Tesi sul tema "Politics of toxic chemicals"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 saggi (tesi di laurea o di dottorato) per l'attività di ricerca sul tema "Politics of toxic chemicals".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi le tesi di molte aree scientifiche e compila una bibliografia corretta.
Benn, Suzanne Harriette Science & Technology Studies UNSW. "The Environmental Challenge to the Overloaded State: The Politics of Toxic Chemicals in NSW since the late 1970s". Awarded by:University of New South Wales. Science and Technology Studies, 1999. http://handle.unsw.edu.au/1959.4/32639.
Testo completoSiordia, Jimena Carolina. "Analysis of Toxic Chemicals Affecting the Oocyte". Thesis, The University of Arizona, 2009. http://hdl.handle.net/10150/192989.
Testo completoGabrielson, Jenny. "Assessing the toxic impact of chemicals using bacteria /". Stockholm, 2004. http://diss.kib.ki.se/2004/91-7140-143-1/.
Testo completoVenier, Marta. "Investigation of toxic organic chemicals in the environment". [Bloomington, Ind.] : Indiana University, 2008. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3319902.
Testo completoTitle from PDF t.p. (viewed May 13, 2009). Source: Dissertation Abstracts International, Volume: 69-08, Section: B, page: 4637. Adviser: Ronald A. Hites.
Goats, Geoffrey Charles. "Assessment of the effects of toxic chemicals upon earthworms". Thesis, Imperial College London, 1985. http://hdl.handle.net/10044/1/37706.
Testo completoLi, Jing Adela, e 李晶. "Temperature-dependent toxic effects of selected chemicals on marine organisms". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2014. http://hdl.handle.net/10722/211051.
Testo completopublished_or_final_version
Biological Sciences
Doctoral
Doctor of Philosophy
Jeffs, Corinne Ailsa. "Removal of toxic industrial chemicals using novel adsorbent hollow fibres". Thesis, University of Bath, 2015. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.665437.
Testo completoLum, Peck Yoong. "Cytochrome P-448 and the activation of toxic chemicals and carcinogens". Thesis, University of Surrey, 1987. http://epubs.surrey.ac.uk/847660/.
Testo completoCarway, Eugene Vincent. "Toxic chemical syndrome: body burden and immune parameters affected by environmental chemicals". Thesis, University of North Texas, 1991. https://digital.library.unt.edu/ark:/67531/metadc332749/.
Testo completoWhitfield, George C. (George Calvin). "MEMS-based resonant sensor arrays : selective detection of volatile and toxic chemicals". Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/28874.
Testo completoIncludes bibliographical references (leaves 58-59).
With growing concerns about homeland security, public health, and environmental cleanliness, there is a strong need today for robust chemical sensing systems that are portable in addition to being highly sensitive. While there are many options available for gaseous chemical detection and identification, not all are well-suited toward the creation of a portable device. Boston MicroSystems, Inc. (BMS) has developed a resonant chemical sensor that is predicted to meet the performance needs of the current market in terms of gas sensitivity, operational reliability, and overall device portability. Desirable device characteristics are attained through integrating aluminum nitride and silicon carbide in processes that are protected through a strong base of intellectual property. By developing a standardized platform for gas detection based on this sensor technology, barriers to entering the targeted markets may be overcome.
by George C. Whitfield.
M.Eng.
Thomas, Samuel William III. "Molecules and materials for the optical detection of explosives and toxic chemicals". Thesis, Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/36260.
Testo completoVita.
Includes bibliographical references.
Optical chemosensing, especially using amplifying fluorescent polymers, can allow for the highly sensitive and selective vapor-phase detection of both explosives and highly toxic chemicals, including chemical warfare agents. There are varieties of analyte targets, however, that remain challenging for detection by these methods. Research towards improving this technology has obvious implications for homeland security and soldier survivability. This dissertation details the development of new molecules, materials, and transduction schemes aimed at improving both the versatility and sensitivity of optical chemical detection. Chapter One provides an introduction to the field of fluorescent polymer sensors, principally focusing on their utility in the detection of nitroaromatic explosives. Brief descriptions of other analytical methods used for explosives detection are also included. Chapter Two describes the synthesis and optical properties of a new class of conjugated polymers that contain alkyl-amino groups directly bound to the arene rings of poly(phenylene ethynylene)s and poly(fluorene)s. These materials displayed red-shifted absorption and emission spectra, large Stokes Shifts, as well as long excited state lifetimes.
(cont.) Also described is the use of films of these readily oxidized polymers in the vapor-phase detection of hydrazine down to a concentration of 100 parts-per-billion. This new scheme for the detection of hydrazine vapor relies on the analyte's reduction of oxidized traps ("unquenching") within the polymer film to give a fluorescence "turn-on" signal. Chapter Three begins with an introduction to the various classes of explosive molecules, as well as to the concept of "tagging" plastic explosives with higher vapor pressure dopants in order to make them easier to detect. This is followed by a description of how the taggant DMNB was successfully detected using high band-gap poly(fluorene)s. The higher energy conduction bands of these materials allowed for exergonic electron transfer to DMNB and fluorescence quenching in both the solution and solid states. Phosphorescence is the theme of Chapter Four, in which two research projects based on highly phosphorescent cyclometalated Pt(II) complexes are summarized. This includes the synthesis and optical characterization of a phosphorescent poly(fluorene), one of the repeat units of which is a Pt(ppy)(acac)-type complex. Comparisons of its intrinsic photophysical properties and oxygen-induced quenching behavior to model compounds are also summarized.
(cont.) Chapter Four also details investigations into using oxidative addition reactions of new bis-cyclometalated Pt(II) complexes for the dark-field turn-on chemical detection of cyanogen halides. Incorporating substituents on the ligands that force steric crowding in the square plane accelerated the addition of cyanogen bromide to these complexes, which also correlated with the room-temperature phosphorescence efficiency of these complexes. Exposure of polymer films doped with these complexes gave a dark-field turn on signal to the blue of the reactant that corresponded to the phosphorescence of the Pt(IV) oxidative addition product. Finally, Chapter Five focuses on iptycenes, a very useful structural moiety in the field of optical chemosensing. The development of an improved synthetic procedure for the preparation of the iptycene group is described. This procedure has been showed to be effective in the preparation of a series of new iptycene-containing molecules, including a poly(iptycene). To conclude, the unique counter-aspect ratio alignment behavior of a poly(iptycene) in a stretch-aligned polymer film is summarized. This is rationalized by a "threading" model, in which the chains of the poly(vinyl chloride) matrix occupy the internal-free-volume defined by the poly(iptycene).
by Samuel William Thomas, III.
Ph.D.
Scanferlato, Vjera Sostarec. "Environment risk assessment for toxic chemicals and genetically-engineered microorganisms : a microcosm approach /". Diss., This resource online, 1990. http://scholar.lib.vt.edu/theses/available/etd-07282008-135357/.
Testo completoCoe, Jeffrey Ellis. "In vivo human ocular responses to irritant gases". Thesis, London School of Hygiene and Tropical Medicine (University of London), 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.362322.
Testo completoChatkittikunwong, Watcharee. "Analytical synthesis and stability studies of halogenated dibenzo-p-dioxins and dibenzofurans". Thesis, University of East Anglia, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.335138.
Testo completoBörjeson, Natasja. "Toxic Textiles : Towards Responsibility in Complex Supply Chains". Doctoral thesis, Södertörns högskola, Miljövetenskap, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-33670.
Testo completoEn av våra samtida stora utmaningar är hanteringen av de miljö- och hälsoproblem som följer i svallvågorna av en globaliserad handel. En av dessa utmaningar rör hanteringen av kemikalierisker. Inom textilbranschen är produktionen kemikalieintensiv och handelsmönstren karakteriseras av komplexa varukedjor som inte sällan sträcker sig över flera kontinenter. Samtidigt pågår en förändring av inblandade aktörers roller, där marknadsaktörer uppmanas att på ett ansvarstagande sätt hantera frågan om kemikalierisker och de utmaningar som hör därtill. Denna process försvåras ofta till följd av ett komplext samhälle präglat av kunskapsbrister. Detta komplicerar ansvarstagande och gör det svårt att hålla specifika aktörer, såsom företag och inköpande organisationer, ansvariga, då det inte är uppenbart vem som är ansvarig för vad. Denna avhandling undersöker hur en grupp marknadsaktörer – privata och offentliga textilinköpare – tar ansvar för kemikalierisker längs med sina varukedjor i en situation som karaktäriseras av osäkerhet och komplexitet. Avhandlingen syftar till att fördjupa förståelsen för vad som händer när marknadsaktörer uppmanas att hantera miljö- och hälsorisker från till exempel kemikalier i textil. Fokus ligger på svenska privata och offentliga textilinköpare, som exempelvis kläd- och textilföretag, offentlig förvaltning och andra inköpande organisationer. I avhandlingen konstrueras en analytisk modell baserad på nyckelbegreppen responsible governance, responsibilisation och responsible supply chain management. Avhandlingen är explorativ och genom intervjuer, deltagande observationer och litteraturstudier samt fallstudier undersöks en potentiell process av ansvarstagande samt de hinder, utmaningar och möjligheter som de inköpande organisationerna möter i sitt arbete med kemikalierisker längs med sina varukedjor. Resultaten belyser en pågående process av ansvarsförfarande på både organisations och sektornsivå. Avhandlingen visar också att på grund av kedjans komplexa struktur så förekommer större hinder och utmaningar än möjligheter för de textilinköpare som strävar efter ansvarstagande. Trots detta pekar resultaten på att samarbete, kraftfullare styrmedel och ett reflexivt tillvägagångssätt skulle kunna vara en väg mot ökat ansvarstagande inom textilsektorn.
Chemicals in textiles: Managing environmental and health risks from products with complex product chains
Klöber, Wolfram. "Risikomanagement im Chemikalienrecht : ein Rechtsvergleich des US-amerikanischen Toxic Substances Control Act und des deutschen Chemikaliengesetzes /". Hamburg : Kovač, 2003. http://www.gbv.de/dms/spk/sbb/recht/toc/362362866.pdf.
Testo completoJones, Susan H. "Nanoporous carbon/zeolite composites for the adsorption of green house gases (GHG) and toxic industrial chemicals (TIC)". Thesis, University of Surrey, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.520577.
Testo completoHenriques, Inês Domingues. "Elucidating the Response of Activated Sludge Cultures to Toxic Chemicals at the Process, Floc and Metabolic Scales". Diss., Virginia Tech, 2006. http://hdl.handle.net/10919/27937.
Testo completoPh. D.
Degen, Marcia J. "Evaluation of the potential environmental toxic effects of a nylon fibers additive". Thesis, This resource online, 1985. http://scholar.lib.vt.edu/theses/available/etd-03302010-020601/.
Testo completoUcisik, Ahmed Suheyl. "Uptake of chemicals and metabolism kinetics related to toxic effects and consideration of phytoremediation as a remediation option". Kgs. Lyngby, 2007. http://www.er.dtu.dk/publications/fulltext/2007/MR2007-044.pdf.
Testo completoThomson, Jennifer Christine. "From Wilderness to the Toxic Environment: Health in American Environmental Politics, 1945-Present". Thesis, Harvard University, 2013. http://dissertations.umi.com/gsas.harvard:10876.
Testo completoHistory of Science
Hägglund, Emelie. "GIFTFRI MILJÖ I FÖRSKOLAN : En studie om föräldrars medvetenhet om kemikalier i leksaker". Thesis, Umeå universitet, Institutionen för ekologi, miljö och geovetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-148799.
Testo completoPaulino, Connie B. "Application of Rapid, Alternative Methods to Monitor Waimanolo Watershed and Stream for Toxic Chemicals Under Dry and Rainy Conditions". Thesis, Water Resources Research Center, University of Hawaii at Manoa, 1994. http://hdl.handle.net/10125/21915.
Testo completoLi, Xiaoxun Livant Peter D. "Toward a breathable fabric for protection against airborne toxic chemicals, and an olefin-forming cascade reacion en route to 2,2'-BI(glycerol)". Auburn, Ala, 2009. http://hdl.handle.net/10415/1829.
Testo completoSpångberg, Christian. "En studie om regleringen av nanomaterial : - i The Toxic Substances Control Act (TSCA) och Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)". Thesis, Uppsala universitet, Juridiska institutionen, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-327381.
Testo completoKirby, Peter Wynn. "Environmental consciousness and the politics of waste in Tokyo : "nature", health, pollution, and the predicament of toxic Japan". Thesis, University of Cambridge, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.620198.
Testo completoFoehringer, Merchant Emma. "Radical Housewife Activism: Subverting the Toxic Public/Private Binary". Scholarship @ Claremont, 2014. http://scholarship.claremont.edu/pomona_theses/101.
Testo completoJones, Sunahtah D. "Ain't I a Woman, Too? Depictions of Toxic Femininity, Transmisogynoir, and Violence on STAR". Scholar Commons, 2019. https://scholarcommons.usf.edu/etd/7818.
Testo completoTaylor, Dedric Esmond. "The Acute Toxic Effects of the Synthetic Cannabinoid, JWH-018 on the Cardiovascular and Neuroendocrine Systems in Ictalurus punctatus (Channel Catfish)". Thesis, University of North Texas, 2017. https://digital.library.unt.edu/ark:/67531/metadc1011766/.
Testo completoKitti, Martina. "På väg mot en kemikaliesmart förskola : Förekomsten av skadliga kemikalier på förskolor och den kommunala tillsynens effekt på utrensningsarbetet". Thesis, Umeå universitet, Institutionen för ekologi, miljö och geovetenskap, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-123424.
Testo completoNacano, Letícia Ramos. "Avaliação da concentração de elementos químicos tóxicos na merenda escolar de crianças da cidade de Ribeirão Preto e estimativa de suas ingestões diárias". Universidade de São Paulo, 2012. http://www.teses.usp.br/teses/disponiveis/60/60134/tde-30102012-102601/.
Testo completoChemical\'s contamination in the environment is a growing worldwide problem. Many of these chemical elements, including Cd, Pb and As are toxic to humans. According to the World Health Organization (WHO), 90% of the intake of these toxic elements occurs through the food consumption (Tavares et al., 1992; Virga et al., 2007). Therefore, the estimation of exposure to these chemicals in the diet is essential for risk assessment and, possibly, to determine the relationship between the adverse effects observed in humans and dietary exposure to certain substances. Dietary exposure assessment is an association between the data of food consumption of a specific population with the observed concentrations of chemical elements in their diet (Nasreddine, 2010).In this sense, the objective of this study was to determine the daily intake of toxic elements (As, Pb and Cd) in children through the food provided by the city hall of Ribeirão Preto in school lunches. The methodology used in this study was double-diet, where the foods analyzed are ready for consumption. The meals provided by two local schools and the kitchen pilot were collected during all school days in March, June, August and November of 2011. The food collected was frozen and lyophilized for further analysis. The analyzes were performed using inductively coupled plasma mass spectrometry (ICP-MS) after the solubilization with tetramethylammonium hydroxide (TMAH) or acid digestion with nitric acid (HNO3) and hydrogen peroxide (H2O2) of the samples. The average concentration of As in rice, beans, vegetables, beef, poultry, freshwater fish, saltwater fish and pork were respectively: 111.2 ng g-1, 17.3 ng g-1 35.6 ng g-1, 34.3 ng g-1, 27.4 ng g-1, 65.6 ng g-1, 3.3 mg g-1 and 33.6 ng g-1. The Cd concentration found in the same foods were respectively: 11.4 ng g-1, 2.9 ng g-1, 24.6 ng g-1, 4.9 ng g-1, 2.6 ng g-1, 4.9 ng g-1, 63.6 ng g-1 and 5.1 ng g-1. The Pb concentration was found respectively, 1.1 ng g-1, 3.4 ng g-1, 23.6 ng g-1, 8.1 ng g-1, 5.1 ng g-1, 4.4 ng g-1, 6.9 ng g-1 and 18.6 ng g-1. With these values found, we calculated the average intake of these toxic elements by children during the lunch served by public schools in Ribeirão Preto. The average intake of As, Cd and Pb in elementary school children was respectively 5.3 mg, 0.6 mg and 0.4 mg; in high school was respectively 6.9 g, 0.9 g and 0 , 6 g. These intake values of As, Cd and Pb calculated are below the toxicological reference values provided by the European Food Safety Authority (EFSA) and the World Health Organization (WHO).
Chen, Ping. "Applications of Chemometric Algorithms to Ion Mobility Spectrometry and Matrix Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry". Ohio University / OhioLINK, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1206019463.
Testo completoEriksson, Johanna. "Förskolepersonals tankar kring projekt ”Giftfri förskola” : En intervjustudie om positiva och negativa konsekvenser". Thesis, Karlstads universitet, Institutionen för pedagogiska studier (from 2013), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-68159.
Testo completoHedlund, Jennie. "Kemikaliesmart förskola : En inventering av 19 kommunala förskolor i Gävle kommun". Thesis, Högskolan i Gävle, Miljöteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-22792.
Testo completoSwedish authorities and municipalities are working on the basis of the environmental quality objective non-toxic environment by reducing the use and exposure to health and environmental pollutants (Miljömål, 2016). The Swedish Chemicals Agency, on commission by the government, has drawn up an action plan to achieve the environmental objective. The Action Plan's focus is mainly on achieving a non-toxic everyday environment for children. Thru identication of riskareas, the preschools in Gävle will be able to get a good structure for the work to be done. In this diploma work in Environmental technology an inventory of Chemical Smart preschools is conducted. Nineteen municipal kindergartens in the city of Gävle are examined, with the goal of identifying areas of risk and vulnerability of children to chemicals in the preschool environment. A collaboration with the department of Education Gävle ́s environmental strategist has provided contacts and economic opportunity for the staff at the individual preschools to participate during the inventory. The final report is submitted to the department and its preschools to use as the basis of the priorities in the work of chemical smart preschool. The implementation is done with an existing template from the Swedish Society for Nature Conservation (Naturskyddsföreningen, 2013). The inventory is made in two stages, an interview before the inventory and inventory of chattels and some architectural details such as floor and wall surfaces. The inventory of chattels consists of approximately 100 questions asked and examined at each nursery, they are summarized in table format with descriptive text. Areas of risk are identified based on supported data from Swedish authorities or research in the subjected area. The discussion demonstrates the difficulties that arise in the choice of products when the contents are difficult to decipher or inaccessible. But also how the routines for cleaning, washing and airing can influence the identified risk areas. Risk areas according to the objectives and conclusions identified are depicted by type of substance or negative health effects. The identification gave six different areas: Flameproof, water and stain repellents, Chemicals from plastics, allergens, Polycyclic aromatic hydrocarbons, lead and mercury. These areas outline the types of product categories that are of concern and what kind of health risk they entail.
Haikola, Simon. "Bortom kontroll? : Den svenska kemikalieövervakningens logik". Doctoral thesis, Linköpings universitet, Tema teknik och social förändring, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-85662.
Testo completoChemical substances have become an inextricable feature of the late-industrial society, deemed necessary for the welfare, technological development and economic growth that large parts of the world have come to expect. In Sweden, the identification in the 1960s and 1970s of DDT, PCB and mercury as serious environmental threats led to the establishment of a system of chemicals control which is widely held to be one of the most advanced in the world. The thesisexamines this control system, its possibilities, its problems and its logic, through text analysis of state reports, governmental propositions, the reports of the Swedish Environmental Protection Agency (SEPA) and the Swedish Chemicals Agency (SCA), and interviews with employees at these agencies. The analysis shows chemicals control in Sweden to be a system pervaded with contradictions, which may be explained by an epistemological paradox at its core: that the accumulation of knowledge only serve to increase uncertainty. The constant increase of chemicals production, in combination with the highly unpredictable character of chemicals in the environment, puts the monitoring agencies in an impossible situation, always working against the tide. The thesis also shows, however, that the agencies are themselves an important part of maintaining a system of control that is to a large extent simulated. This in the sense that the system, by its very existence as well as by the circulation of regulatory concepts and principles within it which are in fact without much substance, always signals control, and constitute uncertainty as the exception.
Broman, Emma, e Malin Johansson. "Vision Giftfri miljö : Hinder och utvecklingsmöjligheter för Sveriges fjärde miljökvalitetsmål". Thesis, Linköpings universitet, Institutionen för tema, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-130166.
Testo completoThis paper aims to examine the problems and opportunities that the employees at The Swedish Chemicals Agency experience in theirwork with the environmental objective A Non- Toxic Environment. We want to get a better understanding of the complexity of the environmentalobjectives and the driving forces and barriers that exist in the workfield. To do this, five respondents from The Swedish Chemicals Agency wasselected through strategic selection and later interviewed through qualitative semi-structured interviews, which lasted between 30-60 minutes. As acomplement to these interviews four reports by the Environmental Protection Agency has also been analyzed. These are: annual monitoring reportsfrom 2005, 2010, 2015, and one the in-depth evaluation report from 2015. We have limited ourselves to the chapters about toxic environment andits environmental objective milestones. The material has then been analyzed and thematized with a focus on the problems and opportunities thatwe have seen through analyze. The result of this analysis eventually gave 9 themes: The environmental objective Non-toxic environment, Theenvironmental objective milestones for harmful substances, Coordination, Company responsibility, Production increase and diffuse productcontent, The complex REACH, Policy instruments, Harmful substances in the environment, and EU and the European Commission. The biggestobstacle to the objective of non-toxic environment is that it is not really a defined goal but rather a vision, which all of our respondents expressedduring the interviews. 2020 has never been a realistic time frame for this quality objective Non-toxic environment. The problem as we see it has todo with the structure of the environmental quality objective in question. By this we mean that none of the respondents actually see theenvironmental objective as anything that can be achieved. After this study we can see how the environmental objective milestones can serve as astepping stone, but that the environmental quality objective is unrealistic and should instead be made into a vision.
Huchthausen, Nadine. "Hälso- och miljöfarliga kemikalier : En kvantitativ studie om vuxnas kännedom om kemikalier i vardagen". Thesis, Karlstads universitet, Institutionen för hälsovetenskaper (from 2013), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-72537.
Testo completoBackground: Many chemicals that are being produced and used in products, materials and buildings are hazardous for human health and the environment. There are laws to make chemical usage safer and to protect human health and the environment. Despite efforts on a structural level people are still being exposed through contact with products that contain hazardous chemicals or through dust, indoor-air, water and food as well as skin absorption. Aim: The aim of the study was to examine adults’ awareness of hazardous chemicals and attitudes and behaviors to contributing to create non-toxic environments. Method: This study was performed as a cross-sectional study in which data from 176 respondents was collected. For data collection the software Survey & Report was used, and data processing and analysis were done in SPSS. Chi-square tests were done to examine associations between the variables used in the study (p-value <0,05 was significant). Results: The results showed that nearly 65 percent of the respondents had good awareness of chemicals and that there was an association between awareness and behavior and 70 percent of the respondents did take actions to minimize chemical exposure. Only 9 percent of the respondents with children were uninterested in chemicals compared to almost 25 percent of the respondents without children. Also, a larger part of respondents with children were highly aware of chemicals than those without children (69,2 and 46,3% respectively). They also took actions in a larger extend. Results showed significant associations between behavior and general attitudes and attitudes towards governmental responsibilities for respondents with children. Furthermore, there were connections between some background factors and awareness, behavior and attitudes. Conclusion: Actions are being taken on different levels in order to protect human health and the environment against hazardous chemicals. The respondents’ interest in and awareness of chemicals and behaviors to create non-toxic environments in everyday-life differed between groups. In order to create non-toxic environments and equal health for everyone it is important to further examine differences between groups and the cause of these as well as how people can be motivated to proactively minimize their exposure to chemicals.
Faerber, Anna. "Top leaders’ relationships and their destructive results : A look into the relationship between top U.S.political leaders and business leaders". Thesis, Linnéuniversitetet, Institutionen för organisation och entreprenörskap (OE), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-26135.
Testo completoRoul, Annick. "Exposition de la peau aux produits chimiques : méthodologie et évaluation de la décontamination par la terre de foulon". Thesis, Lyon, 2018. http://www.theses.fr/2018LYSE1134/document.
Testo completoCutaneous exposure to contaminants chemicals after criminal or accidental release enforces a rapid and efficient decontamination to save lives and avoid cross contamination. A bibilographic exploration of this work identifies toxic chemical (chemical warfare agents, toxic industrial chemicals), raw and synthetic decontaminants and their application methods applied in emergency. The aim of this study focuses on a decontamination tool qualification, the fuller’s earth (FE), simple formulated, easy to apply in emergency by civil Security services (fire fighter brigades). The work performed includes :The chemical and structural characterization of the powder of fuller’earth NBC-Sys , that lead to identify the palygorskite as main component, The formulation of dispersed systems and their physico chemical characterization (granulometry, zêta potentiel) in concentrated or diluted medium. The adsorption capacity of the FE and formulations for a contaminant model, the 4-cyanophenol, to assess decontamination in vitro, in aqueous medium, ex vivo on cutaneous explant.4-CP adsorption in aqueous solutions (10, 100 et 500 mg/L-1) is rapid (5-15min), when contact with FE, vary with the ratio FE/ 4-CP, to reach a plateau phase (saturation) between 45 and 60 minutes, and an steady state between 60 and 120 min. FE suspensions are more efficient (90%) than powder (70%) and water (60%) in the same experimental conditions. L’évaluation de la terre de foulon et ses formulations sur les paramètres physiologiques de la peau (perte insensible en eau et conductance) in vivo chez l’homme ne montre pas d’altération de la fonction barrière cutanée. FE and its suspensions were assessed on physiological skin parameters (Transepidermal water loss and conductance) in vivo in a human study and exhibit no alteration on the skin barrier function. Results obtained is a first step towards a reference (that actually don’t exist) including a chemical decontamination method
Murray, Jacolin Ann. "High Flow Air Sampling for Field Detection Using Gas Chromatography-Mass Spectrometry". BYU ScholarsArchive, 2010. https://scholarsarchive.byu.edu/etd/2414.
Testo completoBibri, Mohamed. "ICT Design Unsustainability & the Path toward Environmentally Sustainable Technologies". Thesis, Blekinge Tekniska Högskola, Sektionen för datavetenskap och kommunikation, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-5935.
Testo completo+46704352135/+212662815009
Benn, Suzanne. "The environmental challenge to the overloaded state : the politics of toxic chemicals in NSW since the late 1970s /". 1999. http://www.library.unsw.edu.au/~thesis/adt-NUN/public/adt-NUN2000.0017/index.html.
Testo completoChang, Keng-yu, e 張耿毓. "Hazardous analysis on leaking of toxic chemicals". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/37188095365018385270.
Testo completo雲林科技大學
環境與安全工程系碩士班
99
Industrials were fast to develop in early Taiwan and it was not the concept and implementation of environmental impact assessment at development of the industrial area. Residential, hospitals and schools often were neighborhoods with the industrial area. But, the environmental awareness promotes nowadays, and it is attention in acute toxicity, chronic toxicity and environmental accumulation of toxic chemicals especially. Therefore, toluene diisocyanate (TDI), and dimethyl formamide (DMF) were selected using Areal Locations of Hazardous Atmospheres (ALOHA) model to simulate the spread of harmful gases in central Taiwan. When the wind was 1.7m/sec, temperature was 28.24℃, humidity was 75.84%, atmospheric stability was B, wind direction is south-southwest in summer, 185 tons of liquid type of toluene diisocyanate (TDI) tank complete leaked within 10 minutes and then gas type of 15 kg as to be calculated. The results of simulation showed that after 60 minutes the ERPG-1 terminal concentration of 0.01 ppm, the influence distance was 3.8 km. In the same situation, 30 tons of dimethyl formamide (DMF) tank leaked, the gas type was calculated with 158 kg and the ERPG-1 terminal concentration of 2 ppm, the influence distance was 1.4 km. Because it is different on the largest reserves, volatile, and toxic hazards, so manufacturers should be according to their business scale and toxic characteristics provide appropriate storage and transportation planning and protection capability with chemical spills. Therefore, this study suggests that manufacturers should build at least 95% effective protection, it will effectively reduce the spread of toxic chemical spills affected areas, effectively reduce personnel injury.
Shih, Wen-Chih, e 施文智. "Investigation of Toxic Effects of Three Dental Resin Chemicals". Thesis, 2013. http://ndltd.ncl.edu.tw/handle/90352091576473577269.
Testo completo國立臺灣大學
臨床牙醫學研究所
101
Resin-containing products are widely applied in modern dentistry. Chemical substances released from the materials may cause cytotoxicity and adverse biological effects. N,N-Dimethyl-p-toluidine (DMPT), 2-Dimethylaminoethyl methacrylate (DMAEMA) and 4-Dimethylaminobenzoic acid ethyl ester (DMABEE) are three chemicals released from composite resins. Because of moderate toxicity, they were less investigated in previous studies. However, these three chemicals do not bond to composite resin after curing and are released to oral cavities for a long time. Thus, it is necessary to examine their cytoxicity and toxic mechanism. Investigations of cell growth, cell cycle progression, reactive oxygen species (ROS) production and DNA damage are valuable direction to realize the mechanism, thus were applied in the present studies to get insight into the chemicals-induced toxicity. First of all, we evaluated the effect of DMPT on CHO-K1 cells. DMPT induced both short-term and long-term growth inhibition of CHO-K1 cells. In the mean time, the ratio of micronuclei (MNi) increased in a dose-dependent manner. However, ROS production was not elevated and N-acetyl-cysteine (NAC) could not rehabilitate the growth potential. On cell cycle analysis, after treating with DMPT, there were no obvious arrest at different phases of cell cycle compared to control group. Moreover, the mode of cell death most accumulated in necrosis. According to the results from above, it suggested that ROS production was not the main cause of CHO-K1 cell death and we needed to examine other pathways to explain of DNA damage and cell death. DMAEMA also produced growth inhibition of CHO-K1 cells in the same pattern compared to DMPT. But, the effect of DNA damage of DMAEMA was weaker than DMPT. Only under 3.5 mM DMAEMA, the amount of MNi rised slightly. Similarly, ROS production obviously increased when CHO-K1 cells exposed to the highest concentration DMAEMA. However, we found that the cell cycle arrested at S and Sub-G0/G1 phase started from 1.5 mM DMAEMA. This result implied that the cells might get into apoptosis. Thus, first, we could state that DMAEMA could induce CHO-K1 cells death by ROS production, but the ability of self-repairing might alleviate the toxicity of DMAEMA. Secondary, due to different results of DNA damage between DMPT and DMAEMA, we hypothesize that they induced cell death by different mechanism. Among three drugs, DMABEE was the most toxic to CHO-K1 cells. It elicited growth inhibition of CHO-K1 cells in a dose-dependent manner, and at a much lower concentration compared to DMPT and DMAEMA. In short-term inhibition, 0.75 mM DMABEE induced about 50% down-regulation of growth capacity; in long-term inhibition, there were obvious decrease of growth potential from 0.25 mM DMABEE. Further, in morphology, CHO-K1 cells changed from cuboid- or round-shape to fibroblastic variation under high concentrations of DMABEE. However, the morphologic change could be recovered by pre-treating with carboxylesterases (CES). Similarly, after co-incubating with CES, the growth inhibition of CHO-K1 cells by DMABEE could be prevented. In CBMN assays, the percentage of MNi elevated started from 0.25 mM DMABEE. The cells were severely broken and could not be calculated by treating with 1.0 mM DMABEE. ROS production of CHO-K1 cells also increased in a dose-related manner of DMABEE. But, there was no prevention of growth inhibition after pre-incubating with NAC. We believed that NAC played a role of pro-oxidant instead of anti-oxidant. Thus, the growth inhibition of CHO-K1 cells dramatically increased. The cell cycle got arrested on G0/G1 phase started from treating with 0.25 mM DMABEE and the cell residing in the quadrant of necrosis and late apoptosis would increase. Theses results indicated that CHO-K1 cells would death through DNA damage by ROS attack and cause cell necrosis or late apoptosis. The present studies helped us to elucidate the cytotoxic mechanism of these three chemicals leached from composite resins. Although the cytotoxic concentration reported by us might not reached in prudent application. while lacking sufficient thickness of dentin or poor polymerization, the unbound chemical substances could lead potential toxic effect to the pulp tissue.
Ming-Chun, Lu, e 盧明俊. "Photocatalytic Oxidation of Toxic Chemicals with V-Illuminated Titanium Dioxid". Thesis, 1993. http://ndltd.ncl.edu.tw/handle/51785642228894057438.
Testo completoTai, Wei-Ming, e 戴偉明. "Research about the reduction of toxic chemicals in glass substrate manufacturer". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/61609901145735060175.
Testo completo國立雲林科技大學
環境與安全衛生工程系
103
The glass manufacturer of liquid crystal display would do analysis of glass substrate regarding chemical composition and physical property. The gravity analysis of glass trial would use chemicals - Tribromomethane. Tribromomethane is one of controlled toxic chemicals by Environmental Protection Administration Executive Yuan,R.O.C (Taiwan). Tribromomethane will restrain the central nervous system for physical harm. It could be much serious that causes respiratory failure and death. Maybe it'd cause cancer, genetic mutation, liver and stomach damage. For environmental harm, it'd make marine life poisoning. Therefore, we try to reduce potential environmental pollution caused by analysis trial of Tribromomethane. Our research tried to reduce usage of toxic chemicals. We did the trial of gravity about non-toxicity and Archimedes principle. We discussed the result for above trial We found out there’s obvious achievement about reduction of toxic chemicals by the experiment. It may make working people reducing gravity liquid contact and raise safety for working people. The research of toxic reduction was decreased from 285 g from 199.68 g in last year. Because there’s 68.6% Tribromomethane with gravity liquid, it may help lower consumption of 136.98 g Tribromomethane. There’re suspension and crystal released under LST experiment. We may filter suspension and make it clear again. Because the suspension may affect reality with test figures, it is not suitable for high accuracy experiment. However, its characteristic may help working people reduce contact on gravity liquid. The advantage of Archimedes Law is no chemicals use, short test timing and high safety to working people. The accuracy of Archimedes Law is the fourth digit after the decimal point. Suppose it’s urgent test and no need on high accuracy on test figures, Archimedes Law may be for temporary reference.
Chang, Kuo-Hui, e 張國輝. "Investigate the Certain Toxic Chemicals of Electrocautery Smoke in Operation Rooms". Thesis, 2007. http://ndltd.ncl.edu.tw/handle/7c3wmk.
Testo completo輔仁大學
公共衛生學系碩士班
96
Abstract Introduction: Electrocautery is widely used to cut and coagulate tissue during surgery in the operating room. A visible smoke with unpleasant odor is produced by electrocautery to pyrolysis tissue. It’s so-called “electrocautery smoke”. Electrocautery smoke contains several mutagens and carcinogens. This study intends to quantify certain chemicals with unpleasant odor and hazard in the electrocautery smoke. Meanwhile, the correlation between the concentrations and the factors included the type of diagnosis, surgery, patient’s BMI, suction condition, using electrocautery time and energy will be analyzed. Method: This study was conducted in a medical center hospital of Taipei and focused on the breast surgeries. The investigated chemicals included toluene, styrene, o,m- xylenes, phenol, acrolein and furfural. The electrocautery smoke was collected by different samplers to investigate the concentrations of target chemicals simultaneously. The samplers were SKC 575-002 passive sampler for toluene, styrene and xylenes; SKC active samplers: ST 226-95 (XAD-7), ST 226-118 (XAD-2), SKC 226-01 (charcoal) for phenol, acrolein and furfural respectively. All samplers were assembled in a chamber system and the sampling probe was located at approximately 2 ~ 3 cm from the tip of diathermy pencil. Gas Chromatography-Mass Spectrometer (GC-MS) was utilized for qualification and quantitation purposes. For each sample, the personal (patient) data, surgery, suction, using electrocautery time and energy were recorded for further analyzed. Result: Five individual samples and five cumulated samples were collected. The concentrations of styrene, o,m-xylenes, phenol, acrolein and furfural were lower than lowest quantitation levels(LQLs)in all samples. Toluene was identified in nine samples. The toluene concentration ranges of individual samples were 2.48 mg/m3 ~ 5.50 mg/m3(0.65 ppm ~ 1.45 ppm)and cumulated samples were 1.80 mg/m3 ~ 22.00 mg/m3(0.47 ppm ~ 5.80 ppm). All measured concentrations of toluene are lowered than the 2006 ACGIH TLV-TWA, 50 ppm. Conclusion: No correlation between the chemical concentrations and the type of diagnosis, suction system, using electrocautery time and energy were established in this study. However, the patient’s BMI and type of surgery might affect the toluene concentrations. More research on odor materials of electrocautery smoke should be performed. Keyword: electrocautery smoke, toluene, styrene, o,m-xylenes, phenol, acrolein, furfural, GC-MS.
Kolb, Anthony A. "Modeling the fate of toxic chemicals in four Wisconsin wastewater treatment plants". 1994. http://catalog.hathitrust.org/api/volumes/oclc/33035038.html.
Testo completoTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 164-169).
Yang, Chia-Chan, e 楊家洲. "Hazard Potential and Evacuation Planning for Toxic Chemicals of Tucheng Industrial Park". Thesis, 2013. http://ndltd.ncl.edu.tw/handle/fyb27c.
Testo completo國立臺北科技大學
土木與防災研究所
101
In recent years, fires, explosions, and chemical spills frequently happened in factories causing tremendous loss of lives and properties. These accidents in disasters often raise costs for the government; it also brings negative effects to the Nation Economy. In addition, most toxic chemical factories do not emphasize the importance of disaster preventions and rescue managements. As a result, when disasters occur, toxic chemical factories are unable to react effectively. Therefore, this may cause a significant damage and impact in the environment - an inevitable outcome. The aim of this study is to investigate the Tucheng Industrial District toxic chemical substances handling site and conduct an on-site inspection of the industrial district and area surrounding current environmental conditions. All collections and compilation of statistical data were divided into three major categories: usage volume of statistical data, actual conditions of management of andling site, and preparation for disaster prevention. These three major categories provides an understanding of the regional geography environment, the conditions of industrial district (toxic chemical substance handling site), the areas of sensitivity, and the reserve energy in regional of disaster rescue. Using the volume of statistical data and meteorology investigation iii from Application of ALOHA, Surfer-A owerful contouring, Gridding, and Geographic Information System
Wang, Chong-wen, e 王重文. "Distribution of Toxic chemicals and Disaster Risk Management – A case of Kaohsiung City". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/376822.
Testo completo國立中山大學
環境工程研究所
103
Kaohsiung is a heavily industrialized city in southern Taiwan. Hundreds factories in the city may cause serious environmental pollutions and inhibitants may expose potential risk of chemical disaster. The disaster may cause severe casualties as well as have a negative impact on Taiwan’s competitive ability and domestic economic growth. For instance, the tragic gas explosion occurred at Cianjhen, Kaohsiung in August 2014 has caused incalculable damage to the area. At persent, more than a thousand of chemicals are utilized in the industries. The prevention of chemical disasters especially caused by toxic chemicals is crucial for the risk management of city government. This research first investigated the locations and operating status of toxic chemicals under each district of Kaohsiung City. The statistics indicates that the percentages of large-scale handling licenses and registration documents issued by Kaohsiung City are 1.88% and 8.26%. Most of them are petroleum refineries and chemical factories. And the percentages of approved documents which are lower than the large-scale handling standard and class 4 toxic chemical are 56.7% and 33.15% of the overall issued documents. The operational locations are mostly laboratories, inspection agencies, institutions, and few operating factories. On the part of disaster stimulation, the research will screen out the large-scale handling factories in each industrial area in Kaohsiung and analyze the stimulated spreading of toxic chemicals from class 1 to 3 in order to evaluate the damage and disaster prevention in which toxic chemicals leaking caused. This research focuses on the spread simulated analysis on the ejection speed of gas or fluid using direct ejection. The simulation setting takes wind speed, atmosphere conditions, ambient temperature, humidity, ejection height, and others into consideration for their effective range. The simulation accounts for the highest limit of each design variables.