Accedi

Bibliografie tematiche / Machine design / Articoli di riviste

Segui questo link per vedere altri tipi di pubblicazioni sul tema: Machine design.

Articoli di riviste sul tema "Machine design"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 29 luglio 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Machine design".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.

1

Waghmare, S. N., C. N. Sakhale, M. S. Giripunje e V. M. Sonde. "Design of Pig Casting Machine". International Journal of Engineering and Technology 2, n. 6 (2010): 586–71. http://dx.doi.org/10.7763/ijet.2010.v2.186.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Kumar Singh, Akhilesh, Giri Vijay Temmanaboina, Prasanth Gummalla e Pramod Kumar. "An Approach for Future-Oriented Framework Design: A Tool for Design Research". E3S Web of Conferences 184 (2020): 01049. http://dx.doi.org/10.1051/e3sconf/202018401049.

Testo completo

Abstract (sommario):

Metals and Metals-alloys play a significant role in the everyday life of researchers and also in industrial applications to develop a new framework product. New development of tool and techniques help researchers to do their work smoothly. Multi-purpose machines mainly help researchers to do framework design and research as per need and it will save both cost and time. In this paper, the main aim is to develop a machine-stand that performs machine operations in a single column (either side of the column). The operations are cutting, grinding, and drilling. The purpose of the machine is to support researchers in their research work, with high precision to drill without any (human error) vibrations and to cut the work-samples without edges loses. The machine is designed for portable purposes, that can be used in laboratory, field, workshop, and workplace, etc. to do operations of cutting and drilling in various places. The same machine is used for multi-operation, instead of using separate fixed flame machines such as cutting, grinding, and drilling machines. The machine operates through power sources with liquid coolant lubricant and the operations performed simultaneously or individually

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Ikebudu, K. O., E. O. Chukwumuanya, O. N. K. Swift e Nwokeocha Toochukwu. "Design of Pelletizing Machine (Balling Disc)". International Journal of Materials, Mechanics and Manufacturing 3, n. 1 (2015): 9–12. http://dx.doi.org/10.7763/ijmmm.2015.v3.156.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Bhatia, Anmol, Deepa Manani, Anubhav Grover e Jatin Kumar. "Design of Multi Spindle Drilling Machine". International Journal of Advance Research and Innovation 4, n. 2 (2016): 114–18. http://dx.doi.org/10.51976/ijari.421618.

Testo completo

Abstract (sommario):

In today’s world, the growth of Indian manufacturing sector is highly dependent on how productivity and quality. Productivity can be increased by improving the efficiency of the operations carried out in the organization. This can be done by reducing the machining time, combining the operations etc. Thus special purpose machines needs to be used and one such machine is multi spindle drilling machine which performs multiple drilling operations more accurately and conveniently. This paper presents the design and development of a multi spindle drilling machine which would have a higher productivity as compared to conventional drilling machines. The proper sequence wise design analysis of the components of multi spindle machine is discussed.

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Lerch, Tomasz. "Analysis of the Impact of Design Parameters on the Power Density of the New Design of the Cogging Machine". Energies 16, n. 7 (24 marzo 2023): 3000. http://dx.doi.org/10.3390/en16073000.

Testo completo

Abstract (sommario):

The cogging machine is a new design of a machine with permanent magnets, which combines the advantages of a machine with transverse flux (TFM), eliminating its disadvantages. The biggest advantage of TFM machines is their high torque density, which varies with the design parameters. The developed machine retains these advantages while simplifying the construction of the stator core, which is the biggest disadvantage of TFM machines. This article presents the results of an analysis of the power density of the developed cogging machine as a function of a number of pole pairs and the basic design parameters. Analyses were carried out on the basis of the derived analytical equations, which make the generated torque depend on the construction parameters. Thanks to the derived dependencies, one can easily examine the effects of modifying the machine structure. The results presented in the article prove that the developed design of the cogging machine is competitive in relation to machines with permanent magnets existing on the market.

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Cipto e Daniel Parenden. "Sago Extraction Machine Design". MATEC Web of Conferences 372 (2022): 01002. http://dx.doi.org/10.1051/matecconf/202237201002.

Testo completo

Abstract (sommario):

The production of sago starch in Papua is around 200 thousand tons per year, even though the potential is 4.75 tons of dry starch per year. The large potential for sago starch production cannot be realized optimally due to the low production capacity. The production capacity is doubtful because the sago processing process is still carried out traditionally. The problems encountered can be solved by applying machining technology to the sago production process. The application of technology in the form of production machines will improve the quality of sago starch and production capacity. The production capacity of sago starch can be increased through the application of technology in the production process. Especially the sago pith grating machine technology and sago starch extraction machine technology, because these two processes consume the most time when using traditional methods. The working principle of the sago starch extraction machine that has been made is that the rotation generated by the driving motor is channeled through the pulley transmission and the V-belt drives the gearbox, the rotation of the gearbox output shaft through the pulley transmission and the V-belt drives the stirring shaft. The production capacity of the sago extraction machine is planned to be 80 kg/hour. The design of the sago extraction machine uses wheels to facilitate the mobilization of the machine to the sago plantation area.

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Suh, Nam P., e Shinya Sekimoto. "Design of Thinking Design Machine". CIRP Annals 39, n. 1 (1990): 145–48. http://dx.doi.org/10.1016/s0007-8506(07)61022-1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

C., Mohankumar, Sudarsan S. e Elayaraja T. "Design and Fabrication of Chaff Cutter Machine". International Journal of Innovative Research in Advanced Engineering 11, n. 04 (5 aprile 2024): 292–96. http://dx.doi.org/10.26562/ijirae.2024.v1104.22.

Testo completo

Abstract (sommario):

India is an agricultural nation with the majority of its population residing in rural areas. The rural landscape is predominantly occupied by agricultural activities, including crop production and poultry farming by using of chaff cutter machines. The conventional cutter machines are unsafe design resulted in severe injuries and needed more workforces. Taking into consideration the limitations of the current conventional cutter machine, this project has been undertaken to develop and manufacture a chaff cutter machine, aiming to mitigate the potential for serious injuries and enhance operational efficiency. First of all, the work of design of the chaff cutter machine will be developed and analyzed. The new chaff cutter machine will be tried out for cutting various types of animal feed like dry straw, grass, corn straw, wheat stalk, etc. We'll also check how cost-effective the new machines are compared to the old-style ones and newer models. This paper talks about how we made and tested a chaff cutter machine in India. We'll also look at how much it costs to use the new chaff cutting machine compared to the old ones.

Gli stili APA, Harvard, Vancouver, ISO e altri

9

B, Susila, Balaji V, Dheenadhayalan R, Velan K e Jaswanth K.A. "Design and Fabrication of Groundnut Separating Machine". Bonfring International Journal of Industrial Engineering and Management Science 8, n. 2 (30 aprile 2018): 10–11. http://dx.doi.org/10.9756/bijiems.8364.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Irani, S. A., P. H. Cohen e T. M. Cavalier. "Design of Cellular Manufacturing Systems". Journal of Engineering for Industry 114, n. 3 (1 agosto 1992): 352–61. http://dx.doi.org/10.1115/1.2899803.

Testo completo

Abstract (sommario):

This paper describes a method for layout design of a Cellular Manufacturing System (CMS) that would allow simultaneously, the grouping of machines unique to a part family into cells and those shared by several cells to be located together in functional sections. Using an illustrative example, this integration of the flexibility of a functional layout, the reduced handling gained from cell formation and allowance of limited intercell flows among adjacent cells is described. Thereby, the traditional strategy of simultaneous formation of part families and distribution of machines into independent cells which creates machine distribution and unbalanced utilization problems is avoided. This is justified by an analysis of the complex interactions between the critical subproblems in cell formation—machine grouping, part family formation, distribution and utilization of shared machines, intracell layout, intercell (or shop) layout and material handling. This approach represents a new direction in cell formation where, by allowing the handling function to limit the extent of machine duplication between adjacent cells, a new graph theoretic structure for simultaneous machine grouping and layout design was developed and validated.

Gli stili APA, Harvard, Vancouver, ISO e altri

11

Picasso, E., e G. Plass. "The Machine Design". Europhysics News 20, n. 6 (1989): 80–91. http://dx.doi.org/10.1051/epn/19892006080.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

12

Zhang, Changjun. "Machine-learning design". Nature Energy 3, n. 7 (luglio 2018): 535. http://dx.doi.org/10.1038/s41560-018-0210-4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

13

Moorefield, Donnie. "Precision machine design". Precision Engineering 15, n. 1 (gennaio 1993): 51–52. http://dx.doi.org/10.1016/0141-6359(93)90288-l.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

14

Andriani, Tuti, e Pristiwanto. "Transducer Function In Vending Machine Simulation Design". Instal : Jurnal Komputer 11, n. 01 (6 febbraio 2019): 26–34. http://dx.doi.org/10.54209/jurnalkomputer.v11i01.5.

Testo completo

Abstract (sommario):

A vending machine is a substitute for a cashier or admin in the form of a machine so that buyers simply enter coins and the machine will issue them according to the request. Moore machine and mealy machines as a process for processing buyer orders which are translated into machine orders. Based on the test results of coins entered 1000 and 500, the drink can be chosen according to the price of the drink.

Gli stili APA, Harvard, Vancouver, ISO e altri

15

Mekid, Samir. "Micro Machining Issues: Design and Machining Process". Advanced Materials Research 739 (agosto 2013): 238–44. http://dx.doi.org/10.4028/www.scientific.net/amr.739.238.

Testo completo

Abstract (sommario):

Numerical controlled high speed micromachining on desktop machines is known to induce inherently new types of errors and machining issues at micro scale. The sources of these errors are either not known, or difficult to be modeled. Some of these errors are due to the downscaling effect of machine elements to a small micro-machine. This paper attempts to explore key issues proper to micro machines that are different from standard scale NC machine tools. Experimental observations are shown to support the discussion. The knowledge gained from these phenomena is used to nurture the design methodologies of micro-scale machines, to plan a suitable tool path and hence to improve the micromachining quality. This will also ascertain the statement that direct downscaling of current machine tools is worthless.

Gli stili APA, Harvard, Vancouver, ISO e altri

16

HOMANN, BRADLEY S., e ANNA C. THORNTON. "Precision machine design assistant: A constraint-based tool for the design and evaluation of precision machine tool concepts". Artificial Intelligence for Engineering Design, Analysis and Manufacturing 12, n. 5 (novembre 1998): 419–29. http://dx.doi.org/10.1017/s0890060498125027.

Testo completo

Abstract (sommario):

Precision machines are necessary to manufacture parts and subassemblies that require tight tolerances. During the design of precision machines, like any design, it is critical that the best concept is chosen in the early stages of the design process because 80% of the final cost and quality of a product are designed in at this phase. In addition, changes and optimization late in the design process have limited impact on cost and quality. Typically, during the design of precision machines, engineers and skilled machinists develop several machine concepts and down select based on heuristics and past design experience rather than quantitative measures. This paper describes a computation tool, Precision Machine Design Assistant (PMDA), which automates basic machine error simulation and concept evaluation. The tool uses a combination of machine error motion modelling and constraint-based design methods. By combining these methods in a computational environment, multiple machine concepts may be rapidly modeled, analyzed, and compared. The goal of the program is to assist the designer in the selection of a superior concept for detail design. The PMDA methods and implementation are demonstrated in an example.

Gli stili APA, Harvard, Vancouver, ISO e altri

17

Bekő, Balázs, e Ferenc Szigeti. "Design of a Glue Applying Machine". Műszaki Tudományos Közlemények 11, n. 1 (1 ottobre 2019): 35–38. http://dx.doi.org/10.33894/mtk-2019.11.05.

Testo completo

Abstract (sommario):

Abstract Glue applying machines allow the application of glue to a surface during production. The purpose of this work is to solve certain problems with the development of a new machine. In this paper, measurements and tests made before designing the new machine will be presented. The parts of the machine that that have been designed will also be presented as well as a simulation by finite element method conducted for a part of the machine’s support frame that has a critically dangerous cross-section.

Gli stili APA, Harvard, Vancouver, ISO e altri

18

Ismoyilov, F. B., M. H. Gapparova e I. J. Kuchkeldiev. "Determination of parameters of a trepanning machine for cleaning wool fibers". Современные инновации, системы и технологии - Modern Innovations, Systems and Technologies 2, n. 2 (23 giugno 2022): 0417–27. http://dx.doi.org/10.47813/2782-2818-2022-2-2-0417-04-27.

Testo completo

Abstract (sommario):

This article provides information about the technology of primary processing of wool and the feeding part of the baking machine. It analyzes the operating principle and types of baking machines at the enterprise of primary processing of wool. The disadvantages of baking machines affecting the product are considered. The principle of work and the design of new baking machines for the manufacture of quality products are proposed. The article provides information about the technology of primary processing of wool. Studied the mechanisms of machines for the production of wool and identified their design flaws. The designs and sizes of the pegs of the peg drum are analyzed. The designs of the loosening machines used in the loosening process were studied. The types and principles of baking machines working at the enterprises of primary processing of wool are analyzed. The technical characteristics of the machines are given. The negative aspects of the details of the mechanical impact on the product are noted. Defects of baking machines and their effect on the product are explained. The design and operational principle of a new spraying machine for the preparation of high-quality products is proposed. The proposed characteristics of the machine have high performance, structural design, impact on the product, low energy consumption, energy efficiency and effective loosening. In this machine, the optimal version of parts that have a positive effect on the natural characteristics of the product is selected. The designs of the loosening machines used in the loosening process were studied. The types and principles of baking machines working at the enterprises of primary processing of wool are analyzed. The technical characteristics of the machines are given. The negative aspects of the details of the mechanical impact on the product are noted. Defects of baking machines and their effect on the product are explained. The design and operational principle of a new spraying machine for the preparation of high-quality products is proposed. The proposed characteristics of the machine have high performance, structural design, impact on the product, low energy consumption, energy efficiency and effective loosening. In this machine, the optimal version of parts that have a positive effect on the natural characteristics of the product is selected.

Gli stili APA, Harvard, Vancouver, ISO e altri

19

She, Jinhua, Fajian Wu, Toshihiro Mita, Hiroshi Hashimoto, Min Wu e Abdullah M. Iliyasu. "Design of a New Lower-Limb Rehabilitation Machine". Journal of Advanced Computational Intelligence and Intelligent Informatics 21, n. 3 (19 maggio 2017): 409–16. http://dx.doi.org/10.20965/jaciii.2017.p0409.

Testo completo

Abstract (sommario):

Commercially available rehabilitation machines are bisymmetric, and the structure of the machines is fixed. Consequently, they cannot meet various requirements for lower-limb rehabilitation, and people have to adapt themselves to the machines to do exercises. To solve this problem, this paper presents a new kind of rehabilitation machine for the lower limbs. It is left-right asymmetric, and the structure and load of the machine can easily be adjusted to suit different requirements for lower limbs. A prototype of a half model of the machine for one leg is designed and built, and some results of preliminary tests are presented.

Gli stili APA, Harvard, Vancouver, ISO e altri

20

Oktaviandri, M., e D. K. A. V. Paramasivam. "Design and Fabrication of Customized Ais Kacang Vending Machine". Indonesian Journal of Computing, Engineering and Design (IJoCED) 2, n. 1 (3 aprile 2020): 24. http://dx.doi.org/10.35806/ijoced.v2i1.100.

Testo completo

Abstract (sommario):

Nowadays, machines play a critical role as those machines are broadly utilized in various subjects. The contribution of machines is swiftly growing day by day as they are starting to replace hu-mans in everyday tasks. The machine is also used for the food and beverage industry to deliver the products easily and conven-iently to customers. This paper focuses on the design and fabrica-tion of the customized Ais Kacang vending machine for canteen, cafeteria and restaurant usage. There were five designs made and one best conceptual design was selected by using a ranking method. In addition, this paper explains the stress and strain analyses of the internal frame of the vending machine. The Ais Kacang vending machine has been undergone two tests, the ge-ometrical and final product tests. The selected machine was able to produce a plate of Ais Kacang in 66 seconds using auto mode. However, the time needed to produce a plate of Ais Kacang in manual mode depended on the user.

Gli stili APA, Harvard, Vancouver, ISO e altri

21

Ruekkasaem, Lakkana, e Montalee Sasananan. "Optimal Parameter Design of Rice Milling Machine Using Design of Experiment". Materials Science Forum 911 (gennaio 2018): 107–11. http://dx.doi.org/10.4028/www.scientific.net/msf.911.107.

Testo completo

Abstract (sommario):

This study was aimed at finding appropriate levels of machine set up for small-sized rice milling machine in order to improve rice milling effectiveness. Small rice milling machines are used by farmers to reduce the reliance on commercial rice mill. However, they are found to produce greater quantities of broken rice grains than large-sized rice milling machine. This study investigated three factors of machine setup that would lead to smallest percentage of broken rice grains, i.e. size of hopper feed, gap adjuster, and outlet regulator. Each factor had three levels thus 3 x 3 factorial design was used to investigate the factors. It was found that all the three factors had significant impact on the number of broken grains. The optimum parameter settings that led to the smallest percentage of broken rice grains were as follows: size of hopper feed at 12 cm2, gap adjuster at 5 mm, and outlet regulator at 5 cm.

Gli stili APA, Harvard, Vancouver, ISO e altri

22

ASAI, Hidekatsu. "Good Design of Machine Tools : Role of Design in Machine Tools". Journal of the Society of Mechanical Engineers 115, n. 1119 (2012): 90–92. http://dx.doi.org/10.1299/jsmemag.115.1119_90.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

23

Mudin, Hatimi, Chicha Bagu e Fethma M. Nor. "Design of Modified Chicken Feather Retractor Machine". Journal of Applied Science, Engineering and Technology 1, n. 2 (31 dicembre 2021): 44. http://dx.doi.org/10.47355/aset.v1i2.17.

Testo completo

Abstract (sommario):

The demand for poultry products is seen increasing from year to year. This is a good thing for local chicken entrepreneurs. But the task of plucking chicken feathers is time-consuming and tiring. The production of machines to help simplify the process of removing chicken feathers is seen as a necessity for these small and medium industrial entrepreneurs. This is why we focus on producing chicken feather retractor machines (CFRM) that are capable of processing up to five chickens at once. This machine is portable and easy to move around and supported by four wheels that can be locked to ensure stability. This machine can perform effectively to remove feathers using friction concept between the chicken and the plucker fingers rubber which attached around the drum. The machine also environmentally friendly by filtering the feather from scattered everywhere and only allow water to come out. The result shows that this machine operates under the motor powered with 115.13 rpm with the rotating plate area is 0.166 m2 and drum volume of 0.158 m3. This machine managed to remove the feathers of up to five chickens within 30 seconds to 60 seconds

Gli stili APA, Harvard, Vancouver, ISO e altri

24

Cole, Joanne H., Henry W. Stoll e H. Van Dyke Parunak. "Machine intelligence in machine design: Workshop summary". Artificial Intelligence in Engineering 1, n. 1 (luglio 1986): 54–57. http://dx.doi.org/10.1016/0954-1810(86)90035-x.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

25

战, 思宇. "Structure Design of Automatic Adding Machine for Pastry Flavor Materials". Design 06, n. 04 (2021): 57–60. http://dx.doi.org/10.12677/design.2021.64010.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

26

王, 子佳. "Design of Five-Layer Blowing Machine Head Based on ANSYS". Design 08, n. 04 (2023): 3679–87. http://dx.doi.org/10.12677/design.2023.84454.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

27

张, 鸿莉. "Data-Based Interior Design: Practice and Application of Machine Learning". Design 09, n. 03 (2024): 1015–22. http://dx.doi.org/10.12677/design.2024.93412.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

28

B.G, Prof Patil. "Design and Fabrication of Double disk Lapping Machine for Gudgeon Pin". INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, n. 05 (21 maggio 2024): 1–5. http://dx.doi.org/10.55041/ijsrem34386.

Testo completo

Abstract (sommario):

An engineer is always focused towards challenges of bringing ideas and concepts to life. Therefore, sophisticated machines and modern techniques have to be constantly developed and implemented for economical manufacturing of products. Advanced researches approaches a topic of actuality in the machine manufacturing field, by combining the modern trends in the manufacturing processes (surfaces’ lapping) in processing some special materials (ceramics, composites) in conditions of minimum cost/ maximum quality, with modern technologies. Machine lapping is meant for economic lapping of batch qualities. In machine lapping, where high accuracy is demanded. Bonded abrasives in the form wheel are chosen for commercial lapping. Machine lapping can also employ abrasive paper or abrasive cloth as the lapping medium. New machines and techniques are being developed continuously to manufacture various products at cheaper rates and high quality. So, we are going to make a machine for Double Disc Lapping Machine and make it multipurpose & should be used as Micro Finishing machine is simple to maintain easy to operate. Hence, we tried our hands on “Double Disc Lapping Machine.” Lapping machine is one of the principal machines in industry. It is mainly used as the name indicates to micro polishing the material surfaces. Keywords: Micro Finishing, Lapping, both sides, low-cost machine

Gli stili APA, Harvard, Vancouver, ISO e altri

29

Lee, Sung-hyun, Noman Baloch e Byung-il Kwon. "Design and analysis of a double consequent pole changing vernier machine". International Journal of Applied Electromagnetics and Mechanics 64, n. 1-4 (10 dicembre 2020): 941–49. http://dx.doi.org/10.3233/jae-209408.

Testo completo

Abstract (sommario):

This paper proposes a double consequent pole changing vernier machine (DCPCVM) which adopts double consequent pole and flux modulation configuration. The proposed machine combines a vernier machine and a permanent magnet synchronous machine (PMSM) in a single topology. Therefore, the advantages of both machines can be realized in a single topology. The proposed machine provides high torque at low speed while operating in vernier mode whereas it operates in PMSM mode at high speed to avoid the disadvantages of vernier machines at high speeds such as high core losses. Parametric analysis of the proposed machine is performed to show the effect of the main variables on the electromagnetic characteristics of the machine. A finite element method (FEM) analysis is conducted, and meaningful conclusions are drawn.

Gli stili APA, Harvard, Vancouver, ISO e altri

30

阮, 筱柔. "Discussion on Service-Oriented Robots under New Human-Machine Relationships". Design 09, n. 03 (2024): 460–65. http://dx.doi.org/10.12677/design.2024.93341.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

31

Kalt, Svenja, Jonathan Erhard e Markus Lienkamp. "Electric Machine Design Tool for Permanent Magnet Synchronous Machines and Induction Machines". Machines 8, n. 1 (24 marzo 2020): 15. http://dx.doi.org/10.3390/machines8010015.

Testo completo

Abstract (sommario):

The rising mobility demand of today’s society leads to an increasing strain of noise and pollutant emissions on people and the environment. An increasing environmental awareness and the scarcity of fossil fuels are increasingly placing alternative-powered vehicles in the focus of politics, research and development. Electric vehicles represent a promising solution to this problem. The electric machine represents a design control lever for the optimization of the electric powertrain with regard to efficiency, power, weight and size. Therefore, accurate and realistic machine design tools for the design of electric machines are becoming increasingly important. In this paper, the authors present an electric machine design tool for electric machines using MATLAB® in order to enable an automated machine design. The electric machine design tool is published under an LGPL open source license.

Gli stili APA, Harvard, Vancouver, ISO e altri

32

Fan, Li Xian, Yong Zhao Xu e Hong Tao Li. "Design and Realization of Virtual Computer Cluster System". Advanced Materials Research 271-273 (luglio 2011): 1313–17. http://dx.doi.org/10.4028/www.scientific.net/amr.271-273.1313.

Testo completo

Abstract (sommario):

Virtualization technology has revolted the computer technology. In the paper, we present our virtual computer cluster. The components of computer cluster have been improved by virtualization technology from the actual computer server to virtual server instance. Virtual computer cluster includes front-end machine and the cluster nodes. The front-end machine can be physical machines or virtual machines; the cluster node can also be virtual or physical machine node. The front-end machine of the cluster communicates with the cluster nodes through physical or virtual network adapter. The front-end machine connects with the cluster management software in each node so as to monitor and control every physical or virtual node within the cluster. A single virtual computer cluster extends its resources with adding physical or virtual resources including computing resources, storage resources and etc. within secure and stabile occasions with special needs. The technology can be widely applied to cluster and parallel computing demand but with lower-cost system design scenarios.

Gli stili APA, Harvard, Vancouver, ISO e altri

33

Chen, Ke Ming. "Design on Framework for Dynamic Monitoring of Virtual Machines". Applied Mechanics and Materials 530-531 (febbraio 2014): 667–70. http://dx.doi.org/10.4028/www.scientific.net/amm.530-531.667.

Testo completo

Abstract (sommario):

In order to ensure that the cloud platform client runtime kernel virtual machine security, this paper proposes a new framework for dynamic monitoring of virtual machines, it is for the kernel rootkit attacks, study the cloud client virtual machine operating system kernel safety, presented Hyperchk virtual machine dynamic monitoring framework. This framework mainly for kernel rootkit attacks, ensure that customers running virtual machine kernel security.

Gli stili APA, Harvard, Vancouver, ISO e altri

34

Wu, Jing, Feng Zhi Zhao e Yu Dan Dong. "Design on Virtual Machine Frame of Cloud Computing Platform". Advanced Materials Research 834-836 (ottobre 2013): 1832–35. http://dx.doi.org/10.4028/www.scientific.net/amr.834-836.1832.

Testo completo

Abstract (sommario):

In the framework of the virtual machine can be well applied to cloud computing platforms such as multi-level security environment for guest virtual machines and communication between the fine-grained access control to prevent malicious software attacks and the spread between the guest virtual machine. This paper presents a set of virtual machines framework for assurance in the cloud computing software services in the guest virtual machines user-level application security.

Gli stili APA, Harvard, Vancouver, ISO e altri

35

Munang, Aswan, Dina Rachmawaty e Arif Reza Basirun. "Desain Mesin Pembuatan Gula Semut Berbahan Dasar Nira Kelapa Skala UMKM". Infotekmesin 14, n. 1 (26 gennaio 2023): 92–97. http://dx.doi.org/10.35970/infotekmesin.v14i1.1632.

Testo completo

Abstract (sommario):

Product development is a combination of technological trends that play a role in creating innovative works. Conceptual design is the initial phase of developing innovative product configurations. The processing of coconut sap into traditional palm sugar has constraints; the production process takes 4 to 6 hours and has a moisture content above 3%. The research objective was to obtain a machine design to increase production volume and reduce the water content in palm sugar. The machine design process begins with conducting interviews with 20 palm sugar craftsmen with approximately 5 years of experience to obtain information on priority needs. The VOC (Voice Of Customer) method can be used to determine priority designs and specifications. The results of the VOC process are (1) machine components made of food-grade materials, (2) production machines that are easy to operate and easy to maintain, (3) production machines with operational costs and affordable prices among MSMEs. The design development process has two alternative machines made using the Solidworks software. The results of the assessment of 30 SMEs’ palm sugar selected alternative two machine designs with dimensions of 70 x 60 x 155 cm. The advantage of the second engine design alternative is that it has a temperature sensor to adjust the gas valve and a pan with an insulator so that it can maintain temperature stability. The design of the palm sugar machine still requires innovation and development to increase production and quality.

Gli stili APA, Harvard, Vancouver, ISO e altri

36

R, Ashokkumar, Barathan S, Suresh R, Sivapriya S e Kavinkumar N. "Design and Fabrication of Paper Counting Machine". International Journal for Research in Applied Science and Engineering Technology 10, n. 4 (30 aprile 2022): 97–106. http://dx.doi.org/10.22214/ijraset.2022.41169.

Testo completo

Abstract (sommario):

Abstract: For counting of papers in academic institutions and industries, there are no feasible machines available. The design is mainly focused on cost effectiveness and for light to medium usages. The machine is constructed by using rollers, battery, DC motor, LED display, Arduino and IR sensor. In this machine initially we need to keep bunch of papers in the paper feeding tray, then the Arduino is reset. The LED displays the number of papers counted. The machine works based on IR sensor & colour detection. The machine is designed for counting the standard A4 size paper. The roller helps in separating each sheet from a bunch of sheets. Keywords: Arduino, Colour detection, IR sensor, Paper counting

Gli stili APA, Harvard, Vancouver, ISO e altri

37

Yu, Wei Li. "Design of 80000N·m Torsion Testing Machine". Applied Mechanics and Materials 607 (luglio 2014): 350–53. http://dx.doi.org/10.4028/www.scientific.net/amm.607.350.

Testo completo

Abstract (sommario):

The article introduce the mechanical structure and the principles of 80000 N·m torsion testing machine, the structure and the principles of checking power unit of this kind of testing machines and the control manner and the principles of the electronic control system, than expound the benefits of the equipment and its application.

Gli stili APA, Harvard, Vancouver, ISO e altri

38

Nasir Khan, Mohammad, Ambuj Maheshwari e Himanshu Verma. "Study and Design of Arduino Based CNC Laser Cutting Machine". IOP Conference Series: Materials Science and Engineering 1224, n. 1 (1 gennaio 2022): 012008. http://dx.doi.org/10.1088/1757-899x/1224/1/012008.

Testo completo

Abstract (sommario):

Abstract For precise job manufacturing, system should possess good dimensional accuracy and surface finish. In applications like drilling, punching, marking, boring, tapping work piece is positioned firstly and then cutting tool performs its action while motion axes are kept stationary. In traditional approach for such applications, manufacturer uses highly expensive CNC machine for programming job cycle and executing the same. Big scale manufacturer can afford such highly expensive machines but for small scale mechanical job manufacturing industry we have to think of low-cost solution that can deliver high class output. In this project we are trying to propose low-cost design which gives similar functionality as that of high-cost CNC machine. By applying this machine in industry, it can acquire the multi generation brief time. In order to perform some operation which requires continuous cutting over a pre-defined curve, CNC machines are used as the traditional machines in the industry. Installation of a CNC machine requires a high financial investment and a skilled labour to perform the different operations on the machine. Apart from that the maintenance cost of such machine are also high. In small scale industries where the operations are performed on small job pieces, the installation of such high-cost CNC machine is very difficult; hence this project work is taken up in which a low-cost CNC laser cutting machine is designed using the Arduino. This CNC laser cutting machine will be quite useful for small scale industries where the job size is not very large. Also, the machine does not require a highly skilled labour to perform operations.

Gli stili APA, Harvard, Vancouver, ISO e altri

39

Bae, Jae Il, Jae Wook Jung e Jun Seok Lee. "Study of Concept Design for Offshore Top Drive Machine". Transactions of the KSME C: Industrial Technology and Innovation 1, n. 1 (1 luglio 2013): 39–47. http://dx.doi.org/10.3795/ksme-c.2013.1.1.039.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

40

Singhal, Ankit Kumar, Mohit Kumar Singh Senger, Gunjan Agarwal e Kamal Kapoor. "Design and Fabrication of Material Separation Machine for Sustainable Development". International Journal of Materials Manufacturing and Sustainable Technologies 2, n. 1 (30 aprile 2023): 41–48. http://dx.doi.org/10.56896/ijmmst.2023.2.1.004.

Testo completo

Abstract (sommario):

In this research article, design and fabrication of material separation machine is discussed with the objective to decrease the time, money, and labor required to separate waste materials from one location to another, the design and manufacture of material separation machines are explored in this study. The fundamental concept was inspired by the development and application of artificial intelligence as well as the motion of robotic arms. The Material Separation machine's design places an emphasis on separating recyclable and usable waste from the accessible trash while using less energy and scientific approaches to separate the valuable material. The device is helpful for the efficient use of time and human labor, as well as for areas where a lack of manpower is a concern. Compared to other existing Material Separation machines, our machine utilizes cheap, readily available materials in the best way possible to produce an effective outcome in a predetermined amount of time.

Gli stili APA, Harvard, Vancouver, ISO e altri

41

Umeda, Yasushi, Tetsuo Tomiyama e Hiroyuki Yoshikawa. "A Design Methodology for Self-Maintenance Machines". Journal of Mechanical Design 117, n. 3 (1 settembre 1995): 355–62. http://dx.doi.org/10.1115/1.2826688.

Testo completo

Abstract (sommario):

This paper proposes a design methodology for self-maintenance machines. The self-maintenance machine is a machine that can maintain its functions for a while, even though faults happen. In order to achieve capabilities for diagnosing and repair planning, a model based approach that employs qualitative physics is proposed. Regarding repair execution, two types of repair strategies are proposed; viz., control type and functional redundancy type which is a strategy to add redundancy to a machine from a viewpoint of function. A prototype of the self-maintenance machine is developed. Because this machine uses the control type of repair strategy, it succeeded to maintain its functions as far as its structure does not change. A promising candidate for dealing with faults that involve structural changes is the functional redundancy type of repair.

Gli stili APA, Harvard, Vancouver, ISO e altri

42

Vaidya, Vivek, Ashwin Girhe, Chetan Lanjewar, Sarang Thakre, Shailendra Chavhan, Pushpak Vaidya e Snehal Humane. "Design of Manual Operated Oil Extraction Machine". International Journal for Research in Applied Science and Engineering Technology 10, n. 3 (31 marzo 2022): 1933–36. http://dx.doi.org/10.22214/ijraset.2022.40636.

Testo completo

Abstract (sommario):

Abstract: This paper aim on design and Development of pedal operated Seed oil extraction machine. The machine is portable which makes it light in weight and can be used for small scale industries and for Household and Pure oil extraction. Since this machine requires less space to move, it can be used in a more versatile manner as compared to heavy powered machines that are mounted on heavy and large industries. This machine can be efficient and easy to operate and maintain. The oil extracted has various applications in food, medicine, and industry (1). This paper is also aim on Literature Sur-vey on various mechanism used by top Universities professors According to the Need. Keywords: Expeller, Design, Chain, Speed, Seeds, Oil.

Gli stili APA, Harvard, Vancouver, ISO e altri

43

Cross, Nigel. "Can a Machine Design?" Design Issues 17, n. 4 (ottobre 2001): 44–50. http://dx.doi.org/10.1162/07479360152681083.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

44

Indrayani, Rina, Dewi Mulyasari Sumarta e Agus Rahmat Hermawanto. "Coffee Peeling Machine Design". Journal of Physics: Conference Series 1477 (marzo 2020): 052051. http://dx.doi.org/10.1088/1742-6596/1477/5/052051.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

45

Goldberg, M., e D. L. Powers. "A Machine-Tool Design". SIAM Review 34, n. 1 (marzo 1992): 114–17. http://dx.doi.org/10.1137/1034006.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

46

Pini, B. E., Yu V. Maksimov e A. V. Popov. "New Milling-Machine Design". Russian Engineering Research 38, n. 10 (ottobre 2018): 790–93. http://dx.doi.org/10.3103/s1068798x1810012x.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

47

Giannini, R., P. Lefèvre e D. Möhl. "SuperLEAR, conceptual machine design". Nuclear Physics A 558 (giugno 1993): 519–36. http://dx.doi.org/10.1016/0375-9474(93)90417-v.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

48

Starkey, John M. "Design of machine elements". Mechanism and Machine Theory 22, n. 4 (gennaio 1987): 399. http://dx.doi.org/10.1016/0094-114x(87)90030-9.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

49

Joko Santoso. "Yarn Winning Machine Design". Jurnal Ilmiah Multidisiplin Indonesia (JIM-ID) 2, n. 02 (12 giugno 2023): 38–41. http://dx.doi.org/10.58471/esaprom.v2i02.1421.

Testo completo

Abstract (sommario):

A mop is a very simple tool, but it is very much needed in society, especially to help with household work. In this final project the author tries to make a thread roller to process the manufacture of mops. The basic material for making mops is 0.85 cotton yarn and the waste material is clothing waste. The design of a tool with results that can support the need for the manufacture of basic materials in the production of mops, which is expected to be useful for the textile industry, which can meet market needs and can be used as a home industry so that it can improve people's living standards. In the design of the Yarn Winding Machine above, it can be produced: the diameter of the driving pulley is 100 mm and the diameter of the pulli being driven is 100 mm. The ratio of the pulli on the drive shaft to the pulli being driven is 1: 1, the main shaft of 19 mm can deliver 144 watts of power. These machines have a transmission system driven by an electric motor HP/1400 rpm/1 phase by using a large pulley of 210 mm with a small pully diameter of 45 mm. Belts used with L = 813 mm with a total of 2 pieces can connect a power of 144 watts.

Gli stili APA, Harvard, Vancouver, ISO e altri

50

Shan, Gen Li, Wen Xue Liu e Hong Bo Chen. "The Optimization Design of New Type F-Nail Nailing Machine". Advanced Materials Research 311-313 (agosto 2011): 1564–68. http://dx.doi.org/10.4028/www.scientific.net/amr.311-313.1564.

Testo completo

Abstract (sommario):

Welded structure is usually used in current nailing machines. When a nailing machine was used for a period of time, the base of the machine was deformed, so products produced with the machines become waste. The reason for these problems is that the design of window shape around the body column plate is unreasonable, so the plate often cracks. In addition, the hydraulic system in current nailing machines is unreasonable too, which makes production less efficient. Aiming the current problems of the nailing machine, finite element analysis software ANSYS is used to analysis and find the machine’s stress concentration areas. According to the analysis results, the shape and size of these areas are re-designed, which has the minimum area stress and deformation. The welded machine body is changed into a casted one, and the other modules are also re-build, all of which make the machine has longer service life. Through the process analysis, the hydraulic system is re-designed too, which improves the equipment productivity greatly.

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!