Accedi

Bibliografie tematiche / Optical fibers

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Optical fibers"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 30 luglio 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Optical fibers".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Optical fibers"

1

Jóźwicki, Mateusz Łukasz, Mateusz Gargol, Małgorzata Gil-Kowalczyk e Paweł Mergo. "Commercially available granulates PMMA and PS - potential problems with the production of polymer optical fibers". Photonics Letters of Poland 12, n. 3 (30 settembre 2020): 79. http://dx.doi.org/10.4302/plp.v12i3.1036.

Testo completo

Abstract (sommario):

The aim of the study was to verify the usefulness of commercially available granulates of PMMA (poly (methyl methacrylate) and PS (polystyrene) for the production of polymer optical fibers by extrusion method. Samples were subjected to thermal processing in various conditions (different temperatures and exposure time). Thermal (TG/DTG) and spectroscopic (ATR/FT-IR) analyses were carried out to analyze changes in the samples. Based on FT-IR analysis of liquid monomers and granulates the conversion of double bonds was calculated, which gave us a picture of the degree of monomers conversion, crucial information from the technological point of view. Full Text: PDF ReferencesO. Ziemann, J. Krauser, P.E. Zamzow, W. Daum, POF Polymer Optical Fibersfor Data Communication (Berlin: Springer 2008). DirectLink P. Stajanca et al. "Solution-mediated cladding doping of commercial polymer optical fibers", Opt. Fiber Technol. 41, 227-234, (2018). CrossRef K. Peters, "Polymer optical fiber sensors—a review", Smart Mater. Struct., 20 013002 (2011) CrossRef J. Zubia and J. Arrue, "Plastic Optical Fibers: An Introduction to Their Technological Processes and Applications", Opt. Fiber Technol. 7 ,101-40 (2001) CrossRef M. Beckers, T. Schlüter, T. Gries, G. Seide, C.-A. Bunge, "6 - Fabrication techniques for polymer optical fibres", Polymer Optical Fibres, 187-199 (2017) CrossRef M. Niedźwiedź , M. Gil, M. Gargol , W. Podkościelny, P. Mergo, "Determination of the optimal extrusion temperature of the PMMA optical fibers", Phot. Lett. Poland 11, 7-9 (2019) CrossRef

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Krivenko, Yu E., e E. I. Andreeva. "Traffic interception in fiber optical video-systems". Journal of Physics: Conference Series 2086, n. 1 (1 dicembre 2021): 012150. http://dx.doi.org/10.1088/1742-6596/2086/1/012150.

Testo completo

Abstract (sommario):

Abstract In fiber-optic video systems, as well as in optical communication systems, standard single mode optical fibers (SSMF, standard G.652) are usually used. One of the advantages of these fibers is the ability to use CWDM in a wide spectrum. At the same time, more optimal near the wave-length of 1550 nm are provided by non-zero dispersion fiber (NZDSF, standard G.655) fibers. However, as studies have shown, these optical fibers have an increased sensitivity to bending. This fact can be used to traffic interception. It is shown that fiber-optics systems with SSMF have more protection from traffic interception than systems with NZDSF. To transmit a high-confidentiality video signal, special techniques, such as frequency modulation, can be used, or additional noise signals can be added.

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Tandon, Pushkar, Ming-Jun Li, Dana C. Bookbinder, Stephan L. Logunov e Edward J. Fewkes. "Nano-engineered optical fibers and applications". Nanophotonics 2, n. 5-6 (16 dicembre 2013): 383–92. http://dx.doi.org/10.1515/nanoph-2013-0032.

Testo completo

Abstract (sommario):

AbstractThe paper reviews optical fibers with nano-engineered features and methods to fabricate them. These optical fibers have nano-engineered regions comprising of randomly distributed voids which provide unique properties for designing next generation of fibers. Discussion of impact of void morphology on fiber optical properties is presented, along with the methods to control the void characteristics. Use of nano-engineered fibers for different applications (ultra-low bend loss single mode fiber, quasi-single mode bend loss fiber, endless single-mode fiber, light diffusing fibers) is discussed and the unique optical attributes of the fibers in these applications is highlighted.

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Cozic, Solenn, Simon Boivinet, Christophe Pierre, Johan Boulet, Samuel Poulain e Marcel Poulain. "Splicing fluoride glass and silica optical fibers". EPJ Web of Conferences 215 (2019): 04003. http://dx.doi.org/10.1051/epjconf/201921504003.

Testo completo

Abstract (sommario):

Splicing fluoride glass fibers and silica fibers is a critical point for manufacturing all fibered laser modules. As these materials are extremely different, various problems must be considered: thermal, expansion, mechanical, chemical. Reliability and power handling make priority concerns. We report splices made on a 200/220 multimode silica fiber and a double clad 15/250/290 ZBLAN fiber. Splices are proof tested at 300 g tensile strength. No damage is observed after thermal cycling from -30 °C to 85 °C, at 40 % RH during 24 hours. Typical optical splice loss is about 0.2 dB. They withstand 220 W input power at 976 nm without any damage and drastic temperature increasing.

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Boyd, Robert W., e Eric L. Buckland. "Nonlinear Optical Interactions in Optical Fibers". Journal of Nonlinear Optical Physics & Materials 07, n. 01 (marzo 1998): 105–12. http://dx.doi.org/10.1142/s0218863598000089.

Testo completo

Abstract (sommario):

We report on our research program aimed at clarifying the physical processes leading to the nonlinear optical response of silica optical fibers and at studying the implications of optical nonlinearities on optical pulse propagation and optical switching devices. The dominant physical processes leading to the nonlinear optical response of an optical fiber are nonresonant electronic polarization, with essentially instantaneous response, the Raman interaction, with sub-picosecond response, and electrostriction, with nanosecond response. We present experimental results that show the consequence of each of these processes on the propagation of a light pulse through an optical fiber. We have also performed one of the first direct measurements of the electrostrictive contribution to the nonlinear refractive index of optical fibers. We measure values ranging from 1.5 × 10-16 to 5.8 × 10-16 cm2/W , depending on fiber type. These values are comparable to that of the fast, Kerr nonlinearity (i.e., sum of electronic and Raman contributions) of 2.5 × 10-16 cm2/W . The measured electrostrictive nonlinearities are significantly larger than those predicted by simple models, and the possible explanations of this difference are discussed.

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Romaniuk, Ryszard S., e Waldemar Wójcik. "Optical Fiber Technology 2012". International Journal of Electronics and Telecommunications 59, n. 2 (1 giugno 2013): 131–40. http://dx.doi.org/10.2478/eletel-2013-0016.

Testo completo

Abstract (sommario):

Abstract The Conference on Optical Fibers and Their Applications, Nałȩczów 2012, in its 14th edition, which has been organized since more than 35 years, has summarized the achievements of the local optical fiber technology community, for the last year and a half. The conference specializes in developments of optical fiber technology, glass and polymer, classical and microstructured, passive and active. The event gathered around 100 participants. There were shown 60 presentations of 20 research and application groups active in fiber photonics, originating from academia and industry. Topical tracks of the Conference were: photonic materials, planar waveguides, passive and active optical fibers, propagation theory in nonstandard optical fibers, and new constructions of optical fibers. A panel discussion concerned teaching in fiber photonics. The conference was accompanied by a school on Optical Fiber Technology. The paper summarizes the chosen main topical tracks of the conference on Optical Fibers and Their Applications, Nałȩczów 2012. The papers from the conference presentations will be published in Proc. SPIE, including a conference version of this paper. The next conference of this series is scheduled for January 2014 in Białowie˙za.

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Barczak, K. "Magnetooptic effect of photonic crystal fiber in blue region of visible spectrum". Bulletin of the Polish Academy of Sciences Technical Sciences 62, n. 4 (1 dicembre 2014): 683–89. http://dx.doi.org/10.2478/bpasts-2014-0074.

Testo completo

Abstract (sommario):

Abstract The phenomenon of optical birefringence in optical fibers is caused by external factors and stress induced by the manufacturing process. This optical birefringence makes it difficult to apply optical fibers as a polarimetric sensors head. Author of this paper, proposes the application of index guiding photonic crystal fibers because stress values in a fiber core caused by internal and external factors are lower. In this paper investigation results extended in comparison with the previous author’s investigations are presented. This extension relies on investigation of magnetooptic for wavelength 405 nm. On the basis of experimental results optimal work points of optical sensing fibers were determined.

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Pickrell, Gary R., Evgenya S. Smirnova, Stanton L. De Haven e Robert S. Rogowski. "Hybrid Ordered Hole-Random Hole Optical Fibers". Advances in Science and Technology 45 (ottobre 2006): 2598–607. http://dx.doi.org/10.4028/www.scientific.net/ast.45.2598.

Testo completo

Abstract (sommario):

Photonic band gap (PBG) fibers have generated significant interest over the last decade due to the unique set of properties these fibers exhibit. In general, these fibers have been made by drawing a series of glass tubes (which are stacked in an ordered array) into a fiber. These fibers consist of an ordered arrangement of holes or tubes in a glass matrix. In this invited paper we describe a novel type of fiber, called HORHOFs (hybrid ordered random hole optical fibers). In these fibers, the refractive index of the ordered-hole region is controlled by incorporation of very small tubes of glass produced in-situ during the fiber drawing process. The result is a region of controllable glass density inside the “ordered hole”. This allows tailoring of the refractive index of the hole region and of the matrix glass around the holes. Description of the process to produce these new types of fibers, micrographs of some of the fibers produced, some potential applications, and the results of some computer modeling to predict the properties of these fibers, are presented.

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Sumetsky, M. "Nanophotonics of optical fibers". Nanophotonics 2, n. 5-6 (16 dicembre 2013): 393–406. http://dx.doi.org/10.1515/nanoph-2013-0041.

Testo completo

Abstract (sommario):

AbstractThis review is concerned with nanoscale effects in highly transparent dielectric photonic structures fabricated from optical fibers. In contrast to those in plasmonics, these structures do not contain metal particles, wires, or films with nanoscale dimensions. Nevertheless, a nanoscale perturbation of the fiber radius can significantly alter their performance. This paper consists of three parts. The first part considers propagation of light in thin optical fibers (microfibers) having the radius of the order of 100 nanometers to 1 micron. The fundamental mode propagating along a microfiber has an evanescent field which may be strongly expanded into the external area. Then, the cross-sectional dimensions of the mode and transmission losses are very sensitive to small variations of the microfiber radius. Under certain conditions, a change of just a few nanometers in the microfiber radius can significantly affect its transmission characteristics and, in particular, lead to the transition from the waveguiding to non-waveguiding regime. The second part of the review considers slow propagation of whispering gallery modes in fibers having the radius of the order of 10–100 microns. The propagation of these modes along the fiber axis is so slow that they can be governed by extremely small nanoscale changes of the optical fiber radius. This phenomenon is exploited in SNAP (surface nanoscale axial photonics), a new platform for fabrication of miniature super-low-loss photonic integrated circuits with unprecedented sub-angstrom precision. The SNAP theory and applications are overviewed. The third part of this review describes methods of characterization of the radius variation of microfibers and regular optical fibers with sub-nanometer precision.

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Carmo, J. P., e J. E. Ribeiro. "Optical Fibers on Medical Instrumentation". International Journal of Biomedical and Clinical Engineering 2, n. 2 (luglio 2013): 23–36. http://dx.doi.org/10.4018/ijbce.2013070103.

Testo completo

Abstract (sommario):

This paper provides a revision with the state-of-the-art related to the use of optical fiber sensors on medical instrumentation. Two types of optical fiber sensors are the focus of review: conventional optical fibers for communications and fiber Bragg gratings (FBGs).

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Optical fibers"

1

Washburn, Brian Richard. "Dispersion and nonlinearities associated with supercontinuum generation in microstructure fibers". Diss., Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/30964.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Richmond, Eric William. "Birefringent single-arm fiber optic enthalpimeter for catalytic reaction monitoring". Diss., This resource online, 1990. http://scholar.lib.vt.edu/theses/available/etd-07282008-135248/.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Kuhlmey, Boris T. "Theoretical and numerical investigation of the physics of microstructured optical fibres". Connect to full text, 2004. http://setis.library.usyd.edu.au/adt/public_html/adt-NU/public/adt-NU20040715.171105.

Testo completo

Abstract (sommario):

Thesis (Ph. D.)--School of Physics, Faculty of Science, University of Sydney, 2004. (In conjunction with: Université de Droit, d'Économie et des Sciences d'Aix-Marseille (Aix Marseille III)).
Bibliography: leaves 196-204.

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Kominsky, Daniel. "Development of Random Hole Optical Fiber and Crucible Technique Optical Fibers". Diss., Virginia Tech, 2005. http://hdl.handle.net/10919/28949.

Testo completo

Abstract (sommario):

This dissertation reports the development of two new categories of optical fibers. These are the Random Hole Optical Fiber (RHOF) and the Crucible Technique Hybrid Fiber (CTF). The RHOF is a new class of microstructure fiber which possesses air holes which vary in diameter and location along the length of the fiber. Unlike all prior microstructure fibers, these RHOF do not have continuous air holes which extend throughout the fiber. The CTF is a method for incorporating glasses with vastly differing thermal properties into a single optical fiber. Each of these two classes of fiber brings a new set of optical characteristics into being. The RHOF exhibit many of the same guidance properties as the previously researched microstructure fibers, such as reduced mode counts in a large area core. CTF fibers show great promise for integrating core materials with extremely high levels of nonlinearity or gain. The initial goal of this work was to combine the two techniques to form a fiber with exceedingly high efficiency of nonlinear interactions. Numerous methods have been endeavored in the attempt to achieve the fabrication of the RHOF. Some of the methods include the use of sol-gel glass, microbubbles, various silica powders, and silica powders with the incorporation of gas producing agents. Through careful balancing of the competing forces of surface tension and internal pressure it has been possible to produce an optical fiber which guides light successfully. The optical loss of these fibers depends strongly on the geometrical arrangement of the air holes. Fibers with a higher number of smaller holes possess a markedly lower attenuation. RHOF also possess, to at least some degree the reduced mode number which has been extensively reported in the past for ordered hole fibers. Remarkably, the RHOF are also inherently pressure sensitive. When force is applied to an RHOF either isotropically, or on an axis perpendicular to the length of the fiber, a wavelength dependent loss is observed. This loss does not come with a corresponding response to temperature, rendering the RHOF highly anomalous in the area of fiber optic sensing techniques. Furthermore an ordered hole fiber was also tested to determine that this was not merely a hitherto undisclosed property of all microstructure fibers. Crucible technique fibers have also been fabricated by constructing an extremely thick walled silica tube, which is sealed at the bottom. A piece of the glass that is desired for the core (such as Lead Indium Phosphate) is inserted into the hole which is in the center of the tube. The preform is then drawn on an fiber draw tower, resulting in a fiber with a core consisting of a material which has a coefficient of thermal expansion (CTE) or a melting temperature (Tm) which is not commonly compatible with those of silica.
Ph. D.

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Polley, Arup. "High performance multimode fiber systems a comprehensive approach /". Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/31699.

Testo completo

Abstract (sommario):

Thesis (Ph.D)--Electrical and Computer Engineering, Georgia Institute of Technology, 2009.
Committee Chair: Ralph, Stephen; Committee Member: Barry, John; Committee Member: Chang, G. K.; Committee Member: Cressler, John D.; Committee Member: Trebino. Part of the SMARTech Electronic Thesis and Dissertation Collection.

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Hao, Miin-Jong. "Performance evaluation of practival FSK, CPFSK, and ASK detection schemes for coherent optical fiber communication systems". Diss., Georgia Institute of Technology, 1995. http://hdl.handle.net/1853/15686.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Paye, Corey. "An Analysis of W-fibers and W-type Fiber Polarizers". Thesis, Virginia Tech, 2001. http://hdl.handle.net/10919/32474.

Testo completo

Abstract (sommario):

Optical fibers provide the means for transmitting large amounts of data from one place to another and are used in high precision sensors. It is important to have a good understanding of the fundamental properties of these devices to continue to improve their applications. A specially type of optical fiber known as a W-fiber has some desirable properties and unique characteristics not found in matched-cladding fibers. A properly designed W- fiber supports a fundamental mode with a finite cutoff wavelength. At discrete wavelengths longer than cutoff, the fundamental mode experiences large amounts of loss. The mechanism for loss can be described in terms of interaction between the fiberâ ¢s supermodes and the lossy interface at the fiberâ ¢s surface. Experiments and computer simulations support this model of W-fibers. The property of a finite cutoff wavelength can be used to develop various fiber devices. Under consideration here is the fiber polarizer. The fiber polarizer produces an output that is linearly polarized along one of the fiberâ ¢s principal axes. Some of the polarizer properties can be understood from the study of W-fibers.
Master of Science

Gli stili APA, Harvard, Vancouver, ISO e altri

8

MURA, EMANUELE. "PHOPSHATE OPTICAL FIBERS FOR IR FIBER LASERS". Doctoral thesis, Politecnico di Torino, 2014. http://hdl.handle.net/11583/2544536.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Robinson, Risa J. "Polarization modulation and splicing techniques for stressed birefringent fiber /". Online version of thesis, 1995. http://hdl.handle.net/1850/12228.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Lyyttkäinen, Katja Johanna. "Control of complex structural geometry in optical fibre drawing /". Connect to full text, 2004. http://setis.library.usyd.edu.au/adt/public_html/adt-NU/public/adt-NU20041011.120247.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Optical fibers"

1

Midwinter, John E. Optical fibers for transmission. Malabar, FL: Krieger Pub. Co., 1992.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

C, Schlesinger Jürgen, a cura di. Optical fibers research advances. New York: Nova Science Publishers, 2007.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

S, Emersone Peter, a cura di. Progress in optical fibers. Hauppauge, NY: Nova Science Publishers, 2009.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Izawa, T. Optical fibers: Materials and fabrication. Tokyo: KTK Scientific Publishers, 1987.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Alexis, Méndez, e Morse T. F, a cura di. Specialty optical fibers handbook. Amsterdam: Academic Press, 2007.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Cancellieri, Giovanni. Single-mode optical fibres. Oxford: Pergamon Press, 1991.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Buck, John A. Fundamentals of optical fibers. 2^a ed. Hoboken, N.J: John Wiley & Sons, 2004.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Buck, John A. Fundamentals of optical fibers. New York: Wiley, 1995.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

1942-, Matsumura Hiroyoshi, a cura di. Infrared optical fibers. Bristol: A. Hilger, 1989.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Paschotta, Rüdiger. Field guide to optical fiber technology. Bellingham, Wash: SPIE Press, 2009.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Capitoli di libri sul tema "Optical fibers"

1

Veit, Dieter. "Optical Fibers". In Fibers, 819–27. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-15309-9_40.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Ahluwalia, Gurinder Kaur. "Optical Fibers". In Applications of Chalcogenides: S, Se, and Te, 161–96. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-41190-3_4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Sabella, R., e P. Lugli. "Optical Fibers". In High Speed Optical Communications, 56–73. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4615-5275-8_4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Koshiba, Masanori. "Optical Fibers". In Optical Waveguide Theory by the Finite Element Method, 113–31. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-1634-3_4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Chartier, Thierry. "Optical Fibers". In Springer Handbook of Glass, 1405–39. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-93728-1_41.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Degiorgio, Vittorio, e Ilaria Cristiani. "Optical Fibers". In Photonics, 171–92. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-20627-1_6.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Nolan, Daniel A., Paul E. Blaszyk e Eric Udd. "Optical Fibers". In Fiber Optic Sensors, 9–33. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118014103.ch2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Ghatak, Ajoy, e K. Thyagarajan. "Optical Fibers". In Springer Handbook of Lasers and Optics, 1171–208. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-19409-2_14.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Personick, Stewart D. "Optical Fibers". In Fiber Optics, 6–45. Boston, MA: Springer US, 1985. http://dx.doi.org/10.1007/978-1-4899-3478-9_2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Gooch, Jan W. "Optical Fibers". In Encyclopedic Dictionary of Polymers, 504. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_8217.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Optical fibers"

1

Banerjee, Hritwick, Nicola Bartolomei e Fabien Sorin. "Soft Microstructured Optical Fibers via Thermal Drawing". In Specialty Optical Fibers. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/sof.2022.som2h.1.

Testo completo

Abstract (sommario):

The preform-to-fiber thermal drawing of thermoplastic elastomers enables the fabrication of soft multi-material optical fibers with complex architectures. It offers unprecedented opportunities to realize complex soft optical fibers for transmission and sensing.

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Khramov, I., e O. Ryabushkin. "Fiber Laser Power Measurements Using Optical Fibers with Metal Winding". In Specialty Optical Fibers. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/sof.2022.soth3g.3.

Testo completo

Abstract (sommario):

Various optical fibers with copper winding were used for the real-time measuring the fiber lasers output optical power. The mathematical model of the fiber heating allowed determining the induced microbending losses.

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Lyu, Zhouping, e Lyubov V. Amitonova. "Hollow-core fiber imaging". In Specialty Optical Fibers. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/sof.2022.sotu4i.4.

Testo completo

Abstract (sommario):

Multimode fibers serve as high-resolution imaging probes. We show that a hollow-core fiber solves the problems of high background and limited NA. We experimentally demonstrate high-NA raster-scan and compressive imaging through a hollow-core multimode fiber.

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Knight, J. C. "Optics in Microstructured and Photonic Crystal Fibers". In Workshop on Specialty Optical Fibers and their Applications. Washington, D.C.: Optica Publishing Group, 2008. http://dx.doi.org/10.1364/wsof.2008.ps3.

Testo completo

Abstract (sommario):

The development of optical fibers with two-dimensional patterns of air holes running down their length has reinvigorated research in the field of fiber optics. It has greatly–and fundamentally–broadened the range of specialty optical fibers, by demonstrating that optical fibers can be more “special” than previously thought. Fibers with air cores have made it possible to deliver energetic femtosecond-scale optical pulses, transform limited, as solitons, using single-mode fiber. Other fibers with anomalous dispersion at visible wavelengths have spawned a new generation of single-mode optical supercontinuum sources, spanning visible and near-infrared wavelengths and based on compact pump sources. A third example is in the field of fiber lasers, where the use of photonic crystal fiber concepts has led to a new hybrid laser technology, in which the very high numerical aperture available sing air holes have enabled fibers so short they are more naturally held straight than bent. This paper describes some of the basic physics and technology behind these developments, illustrated with some of the impressive demonstrations of the past 18 months.

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Jiang, Shibin. "2 Micron Fiber Lasers Using Silicate Glass Fibers". In Specialty Optical Fibers. Washington, D.C.: OSA, 2014. http://dx.doi.org/10.1364/sof.2014.sotu2b.1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Melli, F., K. Vasko, L. Rosa, L. Vincetti e F. Benabid. "Transverse Roughness Effect on Fundamental Mode Confinement Loss and Modal Content of Hollow-Core Inhibited Coupling Tube Lattice Fibers". In Specialty Optical Fibers. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/sof.2022.sotu1i.3.

Testo completo

Abstract (sommario):

The effects of the transverse surface roughness on fiber loss and modal content in hollow-core inhibited coupling tube lattice fibers is numerically investigated. Relationship between roughness spectrum and loss of core modes is assessed.

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Villatoro, Joel. "Coupled-core optical fiber sensing". In Specialty Optical Fibers. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/sof.2022.soth1h.3.

Testo completo

Abstract (sommario):

The use of optical fibers with coupled cores is proposed for sensing applications. The interrogation of coupled-core fiber sensors is simple, fast and inexpensive as the parameter being sensed can be detected as intensity changes.

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Jiang, Shibin. "Multi-Component Glass Fibers for 2 Micron Fiber Lasers". In Specialty Optical Fibers. Washington, D.C.: OSA, 2011. http://dx.doi.org/10.1364/sof.2011.somb4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Naghdi, Behnam, Lixian Wang, Manish Sharma e Zhiping Jiang. "Highly Dispersive yet Low Loss Hollow Core Fibers by Using a Combination of Anti-resonant and Resonant Elements". In Specialty Optical Fibers. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/sof.2022.sotu1i.6.

Testo completo

Abstract (sommario):

To achieve a dispersive fiber, we propose and numerically investigate an approach based on adding resonant elements to anti-resonant hollow core fibers (AR-HCF). Dispersion as large as 17,600 ps.nm − 1.km − 1 is obtained along with < 21dB.km − 1 confinement loss.

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Schuster, Kay, Hartmut Lehmann, Tino Elsmann, Tobias Habisreuther e Sebastian Dochow. "Specialty Fibers for Fiber-optic Sensors". In Optical Fiber Communication Conference. Washington, D.C.: OSA, 2014. http://dx.doi.org/10.1364/ofc.2014.tu3k.1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Optical fibers"

1

Rand, S. C. Optical Fibers for Nonlinear Optics. Fort Belvoir, VA: Defense Technical Information Center, ottobre 1986. http://dx.doi.org/10.21236/ada174518.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Bryant, George G. Fatigue Resistant Optical Fibers. Fort Belvoir, VA: Defense Technical Information Center, maggio 1991. http://dx.doi.org/10.21236/ada237568.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

DeShazer, Larry, Antonio Pastor e Stephen Rand. Investigation of Optical Fibers for Nonlinear Optics. Fort Belvoir, VA: Defense Technical Information Center, novembre 1985. http://dx.doi.org/10.21236/ada164075.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Morse, T. F. Novel Optical Fibers and Devices. Fort Belvoir, VA: Defense Technical Information Center, maggio 1995. http://dx.doi.org/10.21236/ada297050.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Miniscalco, W. J., T. Wei e P. K. Onorato. Radiation Hardened Silica-Based Optical Fibers. Fort Belvoir, VA: Defense Technical Information Center, dicembre 1988. http://dx.doi.org/10.21236/ada206910.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Miniscalco, W. J., T. Wei e P. I. Onorato. Radiation Hardened Silica-Based Optical Fibers. Fort Belvoir, VA: Defense Technical Information Center, ottobre 1986. http://dx.doi.org/10.21236/ada178466.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Menyuk, C. R. Pulse propagation in inhomogeneous optical fibers. Office of Scientific and Technical Information (OSTI), maggio 1992. http://dx.doi.org/10.2172/7016315.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Hughes, R. J., G. G. Luther, G. L. Morgan, C. G. Peterson e C. Simmons. Quantum cryptography over underground optical fibers. Office of Scientific and Technical Information (OSTI), maggio 1996. http://dx.doi.org/10.2172/251411.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Hill, Kent B., e Carl A. Villarruel. POTDR Measurements on Buried Optical Fibers. Fort Belvoir, VA: Defense Technical Information Center, agosto 1998. http://dx.doi.org/10.21236/ada351903.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Engelsrath, A., B. L. Danielson e D. L. Franzen. Attenuation measurements on deformed optical fibers. Gaithersburg, MD: National Bureau of Standards, 1986. http://dx.doi.org/10.6028/nbs.ir.86-3052.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!