heritage speakers is developmentally constrained by availability of processing mechanisms. The participants displayed a clear hierarchy in their development, with competence in the processing of basic grammatical structures that are canonically mapped, but with gaps in the processing of complex structures such as passives and subject relative clauses that are non-canonically mapped and involve long-distance dependencies. This study thus contributes important insights both to theoretical accounts of acquisition of Turkish, and to the wider study of heritage language acquisition.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Rudbratt, Filip, e Martin Wretlind. "Production and processability for future square shank tool holders". Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-69147.

Testo completo
Abstract (sommario):
The square shank tool holder is one of Sandvik Coromants most common products. The tool holder has been manufactured the same way for 25 years without changing tolerances. However, it is predicted that tighter tolerances will be required in the future to maintain competitiveness.   The purpose of the thesis was to study how today's square shank tool holders can be made straighter and to what price it can be done. The tolerances allow too much convexity and concavity which might lead to unstable products. To find where in the current production flow the greatest impact occurs, the production flow was studied and then a common square shank tool holder with high production volume was followed through the production flow.   The tool holders were measured with a CMM after each station and analysis showed that the hardening station has the largest impact on the tolerances. This lead to six experiments using different manufacturing methods and the results were compared to see what production flow that allowed the best tolerances and lowest cost.   The results lead to two optional ways of manufacturing since they showed better results with a production economic perspective. Option 1 includes manufacturing in hardened material and Option 2 includes a grinding process.   The production flow for Option 1 is to first harden the blank followed by the manufacturing processes. By moving the hardening processes to the beginning of the production flow, the shape changing is prevented and the final product becomes straighter and obtains a smooth and aesthetic surface since the hardening process creates a rough surface. The production time is increased by CON% and the production cost is increased by CON%. The bottom side flatness tolerance of the final product is reduced by CON%.   The production flow for Option 2 is to first manufacture the shank followed by hardening. After the hardening process the tools get surface grounded on the bottom side and the outside. By grinding the tool holder, it becomes straight and the surface flatness obtains a tolerance of CON mm. The production time is increased by CON% and the production cost is increased by CON%. The bottom surface flatness tolerance of the final product is reduced by CON%.   The advantages of Option 1 are that the final product becomes better and it is easy to apply in the current production flow. The advantages of Option 2 the surface becomes very flat and the tool holder is more competitive.   By choosing any of these two options, Sandvik Coromant will achieve a straighter and more competitive final product.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Tyberg, Christy Sensenich. "Void-Free Flame Retardant Phenolic Networks: Properties and Processability". Diss., Virginia Tech, 2000. http://hdl.handle.net/10919/26554.

Testo completo
Abstract (sommario):
Phenolic resins are important components of the composite industry because of their excellent flame retardance and cost effectiveness. However, the common procedure for curing phenolic novolac resins uses hexamethylenetetramine (HMTA) and releases volatiles during the cure, which produce networks with numerous voids. This results in materials that lack the toughness necessary for structural applications. An alternative to curing with HMTA is to crosslink the pendant phenolic groups in the novolac resin with epoxy reagents. This reaction proceeds by nucleophilic addition without the release of any volatiles, thereby creating a void-free network. Flame retardance can be achieved by using an excess of the phenolic component. Network densities can also be controlled to maximize both toughness and stiffness by tailoring the stoichiometry of the reagents. Structure-property relationships of phenolic/epoxy networks have been investigated. Glass transitions decreased, and toughness increased, as the phenolic content in the network was increased. Both results could be correlated to the decrease in network densities along this series, which was investigated by measuring the rubbery moduli well above Tg. Fracture toughness of phenolic/epoxy networks measured by K1c reached 1.03 MPa-m1/2, compared with an epoxy control with K1c = 0.62 MPa-m1/2 and phenolic control with K1c = 0.16 MPa-m1/2. In addition, an increase in novolac content improves flame retardance rather dramatically. The peak heat release rate (PHRR) dropped from 1230 kW/m²⁺ for the epoxy control to 260 kW/m²⁺ for the phenolic/epoxy networks, which approached that of a phenolic resol (PHRR = 116 kW/m²⁺). Phenolic/epoxy composite flame retardance also showed significant improvement when compared to epoxy composites. Melt processability of phenolic/epoxy composites has been achieved through the use of latent nucleophilic initiators. Kinetics of the phenolic/epoxy cure reactions with latent initiators demonstrated that monomeric phosphine initiators yielded faster cure reactions as compared to polymeric initiators. These latent initiators allow composite melt processing, such as prepregging or pultrusion, without premature curing. In addition, cure cycles can be reduced from 4 hours to less than 30 minutes. Composites prepared using these latent initiators had toughness exceeding that of epoxy composites and fatigue limits significantly higher than those of vinyl ester composites. Vita removed, June 10, 2013, per author's request. GMc
Ph. D.
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Wang, Xiaojing. "Grammatical development among Chinese L2 learners : from a processability account". Thesis, University of Newcastle Upon Tyne, 2011. http://hdl.handle.net/10443/1301.

Testo completo
Abstract (sommario):
This study is to investigate the second language acquisition of Chinese grammatical structures by eight Chinese L2 learners. Adopting the theoretical framework of Professor Manfred Pienemann’s Processability Theory (PT), this study focuses on the confirmation and extension of the developmental sequence of the grammatical items found by Zhang (2001 and 2008) and Gao (2005). In essence, this study employed a longitudinal and cross-sectional design. Eight Chinese L2 students from the undergraduate Chinese programme at Newcastle University have been voluntarily selected to join my study. These eight students have a variety of language learning experience and backgrounds, but most importantly (different from other PT-based studies), they have been taught using a completely different textbook and curriculum when compared with the PT-driven developmental sequence. The interviews (elicitation tasks and free talk) were carried out on a regular basis over one academic year. Data was then transcribed and grammatical features tagged. Data analysis was performed through distributional analysis which detailed the linguistic environment of each grammatical item across the PT stages. Emergence criterion has been stipulated and applied to locate the acquisition point of each form. At the same time, a further textbook analysis has been conducted to identify the relationship between the instructions and natural acquisition stages. The results have shown that the overall grammatical progression in the subjects’ interlanguage was compatible with the processing hierarchy hypothesized in the PT, regardless of the learners’ first language and language learning experience. Moreover, the acquisition patterns are never altered by the teaching instruction; instead, the acquisition speed has been somehow influenced by the teaching instruction and other factors. One issue which should be addressed is the exceptional cases identified in the study, which require further work in this area. Apart from that, the research has also shown that the adequate tasks are required in language teaching and grammatical structure elicitation. Therefore, four tasks have been designed and tested across the proposed Chinese processing hierarchy for the benefit of Chinese L2 learners.
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Libri sul tema "Processability"

1

Pienemann, Manfred, e Jörg-U. Keßler, a cura di. Studying Processability Theory. Amsterdam: John Benjamins Publishing Company, 2011. http://dx.doi.org/10.1075/palart.1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Ghosh, Anup K., e Mayank Dwivedi. Processability of Polymeric Composites. New Delhi: Springer India, 2020. http://dx.doi.org/10.1007/978-81-322-3933-8.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Lenzing, Anke, Howard Nicholas e Jana Roos, a cura di. Widening Contexts for Processability Theory. Amsterdam: John Benjamins Publishing Company, 2019. http://dx.doi.org/10.1075/palart.7.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

1951-, Pienemann Manfred, a cura di. Cross-linguistic aspects of processability theory. Amsterdam: J.Benjamins Pub. Co., 2005.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Pienemann, Manfred, a cura di. Cross-Linguistic Aspects of Processability Theory. Amsterdam: John Benjamins Publishing Company, 2005. http://dx.doi.org/10.1075/sibil.30.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Studying processability theory: An introductory textbook. Amsterdam: John Benjamins Pub. Company, 2011.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Baten, Kristof, Aafke Buyl, Katja Lochtman e Mieke Van Herreweghe, a cura di. Theoretical and Methodological Developments in Processability Theory. Amsterdam: John Benjamins Publishing Company, 2015. http://dx.doi.org/10.1075/palart.4.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Theoretical and methodological developments in processability theory. Amsterdam: John Benjamins Publishing Company, 2015.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Language processing and second language development: Processability theory. Amsterdam: John Benjamins, 1998.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Pienemann, Manfred. Language processing and second language development: Processability theory. Amsterdam: J. Benjamins, 1998.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Capitoli di libri sul tema "Processability"

1

Gooch, Jan W. "Processability". In Encyclopedic Dictionary of Polymers, 590. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_9469.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Brown, Roger. "Processability". In Physical Test Methods for Elastomers, 55–83. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-66727-0_5.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Pienemann, Manfred, e Anke Lenzing. "Processability Theory 1". In Theories in Second Language Acquisition, 162–91. Third edition. | New York, NY: Routledge, 2020. | Series: Second language acquisition research: Routledge, 2020. http://dx.doi.org/10.4324/9780429503986-8.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Pienemann, Manfred. "Developmental schedules". In Studying Processability Theory, 1–11. Amsterdam: John Benjamins Publishing Company, 2011. http://dx.doi.org/10.1075/palart.1.01dev.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Pienemann, Manfred. "Learner variation". In Studying Processability Theory, 12–24. Amsterdam: John Benjamins Publishing Company, 2011. http://dx.doi.org/10.1075/palart.1.02lea.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Pienemann, Manfred. "The psycholinguistic basis of PT". In Studying Processability Theory, 25–48. Amsterdam: John Benjamins Publishing Company, 2011. http://dx.doi.org/10.1075/palart.1.03the.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Pienemann, Manfred. "Explaining developmental schedules". In Studying Processability Theory, 49–62. Amsterdam: John Benjamins Publishing Company, 2011. http://dx.doi.org/10.1075/palart.1.04exp.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Liebner, Mathias, e Manfred Pienemann. "Explaining learner variation". In Studying Processability Theory, 63–73. Amsterdam: John Benjamins Publishing Company, 2011. http://dx.doi.org/10.1075/palart.1.05exp.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Pienemann, Manfred. "L1 transfer". In Studying Processability Theory, 74–82. Amsterdam: John Benjamins Publishing Company, 2011. http://dx.doi.org/10.1075/palart.1.06lit.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Keßler, Jörg-U., e Manfred Pienemann. "Research methodology". In Studying Processability Theory, 83–96. Amsterdam: John Benjamins Publishing Company, 2011. http://dx.doi.org/10.1075/palart.1.07res.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Processability"

1

Yang, Xiaoli, e Andrea Sedgwick. "Investigation of Interburden Dilution on Oil Sands Processability". In SPE Heavy Oil Conference-Canada. Society of Petroleum Engineers, 2014. http://dx.doi.org/10.2118/170063-ms.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Müller, D., e C. Bonten. "Investigation on the processability of sheets for thermoforming". In FRACTURE AND DAMAGE MECHANICS: Theory, Simulation and Experiment. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0028733.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Ben Amira, Ahmed, Guillaume Lepelletier, Philippe Vialletelle, Stephane Dauzere-Peres, Claude Yugma e Philippe Lalevee. "Modeling complex processability constraints in high-mix semiconductor manufacturing". In 2013 Winter Simulation Conference - (WSC 2013). IEEE, 2013. http://dx.doi.org/10.1109/wsc.2013.6721732.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

SOMMER, DREW E., ANTHONY J. FAVALORO e R. BYRON PIPES. "Prepreg Platelet Morphology and Scale Effects on Molding Processability". In American Society for Composites 2017. Lancaster, PA: DEStech Publications, Inc., 2017. http://dx.doi.org/10.12783/asc2017/15368.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Sheima, Yauhen, Johannes von Szczepanski, Patrick Danner, Francis Owusu, Mihail Iacob, Elena Perju, Frank Nüesch e Dorina M. Opris. "High dielectric permittivity elastomers: synthesis, processability, and device manufacturing". In Electroactive Polymer Actuators and Devices (EAPAD) XXIV, a cura di John D. Madden, Iain A. Anderson e Herbert R. Shea. SPIE, 2022. http://dx.doi.org/10.1117/12.2610572.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Wiggins, J., e L. Hamernik. "Modular Main-Chain Polybenzoxazines: Thermoplastic Processability with Thermoset Performance". In SAMPE 2022. NA SAMPE, 2022. http://dx.doi.org/10.33599/nasampe/s.22.0709.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Wiggins, J., e A. Fritz. "Examining Isocyanate Reactivity and Ambinet Processability on Polyurethane Formation". In SAMPE 2022. NA SAMPE, 2022. http://dx.doi.org/10.33599/nasampe/s.22.0712.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Berger, L. M., S. Thiele, P. Vuoristo, T. Mäntylä, H. Keller, E. Proß e R. Scholl. "Titanium Carbide-Based Powders and Coatings – Compositions, Processability and Properties". In ITSC2002, a cura di C. C. Berndt e E. Lugscheider. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2002. http://dx.doi.org/10.31399/asm.cp.itsc2002p0727.

Testo completo
Abstract (sommario):
Abstract This paper provides a short summary of the information that can be found in the literature on the preparation and structure of titanium carbide (TiC) wettable powders. From the work that has been done, it can be concluded that TiC-based coatings can be tailored for applications where complex stress profiles are encountered. Paper includes a German-language abstract.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Otero, Toribio F., Sara Villanueva, Enrique Brillas e Jose Carrasco. "Processability of poly 2,5-di-(-2-thienyl)pyrrole, poly(SNS)". In 1999 Symposium on Smart Structures and Materials, a cura di Yoseph Bar-Cohen. SPIE, 1999. http://dx.doi.org/10.1117/12.349687.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Badrinarayanan, P., H. Qian e T. Runk. "Epoxy Resins for Downhole Composites: Breaking the Performance – Processability Paradigm". In CAMX 2019. NA SAMPE, 2019. http://dx.doi.org/10.33599/nasampe/c.19.0672.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Processability"

1

Lambert, S. L., e D. S. Kim. Tank waste remediation system high-level waste feed processability assessment report. Office of Scientific and Technical Information (OSTI), dicembre 1994. http://dx.doi.org/10.2172/48609.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Lambert, S. L., e G. E. ,. Westinghouse Hanford Stegen. Tank waste remediation system phase I high-level waste feed processability assessment report. Office of Scientific and Technical Information (OSTI), agosto 1996. http://dx.doi.org/10.2172/658876.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Kirka, Michael, Yousub Lee, Daniel Ryan e David Adair. Assessment of High Gamma Prime Ni-base Superalloy Processability, Geometric Accuracy, and Component Fabricability. Office of Scientific and Technical Information (OSTI), novembre 2019. http://dx.doi.org/10.2172/1659625.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Maio, Vince. Continuing the Validation of CCIM Processability for Glass Ceramic HLLW Forms: Plan for Test AFY14CCIM-GC1. Office of Scientific and Technical Information (OSTI), aprile 2014. http://dx.doi.org/10.2172/1164841.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

WOODHAM, WESLEY. EVALUATION OF SLUDGE SOLIDS RETURNS IMPACTS ON SLUDGE BATCH 10 FLAMMABILITY, GLASS QUALITY, AND GLASS PROCESSABILITY. Office of Scientific and Technical Information (OSTI), febbraio 2022. http://dx.doi.org/10.2172/1855348.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Panfil, Yossef E., Meirav Oded, Nir Waiskopf e Uri Banin. Material Challenges for Colloidal Quantum Nanostructures in Next Generation Displays. AsiaChem Magazine, novembre 2020. http://dx.doi.org/10.51167/acm00008.

Testo completo
Abstract (sommario):
The recent technological advancements have greatly improved the quality and resolution of displays. Yet, issues like full-color gamut representation and the long-lasting durability of the color emitters require further progression. Colloidal quantum dots manifest an inherent narrow spectral emission with optical stability, combined with various chemical processability options which will allow for their integration in display applications. Apart from their numerous advantages, they also present unique opportunities for the next technological leaps in the field.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Maio, Vince. Initiating the Validation of CCIM Processability for Multi-phase all Ceramic (SYNROC) HLW Form: Plan for Test BFY14CCIM-C. Office of Scientific and Technical Information (OSTI), agosto 2014. http://dx.doi.org/10.2172/1170310.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Sears, P. L., D. J. Patmore e W. H. Dawson. Upgrading Athabasca bitumen vacuum bottoms using CANMET hydrocracking: long term processability at 90%+ pitch conversion. Runs 89-CG-10 to 13. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1989. http://dx.doi.org/10.4095/304435.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Sears, P. L., W. H. Dawson e T. J. W. de Bruijn. Upgrading of IPPL vacuum bottoms by the CANMET process. runs 84-cg-29 to 35: the effect of feed cutpoint on processability. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1986. http://dx.doi.org/10.4095/302635.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Dawson, W. H., F. T. T. Ng e P. L. Sears. Upgrading Venezuelan blend 24 vacuum bottoms by CANMET hydrocracking - processability improvements through effective control of reactor toluene insolubles (runs 83-cg-319 to 332). Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1985. http://dx.doi.org/10.4095/302541.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Ti possono interessare anche gli elenchi estesi di opere sul tema "Processability":
Articoli di riviste Tesi Libri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia