Letteratura scientifica selezionata sul tema "Port Chalmers"

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Port Chalmers".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Port Chalmers"

1

de Jong, J. C., D. J. Smith, A. S. Lapedes, I. Donatelli, L. Campitelli, G. Barigazzi, K. Van Reeth et al. "Antigenic and Genetic Evolution of Swine Influenza A (H3N2) Viruses in Europe". Journal of Virology 81, n. 8 (7 febbraio 2007): 4315–22. http://dx.doi.org/10.1128/jvi.02458-06.

Testo completo
Abstract (sommario):
ABSTRACT In the early 1970s, a human influenza A/Port Chalmers/1/73 (H3N2)-like virus colonized the European swine population. Analyses of swine influenza A (H3N2) viruses isolated in The Netherlands and Belgium revealed that in the early 1990s, antigenic drift had occurred, away from A/Port Chalmers/1/73, the strain commonly used in influenza vaccines for pigs. Here we show that Italian swine influenza A (H3N2) viruses displayed antigenic and genetic changes similar to those observed in Northern European viruses in the same period. We used antigenic cartography methods for quantitative analyses of the antigenic evolution of European swine H3N2 viruses and observed a clustered virus evolution as seen for human viruses. Although the antigenic drift of swine and human H3N2 viruses has followed distinct evolutionary paths, potential cluster-differentiating amino acid substitutions in the influenza virus surface protein hemagglutinin (HA) were in part the same. The antigenic evolution of swine viruses occurred at a rate approximately six times slower than the rate in human viruses, even though the rates of genetic evolution of the HA at the nucleotide and amino acid level were similar for human and swine H3N2 viruses. Continuous monitoring of antigenic changes is recommended to give a first indication as to whether vaccine strains may need updating. Our data suggest that humoral immunity in the population plays a smaller role in the evolutionary selection processes of swine H3N2 viruses than in human H3N2 viruses.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

White, Moira. "Aurora and the Otago Museum: the boundary between Antarctic science and seamanship". Polar Record 53, n. 2 (24 gennaio 2017): 192–98. http://dx.doi.org/10.1017/s0032247416000851.

Testo completo
Abstract (sommario):
ABSTRACTSir Ernest Shackleton's Imperial Trans-Antarctic Expedition famously did not succeed in traversing the Antarctic continent from the Weddell Sea to the Ross Sea. It was, nevertheless, an enterprise that engaged the interest of New Zealanders and the rest of the British Empire even as World War I was being fought. When one of the expedition ships, Aurora, broke from her moorings soon after arrival in McMurdo Sound and drifted trapped in pack ice for months, the construction of a temporary jury rudder while still at sea enabled her crew to make their way to Port Chalmers, Dunedin for more extensive repairs in 1916. This paper discusses interactions between the Otago Museum staff and the crew of Aurora while she was in port, the offer of the replaced jury rudder to the museum, and reflects on the concerns and interests that might have contributed to the offer and its rejection.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

De Vleeschauwer, Annebel, Yu Qiu e Kristien Van Reeth. "Vaccination-challenge studies with a Port Chalmers/73 (H3N2)-based swine influenza virus vaccine: Reflections on vaccine strain updates and on the vaccine potency test". Vaccine 33, n. 20 (maggio 2015): 2360–66. http://dx.doi.org/10.1016/j.vaccine.2015.03.031.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Brown, I. H., P. A. Harris e D. J. Alexander. "Serological studies of influenza viruses in pigs in Great Britain 1991–2". Epidemiology and Infection 114, n. 3 (giugno 1995): 511–20. http://dx.doi.org/10.1017/s0950268800052225.

Testo completo
Abstract (sommario):
SUMMARYSamples from a sow serum bank representative of the pig population of Great Britain collected during 1991–2, were examined for antibodies to influenza A, B and C viruses, using viruses which had been isolated from a variety of hosts. For influenza A viruses there was evidence of the continued circulation of ‘classical swine’ H1N1 virus (26%) seroprevalence), and human H3N2 viruses (39%) which are antigenically most closely-related to A/Port Chalmers/1/73 virus. In addition antibodies were detected to A/swine/England/201635/92 (8%), a strain of H3N2 virus which appears to have arisen by antigenic drift from conventional H3N2 swine strains. Specific antibodies (2%) were detected to an H1N1 virus (A/swine/England/195852/92) related most closely to avian H1N1 strains. In tests with human H1N1 and H3N2 viruses, excluding isolates from pigs, the highest seroprevalence was detected to the prevailing strains from the human population. Serological tests with avian H4 and H10, human H2, equine 1 and 2 influenza A viruses were all negative. Seven pigs seropositive by haemagglutination-inhibition, virus neutralization and immunoblotting assays for antibody to influenza B virus, were randomly distributed geographically suggesting that influenza B viruses may be transmitted to pigs but fail to spread. The seroprevalence to influenza C viruses was 9·9% indicating that these viruses are widespread in pigs. These results provide further evidence that the pig can be infected by a number of influenza viruses, some of which may have significance in the epidemiology of human influenza.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Potiki, Megan. "The Face of Nature: An Environmental History of the Otago Peninsula." Journal of New Zealand Studies, NS28 (13 giugno 2019). http://dx.doi.org/10.26686/jnzs.v0ins28.5428.

Testo completo
Abstract (sommario):
It is a tricky thing when one is asked to review a book on something that pervades your existence, your work and your whānau. Jonathan West’s book writes an environmental history of the Otago Peninsula. I have grown up at Ōtākou, the small village at the eastern edge of the Peninsula. I grew up looking across from the east to the west, I close my eyes and could draw an outline of the hills that embrace Aramoana and Port Chalmers. I have been told that Jonathan grew up at Port Chalmers, alternatively looking across from the west to the east, to the Otago Peninsula. This is perhaps where his connections to this piece of land sprung from. His book illustrates his passion for the Otago Peninsula and its interaction with all inhabitants from time immorial.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Ivinson, Karen, Georgia Deliyannis, Leanne McNabb, Lara Grollo, Brad Gilbertson, David Jackson e Lorena E. Brown. "Salivary Blockade Protects the Lower Respiratory Tract of Mice from Lethal Influenza Virus Infection". Journal of Virology 91, n. 14 (26 aprile 2017). http://dx.doi.org/10.1128/jvi.00624-17.

Testo completo
Abstract (sommario):
ABSTRACT It is possible to model the progression of influenza virus from the upper respiratory tract to the lower respiratory tract in the mouse using viral inoculum delivered in a restricted manner to the nose. In this model, infection with the A/Udorn/307/72 (Udorn) strain of virus results ultimately in high viral titers in both the trachea and lungs. In contrast, the A/Puerto Rico/8/34 (PR8) strain causes an infection that is almost entirely limited to the nasal passages. The factors that govern the progression of virus down the respiratory tract are not well understood. Here, we show that, while PR8 virus grows to high titers in the nose, an inhibitor present in the saliva blocks further progression of infection to the trachea and lungs and renders an otherwise lethal dose of virus completely asymptomatic. In vitro, the salivary inhibitor was capable of potent neutralization of PR8 virus and an additional 20 strains of type A virus and two type B strains that were tested. The exceptions were Udorn virus and the closely related H3N2 strains A/Port Chalmers/1/73 and A/Victoria/3/75. Characterization of the salivary inhibitor showed it to be independent of sialic acid and other carbohydrates for its function. This and other biochemical properties, together with its virus strain specificity and in vivo function, indicate that the mouse salivary inhibitor is a previously undescribed innate inhibitory molecule that may have evolved to provide pulmonary protection of the species from fatal influenza virus infection. IMPORTANCE Influenza A virus occasionally jumps from aquatic birds, its natural host, into mammals to cause outbreaks of varying severity, including pandemics in humans. Despite the laboratory mouse being used as a model to study influenza virus pathogenesis, natural outbreaks of influenza have not been reported in the species. Here, we shed light on one mechanism that might allow mice to be protected from influenza in the wild. We show that virus deposited in the mouse upper respiratory tract will not progress to the lower respiratory tract due to the presence of a potent inhibitor of the virus in saliva. Containing inhibitor-sensitive virus to the upper respiratory tract renders an otherwise lethal infection subclinical. This knowledge sheds light on how natural inhibitors may have evolved to improve survival in this species.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Sk, Farooq. "Journal Vol – 15 No -7, July 2020 Journal > Journal > Journal Vol – 15 No -7, July 2020 > Page 6 PERFORMANCE AND EMISSION CHARACTERISTICS OF GASOLINE-ETHANOL BLENDS ON PFI-SI ENGINE Authors: D.Vinay Kumar ,G.Samhita Priyadarsini,V.Jagadeesh Babu,Y.Sai Varun Teja, DOI NO: https://doi.org/10.26782/jmcms.2020.07.00051 admin July 26, 2020 Abstract: Alcohol based fuels can be produced from renewable energy sources and has the potential to reduce pollutant emissions due to their oxygenated nature. Lighter alcohols like ethanol and methanol are easily miscible with gasoline and by blending alcohols with gasoline; a part of conventional fuel can be replaced while contributing to fuel economy. Several researchers tested various ethanol blends on different engine test rigs and identified ethanol as one of the most promising ecofriendly fuels for spark ignition engine. Its properties high octane number, high latent heat of vaporization give better performance characteristics and reduces exhaust emissions compared to gasoline. This paper focuses on studying the effects of blending 50 of ethanol by volume with gasoline as it hardly needs engine modifications. Gasoline (E0) and E50 fuels were investigated experimentally on single-cylinder, four-stroke port fuel injection spark ignition engine by varying engine speed from 1500 rpm to 3500 rpm. Performance Characteristics like torque, brake power, specific fuel consumption, and volumetric efficiency and exhaust emissions such as HC, CO, CO2, NOx were studied.. Keywords: Ethanol,Emissions,Gasoline,Port fuel Injection, Refference: I Badrawada, I. G. G., and A. A. P. Susastriawan. “Influence of ethanol–gasoline blend on performance and emission of four-stroke spark ignition motorcycle.” Clean Technologies and Environmental Policy (2019): 1-6. II Doğan, Battal, et al. “The effect of ethanol-gasoline blends on performance and exhaust emissions of a spark ignition engine through exergy analysis.” Applied Thermal Engineering 120 (2017): 433-443. III Efemwenkiekie, U. Ka, et al. “Comparative Analysis of a Four Stroke Spark Ignition Engine Performance Using Local Ethanol and Gasoline Blends.” Procedia Manufacturing 35 (2019): 1079-1086. IV Galloni, E., F. Scala, and G. Fontana. “Influence of fuel bio-alcohol content on the performance of a turbo-charged, PFI, spark-ignition engine.” Energy 170 (2019): 85-92. V Hasan, Ahmad O., et al. “Impact of changing combustion chamber geometry on emissions, and combustion characteristics of a single cylinder SI (spark ignition) engine fueled with ethanol/gasoline blends.” Fuel 231 (2018): 197-203. VI Mourad, M., and K. Mahmoud. “Investigation into SI engine performance characteristics and emissions fuelled with ethanol/butanol-gasoline blends.” Renewable Energy 143 (2019): 762-771. VII Singh, Ripudaman, et al. “Influence of fuel injection strategies on efficiency and particulate emissions of gasoline and ethanol blends in a turbocharged multi-cylinder direct injection engine.” International Journal of Engine Research (2019): 1468087419838393. VIII Thakur, Amit Kumar, et al. “Progress in performance analysis of ethanol-gasoline blends on SI engine.” Renewable and Sustainable Energy Reviews 69 (2017): 324-340. View Download Journal Vol – 15 No -7, July 2020 CHARACTERIZATION OF MATERIALS FOR CUSTOMIZED AFO USING ADDITIVE MANUFACTURING Authors: Gamini Suresh,Nagarjuna Maguluri,Kunchala Balakrishna, DOI NO: https://doi.org/10.26782/jmcms.2020.07.00052 admin July 26, 2020 Abstract: Neurodegenerative conditions and compressed nerves often cause an abnormal foot drop that affects an individual gait and make it difficult to walk normally. Ankle Foot Orthosis (AFO) is the medical device which is recommended for the patients to improve the walking ability and decrease the risk of falls. Custom AFOs provide better fit, comfort and performance than pre-manufactured ones. The technique of 3D-printing is suitable for making custom AFOs. Fused deposition modelling (FDM) is a 3D-printing method for custom AFO applications with the desired resistance and material deposition rate. Generally, FDM is a thermal process; therefore materials thermal behaviour plays an important role in optimizing the performance of the printed parts. The objective of this study is to evaluate the thermal behaviour of PLA, ABS, nylon and WF-PLA filaments before manufacturing the AFO components using the FDM method. In the study, the sequence of testing materials provides a basic measuring method to investigate AFO device parts thermal stability. Thermal analysis (TG/DTG and DSC) was carried out before 3D printing is to characterize the thermal stability of each material. Keywords: Additive Manufacturing,Ankle Foot Orthosis (AFO),FusedDeposition Modelling,ThermalAnalysis, Refference: I. J. Pritchett, “Foot drop: Background, Anatomy, Pathophysiology,” Medscape Drugs, Dis. Proced., vol. 350, no. apr27_6, p. h1736, 2014. II. J. Graham, “Foot drop: Explaining the causes, characteristics and treatment,” Br. J. Neurosci. Nurs., vol. 6, no. 4, pp. 168–172, 2010. III. Y. Feng and Y. Song, “The Categories of AFO and Its Effect on Patients With Foot Impair: A Systemic Review,” Phys. Act. Heal., vol. 1, no. 1, pp. 8–16, 2017. IV. J. H. P. Pallari, K. W. Dalgarno, J. Munguia, L. Muraru, L. Peeraer, S. Telfer, and J. Woodburn” Design and additive fabrication of foot and ankle-foot orthoses”21st Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, SFF 2010 (2010) 834-845 V. Y. Jin, Y. He, and A. Shih, “Process Planning for the Fuse Deposition Modeling of Ankle-Foot-Othoses,” Procedia CIRP, vol. 42, no. Isem Xviii, pp. 760–765, 2016. VI. R. K. Chen, Y. an Jin, J. Wensman, and A. Shih, “Additive manufacturing of custom orthoses and prostheses-A review,” Addit. Manuf., vol. 12, pp. 77–89, 2016. VII. A. D. Maso and F. Cosmi, “ScienceDirect 3D-printed ankle-foot orthosis : a design method,” Mater. Today Proc., vol. 12, pp. 252–261, 2019. VIII. B. Yuan et al., “Designing of a passive knee-assisting exoskeleton for weight-bearing,” in Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 2017, vol. 10463 LNAI, pp. 273–285. IX. R. Spina, B. Cavalcante, and F. Lavecchia, “Diment LE, Thompson MS, Bergmann JHM. Clinical efficacy and effectiveness of 3D printing: a systematic review.,” AIP Conf. Proc., vol. 1960, 2018. X. M. Srivastava, S. Maheshwari, T. K. Kundra, and S. Rathee, “ScienceDirect Multi-Response Optimization of Fused Deposition Modelling Process Parameters of ABS Using Response Surface Methodology ( RSM ) -Based Desirability Analysis,” Mater. Today Proc., vol. 4, no. 2, pp. 1972–1977, 2017. XI. E. Malekipour, S. Attoye, and H. El-Mounayri, “Investigation of Layer Based Thermal Behavior in Fused Deposition Modeling Process by Infrared Thermography,” Procedia Manuf., vol. 26, pp. 1014–1022, 2018. XII. A. Patar, N. Jamlus, K. Makhtar, J. Mahmud, and T. Komeda, “Development of dynamic ankle foot orthosis for therapeutic application,” Procedia Eng., vol. 41, no. Iris, pp. 1432–1440, 2012. XIII. Y. A. Jin, H. Li, Y. He, and J. Z. Fu, “Quantitative analysis of surface profile in fused deposition modelling,” Addit. Manuf., vol. 8, pp. 142–148, 2015. XIV. M. Walbran, K. Turner, and A. J. McDaid, “Customized 3D printed ankle-foot orthosis with adaptable carbon fibre composite spring joint,” Cogent Eng., vol. 3, no. 1, pp. 1–11, 2016. XV. N. Wierzbicka, F. Górski, R. Wichniarek, and W. Kuczko, “The effect of process parameters in fused deposition modelling on bonding degree and mechanical properties,” Adv. Sci. Technol. Res. J., vol. 11, no. 3, pp. 283–288, 2017. XVI. S. Farah, D. G. Anderson, and R. Langer, “Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review,” Adv. Drug Deliv. Rev., vol. 107, pp. 367–392, 2016. XVII. S. Wojtyła, P. Klama, and T. Baran, “Is 3D printing safe ? Analysis of the thermal treatment of thermoplastics : ABS , PLA , PET , and,” vol. 9624, no. April, 2017. XVIII. G. Cicala et al., “Polylactide / lignin blends,” J. Therm. Anal. Calorim., 2017. XIX. S. Y. Lee, I. A. Kang, G. H. Doh, H. G. Yoon, B. D. Park, and Q. Wu, “Thermal and mechanical properties of wood flour/talc-filled polylactic acid composites: Effect of filler content and coupling treatment,” J. Thermoplast. Compos. Mater., vol. 21, no. 3, pp. 209–223, 2008. XX. Y. Tao, H. Wang, Z. Li, P. Li, and S. Q. Shi, “Development and application ofwood flour-filled polylactic acid composite filament for 3d printing,” Materials (Basel)., vol. 10, no. 4, pp. 1–6, 2017. XXI. D. Lewitus, S. McCarthy, A. Ophir, and S. Kenig, “The effect of nanoclays on the properties of PLLA-modified polymers Part 1: Mechanical and thermal properties,” J. Polym. Environ., vol. 14, no. 2, pp. 171–177, 2006. XXII. H. J. Chung, E. J. Lee, and S. T. Lim, “Comparison in glass transition and enthalpy relaxation between native and gelatinized rice starches,” Carbohydr. Polym., vol. 48, no. 3, pp. 287–298, 2002. View Download Journal Vol – 15 No -7, July 2020 CFD STUDIES OF MIXING BEHAVIOR OF INERT SAND WITH BIOMASS IN FLUIDIZED BED Authors: B.J.M.Rao,K.V.N.S.Rao, DOI NO: https://doi.org/10.26782/jmcms.2020.07.00053 admin July 26, 2020 Abstract: Agriculture deposits, which remains unused and often causes ecological problems, could play an important role as an energy source to meet energy needs in developing countries ‘ rural areas. Moreover, energy levels in these deposits are low and need to be elevated by introducing efficient operative conversion technologies to utilize these residues as fuels. In this context, the utilization of a fluidized bed innovation enables a wide range of non-uniform-sized low-grade fuels to be effectively converted into other forms of energy.This study was undertaken to evaluate the effectiveness of fluidized conversion method for transformation of agricultural by-products such as rice husk, sawdust, and groundnut shells into useful energy. The present investigation was conducted to know the mixing characteristics of sand and fuel have been found by conducting experiments with mixing ratio of rice husk (1:13), saw dust(1:5) and groundnut shells (1:12), the variation of particle movement in the bed and mixing characteristics are analyzed. The impact of sand molecule size on the fluidization speed of two biofuel and sand components is studied and recommended for groundnut shells using a sand molecule of 0.6 mm size and for rice husk, sawdust 0.4 mm sand particle size. Also, establish that the particle size of sand has a significant effect on mingling features in case of sawdust. In the next part of the investigation, the CFD simulations of the fluidized bed are done to investigate the mixing behavior of sand and biomass particles. A set of simulations are conducted by ANSYS FLUENT16; the state of the bed is the same as that of the test. The findings were presented with the volume fraction of sand and biomass particles in the form of contour plots. Keywords: Biomass,sand,mixing behavior,Volume Fraction,CFD model, Refference: I Anil Tekale, Swapna God, Balaji Bedre, Pankaj Vaghela, Ganesh Madake, Suvarna Labade (2017), Energy Production from Biomass: Review, International Journal of Innovative Science and Research Technology, Volume 2, Issue 10, ISSN No: – 2456 – 2165. II Anil Kumar, Nitin Kumar , Prashant Baredar , Ashish Shukla (2015), A review on biomass energy resources, potential, conversion and policy in India, Renewable and Sustainable Energy, Reviews 45-530-539. III Zhenglan Li, ZhenhuaXue (2015), Review of Biomass Energy utilization technology, 3rd International Conference on Material, Mechanical and Manufacturing Engineering. IV Abdeen Mustafa Omer (2011), Biomass energy resources utilisation and waste management, Journal of Agricultural Biotechnology and Sustainable Development Vol. 3(8), pp. 149 -170 V Rijul Dhingra, Abhinav Jain, Abhishek Pandey, and Srishti Mahajan (2014), Assessment of Renewable Energy in India, International Journal of Environmental Science and Development, Vol. 5, No. 5. VI Paulina Drożyner, Wojciech Rejmer, Piotr Starowicz,AndrzejKlasa, Krystyna A. Skibniewska (2013), Biomass as a Renewable Source of Energy, Technical Sciences 16(3), 211–220. VII Souvik Das, Swati Sikdar (2016), A Review on the Non-conventional Energy Sources in Indian Perspective, International Research Journal of Engineering and Technology (IRJET), Volume: 03 Issue: 02. VIII Maninder, Rupinderjit Singh Kathuria, Sonia Grover, Using Agricultural Residues as a Biomass Briquetting: An Alternative Source of Energy, IOSR Journal of Electrical and Electronics Engineering (IOSRJEEE), ISSN: 2278-1676 Volume 1, Issue 5 (July-Aug. 2012), PP 11-15. IX H.B.Goyal, DiptenduldDeal, R.C.Saxena (2006) Bio-fuels from thermochemical conversion of renewable resources: A review, Renewable and Sustainable Energy Reviews, Volume 12, Issue 2Pages 504-517. X Digambar H. Patil, J. K. Shinde(2017) A Review Paper on Study of Bubbling Fluidized Bed Gasifier, International Journal for Innovative Research in Science & Technology, Volume 4, Issue 4 XI Neil T.M. Duffy, John A. Eaton (2013) Investigation of factors affecting channelling in fixed-bed solid fuel combustion using CFD, Combustion and Flame 160, 2204–2220. XII Xing Wu, Kai Li, Feiyue and Xifeng Zhu (2017), Fluidization Behavior of Biomass Particles and its Improvement in a Cold Visualized Fluidized, Bio Resources 12(2), 3546-3559. XIII N.G. Deen, M. Van Sint Annaland, M.A. Van der Hoef, J.A.M. Kuipers (2007), Reviewof discrete particle modeling of fluidized beds, Chemical Engineering Science 62, 28 – 44. XIV BaskaraSethupathySubbaiah, Deepak Kumar Murugan, Dinesh Babu Deenadayalan, Dhamodharan.M.I (2014), Gasification of Biomass Using Fluidized Bed, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 2. XV Priyanka Kaushal, Tobias Pröll and Hermann Hofbauer, Modelling and simulation of the biomass fired dual fluidized bed gasifier at Guessing/Austria. XVI Dawit DiribaGuta (2012), Assessment of Biomass Fuel Resource Potential and Utilization in Ethiopia: Sourcing Strategies for Renewable Energies, International Journal of Renewable Energy Research, Vol.2, and No.1. View Download Journal Vol – 15 No -7, July 2020 AN APPROACH FOR OPTIMISING THE FLOW RATE CONDITIONS OF A DIVERGENT NOZZLE UNDER DIFFERENT ANGULAR CONDITIONS Authors: Lam Ratna Raju ,Ch. Pavan Satyanarayana,Neelamsetty Vijaya Kavya, DOI NO: https://doi.org/10.26782/jmcms.2020.07.00054 admin July 26, 2020 Abstract: A spout is a device which is used to offer the guidance to the gases leaving the burning chamber. Spout is a chamber which has a capability to change over the thermo-compound essentials created within the ignition chamber into lively vitality. The spout adjustments over the low speed, excessive weight, excessive temperature fuel in the consuming chamber into rapid gasoline of decrease weight and low temperature. An exciting spout is used if the spout weight volume is superior vehicles in supersonic airplane machines commonly combine a few sort of a distinctive spout. Our exam is surpassed on the use of programming like Ansys Workbench for arranging of the spout and Fluent 15.0 for separating the streams inside the spout. The events of staggers for the pipe formed spouts have been seen close by trade parameters for numerous considered one of a kind edges. The parameters underneath recognition are differentiated and that of shape spout for singular terrific edges by using keeping up the gulf, outlet and throat width and lengths of joined together and diverse quantities as same. The simultaneous component and throat expansiveness are kept regular over the cases.The surprise of stun became envisioned and the effects exhibited near closeness in direction of motion of Mach circle and its appearance plans as exposed in numerous preliminary considers on advancement in pipe molded particular spouts with assorted edges four°,7°, 10°, Occurrence of stun is seen with higher special factors Keywords: Nozzle,Supersonic Rocket Engine,Divergent edges, Refference: I. Varun, R.; Sundararajan,T.; Usha,R.; Srinivasan,ok.; Interaction among particle-laden under increased twin supersonic jets, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 2010 224: 1005. II. Pandey,K.M.; Singh, A.P.; CFD Analysis of Conical Nozzle for Mach 3 at Various Angles of Divergence with Fluent Software, International Journal of Chemical Engineering and Applications, Vol. 1, No. 2, August 2010, ISSN: 2010-0221. III. Natta, Pardhasaradhi.; Kumar, V.Ranjith.; Rao, Dr. Y.V. Hanumantha.; Flow Analysis of Rocket Nozzle Using Computational Fluid Dynamics (Cfd), International Journal of Engineering Research and Applications (IJERA), ISSN: 2248-9622,Vol. 2, Issue five, September- October 2012, pp.1226-1235. IV. K.M. Pandey, Member IACSIT and A.P. Singh. K.M.Pandey, Member, IACSIT and S.K.YadavK.M.Pandey and S.K.Yadav, ―CFD Analysis of a Rocket Nozzle with Two Inlets at Mach2.1, Journal of Environmental Research and Development, Vol 5, No 2, 2010, pp- 308-321. V. Shigeru Aso, ArifNur Hakim, Shingo Miyamoto, Kei Inoue and Yasuhiro Tani “ Fundamental examine of supersonic combustion in natural air waft with use of surprise tunnel” Department of Aeronautics and Astronautics, Kyushu University, Japan , Acta Astronautica 57 (2005) 384 – 389. VI. P. Padmanathan, Dr. S. Vaidyanathan, Computational Analysis of Shockwave in Convergent Divergent Nozzle, International Journal of Engineering Research and Applications (IJERA), ISSN: 2248-9622 , Vol. 2, Issue 2,Mar-Apr 2012, pp.1597-1605. VII. Adamson, T.C., Jr., and Nicholls., J.A., “On the shape of jets from Highly below improved Nozzles into Still Air,” Journal of the Aerospace Sciences, Vol.26, No.1, Jan 1959, pp. Sixteen-24. VIII. Lewis, C. H., Jr., and Carlson, D. J., “Normal Shock Location in underneath increased Gas and Gas particle Jets,” AIAA Journal, Vol 2, No.4, April 1964, pp. 776-777. Books IX. Anderson, John D.Jr.; Modern Compressible Flow with Historical Perspective, Third edition, 2012 X. Versteeg. H.; Malalasekra.W.; An Introduction to Computational Fluid Dynamics The Finite Volume Method, Second Edition,2009. XI. H.K.Versteeg and W.Malala Sekhara, “An introduction to Computational fluid Dynamics”, British Library cataloguing pub, 4th version, 1996. XII. Lars Davidson, “An introduction to turbulenceModels”, Department of thermo and fluid dynamics, Chalmers college of era, Goteborg, Sweden, November, 2003. XIII. Karna s. Patel, “CFD analysis of an aerofoil”, International Journal of engineering studies,2009. XIV. K.M. Pandey, Member IACSIT and A.P. Singh “CFD Analysis of Conical Nozzle for Mach 3 at Various Angles of Divergence with Fluent Software,2017. XV. P. Parthiban, M. Robert Sagayadoss, T. Ambikapathi, Design And Analysis Of Rocket Engine Nozzle by way of the usage of CFD and Optimization of Nozzle parameters, International Journal of Engineering Research, Vol.Three., Issue.5., 2015 (Sept.-Oct.). View Download Journal Vol – 15 No -7, July 2020 DESIGN OPTIMIZATION OF DRIVE SHAFT FOR AN AUTOMOBILE APPLICATIONS Authors: Govindarajulu Eedara,P. N. Manthru Naik, DOI NO: https://doi.org/10.26782/jmcms.2020.07.00055 admin July 26, 2020 Abstract: The driveshaft is a mechanical instrument that is used in automobiles. The other name of the drive shaft is driveshaft is prop shaft. It has one long cylindrical structure consist of two universal joints. By using the driveshaft it transfers the rotary motion to the differential by using the helical gearbox. By using this rotary motion the rare wheels will run. The 3dimensional Model of automobile drive Shaft is designed using CATIA parametric which enables product development processes and thereby brings about an optimum design. Now a day’s steel is using the best material for the driveshaft.In this paper replacing the composite materials (Kevlar, e-glass epoxy) instead of steel material and itreduces a considerable amount of weight when compared to the conventional steel shaft. The composite driveshaft have high modulus is designed by using CATIA software and tested in ANSYS for optimization of design or material check and providing the best datebook Keywords: The driveshaft ,CATIA,automobile,steel,composite materials,ANSYS,Kevla,e-glass epoxy, Refference: I A.R. Abu Talib, Aidy Ali, Mohamed A. Badie, Nur Azienda Che Lah, A.F. Golestaneh Developing a hybrid, carbon/glass-fiber-reinforced, epoxy composite automotive driveshaft, Material and Design, volume31, 2010, pp 514 – 521 II ErcanSevkat, Hikmet Tumer, Residual torsional properties of composite shafts subjected to impact Loadings, Materials, and design, volume – 51, 2013, pp -956-967. III H. Bayrakceken, S. Tasgetiren, I. Yavuz two cases of failure in the power transmission system on vehicles: A Universal joint yoke and a drive shaft, volume-14,2007,pp71. IV H.B.H. Gubran, Dynamics of hybrid shafts, Mechanics Research communication, volume – 32, 2005, pp – 368-374. V Shaw D, Simitses DJ, SheinmanI. Imperfection sensitivity of laminated cylindrical shells in torsion and axial compression. ComposStruct 1985; 4(3) pp:35–60. View Download Journal Vol – 15 No -7, July 2020 EXPERIMENTAL EVALUATION OF AN SI ENGINE USING E10 EQUIVALENT TERNARY GASOLINE- ALCOHOL BLENDS". JOURNAL OF MECHANICS OF CONTINUA AND MATHEMATICAL SCIENCES 15, n. 7 (26 luglio 2020). http://dx.doi.org/10.26782/jmcms.2020.07.00056.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Tesi sul tema "Port Chalmers"

1

Fitzpatrick, Peter Gerard Media Arts College of Fine Arts UNSW. "The Doulgas Summerland collection". 2007. http://handle.unsw.edu.au/1959.4/44257.

Testo completo
Abstract (sommario):
The Douglas Summerland Collection is a fictional "monographically based history"1. In essence this research is concerned with the current debates about history recording, authenticity of the photograph, methods of history construction and how the audience digests new 'knowledge'. The narrative for this body of work is drawn from a small album of maritime photographs discovered in 2004 within the archives of the Port Chalmers Regional Maritime Museum in New Zealand. The album contains vernacular images of life onboard several sailing ships from the nineteenth and twentieth centuries, including the DH Sterling and the William Mitchell. Through investigating the'truth' systems promoted by the photograph within the presentations of histories this research draws a link between the development of colonialism and the perception of photography. It also deliberates on how 'truth' perception is still a major part of an audience's knowledge base. 1. Anne-Marie Willis Picturing Australia: A History of Photography, Angus & Robertson Publishers, London. 1988:253
Gli stili APA, Harvard, Vancouver, ISO e altri

Libri sul tema "Port Chalmers"

1

Church, Ian. Last port to Antarctica: Dunedin and Port Chalmers : 100 years of service. Dunedin [N.Z.]: Otago Heritage Books, 1997.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Johnston, George Burke. Thomas Chalmers McCorvey: Teacher, poet, historian. Blacksburg, Va: White Rhinoceros Press, 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Johnston, George B. Thomas Chalmers McCorvey: Teacher, Poet, Historian. Pocahontas Press, 2001.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Johnston, George B. Thomas Chalmers McCorvey: Teacher, Poet, Historian. Pocahontas Press, 2001.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Capitoli di libri sul tema "Port Chalmers"

1

Murray, Chris. "‘Better Fifty Years of Europe than a Cycle of Cathay’". In China from the Ruins of Athens and Rome, 133–68. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780198767015.003.0005.

Testo completo
Abstract (sommario):
The classical universe allows Tennyson perspective on China. While ‘Locksley Hall’ appears to endorse British progress and deride China, the metre distances the poet from modernity: Tennyson’s line has probably Persian or ancient Greek origins. Tennyson’s patriotism celebrates ancient values but is suspicious of Victorian progress. ‘Recollections of the Arabian Nights’ considers the paradox that Britain deems Asia both accomplished and stagnant. Britain was culpable for hindering China as the East India Company became increasingly reliant on the illegal opium-trade. In the ‘Lotos-Eaters’ Tennyson responds to the opium crisis in China as well as addiction in his family. Sara Coleridge wrote her own version of the ‘Lotos-Eaters’, intensifying the Chinese analogues by reference to her father’s ‘Kubla Khan’. In ‘The Ancient Sage’ Tennyson finds an alternative to Victorian progress in Laozi’s Dao De Jing, as translated by John Chalmers, although Tennyson interprets the philosopher in Augustinian terms.
Gli stili APA, Harvard, Vancouver, ISO e altri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia