Letteratura scientifica selezionata sul tema "Kinetic of transformation"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Kinetic of transformation".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Kinetic of transformation":
Perrillat, J. P. "Kinetics of high-pressure mineral phase transformations using in situ time-resolved X-ray diffraction in the Paris-Edinburgh cell: a practical guide for data acquisition and treatment". Mineralogical Magazine 72, n. 2 (aprile 2008): 683–95. http://dx.doi.org/10.1180/minmag.2008.072.2.683.
Tone, Taiga, e Nobuyoshi Koga. "Interplay between Thermally Induced Aragonite–Calcite Transformation and Multistep Dehydration in a Seawater Spiral Shell (Euplica scripta)". Processes 11, n. 6 (29 maggio 2023): 1650. http://dx.doi.org/10.3390/pr11061650.
Atabekyan, L. S., A. K. Chibisov, T. A. Svyatoslavskaya, N. L. Svyatoslavskii e V. P. Markelov. "Single- and Double-Pulse Laser Kinetic Spectroscopy of Indoline Spiropyran". Химия высоких энергий 57, n. 5 (1 settembre 2023): 349–54. http://dx.doi.org/10.31857/s0023119323050017.
Chai, Zhuo. "Catalytic Asymmetric Transformations of Racemic Aziridines". Synthesis 52, n. 12 (16 marzo 2020): 1738–50. http://dx.doi.org/10.1055/s-0039-1690857.
Carmona, José A., Carlos Rodríguez-Franco, Rosario Fernández, Valentín Hornillos e José M. Lassaletta. "Atroposelective transformation of axially chiral (hetero)biaryls. From desymmetrization to modern resolution strategies". Chemical Society Reviews 50, n. 5 (2021): 2968–83. http://dx.doi.org/10.1039/d0cs00870b.
Yousfi, Oussama, Yves J. M. Bréchet, Patricia Donnadieu, Florence Robaut, Federic Charlot, Andreas Kasper e Francis Serruys. "Phase Transformations in the NiS Nickel Sulphide: Microstructure, Mechanisms and Modelling through In Situ Microscopy." Solid State Phenomena 172-174 (giugno 2011): 402–7. http://dx.doi.org/10.4028/www.scientific.net/ssp.172-174.402.
Wang, Jun, Chen Wei, Haoxue Yang, Tong Guo, Tingting Xu e Jinshan Li. "Phase Transformation Kinetics of a FCC Al0.25CoCrFeNi High-Entropy Alloy during Isochronal Heating". Metals 8, n. 12 (3 dicembre 2018): 1015. http://dx.doi.org/10.3390/met8121015.
Wang, Jun, Haoxue Yang, Tong Guo, Jiaxiang Wang, William Yi Wang e Jinshan Li. "Effect of Cold Rolling on the Phase Transformation Kinetics of an Al0.5CoCrFeNi High-Entropy Alloy". Entropy 20, n. 12 (30 novembre 2018): 917. http://dx.doi.org/10.3390/e20120917.
Kohout, Jan. "Simple and Precise Description of the Transformation Kinetics and Final Structure of Dual Phase Steels". Materials 14, n. 7 (4 aprile 2021): 1781. http://dx.doi.org/10.3390/ma14071781.
Yang, Jian, Xiang Xin Xue, Li Mei Pan, Mei Wang e Tai Qiu. "Phase-Transformation Kinetics of TiO2 in TiO2/(O′+β′)-Sialon Multi-Phase Ceramics". Key Engineering Materials 336-338 (aprile 2007): 2318–21. http://dx.doi.org/10.4028/www.scientific.net/kem.336-338.2318.
Tesi sul tema "Kinetic of transformation":
Massam, Alexandra. "A kinetic model for the transformation of phenol by peroxidase". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0008/MQ50641.pdf.
Brandt, Catharine Jane. "Transformation of the kinetic energy of rainfall with variable tree canopies". Thesis, Royal Holloway, University of London, 1986. http://repository.royalholloway.ac.uk/items/b6beecb7-fb73-4d83-b905-206fccf515d7/1/.
Watkins, Claire. "The Transformation of Electricity in my Brain". VCU Scholars Compass, 2004. http://scholarscompass.vcu.edu/etd/1062.
Träff, Annika. "Asymmetric transformation of ß- and γ-functionalized alcohols : Study of combined ruthenium-catalyzed racemization and enzymatic resolution". Doctoral thesis, Stockholms universitet, Institutionen för organisk kemi, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-56947.
At the time of the doctoral defense, the following papers were unpublished and had a status as follows: Paper 2: In press. Paper 3: Epub ahead of print.
Crouïgneau, Guillaume. "Films de type Ni-Co-Mn-In : élaboration et étude de la transformation magnétostructurale". Thesis, Université Grenoble Alpes (ComUE), 2015. http://www.theses.fr/2015GREAY048/document.
Ni-Mn-X (X=In, Ga, Sn and Sb) Heusler type alloys present interesting mechanical, magnetical and thermal properties owing to the martensite-austenite structural transition. Combining these properties induce many potentials applications in the field of actuators, sensors and coolers. Processing these materials into films is of great interest for micro-devices but remains a challenge. It shall be the purpose of this thesis. Part of this thesis shall be dedicated to the development of a Ni-Co-Mn-In Heusler film using a co-sputtering process. The main achievement of the thesis is to have obtained a film exhibiting a structural and magnetic transformation at room temperature. After a study of the structure and microstructure of martensite and austenite phases, magnetic properties are investigated. The evolution of the magnetic state during the first order transformation observed in some films leads to interesting magnetocaloric and activating properties. Optimal results, both in terms of working temperature and functional properties, are obtained for a film with a composition of Ni45,2Co4,7Mn36,2In13,9. Resistivity measurements under high magnetic field are novel on such films. These new measurements have made it possible to study the irreversibility and phase transformation blocking induced by a magnetic field (kinetic arrest). Understanding the physical effect underlying the thermal irreversibility and the blocking by a magnetic field is indeed important for applications based on such materials with strongly coupled mechanical, magnetical and thermal properties
Venturato, Giulia. "Modelling the Influence of Phase Transformation Kinetics in 22MnB5 Hot Stamping". Doctoral thesis, Università degli studi di Padova, 2019. http://hdl.handle.net/11577/3424888.
La deformazione di lamiere sta guadagnando, negli ultimi anni, sempre più importanza dal momento che l’industria automobilistica sta richiedendo caratteristiche molto specifiche per la nuova generazione di componenti per la scocca. Le richieste di leggerezza per aumentare il risparmio di carburante sta diventando un fattore chiave per il design di nuovi componenti, ma la leggerezza deve necessariamente essere accoppiata con l’alta resistenza meccanica per garantire la sicurezza dei passeggeri. Uno dei metodi più efficaci per incontrare tali richieste è stato l’utilizzo della nuova generazione di acciai alto resistenziali (HSS), le cui proprietà meccaniche possono essere migliorate grazie ai trattamenti termici. Lo stampaggio a caldo diretto rappresenta una soluzione efficace per questo scopo, grazie alla possibilità di accorciare la catena di processo di molti componenti metallici della scocca dell’auto. Lamiere più sottili vengono impiegate per la produzione di molte parti dell’auto, garantendo le desiderate leggerezza e alta resistenza, per ottenere la resistenza agli urti necessaria a proteggere i passeggeri del veicolo. Lo stampaggio a caldo è, oggigiorno, ampiamente applicato nell’industria automobilistica, ma la ricerca in questo campo è ancora di alto interesse nell’ambiente accademico. Questo è dovuto al fatto che lo stampaggio a caldo coinvolge un’ampia serie di parametri che devono essere accuratamente compresi per migliorare il potenziale del processo e la complessità delle parti stampate. A partire dal primo stage di riscaldamento all’ultima fase di tempra, il materiale subisce una serie di trasformazioni microstrutturali e meccaniche, la cui ottimizzazione e il loro corretto timing controlla le caratteristiche finali del componente. Parallelamente al lavoro di ricerca sperimentale, una grande branca della ricerca è volta allo studio delle simulazioni numeriche che sono di fondamentale importanza per simulare il processo e ottimizzarne ogni step. Il presente lavoro si inquadra nella ricerca nell’ambito dello stampaggio a caldo. Il materiale studiato in questo lavoro è l’acciaio temprabile 22MnB5 rivestito da AluSi®, conosciuto commercialmente con il nome di Usibor 1500 P®. La completa caratterizzazione del materiale ha come scopo di coprire le mancanze nella letteratura nell’ambito dei test ad alta temperatura sulla reologia di tutte le microstrutture, proponendo un modello di fitting per rappresentare i dati nei modelli FE. La formabilità ad alta temperatura è altresì soggetto di studio, analizzando gli effetti della temperatura e della microstruttura nella risultante curva limite di formabilità (FLC). La cinetica di trasformazione di fase è stata oggetto di studio, confermando i dati presentati in letteratura e fornendo le basi per questo lavoro. Infine, il nuovo modello di danneggiamento Generalized Incremental Stress-State dependent damage MOdel (GISSMO) è stato calibrato. L’intera attività sperimentale è stata affiancata alle simulazioni numeriche, per la necessità dell’analisi e calibrazione dei dati. Il lavoro presentato in questa tesi è stato portato avanti nei laboratori del Dipartimento di Ingegneria Industriale, DII, dell’università di Padova, da ottobre 2016 a settembre 2019 sotto la supervisione del prof. Andrea Ghiotti. Questo lavoro è parte del progetto di ricerca dell’Università chiamato “Advanced CAE method to predict failure and material properties in hot forming” ref. 2014-4050 URP Award, sviluppato in collaborazione con Ford Motor Company GMBH.
Moscu, Corcodel Alina. "Structural transformation under reaction conditions of supported PtSn nanoparticles characterized by in situ DRIFTS and kinetic modeling". Thesis, Lyon 1, 2015. http://www.theses.fr/2015LYO10177.
The selective oxidation of CO in the presence of a large excess of H2 (PROX) is considered as a crucial step in the purification of H 2 to be used in low-temperature fuel cells, which are clean sources of energy. The objective of this thesis was to better understand the reaction mechanisms taking place over promising catalysts based on Pt and Sn. Model Pt-Sn catalysts were prepared by a two-step method: (i) synthesis of metallic nanoparticules (NP) in a colloidal suspension followed by (ii) the deposition of these NPs onto a support. The first step of the method enabled to produce well-controlled Pt-Sn NPs in terms of size and composition. However, the NPs were partly destroyed during the deposition step followed by calcination, due to the reoxidation of Sn. The adsorption of CO followed by diffuse reflectance spectroscopy (DRIFTS) was used to characterize the nature of these solids following a reduction, which was able to regenerate an alloyed phase. The DRIFTS analysis enabled to discriminate between Pt in an alloyed phase and Pt on monometallic surfaces. The heat of CO adsorption measured by DRIFTS appeared to be much lower than that associated with the pure Pt phase. Surprinsingly, a segregation of Pt and Sn was observed under a CO/H2 mixture below 175°C. In situ analysis by DRIFTS of the PROX reaction indicated that the Pt-Sn alloy rapidly decomposed in the presence of O2, forming an intimate mixture of Pt and SnOx. No evidence of the presence of Pt -Sn alloyed phases could be obtained under PROX conditions, suggesting that the superior catalytic activity of the Pt –Sn materials were related to the Pt+SnOx mixture. A detailed PROX microkinetic model was developed over Pt+SnOx, based on those relevant to CO oxidation and PROX over pure Pt. This work epitomises the benefits in combining in situ spectroscopic study with kinetic modelling to better understand the structure of catalysts “at work” and reaction mechanisms
Shiraiwa, Manabu [Verfasser]. "Kinetic modeling and experiments on gas uptake and chemical transformation of organic aerosol in the atmosphere / Manabu Shiraiwa". Mainz : Universitätsbibliothek Mainz, 2011. http://d-nb.info/1025263596/34.
Moyano, Garcia Iván. "Controllability of of some kinetic equations, of parabolic degenerated equations and of the Schrödinger equation via domain transformation". Thesis, Université Paris-Saclay (ComUE), 2016. http://www.theses.fr/2016SACLX062/document.
This memoir presents the results obtained during my PhD, whose goal is the study of the controllability of some Partial Differential Equations.The first part of this thesis is concerned with the study of the controllability of some kinetic equations undergoing different regimes. Under a collisional regime, we study the controllability of the Kolmogorov equation, a particular case of kinetic Fokker-Planck equation, in the phase space $R^d times R^d$. We obtain the null-controllability of this equation thanks to the use of a spectral inequality associated to the Laplace operator in the whole space. Under a non-collisional regime, we study the controllability of two fluid-kinetic models, the Vlasov-Stokes system and the Vlasov-Navier-Stokes system, which exhibe nonlinearities due to the coupling terms. In those cases, the strategy relies on the Return method.In the second part, we study the controllability of a family of 1-D degenerate parabolic equations by the flatness method, which allows the construction of explicit controls.The third part is focused on the problem of the controllability of the Schrödinger equation via domain deformations, i.e., using the domain as a control. We obtain a result of this kind in the case of the two-dimensional unit disk, for radial data. Our methods are based on a local exact controllability result around a certain trajectory, obtained thanks to the Inverse Mapping theorem
Cluff, Stephen Roy. "Characterization and Modeling of the Martensite Transformation in Advanced High-Strength Steels". BYU ScholarsArchive, 2019. https://scholarsarchive.byu.edu/etd/9051.
Libri sul tema "Kinetic of transformation":
H, Drummond Charles, e United States. National Aeronautics and Space Administration., a cura di. Comments on "Kinetic Study on the Hexacelsian-Celsian Phase Transformation". [Washington, DC: National Aeronautics and Space Administration, 1992.
Bansal, Narottam P. Comments on "Kinetic Study on the Hexacelsian-Celsian Phase Transformation". [Washington, DC: National Aeronautics and Space Administration, 1992.
Slezov, V. V. Kinetics of first-order phase transitions. Weinheim [Germany]: Wiley-VCH, 2009.
1948-, Chvoj Z., Šesták Jaroslav 1938- e Tříska A, a cura di. Kinetic phase diagrams: Nonequilibrium phase transitions. Amsterdam: Elsevier, 1991.
A, Jackson Kenneth. Kinetic processes: Crystal growth, diffusion, and phase transitions in materials. Weinheim: Wiley-VCH, 2004.
S, Im James, a cura di. Thermodynamics and kinetics of phase transformations: Symposium held November 27-December 1, 1995, Boston, Massachusetts, U.S.A. Pittsburgh, Penn: Materials Research Society, 1996.
D, Nikitin E., e Akademii͡a︡ nauk SSSR. Uralʹskiĭ nauchnyĭ t͡s︡entr., a cura di. Termodinamicheskie svoĭstva metastabilʹnykh sistem i kinetika fazovykh prevrashcheniĭ. Sverdlovsk: Akademii͡a︡ nauk SSSR, Uralʹskiĭ nauch. t͡s︡entr, 1985.
Abeyaratne, Rohan. Evolution of phase transitions: A continuum theory. New York: Cambridge University Press, 2006.
M, Chen, a cura di. Phase transformation kinetics in thin films: Symposium held April 29-May 1, 1991, Anaheim, California, U.S.A. Pittsburgh, Pa: Materials Research Society, 1992.
Center, Langley Research, a cura di. A gas-kinetic method for hyperbolic-elliptic equations and its application in two-phase fluid flow. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1999.
Capitoli di libri sul tema "Kinetic of transformation":
Yurchenko, Sergey. "Kinetic energy operator: Coordinate transformation". In Computational Spectroscopy of Polyatomic Molecules, 49–78. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9780429154348-3.
Yoo, Han-Ill. "Kinetics of Phase Transformation: Initial Stage". In Lectures on Kinetic Processes in Materials, 173–214. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-25950-1_5.
Yoo, Han-Ill. "Kinetics of Phase Transformation: Later Stage". In Lectures on Kinetic Processes in Materials, 215–45. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-25950-1_6.
Phusunti, Neeranuch, e Andreas Hornung. "Formal Kinetic Parameters - Problems and Solutions in Deriving Proper Values". In Transformation of Biomass, 257–84. Chichester, UK: John Wiley & Sons, Ltd, 2014. http://dx.doi.org/10.1002/9781118693643.ch14.
Aziz, Muhammad Fakhrul Syukri Abd, e Zainul Akmar Zakaria. "Oil Palm Biomass and Its Kinetic Transformation Properties". In Biosynthetic Technology and Environmental Challenges, 73–87. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-7434-9_5.
Sapienza, Alessio, Andrea Frazzica, Angelo Freni e Yuri Aristov. "Adsorptive Heat Transformation and Storage: Thermodynamic and Kinetic Aspects". In Dynamics of Adsorptive Systems for Heat Transformation, 1–18. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-51287-7_1.
Chen, Ying. "Kinetic Monte Carlo Modeling of Martensitic Phase Transformation Dynamics". In Handbook of Materials Modeling, 1265–85. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-319-44677-6_100.
Chen, Ying. "Kinetic Monte Carlo Modeling of Martensitic Phase Transformation Dynamics". In Handbook of Materials Modeling, 1–21. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-42913-7_100-1.
Wen, Yuanyuan, Feng Huang, Yonghua Rong e Zhenghong Guo. "Evaluation of Kinetic Equation of Athermal Martensitic Transformation in Low Carbon Steels". In PRICM, 797–802. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118792148.ch98.
Wen, Yuanyuan, Feng Huang, Yonghua Rong e Zhenghong Guo. "Evaluation of Kinetic Equation of Athermal Martensitic Transformation in Low Carbon Steels". In Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing, 797–802. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-48764-9_98.
Atti di convegni sul tema "Kinetic of transformation":
Chau, Sheryl, e Ranjan Mukherjee. "Kinetic to Potential Energy Transformation Using an Elastica". In ASME 2019 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/dscc2019-8929.
Chauvin, Camille, Frédéric Zucchini e David Palma de Barros. "Study on phase transformation in Tin under dynamic compression". In 2019 15th Hypervelocity Impact Symposium. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/hvis2019-027.
Brarda, María Cecilia, e Horacio F. Gorodischer. "Transformation as a production of meaning of the kinetic typographic form". In Congreso SIGraDi 2020. São Paulo: Editora Blucher, 2020. http://dx.doi.org/10.5151/sigradi2020-5.
Goh, Sharon Meng Xuang, Bridgid Lai Fui Chin, Yie Hua Tan, Chung Loong Yiin, Zeinab Abbas Jawad e Dana H. Abdeen. "Application of Artificial Neural Network Approach for the Kinetic Parameters Determination of Pyrolysis Aseptic Waste Packages". In 2023 International Conference on Digital Applications, Transformation & Economy (ICDATE). IEEE, 2023. http://dx.doi.org/10.1109/icdate58146.2023.10248689.
Otremba, Frank, e José A. Romero Navarrete. "Experimental Assessing of the Energy Transformation in Turns". In ASME 2022 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/imece2022-88319.
Wang, Lijin. "Effective computation of stochastic protein kinetic equation by reducing stiffness via variable transformation". In INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2015 (ICNAAM 2015). Author(s), 2016. http://dx.doi.org/10.1063/1.4952352.
Wu, Xiaodong, Jianshen Wu, Guojun Sun e Caoyin Xie. "One-dimensional modeling of shape memory alloy with improved kinetic relation for phase transformation". In SPIE's 8th Annual International Symposium on Smart Structures and Materials, a cura di Vittal S. Rao. SPIE, 2001. http://dx.doi.org/10.1117/12.436499.
Ye, Yuqing, Xin Wang, Amit G. Reiss, Amy T. Kan e Mason B. Tomson. "Siderite Formation Kinetics, Solubility, and Phase Transformation on CO2 Corroding Mild Carbon Steel Under High Temperature". In SPE International Conference on Oilfield Chemistry. SPE, 2023. http://dx.doi.org/10.2118/213880-ms.
Allen Demers, Louis-Alexis, e Cle´ment Gosselin. "Kinematic Design of Mechanisms for the Control of an Oscillating Wing". In ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-34580.
Santhanakrishnan, S., F. R. Kong e R. Kovacevic. "A Three-Dimensional Transient Modeling and Experimental Analysis of Laser Transformation Hardening by Using High Power Direct Diode Laser". In ASME 2009 International Manufacturing Science and Engineering Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/msec2009-84152.
Rapporti di organizzazioni sul tema "Kinetic of transformation":
Stewart, Robert D. Kinetic Modeling of Damage Repair, Genome Instability, and Neoplastic Transformation. Office of Scientific and Technical Information (OSTI), marzo 2007. http://dx.doi.org/10.2172/900981.
Shoseyov, Oded, Steven A. Weinbaum, Raphael Goren e Abhaya M. Dandekar. Biological Thinning of Fruit Set by RNAase in Deciduous Fruit Trees. United States Department of Agriculture, agosto 1993. http://dx.doi.org/10.32747/1993.7568110.bard.
Elmer, J. W., J. Wong e T. Palmer. The Kinetics of Phase Transformation in Welds. Office of Scientific and Technical Information (OSTI), febbraio 2002. http://dx.doi.org/10.2172/15004301.
Wicks, June. Phase transformation kinetics in shock-compressed Zirconium. Office of Scientific and Technical Information (OSTI), dicembre 2019. http://dx.doi.org/10.2172/1579714.
Militzer, M., R. Pandi e E. B. Hawbolt. Austenite to ferrite transformation kinetics during continuous cooling. Office of Scientific and Technical Information (OSTI), dicembre 1994. http://dx.doi.org/10.2172/34419.
Robino, C. V., G. Knorovsky, R. C. Dykhuizen, D. O. MacCallum e B. K. Damkroger. Transformation kinetics in controlled-power and controlled-temperature cycle testing. Office of Scientific and Technical Information (OSTI), giugno 1998. http://dx.doi.org/10.2172/672114.
Bessho, Naoki. Final report: Kinetic characterization of 3D magnetic reconnection: A transformative step. Office of Scientific and Technical Information (OSTI), ottobre 2021. http://dx.doi.org/10.2172/1828283.
Ceder, Gerbrand, Nicola Marzari e Vidvuds Ozolins. Thermodynamics and Kinetics of Phase Transformations in Hydrogen Storage Materials. Office of Scientific and Technical Information (OSTI), agosto 2011. http://dx.doi.org/10.2172/1125004.
Turchi, P., L. Kaufman, Z. Liu e S. Zhou. THERMODYNAMICS AND KINETICS OF PHASE TRANSFORMATIONS IN PLUTONIUM ALLOYS - PART I. Office of Scientific and Technical Information (OSTI), agosto 2004. http://dx.doi.org/10.2172/895082.
Wolverton, Chris, e Vidvuds Ozolins. Thermodynamics and Kinetics of Phase Transformations in Energy Materials (Final Report). Office of Scientific and Technical Information (OSTI), giugno 2019. http://dx.doi.org/10.2172/1526112.