Bibliografie tematiche / Metallurgy

Indice

  1. Articoli di riviste
  2. Tesi
  3. Libri
  4. Capitoli di libri
  5. Atti di convegni
  6. Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Metallurgy"

Autore: Grafiati
Pubblicato: 4 giugno 2021
Ultima modifica: 31 agosto 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Metallurgy".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Metallurgy"

1

Harris, J. "Engineering metallurgy: Part 1 Applied physical metallurgy". International Materials Reviews 39, n. 5 (gennaio 1994): 213–14. http://dx.doi.org/10.1179/imr.1994.39.5.213.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Skoromnaya, Stella. "Supercritical metallurgy". Bulletin of the National Technical University «KhPI» Series: New solutions in modern technologies, n. 1(3) (5 aprile 2020): 35–42. http://dx.doi.org/10.20998/2413-4295.2020.03.05.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Hueckel, Theodore, e Stefano Sacanna. "Colloidal metallurgy". Nature Chemistry 13, n. 6 (giugno 2021): 514–15. http://dx.doi.org/10.1038/s41557-021-00723-0.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

ONOUE, Toshio. "Vacuum metallurgy." SHINKU 30, n. 12 (1987): 1024–26. http://dx.doi.org/10.3131/jvsj.30.1024.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Ball, Philip. "Stellar metallurgy". Nature Materials 13, n. 5 (22 aprile 2014): 431. http://dx.doi.org/10.1038/nmat3954.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

LABRUM, D. "POWDER METALLURGY". Journal of the American Society for Naval Engineers 62, n. 1 (18 marzo 2009): 63–98. http://dx.doi.org/10.1111/j.1559-3584.1950.tb02679.x.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Haasen, Peter, e J. M. Galligan. "Physical Metallurgy". Journal of Engineering Materials and Technology 109, n. 2 (1 aprile 1987): 176. http://dx.doi.org/10.1115/1.3225960.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Harris, Jack, John W. Martin e Edward A. Little. "‘Physical metallurgy’". Materials Science and Technology 13, n. 8 (agosto 1997): 705–6. http://dx.doi.org/10.1179/mst.1997.13.8.705.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Eberhart, M. "Computational Metallurgy". Science 265, n. 5170 (15 luglio 1994): 332–33. http://dx.doi.org/10.1126/science.265.5170.332.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

J. Raub, Christoph. "Physical metallurgy". Journal of Alloys and Compounds 261, n. 1-2 (settembre 1997): 313. http://dx.doi.org/10.1016/s0925-8388(97)00183-7.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "Metallurgy"

1

Hoffman, Kelsey Llyn. "Neutron star metallurgy". Thesis, University of British Columbia, 2011. http://hdl.handle.net/2429/38311.

Testo completo
Abstract (sommario):
The crust of a neutron star plays an important role in the emission observed from it. The thermal emission generated in the core of the neutron star passes through the crust, thus it is important to know what is in the crust in order to understand how the emission is shaped and altered. The crust itself may be responsible for the observations of glitches from neutron stars and also as a source of gravitational waves. This thesis is two-fold. The first goal is to calculate the composition of the neutron star crust of a non-accreting neutron star. The second is to use the calculated crustal compositions in molecular dynamics simulations in order to determine the shear modulus and breaking strain of the crustal material. The composition of the crust is found to be dependent on how the neutron star cooled. Nuclear reactions within the crust are quenched as the star cools. The composition of the crust, envelope, and atmosphere are calculated after the nuclear reactions are quenched. With the settling timescales of the various isotopes in the crust, some of these isotopes are able to float up to the neutron star surface and form the atmosphere. Three different cooling methods were used in these calculations – modified Urca cooling, a thick crust and a thin crust – each produces different atmospheric and crustal compositions. The calculated crustal abundances are then used as initial conditions in molecular dynamics simulations. A shear force is introduced by deforming the simulation box. The shear modulus and breaking strain are calculated for the three different crustal compositions as well as for perfect pure face-centered cubic (FCC) and body-centered cubic (BCC) systems. The upper limit, from the perfect crystal lattice structure, on the breaking strain is found to ~0.11 − 0.12 and the shear modulus is found to be 6.5 × 10³º dyne/cm². These properties predict glitch amplitudes of ∆Ω/Ω∼10⁻³. The gravitational wave strain amplitudes for PSR J2124- 3358 are also predicted to be greater than the observed upper limits. This indicates that the neutron star crust is not a perfect BCC lattice which deformed to 10% of the maximum.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Bennett, Anna. "Copper metallurgy in central Thailand". Thesis, University of London, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.338123.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Konchenko, Ekaterina. "Resource saving technology in metallurgy". Thesis, Видавництво СумДУ, 2007. http://essuir.sumdu.edu.ua/handle/123456789/12836.

Testo completo
Abstract (sommario):
The consumption of coal and coke in the blast furnace is met on the one hand by the market or on the other hand by the own production. It depends on the conditions of the market and the availability of production facilities. World-wide the production of hot metal and crude steel via the blast furnace/converter route is regarded as the dominant process line also in future. Consequently, after their successes in the past, the ironmaking and steelmaking industry have joined their efforts with the cokemaking industry to exploit still more development potentials for hot metal production. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/12836
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Смоленніков, Денис Олегович, Денис Олегович Смоленников, Denys Olehovych Smolennikov, Надія Миколаївна Костюченко, Надежда Николаевна Костюченко, Nadiia Mykolaivna Kostiuchenko e Yu Nadtochiy. "Environmentally friendly metallurgy in Ukraine". Thesis, Сумський державний університет, 2013. http://essuir.sumdu.edu.ua/handle/123456789/31624.

Testo completo
Abstract (sommario):
According to the report of international analytical organization World Steel Association (WSA), Ukraine took the 10th place in the world’s steel production in 2012. Traditional steel smelting technology such as usage of Marten’s furnaces with natural gas as fuel causes 3 million tons of waste products a year per one furnace. Pollutants include NOx, CO, SOx and heavy metals dust. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/31624
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Morgan, Martha E. "Reconstructing Early Islamic Maghribi Metallurgy". Diss., The University of Arizona, 2009. http://hdl.handle.net/10150/194119.

Testo completo
Abstract (sommario):
Interactions in culture, science, and technology in early Islamic North Africa are studied through an examination of Maghribi metallurgy. My dissertation, based on the Social/Cultural Construction of Technology (SCOT) model (Bijker 1997), explores the impact of the Islamic religion and culture on scientific and technological change in the spheres of gold and silver minting, copper working, and iron smelting towards reconstructing the role and impact of metals in Islamic society. The purpose of my reconstruction is to define and contextualize early Islamic Maghribi metallurgy for a region and time period poorly defined in the history of metallurgical technology. The development of this history of technology involves the investigation of technical design within a religious framework, presenting explanations for the motivations of the use of certain metals from both their intrinsic and instrumental properties. This specialized history is important in that it provides information of significance on the larger scope of the history of technology and science and on the structure of Islamic society. This study uses multiple lines of evidence, including historical documents, numismatic evidence, and archaeological data in an effort to situate the role of early Islamic Maghribi metallurgy into the framework of the history of African metallurgy. The religious and cultural meanings of metals are outlined through the compilation of their mention in the qur’ān, the Hadīth, and the chronicles of travelers. Coinage survey positions the political and economic role of the Islamic state, and addresses the stability of western-periphery polities within the state and the concerns of a dogmatically motivated bimetal system. The site of al-Basra, Morocco, a state mint under the Idrisid rule (A.D. 788-959), is the source for the excavated metal materials; the metal artifacts, unprocessed minerals, slag, non-metal tools associated with the metal production, and metallurgical facilities are described in their historical context. This dissertation presents, for the first time ever, an English translation of al-dawHa al-mushtabika fī DawābiT dār al-sika (The Intricate Tree in the Realm of the House of Minting). This fourteenth century Arabic text details the meaning, production, and uses of metals in medieval Islamic society, and serves as a unit of study within Maghribi metallurgical technology. An ethnographic study of the metal artisans of Fes, Morocco provides a modern-day reflection to this reconstruction. This study supports the SCOT methodology by identifying the relationships between scientific and technological practices and systems of belief. The Islamic culture and its practices -- which were part codified religion, part belief system -- were subject to change based on the contextual situations of the society. This study demonstrates that the society’s metallurgical practices were subject to the same conditions. The metallurgical know-how within Islamic Maghribi society was, and is, a direct reflection of the unifying themes embedded in the culture.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Holmes, Shaun Ryan. "Powder metallurgy dual alloy disc solutions". Thesis, University of Cambridge, 2012. https://www.repository.cam.ac.uk/handle/1810/252259.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Mellanby, I. J. "The fatigue of powder metallurgy steels". Thesis, University of Nottingham, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.328433.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Weeks, L. R. "Pre-Islamic metallurgy of the Gulf". Thesis, The University of Sydney, 2000. https://hdl.handle.net/2123/27763.

Testo completo
Abstract (sommario):
The thesis presents a study of early metal production, exchange and use in the Gulf region. The focus is exclusively on the use of copper and its alloys, from the Bronze Age to the late pre-Islamic period. Issues addressed include technological aspects of early alloy production, the trade in metallic resources in the Gulf region, and the socioeconomic importance of the early use of tin and tin-bronze in early Western Asia.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Correa, Zapisotski David, e Martin Wallhed. "Characterizing flowability of metal powders". Thesis, KTH, Materialvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-254754.

Testo completo
Abstract (sommario):
Powder metallurgy is a growing field with much potential. The core purpose and problem in this work is attempting to describe and understand what and how metal powder properties impact powder flowability. Several powder flow experiments have been performed on eight different metal powders with varying size and of material types to examine correlations and seeing what parameters are important for a well flowing metal powder. Experiments performed consists of hall flow, tap density, angle of repose and a more complex Rheometer analysis. The results found display plenty correlations between different experiments with some deviations as expected due to the nature of occurring errors. The results are all displayed in tables comparing the different metal powders for all experiments. The powder with the best flowability (highly free flowing) scored best across all experiments and tests indicating all tests as significant. A well and free flowing powder is characterized by low values in cohesion, angle of repose, specific energy, etc.
Pulvermetallurgi är en växande industri med stor potential. Syftet samt problemet med detta arbete är att försöka beskriva och förstå vilka pulveregenskaper som är betydande för flödet och hur dessa egenskaper påverkar hur pulvret flödar. Flera olika experiment har utförts på åtta olika metallpulver, av varierande sorter material och pulverstorlek, har utförts för att undersöka samband och se vilka pulveregenskaper som är viktiga för ett metallpulver ska ha eftertraktade flödesegenskaper. Utförda experiment består av Hall flöde, tappdensitet, rasvinkel (angle of repose) samt en mer komplex Rheometer analys. Resultaten visar många samband mellan olika experiment och metallpulver med en del avvikelser som väntat på grund av flertalet felkällor. Resultaten för alla pulver och experiment uppvisas i stapelgrafer för enkel överblick och jämförelse. Metallpulvret som påvisade bäst flödesegenskaper (fritt flödande pulver) rankades som bästa pulver i varje experiment vilket indikerar att alla experiment är relevanta. Ett väl flödande metallpulver indikeras av låga värden på kohesion, rasvinkel, specifik energi osv.
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Caliskan, Necmettin Kaan. "Powder Metallurgy Of W-ni-cu Alloys". Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/2/12607576/index.pdf.

Testo completo
Abstract (sommario):
In the present study
the effects of the powder metallurgical parameters such as the mixing method, compaction pressure, initial tungsten (W) particle size, composition, sintering temperature and sintering time on the sintering behavior of selected high density W-Ni-Cu alloys were investigated. The alloys were produced through conventional powder metallurgy route of mixing, cold compaction and sintering. The total solute (Ni-Cu) content in the produced alloys was kept constant at 10 wt%, while the copper concentration of the solutes was varied from 2.5 wt% to 10 wt%. Mainly liquid phase sintering method was applied in the production of the alloys. The results of the study were based on the density measurements, microstructural characterizations including optical and scanning electron microscopy and mechanical characterizations including hardness measurements. The results showed that the nature of the mixing method applied in the preparation of the powder mixtures has a considerable effect on the final sintered state of W-Ni-Cu alloys. Within the experimental limits of the study, the compaction v pressure and initial W particle size did not seem to affect the densification behavior. It was found that the sintering behavior of W-Ni-Cu alloys investigated in this study was essentially dominated by the Ni content in the alloy and the sintering temperature. A high degree of densification was observed in these alloys with an increase in the Ni content and sintering temperature which was suggested to be due to an increase in the solubility and diffusivity of W in the binder matrix phase with an increase in these parameters, leading to an increase in the overall sintering kinetics. Based on the results obtained in the present study, a model explaining the kinetics of the diffusional processes governing the densification and coarsening behavior of W-Ni-Cu alloys was proposed.
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Libri sul tema "Metallurgy"

1

Moniz, B. J. Metallurgy. 3a ed. Homewood, Ill: American Technical Publishers, 2003.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Moniz, B. J. Metallurgy. Homewood, Ill: American Technical Publishers, 1992.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

G, Early J., Center for Materials Science (National Measurement Laboratory). Metallurgy Division. e United States. National Bureau of Standards., a cura di. Metallurgy. [Boulder, Colo.?]: U.S. Dept. of Commerce, National Bureau of Standards, 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Brandt, Daniel A. Metallurgy fundamentals. South Holland, Ill: Goodheart-Willcox Co., 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Brandt, Daniel A. Metallurgy fundamentals. Tinley Park, Ill: Goodheart-Willcox, 1999.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Brandt, Daniel A. Metallurgy fundamentals. South Holland, Ill: Goodheart-Willcox Co., 1992.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

C, Warner J., a cura di. Metallurgy fundamentals. 5a ed. Tinley Park, IL: Goodheart-Willcox, 2009.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

C, Warner J., a cura di. Metallurgy fundamentals. Tinley Park, Ill: Goodheart-Willcox, 2005.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Szekely, Julian, Göran Carlsson e Lars Helle. Ladle Metallurgy. New York, NY: Springer New York, 1989. http://dx.doi.org/10.1007/978-1-4612-3538-5.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Maddison, Peter. Basic metallurgy. Bilston: Midland Independent Steel Training Association, 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Capitoli di libri sul tema "Metallurgy"

1

Shafer, Wade H. "Metallurgy". In Masters Theses in the Pure and Applied Sciences, 339–41. Boston, MA: Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-0393-0_26.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Becerra, María Florencia, e María Josefina Pérez Pieroni. "Metallurgy". In Encyclopedia of Global Archaeology, 7071–86. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-30018-0_2715.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Shafer, Wade H. "Metallurgy". In Masters Theses in the Pure and Applied Sciences, 267. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-5969-6_27.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Shafer, Wade H. "Metallurgy". In Masters Theses in the Pure and Applied Sciences, 299–300. Boston, MA: Springer US, 1992. http://dx.doi.org/10.1007/978-1-4615-3412-9_27.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Shafer, Wade H. "Metallurgy". In Masters Theses in the Pure and Applied Sciences, 333–34. Boston, MA: Springer US, 1992. http://dx.doi.org/10.1007/978-1-4615-3474-7_27.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Shafer, Wade H. "Metallurgy". In Masters Theses in the Pure and Applied Sciences, 329–31. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-0599-6_27.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Shafer, Wade H. "Metallurgy". In Masters Theses in the Pure and Applied Sciences, 316–17. Boston, MA: Springer US, 1986. http://dx.doi.org/10.1007/978-1-4684-5197-9_27.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Becerra, María Florencia, e María Josefina Pérez Pieroni. "Metallurgy". In Encyclopedia of Global Archaeology, 1–16. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-51726-1_2715-1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Shafer, Wade H. "Metallurgy". In Masters Theses in the Pure and Applied Sciences, 276–77. Boston, MA: Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-2832-6_27.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Shafer, Wade H. "Metallurgy". In Masters Theses in the Pure and Applied Sciences, 221–22. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4757-5782-8_27.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Metallurgy"

1

Růžička, Jan, Mario Machů e Jan Haščin. "ARCHaEOMETALLURGY – experimental ferrous metallurgy". In METAL 2020. TANGER Ltd., 2020. http://dx.doi.org/10.37904/metal.2020.3454.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Koshelev, M. V., A. G. Prigunova e A. G. Vernidub. "THE EFFECTS OF MN ADDITION FOR THE PREDICTION OF THE THIXOFORMABILITY OF FE-CONTAINING AL-SI BASED ALLOYS". In Foundry. Metallurgy. 2023. Physico-Technological Institute of Metals and Alloys of NAS of Ukraine, Kyiv, Ukraine, 2023. http://dx.doi.org/10.15407/foundry-metallurgy-2023.017.

Testo completo
Abstract (sommario):
The effects of Mn addition for the prediction of the thixoformability of Fe-containing Al-Si based alloys have been investigated by DTA and optical microscopy. The experimental findings clearly demonstrated that altered Mn/Fe ratios (up to 0.7) in the studied alloys can reduce temperature sensitivity of liquid fraction (dfL/dT0.3–0.5) and enlarge to a large extent the solidification temperature interval and the temperature window between 30% and 50% fraction liquid. Moreover, with increasing Mn/Fe ratio from 0.3 to 0.7 plate-like β-Al5FeSi phase transforms to a more compact α* - Al(FeMn)Si phase which are more favorable for the semi-solid forming technology.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Borisov, А. G., e V. I. Belik. "Morphological features of structures obtained by two-stage crystallization of Al – 7.5 wt. % Si alloy". In Foundry. Metallurgy. 2024. Physico-Technological Institute of Metals and Alloys of NAS of Ukraine, Kyiv, Ukraine, 2024. http://dx.doi.org/10.15407/foundry-metallurgy-2024.040.

Testo completo
Abstract (sommario):
Morphological features of structures obtained by two-stage crystallization of Al – 7.5 wt. % Si alloy were studied. Alloy with composition Al - 7,5wt. % Si; 0,29 wt. %Mg; 0,12 wt. %Fe; 0,028 wt. % Mn; 0,005 wt. %Cu; 0,0015 wt. % Ti. was used. To control the formation of the structure of the initial alpha phase, thermal, temporal, and force effects on the melt in a thermostat were used. The formation of the structure of the final alpha phase was achieved using various thermal modes of solidification of the casting from a liquid metal suspension in a metal mold. As a result of the experiments, almost the entire spectrum of morphologies characteristic of semi-solid rheocasting processes of A356 was obtained. The possibility of controlling the structure of pseudocomposites for A356 alloy by combining the morphologies of the initial and final α-phases has been experimentally demonstrated. The formation of such pseudocomposites is also fundamentally possible for other alloys, which are characterized by the formation of both dendritic and rosette mophologies, for example, alloys based on Al, Cu, Fe, Co, Ni. Application of various methods of melt treatment at the first stage of crystallization makes it possible to obtain three different types of morphology of the initial alpha phase - dendritic, rosette and globular. Keywords: Al-based alloys, melt treatment, crystallization, microstructure
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Floreen, S., G. E. Fuchs e W. J. Yang. "The Metallurgy of Alloy 625". In Superalloys. TMS, 1994. http://dx.doi.org/10.7449/1994/superalloys_1994_13_37.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Jansto, S. "New Generation Structural Steel Metallurgy". In MS&T17. MS&T17, 2017. http://dx.doi.org/10.7449/2017/mst_2017_482_489.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Jansto, S. "New Generation Structural Steel Metallurgy". In MS&T17. MS&T17, 2017. http://dx.doi.org/10.7449/2017mst/2017/mst_2017_482_489.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

ALYMOV, M. I. "POWDER METALLURGY OF CONSOLIDATED NANOMATERIALS". In СИНТЕЗ И КОНСОЛИДАЦИЯ ПОРОШКОВЫХ МАТЕРИАЛОВ. TORUS PRESS, 2018. http://dx.doi.org/10.30826/scpm2018001.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Sanderow, Howard I. "The Global Powder Metallurgy Database". In SAE 2005 World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2005. http://dx.doi.org/10.4271/2005-01-0712.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Kuznetsov, A. A. "Space metallurgy: New development opportunities". In XLV ACADEMIC SPACE CONFERENCE, DEDICATED TO THE MEMORY OF ACADEMICIAN S.P. KOROLEV AND OTHER OUTSTANDING NATIONAL SCIENTISTS — PIONEERS OF SPACE EXPLORATION. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0108007.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

"Mining production, mechanical engineering and metallurgy". In 2007 International Forum on Strategic Technology. IEEE, 2007. http://dx.doi.org/10.1109/ifost.2007.4798629.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Metallurgy"

1

Freibert, Franz J. Plutonium Metallurgy. Office of Scientific and Technical Information (OSTI), agosto 2012. http://dx.doi.org/10.2172/1048385.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Kippen, Karen E., David J. Alexander e Dan J. Thoma. MST-6: Metallurgy. Office of Scientific and Technical Information (OSTI), novembre 2013. http://dx.doi.org/10.2172/1107992.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Flumerfelt, J. F. Aluminum powder metallurgy processing. Office of Scientific and Technical Information (OSTI), febbraio 1999. http://dx.doi.org/10.2172/348922.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Pugh, E. N., e J. H. Smith. Metallurgy -- technical activities - 1988. Gaithersburg, MD: National Bureau of Standards, 1988. http://dx.doi.org/10.6028/nist.ir.88-3843.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Pugh, E. N., e J. H. Smith. Technical activities 1989 -- Metallurgy. Gaithersburg, MD: National Institute of Standards and Technology, 1989. http://dx.doi.org/10.6028/nist.ir.89-4151.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Pugh, E. N., e J. H. Smith. Metallurgy, technical activities 1991. Gaithersburg, MD: National Institute of Standards and Technology, 1990. http://dx.doi.org/10.6028/nist.ir.4397.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Pugh, E. N., e S. C. Hardy. Metallurgy, technical activities 1995. Gaithersburg, MD: National Institute of Standards and Technology, 1994. http://dx.doi.org/10.6028/nist.ir.5750.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Handwerker, C. A., e R. J. Schaefer. Metallurgy, technical activities 1996. Gaithersburg, MD: National Institute of Standards and Technology, 1995. http://dx.doi.org/10.6028/nist.ir.5965.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Handwerker, CA, e R. J. Schaefer. Metallurgy, technical activities 1997. Gaithersburg, MD: National Institute of Standards and Technology, 1996. http://dx.doi.org/10.6028/nist.ir.6066.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Foecke, Tim. Metallurgy of the RMS Titanic. Gaithersburg, MD: National Institute of Standards and Technology, 1998. http://dx.doi.org/10.6028/nist.ir.6118.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Ti possono interessare anche gli elenchi estesi di opere sul tema "Metallurgy":
Articoli di riviste Tesi Libri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia