Bibliografie tematiche / Material production

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Material production"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 30 maggio 2022

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Material production".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Material production"

Paton, B. E., e V. I. Trefilov. "Proposals for the ISS: Production of new unique materials in space («Material» Project)". Kosmìčna nauka ì tehnologìâ 6, n. 4 (30 luglio 2000): 20–21. http://dx.doi.org/10.15407/knit2000.04.020.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Palievskaya, E. A., e Z. A. Sidlin. "State of raw material base of electrode production". Paton Welding Journal 2014, n. 6 (28 giugno 2014): 190–93. http://dx.doi.org/10.15407/tpwj2014.06.39.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Vanickova, Radka. "Production material requirements in material ordering". Economic Annals-ХХI 156, n. 1-2 (aprile 2016): 105–8. http://dx.doi.org/10.21003/ea.v156-0024.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Shtirc, Liudmila, Svetlana G. Vlasova e Dmitry Meshcherskikh. "Porous Material Production and Material Properties". Materials Science Forum 946 (febbraio 2019): 84–90. http://dx.doi.org/10.4028/www.scientific.net/msf.946.84.

Testo completo

Abstract (sommario):

In our work we defined two directions for synthesizing porous material: pulping selected experimental glass compositions and using caustic soda as a foaming agent. We studied the foaming temperature settings, investigated the porous material properties. The intensity of the foaming process was estimated from the value of the foaming coefficient.

Gli stili APA, Harvard, Vancouver, ISO e altri

Hinková, A., e Z. Bubník. "Sugar beet as a raw material for bioethanol production". Czech Journal of Food Sciences 19, No. 6 (10 febbraio 2013): 224–34. http://dx.doi.org/10.17221/6612-cjfs.

Testo completo

Abstract (sommario):

Overproduction of sugar causes a reduction in the acreage under sugar beet. That is why new non-food technologies for exploitation of agricultural products are sought. Utilization of beet for liquid fuel production could be one of them. The aim of experiments with sugar beet raw juice fermentation was to verify the possibility to return a part of distiller’s slops back to the fermentation process and thereby to obtain stillage with higher content of dry solids. This would bring about energy savings during slops thickening and drying. Tests with recycling of different portions of stillage (20, 25 and 30%) back to the fermentation stage were carried out. No significant increase in dry solids content in mash was found and therefore no energy savings during thickening can be expected. The only savings can be made in water consumption that is replaced by slops.

Gli stili APA, Harvard, Vancouver, ISO e altri

Allwood, Julian M., Michael F. Ashby, Timothy G. Gutowski e Ernst Worrell. "Material efficiency: providing material services with less material production". Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 371, n. 1986 (13 marzo 2013): 20120496. http://dx.doi.org/10.1098/rsta.2012.0496.

Testo completo

Abstract (sommario):

Material efficiency, as discussed in this Meeting Issue, entails the pursuit of the technical strategies, business models, consumer preferences and policy instruments that would lead to a substantial reduction in the production of high-volume energy-intensive materials required to deliver human well-being. This paper, which introduces a Discussion Meeting Issue on the topic of material efficiency, aims to give an overview of current thinking on the topic, spanning environmental, engineering, economics, sociology and policy issues. The motivations for material efficiency include reducing energy demand, reducing the emissions and other environmental impacts of industry, and increasing national resource security. There are many technical strategies that might bring it about, and these could mainly be implemented today if preferred by customers or producers. However, current economic structures favour the substitution of material for labour, and consumer preferences for material consumption appear to continue even beyond the point at which increased consumption provides any increase in well-being. Therefore, policy will be required to stimulate material efficiency. A theoretically ideal policy measure, such as a carbon price, would internalize the externality of emissions associated with material production, and thus motivate change directly. However, implementation of such a measure has proved elusive, and instead the adjustment of existing government purchasing policies or existing regulations— for instance to do with building design, planning or vehicle standards—is likely to have a more immediate effect.

Gli stili APA, Harvard, Vancouver, ISO e altri

YASUI, Teruo. "Departure from material production." Journal of Synthetic Organic Chemistry, Japan 49, n. 2 (1991): 158–62. http://dx.doi.org/10.5059/yukigoseikyokaishi.49.158.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Lewis, Jeffrey. "China's fissile-material production". Adelphi Series 54, n. 446 (3 aprile 2014): 77–98. http://dx.doi.org/10.1080/19445571.2014.995424.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Staats, Gotthard, e Edgar Weichert. "Production of reference material". Fresenius' Zeitschrift für analytische Chemie 323, n. 5 (gennaio 1986): 460–63. http://dx.doi.org/10.1007/bf00470760.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Frank, Dieter, e Gotthard Staats. "Production of reference material". Fresenius' Zeitschrift für analytische Chemie 327, n. 5-6 (gennaio 1987): 456–60. http://dx.doi.org/10.1007/bf00487226.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Material production"

Olle, Chase R. "Pyrolytic graphite production : automation of material placement". Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/93847.

Testo completo

Abstract (sommario):

Thesis: M. Eng. in Manufacturing, Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 78-79).
This research examines the process and challenges associated with the addition of an autonomous transfer robot to a manufacturing line for AvCarb Material Solutions for use in production of pyrolytic graphite. Development of the system included the design and fabrication of an end-effector, selection of a SCA RA robotic arm, and incorporation of a vision system. The arm and the end-effector were tested to see if material would shift during transfer. The entire system was tested for repeatability and transfer time. The results of the test indicted that the transfer system would successfully meet specifications with high process capability given by a Cpk of 1.47.
by Chase Olle.
M. Eng. in Manufacturing

Gli stili APA, Harvard, Vancouver, ISO e altri

Stridh, Madeleine. "Material flow : An analysis of a production area for improved material flow". Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-80193.

Testo completo

Abstract (sommario):

Focus in the world today is quality and customer orientation. An organization needs to understand the concept of value from the perspective of a customer in order to keep up with expectations on quality, and the turbulent and global environment of today characterized by rapidly changing conditions. This master thesis project was conducted at ABB in Sweden during spring 2020. It is essential for ABB to have an ongoing focus on improvement to maintain a successful organization and enable a competitive future of quality and innovation. The aim of this project was to identify ways to improve material flow and reduce the amount of non-value-added activities that exist in a particular assembly process today. The objective of the project was to conduct proposals on realistic actions for improvement for implementation. Initially in the project a current state was performed and compiled into a specification of requirements and visualized through overall mapping of the material and communication flow. Two of the requirements were reducing the total lead time and ensure the same, or improved, physical and psychosocial work environment. The result of the current state showed that material is not available when needed, material shelves are not structured, and material flow is not optimal. Analysis methods used for analyzing the current state were material flow charts, value stream mapping and spaghetti diagrams. The outcome of the performed analyzes were then used as the foundation for a compiled list of problem areas. All previous performed work was then summarized, discussed and developed into a list of actions for improvement. This phase was performed by initially generating a great amount of ideas, which were then reviewed and evaluated in consideration of the specification of requirements. In addition to the final list of actions, a mapping of the future state was conducted to support the actions and visualize what a future state could look like if the actions are implemented. Lastly, the final list of actions was complemented with another list – a living document of the actions. This document gives the opportunity on a regular basis to monitor progress and should be regularly reviewed and updated. To ensure a successful implementation of improvement work based on the conducted action list, it is recommended to define and clarify responsibility for each action as well as target date and end date. Furthermore, the list should be continuously modified to ensure implementation. It is as well recommended to acknowledge implemented improvements in parallel with performing actions to maintain motivation. Additionally, participation in implementation and promoting dialogue, transparency and respect are valuable factors reducing the negative effects of the implementation of improvement concepts and contributes to a sustainable development of the improvement work.

Gli stili APA, Harvard, Vancouver, ISO e altri

Yi, He. "Agent-based Material Planning for Evolvable Production System". Thesis, KTH, Industriell produktion, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-103016.

Testo completo

Abstract (sommario):

The two main characteristics of current market are dynamicity and unpredictability which can’t be satisfied by the traditional manufacturing system through pre-set parameters. Traditional production system is facing the challenge that evolves to a new generation manufacturing system which manufactures products in flexible volume with rapid product definition and system configuration. The advent of Evolvable Production System offers promising approach to adapt to the increasing customer consciousness and product differentiation. EPS improves system re-configurability by process-oriented modularity and multi-agent based distributed control system. Hakan Akillioglu (2011) proposed a demand responsive planning framework to enlighten the relation between planning system structure and the manufacturing system characteristics. The proposed planning is still at the preliminary phase, it contains the coherent flow of planning activities and aims to achieve complementary model of production system and planning framework. This thesis is based on Hakan’s planning framework and focus on the development of the domain between material inventory and the material on the shop floor. The critical prerequisite of the proposed model is that material required to be delivered in the right type material, right amount and at the right location and right time under the dynamic environment of EPS.

Gli stili APA, Harvard, Vancouver, ISO e altri

Fung, Koon-yau, e 馮冠游. "A study of material planning in cigarette production". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1990. http://hub.hku.hk/bib/B31264633.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Underwood, Sarah Anne. "The production of human material for skin replacement". Thesis, University College London (University of London), 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.325362.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

McCaskey, Donald Wayne. "Effective dispatching in the material requirements planning job shop /". Connect to resource, 1987. http://rave.ohiolink.edu/etdc/view.cgi?acc%5Fnum=osu1264613608.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Gustafsson, Jesper, e Mikael Landberg. "Production of bio-plastic materials from apple pomace : A new application for the waste material". Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-21216.

Testo completo

Abstract (sommario):

Extensive quantities of apple pomace are generated annually but disposal of this waste is still much disputed. In EU alone, 500 000 tons are produced every year. Without further treatment, the acidic character of apples with their high sugar and low protein content makes the pomace unsuitable for landfilling and animal feedstock. However, further treatment is usually not economically feasible. This study addresses this issue by introducing a new approach for the apple pomace to produce sustainable materials. The high content of sugars in apple pomace which can be reshaped and reformed at higher temperatures makes the waste material suitable for plastic production. Other components found in apple pomace are 5 % proteins and 1.5 % fats. Fibers are abundant, dietary fibers amounts for more than half (55 %) the original apple pomace weight. Phenols, sorbitol and acids can be found in minor mount, 2 % or less. The apple pomace itself is a mixture of mostly pulp and peel which corresponds to 9/10 of the total mass. Whereas seeds, seed core and stalk are the remaining 1/10. The possibilities of utilizing apple pomace to produce biofilms and 3D shapes have been investigated. The effects of introducing orange pomace, another waste material produced in extensive quantities, to apple pomace samples has also been studied. Two methods were used to produce bioplastic materials; solution casting and compression molding. Glycerol was used as a plasticizer. Apple pomace, either washed or not washed, was oven-dried and milled into a fine powder. Using compression molding, plates or cups of the two powders with different amounts of glycerol were prepared. Mixtures of apple pomace and orange pomace, with or without glycerol, were prepared in the same way. The apple pomace was also used in a film casting method to produce plastic films. Applying laser cutting to the plates and plastic films, dog-bone specimens were created whose mechanical properties were analysed using a universal testing machine. Highest values in terms of tensile strength and elongation at max was reached with bioplastics produced from solution casting where the values varied in the range 3.3 – 16 MPa and 11 – 55 % respectively. The compression molding approach resulted in tensile strength values in the range 0.94 – 5.9 MPa whereas the elongation at max was in the range 0.30 – 1.9 %. A possible application for this material could be disposable tableware which does not require high mechanical strength. It was shown that it is possible to produce 3D structures and plastic films from apple pomace. Washed apple pomace with glycerol has similar properties as not washed apple pomace without the plasticizer. Adding orange pomace to apple pomace samples increases the tensile strength at the expense of the elongation at max. The pressing conditions and powder size greatly effects the mechanical properties, where a larger powder size lower the values for the mechanical properties. This new approach paves the way for a new utilization of apple pomace to replace some petroleum-based materials and at the same time solve the disposal problem of apple pomace.

Gli stili APA, Harvard, Vancouver, ISO e altri

Zhao, Ying. "Optimization of cooperative material handling systems". Click to view the E-thesis via HKUTO, 2006. http://sunzi.lib.hku.hk/hkuto/record/B37837710.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Albers, Jason. "Bill of material testing for enterprise resource planning (ERP) implementation". Menomonie, WI : University of Wisconsin--Stout, 2004. http://www.uwstout.edu/lib/thesis/2004/2004albersj.pdf.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Gustafsson, Daniel, e Mikael Johansson. "A Material Flow Evaluation at Scania Production Slupsk S.P.S". Thesis, Linköping University, Department of Management and Engineering, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-10133.

Testo completo

Abstract (sommario):

This master’s thesis is performed at Department of Management and Engineering Linköping University, for Scania Omni at Scania Production Slupsk (S.P.S). Omni is responsible for development, manufacturing and marketing of city, suburban and intercity buses. After acquisition of the production unit in Slupsk in 2002 lower production cost per bus is possible. But without control over the organisation costs are rising due to late delivery fees and high stock levels. At the outset, the thesis included three clearly defined objectives:

- Map the present situation at Scania Production Slupsk regarding material flow from supplier to assembly line including a part and storage analysis.

- Benchmark the current routines at Scania Production Slupsk with other successful companies. Furthermore, conduct literature research in order to find theories and philosophies that support problem analysis and thesis solution.

- Develop standard routines for material control methods (MCM) and material supply methods (MSM).

A complimentary objective is to work as a catalyst during the time of the thesis.

The mapping of the present situation showed that MCM and MSM are very tight connected to each other. It was questioned whether this structure was the best way to manage the material flow. After a parts and storage analysis, material was divided into different segments depending of price, consumption and movement.

The benchmarking studies showed different ways to manage the material flow. Implementation of unit load, kanban and clear defined interface between departments showed potential to improve the material handling and increase effectiveness.

New routines and part segment definitions described in a logistics manual (Appendix I) were made align with a comparison between previous and recommended definitions.

The result showed that some parts needs to be controlled differently. Primary recommendations are that logistics manual shall be used when new parts are introduced into the Scala system. Responsible personnel are suppose to give suggestion concerning decision making of MCM and MSM and with help of the logistics manual the work can be more efficient, resulting in a material flow that is flexible and have potential for improvements.

Secondary, to avoid material handling to some extent implementation of two-bin system is recommended. Additional recommendations regarding two-bin system is to handle material according to unit load, which enable FIFO, traceability and higher turn over rate

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Material production"

Fairchild, Nikki, Carol A. Taylor, Angelo Benozzo, Neil Carey, Mirka Koro e Constanse Elmenhorst. Knowledge Production in Material Spaces. London: Routledge, 2021. http://dx.doi.org/10.4324/9781003029007.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Matter: Material processes in architectural production. New York: Routledge, 2012.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Richard, Speier, Jones Gregory S, United States. Dept. of Defense. Office of the Secretary of Defense. e National Defense Research Institute (U.S.), a cura di. The proposed fissile-material production cutoff: Next steps. Santa Monica, CA: Rand, 1995.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Chow, Brian G. The proposed fissile-material production cutoff: Next steps. Santa Monica, CA: Rand, 1995.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Peter James le Breton Williams. Production & consumption of organic material in the sea. Birmingham: University of Birmingham, 1995.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

P, Stephens Matthew, a cura di. Manufacturing facilities design and material handling. 3^a ed. Columbus, Ohio: Pearson Prentice Hall, 2005.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Karlsson, Christer. Knowledge and material flow in future industrial networks. Brussels: European Institute for Advanced Studies in Management, 1991.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

1971-, Smith Chad, e Orlicky Joseph, a cura di. Orlicky's material requirements planning. 3^a ed. New York: McGraw-Hill, 2011.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Orlicky, Joseph. Orlicky's material requirements planning. 2^a ed. New York: McGraw-Hill, 1994.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Chris, Harris, e Wilson Earl, a cura di. Making materials flow: A lean material-handling guide for operations, production-control, and engineering professionals. Brookline, MA: Lean Enterprise Institute, 2003.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Capitoli di libri sul tema "Material production"

Schulze, V. "Material Modelling". In Lecture Notes in Production Engineering, 29–32. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-57120-1_4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Dini, Gino, e Dieter Spath. "Material Flow". In CIRP Encyclopedia of Production Engineering, 1–8. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-642-35950-7_9-4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Salonitis, Konstantinos, Apostolos Fysikopoulos e George Chryssolouris. "Abrasive Material". In CIRP Encyclopedia of Production Engineering, 1–7. Berlin, Heidelberg: Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-642-35950-7_6416-4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Salonitis, Konstantinos, Apostolos Fysikopoulos e George Chryssolouris. "Abrasive Material". In CIRP Encyclopedia of Production Engineering, 1–6. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-20617-7_6416.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Dini, Gino, e Dieter Spath. "Material Flow". In CIRP Encyclopedia of Production Engineering, 844–51. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-20617-7_9.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Salonitis, Konstantinos, Apostolos Fysikopoulos e George Chryssolouris. "Abrasive Material". In CIRP Encyclopedia of Production Engineering, 4–10. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-53120-4_6416.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Dini, Gino, e Dieter Spath. "Material Flow". In CIRP Encyclopedia of Production Engineering, 1150–57. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-53120-4_9.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Saranen, Juha P. "Simulation in material flow design". In Global Production Management, 384–90. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-0-387-35569-6_47.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Mayes, Sean, Jeremy Roberts, Choo Kien Wong, Chin Nee Choo, Wei Chee Wong, Cheng Chua Tan, Abdul Razak Purba e Aik Chin Soh. "Commercial Planting Material Production". In Oil Palm Breeding, 297–326. Boca Raton : Taylor & Francis, 2017.: CRC Press, 2017. http://dx.doi.org/10.1201/9781315119724-11.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Ng, Leonard W. T., Guohua Hu, Richard C. T. Howe, Xiaoxi Zhu, Zongyin Yang, Christopher G. Jones e Tawfique Hasan. "2D Material Production Methods". In Printing of Graphene and Related 2D Materials, 53–101. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-91572-2_3.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Material production"

Winton, James. "New Material for Sail Production". In High Performance Yacht Design. RINA, 2012. http://dx.doi.org/10.3940/rina.hpyd.2012.10.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Vorotnikov, D., Ilya Medvedev e V. Kitaev. "SOFT WOODS – RAW MATERIALS FOR INNOVATIVE PRODUCTION OF CONSTRUCTION MATERIAL". In Ecological and resource-saving technologies in science and technology. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2022. http://dx.doi.org/10.34220/erstst2021_43-47.

Testo completo

Abstract (sommario):

Currently, there is a tendency in the world to increase the demand for new structural materials with high performance characteristics. Wood is considered a good and widespread structural material used in the construction of various structures and structures. However, the use of natural wood as a structural material in comparison with reinforced concrete and metal is limited by a number of significant drawbacks: wood is subject to rot, is not fire-resistant, does not meet modern operational requirements. The proposed technology to improve the physical and mechanical properties of soft hardwood wood will allow to obtain a structural material that meets modern requirements. When implementing the proposed technology, the problem of rational use of low-value soft hardwood is solved.

Gli stili APA, Harvard, Vancouver, ISO e altri

Sakuma, Ryosuke, Yoshiyuki Shirakawa, Atuko Shimosaka e Jyusuke Hidaka. "Production of New Hydrogen Storage Material using a Porous Material". In 5th Asian Particle Technology Symposium. Singapore: Research Publishing Services, 2012. http://dx.doi.org/10.3850/978-981-07-2518-1_179.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Watson, Chris, e Tom Millsap. "Friction Material; from Prototype to Production". In Annual Brake Colloquium And Engineering Display. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1999. http://dx.doi.org/10.4271/1999-01-3389.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Williams, A. J. "Material transportation for high production volumes". In 4th International Conference on Advanced Factory Automation (Factory 2000). IEE, 1994. http://dx.doi.org/10.1049/cp:19940844.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Taeusch, David R. "Material Processing Laser Systems In Production". In SPIE International Symposium on Optical Engineering and Industrial Sensing for Advance Manufacturing Technologies, a cura di Robert J. Bieringer e Kevin G. Harding. SPIE, 1988. http://dx.doi.org/10.1117/12.947783.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Stroia-Williams, P., A. Hilton e O. Grau. "Mutual Illumination Correction for Compositing and Material Editing". In 2009 Conference for Visual Media Production (CVMP). IEEE, 2009. http://dx.doi.org/10.1109/cvmp.2009.12.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Belonosova, E. K., L. S. Pershina, I. A. Pavlova, K. G. Zemlyanoj, D. D. Kon'kov e E. P. Farafontova. "Production of heat-stable cordierite ceramic material". In PROCEEDINGS OF THE 16TH INTERNATIONAL CONFERENCE ON INDUSTRIAL MANUFACTURING AND METALLURGY (ICIMM 2021). AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0075958.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Blackburn, N. A. "Downhole Material Selection for Clyde Production Wells: Theory and Practice". In European Production Operations Conference and Exhibition. Society of Petroleum Engineers, 1994. http://dx.doi.org/10.2118/27604-ms.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Jensen, Jeppe, Ketil Sorensen, Susanne Juhler e Thomas Lundgaard. "New Test for Material Resistance against Microbiologically Influenced Corrosion". In SPE International Production and Operations Conference & Exhibition. Society of Petroleum Engineers, 2012. http://dx.doi.org/10.2118/157388-ms.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Material production"

Brooks, Stephen. Measurement of first magnet made with production material. Office of Scientific and Technical Information (OSTI), dicembre 2017. http://dx.doi.org/10.2172/1471185.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Bane, Scott Campbell. Modernize Enduring National Security Nuclear Material Production Facility (MENSNMPF). Office of Scientific and Technical Information (OSTI), aprile 2019. http://dx.doi.org/10.2172/1511214.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Wong, Amy, Denise Thronas e Robert Marshall. Lawrence Livermore National Laboratory Working Reference Material Production Pla. Office of Scientific and Technical Information (OSTI), novembre 1998. http://dx.doi.org/10.2172/2904.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Kelley, Evelyn A. Fissile Material Disposition Program: Oxide Production program Quarterly Report - 1QFY14. Office of Scientific and Technical Information (OSTI), gennaio 2014. http://dx.doi.org/10.2172/1116690.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Dunn, Jennifer B., Christine James, Linda Gaines, Kevin Gallagher, Qiang Dai e Jarod C. Kelly. Material and Energy Flows in the Production of Cathode and Anode Materials for Lithium Ion Batteries. Office of Scientific and Technical Information (OSTI), settembre 2015. http://dx.doi.org/10.2172/1224963.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Dunn, Jennifer B., Christine James, Linda G. Gaines e Kevin Gallagher. Material and Energy Flows in the Production of Cathode and Anode Materials for Lithium Ion Batteries. Office of Scientific and Technical Information (OSTI), settembre 2014. http://dx.doi.org/10.2172/1172039.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Johnson, M. C., e J. L. Sullivan. Lightweight Materials for Automotive Application: An Assessment of Material Production Data for Magnesium and Carbon Fiber. Office of Scientific and Technical Information (OSTI), settembre 2014. http://dx.doi.org/10.2172/1172026.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Podvig, Pavel. Freeze and Verify: Ending Fissile Material Production on the Korean Peninsula. The United Nations Institute for Disarmament Research, settembre 2020. http://dx.doi.org/10.37559/wmd/20/tv/01.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Palo, Daniel R. Quarterly Report: Microchannel-Assisted Nanomaterial Deposition Technology for Photovoltaic Material Production. Office of Scientific and Technical Information (OSTI), aprile 2011. http://dx.doi.org/10.2172/1027187.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Glenn J. W., D. Lazarus, P. Pile, J. Sculli e J. Walker. The dependence of low momentum particle production on target material and thickness. Office of Scientific and Technical Information (OSTI), luglio 1985. http://dx.doi.org/10.2172/1157440.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!