Letteratura scientifica selezionata sul tema "Multi-fuel cell stacks system"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Multi-fuel cell stacks system".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Multi-fuel cell stacks system"
Calderón, Antonio José, Francisco José Vivas, Francisca Segura e José Manuel Andújar. "Integration of a Multi-Stack Fuel Cell System in Microgrids: A Solution Based on Model Predictive Control". Energies 13, n. 18 (19 settembre 2020): 4924. http://dx.doi.org/10.3390/en13184924.
Testo completoCheng-HaoYang, Chang, Yen-HsinChan e Chang. "A Dynamic Analysis of the Multi-Stack SOFC-CHP System for Power Modulation". Energies 12, n. 19 (26 settembre 2019): 3686. http://dx.doi.org/10.3390/en12193686.
Testo completoZhang, Gang, Su Zhou, Jianhua Gao, Lei Fan e Yanda Lu. "Stacks multi-objective allocation optimization for multi-stack fuel cell systems". Applied Energy 331 (febbraio 2023): 120370. http://dx.doi.org/10.1016/j.apenergy.2022.120370.
Testo completoLinderoth, Søren, Peter Halvor Larsen, M. Mogensen, Peter V. Hendriksen, N. Christiansen e H. Holm-Larsen. "Solid Oxide Fuel Cell (SOFC) Development in Denmark". Materials Science Forum 539-543 (marzo 2007): 1309–14. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.1309.
Testo completoMa, Zhiwen, Ramki Venkataraman e Mohammad Farooque. "Study of the Gas Flow Distribution and Heat Transfer for Externally Manifolded Fuel Cell Stack Module Using Computational Fluid Dynamics Method". Journal of Fuel Cell Science and Technology 1, n. 1 (28 giugno 2004): 49–55. http://dx.doi.org/10.1115/1.1794155.
Testo completoZhou, Su, Gang Zhang, Lei Fan, Jianhua Gao e Fenglai Pei. "Scenario-oriented stacks allocation optimization for multi-stack fuel cell systems". Applied Energy 308 (febbraio 2022): 118328. http://dx.doi.org/10.1016/j.apenergy.2021.118328.
Testo completoR.Kennady, Et al. "Combining Start-Stop Techniques to Manage a Fuel Cell Cluster in an Electric Car". International Journal on Recent and Innovation Trends in Computing and Communication 11, n. 1 (31 gennaio 2023): 177–80. http://dx.doi.org/10.17762/ijritcc.v11i1.9800.
Testo completoZuo, Jian, Catherine Cadet, Zhongliang Li, Christophe Berenguer e Rachid Outbib. "Post-prognostics decision making for a two-stacks fuel cell system based on a load-dependent deterioration model". PHM Society European Conference 5, n. 1 (22 luglio 2020): 9. http://dx.doi.org/10.36001/phme.2020.v5i1.1270.
Testo completoYun, Sanghyun, Jinwon Yun e Jaeyoung Han. "Development of a 470-Horsepower Fuel Cell–Battery Hybrid Xcient Dynamic Model Using SimscapeTM". Energies 16, n. 24 (15 dicembre 2023): 8092. http://dx.doi.org/10.3390/en16248092.
Testo completoKruusenberg, Ivar, Kush Chadha e Taarini Atal. "High Power Density Fuel Cell Systems for Portable Electric Generators". ECS Meeting Abstracts MA2022-01, n. 26 (7 luglio 2022): 1234. http://dx.doi.org/10.1149/ma2022-01261234mtgabs.
Testo completoTesi sul tema "Multi-fuel cell stacks system"
Hard, Kevin. "PEM fuel cell multi-phase system". Thesis, University of Nottingham, 2005. http://eprints.nottingham.ac.uk/13198/.
Testo completoSanchez, Antonio. "Energy management in electric systems fed by fuel cell stacks". Phd thesis, Université Paris Sud - Paris XI, 2011. http://tel.archives-ouvertes.fr/tel-00590217.
Testo completoMiller, Matthew Michael. "Modeling, Designing, Building, and Testing a Microtubular Fuel Cell Stack Power Supply System for Micro Air Vehicle (MAVs)". Thesis, Virginia Tech, 2009. http://hdl.handle.net/10919/76880.
Testo completoMaster of Science
Erkan, Serdar. "Development Of 100w Portable Fuel Cell System Working With Sodium Borohydride". Phd thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613564/index.pdf.
Testo completoultrasonic spray coating technique&rdquo
is developed for membrane electrode assembly (MEA) manufacturing. New metal and graphite bipolar plates are designed and manufactured by CNC technique. A fuel cell controller hardware is developed for fuel supply and system control. The power densities reached with the new method are 0.53, 0.74, 0.77, and 0.88 W/cm2 for 20%, 40%, 50%, 70% Pt/C catalyst by keeping 0.4mg Pt/cm2 platinum loading constant, respectively. The power density increase is 267% compared to &ldquo
spraying of catalyst ink with air pressure atomizing spray gun&rdquo
. All parts of the PEM fuel cell stack designed were produced, assembled, and tested. The current density reached is 12.9A at 12 V stack potential and the corresponding electrical power of the stack is 155W.
Wu, Xinying. "Reliability Assessment of a Continuous-state Fuel Cell Stack System with Multiple Degrading Components". Ohio University / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1556794664723115.
Testo completoSundaresan, Meenakshi. "A thermal model to evaluate sub-freezing startup for a direct hydrogen hybrid fuel cell vehicle polymer electrolyte fuel cell stack and system /". For electronic version search Digital dissertations database. Restricted to UC campuses. Access is free to UC campus dissertations, 2004. http://uclibs.org/PID/11984.
Testo completoYin, Liangzhen. "Intelligent control for performance optimization of proton exchange membrane fuel cell system". Electronic Thesis or Diss., Bourgogne Franche-Comté, 2023. http://www.theses.fr/2023UBFCA013.
Testo completoProton exchange membrane fuel cell (PEMFC) system has been considered as the new power generation technology as it has the advantage of high power density, zero emission, high efficiency, and fast start-up characteristics. Therefore, this thesis is devoted to researching system integration, system parameter trcking control, and system performance optimization for open-cathode and closed-cathode PEMFC systems. For open-cathode PEMFC system, the stack temperature is the key factor sffecting the output performance of the system. In order to improve the dynamic temperature tracking performance under load changing conditions, adaptive inverse control and grey prediction based model free adaptive control is proposed for optimal temperature control of system. Further, in order to enhance the system efficiency of system, a maximum efficiency control strategy based on maximum efficiency optimization and constraint generalized predictive control is proposed in this thesis. For closed-cathode PEMFC system, considering the existed nonlinearity and strong coupling between operating parameters such as stack temperature and oxygen excess ratio (OER), a dual loop multivariable control strategy based on MIMO model free adaptive sliding mode control is proposed for stack temperature and air flow rate regulation of closed-cathode PEMFC system. Moreover, a 300 W open-cathode PEMFC system test bench and a 5-kW closed-cathode PEMFC system tests bench are established. All the control strategies and the performance optimization strategies are verified on the established test bench of open-cathode and closed-cathode PEMFC systems
Rosich, Oliva Albert. "Sensor placement for fault diagnosis based on structural models: application to a fuel cell stak system". Doctoral thesis, Universitat Politècnica de Catalunya, 2011. http://hdl.handle.net/10803/53635.
Testo completoEl present treball té per objectiu incrementar les prestacions dels diagnosticadors mitjançant la localització de sensors en el procés. D'aquesta manera, instal·lant els sensors apropiats s'obtenen millors diagnosticador i més facilitats d'implementació. El treball està basat en models estructurals i contempla una sèrie de simplificacions per tal de entrar-se només en la problemàtica de la localització de sensors. S'utilitzen diversos enfocs per tal de resoldre la localització de sensors, tot ells tenen com objectiu trobar la configuració òptima de sensors. Les tècniques de localització de sensors són aplicades a un sistema basat en una pila de combustible. El model d'aquest sistema està format per equacions no lineals. A més, hi ha la possibilitat d'instal·lar fins a 30 sensors per tal de millorar la diagnosis del sistema. Degut a aquestes característiques del sistema i del model, els resultats obtinguts mitjançant aquest cas d'estudi reafirmen l'aplicabilitat dels mètodes proposats.
SENNA, ROQUE M. de. "Desenvolvimento e demonstração de funcionamento de um sistema híbrido de geração de energia elétrica, com tecnologia nacional, composto por módulo de células a combustível tipo PEMFC e acumulador chumbo ácido". reponame:Repositório Institucional do IPEN, 2012. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10121.
Testo completoMade available in DSpace on 2014-10-09T13:59:32Z (GMT). No. of bitstreams: 0
Tese (Doutoramento)
IPEN/T
Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP
Payman, Alireza. "Contribution à la gestion d'énergie dans les systèmes hybrides multi-sources multi-charges". Thesis, Vandoeuvre-les-Nancy, INPL, 2009. http://www.theses.fr/2009INPL038N/document.
Testo completoThis work deals with a nonlinear control strategy of an electrical hybrid system which is composed of a fuel cell as the main source and a supercapacitor bank as the auxiliary source. Any algorithm commutation is not used in the proposed control strategy whereas the system works in different operating modes. After a review of various structures of the electrical hybrid systems and different control methods of these systems, two new approaches are developed. The first one is flatness-based method to ensure the energy management in the proposed hybrid systems and generally in a multi source / multi loads system. The proposed strategy is based on generation of a reduced-order model of the system. The energy management is carried out through the reference trajectories of the stored electrostatic energy of the system. The effect of the proposed control method on design of the system components (inductors and capacitors) is explained. In the second approach, the total energy stored in the choppers is taken into account to control the load converters of a multi-source/multi load system by use of the input/output linearization method. A nonlinear observer is proposed to estimate the variation of voltage-power output characteristic of the fuel cell which leads to an optimal performance of the hybrid system. The simulation and experimental results prove validity of the proposed control strategy
Libri sul tema "Multi-fuel cell stacks system"
United States. National Aeronautics and Space Administration., a cura di. Effects of the cooling system parameters on heat transfer and performance of the PAFC stack during transient operation. [Cleveland, Ohio]: Cleveland State University, 1992.
Cerca il testo completoUnited States. National Aeronautics and Space Administration., a cura di. Effects of the cooling system parameters on heat transfer and performance of the PAFC stack during transient operation. [Cleveland, Ohio]: Cleveland State University, 1992.
Cerca il testo completoObara, Shin'ya. Distributed energy systems. New York: Nova Science Publishers, Inc., 2009.
Cerca il testo completoNational Research Council (U.S.). Committee on the Assessment of Technologies for Improving Light-Duty Vehicle Fuel Economy. Assessment of fuel economy technologies for light-duty vehicles. Washington, D.C: National Academies Press, 2011.
Cerca il testo completoKokodyniak, Gerald William. Design of a KOH bipolar fuel cell stack system. 1985.
Cerca il testo completoPershina, K. D., e K. O. Kazdobin. Impedance spectroscopy of electrolytic materials. V.I. Vernadsky Institute of General and Inorganic Chemistry, 2012. http://dx.doi.org/10.33609/guide.2012.224.
Testo completoMagee, Patrick, e Mark Tooley. Intraoperative monitoring. A cura di Jonathan G. Hardman. Oxford University Press, 2017. http://dx.doi.org/10.1093/med/9780199642045.003.0043.
Testo completoCapitoli di libri sul tema "Multi-fuel cell stacks system"
Hsu, Che-Jung, Cheng-Huei Lin, Chih-Hung Lee, Li-Duan Tsai e Chien-Ming Lai. "High Efficiency Fuel Cell Stack and Key Technologies of Power Module". In Proceedings of the 10th Hydrogen Technology Convention, Volume 1, 422–28. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8631-6_41.
Testo completoLi, Duankai, e Guorui Zhang. "Coordinated Control Technology for Multi-stack Fuel Cell System". In Springer Proceedings in Physics, 159–65. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8581-4_17.
Testo completoPukrushpan, Jay T., Anna G. Stefanopoulou e Huei Peng. "Fuel Cell System Model: Fuel Cell Stack". In Advances in Industrial Control, 31–56. London: Springer London, 2004. http://dx.doi.org/10.1007/978-1-4471-3792-4_3.
Testo completoHagen, Anke. "SOFCCell, Stack and System Level". In Fuel Cells : Data, Facts and Figures, 304–20. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA., 2016. http://dx.doi.org/10.1002/9783527693924.ch31.
Testo completoChristiansen, Niels. "Fuel Cell Systems for APU. SOFCCell, Stack, and Systems". In Fuel Cells : Data, Facts and Figures, 248–56. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA., 2016. http://dx.doi.org/10.1002/9783527693924.ch25.
Testo completoTong, Guangyao, Fengxiang Chen, Tao Li, Shuo Xu, Wei Shen e Su Zhou. "Modeling and Simulation of PEMFC Supply System with Oxygen and Air Mixing". In Proceedings of the 10th Hydrogen Technology Convention, Volume 1, 383–89. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8631-6_37.
Testo completoLiu, Ze, Sichuan Xu e Baitao Zhang. "Development and Validation of a 100 kW-Class Fuel Cell System Controller for Passenger Cars". In Proceedings of the 10th Hydrogen Technology Convention, Volume 1, 69–75. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8631-6_7.
Testo completoYang, Quan, Abdel Aitouche e Belkacem Ould Bouamama. "Structural Analysis for Fault Detection and Isolation in Fuel Cell Stack System". In Sustainability in Energy and Buildings, 239–54. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-03454-1_25.
Testo completoHöflinger, Johannes, Peter Hofmann e Bernhard Geringer. "Dynamic multi-parameter sensitive modeling of a PEM fuel cell system for BEV range extender applications". In Proceedings, 171–90. Wiesbaden: Springer Fachmedien Wiesbaden, 2019. http://dx.doi.org/10.1007/978-3-658-26056-9_11.
Testo completoAdenuga, Olukorede Tijani, Khumbulani Mpofu e Thobelani Mathenjwa. "Energy Efficiency for Manufacturing Using PV, FSC, and Battery-Super Capacitor Design to Enhance Sustainable Clean Energy Load Demand". In Lecture Notes in Mechanical Engineering, 259–70. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-18326-3_26.
Testo completoAtti di convegni sul tema "Multi-fuel cell stacks system"
Zhou, Su, Gang Zhang, Zixiang Wang, Lei Fan e Fenglai Pei. "Multi-Stack Fuel Cell System Stacks Allocation Optimization Based on Genetic Algorithms". In WCX SAE World Congress Experience. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2022. http://dx.doi.org/10.4271/2022-01-0689.
Testo completoLee, Taehee, Jin Hyeok Choi, Mi-hwa Choi e Young-Sung Yoo. "Development of kW Class Planar Type SOFC Stacks and a 5kW Class Cogeneration System". In ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2010. http://dx.doi.org/10.1115/fuelcell2010-33265.
Testo completoGhezel-Ayagh, Hossein, Joseph McInerney, Ramki Venkataraman, Mohammad Farooque e Robert Sanderson. "Development of Direct Carbonate Fuel Cell Systems for Achieving Ultra High Efficiency". In ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2010. http://dx.doi.org/10.1115/fuelcell2010-33103.
Testo completoJin, Yapeng, Tanghu Yuan, Lei Fan e Su Zhou. "Research on Cold Start Strategy of Vehicle Multi-Stack Fuel Cell System". In SAE 2023 Vehicle Powertrain Diversification Technology Forum. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2023. http://dx.doi.org/10.4271/2023-01-7036.
Testo completoDas, Susanta K., Etim U. Ubong, Antonio Reis e K. Joel Berry. "Experimental Performance Comparison of a Single Cell and Multi-Cell Stack of High Temperature PEM Fuel Cell Prototype". In ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2010. http://dx.doi.org/10.1115/fuelcell2010-33175.
Testo completoLindahl, Peter A., e Steven R. Shaw. "Reference Based Fuel Cell Stack Simulator". In ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2010. http://dx.doi.org/10.1115/fuelcell2010-33315.
Testo completoSupra, Jen, Holger Janßen, Werner Lehnert e Detlef Stolten. "Cooling Methods for High Temperature Polymer Electrolyte Fuel Cell Stacks". In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-89326.
Testo completoUkai, Kenji, Yasuhisa Nakamura, Yasunobu Mizutani, Koji Hisada, Misuzu Yokoyama, Masato Yasuhara, Kohki Nagai et al. "Development of Planar Type SOFC Stacks Operable Under Rapid Starting". In ASME 2006 4th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2006. http://dx.doi.org/10.1115/fuelcell2006-97188.
Testo completoXu, Liangfei, Jianqiu Li, Minggao Ouyang, Jianfeng Hua e Xiangjun Li. "A New Generation of Fuel Cell Hybrid Powertrain for Public Traffic". In ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2010. http://dx.doi.org/10.1115/fuelcell2010-33008.
Testo completoDepature, Clement, Loic Boulon, Pierre Sicard e Michael Fournier. "Simulation model of a multi-stack fuel cell system". In 2013 15th European Conference on Power Electronics and Applications (EPE). IEEE, 2013. http://dx.doi.org/10.1109/epe.2013.6634727.
Testo completoRapporti di organizzazioni sul tema "Multi-fuel cell stacks system"
Staples, L., e D. P. Bloomfield. Hydrogen Supply System for Small PEM Fuel Cell Stacks. Fort Belvoir, VA: Defense Technical Information Center, luglio 1997. http://dx.doi.org/10.21236/ada396718.
Testo completoWilson, Thomas E., Avraham A. Levy e Tzvi Tzfira. Controlling Early Stages of DNA Repair for Gene-targeting Enhancement in Plants. United States Department of Agriculture, marzo 2012. http://dx.doi.org/10.32747/2012.7697124.bard.
Testo completoInbody, M. A., N. E. Vanderborgh, J. C. Hedstrom e J. I. Tafoya. PEM fuel cell stack performance using dilute hydrogen mixture. Implications on electrochemical engine system performance and design. Office of Scientific and Technical Information (OSTI), dicembre 1996. http://dx.doi.org/10.2172/460308.
Testo completoWheeler, D., e M. Ulsh. Manufacturing Readiness Assessment for Fuel Cell Stacks and Systems for the Back-up Power and Material Handling Equipment Emerging Markets (Revised). Office of Scientific and Technical Information (OSTI), febbraio 2010. http://dx.doi.org/10.2172/952179.
Testo completoWheeler, Doug, e Michael Ulsh. 2010 Manufacturing Readiness Assessment Update to the 2008 Report for Fuel Cell Stacks and Systems for the Backup Power and Materials Handling Equipment Markets. Office of Scientific and Technical Information (OSTI), agosto 2012. http://dx.doi.org/10.2172/1052900.
Testo completoPhilosoph-Hadas, Sonia, Peter B. Kaufman, Shimon Meir e Abraham H. Halevy. Inhibition of the Gravitropic Shoot Bending in Stored Cut Flowers Through Control of Their Graviperception: Involvement of the Cytoskeleton and Cytosolic Calcium. United States Department of Agriculture, dicembre 2005. http://dx.doi.org/10.32747/2005.7586533.bard.
Testo completo