Letteratura scientifica selezionata sul tema "Machining finishing"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Machining finishing".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Machining finishing"
Fang, J. C., Z. J. Jin, W. J. Xu e Y. Y. Shi. "Magnetic electrochemical finishing machining". Journal of Materials Processing Technology 129, n. 1-3 (ottobre 2002): 283–87. http://dx.doi.org/10.1016/s0924-0136(02)00666-0.
Testo completoFarwaha, Harnam Singh, Sehijpal Singh Khangura e Gurpreet Singh. "Design and Performance of Magnetic Abrasive Finishing Set Up for Finishing of Extended Surfaces". Asian Review of Mechanical Engineering 5, n. 1 (5 maggio 2016): 1–4. http://dx.doi.org/10.51983/arme-2016.5.1.2413.
Testo completoZhang, Cheng Guang, Y. Z. Hu e Bo Zhao. "Study on Model of Ultrasonic Polishing Machining - Pulse Electro- Chemical Machining Compound Finishing for the Hard and Brittle Metals". Key Engineering Materials 455 (dicembre 2010): 653–57. http://dx.doi.org/10.4028/www.scientific.net/kem.455.653.
Testo completoEdigarov, Vyacheslav, e Evgenii Litau. "Parts finishing antifriction electromechanical machining". Metal Working and Material Science, n. 3 (15 settembre 2015): 6–15. http://dx.doi.org/10.17212/1994-6309-2015-3-6-15.
Testo completoMassarsky, Michael, e David A. Davidson. "Turbo-abrasive machining and finishing". Metal Finishing 95, n. 7 (luglio 1997): 29–31. http://dx.doi.org/10.1016/s0026-0576(97)87995-0.
Testo completoSheng, P. S., e Ko-Wang Liu. "Laser Machining for Secondary Finishing Applications". Journal of Engineering for Industry 117, n. 4 (1 novembre 1995): 629–36. http://dx.doi.org/10.1115/1.2803543.
Testo completoLiang, Fu Sheng, Ji Zhao, Shi Jun Ji e Xin Wang. "Spherical Approximation of Free-Form Surface Closed to a Sphere in Semi-Finishing". Key Engineering Materials 679 (febbraio 2016): 199–206. http://dx.doi.org/10.4028/www.scientific.net/kem.679.199.
Testo completoLi, Xiu Hong, Wen Hui Li e Sheng Qiang Yang. "Preparation Technology and Surface Finishing Characteristics Research of New Magnetic Abrasive Tools". Key Engineering Materials 522 (agosto 2012): 21–25. http://dx.doi.org/10.4028/www.scientific.net/kem.522.21.
Testo completoPavlushenko, Nellie, Alexandr Bachurin e Nikolay Ryngach. "Relationship between Quenching Deformations and Machining Allowance". Applied Mechanics and Materials 698 (dicembre 2014): 478–81. http://dx.doi.org/10.4028/www.scientific.net/amm.698.478.
Testo completoLiao, Yu Song, e Jiang Han. "Research on Semi-Finishing of NC Milling". Key Engineering Materials 693 (maggio 2016): 872–77. http://dx.doi.org/10.4028/www.scientific.net/kem.693.872.
Testo completoTesi sul tema "Machining finishing"
Qu, Xiuzhi. "An integrated approach to finish machining of RP-produced parts /". View online ; access limited to URI, 2003. http://0-wwwlib.umi.com.helin.uri.edu/dissertations/dlnow/3112126.
Testo completoDHULL, SACHIN. "INVESTIGATION OF HYBRID ELECTROCHEMICAL AND MAGNETIC FIELD ASSISTED ABRASIVE FLOW FINISHING PROCESS". Thesis, DELHI TECHNOLOGICAL UNIVERSITY, 2021. http://dspace.dtu.ac.in:8080/jspui/handle/repository/18780.
Testo completoVenkatachalam, Sivaramakrishnan. "Predictive Modeling for Ductile Machining of Brittle Materials". Diss., Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/19774.
Testo completo森, 敏彦, Toshihiko MORI, 健治 広田, Kenji HIROTA, 進幸 千田, Shinkoh SENDA, 義人 川嶋 e Yoshihito KAWASHIMA. "磁気研磨機構に関する力学的考察". 日本機械学会, 2002. http://hdl.handle.net/2237/9029.
Testo completoGilmore, Rhys. "An Evaluation of Ultrasonic Shot Peening and Abrasive Flow Machining As Surface Finishing Processes for Selective Laser Melted 316L". DigitalCommons@CalPoly, 2018. https://digitalcommons.calpoly.edu/theses/1935.
Testo completoCosta, Ronaldo Ferreira da. "Efeitos dos parâmetros de usinagem na formação da camada branca em torneamento duro nos aços-rolamento (DIN 100 Cr6)". Universidade de São Paulo, 2007. http://www.teses.usp.br/teses/disponiveis/3/3133/tde-19072007-163542/.
Testo completoThis work deals with the microstructural changes in the surface of steels machined by hard turning. A non-acceptable microstructure, called White Layer - WL, is usually found in the hard turned surface. The presence of the white layer depends on hard turning parameters, especially on the wear of the machining tool and cutting speed. The formation of the white layer was investigated in the present work by hard turning the inferior face of a roller-bearing ring fabricated with DIN 100Cr6 steel quenched and tempered (60 HRC hardness). The depth of the WL was measured by standard metallographic procedures. The mechanical properties (stiffness modulus, E, and Vickers hardness) of the surface layer were measured by intrumented indentation in three samples: one with no WL, and two containing a WL of respectively 7 and 12 mm. According to the literature the depth of the WL increases with the wear of the machining tool. This increased with cutting speed, but reaches saturation. The presentresults confirm an effect of tool advance upon the depth of the WL, such that decreasing the advance leads to an increase in its depth, but an effect of tool wear could not be recognized. The formation of the WL is discussed in the context of its effect on surface roughness.
Aguiar, Marcelo Mendes de. "Análise da influência das condições de corte sobre o fresamento em acabamento de aços endurecidos usando altas velocidades". [s.n.], 2012. http://repositorio.unicamp.br/jspui/handle/REPOSIP/264165.
Testo completoDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica
Made available in DSpace on 2018-08-19T18:33:44Z (GMT). No. of bitstreams: 1 Aguiar_MarceloMendesde_M.pdf: 3795090 bytes, checksum: a76ee2a93e8e7595881459d7a6d71b50 (MD5) Previous issue date: 2012
Resumo: Normalmente, a utilização de aços ferramenta endurecidos, juntamente com as formas complexas típicas das peças utilizadas na área de moldes e matrizes, oferecem dificuldade na usinagem por fresamento, principalmente nas operações de acabamento que exijam o uso de ferramentas longas. A técnica de fresamento HSM (High Speed Machining - usinagem em altas velocidades, ou ainda High Speed Milling - fresamento em altas velocidades) tem se tornado uma alternativa para realizar este tipo de usinagem, reduzindo, ou às vezes até eliminando operações de eletro-erosão e polimento. Tipicamente, as fresas de pastilhas de metal duro intercambiáveis tem sido usadas em operações de desbaste e semi-acabamento, enquanto nas operações de acabamento ou em usinagem de geometrias que exijam ferramentas com pequenos diâmetros ainda predomina o uso de fresas inteiriças. O objetivo principal deste estudo é avaliar a influência de cinco variáveis de processo de fresamento com alta velocidade de corte, sobre o acabamento da superfície usinada. A influência do desgaste das ferramentas sobre o acabamento superficial, ao longo de 400 minutos de usinagem, também foi avaliado, além de uma comparação entre ferramentas inteiriças de metal duro e ferramentas de pastilha intercambiável montada em corpo de metal duro, a fim de avaliar a viabilidade técnica do uso deste segundo tipo de ferramenta, em substituição às tradicionais fresas inteiriças utilizadas em operações de acabamento. Na maioria dos experimentos realizados, pequenos valores de rugosidade foram mantidos, demonstrando que operações de acabamento em aço ABNT H13 IM com dureza de 50 HRC é possível com vida longa de ferramenta, mesmo utilizando-se valor de 500 m/min para velocidade de corte. Além disto, a análise da influência das variáveis de processo utilizadas neste trabalho mostrou que é possível, sob algumas condições, utilizar tanto ferramentas inteiriças, quanto de pastilha intercambiável montada em corpo de metal duro em operações de acabamento
Abstract: Typically, the use of hardened tool steels, along with complex shapes typical of the parts used in the field of molds and dies, offer difficulty in machining by milling, mainly in finishing operations that demand the use of long tool. The HSM (High Speed Machining or High Speed Milling) has become a possible alternative for making this type of machining, reducing, or sometimes eliminating electric discharge machining and polishing operations. Usually, indexable carbide insert mills has been used for roughing and semi-finishing, while in finishing operations or when the machining geometries that require tools with small diameters the integral tools are used yet. The main objective of this study is to evaluate the influence of five process variables, with high cutting speed, on the finish of the machined surface. The influence of tool wear on surface finish through 400 minutes of milling was also evaluated, as well as a comparison between integral carbide mills and indexable insert mounted at cemented carbide toolholder endmills, in order to evaluate the technical feasibility of using this second type of tool, replacing the traditional integral carbide endmills used in finishing operations. In most experiments, small roughness values were maintained, showing that finishing operations on AISI H13 IM with a hardness of 50 HRC is possible with long tool life, even using the cutting speed of 500 m/min. Furthermore, the analysis of the influence of process variables used in this study showed that is possible, under some conditions, the use either integral carbide tools, or indexable insert mounted at cemented carbide toolholder endmills on finishing operations
Mestrado
Materiais e Processos de Fabricação
Mestre em Engenharia Mecânica
Filípek, Timotej. "Obrábění těžkoobrobitelných materiálů dokončovacími technologiemi". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444264.
Testo completoChardon, Grégory. "Usinage de moules en matériaux composites, expression des contraintes liées au procédé". Phd thesis, Université Blaise Pascal - Clermont-Ferrand II, 2011. http://tel.archives-ouvertes.fr/tel-00678330.
Testo completoPavézka, Vladimír. "Analýza dokončovacích způsobů obrábění". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229963.
Testo completoLibri sul tema "Machining finishing"
Sharma, Ankit, Amrinder Singh Uppal, Bhargav Prajwal Pathri, Atul Babbar e Chander Prakash. Modern Hybrid Machining and Super Finishing Processes. Boca Raton: CRC Press, 2024. http://dx.doi.org/10.1201/9781003327905.
Testo completoDas, S., G. Kibria, B. Doloi e B. Bhattacharyya, a cura di. Advances in Abrasive Based Machining and Finishing Processes. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-43312-3.
Testo completoPost processing treatment of composites. Covina, Calif: Society for the Advancement of Material and Process Engineering, 1996.
Cerca il testo completoIntersociety, Symposium on Machining of Advanced Ceramic Materials and Components (1988 Chicago Ill ). Intersociety Symposium on Machining of Advanced Ceramic Materials and Components: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Chicago, Illinois, November 27-December 2, 1988. New York, N.Y: American Society of Mechanical Engineers, 1988.
Cerca il testo completoA, Gregory Don, e United States. National Aeronautics and Space Administration., a cura di. Ion figuring of X-ray mirror mandrels: Final report, period of performance: June 14, 1996 to June 5, 1997; contract no. NAS83-8609 D.O. 166. [Washington, DC: National Aeronautics and Space Administration, 1997.
Cerca il testo completoIntersociety Symposium on Machining of Advanced Ceramic Materials and Components (1988 Chicago, Ill.). Intersociety Symposium on Machining of Advanced Ceramic Materials and Components: Presented at the winter annual meeting of the American Society of Mechanical Engineers, Chicago, Illinois, November 27-December 2, 1988. New York: The American Society of Mechanical Engineers, 1988.
Cerca il testo completoA, Gregory Don, e United States. National Aeronautics and Space Administration., a cura di. Ion figuring of X-ray mirror mandrels: Final report, period of performance: June 14, 1996 to June 5, 1997; contract no. NAS83-8609 D.O. 166. [Washington, DC: National Aeronautics and Space Administration, 1997.
Cerca il testo completoA, Gregory Don, e United States. National Aeronautics and Space Administration., a cura di. Ion figuring of X-ray mirror mandrels: Final report, period of performance: June 14, 1996 to June 5, 1997; contract no. NAS83-8609 D.O. 166. [Washington, DC: National Aeronautics and Space Administration, 1997.
Cerca il testo completoA, Gregory Don, e United States. National Aeronautics and Space Administration., a cura di. Ion figuring of X-ray mirror mandrels: Final report, period of performance: June 14, 1996 to June 5, 1997; contract no. NAS83-8609 D.O. 166. [Washington, DC: National Aeronautics and Space Administration, 1997.
Cerca il testo completoWalsh, Ronald A. McGraw-Hill machining and metalworking handbook. New York: McGraw-Hill, 1994.
Cerca il testo completoCapitoli di libri sul tema "Machining finishing"
El-Hofy, Hassan. "Mass Finishing Operations". In Fundamentals of Machining Processes, 351–67. Third edition. | Boca Raton, FL: CRC Press/Taylor & Francis Group,: CRC Press, 2018. http://dx.doi.org/10.1201/9780429443329-12.
Testo completoEl-Hofy, Hassan. "Abrasive Finishing Processes". In Fundamentals of Machining Processes, 273–304. Third edition. | Boca Raton, FL: CRC Press/Taylor & Francis Group,: CRC Press, 2018. http://dx.doi.org/10.1201/9780429443329-9.
Testo completoHuda, Zainul. "Abrasive Finishing Machining Operations". In Machining Processes and Machines, 201–11. First edition. | Boca Raton : CRC Press, 2020.: CRC Press, 2020. http://dx.doi.org/10.1201/9781003081203-15.
Testo completoSwavely, Donald S. "Finishing and Machining Plastics". In SPI Plastics Engineering Handbook of the Society of the Plastics Industry, Inc., 657–92. Boston, MA: Springer US, 1991. http://dx.doi.org/10.1007/978-1-4615-7604-4_23.
Testo completoChoi, Byoung K., e Robert B. Jerard. "Tool-path generation for finishing". In Sculptured Surface Machining, 166–85. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5283-3_8.
Testo completoSingh, Manpreet, Gagandeep Singh e Mohammad Alshinwan. "Advanced Finishing Processes for Cylindrical Surface Finishing". In Modern Hybrid Machining and Super Finishing Processes, 161–79. Boca Raton: CRC Press, 2024. http://dx.doi.org/10.1201/9781003327905-9.
Testo completoSingh, Sachin, Vishal Gupta e M. R. Sankar. "Magnetic Abrasive Finishing Process". In Materials Forming, Machining and Tribology, 183–210. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-43312-3_8.
Testo completoEl-Hofy, Hassan. "Magnetic Field–Assisted Finishing Processes". In Fundamentals of Machining Processes, 339–48. Third edition. | Boca Raton, FL: CRC Press/Taylor & Francis Group,: CRC Press, 2018. http://dx.doi.org/10.1201/9780429443329-11.
Testo completoUhlmann, Eckart, Gregor Hasper, Thomas Hoghé, Christoph Hübert, Vanja Mihotovic e Christoph Sammler. "Machining and Finishing of Ceramics". In Ceramics Science and Technology, 247–66. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2014. http://dx.doi.org/10.1002/9783527631940.ch41.
Testo completoUhlmann, Eckart, Gregor Hasper, Thomas Hoghé, Christoph Hübert, Vanja Mihotovic e Christoph Sammler. "Machining and Finishing of Ceramics". In Ceramics Science and Technology, 247–66. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2012. http://dx.doi.org/10.1002/9783527631957.ch10.
Testo completoAtti di convegni sul tema "Machining finishing"
Osada, Tsuginobu, Ken’ichi Yano e Mustapha S. Fofana. "Realization of Finishing Cuts Under Changing Machining Conditions by Machining Support Robots". In ASME 2010 Dynamic Systems and Control Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/dscc2010-4110.
Testo completoMUSIL, Vaclav, Marek SADILEK, Jiri KRATOCHVIL, Robert CEP e Jiri LICHOVNIK. "EVALUATION OF FINISHING MACHINING OF STAINLESS STEEL 1.4307". In METAL 2019. TANGER Ltd., 2019. http://dx.doi.org/10.37904/metal.2019.907.
Testo completoFeng, Hsi-Yung (Steve), e Ning Su. "Cutting Force Modeling and Optimization in 3D Plane Surface Machining". In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0690.
Testo completoKhatri, Atul, e Vinod Yadava. "Finite Element Simulation of Plane Magnetic Abrasive Finishing". In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-14239.
Testo completoBennett, Jean M., e Yoshiharu Namba. "Ductile Grinding Study of Glass Using an Ultra-Precision Surface Grinder and Different Grinding Wheels". In Science of Optical Finishing. Washington, D.C.: Optica Publishing Group, 1990. http://dx.doi.org/10.1364/sciof.1990.smb3.
Testo completoBrar, B. S., R. S. Walia, V. P. Singh e P. Singh. "Effects of Helical Rod Profiles in Helical Abrasive Flow Machining (HLX-AFM) Process". In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-53711.
Testo completoDavies, S. T., e D. J. Whitehouse. "Computer Controlled Ion Beam Machining For Precision Surface Finishing And Figuring". In Hague International Symposium, a cura di Manfred Weck. SPIE, 1987. http://dx.doi.org/10.1117/12.941273.
Testo completoAOKI, I., T. TAKAHASHI, K. SUZUKI e T. KITAJIMA. "EDGE FINISHING OF PRODUCTS WITH COMPLEX-SHAPE BY MAGNETIC ABRASIVE MACHINING". In Proceedings of the Third International Conference on Abrasive Technology (ABTEC '99). WORLD SCIENTIFIC, 1999. http://dx.doi.org/10.1142/9789812817822_0038.
Testo completoOKADA, A., Y. UNO, T. FURUKAWA, S. NAKA, S. YAMAMOTO e A. KINOSHITA. "INTERNAL SURFACE FINISHING OF SMALL HOLE BY ELECTROCHEMICAL MACHINING AFTER HONING". In Proceedings of the Third International Conference on Abrasive Technology (ABTEC '99). WORLD SCIENTIFIC, 1999. http://dx.doi.org/10.1142/9789812817822_0039.
Testo completoBarletta, M., G. Rubino, G. Bolelli, L. Lusvarghi e A. Bassani. "Fast Regime – Fluidized Bed Machining (FR-FBM) of Thermally Sprayed Coatings". In ITSC2008, a cura di B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima e G. Montavon. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. http://dx.doi.org/10.31399/asm.cp.itsc2008p0701.
Testo completo