Articoli di riviste sul tema "Local solidification conditions"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Local solidification conditions".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.
Sobolev, S. L. "Rapid solidification under local nonequilibrium conditions". Physical Review E 55, n. 6 (1 giugno 1997): 6845–54. http://dx.doi.org/10.1103/physreve.55.6845.
Sobolev, S. L. "Driving force for binary alloy solidification under far from local equilibrium conditions". Acta Materialia 93 (luglio 2015): 256–63. http://dx.doi.org/10.1016/j.actamat.2015.04.028.
Domeij, Björn, e Attila Diószegi. "Solidification Chronology of the Metal Matrix and a Study of Conditions for Micropore Formation in Cast Irons Using EPMA and FTA". Materials Science Forum 925 (giugno 2018): 436–43. http://dx.doi.org/10.4028/www.scientific.net/msf.925.436.
Sobolev, Sergey L., Mikhail G. Tokmachev e Yuri R. Kolobov. "Rapid Multicomponent Alloy Solidification with Allowance for the Local Nonequilibrium and Cross-Diffusion Effects". Materials 16, n. 4 (15 febbraio 2023): 1622. http://dx.doi.org/10.3390/ma16041622.
Plotkowski, A., K. Fezi e M. J. M. Krane. "Estimation of transient heat transfer and fluid flow for alloy solidification in a rectangular cavity with an isothermal sidewall". Journal of Fluid Mechanics 779 (14 agosto 2015): 53–86. http://dx.doi.org/10.1017/jfm.2015.424.
Gotterbarm, Martin R., Alexander M. Rausch e Carolin Körner. "Fabrication of Single Crystals through a µ-Helix Grain Selection Process during Electron Beam Metal Additive Manufacturing". Metals 10, n. 3 (28 febbraio 2020): 313. http://dx.doi.org/10.3390/met10030313.
Merchant, G. J., e S. H. Davis. "Kinetic Effects in Directional Solidification". Applied Mechanics Reviews 43, n. 5S (1 maggio 1990): S76—S78. http://dx.doi.org/10.1115/1.3120855.
Zimmermann, Gerhard, Viktor T. Vitusevych e Laszlo Sturz. "Microstructure Formation in AlSi6Cu4 Alloy with Forced Melt Flow Induced by a Rotating Magnetic Field". Materials Science Forum 649 (maggio 2010): 249–54. http://dx.doi.org/10.4028/www.scientific.net/msf.649.249.
Heckmann, C. J., W. Stets e G. Wolf. "Plate Fracture of Nodular Cast Iron". Key Engineering Materials 457 (dicembre 2010): 367–73. http://dx.doi.org/10.4028/www.scientific.net/kem.457.367.
Huo, Miao, Chuyue Chen, Hangyue Jian, Wenchao Yang e Lin Liu. "The Stray Grains from Fragments in the Rejoined Platforms of Ni-Based Single-Crystal Superalloy". Metals 13, n. 8 (15 agosto 2023): 1470. http://dx.doi.org/10.3390/met13081470.
Rittinghaus, Silja-Katharina, e Jonas Zielinski. "Influence of Process Conditions on the Local Solidification and Microstructure During Laser Metal Deposition of an Intermetallic TiAl Alloy (GE4822)". Metallurgical and Materials Transactions A 52, n. 3 (4 febbraio 2021): 1106–16. http://dx.doi.org/10.1007/s11661-021-06139-2.
PLOTKOWSKI, ALEX. "Geometry-Dependent Solidification Regimes in Metal Additive Manufacturing". Welding Journal 99, n. 2 (1 febbraio 2020): 59s—66s. http://dx.doi.org/10.29391/2020.99.006.
Cenni, Riccardo, Matteo Cova e Giacomo Bertuzzi. "A methodology to consider local material properties in structural optimization". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231, n. 15 (29 marzo 2016): 2822–34. http://dx.doi.org/10.1177/0954406216640807.
Basu, I., J. T. Wood e Jonathan P. Weiler. "Effect of Process Variables on Microstructural Features during Solidification of AM60B Magnesium Alloy". Materials Science Forum 706-709 (gennaio 2012): 1279–84. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.1279.
Rodrigues, Christian M. G., Menghuai Wu, Haijie Zhang, Andreas Ludwig e Abdellah Kharicha. "Bridging Capillary-Driven Fragmentation and Grain Transport with Mixed Columnar-Equiaxed Solidification". Metallurgical and Materials Transactions A 52, n. 10 (12 agosto 2021): 4609–22. http://dx.doi.org/10.1007/s11661-021-06414-2.
Roósz, András, Arnold Rónaföldi, Yuze Li, Nathalie Mangelinck-Noël, Gerhard Zimmermann, Henri Nguyen-Thi, Mária Svéda e Zsolt Veres. "Microstructure Analysis of Al-7 wt% Si Alloy Solidified on Earth Compared to Similar Experiments in Microgravity". Crystals 12, n. 9 (31 agosto 2022): 1226. http://dx.doi.org/10.3390/cryst12091226.
Atkinson, Helen V., Faraj Alshmri, S. V. Hainsworth e S. D. A. Lawes. "Microstructural Characterization of Rapidly Solidified Al-High Si Alloys". Advanced Materials Research 328-330 (settembre 2011): 1545–51. http://dx.doi.org/10.4028/www.scientific.net/amr.328-330.1545.
Hagenlocher, Christian, Patrick O’Toole, Wei Xu, Milan Brandt, Mark Easton e Andrey Molotnikov. "The Effect of Heat Accumulation on the Local Grain Structure in Laser-Directed Energy Deposition of Aluminium". Metals 12, n. 10 (25 settembre 2022): 1601. http://dx.doi.org/10.3390/met12101601.
Rohatgi, P. K., K. Pasciak, C. S. Narendranath, S. Ray e A. Sachdev. "Evolution of microstructure and local thermal conditions during directional solidification of A356-SiC particle composites". Journal of Materials Science 29, n. 20 (1994): 5357–66. http://dx.doi.org/10.1007/bf01171548.
Tiedje, Niels S., Mathias K. Bjerre, Mohammed A. Azeem, Jesper H. Hattel e Peter D. Lee. "Analysis of Local Conditions on Graphite Growth and Shape During Solidification of Ductile Cast Iron". Transactions of the Indian Institute of Metals 71, n. 11 (28 ottobre 2018): 2699–705. http://dx.doi.org/10.1007/s12666-018-1448-z.
Zhou, B., M. Apel, J. Eiken, R. Berger, S. Gor e N. Wolff. "Influence of cooling path on solidification morphology and hot tearing susceptibility of an Al−Cu−Fe−Mg−Si alloy". Materialwissenschaft und Werkstofftechnik 55, n. 1 (gennaio 2024): 53–61. http://dx.doi.org/10.1002/mawe.202300167.
Drezet, Jean Marie, e Sélim Mokadem. "Marangoni Convection and Fragmentation in LASER Treatment". Materials Science Forum 508 (marzo 2006): 257–62. http://dx.doi.org/10.4028/www.scientific.net/msf.508.257.
Schaar, Helge, Ingo Steinbach e Marvin Tegeler. "Numerical Study of Epitaxial Growth after Partial Remelting during Selective Electron Beam Melting in the Context of Ni–Al". Metals 11, n. 12 (13 dicembre 2021): 2012. http://dx.doi.org/10.3390/met11122012.
Bondareva, Nadezhda S., e Mikhail A. Sheremet. "Numerical Simulation of Melting of Phase Change Material in a Square Cavity with a Heat Source". Key Engineering Materials 685 (febbraio 2016): 104–8. http://dx.doi.org/10.4028/www.scientific.net/kem.685.104.
Mochnacki, Bohdan, e Ewa Majchrzak. "Numerical Modeling of Casting Solidification Using Generalized Finite Difference Method". Materials Science Forum 638-642 (gennaio 2010): 2676–81. http://dx.doi.org/10.4028/www.scientific.net/msf.638-642.2676.
Rausch, Alexander M., Martin R. Gotterbarm, Julian Pistor, Matthias Markl e Carolin Körner. "New Grain Formation by Constitutional Undercooling Due to Remelting of Segregated Microstructures during Powder Bed Fusion". Materials 13, n. 23 (3 dicembre 2020): 5517. http://dx.doi.org/10.3390/ma13235517.
Klinkhammer, J., J. Thorborg, M. Bernhard, J. Winkler, C. Bernhard, R. Hanus e G. Tischler. "Hot tear prediction in large sized high alloyed turbine steel parts - experimental based calibration of mechanical data and model validation". IOP Conference Series: Materials Science and Engineering 1281, n. 1 (1 maggio 2023): 012068. http://dx.doi.org/10.1088/1757-899x/1281/1/012068.
Khaimovich, Alexander, Igor Shishkovsky, Yaroslav Erisov, Anton Agapovichev, Vitaliy Smelov e Vasilii Razzhivin. "Research on Cracked Conditions in Nickel Chrome Alloy Ni50Cr33W4.5Mo2.8TiAlNb, Obtained by Direct Laser Deposition". Metals 12, n. 11 (7 novembre 2022): 1902. http://dx.doi.org/10.3390/met12111902.
Skrzypczak, T., E. Węgrzyn-Skrzypczak e J. Winczek. "Effect Of Natural Convection On Directional Solidification Of Pure Metal". Archives of Metallurgy and Materials 60, n. 2 (1 giugno 2015): 835–41. http://dx.doi.org/10.1515/amm-2015-0215.
Galenko, Peter K., Dmitri V. Alexandrov e Ekaterina A. Titova. "The boundary integral theory for slow and rapid curved solid/liquid interfaces propagating into binary systems". Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 376, n. 2113 (8 gennaio 2018): 20170218. http://dx.doi.org/10.1098/rsta.2017.0218.
Li, Yang, Pei Jia Li, Xing Fu Chen, Hao Ran Liu, Jian Tao Wu e Jun Tao Li. "Investment Casting Defects of a Turbine Nozzle Made by K465 Alloy". Materials Science Forum 898 (giugno 2017): 487–91. http://dx.doi.org/10.4028/www.scientific.net/msf.898.487.
Keary, A. C., e R. J. Bowen. "On the Prediction of Local Ice Formation in Pipes in the Presence of Natural Convection". Journal of Heat Transfer 121, n. 4 (1 novembre 1999): 934–44. http://dx.doi.org/10.1115/1.2826084.
Drezet, J. M., S. Pellerin, C. Bezençon e S. Mokadem. "Modelling the Marangoni convection in laser heat treatment". Journal de Physique IV 120 (dicembre 2004): 299–306. http://dx.doi.org/10.1051/jp4:2004120034.
O'Donnell, Robert G., Dayalan R. Gunasegaram e Michel Givord. "Die Casting Improvements through Melt Shear". Materials Science Forum 618-619 (aprile 2009): 33–37. http://dx.doi.org/10.4028/www.scientific.net/msf.618-619.33.
Tiedje, Niels Skat, Jesper Henri Hattel, John A. Taylor e Mark A. Easton. "Modelling Eutectic Growth in Unmodified and Modified Near-Eutectic Al-Si Alloy". Materials Science Forum 765 (luglio 2013): 160–64. http://dx.doi.org/10.4028/www.scientific.net/msf.765.160.
Zyska, Andrzej. "CA Modeling of Microsegregation and Growth of Equiaxed Dendrites in the Binary Al-Mg Alloy". Materials 14, n. 12 (18 giugno 2021): 3393. http://dx.doi.org/10.3390/ma14123393.
Bi, Zhijie, e Xiangxin Guo. "Solidification for solid-state lithium batteries with high energy density and long cycle life". Energy Materials 2, n. 2 (2022): 200011. http://dx.doi.org/10.20517/energymater.2022.07.
Liu, Heping, Jianjun Zhang, Hongbiao Tao e Hui Zhang. "Numerical analysis of local heat flux and thin-slab solidification in a CSP funnel-type mold with electromagnetic braking". Metallurgical Research & Technology 117, n. 6 (2020): 602. http://dx.doi.org/10.1051/metal/2020044.
Zhang, Pei, Feng Shan Du, Zhi Qiang Xu e Ling Ling Zhao. "Numerical Simulation on the Dendritic Spacing and Microporosity in A356 Alloy Ingot". Materials Science Forum 575-578 (aprile 2008): 115–20. http://dx.doi.org/10.4028/www.scientific.net/msf.575-578.115.
Olofsson, Jakob. "Integrated fatigue life predictions of aluminium castings using simulated local microstructure and defects". IOP Conference Series: Materials Science and Engineering 1281, n. 1 (1 maggio 2023): 012067. http://dx.doi.org/10.1088/1757-899x/1281/1/012067.
Sharifi, Pouya, Kumar Sadayappan e Jeffrey T. Wood. "The Effects of Interfacial Heat Transfer Coefficient on the Microstructure of High-Pressure Die-Cast Magnesium Alloy AM60B". Materials Science Forum 879 (novembre 2016): 1755–59. http://dx.doi.org/10.4028/www.scientific.net/msf.879.1755.
Varoto, L., M. Chosson, J.-J. Blandin, A. Papillon, S. Roure e G. Martin. "Microstructural evolutions induced by an electrical breakdown in a binary Cu-25Cr alloy". IOP Conference Series: Materials Science and Engineering 1249, n. 1 (1 luglio 2022): 012023. http://dx.doi.org/10.1088/1757-899x/1249/1/012023.
Burbelko, Andriy A., Edward Fraś, Wojciech Kapturkiewicz e Daniel Gurgul. "Modelling of Dendritic Growth during Unidirectional Solidification by the Method of Cellular Automata". Materials Science Forum 649 (maggio 2010): 217–22. http://dx.doi.org/10.4028/www.scientific.net/msf.649.217.
Sobolev, S. L. "Comparative study of solute trapping and Gibbs free energy changes at the phase interface during alloy solidification under local nonequilibrium conditions". Journal of Experimental and Theoretical Physics 124, n. 3 (marzo 2017): 459–68. http://dx.doi.org/10.1134/s1063776117020169.
Kim, Young Chan, Se Weon Choi e Chang Seog Kang. "Effect of Controlling Process Parameters on Shrinkage Porosity in Aluminum Die-Casting Rotor". Advanced Materials Research 813 (settembre 2013): 136–43. http://dx.doi.org/10.4028/www.scientific.net/amr.813.136.
SCHULZE, T. P., e M. GRAE WORSTER. "Weak convection, liquid inclusions and the formation of chimneys in mushy layers". Journal of Fluid Mechanics 388 (10 giugno 1999): 197–215. http://dx.doi.org/10.1017/s0022112099004589.
Böttger, B., e M. Apel. "Phase-field simulation of the formation of new grains by fragmentation during melting of an ABD900 superalloy". IOP Conference Series: Materials Science and Engineering 1281, n. 1 (1 maggio 2023): 012008. http://dx.doi.org/10.1088/1757-899x/1281/1/012008.
Kang, Jun-Yun, Jaecheol Yun, Byunghwan Kim, Jungho Choe, Sangsun Yang, Seong-Jun Park, Ji-Hun Yu e Yong-Jin Kim. "Micro-Texture Analyses of a Cold-Work Tool Steel for Additive Manufacturing". Materials 13, n. 3 (9 febbraio 2020): 788. http://dx.doi.org/10.3390/ma13030788.
Antonysamy, Alphons A., Philip B. Prangnell e Jonathan Meyer. "Effect of Wall Thickness Transitions on Texture and Grain Structure in Additive Layer Manufacture (ALM) of Ti-6Al-4V". Materials Science Forum 706-709 (gennaio 2012): 205–10. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.205.
Dudorov, Maxim V., Alexander D. Drozin e Victor P. Chernobrovin. "Thermodynamic Regularities of Nuclei Growth during Crystallization of Metastable Alloys". Solid State Phenomena 299 (gennaio 2020): 436–41. http://dx.doi.org/10.4028/www.scientific.net/ssp.299.436.