Bibliografie tematiche / Insulating polymer materials

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Insulating polymer materials"

Autore: Grafiati

Pubblicato: 5 ottobre 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Insulating polymer materials".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Insulating polymer materials"

Danikas, M., e S. Morsalin. "A Short Review on Polymer Nanocomposites for Enameled Wires: Possibilities and Perspectives". Engineering, Technology & Applied Science Research 9, n. 3 (8 giugno 2019): 4079–84. http://dx.doi.org/10.48084/etasr.2678.

Testo completo

Abstract (sommario):

Polymer nanocomposites constitute a new generation of insulating materials, capable of offering better electrical, thermal and mechanical properties. Past research indicated that such materials may replace conventional polymers for a variety of industrial high voltage applications. In the present paper, polymer nanocomposites are investigated regarding the insulation of enameled wires. Possible nanocomposite candidates are discussed.

Gli stili APA, Harvard, Vancouver, ISO e altri

Liu, Cong, Jian Hao, Yanqing Li e Ruijin Liao. "Fabrication of ZnO-Al2O3-PTFE Multilayer Nano-Structured Functional Film on Cellulose Insulation Polymer Surface and Its Effect on Moisture Inhibition and Dielectric Properties". Polymers 11, n. 8 (19 agosto 2019): 1367. http://dx.doi.org/10.3390/polym11081367.

Testo completo

Abstract (sommario):

After a century of practice, cellulose insulating polymer (insulating paper/pressboard) has been shown to be one of the best and most widely used insulating materials in power transformers. However, with the increased voltage level of the transformer, research has focused on improving the insulation performance of the transformer’s cellulose insulation polymer. Considering the complex environment of the transformer, it is not enough to improve the single performance of the insulating polymer. In this study, a nano-structured ZnO-Al2O3-PTFE (polytetrafluoroethylene) multifunctional film was deposited on the surface of insulating pressboard by radio frequency (RF) magnetron sputtering. The effect of the multilayered ZnO-Al2O3-PTFE functional film on the dielectric and water contact angle of the cellulose insulating polymer was investigated. The scanning electron microscopy/energy dispersive spectrometry (SEM/EDS) showed that the nano-structured ZnO-Al2O3-PTFE functional film was successfully deposited on the cellulose insulation pressboard surface. The functional film presented an obvious stratification phenomenon. By analyzing the result of the contact angle, it was found that the functional film shields the hydroxyl group of the inner cellulose and improves hydrophobicity. The AC breakdown field strength of the treated samples was obviously increased (by 12 to ~17%), which means that the modified samples had a better dielectric insulation performance. This study provides a surface modification method to comprehensively improve electrical properties and the ability to inhibit the moisture of the cellulose insulating polymer, used in a power transformer.

Gli stili APA, Harvard, Vancouver, ISO e altri

BANACKA, Natalia, Dariusz SOKOŁOWSKI e Mirosław SZCZEPANIK. "TESTING PROPERTIES OF SELECTED POLYMER MATERIALS FOR ABLATIVE LAYERS IN ROCKET SOLID FUEL MOTORS". PROBLEMY TECHNIKI UZBROJENIA 168, n. 1 (16 aprile 2024): 113–31. http://dx.doi.org/10.5604/01.3001.0054.4796.

Testo completo

Abstract (sommario):

The article presents basic information about using thermal insulation in rocket solid fuel motors. A breakdown of the insulating material is given with examples of polymers used to protect motor internal surface at combustion of fuel and its hightemperature products. Tests were carried out in the work for selected polymer materials used at production of rocket solid fuel motors, and the polymer was indicated with the best ablative properties. The method of testing consisted of physicochemical and mechanical tests. Performing DSC and TG measurements made it possible to observe the phase transformations of a given material under the influence of temperature changes.

Gli stili APA, Harvard, Vancouver, ISO e altri

Eze, A. H., e Á. Lakatos. "Applications of thermal insulation materials by aircraft". Journal of Physics: Conference Series 2628, n. 1 (1 ottobre 2023): 012018. http://dx.doi.org/10.1088/1742-6596/2628/1/012018.

Testo completo

Abstract (sommario):

Abstract Lightweight materials such as microfiber insulation or polymer foam are typically used to insulate cars and aircraft. But here, too, the use of state-of-the-art “super-insulating” materials is a valid answer. Vacuum insulation panels also serve as reliable insulators for electric vehicles. In this study, we will analyze in depth the potential uses for aerogels, polymer foams, and microfiber insulation. In addition, their thermal properties are briefly outlined, with a special focus on thermal conductivity and compressibility. Finding the right solution for the aircraft industry is critical. To meet increasingly stringent requirements, aircraft materials must meet several criteria, including lightweight, minimal noise, and insulation from the heat.

Gli stili APA, Harvard, Vancouver, ISO e altri

IMAI, Takahiro, e Toshikatsu TANAKA. "Advances in Polymer Nanocomposite Insulating Materials". Journal of The Institute of Electrical Engineers of Japan 134, n. 3 (2014): 161–64. http://dx.doi.org/10.1541/ieejjournal.134.161.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Tanaka, Toshikatsu. "Polymer nanocomposite innovating on insulating materials". IEEJ Transactions on Electrical and Electronic Engineering 4, n. 1 (gennaio 2009): 8–9. http://dx.doi.org/10.1002/tee.20348.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Mackevich, J., e M. Shah. "Polymer outdoor insulating materials. Part I: Comparison of porcelain and polymer electrical insulation". IEEE Electrical Insulation Magazine 13, n. 3 (maggio 1997): 5–12. http://dx.doi.org/10.1109/57.591510.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Horbachova, Oleksandra, Yuriy Tsapko, Yelena Tsarenko, Serhii Mazurchuk e Ivan Kasianchuk. "Justification of the Wood Polymer Material Application Conditions". Journal of Engineering Sciences 10, n. 2 (2023): C49—C55. http://dx.doi.org/10.21272/jes.2023.10(2).c6.

Testo completo

Abstract (sommario):

The production of heat-insulating materials based on wood was analyzed in this paper. The expediency and efficiency of using wood waste were established. A study of the operational properties of the sample obtained from wood shavings polymerized with mixtures of polyester and epoxy resins was carried out. It was proven that the process’s primary regulator is the material’s density and porosity. Also, an increase in humidity and wetting reduces heat-insulating indicators. Based on thermophysical dependences, the thermal insulation properties of the samples were calculated. Moreover, it was established that the thermal conductivity does not exceed 0.21·10–6 m2/s, and the thermal conductivity of the sample – 2.85·10–3 W/(m·K). Therefore, these products can be classified as heat-insulating materials. A through-thickness compressive strength study showed that the wood shavings and polyester resin material are more fragile, and the strength limit was reduced by more than 1.2 times compared to the epoxy resin-based material. The moisture absorption results showed that a heat-insulating product made of shavings polymerized with polyester resin. Moisture absorption was 5 % after 90 days of exposure to water. On the other hand, the heat-insulating products made of shavings with epoxy resin of 4.41 % showed their resistance to moisture absorption.

Gli stili APA, Harvard, Vancouver, ISO e altri

Xu, M., G. C. Montanari, D. Fabiani, L. A. Dissado e A. Krivda. "A New Ultra Fast Conduction Mechanism in Insulating Polymer Nanocomposites". Journal of Nanotechnology 2011 (2011): 1–11. http://dx.doi.org/10.1155/2011/985801.

Testo completo

Abstract (sommario):

A brand new phenomenon, namely, electrical conduction via soliton-like ultra fast space charge pulses, recently identified in unfilled cross-linked polyethylene, is shown for the first time to occur in insulating polymer nanocomposites and its characteristics correlated with the electromechanical properties of nanostructured materials. These charge pulses are observed to cross the insulation under low electrical field in epoxy-based nanocomposites containing nanosilica particles with relative weights of 1%, 5%, 10%, and 20% at speeds orders of magnitude higher than those expected for carriers in insulating polymers. The characteristics of mobility, magnitude and repetition rate for both positive and negative charge pulses are studied in relation to nanofiller concentration. The results show that the ultra fast charge pulses (packets) are affected significantly by the concentration of nanoparticles. An explanation is presented in terms of a new conduction mechanism where the mechanical properties of the polymer and movement of polymer chains play an important role in the injection and transport of charge in the form of pulses. Here, the charge transport is not controlled by traps. Instead, it is driven by the contribution of polarization and the resultant electromechanical compression, which is substantially affected by the introduction of nanoparticles into the base polymer.

Gli stili APA, Harvard, Vancouver, ISO e altri

Huang, Fang. "Technology of Heat-Resistant & High Voltage-Resistant Insulation Materials Based on Polymer Composite". Advanced Materials Research 391-392 (dicembre 2011): 340–44. http://dx.doi.org/10.4028/www.scientific.net/amr.391-392.340.

Testo completo

Abstract (sommario):

High voltage insulation of the heat-resistant polymer composite material mainly composed of synthetic resin matrix, reinforcing materials, inorganic fillers, pigments and other components. In addition, according to the technical and performance requirements will be added in the resin matrix curing agent, thickener, mold release agents, solvents and so on. By different proportions of the resin matrix and filler and other additives, under conditions in certain insulating polymer composites were prepared to explore the relationship between components, the best formula and the ideal insulation material.

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Insulating polymer materials"

Sim, Alec. "Unified model of charge transport in insulating polymeric materials". Thesis, Utah State University, 2014. http://pqdtopen.proquest.com/#viewpdf?dispub=3606878.

Testo completo

Abstract (sommario):

Presented here is a detailed study of electron transport in highly disordered insulating materials (HDIM). Since HDIMs do not lend themselves to a lattice construct, the question arises: How can we describe their electron transport behavior in a consistent theoretical framework? In this work, a large group of experiments, theories, and physical models are coalesced into a single formalism to better address this difficult question. We find that a simple set of macroscopic transport equations--cast in a new formalism--provides an excellent framework in which to consider a wide array of experimentally observed behaviors. It is shown that carrier transport in HDIMs is governed by the transport equations that relate the density of localized states (DOS) within the band gap and the occupation of these states through thermal and quantum interactions. The discussion is facilitated by considering a small set of simple DOS models. This microscopic picture gives rise to a clear understanding of the macroscopic carrier transport in HDIMs. We conclude with a discussion of the application of this theoretical formalism to four specific types of experimental measurements employed by the Utah State University space environments effects Materials Physics Group.

Gli stili APA, Harvard, Vancouver, ISO e altri

Kashfipour, Marjan Alsadat. "Thermal Conductivity Enhancement Of Polymer Based Materials". University of Akron / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=akron156415885613422.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Castrovilli, Matteo. "Characterization of the dipole processes of insulating materials used in aeronautical cables". Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021.

Cerca il testo completo

Abstract (sommario):

The studies of this thesis are focused on aeronautic Polymers materials and their dielectric properties, in order to analyze the relaxation times for the materials of interest under an applied electric field, and in order to increase the work operations of the Novocontrol dielectric spectroscopy measurement machine available in the LAPLACE laboratory. In this context, the research team DSF in collaboration with MDCE, from LAPLACE laboratory, has developed in 2019 a numerical model taking into account the polar mechanisms of the polymer insulators used in the aeronautic industry. However, this theoretical model, is not yet validated. Therefore the aim of this thesis, is to make it possible to validate this theoretical model, then by a series of measurements with dielectric spectroscopy(D.S.) for different materials of interest, different frequencies and temperatures; the measurements consist on the measuration of the phase difference between current and voltage applied to the samples, in order to calculate the permittivity values under different working conditions. The permittivity trend is therefore analyzed to find the polar relaxation under thermoelectrical stresses, and the model will then have to calculate the current density (and from the current density is directly calculated the dissipated energy) of the measured data with dielectry spectroscopy, and the validation will be done if the future measurement values of the current density correspond to the calculated one by the model. For this reasons, the main part of the work for this thesis consist in measurements trought the dielectric spectroscopy (using the following polar materials: Polyimide(PI) and PTFE ) under different working conditions and analyze the results in order to evidence polarization phenomena, because the purpose of this part of the validation process is to have the better polar relaxation data for the future work.

Gli stili APA, Harvard, Vancouver, ISO e altri

Neumann, Andreas C. "Electronic transport in highly resistive materials in strong magnetic fields :nonlinear dynamics in semi-insulating GaAs and magnetoresistance of carbon-black polymer composites". Doctoral thesis, Universite Libre de Bruxelles, 1997. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/212185.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Adetunji, Oludurotimi Oluwaseun. "The nature of electronic states in conducting polymer nano-networks". Columbus, Ohio : Ohio State University, 2008. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1206218304.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Silva, Igor. "Propriétés des matériaux isolants pour application dans les appareillages moyenne tension à tension continue". Electronic Thesis or Diss., Université Grenoble Alpes, 2024. http://www.theses.fr/2024GRALT043.

Testo completo

Abstract (sommario):

Les récentes avancées dans la technologie du courant continu, du côté du transport à haute tension et de la consommation à basse tension, ont propulsé le courant continu de moyenne tension (MVDC) au premier plan. Cette thèse explore les propriétés isolantes en courant continu de deux matériaux couramment utilisés dans l'équipement de distribution : de l'époxy chargé en micro-silice et le silicone elastomère.Dans une configuration monocouche, chaque matériau a fait l'objet d'une enquête approfondie, mettant l'accent sur les caractéristiques de sorption d'eau et la conduction électrique. Des mesures de courant ont été effectuées pour analyser la conduction dans divers niveaux de champs, à différentes températures et conditions d'absorption d'eau. De plus, la méthode Laser Pressure Pulse (LIPP) a été utilisée pour des mesures de charge d'espace en tant que technique complémentaire. L'étude s'est étendue à une configuration bicouche, combinant les deux matériaux, nous permettant ainsi de confirmer un modèle prédisant les propriétés du multicouche et sa distribution de champs en fonction des valeurs des monocouches.La conduction en courant continu dans l'époxy a montré une forte dépendance à l'absorption d'eau, l'humidité influençant la non-linéarité et modifiant le mécanisme de conduction. À l'inverse, le silicone a démontré une conduction limitée par l'électrode, avec des variations de courant liées à la sorption d'eau par le biais d'un mécanisme limité par saturation. Dans une configuration bicouche hypothétique, où l'époxy représente un manchon et le silicone sert de terminaison de câble, le champ est censé se concentrer dans l'époxy dans des environnements secs, passant au silicone à mesure que l'humidité augmente. La thèse se conclut par des discussions sur les stratégies de sélection des matériaux et la conception de configurations multicouches
Recent advancements in direct-current technology from the high-voltage transport and low-voltage consumption have brought medium-voltage DC (MVDC) to the forefront. This thesis delves into the insulating DC properties of two commonly used materials in distribution equipment: epoxy filled with silica and silicone rubber.In a monolayer configuration, each material underwent extensive investigation, focusing on water sorption characteristics and electrical conduction. Current measurements were conducted to analyze conduction under various fields, temperatures, and water uptake conditions. Additionally, the Laser Pressure Pulse (LIPP) method was employed for space charge measurements as a complementary technique. The study extended to a bilayer configuration, combining both materials, with insights from monolayer experiments informing the properties of the bilayer and predicting field distribution.The DC conduction in epoxy exhibited high dependence on water absorption, with moisture influencing non-linearity and altering the conduction mechanism. Conversely, silicone demonstrated electrode-limited conduction, with current variations tied to water sorption through a saturation-limited mechanism. In a hypothetical bilayer configuration, where epoxy represents a type-C bushing and silicone serves as the cable termination, the field is expected to concentrate in the epoxy in dry environments, shifting to silicone as humidity increases. The thesis concludes with discussions on material selection strategies and the design of multi-layer configurations

Gli stili APA, Harvard, Vancouver, ISO e altri

Gawryla, Matthew Daniel. "Low Density Materials through Freeze-Drying:Clay Aerogels and Beyond…". Case Western Reserve University School of Graduate Studies / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=case1247013426.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Sim, Alec. "Unified Model of Charge Transport in Insulating Polymeric Materials". DigitalCommons@USU, 2013. https://digitalcommons.usu.edu/etd/2044.

Testo completo

Abstract (sommario):

Charge transport, charging, and subsequent electrostatic discharge due to interactions with the space environment are primary concerns of spacecraft designers. Developing a physical understanding of the interactions of charge with the multitude of materials that spacecraft are composed of is a critical step in understanding and mitigating both short-term and long-term spacecraft degradation. In particular, the study of charge transport in highly insulating materials is critical as they store charge longer, with higher capacity, and with greater destructive capability than other materials.The Utah State University Materials Physics Group, with the funding of the NASA James Webb Space Telescope project and Rocky Mountain Space Consortium, have developed a complete and consistent theoretical model that predicts short-term and long-term storage capabilities based on physical material parameters. This model is applicable across a wide range of experimental systems designed to test specific behaviors that characterize charging phenomena.Modeling and understanding the complex relationships between the spacecraft and its surroundings are fundamentally based on detailed knowledge of how individual materials store and transport charge. The ability to better understand these effects will help make exploring the edges of the universe more stable, reliable, and economic.

Gli stili APA, Harvard, Vancouver, ISO e altri

Elbuzedi, Mohamed. "Material study and properties of polymers used in composite high voltage insulators". Thesis, Stellenbosch : Stellenbosch University, 2007. http://hdl.handle.net/10019.1/17749.

Testo completo

Abstract (sommario):

Thesis (MSc)--University of Stellenbosch, 2007.
ENGLISH ABSTRACT: Silicone rubber, particularly poly(dimethylsiloxane) (PDMS), has been increasingly used in the manufacture of outdoor high voltage insulators in the recent years. PDMS offers several advantages that make it suitable for outdoor use, such as low weight, a hydrophobic surface, stability, and excellent performance in heavily polluted environments. PDMS surfaces can, however, become progressively hydrophilic due to surface oxidation caused by corona discharge, UV radiation and acid rain. In this study, PDMS samples of controlled formulations as well as six commercial insulator materials four PDMS based and two ethylene propylene diene monomer (EPDM) based were exposed to various accelerated weathering conditions for various periods of time in order to track changes in the material over time. The ageing regimes developed and used to simulate the potential surface degradation that may occur during in-service usage included needle corona and French corona ageing, thermal ageing, UV-B irradiation (up to 8000 hours) and acid rain (up to 200 days). Both the chemical and physical changes in the materials were monitored using a wide range of analytical techniques, including: static contact angle measurements (SCA), optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), gas chromatography (GC), gas chromatography/mass spectroscopy (GC/MS), size-exclusion chromatography (SEC), Fourier-transform infrared photoacoustic spectroscopy (FTIR-PAS) and slow positron beam techniques (PAS). A low molecular weight (LMW) uncrosslinked PDMS model compound was used to further study the chemical effects of corona exposure on PDMS materials. PDMS showed far better performance than EPDM, in terms of resistance to the various ageing regimes and “hydrophobicity recovery”.
AFRIKAANSE OPSOMMING: Silikoonrubber, spesifiek polidimetielsiloksaan (PDMS), is gedurende die afgelope paar jaar toenemend gebruik in die vervaardiging van buitelughoogspanningisolators. PDMS het baie voordele vir gebruik in elektriese isolators soos ‘n laer massa, ŉ hidrofobiese oppervlak, stabiliteit en uitstekende werking in hoogsbesoedelde omgewings. Die hidrofobiese oppervlakte kan egter gelydelik hidrofilies word weens oppervlakoksidasie as gevolg van korona-ontlading, UV-bestraling en suurreën. In hierdie studie is PDMS monsters van verskillende samestellings sowel as ses kommersiële isolators (vier PDMS en twee etileenpropileenrubber (EPDM)) blootgestel aan verskillende versnelde weersomstandighede vir verskillende periodes om die veranderinge in die materiale te monitor. Die verskillende materiale is gerangskik volgens hulle werking oor ‘n periode van tyd. Dit het ook ‘n geleentheid gebied om die eienskappe van die verskillende samestellings te bestudeer. Die tegnieke wat ontwikkel is om die moontlike oppervlakdegradasie te simuleer, het naald-korona, “French” korona, UVB-bestraling (tot 8000 uur) en suurreën (tot 200 dae) ingesluit. Beide die chemiese en die fisiese veranderinge in die materiale is gemonitor met behulp van verskeie tegnieke soos statiese kontakhoekbepaling, optiese mikroskopie, skandeerelektronmikroskopie, energieverspreidingsspektroskopie, gaschromatografie, grootte-uitsluitingschromatografie, foto-akoestiese Fouriertransforminfrarooi (PASFTIR) en stadige-positronspektroskopie (PAS). ŉ Lae molekulêre massa PDMS modelverbinding is gebruik om die chemiese effek van korona te bestudeer. Die PDMS materiale het baie beter vertoon teenoor die EPDM materiale in terme van hulle herstel van hidrofobisiteit.

Gli stili APA, Harvard, Vancouver, ISO e altri

Sokotun, Zh, e O. Koshelieva. "Evaluation durability of polymeric insulating material of electric cables". Thesis, Київський національний університет технологій та дизайну, 2017. https://er.knutd.edu.ua/handle/123456789/6714.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Insulating polymer materials"

Nelson, J. Keith. Dielectric polymer nanocomposites. New York: Springer, 2010.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Neumann, Andreas. Electronic transport in highly resistive materials in strong magnetic fields: Nonlinear dynamics in semi-insulating GaAs and magnetoresistance of carbon-black polymer composites. Konstanz: Hartung-Gorre, 1997.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Stuetzer, Otmar M. Correlation of electrical reactor cable failure with materials degradation. Washington, DC: Electrical Engineering Instrumentation and Control Branch, Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1986.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

IEEE Power Engineering Society. Insulated Conductors Committee., Institute of Electrical and Electronics Engineers. e IEEE Standards Board, a cura di. IEEE recommended practice for test methods for determination of compatibility of materials with conductive polymeric insulation shields and jackets. New York, N.Y., USA: Institute of Electrical and Electronics Engineers, 1996.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Nelson, J. Keith. Dielectric Polymer Nanocomposites. Springer, 2014.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Nelson, J. Keith. Dielectric Polymer Nanocomposites. Springer, 2010.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Johnson, D. I. The Effects of Radiation on the Mechanical Properties of Polymers Used as Electrical Cable Insulation and Jacketing Materials (Reports). AEA Technology Plc, 1989.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Capitoli di libri sul tema "Insulating polymer materials"

Wang, Zhengzhou, Xiaoyan Li e Lei Liu. "Flame Retarded Polymer Foams for Construction Insulating Materials". In Flame Retardant Polymeric Materials, 235–58. Boca Raton : CRC Press, [2020] | Series: Series in materials science and engineering: CRC Press, 2019. http://dx.doi.org/10.1201/b22345-12.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Ogura, K., e H. Shiigi. "Conducting-Insulating Polymer Composites: Selectively Sensing Materials for Humidity and CO2". In ACS Symposium Series, 88–102. Washington, DC: American Chemical Society, 2002. http://dx.doi.org/10.1021/bk-2003-0832.ch007.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Zhu, Yuanwei, Peng Wei, Zichao Shen, Huize Cui, Yu Jing, Dongfan Li, Zihao Wang, Dongri Xie, Guanghao Lu e Shengtao Li. "Charge Traps Depended Space Charge Dynamics and Electrical Breakdown Characteristics of Polymer Insulating Materials". In Lecture Notes in Electrical Engineering, 1077–86. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-31676-1_101.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Zha, Jun-Wei, Ming-Sheng Zheng, Wei-Kang Li, George Chen e Zhi-Min Dang. "Polypropylene Insulation Materials for HVDC Cables". In Polymer Insulation Applied for HVDC Transmission, 77–96. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9731-2_4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Zhang, Tiandong, e Qingguo Chi. "High Temperature Dielectric Materials for Electrical Energy Storage". In Polymer Insulation Applied for HVDC Transmission, 653–74. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9731-2_26.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Zha, Jun-Wei, Ming-Sheng Zheng, Wei-Kang Li, George Chen e Zhi-Min Dang. "Correction to: Polypropylene Insulation Materials for HVDC Cables". In Polymer Insulation Applied for HVDC Transmission, C1. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-9731-2_27.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Li, Jin, Wendong Li, Boxue Du e Guanjun Zhang. "Promising Functional Graded Materials for Compact Gaseous Insulated Pipelines". In Polymer Insulation Applied for HVDC Transmission, 525–47. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9731-2_20.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Ran, Zhaoyu, Boxue Du, Wenbo Zhu e Jin Li. "Surface Molecular Structure Modified Epoxy Resin Materials for HVDC GIL Spacer". In Polymer Insulation Applied for HVDC Transmission, 467–98. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9731-2_18.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Xu, Hang, B. X. Du e Zhonglei Li. "Effect of Mechanical Stress on Space Charge Behaviors of PP Insulation Materials". In Polymer Insulation Applied for HVDC Transmission, 127–49. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9731-2_6.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Liang, Hucheng, Boxue Du, Cheng Zhang e Jin Li. "Electric Field Regulation Along Gas–Solid Interface in HVDC GIL with Nonlinear Conductivity Material". In Polymer Insulation Applied for HVDC Transmission, 433–65. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9731-2_17.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Insulating polymer materials"

Afia, Ramy S. A., Ehtasham Mustafa e Zoltan Adam Tamus. "Mechanical Stresses on Polymer Insulating Materials". In 2018 International Conference on Diagnostics in Electrical Engineering (Diagnostika). IEEE, 2018. http://dx.doi.org/10.1109/diagnostika.2018.8526097.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Du, B. X., L. Gu e Yong Liu. "Luminescence in tracking test of polymer insulating materials". In 2008 International Symposium on Electrical Insulating Materials (ISEIM). IEEE, 2008. http://dx.doi.org/10.1109/iseim.2008.4664600.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Doyle, Lucia, e Ingo Weidlich. "Recyclable Insulating Foams for High Temperature Applications". In The First International Conference on “Green” Polymer Materials 2020. Basel, Switzerland: MDPI, 2020. http://dx.doi.org/10.3390/cgpm2020-07200.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Gorur, Ravindranath S., Edward A. Cherney e Reuben Hackam. "Electrical performance of polymer insulating materials: Effect of material and filler type". In Conference on Electrical Insulation & Dielectric Phenomena - Annual Report 1985. IEEE, 1985. http://dx.doi.org/10.1109/ceidp.1985.7728292.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Taygun, M. Erol, I. Akkaya, S. Ö. Gönen e S. Küçükbayrak. "Polymer/glass nanocomposite fiber as an insulating material". In PROCEEDINGS OF THE 6TH INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS & EXHIBITION: (APMAS 2016). Author(s), 2017. http://dx.doi.org/10.1063/1.4975428.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Boxue Du e Yu Gao. "Surface charge measurement of gamma-rays irradiated polymer insulating materials". In 2007 Annual Report - Conference on Electrical Insulation and Dielectric Phenomena. IEEE, 2007. http://dx.doi.org/10.1109/ceidp.2007.4451592.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Du, B., N. Chen, Y. Gao e Xiangjin Zhang. "Carbonization Migration of Polymer Insulating Material Under Magnetic Field". In 2006 IEEE 8th International Conference on Properties and applications of Dielectric Materials. IEEE, 2006. http://dx.doi.org/10.1109/icpadm.2006.284205.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Ikeda, Isamu, Saki Hikosaka e Yoshimichi Ohki. "Superiority of syndiotactic polystyrene as an electrical insulating polymer". In 2011 International Symposium on Electrical Insulating Materials (ISEIM). IEEE, 2011. http://dx.doi.org/10.1109/iseim.2011.6826294.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Gao, Y., B. X. Du e J. W. Zhang. "Measurement of surface resistivity on gamma-ray irradiated polymer insulating materials". In 2011 International Symposium on Electrical Insulating Materials (ISEIM). IEEE, 2011. http://dx.doi.org/10.1109/iseim.2011.6826374.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Du, B. X., e Yi Li. "Fractal analysis on insulation degradation of polymer insulation material". In Proceedings of 2005 International Symposium on Electrical Insulating Materials, 2005. (ISEIM 2005). IEEE, 2005. http://dx.doi.org/10.1109/iseim.2005.193587.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Insulating polymer materials"

SUGAMA, T. RESTORING A DAMAGED 16-YEAR -OLD INSULATING POLYMER CONCRETE DIKE OVERLAY: REPAIR MATERIALS AND TECHNOLOGIES. Office of Scientific and Technical Information (OSTI), gennaio 2007. http://dx.doi.org/10.2172/909953.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Kukacka, L. Development of polymer concrete for dike insulation at LNG facilities: Phase 4, Low cost materials. Office of Scientific and Technical Information (OSTI), gennaio 1991. http://dx.doi.org/10.2172/5949432.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Yang, Arthur, Roman Domszy e Jeff Yang. A New Generation of Building Insulation by Foaming Polymer Blend Materials with CO₂. Office of Scientific and Technical Information (OSTI), marzo 2016. http://dx.doi.org/10.2172/1244652.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Kukacka, L. Development of polymer concrete for dike insulation at LNG facilities: Phase 4, Low cost materials. Final report, September 1, 1987--April 30, 1990. Office of Scientific and Technical Information (OSTI), gennaio 1991. http://dx.doi.org/10.2172/10119216.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!