Bibliografie tematiche / Life cycle costing

Letteratura scientifica selezionata sul tema "Life cycle costing"

Autore: Grafiati
Pubblicato: 4 giugno 2021
Ultima modifica: 29 luglio 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Indice

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Life cycle costing".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Life cycle costing"

1

Michaux, L., e J. Gruyters. "Life Cycle Costing". European Procurement & Public Private Partnership Law Review 15, n. 1 (2020): 61–69. http://dx.doi.org/10.21552/epppl/2020/1/9.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Norman, George. "Life cycle costing". Property Management 8, n. 4 (aprile 1990): 344–56. http://dx.doi.org/10.1108/eum0000000003380.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Keuper, Frank. "Life Cycle Costing". Business + Innovation 2, n. 3 (marzo 2011): 3. http://dx.doi.org/10.1365/s35789-011-0021-4.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Gille, Christian. "Life Cycle Costing". Controlling 22, n. 1 (2010): 31–33. http://dx.doi.org/10.15358/0935-0381-2010-1-31.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Kádárová, Jaroslava, Ján Kobulnický e Katarína Teplicka. "Product Life Cycle Costing". Applied Mechanics and Materials 816 (novembre 2015): 547–54. http://dx.doi.org/10.4028/www.scientific.net/amm.816.547.

Testo completo
Abstract (sommario):
Successful performance of a company and its ability to handle growing competition is dependent on its capacity of implementing new technologies and making use of new methods of management. This report aims at cost management tool that enables controlling of costs through the whole life-cycle. Life Cycle Costing allows us to look at the start-up costs and the costs associated with the cessation of production, after-sales services costs and other expenses not taken into account in planned or operational calculation, see them as one unit and thereby evaluate the effectiveness of the product. Before establishing a production, calculation of the life-cycle costs is based on various factors which can be found in this article as well as the division of costs within the scope of calculation. It contains an example of calculation and accurate illustrations of process-based models of life-cycle costing from different points of view brought by various authors dealing with this topic, the usage of costing and the relationship with other calculations that are component parts of a company’s strategic cost management.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Daw, Andrew J. "Systems life cycle costing". Journal of Engineering Design 23, n. 1 (gennaio 2012): 75–76. http://dx.doi.org/10.1080/09544828.2011.623019.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Jagdishsingh, Real, e Rahul S Patil. "Life Cycle Costing Method". IOSR Journal of Mechanical and Civil Engineering 11, n. 2 (2014): 01–05. http://dx.doi.org/10.9790/1684-11220105.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Emblemsvag, Jan. "Activity‐based life‐cycle costing". Managerial Auditing Journal 16, n. 1 (febbraio 2001): 17–27. http://dx.doi.org/10.1108/02686900110363447.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Slowiak, Paul F. "Life Cycle Costing in Hospitals". Hospital Topics 63, n. 1 (febbraio 1985): 31–33. http://dx.doi.org/10.1080/00185868.1985.9948393.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Alexander, Keith. "Computer aided life cycle costing". Facilities 5, n. 11 (novembre 1987): 4–9. http://dx.doi.org/10.1108/eb006422.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "Life cycle costing"

1

Purushotham, Vineeth. "Dynamic Life Cycle Costing". Thesis, KTH, Industriell produktion, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-102785.

Testo completo
Abstract (sommario):
Maintenance is an extremely important issue in the industry. Testimony to this fact is that European companies spend about 140 billion euro per year on maintenance activities. In Sweden alone, the annual cost of maintenance and related activities reaches 250 billion crowns and these costs are the costs incurred when maintenance jobs are performed and does not include the consequences of poor maintenance with which the costs would be significantly higher. The new paradigm in the manufacturing sector identifies utilization of production resources as a main competitive weapon. To meet the high demands of the industry like high efficiency, enhanced customization and high speed of delivery, a much higher operational availability and capability of production systems have to be achieved. In this context, maintenance becomes an important strategic issue. The objectives of this study are to develop a dynamic LCC model supporting decision making in the early stages of investment and production development process allowing estimating and optimizing life cycle costs of production equipment including maintenance considerations. It will give the concerned stakeholders a better chance of estimating the whole life cycle costs and select proper design alternative for new investments. It can be used as a tool for the justification of investment in Condition Based Maintenance technologies which is underestimated in present calculation models.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Höhne, Christoph. "Life Cycle Costing - Systematisierung bestehender Studien". Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2010. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-26558.

Testo completo
Abstract (sommario):
Die vorliegende Arbeit untersucht Wesensmerkmale des Life Cycle Costing (LCC, dt. Lebenszykluskostenrechnung) und dessen Anwendung veröffentlicht in Fachzeitschriften. Aufgrund der langen Historie des LCC seit Beginn der 30er Jahre, gibt es zu dem Forschungsthema bereits eine Vielzahl theoretischer und empirischer Studien. Dennoch existiert bis heute keine einheitliche Definition oder ein standardisierter methodischer Rahmen. Das Ziel dieser Arbeit ist es, LCC zu charakterisieren und eine sinnvolle Methode für die Klassifizierung der vorhandenen Forschungsarbeiten zu identifizieren um methodische und inhaltliche Unterschiede darzustellen. Angewandt wird die Methodik des Literature Review, respektive einer Mischform explorativ-induktiver, qualitativer und quantitativer Inhaltsanalyse. Den Prozess der Charakterisierung und Systematisierung leiten folgende Fragestellungen: Was sind die Motivatoren der Anwendung von LCC in Firmen? Gibt es ein standardisiertes Konzept analog zur Ökobilanz (LCA)? Was sind die wesentlichen Vorteile von LCC? Was ist momentan unbefriedigend erforscht? Wo und in welcher Form wird LCC angewandt? Ergeben sich aus F-1 bis F-4 spezifische Anwendungsbereiche? Zu Beginn erfolgt im Sinne der Vision des Life Cycle Thinking eine Erörterung möglicher Motivationen einer Zuwendung zu LCC aus unternehmerischer Entscheidungsperspektive. Dem folgt eine umfangreiche Analyse und Diskussion der wesentlichen Charakterzüge. Ausgehend dieser Erkenntnis ist ein Analyseraster abgeleitet um die zu bewertenden Studien geeignet zu kategorisieren. Ein direktes Ergebnis stellt die Evaluierung von 34 Studien zu LCC dar. Als mittelbare Ergebnisse der Systematisierung gelten die Erkenntnisse zur Wahl einer optimierten Suchstrategie und die Schaffung eines Startpunkts für Forscher, die sich zukünftig mit Detailfragen des LCC beschäftigen.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Zhang, Ke. "Life cycle costing for office buildings in Canada". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp01/MQ39098.pdf.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Emblemsvåg, Jan. "Activity-based costing in designing for the life-cycle". Thesis, Georgia Institute of Technology, 1995. http://hdl.handle.net/1853/20993.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Krause, Marcus. "Environmental Life Cycle Costing (ELCC) für Produkte der Solarenergie". Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2013. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-96963.

Testo completo
Abstract (sommario):
Vor dem Hintergrund der zukünftigen Notwendigkeit einer nachhaltigen Energieversorgung beschäftigt sich die vorliegende Arbeit mit Technologien der regenerativen Energiequelle Solarenergie, insbesondere Photovoltaik (PV). Systeme zur Nutzung der unerschöpflich verfügbaren, sauberen und im Prinzip “frei Haus” gelieferten Energie der Sonne können eine bedeutsame Rolle in einer umweltverträglicheren Zukunft spielen. Allerdings ist die Herstellung der erforderlichen Komponenten heute i.d.R. noch energie- und kostenintensiv, weshalb für eine korrekte Bewertung dieser Technologien der gesamte Lebenszyklus betrachtet werden muss. Zur tieferen Analyse der PV wird die Methodik des Environmental Life Cycle Costing (ELCC) auf der Grundlage von drei Grundideen eingeführt. Konkret sind dies die Ausgangspunkte: Nachhaltigkeit, Lebenszyklusdenken und die Drei-Dimensionalität dieses Instrumentes durch die gemeinsame Betrachtung ökologischer, ökonomischer und technischer Aspekte in ihrem Zusammenspiel. Ausgehend von theoretischen Elementen der Ökobilanzierung (Life Cycle Assessment) und des Life Cycle Costings, verbunden mit den technischen Eigenschaften der Photovoltaik werden wichtigste Anforderungen und Schritte für die Durchführung eines ELCC für PV beschrieben. Mittels einer softwaregestützten Inhaltsanalyse wird im Anschluss der definierte Rahmen für ein ELCC für PV getestet (und modifiziert) gegen eine Auswahl von 135 bereits existierender Studien, die sich mit dem Lebenszyklus von PV-Technologien aus ökologischer und ökonomischer Sicht beschäftigen. Im Ergebnis hieraus können die wichtigsten Elemente eines ELCC für PV, wie beispielsweise ökologische Wirkungskategorien oder ökonomische Indikatoren, identifiziert werden (methodisches Feedback). In einem nächsten Schritt werden die Studien hinsichtlich ihrer “Qualität” bezogen auf ökologische, ökonomische und übergreifende Inhalte eines ELCC für PV bewertet. Auf diese Weise kann ein Inventar von Lebenszyklusanalysen für PV erstellt werden, das nach den Technologien und der inhaltlichen Qualität bezüglich eines ELCC strukturiert ist und für weitere Analysen als Grundlage dienen kann. Aus den bisherigen Ergebissen kann eine erste Einschätzung zum aktuellen Stand des ELCC für PV in der Literatur vorgenommen werden: Es existiert bereits ein großer Pool von Studien, die sich mit dem Lebenszyklus der PV beschäftigen. Mit Blick auf die Anforderungen eines ELCC für PV besteht jedoch Nachholbedarf in der Verbindung und gemeinsamen Betrachtung von hot spots und trade offs aus ökologischer und ökonomischer Perspektive. Der definierte theoretische Rahmen für ein ELCC für PV, die kodierten Studien sowie das erstellte Inventar von Lebenszyklusanalysen der PV können nun als Grundlage für weitere Analysen dienen. Insbesondere eine inhaltliche Auswertung der konkreten Ergebnisse von Studien kann so einen Benchmark und Orientierung für neue Lebenszyklusanalysen für PV-Technologien liefern
The special need of a sustainable energy supply in mind the technologies of the renewable source solar energy, especially photovoltaics (PV) is main subject of the present thesis. Using the inexhaustible, clean and “freely delievered” power from the sun solar devices may play a major role in a cleaner future, but, on the other hand, they are still energy consuming and expensive in their production which consequently demands a whole life cycle perspective when assessing this technology. For a closer look at PV the methodology of Environmental Life Cycle Costing (ELCC) is introduced by following three theoretical points of view. Namely these are sustainability, life cycle thinking and the three dimensional nature of this tool by regarding environmental, economic and technical aspects in their interaction. Based on theoretical elements of Life Cycle Assessment and Life Cycle Costing in combination with the technical background of photovoltaics main requirements and steps for performing an ELCC for PV are described. By executing software based content analysis the defined framework is checked (and modified) against a choice of 135 existing studies analyzing the life cycle of PV technologies from an environmental or economic perspective. As a result the main elements of an ELCC for PV, e.g. environmental impact categories and economic indicators, are identified (methodological feedback). Within the next step the existing studies are rated by their “quality” regarding the environmental, economic and more general parts of an ELCC for PV in order to create an inventory of life cycle studies for PV. This inventory is structured by technologies as well as quality of content respecting ELCC and might be used for further analyses. At this stage the results propose the possibility of a first estimate of the present status of ELCC for PV: until now there is a good pool of existing analyses of the life cycle of PV systems. But from an ELCC perspective the examination of common hot spots and trade offs between economic and environmental aspects should be expanded. The theoretical framework of ELCC for PV, the encoded studies and the inventory of life cycle analyses for PV are now the starting point for further analyses, especially of the individual outcome within studies, which will then pose a benchmark for new life cycle studies of PV technology
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Oduyemi, Olufolahan Ifeoluwa. "Life cycle costing methodology for sustainable commerical office buildings". Thesis, University of Derby, 2015. http://hdl.handle.net/10545/581569.

Testo completo
Abstract (sommario):
The need for a more authoritative approach to investment decision-making and cost control has been a requirement of office spending for many years now. The commercial offices find itself in an increasingly demanding position to allocate its budgets as wisely and prudently as possible. The significant percentage of total spending on buildings demands a more accurate and adaptable method of achieving quality of service within the constraints on the budgets. By adoption of life cycle costing techniques with risk management, practitioners have the ability to make accurate forecasts of likely future running costs. This thesis presents a novel framework (Artificial Neural Networks and probabilistic simulations) for modelling of operating and maintenance historical costs as well as economic performance measures of LCC. The methodology consisted of eight steps and presented a novel approach to modelling the LCC of operating and maintenance costs of two sustainable commercial office buildings. Finally, a set of performance measurement indicators were utilised to draw inference from these results. Therefore, the contribution that this research aimed to achieve was to develop a dynamic LCC framework for sustainable commercial office buildings, and by means of two existing buildings, demonstrate how assumption modelling can be utilised within a probabilistic environment. In this research, the key themes of risk assessment, probabilistic assumption modelling and stochastic assessment of LCC has been addressed. Significant improvements in existing LCC models have been achieved in this research in an attempt to make the LCC model more accurate and meaningful to estate managers and high-level capital investment decision makers A new approach to modelling historical costs and forecasting these costs in sustainable commercial office buildings is presented based upon a combination of ANN methods and stochastic modelling of the annual forecasted data. These models provide a far more accurate representation of long-term building costs as the inherent risk associated with the forecasts is easily quantifiable and the forecasts are based on a sounder approach to forecasting than what was previously used in the commercial sector. A novel framework for modelling the facilities management costs in two sustainable commercial office buildings is also presented. This is not only useful for modelling the LCC of existing commercial office buildings as presented here, but has wider implications for modelling LCC in competing option modelling in commercial office buildings. The processes of assumption modelling presented in this work can be modified easily to represent other types of commercial office buildings. Discussions with policy makers in the real estate industry revealed that concerns were held over how these building costs can be modelled given that available historical data represents wide spending and are not cost specific to commercial office buildings. Similarly, a pilot and main survey questionnaire was aimed at ascertaining current level of LCC application in sustainable construction; ranking drivers and barriers of sustainable commercial office buildings and determining the applications and limitations of LCC. The survey result showed that respondents strongly agreed that key performance indicators and economic performance measures need to be incorporated into LCC and that it is important to consider the initial, operating and maintenance costs of building when conducting LCC analysis, respondents disagreed that the current LCC techniques are suitable for calculating the whole costs of buildings but agreed that there is a low accuracy of historical cost data.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Priest, Kevin Kennett. "Life cycle costing of active and passive solar retrofits". [Gainesville, Fla.] : University of Florida, 2009. http://purl.fcla.edu/fcla/etd/UFE0024497.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Henzel, Anne [Verfasser]. "«Life Cycle Costing» als Instrument nachhaltiger öffentlicher Auftragsvergabe / Anne Henzel". Frankfurt a.M. : Peter Lang GmbH, Internationaler Verlag der Wissenschaften, 2019. http://d-nb.info/1199773271/34.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Underwood, James M. "Use of life cycle costing in the development of standards". Thesis, Monterey, California. Naval Postgraduate School, 1988. http://hdl.handle.net/10945/23144.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Graham, Ruth. "Life cycle costing in spare parts procurement: a decision model". Thesis, Monterey, California. Naval Postgraduate School, 1988. http://hdl.handle.net/10945/23286.

Testo completo
Abstract (sommario):
Life cycle costing methods can be applied to the procurement of some, but not all, spare parts. As a result, a decision model is needed to determine which spare parts should be considered for life cycle costing. This thesis discusses a decision model for determining the applicability of life cycle costing to spare part procurement. The thesis briefly reviews the application of the life cycle costing concept to the acquisition of major systems and associated spare parts. It then reviews current spare parts acquisition techniques and identifies critical criteria to be considered during the acquisition of spare parts using life cycle costing techniques. Finally, the thesis uses the identified characteristics to develop the decision model. Theses. (sdw)
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Libri sul tema "Life cycle costing"

1

Muthu, Subramanian Senthilkannan, a cura di. Life Cycle Costing. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-40993-6.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Boussabaine, Halim A., e Richard J. Kirkham, a cura di. Whole Life-Cycle Costing. Oxford, UK: Blackwell Publishing Ltd, 2004. http://dx.doi.org/10.1002/9780470759172.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

1962-, Hunkeler David, Lichtenvort Kerstin, Rebitzer Gerald e SETAC-Europe, a cura di. Environmental life cycle costing. Boca Raton: CRC Press, 2008.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

S, Dhillon B. Life cycle costing for engineers. Boca Raton: Taylor & Francis, 2010.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

R, Yanuck Rudolph, a cura di. Introduction to life cycle costing. Atlanta, Ga: Fairmont Press, 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

W, Bull John, a cura di. Life cycle costing for construction. London: Blackie Academic & Professional, 1993.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Kirk, Stephen J. Life cycle costing for design professionals. 2a ed. New York: McGraw-Hill, 1995.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Roger, Flanagan, a cura di. Life cycle costing: Theory and practice. London: BSP, 1989.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Ferry, Douglas J. Life cycle costing: A radical approach. London: Construction Industry Research and Information Association, 1991.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Royal Institution of Chartered Surveyors. Quantity Surveyors Division., a cura di. Life cycle costing: A worked example. London: Surveyors Publications on behalf of RICS, 1987.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Capitoli di libri sul tema "Life cycle costing"

1

Ashford, Norman, e Clifton A. Moore. "Life-Cycle Costing". In Airport Finance, 147–86. Boston, MA: Springer US, 1992. http://dx.doi.org/10.1007/978-1-4757-0686-4_8.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Hastings, Nicholas Anthony John. "Life Cycle Costing". In Physical Asset Management, 149–58. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-14777-2_8.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Pohl, Edward, e Heather Nachtmann. "Life Cycle Costing". In Decision Making in Systems Engineering and Management, 137–81. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470926963.ch5.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Seeley, Ivor H. "Life Cycle Costing". In Building Economics, 308–79. London: Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13757-2_13.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Thumann, Albert. "Life Cycle Costing". In Energy Management and Control Systems Handbook, 277–304. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4684-6611-9_19.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Ciroth, Andreas, Jutta Hildenbrand e Bengt Steen. "Life Cycle Costing". In Sustainability Assessment of Renewables-Based Products, 215–28. Chichester, UK: John Wiley & Sons, Ltd, 2015. http://dx.doi.org/10.1002/9781118933916.ch14.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Park, Alan. "Life Cycle Costing". In Facilities Management, 71–83. London: Macmillan Education UK, 1994. http://dx.doi.org/10.1007/978-1-349-13171-6_7.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Park, Alan. "Life Cycle Costing". In Facilities Management, 73–86. London: Macmillan Education UK, 1998. http://dx.doi.org/10.1007/978-1-349-14879-0_7.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Eisner, Howard. "Life Cycle Costing". In Systems Engineering: Building Successful Systems, 52–55. Cham: Springer International Publishing, 2011. http://dx.doi.org/10.1007/978-3-031-79336-3_14.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Ammons, David N., e Dale J. Roenigk. "Life-cycle costing". In Tools for Decision Making, 263–71. 3a ed. London: Routledge, 2021. http://dx.doi.org/10.4324/9781003129431-25.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Life cycle costing"

1

Nasr, Nabil, e Edward A. Varel. "Total Product Life-Cycle Analysis and Costing". In 1997 Total Life Cycle Conference and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1997. http://dx.doi.org/10.4271/971157.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Tan, Xincai, Jian Wang, Yuchun Xu, Srinivasan Raghunathan, Dave Gore e John Doherty. "Costing of Aluminium for Life Cycle". In 46th AIAA Aerospace Sciences Meeting and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2008. http://dx.doi.org/10.2514/6.2008-1123.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Stoy, Christian, e Verena Walter. "Life-cycle costing of laboratory buildings". In 25th Annual European Real Estate Society Conference. European Real Estate Society, 2016. http://dx.doi.org/10.15396/eres2016_33.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Moser, Gerhard, Julien Le Duigou e Magali Bosch-Mauchand. "Life Cycle Costing in Manufacturing Process Management". In ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/esda2012-82943.

Testo completo
Abstract (sommario):
In the last two decades during which the competitive business environment increased, it became crucial for each company to find the most accurate strategy to make survive its business. For that reason they need to manage and control their costs. Life Cycle Costing is one of these tools, which helps to analyse the cost of a product in the whole life of a product. To be competitive, the organisations have to optimize not only their products but also all their processes. Manufacturing Process Management (MPM) addresses the area between product design and production. Therefore MPM supports to optimize the manufacturing area of a factory. With different virtual scenarios the best solution of the manufacturing process can be obtained and at the same time it is possible to reduce time to market, costs and increase the quality. The focus of this paper is to integrate Life Cycle Costing tools and methods in the MPM part of the Product Lifecycle Management (PLM). We will discuss the implementation of Activity Based Costing (ABC) and Case-Based Reasoning (CBR) methods in a PLM tool for an early design decision support.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Schneiderova-Heralova, Renata. "Importance of life cycle costing for construction projects". In 17th International Scientific Conference Engineering for Rural Development. Latvia University of Agriculture, 2018. http://dx.doi.org/10.22616/erdev2018.17.n405.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Dowie, T. "Product disassembly costing in a life-cycle context". In International Conference on Clean Electronics Products and Technology (CONCEPT). IEE, 1995. http://dx.doi.org/10.1049/cp:19951185.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Lazzari, Silvia, e Alessandro Levizzari. "Life Cycle Costing as a New Tool Matching Economical and Environmental Evaluations: The Experience on a Real Case Study". In Total Life Cycle Conference and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-1466.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Mattioli, M., E. Willmann, R. Østebø e E. H. Paulsen. "Life Cycle Costing Application in the Energy Sector – Technology Applications". In Offshore Technology Conference. OTC, 2024. http://dx.doi.org/10.4043/35368-ms.

Testo completo
Abstract (sommario):
Abstract This paper presents use cases of the ISO 15663:2021 standard for industry cost management and business value crea-tion. The standard contains requirements and guidance on how to implement and apply the life cycle costing methodology, to provide decision support for selection between alternative competing options. The objective of the paper is to show recent indus-try applications and how value can be created by application of life cycle costing in oil & gas, particularly focusing on new technology development and lower carbon energy solutions. ISO 15663:2021 provides a framework for value optimization over the entire life of an asset. It promulgates a manage-ment methodology and application of life cycle costing across all life cycle phases. The purpose is to provide decision support for selecting between alternative options for relevant life cycle costing subject matters. The life cycle costing applicability to new technology innovation that can replace conventional technology will specifically be addressed based on recent operator and supplier studies. The use case concerning the deployment of subsea drones in subsea field development is presented. Subsea drone deployment is one of most challenging improvement for the oil and gas industries, being a game changer for the carbon footprint and cost reduction of operations. The ISO 15663:2021 has been applied in order to guide the decision maker throughout a proper selection of different competing options and enabling a fully representative life cycle cost analysis. The paper also presents an example of use of life cycle costing to compare and evaluate differences in business performance, as well as opportunities, between conventional topsides and Subsea Chemical Storage and Injection System (SCSIS) for subsea wells. The methodology served as a comprehensive tool for comparing the life cycle cost of two alternative options. Oil & Gas Operators as well as Contractors and Vendors are the main users of ISO 15663:2021. Besides the use cases presented in this paper, the ultimate goal of the authors is to demonstrate that by using a proper life cycle costing methodology, the decision making can be ultimately rigorous and coherent.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Martin, Tim. "Predicted Pavement Life-Cycle Costing of Surface Maintenance Treatments". In GeoShanghai International Conference 2010. Reston, VA: American Society of Civil Engineers, 2010. http://dx.doi.org/10.1061/41104(377)68.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Biolek, Vojtěch, e Tomáš Hanák. "Material life cycle costing of buildings: A case study". In INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS (ICNAAM 2017). Author(s), 2018. http://dx.doi.org/10.1063/1.5043874.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Life cycle costing"

1

Ruegg, Rosalie T. Life-cycle costing for energy conservation in buildings:. Gaithersburg, MD: National Institute of Standards and Technology, 1989. http://dx.doi.org/10.6028/nist.ir.89-4129.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Ruegg, Rosalie T., e Stephen R. Petersen. Life-cycle costing for energy conservation in buildings:. Gaithersburg, MD: National Institute of Standards and Technology, 1989. http://dx.doi.org/10.6028/nist.ir.89-4130.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Ruegg, Rosalie T., e Stephen R. Petersen. Life-cycle costing for energy conservation in buildings:. Gaithersburg, MD: National Institute of Standards and Technology, 1992. http://dx.doi.org/10.6028/nist.ir.4778.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Fuller, Sieglinde K., e Stephen R. Petersen. Life-cycle costing workshop for energy conservation in buildings:. Gaithersburg, MD: National Institute of Standards and Technology, 1994. http://dx.doi.org/10.6028/nist.ir.5165-1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Fuller, Sieglinde K., e Stephen R. Petersen. Life-cycle costing manual for the federal energy management programs. Gaithersburg, MD: National Institute of Standards and Technology, 1996. http://dx.doi.org/10.6028/nist.hb.135-1995.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Kneifel, Joshua, e David Webb. LIFE CYCLE COSTING MANUAL for the Federal Energy Management Program. National Institute of Standards and Technology, aprile 2022. http://dx.doi.org/10.6028/nist.hb.135e2022.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Kneifel, Joshua D. LIFE CYCLE COSTING MANUAL for the Federal Energy Management Program. Gaithersburg, MD: National Institute of Standards and Technology, 2022. http://dx.doi.org/10.6028/nist.hb.135e2022-upd1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Fuller, Sieglinde K., Amy S. Rushing e Gene M. Meyer. Project-oriented life-cycle costing workshop for energy conservation in buildings. Gaithersburg, MD: National Institute of Standards and Technology, 2001. http://dx.doi.org/10.6028/nist.ir.6806.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Fuller, Sieglinde K., Amy S. Rushing e Gene M. Meyer. Project-oriented life-cycle costing workshop for energy conservation in buildings. Gaithersburg, MD: National Institute of Standards and Technology, 2002. http://dx.doi.org/10.6028/nist.ir.6806r2002.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Fuller, Sieglinde K., Amy S. Rushing e Gene M. Meyer. Project-oriented life-cycle costing workshop for energy conservation in buildings. Gaithersburg, MD: National Institute of Standards and Technology, 2004. http://dx.doi.org/10.6028/nist.ir.6806r2004.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Ti possono interessare anche gli elenchi estesi di opere sul tema "Life cycle costing":
Articoli di riviste Tesi Libri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia