Accedi

Bibliografie tematiche / Metallized film capacitor / Articoli di riviste

Segui questo link per vedere altri tipi di pubblicazioni sul tema: Metallized film capacitor.

Articoli di riviste sul tema "Metallized film capacitor"

Autore: Grafiati

Pubblicato: 21 dicembre 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Metallized film capacitor".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.

1

Jia Zhanqiang, 贾占强, 蔡金燕 Cai Jinyan, 梁玉英 Liang Yuying e 韩春辉 Han Chunhui. "Reliability assessment of metallized film pulse capacitor". High Power Laser and Particle Beams 23, n. 1 (2011): 272–76. http://dx.doi.org/10.3788/hplpb20112301.0272.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Vuillermet, Y., O. Chadebec, J. M. Lupin, A. Saker, G. Meunier e J. L. Coulomb. "Optimization of Low-Voltage Metallized Film Capacitor Geometry". IEEE Transactions on Magnetics 43, n. 4 (aprile 2007): 1569–72. http://dx.doi.org/10.1109/tmag.2007.892473.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Ho, Janet, T. Jow e Steven Boggs. "Implications of advanced capacitor dielectrics for performance of metallized film capacitor windings". IEEE Transactions on Dielectrics and Electrical Insulation 15, n. 6 (dicembre 2008): 1754–60. http://dx.doi.org/10.1109/tdei.2008.4712681.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Du, Guoqiang, e Jie Zhang. "Capacitance Evaluation of Metallized Polypropylene Film Capacitors Considering Cumulative Self-Healing Damage". Electronics 13, n. 14 (22 luglio 2024): 2886. http://dx.doi.org/10.3390/electronics13142886.

Testo completo

Abstract (sommario):

Self-healing (SH) in metallized polypropylene film capacitors (MPPFCs) can lead to irreversible damage to electrode and dielectric structures, resulting in capacitance loss and significant stability degradation, especially under cumulative SH conditions. To enhance the reliability assessment of MPPFCs post-SH, this study conducted SH experiments on MPPFCs, examined the damage patterns of the electrodes and dielectric films, and proposed a novel capacitance evaluation method for MPPFCs under cumulative SH conditions. The results reveal that with increasing SH voltage, the number of dielectric layers experiencing single SH breakdowns rises, SH energy significantly escalates, and the loss area of the electrode due to high-temperature evaporation expands. Under cumulative SH conditions, the number of SH events is linearly correlated with the total number of SH-breakdown film layers and shows an exponential decay with the average single SH energy. By utilizing a Support Vector Machine (SVM) to classify the SH condition and damage features within the capacitor based on the correlation and distribution patterns of SH feature parameters, this study introduces an advanced method for evaluating the capacitance of MPPFCs under cumulative SH conditions. This method promises to improve the predictive maintenance and reliability of power electronic systems utilizing MPPFCs.

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Li Hua, Lin Fuchang, Zhong Heqing, Dai Ling, Han Yongxia e Kong Zhonghua. "Study on Metallized Film Capacitor and Its Voltage Maintaining Performance". IEEE Transactions on Magnetics 45, n. 1 (gennaio 2009): 327–30. http://dx.doi.org/10.1109/tmag.2008.2008863.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Chen Yaohong, 陈耀红, 章妙 Zhang Miao, 李化 Li Hua, 林福昌 Lin Fuchang, 李智威 Li Zhiwei, 吕霏 Lü Fei e 刘德 Liu De. "Insulation resistance characteristics of metallized film capacitor under high electric field". High Power Laser and Particle Beams 24, n. 4 (2012): 797–800. http://dx.doi.org/10.3788/hplpb20122404.0797.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Kong, M. G., e Y. P. Lee. "Impact of surface discharge plasmas on performance of a metallized film capacitor". Journal of Applied Physics 90, n. 6 (15 settembre 2001): 3069–78. http://dx.doi.org/10.1063/1.1389072.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Li, Hua, Yaohong Chen, Fuchang Lin, Bo Peng, Fei Lv, Miao Zhang e Zhiwei Li. "The capacitance loss mechanism of metallized film capacitor under pulsed discharge condition". IEEE Transactions on Dielectrics and Electrical Insulation 18, n. 6 (dicembre 2011): 2089–94. http://dx.doi.org/10.1109/tdei.2011.6118648.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Dai, Xiying, Zhaoliang Xing, Wei Yang, Chong Zhang, Fei Li, Xin Chen, Chen Li, Jianjun Zhou e Lin Li. "The Effect of Annealing on the Structure and Electric Performance of Polypropylene Films". International Journal of Polymer Science 2022 (8 novembre 2022): 1–12. http://dx.doi.org/10.1155/2022/5970484.

Testo completo

Abstract (sommario):

Biaxially oriented polypropylene (BOPP) and uniaxially oriented polypropylene (UOPP) films were annealed. The effect of annealing temperature (Ta) on dielectric strength was studied. The electric breakdown strength (Eb) of BOPP and UOPP films changes in a quite different trend with the annealing process. Eb of BOPP films decreases with the increase in Ta, whereas Eb of UOPP films increases first and then decreases with Ta. The structural changes during annealing were investigated. The crystallinity rises with Ta, while the orientation degree and Eb show a similar trend with Ta. Although the crystallinity and crystal structure can affect Eb of polypropylene films, the orientation of chain segments has a much larger correlation with Eb. Our results indicate that the deterioration of the metallized BOPP film capacitor may originate from the orientation degree decrease of chain segments after experiencing high temperature.

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Yoon, Jung-Rag, Young-Kwang Kim, Serk-Won Lee e Heun-Young Lee. "The Design and Reliability Evaluation of Metallized Film Capacitor for Power Electronic Applications". Journal of the Korean Institute of Electrical and Electronic Material Engineers 24, n. 5 (1 maggio 2011): 381–86. http://dx.doi.org/10.4313/jkem.2011.24.5.381.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

11

Peng, Bao Hua, J. L. Zhou e Jing Feng. "Product Reliability Assessment Method Combining Degradation Data and Lifetime Data". Advanced Materials Research 44-46 (giugno 2008): 795–802. http://dx.doi.org/10.4028/www.scientific.net/amr.44-46.795.

Testo completo

Abstract (sommario):

Reliability of products has long been considered as an important quality characteristic. Traditional methods of product reliability assessment are based on lifetime data. With products being much more reliable and the growing need for developing new products within shorter period and at lower cost, we can hardly get enough lifetime data in many cases. Performance degradation data can also be used for reliability assessment. Recently, they are found to be useful in some cases where they are easier to collect. But when performance degradation data are also limited and some lifetime data are available, it is preferred to utilize both information sources. This paper deals with the problem of reliability assessment combining both performance degradation data and lifetime data. It is assumed that two samples from the same product are tested differently. Degradation data are collected from one sample and lifetime data from the other. First, the performance degradation model is established, using either statistical methods or methods from physics of failure. Then lifetime of the product, which is defined as the first time when the performance crosses the known failure threshold, is calculated. The MLE method is used for parameter estimation where the maximum likelihood function is multiplication of the one from degradation data and the one from lifetime data. To illustrate the proposed method, an example of the metallized film capacitor, which is used in inertial confinement fusion (ICF) facility, is given. We model the performance degradation data of metallized film capacitor with Wiener process with drift. The failure of the capacitor is defined as the first time when its capacitance drops below a threshold. The lifetime distribution is deduced and the parameters are estimated from the joint maximum likelihood function. A comparison is conducted between the assessment results of degradation data only and those of combination of degradation data and lifetime data. In conclusion we propose that both degradation information and lifetime information should be used when neither of them is sufficient enough for reliability assessment. Some directions for future work are also discussed.

Gli stili APA, Harvard, Vancouver, ISO e altri

12

Tai, Yunxiao, Pengqi Chen, Yang Jian, Qingqing Fang, Dang Xu e Jigui Cheng. "Failure mechanism and life estimate of metallized film capacitor under high temperature and humidity". Microelectronics Reliability 137 (ottobre 2022): 114755. http://dx.doi.org/10.1016/j.microrel.2022.114755.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

13

Zhang, Yong-Xin, Qi-Kun Feng, Shao-Long Zhong, Jia-Yao Pei, Fang-Yi Chen, Guan-Nan He e Zhi-Min Dang. "Digital twin accelerating development of metallized film capacitor: Key issues, framework design and prospects". Energy Reports 7 (novembre 2021): 7704–15. http://dx.doi.org/10.1016/j.egyr.2021.10.116.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

14

Lv, Chunlin, Jinjun Liu, Yan Zhang, Wanjun Lei e Rui Cao. "An improved lifetime prediction method for metallized film capacitor considering harmonics and degradation process". Microelectronics Reliability 114 (novembre 2020): 113892. http://dx.doi.org/10.1016/j.microrel.2020.113892.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

15

Qi, Xiaoguang, e Steven Boggs. "Electrothermal failure of metallized film capacitor end connections–computation of temperature rise at connection spots". Journal of Applied Physics 94, n. 7 (ottobre 2003): 4449–56. http://dx.doi.org/10.1063/1.1602947.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

16

Chen, Yaohong, Hua Li, Fuchang Lin, Fei Lv, Miao Zhang, Zhiwei Li e De Liu. "Study on Self-Healing and Lifetime Characteristics of Metallized-Film Capacitor Under High Electric Field". IEEE Transactions on Plasma Science 40, n. 8 (agosto 2012): 2014–19. http://dx.doi.org/10.1109/tps.2012.2200699.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

17

H. Lean, Meng, e Wei-Ping L. Chu. "Simulation of charge packet formation in layered polymer film". COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering 33, n. 4 (1 luglio 2014): 1396–415. http://dx.doi.org/10.1108/compel-09-2013-0291.

Testo completo

Abstract (sommario):

Purpose – The purpose of this paper is to describe a rapid and robust axisymmetric hybrid algorithm to create dynamic temporal and spatial charge distributions, or charge map, in the simulation of bipolar charge injection using Schottky emission and Fowler-Nordheim tunneling, field-dependent transport, recombination, and bulk and interfacial trapping/de-trapping for layered polymer films spanning the range from initial injection to near breakdown. Design/methodology/approach – This hybrid algorithm uses a source distribution technique based on an axisymmetric boundary integral equation method (BIEM) to solve the Poisson equation and a fourth-order Runge-Kutta (RK4) method with an upwind scheme for time integration. Iterative stability is assured by satisfying the Courant-Friedrichs-Levy (CFL) stability criterion. Dynamic charge mapping is achieved by allowing conducting and insulating boundaries and material interfaces to be intuitively represented by equivalent free and bound charge distributions that collectively satisfy all local and far-field conditions. Findings – Charge packets cause substantial increase of electric stress and could accelerate the breakdown of polymeric capacitors. Conditions for the creation of charge packets are identified and numerically demonstrated for a combination of impulsive step excitation, high charge injection, and discontinuous interface. Originality/value – Metallized bi-axially oriented polypropylene (BOPP) dielectric thin film capacitor with self-clearing and enhanced current carrying capability offer an inexpensive and lightweight alternative for efficient power conditioning, energy storage, energy conversion, and pulsed power. The originality is the comprehensive physics and multi-dimensional modeling which span the dynamic range from initial injection to near breakdown. This model has been validated against some empirical data and may be used to identify failure mechanisms such as charge packets, gaseous voids, and electroluminescence. The value lies in the use of this model to develop mitigation strategies, including re-designs and materials matching, to avoid these failure mechanisms.

Gli stili APA, Harvard, Vancouver, ISO e altri

18

Qi, Xiaoguang, e Steven Boggs. "Transient finite element computation of the temperature rise in metallized film capacitor end connections caused by underdamped discharge". IEEE Transactions on Dielectrics and Electrical Insulation 15, n. 1 (2008): 277–83. http://dx.doi.org/10.1109/t-dei.2008.4446761.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

19

Donhowe, Mark, Jeff Lawler, Sean Souffie e E. Lee Stein. "250°C Operating Temperature Dielectric Film Capacitors". Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2011, HITEN (1 gennaio 2011): 000201–6. http://dx.doi.org/10.4071/hiten-paper2-mdonhowe.

Testo completo

Abstract (sommario):

High operating temperature electronic components are needed for a variety of military, aerospace, down-hole, and electric vehicle applications. One of the limiting technologies is the availability of highly reliable capacitors that operate at temperatures greater than 150°C and up through 250°C. This paper introduces a high breakdown strength dielectric film Gore has developed for metallized film capacitors. In addition to exceptionally high breakdown voltages, the 6 μm PTFE film exhibits low dissipation factor and stable capacitance over a wide temperature range. Film properties were tested from −50°C to 250°C and both wound film/foil and metallized film capacitors were fabricated and tested from RT to 300°C.

Gli stili APA, Harvard, Vancouver, ISO e altri

20

Revenok, T. V., V. V. Sleptsov e A. O. Diteleva. "Research of electrode materials for the creation of multifunctional current sources with increased capacity as a components of the energy sector of an efficient urban environment". Construction Materials, n. 9 (9 ottobre 2024): 63–69. http://dx.doi.org/10.31659/0585-430x-2024-828-9-63-69.

Testo completo

Abstract (sommario):

As part of creating a comfortable and safe environment, constructing energy-efficient residential and industrial buildings and structures that meet modern requirements and standards, the development of the production of environmentally friendly renewable and new individual energy sources is becoming especially relevant. In this regard, there is a need to increase the energy capacity of electrochemical cells. Research has been carried out on the metallized conductive materials creation based on rolled carbon non-woven material “Busofit” with the sequential application of metal coatings of titanium and silver using ion-plasma sputtering and electric pulse dispersion methods. It has been shown that surface layer metallization of the electrode material with titanium can improve the electrochemical cell characteristics. Additional silver film deposition leads to further cell performance improvement. It has been confirmed that the multilayer structure interfacial resistance between the carbon and the current collector has a significant effect on the conductivity of the electrochemical cell and the stability of its operation. The contact area increase of the electrode with the electrolyte leads to an increase in the rate processes occurring on the electrode surface and in the near-electrode space, which opens up prospects for increasing the energy intensity of the electrochemical system. A significant capacity increase of a water-based capacitor structure is achieved by the formation of a nanostructured dielectric layer of potassium titanate in the interelectrode space. It has been confirmed that the cell voltage cycling helps to stabilize the processes occurring in the surface layer of the electrode material at the interface and determining the range of mechanisms for transmitting electrical energy, which makes it possible to achieve higher energy intensity of the samples. Improvement of technological solutions in the field of ion-plasma technologies and the use of new perspective nanostructured materials creates the prerequisites for the creation of advanced automation and energy supply systems with a higher resource, which expands the possibilities of their use in various construction projects.

Gli stili APA, Harvard, Vancouver, ISO e altri

21

Rytöluoto, Ilkka, Minna Niittymäki, Paolo Seri, Hadi Naderiallaf, Kari Lahti, Eetta Saarimäki, Timo Flyktman e Mika Paajanen. "Biaxially oriented silica–polypropylene nanocomposites for HVDC film capacitors: morphology-dielectric property relationships, and critical evaluation of the current progress and limitations". Journal of Materials Chemistry A 10, n. 6 (2022): 3025–43. http://dx.doi.org/10.1039/d1ta10336a.

Testo completo

Abstract (sommario):

Investigation of the processing–morphology–dielectric performance relationships of BOPP nanocomposites provides critical perspectives on the future prospects and challenges of polymer nanocomposites for high voltage metallized film capacitors.

Gli stili APA, Harvard, Vancouver, ISO e altri

22

Li Hua, 李化, 陈耀红 Chen Yaohong, 林福昌 Lin Fuchang e 彭波 Peng Bo. "Lifetime characteristics of metallized film pulsed capacitors". High Power Laser and Particle Beams 22, n. 4 (2010): 773–76. http://dx.doi.org/10.3788/hplpb20102204.0773.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

23

Joubert, Ch, A. Béroual e G. Rojat. "Asymmetrical current distribution in metallized film capacitors". Journal of Applied Physics 95, n. 11 (giugno 2004): 6420–25. http://dx.doi.org/10.1063/1.1712009.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

24

Ostrowski, Jörg, Ralf Hiptmair e Henning Fuhrmann. "Electric 3D‐simulation of metallized film capacitors". COMPEL - The international journal for computation and mathematics in electrical and electronic engineering 26, n. 2 (10 aprile 2007): 524–43. http://dx.doi.org/10.1108/03321640710727836.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

25

Belko, Victor, Ivan Ivanov, Andrey Plotnikov e Valery Belanov. "Energy characteristics of self-healing process in metallized film capacitors". E3S Web of Conferences 140 (2019): 02006. http://dx.doi.org/10.1051/e3sconf/201914002006.

Testo completo

Abstract (sommario):

Metallized film capacitors widely used in energy applications were studied. The experimental method for investigation of energy and dynamic characteristics of self-healing processes in real metal-film capacitors was developed. The commercial PET and PP MFCs of 0.22 – 1 μF capacitance and 63–250 V voltage were tested. Depending on applied voltage, 3 types of SH processes in MFC were discovered: single, repetitive, and multiple SH. Dependencies of self-healing energy on breakdown voltage were obtained. These dependencies are described by power law with the exponent n = 2.2–2.4 that significantly differs from literature data. The obtained data will be used for degradation and aging laws formulation for capacitors’ energy storage capability improvement.

Gli stili APA, Harvard, Vancouver, ISO e altri

26

Silvus, Stan, e Kenneth Cook. "Useful Technique for Analysis of Fluid-Filled Capacitors". EDFA Technical Articles 9, n. 2 (1 maggio 2007): 6–12. http://dx.doi.org/10.31399/asm.edfa.2007-2.p006.

Testo completo

Abstract (sommario):

Abstract Fluid-filled metallized-polymer-film capacitors have unique failure mechanisms, many of which are related to insufficient fluid level, improper installation geometry, or both. Although such failures can be analyzed using X-ray testing equipment, it is often impractical or cost-prohibitive. This article describes some of the failure modes observed in fluid-filled capacitors and explains how to analyze them easily and inexpensively.

Gli stili APA, Harvard, Vancouver, ISO e altri

27

Kong, M. G., e Y. P. Lee. "Electrically induced heat dissipation in metallized film capacitors". IEEE Transactions on Dielectrics and Electrical Insulation 11, n. 6 (dicembre 2004): 1007–13. http://dx.doi.org/10.1109/tdei.2004.1387824.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

28

Tortai, J. H., A. Denat e N. Bonifaci. "Self-healing of capacitors with metallized film technology:". Journal of Electrostatics 53, n. 2 (agosto 2001): 159–69. http://dx.doi.org/10.1016/s0304-3886(01)00138-3.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

29

Godec, M., Dj Mandrino e M. Gaberšček. "Investigation of performance degradation in metallized film capacitors". Applied Surface Science 273 (maggio 2013): 465–71. http://dx.doi.org/10.1016/j.apsusc.2013.02.063.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

30

Kim, Namhun, Changju Park, Sangshin Kwak e Jeihoon Baek. "Experimental Comparisons and Evaluations of Different Types of DC-link Capacitors for VSI-Based Electric Compressors in Battery Electric Vehicle Systems". Electronics 9, n. 8 (8 agosto 2020): 1276. http://dx.doi.org/10.3390/electronics9081276.

Testo completo

Abstract (sommario):

Electric compressor systems for air conditioning operations are an essential part in battery electric vehicle systems, which are not applicable to conventional belt-driven compressors due to no combustion engines. Three-phase voltage source inverters (VSI) and interior permanent magnet (IPM) motors are generally used for electric compressor systems in battery electric vehicles. Direct current (DC)-link capacitors are a critical component in the power converter systems, which affect the cost, size, performances and scale. Metallized polypropylene film capacitors are considered more reliable than conventional electrolytic capacitors for high temperature environments such as electric vehicle applications. This paper presents comprehensive comparisons and evaluations of electric compressors with two types of DC-link capacitors. Based on a 5 kW IPM motor drives and a VSI with a nominal DC voltage of 360 V for electric compressors, performances with electrolytic and film capacitors have been evaluated by experimental tests.

Gli stili APA, Harvard, Vancouver, ISO e altri

31

Kong, Zhong Hua, Li Gang Wu, Chun Ya Tong e Zai Fei Luo. "Calculation of Self-Healing Contract Resistance of Metallized Film". Applied Mechanics and Materials 615 (agosto 2014): 236–39. http://dx.doi.org/10.4028/www.scientific.net/amm.615.236.

Testo completo

Abstract (sommario):

Abstract. Self-healing is an interesting property of metallized capacitors. contract resistance is importance to self healing. In the paper contract resistance is calculated with different diameters of hole and different thickness of metal layer. The larger is radius of hole, the less is contract resistance. The thicker is metal layer, the less is contract resistance.

Gli stili APA, Harvard, Vancouver, ISO e altri

32

Picci, G., e M. Rabuffi. "Pulse handling capability of energy storage metallized film capacitors". IEEE Transactions on Plasma Science 28, n. 5 (2000): 1603–6. http://dx.doi.org/10.1109/27.901241.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

33

Belko, Victor, Dmitry Glivenko, Oleg Emelyanov, Ivan Ivanov e Andrey Plotnikov. "Current Pulse Polarity Effect on Metallized Film Capacitors Failure". IEEE Transactions on Plasma Science 45, n. 6 (giugno 2017): 1020–25. http://dx.doi.org/10.1109/tps.2017.2703947.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

34

Li, Zhiwei, Hua Li, Fuchang Lin, Yaohong Chen, De Liu, Bowen Wang, Haoyuan Li e Qin Zhang. "Lifetime investigation and prediction of metallized polypropylene film capacitors". Microelectronics Reliability 53, n. 12 (dicembre 2013): 1962–67. http://dx.doi.org/10.1016/j.microrel.2013.06.005.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

35

Na, J. G. "New method to predict corrosion characteristics of Zn‐metallized thin films for film capacitors". Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 13, n. 6 (novembre 1995): 2739–41. http://dx.doi.org/10.1116/1.579697.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

36

Xiao, Meng, Mengdie Zhang, Haoliang Liu, Boxue Du e Yawei Qin. "Dielectric Property and Breakdown Strength Performance of Long-Chain Branched Polypropylene for Metallized Film Capacitors". Materials 15, n. 9 (23 aprile 2022): 3071. http://dx.doi.org/10.3390/ma15093071.

Testo completo

Abstract (sommario):

At high temperatures, the insulation performance of polypropylene (PP) decreases, making it challenging to meet the application requirements of metallized film capacitors. In this paper, the dielectric performance of PP is improved by long-chain branching modification and adding different kinds of nucleating agents. The added nucleating agents are organic phosphate nucleating agent (NA-21), sorbitol nucleating agent (DMDBS), rare earth nucleating agent (WBG-Ⅱ) and acylamino nucleating agent (TMB-5). The results show that the long-chain branches promote heterogeneous nucleation and inhibit the motion of molecular chains, thereby enhancing the dielectric properties at high temperatures. Nucleating agents modulate the crystalline morphology of long-chain branched polypropylene (LCBPP), which leads to a decrease in the mean free path of carriers and an increase in trap energy level and trap density. Therefore, the conductivity is reduced and the breakdown strength is improved. Among the added nucleating agents, NA-21 showed a significant improvement in the electrical properties of LCBPP films. At 125 °C, compared with PP, the breakdown strength of the modified film is increased by 26.3%, and the energy density is increased by 66.1%. This method provides a reference for improving the dielectric properties of PP.

Gli stili APA, Harvard, Vancouver, ISO e altri

37

Wang Wenjuan, 王文娟, 李化 Li Hua, 李智威 Li Zhiwei, 童勇 Tong Yong e 林福昌 Lin Fuchang. "Lifetime improvement of metallized film capacitors by inner pressure strengthening". High Power Laser and Particle Beams 26, n. 4 (2014): 45015. http://dx.doi.org/10.3788/hplpb20142604.45015.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

38

Belko, Victor O., Oleg A. Emelyanov, Ivan O. Ivanov, Andrey P. Plotnikov e Efrem G. Feklistov. "Application of Numerical Simulation for Metallized Film Capacitors Electrodes Design". IEEE Access 9 (2021): 80945–52. http://dx.doi.org/10.1109/access.2021.3085695.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

39

Belko, V. O., D. Y. Glivenko, O. A. Emelyanov e I. O. Ivanov. "INVESTIGATION OF DEGRADATION IN ELECTRODE CONTACTS OF METALLIZED FILM CAPACITORS". St. Petersburg State Polytechnical University Journal 254, n. 4 (febbraio 2017): 69–76. http://dx.doi.org/10.5862/jest.254.8.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

40

Li, Hua, Wenjuan Wang, Zhiwei Li, Haoyuan Li, Bowen Wang, Fuchang Lin e Zhijian Xu. "Polarization characteristics of metallized polypropylene film capacitors at different temperatures". IEEE Transactions on Dielectrics and Electrical Insulation 22, n. 2 (aprile 2015): 682–88. http://dx.doi.org/10.1109/tdei.2015.7076763.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

41

Zhao, Jianyin, e Fang Liu. "Reliability assessment of the metallized film capacitors from degradation data". Microelectronics Reliability 47, n. 2-3 (febbraio 2007): 434–36. http://dx.doi.org/10.1016/j.microrel.2006.05.013.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

42

McCluskey, F. P., N. M. Li e E. Mengotti. "Eliminating infant mortality in metallized film capacitors by defect detection". Microelectronics Reliability 54, n. 9-10 (settembre 2014): 1818–22. http://dx.doi.org/10.1016/j.microrel.2014.07.090.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

43

Makdessi, M., A. Sari e P. Venet. "Metallized polymer film capacitors ageing law based on capacitance degradation". Microelectronics Reliability 54, n. 9-10 (settembre 2014): 1823–27. http://dx.doi.org/10.1016/j.microrel.2014.07.103.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

44

Valentine, Nathan, Michael H. Azarian e Michael Pecht. "Metallized film capacitors used for EMI filtering: A reliability review". Microelectronics Reliability 92 (gennaio 2019): 123–35. http://dx.doi.org/10.1016/j.microrel.2018.11.003.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

45

El-Husseini, M. H., P. Venet, G. Rojat e C. Joubert. "Thermal simulation for geometric optimization of metallized polypropylene film capacitors". IEEE Transactions on Industry Applications 38, n. 3 (maggio 2002): 713–18. http://dx.doi.org/10.1109/tia.2002.1003421.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

46

Li, Zhiwei, Hua Li, Fuchang Lin, Yaohong Chen, De Liu, Bowen Wang, Qin Zhang e Wei He. "Lifetime Prediction of Metallized Film Capacitors Based on Capacitance Loss". IEEE Transactions on Plasma Science 41, n. 5 (maggio 2013): 1313–18. http://dx.doi.org/10.1109/tps.2013.2243476.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

47

Li, Zhiwei, Hua Li, Fuchang Lin, De Liu, Bowen Wang, Ling Dai, Haoyuan Li, Qin Zhang e Yaohong Chen. "Lifetime Improvement of Metallized Film Capacitors by Inner Pressure Strengthening". IEEE Transactions on Plasma Science 41, n. 10 (ottobre 2013): 3063–68. http://dx.doi.org/10.1109/tps.2013.2279140.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

48

Li, Zhiwei, Hua Li, Xiang Huang, Haoyuan Li, Wenjuan Wang, Bowen Wang, Fuchang Lin e Qin Zhang. "Temperature Rise of Metallized Film Capacitors in Repetitive Pulse Applications". IEEE Transactions on Plasma Science 43, n. 6 (giugno 2015): 2038–45. http://dx.doi.org/10.1109/tps.2015.2429144.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

49

Greenbank, William, e Thomas Ebel. "Layer-by-layer printable nano-scale polypropylene for precise control of nanocomposite capacitor dielectric morphologies in metallised film capacitors". Power Electronic Devices and Components 4 (marzo 2023): 100025. http://dx.doi.org/10.1016/j.pedc.2022.100025.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

50

Li Hua, 李化, 李智威 Li Zhiwei, 王国帅 Wang Guoshuai, 林福昌 Lin Fuchang, 刘德 Liu De, 王博闻 Wang Bowen, 李浩原 Li Haoyuan e 张钦 Zhang Qin. "Lifetime prediction of metallized polypropylene film capacitors in pulsed power applications". High Power Laser and Particle Beams 26, n. 4 (2014): 45016. http://dx.doi.org/10.3788/hplpb20142604.45016.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!