Tesi sul tema "Medical model"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 saggi (tesi di laurea o di dottorato) per l'attività di ricerca sul tema "Medical model".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi le tesi di molte aree scientifiche e compila una bibliografia corretta.
Merck, Derek Pizer Stephen M. "Model guided rendering for medical images". Chapel Hill, N.C. : University of North Carolina at Chapel Hill, 2009. http://dc.lib.unc.edu/u?/etd,2964.
Testo completoTitle from electronic title page (viewed Jun. 23, 2010). "... in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Computer Science." Discipline: Computer Science; Department/School: Computer Science.
Ye, Luming. "Perception Metrics in Medical Imaging". Thesis, KTH, Medicinsk teknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-102186.
Testo completoBouma, Matthew F. "Medical evacuation and treatment capabilities optimization model". Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2005. http://library.nps.navy.mil/uhtbin/hyperion/05Sep%5FBouma.pdf.
Testo completoThesis Advisor(s): Moshe Kress, Matt Boensel. Includes bibliographical references (p. 95-99). Also available online.
Kapur, Tina. "Model based three dimensional medical image segmentation". Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/80007.
Testo completoEllis, Michael, Joseph Nelson, Jeffrey Kartchner, Karl Yousef, William Adamas-Rappaport e Richard Amini. "Cadaver-based abscess model for medical training". DOVE MEDICAL PRESS LTD, 2017. http://hdl.handle.net/10150/623112.
Testo completoKunzler, Jayson S. (Jayson Scott) 1973. "Order fulfillment model for medical equipment installation materials". Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/89316.
Testo completoIncludes bibliographical references.
by Jayson S. Kunzler.
S.M.
Khalaf, Abdelbaset Abdelrahem. "Evidence based mathematical maintenance model for medical equipement". Versailles-St Quentin en Yvelines, 2012. http://www.theses.fr/2012VERS0036.
Testo completoAlthough medical equipment maintenance has been well planned and executed for more than 30 years, very few studies have been conducted to measure and evaluate its effectiveness in terms of reliability and availability for service delivery. The ongoing unresolved debate in clinical engineering is whether preventive maintenance (PM) is actually necessary and, if so, how often and which tasks need to be performed. A mathematical maintenance modelling approach is used to analyse the survival probability of various medical equipment. This approach allows exploring the impact of PM, CM and combined PM/CM on the availability of equipment and will contribute to the intensified debate regarding PM. Maintenance strategies is analysed and a new failure-cost model was developed, which allows adopting appropriate PM intervals for various types of medical equipment. The analytical model to calculate the number of failures and costs associated with PM and CM is a significant contribution. The optimisation problem related to preventive maintenance scheduling using a Mixed-Integer Mathematical Programming solver was solved and compared to a proposed Greedy Algorithm. Simulation results based on the survival model show that the Greedy Algorithm gives the same solution in terms of schedule plan as the mixed integer approach
Pathmathasan, Cynthia. "DISABILITY IN MEDICAL EDUCATION & TRAINING: A DISABILITY-FOCUSED MEDICAL CURRICULUM". NEOMED College of Graduate Studies / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=ne2gs1622810204171811.
Testo completoSandham, John Dafydd. "Achieving a model for improving medical devices management policy". Thesis, Middlesex University, 2014. http://eprints.mdx.ac.uk/19157/.
Testo completoBall, Kerry Louise. "Exploring professionalism in medical educators : from model to tool". Thesis, University of Winchester, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.503839.
Testo completoRay, Christopher. "Pediatrician Perceptions of the Patient-Centered Medical Home Model". VCU Scholars Compass, 2011. http://scholarscompass.vcu.edu/etd/211.
Testo completoNikkarinen, Tuuli. "Evaluation model for continuing medical education : a case study". Helsinki : University of Helsinki, 2002. http://ethesis.helsinki.fi/julkaisut/laa/kansa/vk/nikkarinen/.
Testo completoDalmeyer, Johannes Paulus Franciscus. "A business model for medical subspecialty training in South Africa". Thesis, Nelson Mandela Metropolitan University, 2015. http://hdl.handle.net/10948/3508.
Testo completoZhang, Jie. "A local likelihood active contour model of medical image segmentation". Ohio : Ohio University, 2007. http://www.ohiolink.edu/etd/view.cgi?ohiou1187087285.
Testo completoJedryszek, Jakub. "A model-driven development and verification approach for medical devices". Thesis, Kansas State University, 2014. http://hdl.handle.net/2097/18222.
Testo completoDepartment of Computing and Information Sciences
John Hatcliff
Medical devices are safety-critical systems whose failure may put human life in danger. They are becoming more advanced and thus more complex. This leads to bigger and more complicated code-bases that are hard to maintain and verify. Model-driven development provides high-level and abstract description of the system in the form of models that omit details, which are not relevant during the design phase. This allows for certain types of verification and hazard analysis to be performed on the models. These models can then be translated into code. However, errors that do not exist in the models may be introduced during the implementation phase. Automated translation from verified models to code may prevent to some extent. This thesis proposes approach for model-driven development and verification of medical devices. Models are created in AADL (Architecture Analysis & Design Language), a language for software and hardware architecture modeling. AADL models are translated to SPARK Ada, contract-based programming language, which is suitable for software verification. Generated code base is further extended by developers to implement internals of specific devices. Created programs can be verified using SPARK tools. A PCA (Patient Controlled Analgesia) pump medical device is used to illustrate the primary artifacts and process steps. The foundation for this work is "Integrated Clinical Environment Patient-Controlled Analgesia Infusion Pump System Requirements" document and AADL Models created by Brian Larson. In addition to proposed model-driven development approach, a PCA pump prototype was created using the BeagleBoard-xM device as a platform. Some components of PCA pump prototype were verified by SPARK tools and Bakar Kiasan.
Zhang, Jie. "A Local Likelihood Active Contour Model for Medical Image Segmentation". Ohio University / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1187087285.
Testo completoKemp, Andeneshea Shacardia. "A Contingency Model of Team Leadership for Emergency Medical Teams". Scholar Commons, 2014. https://scholarcommons.usf.edu/etd/5523.
Testo completoFafílková, Sára. "Marketingová strategie pro firmu Unique Medical, s.r.o". Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2015. http://www.nusl.cz/ntk/nusl-224838.
Testo completoSchultz, Sebastian. "Studies on Islet Amyloid Polypeptide Aggregation : From Model Organism to Molecular Mechanisms". Doctoral thesis, Linköpings universitet, Cellbiologi, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-70094.
Testo completoBischoff, Stephan Michael. "Hybrid geometry representations with applications in medical imaging and model repair". Aachen : Shaker, 2007. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=017091822&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Testo completoVouitsis, Elpida. "Camille Pissarro's Turpitudes sociales : challenging the medical model of social deviance". Thesis, McGill University, 2005. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=98591.
Testo completoAlshehri, Abdullah S., e Hyrum T. Brossard. "RETENTION ELASTICITY AND PROJECTION MODEL FOR U.S. NAVY MEDICAL CORPS OFFICERS". Monterey, California. Naval Postgraduate School, 2013. http://hdl.handle.net/10945/32787.
Testo completoRetaining skilled doctors in the Navy's Medical Corps has become increasingly difficult due to the Global War on Terrorism (GWOT) and lucrative positions outside the military. This thesis estimates probit models to evaluate the effect that the civilian-military pay gap has on the overall Medical Corps retention rate across 19 specialties using data gathered from Bureau of Medicine and Surgery and Medical Group Management Association for Fiscal Year (FY) 2002 to FY2011. In particular, this study measures the overall retention elasticity and elasticity estimates for three main specialty groups (primary care, surgical specialties, and other specialties) and 19 individual specialties. Furthermore, projection models are employed to predict the Medical Corps future retention rates. Finally, this study seeks to understand if the protracted GWOT has an effect on the retention behavior of the Navys Medical Corps. The results indicate that a 1% increase in the pay gap reduces the overall retention probability by 0.24%. The surgical group shows the highest retention elasticity (0.31), while the other specialties group exhibits the least responsiveness (0.19). The projection models estimate that the aggregate retention probability for FY2012 will be one percentage point lower than the actual retention rate of FY2011 (58%). Finally, the prolonged GWOT has reduced the overall retention rate by 14.1 percentage points.
Trezise, Melissa. "SimITK: Model Driven Engineering for Medical Imaging". Thesis, 2013. http://hdl.handle.net/1974/8148.
Testo completoThesis (Master, Computing) -- Queen's University, 2013-08-05 10:15:16.607
Qian, Zhen. "Model-based image segmentation in medical applications". 2007. http://hdl.rutgers.edu/1782.2/rucore10001600001.ETD.16760.
Testo completoWalker, Christopher. "Venezuela's Medical Revolution: Can the Cuban Medical Model be Applied in Other Countries?" Thesis, 2013. http://hdl.handle.net/10222/40667.
Testo completoJong, Jia Shyan, e 鍾佳賢. "Analysis Regression Model to Group Medical Expense Insurace". Thesis, 1995. http://ndltd.ncl.edu.tw/handle/90535928385947931164.
Testo completoKhalaf, Abdelbaset Abdelrahem. "Evidence-based mathematical maintenance model for medical equipment". 2012. http://encore.tut.ac.za/iii/cpro/DigitalItemViewPage.external?sp=1000597.
Testo completoAims to develop a mathematical maintenance model for medical equipment for the purpose of analysing maintenance strategies to optimise maintenance of medical equipment.
Lin, Cheng-Hsien, e 林正賢. "Model Based Motion Estimation in Medical Image Sequences". Thesis, 2009. http://ndltd.ncl.edu.tw/handle/45879466193042824685.
Testo completo國立成功大學
資訊工程學系碩博士班
97
Motion analysis is very useful for recognizing target patterns from a sequence of images. Applications in motion estimation and target tracking become especially important in medical and biomedical researches nowadays. However, traditional methods which are optimal for rigid body motion are not suitable for medical analysis due to the object deformation and noise problems. In this study, we tried to propose adequate motion estimation methods for several medical motion applications which include motion field estimation from ultrasound images, tag line tracking from tagged magnetic resonance (MR) images, and live cell tracking from microscopic images. Generally, the usual problems in medical motion analysis include: speckle noises and temporal de-correlation of the speckle patterns in ultrasound images; large motion and tag decaying problems in tagged MR images; and low contrast in pseudopods and topological changes in cellular microscopic images. To overcome these problems, it is necessary to integrate a priori knowledge based on the physical properties into the motion estimation process. In this study, we first designed a hierarchical maximum a posteriori estimator together with an ultrasonic feature model for ultrasound image sequences. A motion compounding method is also proposed to reduce speckle noises and to enhance image quality based on the proposed motion estimation method. To cope with the problems of large motion and tag decaying, we proposed to incorporate a cardiac motion model based prediction scheme and a candidate pre-screening technique together with the deformable models to track the tag lines. To segment and track highly deformable cells, we have presented an automatic method based on the framework of modified T-snakes coupled with the knowledge of cellular life model. The proposed motion estimation methods were compared with several existing methods via a series of experiments with both simulated and clinical image sequences. Experimental results showed that motion could be accurately assessed in different types of imaging modalities. The proposed systems can help to perform better quantification and analyses in clinical applications. It will certainly help medical doctors to achieve better observation and more accurate assessments, and thus result in better diagnostic quality.
Lima, Erica Esmeraldo Figueiredo. "Agile development model for certifiable medical device software". Master's thesis, 2020. https://hdl.handle.net/10216/129850.
Testo completoThis study aims to illustrate how is the current state when the subject is medical device software using agile. Introduces the needs of the regulations and the standards to be a certifiable medical device software and how this is the safer and quality way to do it. The problem that many companies feel obligated to use the waterfall still when it is a project too complex or have many regulations as the only way to build software. The medical area is not different; it is challenging to put agile and still comply with all regulations and standards. This paper will illustrate some works that other papers have already done using agile and try to find the best way to proceed by validation, through one academic case and interviews and finally contribute with a final proposed process. Keywords: Agile development, Agile methodologies, Medical device, Scrum, Process, Regulation, Software life cycle processes, Risk Management, Software Process Improvement (SPI), FDA, Medical device industry.
Lima, Erica Esmeraldo Figueiredo. "Agile development model for certifiable medical device software". Dissertação, 2020. https://hdl.handle.net/10216/129850.
Testo completoThis study aims to illustrate how is the current state when the subject is medical device software using agile. Introduces the needs of the regulations and the standards to be a certifiable medical device software and how this is the safer and quality way to do it. The problem that many companies feel obligated to use the waterfall still when it is a project too complex or have many regulations as the only way to build software. The medical area is not different; it is challenging to put agile and still comply with all regulations and standards. This paper will illustrate some works that other papers have already done using agile and try to find the best way to proceed by validation, through one academic case and interviews and finally contribute with a final proposed process. Keywords: Agile development, Agile methodologies, Medical device, Scrum, Process, Regulation, Software life cycle processes, Risk Management, Software Process Improvement (SPI), FDA, Medical device industry.
Chen, Hui-Rong, e 陳慧蓉. "Study on Service-Oriented Medical Business Management Model". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/86618093107545419078.
Testo completo國立中山大學
資訊管理學系研究所
98
Management guru Peter Drucker once claims that the management philosophy is to achieve a comprehensive system for the effective management of enterprise principles, procedures, and practices.Being exposed to intense competitions, financial risks, and internal requirements, without a standard to follow health care industry shall not be able to advantageously record various types of documents, causing the complicated paperwork. Also if there are blurred responsibilities among the various departments, less medical and process efficiency, health care industry shall not be lead to the direction towards sustainability. This research adopts structure-behavior coalescence (SBC) as the core service-oriented modeling method to examine patients, physicians, and resources generated by the relationship among them. We use “service” as the basic construction unit, combining with enterprise architecture and information technology, to build a service-oriented medical business management model (SOMBMM). The results of this research are the following: 1. Modeling step is top-down, at different levels to describe its related services, also echo the corporate bottom-up strategy; 2. Enhance business owner for medical business understanding, enhance manager for business planning and organizational restructuring of the effectiveness and efficiency; 3. When it comes the enterprise strategy revision, structural changes or behavioral updates, service-oriented plays as the best tool; 4. Each service clearly shows all its operations, human resources and manpower, and then fully under control; 5. Service, operation names and input and output data are well delineated after the information system’s analysis, this shall reduce the effort to communicate with users; 6. Using icons that make managers easy to understand, reducing the cost of education. The contribution of this research is to provide business managers a modern management model and to enhance management capacity, no longer need the experience, quickly getting familiarity with the business to improve administrative efficiency.
Liu, Chun-Liang, e 劉峻良. "Study on Service-Oriented Medical Quality Management Model". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/66482687093200230719.
Testo completo國立中山大學
資訊管理學系研究所
98
After the implementation of national health insurance, the health care industry has entered into a new era. The public not only ask the hospital for medical technology and expertise, but also more focus on the quality of care. The quality of health care has become a successful key factor for hospital management. The biggest problem of quality management faced by a hospital is that no one can clearly describe the organizational structure, business process, and information system which are related with the medical quality management. Provided that no one could completely describe the quality management system, neither a tool to represent and analyze the quality management system, it is impossible to achieve a nice and sound quality management throughout the hospital. This research uses a quality management model as an example, introducing service-oriented medical quality management model (SOMQMM) to corporate restructuring and process improvements. Service-oriented management model, using the service-oriented theory and method, is able to effectively describe the organizational structure, business process, and information system all in one. ontribution of this research is through the structure-behavior coalescence (SBC) service-oriented theory and method to create a new management tool and quality management model. From this model, we can clearly describe how we can do better quality of care for the medical industry, and integrate the quality management to the organizational structure and business process. Hence, provide the dynamic quality of information system to the manager as the basis for adjustment and management.
Yen, Tzu-Jie, e 顏子傑. "Innovative Business Model in Medical Cosmetology Entrepreneurship: A Case Study of a Medical Device". Thesis, 2019. http://ndltd.ncl.edu.tw/handle/332b6p.
Testo completo國立臺灣大學
商學研究所
107
In the recent years, entrepreneurship has been prevailing in Taiwan. However, according to the statistical data, even if the start-up companies can survive through the beginning of the venture, only 1% of them have lasted for more than 5 years. Therefore, how a start-up company can develop a successful business model to steadily grow and make profits becomes a new challenge, which is also the starting point of this study. This thesis applies the method of case study based on an entrepreneurial case of medical device. Through the semi-structured interview, researcher strives to understand the entrepreneurial ideas, future scheming, and the business model development. Since to start a new business is a dynamic process, by taking advantage of qualitative analysis and narrative analysis, researcher can analyze various components of the business model and explore potential resources in the future. Based on the case in this study, we concluded the “Three Important factors” for managers and entrepreneurs in the medical industry, namely, personal characteristics and entrepreneurial experiences of the entrepreneurs, connection with the key stakeholders in the industry value chain, and finding the starting point for the products. To sum, by applying Business Model Canvas, NABC Method and POCD entrepreneurial management model, this thesis explains how the business model was developed and the entrepreneurial activities were systematically organized in the focal case. The findings provide future entrepreneurs an example of “the Best Practices”, and contributes to the literature on the sustainability of new venture.
Lin, Fay-June, e 林芳如. "A study of Taiwan Customer index Model- Chinese Medical Clinic A study of Taiwan Customer index Model- Chinese Medical Clinic industry". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/11648723153024119102.
Testo completo嶺東科技大學
經營管理研究所
98
ABSTRACT Chinese Medical Clinics have been recently improving their service qualities by upgrading service quantities. In order to satisfy every patient's needs under the intensive competition resulted from the change of demography and the aging of the whole population. The purpose of research is to demonstrate the level of customer satisfaction based on Taiwan Customer Satisfaction Index(TCSI) regarding to the services provided in two Chinese medical clinics located in Taichung City. The Partial Least Squares(PLS) is applied to estimate TCSI the score of all related variables scores. And the result of 285 effective surveys, with 81.4% collection rate, were .from two Chinese Medical Clinics in Taichung, the statistic is calculated by PLS and the results of clinic's reputation, service quality, patient's expectation, and perspective match with TCSI ( ) in 70.8%. This research points out that patient's expectation doesn't have positive relationship effect with customer's satisfaction and perspective but other hypotheses are proved as TCSI model. Through Important- performance Analysis(IPA), the advantages of Chinese Medical Clinic to keep the great quantity are to be patient, professional and experienced. So the only way to keep a long term business is to increase customer satisfaction.
Kirschner, Matthias. "The Probabilistic Active Shape Model: From Model Construction to Flexible Medical Image Segmentation". Phd thesis, 2013. https://tuprints.ulb.tu-darmstadt.de/3519/1/thesis.pdf.
Testo completoHung, shuching, e 洪淑菁. "Using Kano Model to Explore The Medical Service Quality -A Case of Chinese Medical Clinic". Thesis, 2013. http://ndltd.ncl.edu.tw/handle/qaa5gz.
Testo completo大葉大學
管理學院碩士在職專班
101
Since the implementation of the National Health Insurance in 1995, the general public has demanded a higher standard on medical care, thus health care facilities have been committed to enhancing the quality of medical service in order to improve operational performance. With the fierce competition among Chinese medical clinics and the limitation of cost control posed by the Global Budgeting of National Health Insurance, the impact on managing clinics have been tremendous. The aim of this study is to explore Chinese medical clinic’s service quality attributes, which classifies the service qualities into must-be quality, one-dimensional quality, indifferent quality, attraction quality and reverse quality, using Kano’s Two-Dimension Model. Whether different demographic variables attribute to how service qualities are classified with significant difference is also investigated. Then the data is analyzed according to quality improvement indicators to find the areas that Chinese medicine clinics can improve to enhance patients’ satisfactions and decrease their dissatisfactions. The results show that among 28 important medical service quality items, three are classified as attraction qualities, four as one-dimensional qualities, eight as must-be qualities, thirteen as indifferent qualities and no reverse quality is found. Moreover, different demographic variables also perceive Chinese medical clinics’ service quality attributes differently.
Li, Shuo. "Medical image analysis and visualization using geometric deformable model". Thesis, 2006. http://spectrum.library.concordia.ca/8860/1/NR34792.pdf.
Testo completoLee, Jonathan, e 李俊賢. "A Study on Usability Evaluation Model for Medical Devices". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/95781996682529393940.
Testo completo國立清華大學
工業工程與工程管理學系碩士在職專班
103
Abstract With advances in medical devices and technology, adverse events caused by use errors have become an increasing cause for concern. Many of the medical devices developed without applying a usability evaluation are non-intuitive, difficult to learn and to use. As healthcare evolves, less skilled users including patients themselves are now using medical devices and medical devices are becoming more complicated. In simpler times, the user of a medical device might be able to cope with an ambiguous, difficult-to-use user interface. The design of a usable medical device is a challenging endeavor. Therefore, in this study we focus from a perspective of human factors and risk management in medical device use, and also consider regulatory requirements for medical devices, to establish a systematic model of medical device usability evaluation. Medical device manufacturers can integrate this model into product design and development process, to reduce future risks associated with device use, and to improve the usability of products. Finally, the research utilizes home-use blood glucose meters as an empirical study to verify the validity of the model. The usability testing was performed, and we aggregated the results into blood sugar machine interface design principles. We hoped that this study may provide a reference for future study on medical device usability evaluation. Keywords: Medical Device, Blood Glucose Meter, Risk Management, Usability Engineering, Usability Testing.
Lin, Chi-Min, e 林啟民. "Admission prediction model in the adult medical emergency patients". Thesis, 2012. http://ndltd.ncl.edu.tw/handle/12115243252860856715.
Testo completo輔仁大學
統計資訊學系應用統計碩士班
100
Object: Overcrowding at the emergency department continues to be an important issue. Early prediction of hospital admission may reduce waiting time and also provide the valuable information to the clinical doctor. The purpose of the study is to develop a model predicting patient’s final outcome of the adult medical emergency department at the time of ED triage, using routine hospital administrative data. Method: This is a retrospective study, using the data collected by the nursing at the time of triage from Jan. 2011 to Dec. 2011. The variable includes age, sex, past history, chief complaint, biological profile (such as blood pressure, pulse rate, etc.), and the final outcome. Chi-square tests are used to study the association between nominal or ordinal data, and the student T test analyzes continuous data. CART (Classification and Regression Tree) is applied to develop the prediction model. Result: Of 36287 patients, 5602 patients (15.4%) were admitted for further treatment. Variables like Age, respiratory rate, respiratory pattern, oxygen saturation, body temperature, conscious level, diastolic blood pressure , and chief complaint of blood in stool are included in our predictive model. The sensitivity of the model is 36.0% and the specificity is 95.7%. The c-statists of ROC curve is 73.516%. Conclusion: By CART prediction model, we can identify the high-risk groups of admission, providing useful information to clinicians.
SIAO, KAI-REN, e 蕭凱仁. "The heating model analysis of medical food supply cars". Thesis, 2012. http://ndltd.ncl.edu.tw/handle/52029933296357814265.
Testo completo國立雲林科技大學
機械工程系碩士班
100
Presently the medical food cars is imported product and price is not low who used by the major hospital and nursing center and other medical institution. We have to provide new options of equipments and heating ingredients, because foreign dietary content and heating conditions are not identical to people eating habits. We carry to design analysis and manufacture produce to be directed requires. The prototype car can heat food and keep food fresh and temperature by heat conduction who can steam, bake and keep food warm. This research make theoretical analysis and experiment for heating effect of medical food cars. Hope carried the way of medical food cars out to send meals by compared the result of this study with foreign and provide advice for second-generation further. In theories model-analyzing use Fluent software to simulate. The results of simulation will be compared with the medical food cars experiment data to confirm the accuracy and rationality of the analysis of the theories mode. The results obtained from the numerical simulations and experiments appeared to be reasonable. Although it shows that the predicted temperatures and heating time are slight different from experiment data, the whole variety trend still contain good estimate result.
林欣慧. "A risk asssessment model for contact lenses medical equiment". Thesis, 2013. http://ndltd.ncl.edu.tw/handle/47028303908227649790.
Testo completo逢甲大學
工業工程與系統管理學系
101
With increasing success of international brands of contact lenses from vigorous marketing and advertisements of it products it is not surprising contact lenses have gradually been accepted by the general public as a mainstream product in many people&;#39;s lives. According to Article 13 Pharmaceutical Affairs Law, contact lenses in summary may affect the human body health, therefore, have been identified as medical equipment. Medical device therapy equipments include diagnosis, treatment, mitigation or prevention of human diseases, except for the wide range of medical equipments are difficult to set management practices. Therefore, It has become the trend of global management to assure the safety and performance of the product by using risk assessment management methods to implement medical equipment. According to the statutory level, in this study, the risk management system for medical devices to further understand and discuss the operation of risk management operations of the medical equipment. Through ISO 14971 process to set risk management standards and application of failure model effects analysis (FMEA) for contact lenses. Contact lenses firms should understand the level of risk before design, development and combine risk priority number (RPN) assessment to identify unacceptable risk items to improve products safety and efficacy.
CHEN, YOU-WEI, e 陳宥瑋. "The Resolution Model of Medical Dispute and Mediation System". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/52458415601488661639.
Testo completoSu, Tzu-Hsin, e 蘇子炘. "The Hierarchy Effects Model of Consumer Experiences for Medical Cosmetology". Thesis, 2006. http://ndltd.ncl.edu.tw/handle/47609957716973237956.
Testo completo國立中正大學
企業管理所
94
dical institutes were influenced by the constraint of government budget that resulted in a great change of financial structure on the medical care industry. Also, medical cosmetology had grown up very fast during these years. As a result, the medical institutes must offer better quality medical services at the moment to meet the keen competition. Because medical cosmetology is mostly consumer's initiative, the importance of medical processes must be particularly emphasized. The purposes of this research include:(1)to discuss experience contexts of medical cosmetology by consumers' view;(2)to discuss the relationships among consumer experiences, experiential value, experiential behavior;(3)to build hierarchy effects of medical cosmetology consumer experiences;(4)to use consumer experiences to segment medical cosmetology market;(5)to discuss the hierarchy effects of medical cosmetology consumer experiences between different medical cosmetology market. First, we interviewed 10 consumers with medical cosmetology experience in the first stage for qualitative study. We used grounded theory to analyze the contexts and process of consumer experiences. And then, we used purposed sampling to interview 1040 samples with medical cosmetology experience in the second stage for quantitative study and analyzing the hierarchy effects of consumer experiences. The results of grounded theory analysis showed that: there were 256 important examples after open coding; According to the relationships of each example, getting 62 sub-classifications and 19 classifications after axial coding; finally, choosing 4 core concepts after selective coding. The processes of consumer experiences for medical cosmetology were divided 4 stages: information demand stage, cosmetology experience stage, value cognition stage, behavior performance stage. The hierarchy effects of Consumer experiences showed that: "sense experience", "feel experience" and " act experience" had positive effects on affective value; "think experience" had positive effects on utilitarian value; " act experience" and " relate experience" had positive effects on symbolic value; utilitarian value, affective value and symbolic value all had positive effects on experiential behavior. Besides, we adopted consumer experiences to be segmentation variables. Market was divided into 5 clusters which are named be “traditional conservation”, “full experiences", “emotional tendency”, “rational prudent” and “fanatical tendency” respectively. Different cluster focused on different information. Central route information had more positive relationships with “think experience” and peripheral rout information had more positive relationships with “sense experience”, “feel experience” and “relate experience”. In academy, this research cleared the contexts and processes of consumer experiences for medical cosmetology, and the hierarchy model of consumer experience could explain the relationships among experience information, consumer experiences, experiential value and experiential behavior more completely. In addition, we developed a measurement scale for consumer experiences having well confidence and validity for future relative researches. In practice, this study can help medical institutions with medical cosmetology services understanding consumer’s whole feels and use appropriate marketing tools to enhance consumer experiences.
Wen-Hsiu, Wei, e 魏文秀. "A Model of Supply Chain Managemetn in Medical Device Industry". Thesis, 2001. http://ndltd.ncl.edu.tw/handle/98121878566227590390.
Testo completo國立臺北科技大學
生產系統工程與管理研究所
89
In the environment of Electronic Commerce (EC), there are more and more providers of products or services looking for available interactive partners of transaction through the burgeoned electronic media (such as the Internet), who then complete transaction with the use of information technology and the connection of communication networks. Therefore, how to effectively manage and use information flow becomes a key factor for successful supply chain management (SCM). As a result, the needs from enterprises for information service arise. After the initiation of National Health Insurance program, the competition among hospitals has been intensified. With the decreased reimbursement policy, hospitals were forced to control cost and promote effects of hospital to maximize profits. Establishing the partnership of medical device, SCM is a trend of medicates and medical device industry. This dissertation is based upon the 23 indices of Dickson’s research and indices of other research, and the opinions of experts in supplier selection in Taiwan. The research summarizes the new supplier selection criteria and develops the questionnaire. Experts in the previously mentioned industry were asked to fill the questionnaire. The investigation results were first analyzed by the Factors analysis to extract the critical criteria, and to build the criteria hierarchy. Then another questionnaire based on analytic hierarchy process (AHP) was developed and used to investigate the weights of the criteria in the above-mentioned industries. While considering the use of SCM, the most important supplier selection criteria is considered to be “Quality”, which includes four other main factors, “Service”, “Cost”, “Technical Capability” and “Delivery”. The findings of this study could be as a helpful reference for those who plan to conduct the Supply Chain Management in the future.
Wang, Hua. "Multi-level requirement model and its implementation for medical device". Thesis, 2018. https://doi.org/10.7912/C2JD42.
Testo completoRequirements determine the expectations for a new or modified product. Requirements engineering involves defining, documentation and maintenance of requirements. The rapid improving of technologies and changing of market needs require a shorter time to market and more diversified products. As an important and complex task in product development, it is a huge work to develop new requirements for each new product from scratch. The reusability of requirements data becomes more and more important. However, with the current “copy and paste” approach, engineers have to go through the entire set of requirements (sometimes even more than one set of requirements) to identify the ones which need to be reused or updated. It takes a lot of time and highly relies on the engineers’ experiences. Software tools can only make it easier to capture and locate the requirements, but won’t be able to solve the problem of effective reuse of the existing requirement data. The overall goal of this research is to develop a new model to improve the management of requirements and make the reuse and reconfiguration of existing requirements and requirement models more efficient. Considering the requirements data as an important part of the knowledge body of companies, we followed the knowledge categorization method to classify requirements into groups, which were called levels in the study, based on their changing frequency. There are four levels, the regulatory level, the product line level, the product level and the project level. The regulatory level is the most stable level. Requirements in this level were derived from government and industry regulations. The product line level contains the common requirements for a group of products, the product line. The third level, product level, refers to the specific requirements of the product. And the fourth and most dynamic level, the project level, is about the specific configurations of a product for a project. We chose auto-injector as the application to implement the model, since it is a relatively simple product, but its requirements cover many different categories. There are three major steps in our research approach for the project. The first is to develop requirements and classify them for our model. The development of requirements adopts the goal-oriented model to analyze and SysML, a system modeling language, to build requirements model. And the second step is to build requirements template, connecting the solution of the problem to the information system, standalone requirements management tool or information platform. This step is to find a way to realize the multi-level model in an information system. The final step is to implement the model. We chose two software tools for the implementation, Microsoft Office Excel, a commonly used tool for generating requirements documents, and Siemens PLM suite, Teamcenter, a world leading PLM platform with a requirement module. The results in the study include an auto-injector requirement set, a workflow for using the multi-level model, two requirements templates for implementation of the model in two different software tools, and two automatically generated requirement reports. Our model helps to define the changed part of requirements after analysis of the product change. It could avoid the pitfalls of the current way in reusing requirements. Based on the results from this study, we can draw the following conclusions. A practical multi-level requirements management model can be used for a medical device—the auto-injector; and the model can be implemented into different software tools to support reuse of existing requirement data in creating requirement models for new product development projects. Furthermore, the workflow and guideline to support the application and maintenance of the requirement model can be successful developed and implemented. Requirement documents/reports can be automatically generated through the software tool by following the workflow. And according to our assessment, the multi-level model can improve the reusability of requirements.
林君翰. "Statistical Model for Medical Expense: Based on Extreme Value Theory". Thesis, 2013. http://ndltd.ncl.edu.tw/handle/69kk4a.
Testo completo逢甲大學
統計學系統計與精算碩士班
101
This study proposes a loss model based on Extreme Value Theory for the outpatient expense costs in Taiwan Bureau of National Health Insurance. From the National Health Insurance Data from Year 2003 to 2009, a heavy-tail distribution occurs as the average outpatient costs exceed NT 12,000. Empirical results indicate that, the fitted model is consistent with the actual high outpatient costs. Comparing to the actual expense, the Generalized Pareto Distribution (GPD) model reflects the cost down outcome by the Taiwan government’s policy to control the high outpatient costs in 2010. By the proposed models, we discuss the costs in a private insurance contract entitled the payment options between full indemnity and predefined compensation. Accordingly, with the average medical cost of outpatient is approximately 2,000 to 3,000, it can be inferred that the cost of this payment option accounts for 30 to 50% of the average outpatient costs. Our proposed models and empirical results provide important suggestions and economic implications for the risk management of health insurance.
WU, YA-JIN, e 吳亞縉. "A Case Study of Business Model of Medical Device Industry". Thesis, 2017. http://ndltd.ncl.edu.tw/handle/2a6g65.
Testo completo國立雲林科技大學
企業管理系
105
With the advent of the aging society and the preventive medicine issues, drive the development of medical device industry. Many manufacturers have joined the ranks of the industry, and the government is also actively promoting the development of biotechnology industry, to promote the rapid growth of medical device industry. The research analyze the three listed company which are PISHANG, APEX and ROSSMAX. Analyze there business model and business strategy to understand the advantages and disadvantages of the manufacturers through their own strengths and weaknesses with the overall environment to create a unique profit model. PISHANG focus on its own brand development and after-sales service, in recent years is more into the field of electric vehicles to achieve synergies. APEX according to the international division strategy, develop its own brand and foundry production, and actively expand overseas access and research to enhance the competitive advantage. ROSSMAX in the way of vertical integration to reduce costs and control the quality, towards the brand’s layout and product line once the purchase of the strategy. The study found that the most of the medical device are manufacturer, and through the dealer sold to the end consumer. Most manufacturers and some original equipment manufacturer are the development of there own brand, to establish brand equity and visibility. Companies that adopt differentiated strategies will adopt mergers and acquisitions, the other that adopt low-cost strategies are mostly vertically integrated. Moreover, the medical device manufacturers export ratio higher than the domestic ratio, and more exported to Europe and the United States. Providing after-sales service helps to maintain long-term relationships with customers. This strategy is also one of the methods that most vendors will adopt. When the companies in the R & D technology is mature, they will establish a patented technology and team to develop their own products. In addition, overseas expansion will help them to build awareness.
Yiu-HuanChiu e 邱鈺桓. "A study of business model for medical tourism in Asia". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/60536215960271780261.
Testo completo國立成功大學
創意產業設計研究所
98
Due to the globalization, medical traveler can seek medical service easily for low cost and good quality. For destination hospitals, medical tourism is a new kind of business for them to incorporate with tourism industry. Take Taiwan for instance, under the global budget system, it decreased the income of hospitals. It forces local hospitals to develop medical tourism for increasing their profit. In the present stage, the market of Taiwan concentrated on regional market, since the limitation of language and culture, which made them to take China as target market. The study is completely qualitative research to analyze the business model for medical tourism in Asia. The goal of the research is to suggest business strategy for domestic hospitals to develop international medical tourism. Survey the evolution of medical tourism is the other purpose to understand the history. It mainly conducts the methods of document analysis and experts interview. In the design process, the author used the best practice, Parkway Holdings Limited, Singapore, to make general principles for business strategy to develop international market. Then, follow the general principles to compare with Shin Kong Memorial Hospital, which is focus on regional market, especially in Chinese market, with the advantages of culture and language. The conclusion of the research is that for domestic hospital, setting international channels, getting international accreditation, enhancing the education of the employees, providing transparent information and providing customized service are critical strategies. However, during the research, the limitation restrains the analysis. The lack of literature, few of cases to study and uneasy to get detail information of business model are the limitations.
Hsu, Hsuan-Ling, e 許軒領. "Utilizing Shallow Semantic Answer Inference Model for Medical Question Answering". Thesis, 2008. http://ndltd.ncl.edu.tw/handle/75194482529018595307.
Testo completo國立成功大學
醫學資訊研究所
96
This paper proposes Shallow Semantic Question Analysis Model and Shallow Semantic Answer Inference Model to address some general medical questions according to the observation and analysis of user questions. Considering the condition that general users are not in the background of medical expertise, we analyze questions by identifying both shallow semantic Entity and Feature according to the keywords of users’ questions. Moreover, we use Google to find relevant documents which can answer user questions. Then, we propose Shallow Semantic Answer Inference Model using the classification architecture provided by National Library of Medicine (NLM) to construct our models and match the conceptual keywords with medical related documents in Kingnet. Finally, we utilize the trained Shallow Semantic Answer Inference Model and relevant documents to find the corresponding phrase-level, sentence-level, and paragraph-level answers for users. In Chinese QA research until now, there is no automatic medical QA system developed for general users. Therefore, there is no better benchmark for evaluation. We can only evaluate the performance of our system. We utilize MRR as our evaluation metric and evaluate the accuracy of phrase-level answers, sentence-level answers and paragraph-level answers, and obtain a result of 0.553, 0.5771, and 0.5886, respectively. Although there is no similar system for our comparison, however, without sufficient Chinese medical resources, we try to utilize two proposed models and existing medical resources, such as MMODE, Chinese-English bilingual MeSH concept terms, and NLM Classification to build a Chinese medical QA system which can deal with users’ natural language questions.
Yang, Morris, e 楊崇謨. "The Analysis of Business Model Feasibility of Medical Wireless Network". Thesis, 2006. http://ndltd.ncl.edu.tw/handle/78705826620069284347.
Testo completo國立交通大學
管理學院高階主管管理碩士學程
94
This research dedicates to explore the feasibility for business operational model of wireless medical network and seek future blue ocean strategy in the medical industry. Through well-developed technology in communication, innovative operational model and integrating upstream and downstream business resources, we can create new blue ocean strategy for Taiwan. All the industries will consistently invest considerable capital and human resource in research and design of the wireless medication and home health care due to the rapid-growing aging population around the world. Medical wireless networks will be the core of wireless medication and home health care market. The wireless medication business model will gradually shape up according to the technology development and consumer demand. Technology, service and product manufacturers like Microlife, D-Link and Alpha Networks, will be the key providers within the business model. In this paper, by creating and delivering unique value to the customer, we hope to obtain a higher level of profitability as manufacturers. It will be the most significant contribution to this research.