Articoli di riviste sul tema "Microscale fabrication process"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Microscale fabrication process".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.
Ghaznavi, Amirreza, Jie Xu e Seth A. Hara. "A Non-Sacrificial 3D Printing Process for Fabricating Integrated Micro/Mesoscale Molds". Micromachines 14, n. 7 (30 giugno 2023): 1363. http://dx.doi.org/10.3390/mi14071363.
Testo completoBley, P. "The Liga Process for Fabrication of Three-Dimensional Microscale Structures". Interdisciplinary Science Reviews 18, n. 3 (settembre 1993): 267–72. http://dx.doi.org/10.1179/isr.1993.18.3.267.
Testo completoSugimoto, Ryota, Ju Hun Lee, Ju-Hyuck Lee, Hyo-Eon Jin, So Young Yoo e Seung-Wuk Lee. "Bacteriophage nanofiber fabrication using near field electrospinning". RSC Advances 9, n. 67 (2019): 39111–18. http://dx.doi.org/10.1039/c9ra07510k.
Testo completoKim, Kangil, Jae Keun Lee, Seung Ju Han e Sangmin Lee. "A Novel Top-Down Fabrication Process for Vertically-Stacked Silicon-Nanowire Array". Applied Sciences 10, n. 3 (8 febbraio 2020): 1146. http://dx.doi.org/10.3390/app10031146.
Testo completoBunea, Ada-Ioana, Nuria del Castillo Iniesta, Ariadni Droumpali, Alexandre Emmanuel Wetzel, Einstom Engay e Rafael Taboryski. "Micro 3D Printing by Two-Photon Polymerization: Configurations and Parameters for the Nanoscribe System". Micro 1, n. 2 (25 settembre 2021): 164–80. http://dx.doi.org/10.3390/micro1020013.
Testo completoChoi, Jinwoong, Myeonghyeon Cho e Bumjoo Kim. "Fabrication of Nonconductive Microscale Patterns on Ion Exchange Membrane by Laser Process". Korean Journal of Materials Research 33, n. 2 (27 febbraio 2023): 71–76. http://dx.doi.org/10.3740/mrsk.2023.33.2.71.
Testo completoYang, Zhuo Qing, Hong Wang, Zheng Jie Zhang, Gui Fu Ding, Xiao Lin Zhao e Chun Yan Jiang. "Fabrication and Mechanical Characterization of a Microscale Electrophoretic Polymer Based on MEMS Technology". Advanced Materials Research 422 (dicembre 2011): 375–78. http://dx.doi.org/10.4028/www.scientific.net/amr.422.375.
Testo completoTang, Min Jin, Hui Min Xie, Jian Guo Zhu, Peng Wan Chen, Qing Ming Zhang e Xiao Jun Li. "A New Moiré Grating Fabrication Technique Using Hot Embossing Lithography". Applied Mechanics and Materials 83 (luglio 2011): 7–12. http://dx.doi.org/10.4028/www.scientific.net/amm.83.7.
Testo completoHerrera-Loya, Maite R., L. Mariana Cervantes-Herrera, Sofia Gutierrez-Vallejo e Jorge G. Ibanez. "Leaded or unleaded? Homemade microscale tin electroplating". Chemistry Teacher International 4, n. 1 (1 marzo 2022): 97–102. http://dx.doi.org/10.1515/cti-2021-0024.
Testo completoPark, Seorin, Da Young Lee e Sunghun Cho. "Development of Light-Scribing Process Using L-Ascorbic Acid for Graphene Micro-Supercapacitor". Micromachines 15, n. 7 (30 giugno 2024): 858. http://dx.doi.org/10.3390/mi15070858.
Testo completoKadekar, Vinay, Weiya Fang e Frank Liou. "Deposition Technologies For Micromanufacturing: A Review". Journal of Manufacturing Science and Engineering 126, n. 4 (1 novembre 2004): 787–95. http://dx.doi.org/10.1115/1.1811118.
Testo completoWang, Dazhi, Kuipeng Zhao, Yuheng Yuan, Zhu Wang, Haoran Zong, Xi Zhang e Junsheng Liang. "Fabrication and Characterization of a Microscale Piezoelectric Vibrator Based on Electrohydrodynamic Jet Printed PZT Thick Film". Micromachines 12, n. 5 (6 maggio 2021): 524. http://dx.doi.org/10.3390/mi12050524.
Testo completoYang, Jung Ho, Zhi Jun Zhao e Sang Hu Park. "Fabrication of Microscale Wrinkles on a Curved Surface Using Weak-Polymerization and Thermal Curing Process". Journal of the Korean Society for Precision Engineering 33, n. 10 (1 ottobre 2016): 875–80. http://dx.doi.org/10.7736/kspe.2016.33.10.875.
Testo completoChen, M., X. Ding, L. Que e X. Liang. "Fabrication of microstructures on curved hydrogel substrates". Journal of Vacuum Science & Technology B 40, n. 5 (settembre 2022): 052804. http://dx.doi.org/10.1116/6.0002071.
Testo completoZhang, Bing, Shikang Li, M. Shafin H. Qureshi, Ukil Mia, Zhenghui Ge e Aiping Song. "In-Situ Assembly of MoS2 Nanostructures on EHD-Printed Microscale PVDF Fibrous Films for Potential Energy Storage Applications". Polymers 14, n. 23 (1 dicembre 2022): 5250. http://dx.doi.org/10.3390/polym14235250.
Testo completoOliveira, Cristiana, José A. Teixeira, Nelson Oliveira, Sónia Ferreira e Cláudia M. Botelho. "Microneedles’ Device: Design, Fabrication, and Applications". Macromol 4, n. 2 (15 maggio 2024): 320–55. http://dx.doi.org/10.3390/macromol4020019.
Testo completoHorade, M., K. Yamada, T. Yamawaki e M. Yashima. "Research on fabrication method for floating structures using general photolithography with high versatility". Journal of Micromechanics and Microengineering 31, n. 12 (25 ottobre 2021): 125004. http://dx.doi.org/10.1088/1361-6439/ac2d9b.
Testo completoSharma, Vyom, e C. Chandraprakash. "Quasi-superhydrophobic microscale two-dimensional phononic crystals of stainless steel 304". Journal of Applied Physics 131, n. 18 (14 maggio 2022): 184901. http://dx.doi.org/10.1063/5.0079375.
Testo completoLiu, Xin, Stephan Prinz, Heino Besser, Wilhelm Pfleging, Markus Wissmann, Christoph Vannahme, Markus Guttmann et al. "Organic semiconductor distributed feedback laser pixels for lab-on-a-chip applications fabricated by laser-assisted replication". Faraday Discuss. 174 (2014): 153–64. http://dx.doi.org/10.1039/c4fd00077c.
Testo completoHerrera-Granados, German, Kiwamu Ashida, Ichiro Ogura, Yuichi Okazaki, Noboru Morita, Hirofumi Hidai, Souta Matsusaka e Akira Chiba. "Development of a Non-RigidMicro-Scale Cutting Mechanism Measuring the Cutting Force Using an Optical Lever". International Journal of Automation Technology 8, n. 6 (5 novembre 2014): 903–11. http://dx.doi.org/10.20965/ijat.2014.p0903.
Testo completoLi, Jing Feng, Song Zhe Jin e Yong Li. "Fabrication of Si3N4 Micro-Components by a Combined Microfabrication Process". Key Engineering Materials 287 (giugno 2005): 28–32. http://dx.doi.org/10.4028/www.scientific.net/kem.287.28.
Testo completoJung, Jaehan. "Continuous manufacturing of 3D patterned hybrid film via a roll-to-roll process with UV curing". Modern Physics Letters B 34, n. 07n09 (16 marzo 2020): 2040039. http://dx.doi.org/10.1142/s0217984920400394.
Testo completoChen, Jianqiu, Liao Gan, Zhipeng Pan, Honglong Ning, Zhiqiang Fang, Hongfu Liang, Ruiqiang Tao, Wei Cai, Rihui Yao e Junbiao Peng. "A Strategy toward Realizing Ultrashort Channels and Microstructures Array by Piezoelectric Inkjet Printing". Nanomaterials 9, n. 11 (24 ottobre 2019): 1515. http://dx.doi.org/10.3390/nano9111515.
Testo completoBoonhaijaroen, Narit, Pitchaya Sitthi-amorn, Werayut Srituravanich, Kwanrat Suanpong, Sanong Ekgasit e Somchai Pengprecha. "Alignment Control of Ferrite-Decorated Nanocarbon Material for 3D Printing". Micromachines 15, n. 6 (6 giugno 2024): 763. http://dx.doi.org/10.3390/mi15060763.
Testo completoLiu, Wendong, Xiaojing Wang, Siyuan Xiang, Yuechang Lian e Shengyang Tao. "Stretchable Superhydrophobic Surfaces: From Basic Fabrication Strategies to Applications". Processes 12, n. 1 (3 gennaio 2024): 124. http://dx.doi.org/10.3390/pr12010124.
Testo completoMohammed, Muneer, Usama Umer, Ateekh Rehman, Abdulrahman Al-Ahmari e Abdulaziz El-Tamimi. "Microchannels Fabrication in Alumina Ceramic Using Direct Nd:YAG Laser Writing". Micromachines 9, n. 8 (27 luglio 2018): 371. http://dx.doi.org/10.3390/mi9080371.
Testo completoJiang, J., W. J. Meng, G. B. Sinclair e E. Lara-Curzio. "Further experiments and modeling for microscale compression molding of metals at elevated temperatures". Journal of Materials Research 22, n. 7 (luglio 2007): 1839–48. http://dx.doi.org/10.1557/jmr.2007.0252.
Testo completoLiu, Ze, Jinkui Chu, Ran Zhang, Chuanlong Guan e Yuanyi Fan. "Preparation of an Integrated Polarization Navigation Sensor via a Nanoimprint Photolithography Process". Photonics 9, n. 11 (27 ottobre 2022): 806. http://dx.doi.org/10.3390/photonics9110806.
Testo completoSnetkov, Petr P., Kseniia S. Zakharova, Maria I. Tyanutova, Svetlana N. Morozkina, Roman O. Olekhnovich e Mayya V. Uspenskaya. "THE STUDY OF THE PHYSICAL PROPERTIES OF AQUEOUS-ORGANIC HYALURONAN ELECTROSPINNING SOLUTIONS". Bulletin of the Saint Petersburg State Institute of Technology (Technical University) 55 (2020): 16–21. http://dx.doi.org/10.36807/1998-9849-2020-55-81-16-21.
Testo completoHsiao, Alexander P., e Michael J. Heller. "Electric-Field-Directed Self-Assembly of Active Enzyme-Nanoparticle Structures". Journal of Biomedicine and Biotechnology 2012 (2012): 1–9. http://dx.doi.org/10.1155/2012/178487.
Testo completoHashimoto, Masaaki, e Yoshihiro Taguchi. "Design and Fabrication of a Kirigami-Inspired Electrothermal MEMS Scanner with Large Displacement". Micromachines 11, n. 4 (30 marzo 2020): 362. http://dx.doi.org/10.3390/mi11040362.
Testo completoPeng, Zilong, Nairui Gou, Zilong Wei, Jiawei Zhao, Fei Wang, Jianjun Yang, Yinan Li e Hongbo Lan. "Fabrication of a Large-Area, Fused Polymer Micromold Based on Electric-Field-Driven (EFD) μ-3D Printing". Polymers 11, n. 11 (18 novembre 2019): 1902. http://dx.doi.org/10.3390/polym11111902.
Testo completoKranz, Michael, Mark Allen e Tracy Hudson. "In-Situ Wafer-Level Polarization of Electret Films in MEMS Acoustic Sensor Arrays". Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2011, DPC (1 gennaio 2011): 001732–60. http://dx.doi.org/10.4071/2011dpc-wp24.
Testo completoWang, Wei, Wei Guo Liu, Jin Long Zou e Peng Fei Huo. "A MEMS Safe and Arm Device for Spin Stabilized Ammunition Fuze". Advanced Materials Research 403-408 (novembre 2011): 4593–97. http://dx.doi.org/10.4028/www.scientific.net/amr.403-408.4593.
Testo completoDe Pasquale, Giorgio. "Additive Manufacturing of Micro-Electro-Mechanical Systems (MEMS)". Micromachines 12, n. 11 (8 novembre 2021): 1374. http://dx.doi.org/10.3390/mi12111374.
Testo completoHu, Yanlei, Zhaoxin Lao, Benjamin P. Cumming, Dong Wu, Jiawen Li, Haiyi Liang, Jiaru Chu, Wenhao Huang e Min Gu. "Laser printing hierarchical structures with the aid of controlled capillary-driven self-assembly". Proceedings of the National Academy of Sciences 112, n. 22 (18 maggio 2015): 6876–81. http://dx.doi.org/10.1073/pnas.1503861112.
Testo completoJoshi-Imre, Alexandra, e Sven Bauerdick. "Direct-Write Ion Beam Lithography". Journal of Nanotechnology 2014 (2014): 1–26. http://dx.doi.org/10.1155/2014/170415.
Testo completoLiu, Yuxia, Kai Jiang e Shuting Yang. "Integrated Anode Electrode Composited Cu–Sn Alloy and Separator for Microscale Lithium Ion Batteries". Materials 12, n. 4 (18 febbraio 2019): 603. http://dx.doi.org/10.3390/ma12040603.
Testo completoChi, Xiang, Xinyu Zhang, Zongan Li, Zhe Yuan, Liya Zhu, Feng Zhang e Jiquan Yang. "Fabrication of Microfluidic Chips Based on an EHD-Assisted Direct Printing Method". Sensors 20, n. 6 (11 marzo 2020): 1559. http://dx.doi.org/10.3390/s20061559.
Testo completoHan, Seungkyu, Matthew Zielewski, David Martinez Holguin, Monica Michel Parra e Namsoo Kim. "Optimization of AZ91D Process and Corrosion Resistance Using Wire Arc Additive Manufacturing". Applied Sciences 8, n. 8 (6 agosto 2018): 1306. http://dx.doi.org/10.3390/app8081306.
Testo completoZhang, Jianrui, Yabin Yan e Bo Li. "Selective Laser Melting (SLM) Additively Manufactured CoCrFeNiMn High-Entropy Alloy: Process Optimization, Microscale Mechanical Mechanism, and High-Cycle Fatigue Behavior". Materials 15, n. 23 (1 dicembre 2022): 8560. http://dx.doi.org/10.3390/ma15238560.
Testo completoHuan, Junjun, Vamsy P. Chodavarapu, George Xereas e Charles Allan. "Microfabrication and Packaging Process for a Single-Chip Position, Navigation, and Timing System". International Symposium on Microelectronics 2017, n. 1 (1 ottobre 2017): 000208–14. http://dx.doi.org/10.4071/isom-2017-wa25_143.
Testo completoJain, Vivek, Apurbba Kumar Sharma e Pradeep Kumar. "Recent Developments and Research Issues in Microultrasonic Machining". ISRN Mechanical Engineering 2011 (4 aprile 2011): 1–15. http://dx.doi.org/10.5402/2011/413231.
Testo completoXu, Jiushuai, Klass Strempel, Hao Zhou, Andreas Waag, Maik Bertke, Angelika Schmidt e Erwin Peiner. "Area-Selective Growth of Aligned ZnO Nanorod Arrays for MEMS Device Applications". Proceedings 2, n. 13 (23 novembre 2018): 887. http://dx.doi.org/10.3390/proceedings2130887.
Testo completoPereira, G. S., C. P. Oliveira e J. A. Souza. "COMPARISON BETWEEN TWO WAYS OF MODELING THE FLOW RESISTANCE IN A POROUS MEDIUM". Revista de Engenharia Térmica 22, n. 1 (28 aprile 2023): 40. http://dx.doi.org/10.5380/reterm.v22i1.90974.
Testo completoGao, Kuan, Xin Zhang, Baoxi Liu, Jining He, Jianhang Feng, Puguang Ji, Wei Fang e Fuxing Yin. "The Deformation Characteristics, Fracture Behavior and Strengthening-Toughening Mechanisms of Laminated Metal Composites: A Review". Metals 10, n. 1 (19 dicembre 2019): 4. http://dx.doi.org/10.3390/met10010004.
Testo completoSulaiman H., A. J., M. H. Aiman, M. Ishak, M. M. Quazi, T. Zaharinie e T. Ariga. "Vacuum brazing of titanium alloy to stainless steel enhance by fiber laser surface texturing". Journal of Mechanical Engineering and Sciences 15, n. 4 (15 dicembre 2021): 8601–7. http://dx.doi.org/10.15282/jmes.15.4.2021.12.0678.
Testo completoLee, Sung, Hoon Yi, Cheol Park, Hoon Jeong e Moonkyu Kwak. "Continuous Tip Widening Technique for Roll-to-Roll Fabrication of Dry Adhesives". Coatings 8, n. 10 (30 settembre 2018): 349. http://dx.doi.org/10.3390/coatings8100349.
Testo completoDodampegama, Shanuka, Amith Mudugamuwa, Menaka Konara, Nisal Perera, Dinindu De Silva, Uditha Roshan, Ranjith Amarasinghe, Nirosh Jayaweera e Hiroki Tamura. "A Review on the Motion of Magnetically Actuated Bio-Inspired Microrobots". Applied Sciences 12, n. 22 (14 novembre 2022): 11542. http://dx.doi.org/10.3390/app122211542.
Testo completoHuang, Hong, e Theresa Hill. "Understanding Key Factors during Dod Inkjet Printing Towards Precise Fabrication of Micro Energy Systems". ECS Meeting Abstracts MA2022-01, n. 35 (7 luglio 2022): 1430. http://dx.doi.org/10.1149/ma2022-01351430mtgabs.
Testo completo