Letteratura scientifica selezionata sul tema "Press fitting"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Press fitting".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Press fitting"
Nwe, Theingi, e Monsak Pimsarn. "Railway Axle and Wheel Assembly Press-Fitting Force Characteristics and Holding Torque Capacity". Applied Sciences 11, n. 19 (23 settembre 2021): 8862. http://dx.doi.org/10.3390/app11198862.
Testo completoSaito, Ryoichi, Nao-Aki Noda, Yoshikazu Sano, Arata Miyagi e Tomoaki Okamura. "Fatigue strength improvement of roller chain by press fitting between pin and plate". International Journal of Modern Physics B 35, n. 14n16 (14 maggio 2021): 2140024. http://dx.doi.org/10.1142/s0217979221400245.
Testo completoOlson, Jonas. "The Personal and the Fitting". Journal of Moral Philosophy 11, n. 3 (2 maggio 2014): 341–52. http://dx.doi.org/10.1163/17455243-01103001.
Testo completoNwe, Theingi, e Monsak Pimsarn. "Deterministic Stress Intensity Factor of a Railway Axle under Adverse Running Condition". Materials Science Forum 1109 (14 dicembre 2023): 165–71. http://dx.doi.org/10.4028/p-k75d6r.
Testo completoYAMASHITA, Yoshihiro. "Alternative Press Fitting Using Laser for Automotive Components". Review of Laser Engineering 35, n. 12 (2007): 799–805. http://dx.doi.org/10.2184/lsj.35.799.
Testo completoSATO, Takashi, Daisuke MIZUSHIMA, Hiroya MURAKAMI e Naoto OHTAKE. "Press Fitting and Mechanical Clinching by Ultrasonic Vibration". Journal of the Japan Society for Technology of Plasticity 53, n. 618 (2012): 611–15. http://dx.doi.org/10.9773/sosei.53.611.
Testo completoCristofolini, L., C. Metti e M. Viceconti. "Strain patterns induced by press-fitting and by an external load in hip arthroplasty: A photoelastic coating study on bone models". Journal of Strain Analysis for Engineering Design 38, n. 4 (1 maggio 2003): 289–301. http://dx.doi.org/10.1243/03093240360692887.
Testo completoKurniawan, Shiddiq, e Qomariyatus Sholihah. "ANALISIS KEANDALAN (RELIABILITY) PADA MESIN SCREW PRESS (STUDI KASUS : PT. PERKEBUNAN NUSANTARA XIII)". JTAM ROTARY 1, n. 1 (1 aprile 2019): 55. http://dx.doi.org/10.20527/jtam_rotary.v1i1.1403.
Testo completoCulhane-Pera, Kathleen A. "Belonging: The Social Dynamics of Fitting In as Experienced by Hmong Refugees in Germany and Texas, by Faith G. Nibbs". Refuge: Canada's Journal on Refugees 31, n. 2 (2 dicembre 2015): 98–100. http://dx.doi.org/10.25071/1920-7336.40315.
Testo completoPedroti, Leonardo Gonçalves, S. N. Monteiro, C. M. Vieira e J. Alexandre. "Properties and Microstructure of Clay Ceramics with Granite Waste for Press-Molded Structural Block". Materials Science Forum 727-728 (agosto 2012): 809–14. http://dx.doi.org/10.4028/www.scientific.net/msf.727-728.809.
Testo completoTesi sul tema "Press fitting"
Coban, Huseyin. "Assembly via press fitting knurled components in drivetrain applications". Thesis, Glasgow Caledonian University, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.518241.
Testo completoEgüz, Izzettin Osman. "Hydraulic press construction for fitting the bearings to the housing". Thesis, Växjö University, School of Technology and Design, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:vxu:diva-2125.
Testo completoThis report was written as a result of a Bachelor Degree Project, together with Swepart Transmission AB. The report contains the construction of a hydraulic press for the assembly operation.
The project started with a new construction of a hydraulic press for the bearings’ assembly. The goal within the thesis work was to fit the three bearings to the housing by only one press motion. This operation should be very safety because of the sensitive tolerance at the bearings and housing. Construction of the cylinders, rams and bolster were the most important parts at this project because this parts’ functions are very important for this assembly.
The next step of this thesis was to calculate the hydraulic press components’ parameters and then choose the suitable components. The focus was to choose more useful and reliable components.
The hydraulic press was modeled in the CAD program Solid Works and 2D technical drawing was drawn in the Autocad. The frame material was chosen and the frame was analysised in the Solid Works.
Hendrycks, Baptiste. "Modélisation de l'assemblage roue/essieu ferroviaire et de sa tenue en fatigue sous chargement cyclique". Electronic Thesis or Diss., Université de Lille (2022-....), 2023. http://www.theses.fr/2023ULILN049.
Testo completoThe objective of this thesis is to propose numerical models allowing a better understanding of the fatigue behavior of the railway wheel-axle assembly.A first model simulates the press fit operation in the assembly of a railway axle and wheel. A particular attention was paid to the friction between the wheel and the axle, which notably made it possible to show a dependence of the friction factor on the contact pressure. Also, the simulation highlights the creation of a geometric singularity at the start of the operation having an influence on the distribution of stresses in the structure.Then, a model simulates the multiaxial cyclic stress on a scale 1 test specimen wheel/axle assembly. A behavior model for the EA1N steel, used for the axles, was developed in order to be used for both monotonic and cyclic problems. This model, with a high loading level, shows a significant deformation of the wheel seat with the contact opening.The skipped cycles method was chosen in order to quickly calculate a stabilized mechanical state. The use of this method initially on a simplified wheel/axle assembly, then on a real case shows good precision of the results despite a dependence on local refinement and the developed material behavior which can constrain the calculation time.Finally, we calculate the fatigue strength of the structure with the application of a fatigue criterion. We also propose a discussion based on loading paths, in particular on the appearance of alternating shear on the wheel seat
Libri sul tema "Press fitting"
Spazi Atti/fitting Spaces: 7 artisti italiani alle prese con la trasformazione dei luoghi/7 Italian Artists Grappling with The Transformation Of Places. 5 Continents, 2005.
Cerca il testo completoCapitoli di libri sul tema "Press fitting"
Tres, Paul A. "Press Fitting". In Designing Plastic Parts for Assembly, 167–215. München: Carl Hanser Verlag GmbH & Co. KG, 2014. http://dx.doi.org/10.3139/9781569905562.006.
Testo completoTres, Paul A. "Press Fitting". In Designing Plastic Parts for Assembly, 169–217. München: Carl Hanser Verlag GmbH & Co. KG, 2017. http://dx.doi.org/10.3139/9781569906699.006.
Testo completoTres, Paul A. "Press Fitting". In Designing Plastic Parts for Assembly, 187–235. 9a ed. München: Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.3139/9781569908211.006.
Testo completoTres, Paul A. "Press Fitting". In Designing Plastic Parts for Assembly, 187–235. München, Germany: Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.1007/978-1-56990-821-1_6.
Testo completoLaurenczy, Csaba, Damien Berlie e Jacques Jacot. "Ultrasonic Press–Fitting: A New Assembly Technique". In Lecture Notes in Computer Science, 22–29. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-45586-9_4.
Testo completoSaad, Sofiane, Vincent Magnier, Philippe Dufrenoy, Eric Charkaluk e Franc̨ois Demilly. "Numerical Chain of Forging Railway Axle and Wheel Press Fitting Operation". In Design and Modeling of Mechanical Systems - II, 115–27. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-17527-0_12.
Testo completoHan, Xiao, Cheng-Hsuan Yang, Yuxiang Chen e Alejandra Hernandez Sanchez. "A Robotic Method to Insert Batt Insulation into Light-Frame Wood Wall for Panel Prefabrications". In CONVR 2023 - Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality, 594–604. Florence: Firenze University Press, 2023. http://dx.doi.org/10.36253/10.36253/979-12-215-0289-3.58.
Testo completoHan, Xiao, Cheng-Hsuan Yang, Yuxiang Chen e Alejandra Hernandez Sanchez. "A Robotic Method to Insert Batt Insulation into Light-Frame Wood Wall for Panel Prefabrications". In CONVR 2023 - Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality, 594–604. Florence: Firenze University Press, 2023. http://dx.doi.org/10.36253/979-12-215-0289-3.58.
Testo completo"6 Press Fitting". In Designing Plastic Parts for Assembly, 199–248. 10a ed. München: Carl Hanser Verlag GmbH & Co. KG, 2024. http://dx.doi.org/10.3139/9781569909393.006.
Testo completoAllen, Gene. "“Fitting Himself for the Newspaper Profession”". In Mr. Associated Press, 1–11. University of Illinois Press, 2023. http://dx.doi.org/10.5622/illinois/9780252045103.003.0001.
Testo completoAtti di convegni sul tema "Press fitting"
Liu, Yapei, Zhijun Wang, Zhongxun Xu, Hao Zhang, Bo Zhang e Yingqian Du. "550kV GIL Three-pillar Structure Press-fitting Process Simulation". In 2020 IEEE International Conference on High Voltage Engineering and Application (ICHVE). IEEE, 2020. http://dx.doi.org/10.1109/ichve49031.2020.9279655.
Testo completoNie, Xiangyang, Dongxing Chen, Langxi Yuan e Fan Yang. "Design and analysis of automatic press fitting and detection system". In International Conference on Intelligent Manufacturing and Industrial Automation (CIMIA 2022), a cura di Ayush Dogra, Xuexia Ye e Parames Chutima. SPIE, 2022. http://dx.doi.org/10.1117/12.2640670.
Testo completoSand, Christian, Moritz Meiners, Jonathan Eberle e Jorg Franke. "Evaluation of energy measurements for error detection in press-fitting processes". In 2018 2nd International Symposium on Small-scale Intelligent Manufacturing Systems (SIMS). IEEE, 2018. http://dx.doi.org/10.1109/sims.2018.8355294.
Testo completoSharma, Ekansh, Christoph Henke, Alex Mitrevski e Paul G. Plöger. "Adaptive Compliant Robot Control with Failure Recovery for Object Press-Fitting". In 2023 European Conference on Mobile Robots (ECMR). IEEE, 2023. http://dx.doi.org/10.1109/ecmr59166.2023.10256379.
Testo completoYamamoto, Kazuyuki, Yusaku Sakai, Hayato Yoshino e Koji Masumoto. "Development of divided core motor production technique featuring assembly by press fitting". In 2012 2nd International Electric Drives Production Conference (EDPC). IEEE, 2012. http://dx.doi.org/10.1109/edpc.2012.6425116.
Testo completoLei, Jianzhong, Xinglong Zhao, Ke Wang e Hongmei Liu. "Design and Application of Automatic Judgment System for Wheelset Press-Fitting Curve". In 2023 IEEE 11th Joint International Information Technology and Artificial Intelligence Conference (ITAIC). IEEE, 2023. http://dx.doi.org/10.1109/itaic58329.2023.10408959.
Testo completoJin, Y. M., Y. P. Zheng, Z. J. Zhu e Y. S. Zhang. "Research of the Mechanical Performance After Galvanization of Innovative Multilayer Electric Power Fitting". In The 3rd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU2016). WORLD SCIENTIFIC, 2017. http://dx.doi.org/10.1142/9789813207301_0013.
Testo completoNwe, Theingi, e Monsak Pimsarn. "Numerical analysis of the influence of press-fitting on the fatigue life of railway axle". In THE 12TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING (TSME-ICoME 2022). AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0206197.
Testo completoJin, Y. M., Z. J. Wang e Y. S. Zhang. "Investigate of the Mechanical and Heat Transfer Performance of High Strength Steel Hot Stamping Power Fitting Products". In The 2nd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2015). WORLD SCIENTIFIC, 2016. http://dx.doi.org/10.1142/9789813140622_0085.
Testo completoViana, Felipe A. C., e Raphael T. Haftka. "Using Multiple Surrogates for Minimization of the RMS Error in Meta-Modeling". In ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-49240.
Testo completoRapporti di organizzazioni sul tema "Press fitting"
Fabricator killed by ruptured hydraulic press fitting. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, marzo 2006. http://dx.doi.org/10.26616/nioshsface04or015.
Testo completo