Articoli di riviste sul tema "Physico-Mechanical and hygro-Thermal properties"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Physico-Mechanical and hygro-Thermal properties".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.
Cao, Rulong, Juhani Marttila, Veikko Möttönen, Henrik Heräjärvi, Pekka Ritvanen e Erkki Verkasalo. "Mechanical properties and water resistance of Vietnamese acacia and rubberwood after thermo-hygro-mechanical modification". European Journal of Wood and Wood Products 78, n. 5 (18 giugno 2020): 841–48. http://dx.doi.org/10.1007/s00107-020-01552-7.
Nshimiyimana, Philbert, Adamah Messan e Luc Courard. "Physico-Mechanical and Hygro-Thermal Properties of Compressed Earth Blocks Stabilized with Industrial and Agro By-Product Binders". Materials 13, n. 17 (26 agosto 2020): 3769. http://dx.doi.org/10.3390/ma13173769.
Hsu, Hsiang Chen, Li Ming Chu, Lih Shan Chen e Shen Li Fu. "Comprehensive Hygro-Thermo-Vapor Pressure Model for CMOS Image Sensor". Key Engineering Materials 419-420 (ottobre 2009): 493–96. http://dx.doi.org/10.4028/www.scientific.net/kem.419-420.493.
Dong, Wanguo, Chunlin Liu, Xueben Bao, Tengfei Xiang e Depeng Chen. "Advances in the Deformation and Failure of Concrete Pavement under Coupling Action of Moisture, Temperature, and Wheel Load". Materials 13, n. 23 (4 dicembre 2020): 5530. http://dx.doi.org/10.3390/ma13235530.
OUEDRAOGO, Adelaïde Lareba, Adamah MESSAN, Etienne MALBILA, Emmanuel OUEDRAOGO, Dieudonné Joseph BATHIEBO, Florent pèlèga KIENO e Philippe BLANCHART. "Thermo-Physical, Mechanical and Hygro-Thermal Properties of Newly Produced Aerated Concrete". Journal of Materials Science and Surface Engineering 8, n. 2 (2021): 1021–28. http://dx.doi.org/10.52687/2348-8956/823.
Pedergnana, Matthieu, e Soofia Tahira Elias Ozkan. "Hygro-Thermal, Hydric, and Mechanical Properties of Fibre and Aggregate-Reinforced Earth Plasters". International Journal of Digital Innovation in the Built Environment 10, n. 2 (luglio 2021): 29–45. http://dx.doi.org/10.4018/ijdibe.2021070103.
Adam, Laurentiu, e Dorina-Nicolina ISOPESCU. "PHYSICO-MECHANICAL PROPERTIES INVESTIGATION OF HEMPCRETE". Journal of Applied Life Sciences and Environment 55, n. 1(189) (2022): 75–84. http://dx.doi.org/10.46909/alse-551047.
Yu, Peiyang, Peng-Zhi Pan, Guangliang Feng, Zhenhua Wu e Shankun Zhao. "Physico-mechanical properties of granite after cyclic thermal shock". Journal of Rock Mechanics and Geotechnical Engineering 12, n. 4 (agosto 2020): 693–706. http://dx.doi.org/10.1016/j.jrmge.2020.03.001.
Yaşar, E., Y. Erdoğan e H. Güneyli. "Determination of the thermal conductivity from physico-mechanical properties". Bulletin of Engineering Geology and the Environment 67, n. 2 (16 febbraio 2008): 219–25. http://dx.doi.org/10.1007/s10064-008-0126-5.
Turgut, Paki, Mehmet Irfan Yesilnacar e Husamettin Bulut. "Physico-thermal and mechanical properties of Sanliurfa limestone, Turkey". Bulletin of Engineering Geology and the Environment 67, n. 4 (26 marzo 2008): 485–90. http://dx.doi.org/10.1007/s10064-008-0145-2.
Brzyski, Przemysław, Mateusz Gładecki, Monika Rumińska, Karol Pietrak, Michał Kubiś e Piotr Łapka. "Influence of Hemp Shives Size on Hygro-Thermal and Mechanical Properties of a Hemp-Lime Composite". Materials 13, n. 23 (27 novembre 2020): 5383. http://dx.doi.org/10.3390/ma13235383.
Tang, Yaliang, Michael H. Santare, Anette M. Karlsson, Simon Cleghorn e William B. Johnson. "Stresses in Proton Exchange Membranes Due to Hygro-Thermal Loading". Journal of Fuel Cell Science and Technology 3, n. 2 (23 ottobre 2005): 119–24. http://dx.doi.org/10.1115/1.2173666.
Borah, Jyoti S., e Tapan Kumar Chaki. "Dynamic mechanical, thermal, physico-mechanical and morphological properties of LLDPE/EMA blends". Journal of Polymer Research 18, n. 4 (3 giugno 2010): 569–78. http://dx.doi.org/10.1007/s10965-010-9450-0.
Aidaraliev, Zh, Ch Zholdoshova, Zh Abdykalyk kyzy e R. Atyrova. "Physico Mechanical Characteristics of Basalt Melt". Bulletin of Science and Practice, n. 9 (15 settembre 2022): 416–22. http://dx.doi.org/10.33619/2414-2948/82/46.
A. Reka, Arianit. "Diatomite – evaluation of physico-mechanical, chemical, mineralogical and thermal properties". Geologica Macedonica 35, n. 1 (2021): 5–14. http://dx.doi.org/10.46763/geol21351368005ar.
Singh, T. N., S. Sinha e V. K. Singh. "Prediction of thermal conductivity of rock through physico-mechanical properties". Building and Environment 42, n. 1 (gennaio 2007): 146–55. http://dx.doi.org/10.1016/j.buildenv.2005.08.022.
Fu, Qilan, Alain Cloutier e Aziz Laghdir. "Heat and Mass Transfer Properties of Sugar Maple Wood Treated by the Thermo-Hygro-Mechanical Densification Process". Fibers 6, n. 3 (24 luglio 2018): 51. http://dx.doi.org/10.3390/fib6030051.
Márquez Costa, Juan Pablo, Vincent Legrand e Sylvain Fréour. "Durability of Composite Materials under Severe Temperature Conditions: Influence of Moisture Content and Prediction of Thermo-Mechanical Properties During a Fire". Journal of Composites Science 3, n. 2 (1 giugno 2019): 55. http://dx.doi.org/10.3390/jcs3020055.
Yashenko, Larisa. "THERMOPHYSICAL AND PHYSICO-MECHANICAL CHARACTERISTICS OF EPOXYURETHANE COMPOSITES". Ukrainian Chemistry Journal 86, n. 8 (15 settembre 2020): 134–43. http://dx.doi.org/10.33609/2708-129x.86.8.2020.134-143.
Samoryadov, A. V., E. V. Kalugina e V. V. Bitt. "Glass fiber filled polyphenylenesulfide of TERMORAN©: physico-mechanical and thermal properties". Plasticheskie massy, n. 7-8 (11 settembre 2019): 52–56. http://dx.doi.org/10.35164/0554-2901-2019-7-8-52-56.
Taghvaei-Ganjali, Saeed, Fereshteh Motiee e Farsa Fotoohi. "Correlation between Physico-Mechanical Properties of NR-BR Blends in Tire Tread Formulation with their Thermal Behaviors". Rubber Chemistry and Technology 81, n. 2 (1 maggio 2008): 297–317. http://dx.doi.org/10.5254/1.3548211.
Semeniuk, Igor, Viktoria Kochubei, Elena Karpenko, Yuriy Melnyk, Volodymyr Skorokhoda e Natalia Semenyuk. "Thermal and physico-mechanical properties of biodegradable materials based on polyhydroxyalkanoates". Polimery 67, n. 11-12 (2 gennaio 2023): 561–66. http://dx.doi.org/10.14314/polimery.2022.11.3.
Kwak, Jae B., e Seungbae Park. "Integrated hygro-swelling and thermo-mechanical behavior of mold compound for MEMS package during reflow after moisture preconditioning". Microelectronics International 32, n. 1 (5 gennaio 2015): 8–17. http://dx.doi.org/10.1108/mi-04-2014-0014.
Qiu, Liyan, Ajit D. Phule, Yingxia Han, Shibao Wen e Zhen‐Xiu Zhang. "Thermal aging, physico‐mechanical, dynamic mechanical properties of chlorinated polyethylene/red mud composites". Polymer Composites 41, n. 11 (6 agosto 2020): 4740–49. http://dx.doi.org/10.1002/pc.25747.
Rosu, Liliana, Cristian-Dragos Varganici, Dan Rosu e Stefan Oprea. "Effect of Thermal Aging on the Physico-Chemical and Optical Properties of Poly(ester urethane) Elastomers Designed for Passive Damping (Pads) of the Railway". Polymers 13, n. 2 (7 gennaio 2021): 192. http://dx.doi.org/10.3390/polym13020192.
Pham, Thanh Tu, V. Sridhar e Jin Kuk Kim. "Fluoroelastomer-MWNT nanocomposites-1: Dispersion, morphology, physico-mechanical, and thermal properties". Polymer Composites 30, n. 2 (19 novembre 2008): 121–30. http://dx.doi.org/10.1002/pc.20521.
Nocentini, Kevin, Patrick Achard, Pascal Biwole e Marina Stipetic. "Hygro-thermal properties of silica aerogel blankets dried using microwave heating for building thermal insulation". Energy and Buildings 158 (gennaio 2018): 14–22. http://dx.doi.org/10.1016/j.enbuild.2017.10.024.
Shabaev, A. S., Elena V. Rzhevskaya, D. M. Khakulova, S. Yu Khashirova e R. B. Tkhakakhov. "Thermal Oxidative Stability, Physico-Mechanical and Rheological Properties of Composite Materials Based on Polyetherimide". Key Engineering Materials 816 (agosto 2019): 78–83. http://dx.doi.org/10.4028/www.scientific.net/kem.816.78.
Dal Poggetto, Giovanni, Roberta Marchetti, Isabella Lancellotti, Cristina Leonelli e Luisa Barbieri. "Waste Cork in Metakaolin–Geopolymer Matrix: Physico-Mechanical Characterization". Applied Sciences 13, n. 3 (31 gennaio 2023): 1804. http://dx.doi.org/10.3390/app13031804.
Kopiika, Nadiia, Jacek Selejdak e Yaroslav Blikharskyy. "Specifics of physico-mechanical characteristics of thermally-hardened rebar". Production Engineering Archives 28, n. 1 (12 febbraio 2022): 73–81. http://dx.doi.org/10.30657/pea.2022.28.09.
Nguyen, Martin, e Radomír Sokolař. "Influence of Microstructure on Physico-Mechanical Properties and Corrosion Resistance of Refractory Forsterite-Spinel Ceramics". Materials Science Forum 1071 (18 ottobre 2022): 229–34. http://dx.doi.org/10.4028/p-600l3p.
Brzyski, Przemysław, Piotr Gleń, Mateusz Gładecki, Monika Rumińska, Zbigniew Suchorab e Grzegorz Łagód. "Influence of the Direction of Mixture Compaction on the Selected Properties of a Hemp-Lime Composite". Materials 14, n. 16 (17 agosto 2021): 4629. http://dx.doi.org/10.3390/ma14164629.
Ushkov, Valentin A., Evgeniya V. Sokoreva, Anna V. Goryunova e Stanislav A. Demjanenko. "Fire hazard of phosphorus-containing hard casting polyurethane foams". Vestnik MGSU, n. 12 (dicembre 2018): 1524–32. http://dx.doi.org/10.22227/1997-0935.2018.12.1524-1532.
Nguyen, Vu-Giang, Hae-Jun Kang, Sang-Yong Kang, Da-Woon Jung, Jin-Whoan Ko, Hoang Thai, Quang-Tham Do e Myung-Yul Kim. "Rheological Studies, Physico-Mechanical Properties, Thermal Properties and Morphology of PVC/Waste-Gypsum Composites". Composites Research 27, n. 3 (30 giugno 2014): 115–21. http://dx.doi.org/10.7234/composres.2014.27.3.115.
Saha, Indrajit, e Sanjib Kumar Sarkar. "Investigation of physico-mechanical properties of natural palm fiber reinforced polyvinyl chloride composites". Journal of Bangladesh Academy of Sciences 38, n. 1 (27 agosto 2014): 83–92. http://dx.doi.org/10.3329/jbas.v38i1.20215.
Zedler, Łukasz, Daria Kowalkowska-Zedler, Xavier Colom, Javier Cañavate, Mohammad Reza Saeb e Krzysztof Formela. "Reactive Sintering of Ground Tire Rubber (GTR) Modified by a Trans-Polyoctenamer Rubber and Curing Additives". Polymers 12, n. 12 (17 dicembre 2020): 3018. http://dx.doi.org/10.3390/polym12123018.
Shi, Jinyan, Yuanchun Liu, Enliang Wang, Lizhi Wang, Changqing Li, Huijie Xu, Ximing Zheng e Qiang Yuan. "Physico-mechanical, thermal properties and durability of foamed geopolymer concrete containing cenospheres". Construction and Building Materials 325 (marzo 2022): 126841. http://dx.doi.org/10.1016/j.conbuildmat.2022.126841.
Hulston, Janine, George Favas e Alan L. Chaffee. "Physico-chemical properties of Loy Yang lignite dewatered by mechanical thermal expression". Fuel 84, n. 14-15 (ottobre 2005): 1940–48. http://dx.doi.org/10.1016/j.fuel.2005.03.024.
Hassan, Mohammad Mahbubul, e Kiyohito Koyama. "Thermal, physico-mechanical, and morphological properties of HDPE graft-copolymerized with polystyrene". Polymers for Advanced Technologies 26, n. 10 (5 giugno 2015): 1285–93. http://dx.doi.org/10.1002/pat.3566.
Kashizadeh, Roya, Masoud Esfandeh, Amir Masoud Rezadoust e Razi Sahraeian. "Physico‐mechanical and thermal properties of date palm fiber/phenolic resin composites". Polymer Composites 40, n. 9 (31 gennaio 2019): 3657–65. http://dx.doi.org/10.1002/pc.25228.
Brzyski, Przemysław, Mateusz Jóźwiak, Jakub Siwiec, Maris Sinka e Anton Trnik. "Influence of the shives orientation on selected hygro-thermal properties of hemp-magnesium composite". Journal of Physics: Conference Series 2423, n. 1 (1 gennaio 2023): 012007. http://dx.doi.org/10.1088/1742-6596/2423/1/012007.
Członka, Sylwia, Agnė Kairytė, Karolina Miedzińska e Anna Strąkowska. "Casein/Apricot Filler in the Production of Flame-Retardant Polyurethane Composites". Materials 14, n. 13 (29 giugno 2021): 3620. http://dx.doi.org/10.3390/ma14133620.
Gomah, Mohamed Elgharib, Guichen Li, Ahmed A. Omar, Mahmoud L. Abdel Latif, Changlun Sun e Jiahui Xu. "Thermal-Induced Microstructure Deterioration of Egyptian Granodiorite and Associated Physico-Mechanical Responses". Materials 17, n. 6 (12 marzo 2024): 1305. http://dx.doi.org/10.3390/ma17061305.
Paciorek-Sadowska, Joanna, Marcin Borowicz e Marek Isbrandt. "Effect of Evening Primrose (Oenothera biennis) Oil Cake on the Properties of Polyurethane/Polyisocyanurate Bio-Composites". International Journal of Molecular Sciences 22, n. 16 (19 agosto 2021): 8950. http://dx.doi.org/10.3390/ijms22168950.
Ерофеев, В., Vladimir Erofeev, А. Родин, Aleksandr Rodin, А. Кравчук, A. Kravchuk, А. Ермаков e A. Ermakov. "PHYSICO-MECHANICAL AND THERMOPHYSICAL PROPERTIES OF FOAM- GLASS CERAMICS BASED ON SILICA ROCK". Bulletin of Belgorod State Technological University named after. V. G. Shukhov 4, n. 5 (19 aprile 2019): 8–15. http://dx.doi.org/10.34031/article_5cd6df461d0fd5.98177374.
Trakakis, George, Georgia Tomara, Vitaliy Datsyuk, Labrini Sygellou, Asterios Bakolas, Dimitrios Tasis, John Parthenios et al. "Mechanical, Electrical, and Thermal Properties of Carbon Nanotube Buckypapers/Epoxy Nanocomposites Produced by Oxidized and Epoxidized Nanotubes". Materials 13, n. 19 (27 settembre 2020): 4308. http://dx.doi.org/10.3390/ma13194308.
Ulyanova, T. M., N. P. Кrutko, P. A. Vityaz, A. A. Shevchenok, L. V. Оvseenko, L. V. Тitova e E. A. Кashaed. "Role of nanostructured modifiers in composite corundum ceramics preparation". Proceedings of the National Academy of Sciences of Belarus, Chemical Series 55, n. 4 (6 dicembre 2019): 400–414. http://dx.doi.org/10.29235/1561-8331-2019-55-4-400-414.
Benfridja, Imadeddine, Sombel Diaham, Fathima Laffir, Grace Brennan, Ning Liu e Tadhg Kennedy. "A Universal Study on the Effect Thermal Imidization Has on the Physico-Chemical, Mechanical, Thermal and Electrical Properties of Polyimide for Integrated Electronics Applications". Polymers 14, n. 9 (22 aprile 2022): 1713. http://dx.doi.org/10.3390/polym14091713.
Shojaeiarani, Jamileh, Dilpreet S. Bajwa, Chad Rehovsky, Sreekala G. Bajwa e Ghazal Vahidi. "Deterioration in the Physico-Mechanical and Thermal Properties of Biopolymers Due to Reprocessing". Polymers 11, n. 1 (2 gennaio 2019): 58. http://dx.doi.org/10.3390/polym11010058.
Hulston, Janine, Alan L. Chaffee, Christian Bergins e Karl Strauß. "Comparison of Physico-Chemical Properties of Various Lignites Treated by Mechanical Thermal Expression". Coal Preparation 25, n. 4 (ottobre 2005): 269–93. http://dx.doi.org/10.1080/07349340500444505.