Letteratura scientifica selezionata sul tema "Internet des objets – Matériaux"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Internet des objets – Matériaux".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Internet des objets – Matériaux":
Gould, Sarah. "Venus d’ailleurs, matériaux et objets voyageurs". Artefact, n. 18 (15 giugno 2023): 353–60. http://dx.doi.org/10.4000/artefact.14139.
Grignaffini, Giorgio, e Eric Landowski. "L’aménagement d’un espace habitable". Les objets entre eux 29, n. 1 (12 aprile 2005): 17–22. http://dx.doi.org/10.7202/030612ar.
Calligaro, Thomas, e Claire Pacheco. "Un accélérateur de particules fait parler les œuvres d’art et les objets archéologiques". Reflets de la physique, n. 63 (ottobre 2019): 14–20. http://dx.doi.org/10.1051/refdp/201963014.
Carpentier, Vincent, e Benoît Labbey. "Que nous apprend l’archéologie des dépotoirs militaires sur le quotidien de la bataille de Normandie ?" Matériaux pour l’histoire de notre temps N° 147-148, n. 1 (22 febbraio 2024): 7–18. http://dx.doi.org/10.3917/mate.147.0007.
Morin, Michel. "La mort en bas âge d’un privilège : le cas des matériaux spécialement préparés qui n’entrent pas dans la construction d’un immeuble". Revue générale de droit 18, n. 2 (17 aprile 2019): 361–75. http://dx.doi.org/10.7202/1058705ar.
Chervet, Bernard. "De l’émergence des productions psychiques à la prise de conscience. Contribution à une épistémologie de la psychanalyse". Revue française de psychanalyse Vol. 87, n. 5 (2 novembre 2023): 1243–51. http://dx.doi.org/10.3917/rfp.875.1243.
Urrutiaguer, Daniel, e Laure de Verdalle. "Transfiguration théâtrale des objets par les sonorités et valeur esthétique". L’Annuaire théâtral, n. 56-57 (30 agosto 2016): 123–34. http://dx.doi.org/10.7202/1037333ar.
Bertrand, Loïc, Serge Cohen, Mathieu Thoury, Sophie David e Sebastian Schoeder. "IPANEMA, un laboratoire dédié à l’étude des matériaux anciens et patrimoniaux par méthodes synchrotron". Reflets de la physique, n. 63 (ottobre 2019): 21. http://dx.doi.org/10.1051/refdp/201963021.
Vincent, Diane. "Mésinterprétation, plagiat, insulte et diffamation : objets de litiges et matériaux de linguistes". Langage et société 132, n. 2 (2010): 35. http://dx.doi.org/10.3917/ls.132.0035.
Koch Dandolo, Corinna Ludovica, Maxime Lopez, Xueshi Bai e Vincent Detalle. "La tomographie en cohérence optique pour examiner les objets du patrimoine". Photoniques, n. 95 (gennaio 2019): 24–28. http://dx.doi.org/10.1051/photon/20199524.
Tesi sul tema "Internet des objets – Matériaux":
Mekki, Kaïs. "Gestion de l'information embarquée dans des matériaux communicants à l'aide de protocoles de réseaux de capteurs sans fil". Thesis, Université de Lorraine, 2016. http://www.theses.fr/2016LORR0034/document.
A new Internet of Things area is coming with communicating materials, which are able to provide diverse functionalities to users all along the product lifecycle. As example, it can track its own evolution which leads to gather helpful information. This new paradigm is fulfilled via the integration of specific electronic components into the product material. In this thesis, ultra-small wireless sensor nodes are used for concrete precast field. Indeed, storage of lifecycle information and data dissemination in communicating materials are very important issues. Therefore, this thesis provides a new protocol (USEE) for storing data by a systematic dissemination through the integrated sensor nodes. It guarantees that information could be retrieved in each piece of the concrete by intelligently managing data replication among each neighborhood of the sensor network. The protocol considers in the same set uniformity storage in the whole network, the data importance level, and the resource constraints of sensor nodes. Then, another new data retrieval protocol (RaWPG) is developed to extract the stored information. Castalia/OMNeT++ simulator is used to evaluate the performances of the proposed protocols
Contal, Emmanuel. "Synthèse de nano-objets lipidiques et leur fonctionnalisation interne par réaction « click »". Strasbourg, 2010. https://publication-theses.unistra.fr/public/theses_doctorat/2010/CONTAL_Emmanuel_2010.pdf.
The objective of this work was to synthesize polymerized micelles and Photo-polymerized Lipid Assemblies (PLA). Their post-functionalisation in the hydrophobic core was possible thanks to the use of functional lipids. To this end, lipids were synthesized possessing a polar head and a long carbon chain conferring their amphiphile properties, and a diacetylene moiety in the middle of the carbon chain that can be polymerized under UV irradiation (254 nm). When they were in aqueous solution, these synthetic lipids formed self-assemblies as spherical micelles. When carbon nanotubes were added to these micelles, lipids were spontaneously adsorbed on the carbon nanotubes surface to form self-assemblies represented as cylindrical hemi-micelles. These lipid constructs were stabilized during a step of polymerisation to furnish carbon nanotubes/ photo-polymerized lipid assemblies (CNT/PLA). An aqueous solution of nano-objects was obtained after extraction of theses self-assemblies from carbon nanotubes. The functionalisation in the hydrophobic core of non polymerized and polymerized micelles was realized with a fluorescent probe by “click” reaction. This methodology was then applied to various functionalisations of micelles or PLA
Wan, Hang. "Matériaux communicants : modélisation et gestion de la consommation d’énergie". Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0131.
With the popularization of the Internet of Things, more and more intelligent products appear in our daily life. The McBIM project (Materials communicating with the Building Information Modelling) aims to design a new type of “communicating concrete”: concrete elements equipped with embedded wireless sensor network (WSN). This communicating concrete can measure the physical environment, store the information and exchange data with BIM platforms. One objective is to demonstrate the usefulness of the concept over the whole building lifecycle and the energy management is one of the facing challenges. Meanwhile, the product, user information as well as the large amount of monitoring data bring challenges regarding data management. To solve both issues, this work proposes to couple the physical communicating concrete to an external, digital and intelligent system in order to extend network lifetime. In this thesis, these physical and digital parts are both studied. In the physical part, energy saving methods are reviewed, to understand how to extend the network lifetime. Network routing, in-network data processing and time synchronization are considered to build an energy model for periodic data collection. This energy model is validated with an Arduino-XBee based platform. The experiment shows that the analytic energy estimation model provides an approximate but accurate remaining energy level. It can be used online by nodes or remotely by user to the remaining energy. Energy-related data and collection modes can be managed by the digital part, based on a multi-agent system (MAS). The MAS can not only store monitoring data of communicating elements but also provide energy efficient data collection or organization strategies. Composition of communicating elements may happen in construction or exploitation lifecycle’s phase to reduce energy consumption. A recursive multi-agent architecture is proposed to meet high flexibility requirements. This multi-agent system is implemented on a 3D simulation platform to visualize the communicating concrete and verify the usefulness of our analytic energy model. The recursive multi-agent architecture provides energy efficiency solutions to extend network lifetime and respond to environmental changes
Mekki, Kaïs. "Gestion de l'information embarquée dans des matériaux communicants à l'aide de protocoles de réseaux de capteurs sans fil". Electronic Thesis or Diss., Université de Lorraine, 2016. http://www.theses.fr/2016LORR0034.
A new Internet of Things area is coming with communicating materials, which are able to provide diverse functionalities to users all along the product lifecycle. As example, it can track its own evolution which leads to gather helpful information. This new paradigm is fulfilled via the integration of specific electronic components into the product material. In this thesis, ultra-small wireless sensor nodes are used for concrete precast field. Indeed, storage of lifecycle information and data dissemination in communicating materials are very important issues. Therefore, this thesis provides a new protocol (USEE) for storing data by a systematic dissemination through the integrated sensor nodes. It guarantees that information could be retrieved in each piece of the concrete by intelligently managing data replication among each neighborhood of the sensor network. The protocol considers in the same set uniformity storage in the whole network, the data importance level, and the resource constraints of sensor nodes. Then, another new data retrieval protocol (RaWPG) is developed to extract the stored information. Castalia/OMNeT++ simulator is used to evaluate the performances of the proposed protocols
Arico, Cassandra. "Micro-supercondensateurs à porosité contrôlée pour des applications à forte densité d’énergie sur substrats rigide et flexible". Thesis, Lille 1, 2020. http://www.theses.fr/2020LIL1I055.
Continuous development and further miniaturization of electronic devices greatly stimulate the research for miniaturized and compact electrochemical energy storage (EES) devices, allowing thus the development of autonomous, sustainable and connected devices. Small footprint storage sources should be sufficient efficient in terms of power, autonomy and lifespan and fixed directly on chip. To fulfil the requirements, the combination of a micro-battery (μ-Bat) with a micro- supercapacitor (μ-SC) would constitute an ideal EES microdevice where μ-Bat is dedicated to long-term applications and μ-SC ensures power demand. As promising electrode candidate for high power microdevice, carbide-derived carbons (CDCs) have been identified to load to important capacitance gains. In addition, niobium oxide (Nb2O5) stores higher levels of charges and offers the prospect of achieving energy densities of Li-ion battery materials but with the ability to operate at high power. In the present study, Nb2O5 thin films were deposited on silicon wafer by sputtering and crystallized by a rapid thermal annealing into an orthorhombic phase T-Nb2O5. We investigated porous T-Nb2O5 in which rapid insertion of lithium throughout the entire material. Then, titanium carbide (TiC) thin films were deposited on silicon wafer by sputtering and partial chlorinated into strongly adherent TiC-CDC films. Hybrid micro-supercapacitors CDC/Nb2O5 were successfully prepared and characterized in 1M LiClO4 (EC/DMC : 1/1). Finally, direct laser writing onto KaptonTM of Nb2O5 and carbon-based electrodes open the way for the design of flexible micro-supercapacitors
Dinh, Khac Huy. "Fabrication of solid state Micro-Supercapacitors based on transition metal nitride thin films for powering the Internet of Things". Electronic Thesis or Diss., Université de Lille (2022-....), 2023. https://pepite-depot.univ-lille.fr/ToutIDP/EDENGSYS/2023/2023ULILN021.pdf.
The rapid growth of Internet of Things (IoT) applications has led in an increased demand for energy storage devices. Micro-supercapacitors (MSCs) have emerged as promising candidates for high-speed applications due to their high-rate capabilities, long cycle life and environmental friendliness. However, the main challenge to be addressed for the widespread industrial use of MSCs is their relatively low energy density. To address this issue, various solutions have been explored to increase the capacitance or the cell voltage by playing with the electrolyte used, electrode materials and device topologies to achieve high-performance MSCs. This work focuses on the investigation of thin film electrode materials prepared by magnetron sputtering deposition. In particular, vanadium tungsten nitride (VWN) and ruthenium nitride (RuN) have been investigated as efficient pseudocapacitive electrode materials. This work was carried out in the frame of the CAMISOL project selected by the Lille university through the PEARL program (Program for EArly-stage Researchers in Lille) cofunded by the European Commission, where the motivation was to fabricate solid-state VN (or VWN) // RuN asymmetric micro-supercapacitors (AMSC). VWN thin films were synthesized using co-sputtering and nanolaminate approaches and demonstrated excellent performance challenging the best multicatonic materials reported for MSCs. Advanced characterization mapping techniques were used to explore the correlation between the structural, electrical, mechanical, and electrochemical properties of the films. This approach offers new perspectives and provides a powerful characterization tool for the next generation of electrochemical materials fabricated by thin film deposition methods at Lille University.In the following part of the thesis, RuN films were investigated as efficient electrode materials, and solid-state VN // RuN AMSC was presented as a proof of concept. Sputtering parameters were carefully optimized to maximize the film porosity while maintaining high electrical conductivity. Various advanced techniques were employed to reveal the complexity of the structure and charge storage mechanism of RuN films. Taking advantage from the complementary working window of VN and RuN films in a 1M KOH aqueous electrolyte, the cell voltage of the VN // RuN AMSC device was significantly increased, reaching up to 1.15 V. As a result, the VN // RuN AMSC exhibited one of the highest areal energy densities reported so far for AMSCs based on transition metal nitride thin films. Finally, the study of the use of solid-state electrolyte, PVA/KOH hydrogel electrolyte and ionic liquids in the fabrication of all-solid-state AMSCs was presented
Lemoine, Frédéric. "Internet des Objets centré service autocontrôlé". Thesis, Paris, CNAM, 2019. http://www.theses.fr/2019CNAM1235/document.
In the digital era, the number of connected objects continues to grow and diversify. To support this increasing complexity, we wanted to bring a maximum of automatisms to the Internet of Things in order to guarantee end-to-end quality of service (QoS). To do this, a self-controlled service component is proposed to integrate the object into the digital ecosystem. Thanks to the calibration of each service, which makes it possible to know the behaviour, an automated composition becomes possible. We have illustrated the feasibility of our approach on a case study. We also have shown how connected objects can assemble themselves, cooperating to achieve a common objective, while meeting global QoS requirements
Lemoine, Frédéric. "Internet des Objets centré service autocontrôlé". Electronic Thesis or Diss., Paris, CNAM, 2019. http://www.theses.fr/2019CNAM1235.
In the digital era, the number of connected objects continues to grow and diversify. To support this increasing complexity, we wanted to bring a maximum of automatisms to the Internet of Things in order to guarantee end-to-end quality of service (QoS). To do this, a self-controlled service component is proposed to integrate the object into the digital ecosystem. Thanks to the calibration of each service, which makes it possible to know the behaviour, an automated composition becomes possible. We have illustrated the feasibility of our approach on a case study. We also have shown how connected objects can assemble themselves, cooperating to achieve a common objective, while meeting global QoS requirements
Gyrard, Amélie. "Concevoir des applications internet des objets sémantiques". Thesis, Paris, ENST, 2015. http://www.theses.fr/2015ENST0018/document.
According to Cisco's predictions, there will be more than 50 billions of devices connected to the Internet by 2020.The devices and produced data are mainly exploited to build domain-specific Internet of Things (IoT) applications. From a data-centric perspective, these applications are not interoperable with each other.To assist users or even machines in building promising inter-domain IoT applications, main challenges are to exploit, reuse, interpret and combine sensor data.To overcome interoperability issues, we designed the Machine-to-Machine Measurement (M3) framework consisting in:(1) generating templates to easily build Semantic Web of Things applications, (2) semantically annotating IoT data to infer high-level knowledge by reusing as much as possible the domain knowledge expertise, and (3) a semantic-based security application to assist users in designing secure IoT applications.Regarding the reasoning part, stemming from the 'Linked Open Data', we propose an innovative idea called the 'Linked Open Rules' to easily share and reuse rules to infer high-level abstractions from sensor data.The M3 framework has been suggested to standardizations and working groups such as ETSI M2M, oneM2M, W3C SSN ontology and W3C Web of Things. Proof-of-concepts of the flexible M3 framework have been developed on the cloud (http://www.sensormeasurement.appspot.com/) and embedded on Android-based constrained devices
Gyrard, Amélie. "Concevoir des applications internet des objets sémantiques". Electronic Thesis or Diss., Paris, ENST, 2015. http://www.theses.fr/2015ENST0018.
According to Cisco's predictions, there will be more than 50 billions of devices connected to the Internet by 2020.The devices and produced data are mainly exploited to build domain-specific Internet of Things (IoT) applications. From a data-centric perspective, these applications are not interoperable with each other.To assist users or even machines in building promising inter-domain IoT applications, main challenges are to exploit, reuse, interpret and combine sensor data.To overcome interoperability issues, we designed the Machine-to-Machine Measurement (M3) framework consisting in:(1) generating templates to easily build Semantic Web of Things applications, (2) semantically annotating IoT data to infer high-level knowledge by reusing as much as possible the domain knowledge expertise, and (3) a semantic-based security application to assist users in designing secure IoT applications.Regarding the reasoning part, stemming from the 'Linked Open Data', we propose an innovative idea called the 'Linked Open Rules' to easily share and reuse rules to infer high-level abstractions from sensor data.The M3 framework has been suggested to standardizations and working groups such as ETSI M2M, oneM2M, W3C SSN ontology and W3C Web of Things. Proof-of-concepts of the flexible M3 framework have been developed on the cloud (http://www.sensormeasurement.appspot.com/) and embedded on Android-based constrained devices
Libri sul tema "Internet des objets – Matériaux":
Piette-Coudol, Thierry. Les objets connectés: Sécurité juridique et technique. Paris: Lexis Nexis, 2015.
Zbinden, Geoffrey. L'internet des objets: Une réponse au réchauffement climatique. Paris: Cygne, 2010.
Benghozi, Pierre-Jean. L'internet des objets: Quels enjeux pour l'Europe? = he internet of things : what challenges for Europe? [Paris]: Éd. de la Maison des sciences de l'homme, 2009.
Valmont, Joséphine. Autour de Récup' & Brocante: Objets détournés, Matériaux, Éléments décoratifs. Charles Massin, 2008.
BOUHAI. Internet des Objets: Evolutions et Innovations. ISTE Editions Ltd., 2017.
Li, Tao, e Deji Akinwande. Emerging 2D Materials and Devices for the Internet of Things: Information, Sensing and Energy Applications. Elsevier, 2020.
Knieps, Günter, e Volker Stocker. Future of the Internet: Innovation, Integration and Sustainability. Nomos Verlagsgesellschaft, 2019.
Mahalle, Parikshit N., Gitanjali Rahul Shinde, Nancy Ambritta P e Arvind Vinayak Deshpande. Convergence of Internet of Things and Cloud for Smart Computing. Taylor & Francis Group, 2021.
Mahalle, Parikshit N., Gitanjali Rahul Shinde, Nancy Ambritta P e Arvind Vinayak Deshpande. Convergence of Internet of Things and Cloud for Smart Computing. Taylor & Francis Group, 2021.
Goes, João. Circuits and Systems for the Internet of Things: CAS4IoT. River Publishers, 2022.
Capitoli di libri sul tema "Internet des objets – Matériaux":
Benghozi, Pierre-Jean, Sylvain Bureau e Françoise Massit-Folléa. "Defining the Internet of Things". In L’Internet des objets, 91–99. Éditions de la Maison des sciences de l’homme, 2009. http://dx.doi.org/10.4000/books.editionsmsh.97.
Benghozi, Pierre-Jean, Sylvain Bureau e Françoise Massit-Folléa. "Technical evolution of the Internet of Things". In L’Internet des objets, 111–20. Éditions de la Maison des sciences de l’homme, 2009. http://dx.doi.org/10.4000/books.editionsmsh.99.
Guerra, Maria Filomena. "La circulation des objets en or". In Circulation et provenance des matériaux dans les sociétés anciennes, 161–74. Editions des archives contemporaines, 2014. http://dx.doi.org/10.17184/eac.4096.
Benghozi, Pierre-Jean, Sylvain Bureau e Françoise Massit-Folléa. "The prominence and challenges of the Internet of Things". In L’Internet des objets, 101–10. Éditions de la Maison des sciences de l’homme, 2009. http://dx.doi.org/10.4000/books.editionsmsh.98.
Callu, Agnès. "L’histoire du temps proche : évolution des champs, objets et matériaux". In Le Mai 68 des historiens, 261–74. Presses universitaires du Septentrion, 2018. http://dx.doi.org/10.4000/books.septentrion.21284.
SERVIAN, Claudie. "Les performances dansées d’Yvonne Rainer". In Performance dans les Amériques, 31–42. Editions des archives contemporaines, 2024. http://dx.doi.org/10.17184/eac.8113.
ERTZ, Myriam, Shouheng SUN, Émilie BOILY, Gautier Georges Yao QUENUM, Kubiat PATRICK, Yassine LAGHRIB, Damien HALLEGATTE, Julien BOUSQUET e Imen LATROUS. "Les produits augmentés : la contribution de l’industrie 4.0 à la consommation durable". In Le marketing au service du développement durable, 277–300. ISTE Group, 2021. http://dx.doi.org/10.51926/iste.9036.ch14.
KHALIL, Ahmad, Nader MBAREK e Olivier TOGNI. "Adaptation du contrôle d’accès pour la sécurité de l’IoT". In La gestion et le contrôle intelligents des performances et de la sécurité dans l’IoT, 169–204. ISTE Group, 2022. http://dx.doi.org/10.51926/iste.9053.ch7.
Lemos, Esdras Pereira, e Maria de Fátima Vilhena da Silva. "CAPÍTULO 8 - INUNDAÇÕES E ALAGAMENTOS NO MUNICÍPIO DE BELÉM-PARÁ: UMA PRODUÇÃO DE VÍDEO BASEADO EM RISCOS DE DESASTRES NATURAIS". In I WEBINÁRIO PPGGRD-UFPA, 92–106. Even3 Publicações, 2023. http://dx.doi.org/10.29327/5162993.1-8.
HONBA HONBA, Cédric. "Sémiotique et archive d’images". In Corpus audiovisuels, 125–46. Editions des archives contemporaines, 2022. http://dx.doi.org/10.17184/eac.5705.
Atti di convegni sul tema "Internet des objets – Matériaux":
Haboyan, Razmik. "La Grande Réinitialisation : projet, symptôme ou promesse ? La transition comme une arme de guérilla sémiotique". In Actes du congrès de l’Association Française de Sémiotique. Limoges: Université de Limoges, 2024. http://dx.doi.org/10.25965/as.8487.
Plutniak, Sébastien. "L’automatisation éditoriale da la publication des données. Des tirés-à-part aux data journals en archéologie (1950-2000)". In Séminaire PéLiAS (Périodiques, Littérature, Arts, Sciences). MSH Paris-Saclay Éditions, 2023. http://dx.doi.org/10.52983/qbtj3499.
Monteiro, Caique Cahon. "Experiência estética e cultura digital: Novos fluxos na exibição da arte". In LINK 2021. Tuwhera Open Access, 2021. http://dx.doi.org/10.24135/link2021.v2i1.67.g58.
Rapporti di organizzazioni sul tema "Internet des objets – Matériaux":
Aubry, Philippe, Nicolas Boileau, Marie Briandy, Marie-Christine Chauvat, Sandrine Conin e Éric Min-Tung. Rapport sur le chantier IdRef en Normandie. Normandie Université, dicembre 2023. http://dx.doi.org/10.51203/rapport.nu.000003.