Accedi

Bibliografie tematiche / Loss surface / Articoli di riviste

Segui questo link per vedere altri tipi di pubblicazioni sul tema: Loss surface.

Articoli di riviste sul tema "Loss surface"

Autore: Grafiati

Pubblicato: 2 novembre 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Loss surface".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.

1

Qi Zhang, Qi Zhang, Chaohua Tan Chaohua Tan, Chao Hang Chao Hang e Guoxiang Huang Guoxiang Huang. "Low-loss Airy surface plasmon polaritons". Chinese Optics Letters 13, n. 8 (2015): 082401–82404. http://dx.doi.org/10.3788/col201513.082401.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Mäki, Markku, e Liisa Aine. "TOOTH SURFACE LOSS". Journal of the American Dental Association 143, n. 7 (luglio 2012): 730. http://dx.doi.org/10.14219/jada.archive.2012.0246.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Voitko, I. I., V. A. Denisovich, T. V. Kibalnik, O. A. Sopruk e R. V. Bondar. "Oxidized coal as a sorbent for softening water". Surface 13(28) (30 dicembre 2021): 188–96. http://dx.doi.org/10.15407/surface.2021.13.188.

Testo completo

Abstract (sommario):

Sorption tests carried out oxidized nitric acid active carbon in H+- and Na+- form in relation to cations Mg2+ and Ca2+ and mixture thereof. Values obtained statistical volumetric capacity samples and mass loss them during processing nitric acid, that is oxidation state. Discovered correlation between these data and relevant sorption volume samples. Demonstrated a possible water softening oxidized coal subject to specific solution acidity.

Gli stili APA, Harvard, Vancouver, ISO e altri

4

HOPSTER, H. "SPIN-POLARIZED ELECTRON ENERGY LOSS SPECTROSCOPY". Surface Review and Letters 01, n. 01 (giugno 1994): 89–96. http://dx.doi.org/10.1142/s0218625x94000114.

Testo completo

Abstract (sommario):

Spin-polarized electron energy loss spectroscopy (SPEELS) probes the spin-dependent electron-hole pair excitation spectrum at surfaces. It is a very surface sensitive method for the detection of surface magnetization. Indirectly, information on surface magnetic moments is obtained. SPEELS is capable of resolving layer-by-layer antiferromagnetic order as found in 3d metal (Cr, Mn, V) films on Fe(100).

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Savaş, Ahmet Fevzi, e Ceyda Kocabaş. "Reducing surface heat loss in steam boilers". Open Chemistry 20, n. 1 (1 gennaio 2022): 1458–66. http://dx.doi.org/10.1515/chem-2022-0241.

Testo completo

Abstract (sommario):

Abstract In this study, heat losses occurring on the outer surface of a steam boiler used in the distillation process in a textile company are discussed in detail. All surfaces of the boiler were scanned with a thermal camera to determine the non-insulated or poorly insulated areas. By drawing the schematic image of the boiler, the side surfaces, front cover, back cover, and parts of the smoke pipe were shown in different colors, and the temperature distributions in different parts of the boiler were revealed. Although most of the heat loss occurs on the side surfaces of the boiler, it was observed that these surfaces were already insulated. For this reason, a Pareto diagram was prepared according to the surface temperature to get an idea about where to start the improvement studies. Especially on the front and back cover surfaces, high-temperature values were measured and, it was determined that the heat loss on these surfaces was also at high levels. It was suggested that high-temperature surfaces should be covered with insulating jackets and pads, and sample applications were shown. The energy savings to be achieved and the payback period of the investment was revealed.

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Seo, J. M., D. S. Black, P. H. Holloway e J. E. Rowe. "Angular resolved surface‐plasmon loss from Si(111) surfaces". Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 6, n. 3 (maggio 1988): 1523–25. http://dx.doi.org/10.1116/1.575354.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

He, Jun, e F. D. Tappert. "High‐frequency surface bubble loss". Journal of the Acoustical Society of America 101, n. 5 (maggio 1997): 3196. http://dx.doi.org/10.1121/1.419213.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Tantbirojn, Daranee, Antheunis Versluis, Maria R. Pintado, Ralph Delong e Carol Dunn. "TOOTH SURFACE LOSS: Authors' response". Journal of the American Dental Association 143, n. 7 (luglio 2012): 730–32. http://dx.doi.org/10.14219/jada.archive.2012.0247.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Lambon, M. A. "Semantic Loss without Surface Dyslexia". Neurocase 1, n. 4 (1 dicembre 1995): 363–70. http://dx.doi.org/10.1093/neucas/1.4.363.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Lambon, M. A. "Semantic loss without surface dyslexia". Neurocase 1, n. 4 (1 dicembre 1995): 363a—370. http://dx.doi.org/10.1093/neucas/1.4.363-a.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

11

Kelleher, M., e K. Bishop. "Tooth surface loss: an overview". British Dental Journal 186, n. 2 (gennaio 1999): 61–66. http://dx.doi.org/10.1038/sj.bdj.4800020a2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

12

Davies, S. J., R. J. M. Gray e A. J. E. Qualtrough. "Management of tooth surface loss". British Dental Journal 192, n. 1 (gennaio 2002): 11–23. http://dx.doi.org/10.1038/sj.bdj.4801278.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

13

Lambon Ralph, Matthew A., Andrew W. Ellis e Sue Franklin. "Semantic loss without surface dyslexia". Neurocase 1, n. 4 (ottobre 1995): 363–69. http://dx.doi.org/10.1080/13554799508402380.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

14

Gernsbacher, Morton Ann. "Surface information loss in comprehension". Cognitive Psychology 17, n. 3 (luglio 1985): 324–63. http://dx.doi.org/10.1016/0010-0285(85)90012-x.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

15

Bazaliy, G., N. Oliinyk e G. Ilnytska. "The effect of modification diamond nanopowders detonation synthesis to change their electrokinetic and electrophysical characteristics". Surface 12(27) (30 dicembre 2020): 169–78. http://dx.doi.org/10.15407/surface.2020.12.169.

Testo completo

Abstract (sommario):

Development of methods for controlling the change in the functional cover and the energy composition of the surface of detonation synthesis diamond nanopowders is necessary to create stable suspensions and materials from them. The aim of this work is to study changes in the electrokinetic and electrophysical characteristics of the powder as a result of the modification of detonation synthesis diamond nanopowders using a liquid-phase thermochemical treatment. Diamond nanopowders of grades ASUD-75 - ASUD-99 with different sp2-hybridization carbon content, manufactured at the V.I. Bakul National Academy of Sciences of Ukraine from the product of detonation synthesis of diamond from the company "ALIT" (Zhytomyr) investigated. Diamond nanopowders of ASUD-90 grade after their modification by means of liquid-phase thermochemical treatment using: a melt of alkalis, a mixture of nitric and sulfuric acids, a mixture of chromic and sulfuric acids were investigated by electrophoresis using a device "Dzeta-potential-analizer" company "Mikromeritiks". Electrokinetic characteristics of diamond nanopowders: the magnitude and sign of the electrokinetic potential, electrophoretic mobility are determined. The methods were used to study the physicochemical characteristics of nanopowders: electrical resistivity, carbon content of sp2-hybridization, mass fraction of impurities in the form of an incombustible residue, and specific surface area. In this work, it was established by electrophoresis that the value of the electrokinetic potential and electrophoretic mobility of the powder decrease by 2-10 times with a decrease in the mass fraction of sp2-hybridization carbon from 23.6 to 0 wt%. Using the ASUD-90 nanopowder as an example, it is shown that the modification of the nanopowder by the liquid-phase method using thermochemical treatment with mixtures of oxidants leads to a decrease in the values of electrophoretic mobility by 1.1-7.5 times and electrokinetic potential by 1.1-7.3 times. It was found by dielectric measurement that the tangent of the dielectric loss angle of diamond nanopowders of grades ASUD-90 - ASUD-99 is in the range 0.3046 - 0.3146. Modification of the ASUD-90 grade nanopowder using a liquid-phase thermochemical treatment leads to a change in the interval of the dielectric loss tangent, namely 0.2450-0.3249. According to the degree of increase in the ratio of the dielectric loss tangent from 0% humidity to 100% humidity, the methods for modifying nanopowders can be arranged as follows: modifying using a melt of alkalis (ASUD-90-1 sample, S = 12.8%) <mixture of chromic and sulfuric acids (sample ASUD-90-3, S = 13.8%) <mixture of nitric and sulfuric acids (sample ASUD-90-2, S = 20.8 %).

Gli stili APA, Harvard, Vancouver, ISO e altri

16

Jin, J., X. Wang, Y. Han, Y. Cai, Y. Cai, H. Wang, L. Zhu, L. Xu, L. Zhao e Z. Li. "Combined beef thawing using response surface methodology". Czech Journal of Food Sciences 34, No. 6 (21 dicembre 2016): 547–53. http://dx.doi.org/10.17221/138/2016-cjfs.

Testo completo

Abstract (sommario):

Based on four thawing methods (still air, still water, ultrasonic wave, and microwave) and single-factor tests, we established a four-factor three-level response surface methodology for a regression model (four factors: pH, drip loss rate, cooking loss rate, protein content). The optimal combined thawing method for beef rib-eye is: microwave thawing (35 s work/10 s stop, totally 170 s) until beef surfaces soften, then air thawing at 15°C until the beef centre temperature reaches –8°C, and finally ultrasonic thawing at 220 W until the beef centre temperature rises to 0°C. With this method, the drip loss rate is 1.9003%, cooking loss rate is 33.3997%, and protein content is 229.603 μg, which are not significantly different from the model-predicted theoretical results (P ≥ 0.05).

Gli stili APA, Harvard, Vancouver, ISO e altri

17

Karpuz, Orhan, Muhammet Vefa AKPINAR, Hakan ASLAN, Muhammet ÇELİK e Elif ÇİÇEK. "Friction Loss of Concrete Pavement Surface". Journal of Innovative Engineering and Natural Science 2, n. 2 (2022): 66–75. http://dx.doi.org/10.29228/jiens.62559.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

18

Schaich, Tobias, Anas Al Rawi, Trevor Morsman e Mike Payne. "Dielectric-induced surface wave radiation loss". Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 476, n. 2236 (aprile 2020): 20190859. http://dx.doi.org/10.1098/rspa.2019.0859.

Testo completo

Abstract (sommario):

We investigate a model which shows how the introduction of a perturbing dielectric close to an electromagnetic surface wave leads to radiation away from the surface through the dielectric. This resembles a surface waveguide passing through a wall or being deployed underground. Our theory, which is based on the mode-matching technique, allows quantitative determination of losses from a bound surface wave mode up to the point of its complete extinction. For a surface wave supported by a coated, conducting sheet the attenuation due to the perturbing dielectric is calculated for a number of frequencies, permittivities of the perturbation and separations between the sheet and the perturbing dielectric. The accuracy of our results is verified by simulation of the system with a full-wave numerical solution. Finally, we report experimental data of perturbed surface waves on a cable, which are in qualitative agreement with our model.

Gli stili APA, Harvard, Vancouver, ISO e altri

19

Boozer, Allen H. "Magnetic surface loss and electron runaway". Plasma Physics and Controlled Fusion 61, n. 2 (7 gennaio 2019): 024002. http://dx.doi.org/10.1088/1361-6587/aaf293.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

20

Kim, Myung-Ki, Seung Hoon Lee, Muhan Choi, Byeong-Hyeon Ahn, Namkyoo Park, Yong-Hee Lee e Bumki Min. "Low-loss surface-plasmonic nanobeam cavities". Optics Express 18, n. 11 (11 maggio 2010): 11089. http://dx.doi.org/10.1364/oe.18.011089.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

21

Krištof, J., P. Macko e P. Veis. "Surface loss probability of atomic oxygen". Vacuum 86, n. 6 (gennaio 2012): 614–19. http://dx.doi.org/10.1016/j.vacuum.2011.07.041.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

22

Clark, Cathy Ann. "An algorithm to predict surface loss." Journal of the Acoustical Society of America 127, n. 3 (marzo 2010): 1963. http://dx.doi.org/10.1121/1.3385019.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

23

HODAEI, MOHAMMAD, e KAMBIZ FARHANG. "EFFECT OF ROUGH SURFACE ASYMMETRY ON CONTACT ENERGY LOSS IN HIP IMPLANTS". Journal of Mechanics in Medicine and Biology 17, n. 01 (febbraio 2017): 1750023. http://dx.doi.org/10.1142/s0219519417500233.

Testo completo

Abstract (sommario):

Rough surface height distribution can be nonsymmetric, depending on the process of surface preparation. The prevalent processes for implant surface involve turning and milling, both resulting in surface height distributions of nonsymmetric nature. Asymmetry in a surface height distribution is manifested through a parameter known as skewness. Unlike Gaussian distribution, Weibull distribution permits characteristics such as skewness and kurtosis in data to be included in the mathematical description of a height distribution. This paper develops hip implant contact model based on Weibull distribution of surface heights. The elastic–plastic interaction of implant surfaces are considered as macroscopically spherical surfaces containing micron-scale roughness. Symmetric and asymmetric roughness height distribution are compared. The total contact force is related to the minimum mean surface separation of the contacting rough surfaces. The force is obtained using statistical integral function of the asperity heights over the possible region of interaction of the roughness of surfaces. Approximate equations are obtained that relate the contact force to the minimum mean surface separation explicitly. The approximate equations are used to derive hysteretic energy loss per load–unload sequence, contact frequency, and damping. It is shown that energy loss per cycle, contact frequency, and damping are lower for asymmetric surface roughness distribution.

Gli stili APA, Harvard, Vancouver, ISO e altri

24

Vecchiotti, Andrea, Teresa J. Ryan, Joseph Vignola e Diego Turo. "Modeling sea state induced atmospheric sound transmission loss". Journal of the Acoustical Society of America 153, n. 3_supplement (1 marzo 2023): A328. http://dx.doi.org/10.1121/10.0019025.

Testo completo

Abstract (sommario):

This work presents a numerical study on atmospheric sound propagation over rough rigid surfaces. The intent is to simulate acoustic propagation over water. Methods to estimate sea state induced atmospheric sound transmission loss and relative uncertainties are evaluated. In previous studies, a flat surface with an equivalent impedance was used to account for the effect of surface roughness on sound transmission loss. Equivalent impedances were estimated based on time-domain numerical simulations of atmospheric sound propagation above pseudorandom sea surfaces coherent with a Pierson-Moskowitz spectra. Estimation of equivalent impedances using time- and frequency- domain approaches are compared for cases up to sea state 4. Acoustic excess attenuation due to propagation over a rough surface was predicted by the authors, in a previous work, by correcting the excess attenuation of a propagation over a flat, perfectly reflecting surface. The correction factor was frequency and sea state dependent and included an additional term to account for the uncertainties characteristic of different sea states. Excess attenuation predictions estimated using the equivalent impedance approach are compared with those obtained from the authors’ previous study. Implications of the use of these methods for source detectability determinations are discussed.

Gli stili APA, Harvard, Vancouver, ISO e altri

25

Messal, O., A.-T. Vo, M. Fassenet, P. Mas, S. Buffat e A. Kedous-Lebouc. "Advanced approach for static part of loss-surface iron loss model". Journal of Magnetism and Magnetic Materials 502 (maggio 2020): 166401. http://dx.doi.org/10.1016/j.jmmm.2020.166401.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

26

Swetaa A, Revathi Duraisamy e Jessy P. "Reason for tooth material loss among FMR patients - A retrospective study". International Journal of Research in Pharmaceutical Sciences 11, SPL3 (31 ottobre 2020): 1855–60. http://dx.doi.org/10.26452/ijrps.v11ispl3.3555.

Testo completo

Abstract (sommario):

Tooth wear is a general term describing the loss of dental hard tissues, from the surface of the teeth caused by factors other than dental caries, trauma and developmental disorders. Attrition, Abrasion and erosion usually cause alterations of the tooth surfaces and manifest as tooth wear. Tooth surface loss may be considered physiological or pathological. Physiological tooth surface loss occurs as a result of mastication and adjustment, which is required for the teeth to function correctly. Physiological tooth surface loss may also occur at interproximal tooth surfaces due to friction between the adjacent teeth. Inversely, pathological tooth surface loss represents unacceptable levels of dental hard tissue loss. It is characterized by abnormal destruction, which may require treatment. The aim was to assess the reason for tooth material loss among FMR diagnosis patients. A retrospective study sample of 65 cases was collected from DIAS(Dental Information Archiving Software). The data was converted into an excel sheet for tabulation and further statistical analysis were done in SPSS. The p-value was insignificant and the current study proves that the reason for tooth material loss is predominantly caused by attrition. Within the limits of the study, the reason for tooth material loss is due to attrition.

Gli stili APA, Harvard, Vancouver, ISO e altri

27

Engelbrecht, Andries, e Robert Gouldie . "Fitness Landscape Analysis of Product Unit Neural Networks". Algorithms 17, n. 6 (4 giugno 2024): 241. http://dx.doi.org/10.3390/a17060241.

Testo completo

Abstract (sommario):

A fitness landscape analysis of the loss surfaces produced by product unit neural networks is performed in order to gain a better understanding of the impact of product units on the characteristics of the loss surfaces. The loss surface characteristics of product unit neural networks are then compared to the characteristics of loss surfaces produced by neural networks that make use of summation units. The failure of certain optimization algorithms in training product neural networks is explained through trends observed between loss surface characteristics and optimization algorithm performance. The paper shows that the loss surfaces of product unit neural networks have extremely large gradients with many deep ravines and valleys, which explains why gradient-based optimization algorithms fail at training these neural networks.

Gli stili APA, Harvard, Vancouver, ISO e altri

28

Yang, Jinling, Takahito Ono e Masayoshi Esashi. "Investigating surface stress: Surface loss in ultrathin single-crystal silicon cantilevers". Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures 19, n. 2 (2001): 551. http://dx.doi.org/10.1116/1.1347040.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

29

Choi, Y. S., J. J. Kim e S. Miyajima. "Diffusive loss of surface adatoms and surface enhanced Raman scattering intensity". Chemical Physics Letters 255, n. 1-3 (giugno 1996): 45–48. http://dx.doi.org/10.1016/0009-2614(96)00345-4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

30

Bancroft, Randy. "Microstrip Antenna Efficiency and Surface Wave Loss". IEEE Transactions on Antennas and Propagation 69, n. 8 (agosto 2021): 5032–35. http://dx.doi.org/10.1109/tap.2021.3060116.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

31

Smith, E., R. Gordon, C. Bourque, A. Campbell, S. Génermont, P. Rochette e M. Mkhabela. "Simulating ammonia loss from surface applied manure". Canadian Journal of Soil Science 89, n. 3 (2 maggio 2009): 357–67. http://dx.doi.org/10.4141/cjss08047.

Testo completo

Abstract (sommario):

The land spreading of manure can result in significant nitrogen (N) losses to the atmosphere through ammonia (NH3) volatilization. It is estimated that agricultural activities, including manure spreading contribute approximately 50% of the total global NH3 emissions. Computer simulation models have been developed in an attempt to predict NH3 losses resulting from manure spreading. Few models have been validated with success and no validation has been completed for conditions found in eastern Canada. The mechanistic model Volt’Air was implemented and tested to estimate NH3 emissions using field-based wind tunnel data from three field locations in eastern Canada. The model was validated using data from 27 wind tunnel trials, which measured NH3 loss over 5-19 d. Sensitivity analysis revealed that Volt’Air was most sensitive to pH. Good overall agreement was observed between measured results and model simulations over 5-19 d (R2 = 0.91, RMSE = 2.9 kg ha-1). Short-term flux simulations (kg ha-1 h-1) within the first 24 h after spreading were underestimated by 29.5% and fluxes on subsequent days were slightly underestimated by 3.7%. Error with Volt’Air appears to be largely confined to the first day following manure application. Volt’Air offers potential for predicting NH3 losses (i.e., 5-19 d) from manure application within eastern Canada. Improving the simulation of short-term pH changes, however, may result in enhanced overall model performance.Key words: Ammonia volatilization, flux, mechanistic model, swine manure, wind tunnels

Gli stili APA, Harvard, Vancouver, ISO e altri

32

A. Algadhi, Abdulaziz. "Tooth Surface Loss: Definitions, Prevention and Diagnosis". Saudi Journal of Oral and Dental Research 6, n. 3 (16 marzo 2021): 129–33. http://dx.doi.org/10.36348/sjodr.2021.v06i03.005.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

33

Mahmood, Kazam, e Asim Mahmood. "A student guide to tooth surface loss". BDJ Student 29, n. 1 (31 gennaio 2022): 40–43. http://dx.doi.org/10.1038/s41406-021-0269-4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

34

Borselli, M., T. J. Johnson, C. P. Michael, M. D. Henry e O. Painter. "Surface encapsulation for low-loss silicon photonics". Applied Physics Letters 91, n. 13 (24 settembre 2007): 131117. http://dx.doi.org/10.1063/1.2793820.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

35

Warreth, Abdulhadi, Eyas Abuhijleh, Mohammad Adel Almaghribi, Ghanim Mahwal e Ali Ashawish. "Tooth surface loss: A review of literature". Saudi Dental Journal 32, n. 2 (febbraio 2020): 53–60. http://dx.doi.org/10.1016/j.sdentj.2019.09.004.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

36

Mu, Jian-Wei, e Wei-Ping Huang. "A Low-Loss Surface Plasmonic Bragg Grating". Journal of Lightwave Technology 27, n. 4 (febbraio 2009): 436–39. http://dx.doi.org/10.1109/jlt.2008.928961.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

37

Konečná, Andrea, Tomáš Neuman, Javier Aizpurua e Rainer Hillenbrand. "Surface-Enhanced Molecular Electron Energy Loss Spectroscopy". ACS Nano 12, n. 5 (11 aprile 2018): 4775–86. http://dx.doi.org/10.1021/acsnano.8b01481.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

38

Zavesky, Richard R., e Alvin S. Goodman. "WATER-SURFACE PROFILES WITHOUT ENERGY LOSS COEFFICIENTS". Journal of the American Water Resources Association 24, n. 6 (dicembre 1988): 1281–87. http://dx.doi.org/10.1111/j.1752-1688.1988.tb03048.x.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

39

Jasinski, Joseph M. "Surface loss coefficients for the silyl radical". Journal of Physical Chemistry 97, n. 29 (luglio 1993): 7385–87. http://dx.doi.org/10.1021/j100131a002.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

40

Ramin, D., B. Weidenfeller e W. Riehemann. "Loss improvement in Finemet by surface modification". Materials Science and Engineering: A 226-228 (giugno 1997): 590–93. http://dx.doi.org/10.1016/s0921-5093(96)10692-4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

41

Libo, Zhou, Zou Han, Ji Chongping, Wang Wei e Jian Yongxiao. "The Scandinavia ozone loss and surface heating". Advances in Atmospheric Sciences 18, n. 3 (maggio 2001): 454–66. http://dx.doi.org/10.1007/bf02919324.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

42

Al-Ateeqi, Hadeel. "Tooth Surface Loss due to Dental Erosion". Dental News 19, n. 1 (marzo 2013): 18–21. http://dx.doi.org/10.12816/0003005.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

43

Almog, Y. "The loss of stability of surface superconductivity". Journal of Mathematical Physics 45, n. 7 (luglio 2004): 2815–32. http://dx.doi.org/10.1063/1.1755859.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

44

Juaristi, J. I., e F. J. García de Abajo. "Energy loss in grazing proton-surface collisions". Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 90, n. 1-4 (maggio 1994): 252–56. http://dx.doi.org/10.1016/0168-583x(94)95550-6.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

45

Xie, Yong Gang, e Dong Ya Shen. "Simulation Studies in Body Surface to Body Surface Channel Models". Applied Mechanics and Materials 556-562 (maggio 2014): 4689–92. http://dx.doi.org/10.4028/www.scientific.net/amm.556-562.4689.

Testo completo

Abstract (sommario):

The study of the characteristics of WBAN channel model is crucial, due to the fact that it is an important step to design wireless body area network (WBAN). WBAN channel models are so different from the traditional mobile channel models and there are few publications on them. In this paper, we studied the statistic characteristics of the WBAN channel based on the IEEE 802.15.6 models. We focus on body surface to body surface circumstance, simulated the path loss models on 400, 600 and 800MHz and studied the statistic characteristics of the path loss models. Finally, we used the Guass model to fit the statistic results of the path loss and obtained coefficients of Gauss model .

Gli stili APA, Harvard, Vancouver, ISO e altri

46

Hopf, C., T. Schwarz-Selinger, W. Jacob e A. von Keudell. "Surface loss probabilities of hydrocarbon radicals on amorphous hydrogenated carbon film surfaces". Journal of Applied Physics 87, n. 6 (15 marzo 2000): 2719–25. http://dx.doi.org/10.1063/1.372246.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

47

Mondio, G., F. Neri, M. Stöcker, T. Janssens, G. R. Castro e K. Wandelt. "Surface chemical sensitivity of reflection electron energy loss spectra from metal surfaces". Surface Science Letters 251-252 (luglio 1991): A322. http://dx.doi.org/10.1016/0167-2584(91)90863-m.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

48

Mondio, G., F. Neri, M. Stöcker, T. Janssens, G. R. Castro e K. Wandelt. "Surface chemical sensitivity of reflection electron energy loss spectra from metal surfaces". Surface Science 251-252 (luglio 1991): 243–47. http://dx.doi.org/10.1016/0039-6028(91)90990-a.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

49

Koodaryan, Roodabeh, e Ali Hafezeqoran. "Evaluation of Implant Collar Surfaces for Marginal Bone Loss: A Systematic Review and Meta-Analysis". BioMed Research International 2016 (2016): 1–10. http://dx.doi.org/10.1155/2016/4987526.

Testo completo

Abstract (sommario):

Background. It is important to understand the influence of different collar designs on peri-implant marginal bone loss, especially in the critical area.Objectives. The purpose of the present systematic review and meta-analysis was to compare dental implants with different collar surfaces, evaluating marginal bone loss and survival rates of implants.Methods. Eligibility criteria included clinical human studies, randomized controlled trials, and prospective and retrospective studies, which evaluated dental implants with different collar surface in the same study.Results. Twelve articles were included, with a total of 492 machined, 319 rough-surfaced, and 352 rough-surfaced microthreaded neck implants. There was less marginal bone loss at implants with rough-surfaced and rough-surfaced microthreaded neck than at machined-neck implants (difference in means: 0.321, 95% CI: 0.149 to 0.493;p<0.01).Conclusion. Rough and rough-surfaced microthreaded implants are considered a predictable treatment for preserving early marginal bone loss.

Gli stili APA, Harvard, Vancouver, ISO e altri

50

Shimokawa, CAK, M. Giannini, CB André, BO Sahadi, JJ Faraoni, RG Palma-Dibb, CJ Soares e RB Price. "In Vitro Evaluation of Surface Properties and Wear Resistance of Conventional and Bulk-fill Resin-based Composites After Brushing With a Dentifrice". Operative Dentistry 44, n. 6 (1 novembre 2019): 637–47. http://dx.doi.org/10.2341/18-200-l.

Testo completo

Abstract (sommario):

SUMMARY Objectives: This study evaluated the effect of toothbrushing with a dentifrice on gloss, roughness profile, surface roughness, and wear of conventional and bulk-fill resin-based composites. Methods and Materials: Gloss and surface roughness of resin-based composites (RBCs; Admira Fusion X-tra, Aura Bulk Fill, Filtek Bulk Fill Flowable, Filtek Bulk Fill Posterior Restorative, Filtek Supreme Ultra, Herculite Ultra, Mosaic Enamel, SDR flow+, Sonic Fill 2, Tetric EvoFlow Bulk Fill and Tetric EvoCeram Bulk Fill) were analyzed before and after brushing; the roughness profile and wear were also determined after toothbrushing. Representative three-dimensional images of the surface loss and images comparing the unbrushed and brushed surfaces were also compared. Analysis of variance and Tukey post hoc tests were applied (α=0.05) to the gloss, surface roughness, roughness profile, and surface loss data. Pearson's correlation test was used to determine the correlation between gloss and surface roughness, surface loss and percentage of gloss decrease after brushing, and surface loss and surface roughness after brushing. Results: For all RBCs tested after 20,000 brushing cycles, the gloss was reduced and the surface roughness increased (p<0.05). However, the roughness profile and the amount of surface loss were dependent on the RBC brand. Admira Fusion X-tra, Aura, Tetric EvoCeram Bulk Fill, and Tetric EvoFlow Bulk Fill showed the deepest areas of wear (p<0.05). A significant negative correlation was found between gloss and surface roughness, and a weak correlation was found between the decrease in gloss and the extent of surface loss, and any increase in surface roughness and the surface loss. Conclusions: Toothbrushing with a dentifrice reduced the gloss, increased the surface roughness, and caused loss at the surface of all the RBCs tested. Considering all the properties tested, Mosaic Enamel exhibited excellent gloss retention and a low roughness profile and wear, while Admira Fusion X-tra exhibited the greatest decrease in gloss, the highest roughness profile, and the most wear.

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!