Tesi sul tema "Industrial management – methodology"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 saggi (tesi di laurea o di dottorato) per l'attività di ricerca sul tema "Industrial management – methodology".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi le tesi di molte aree scientifiche e compila una bibliografia corretta.
Jones, Bryan James. "A risk-based maintenance methodology of industrial systems". Thesis, Liverpool John Moores University, 2009. http://researchonline.ljmu.ac.uk/5904/.
Testo completoWärja, Mathias. "Maintenance management of complex industrial systems : a methodology for renewal strategies". Doctoral thesis, KTH, School of Electrical Engineering (EES), 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-542.
Testo completoFor complex technical systems in the electricity and pulp and paper industries, maintenance management addresses how to exploit physical assets in the most profitably way. This is a difficult task that requires taking into consideration parameters of totally different natures – e.g. reliability data, operating costs, condition of technical systems, the environment and rules and regulation.
An incorrect estimate of a residual lifetime can result in a premature renewal with accompanying high capital costs. If, however, renewal is delayed, a breakdown may occur which can cause major damage to technical equipment and a loss of income due to outages. Because of the complexity of many technical systems, it can be hard to select adequate data to use when making decisions about renewal strategies. To cope with this, one approach is to use less detailed models that are operated by skilled analysts.
This work demonstrates the advantage of such an approach by proposing two methods applied in a joint methodology that has its origins in RCM. The methodology consists of Dynamic Lifetime Model (DLA) and the Condition Based Index (CBI). The DLA method copes with the financial risk associated with the point in time for when a renewal is carried out and the CBI method uses critical parameters to estimate the condition of a technical system. The two methods together create a quantitative connection between reliability, maintenance and financial risk. A case study based validation of the methodology was carried out at SCA Ortvikens paper mill on a refiner system and Forsmark nuclear power plant. Lessons learned from the case study showed that the methodology could be used to identify which components could cause costly breakdown. By using the methodology a manager gets a decision support tool for estimating short-term and long-term consequences of decisions regarding maintenance management in order to maximize utility of the system concerned
Llamas, Zogbi Valentina Maria. "Towards an agile methodology for industrial problem solving". Phd thesis, Toulouse, INPT, 2017. http://oatao.univ-toulouse.fr/19421/1/LLAMAS_ZOGBI_Valentina_Maria.pdf.
Testo completoWelman, Abraham Jacobus Frederik. "The development of an integrated value chain cost reduction methodology". Thesis, Nelson Mandela Metropolitan University, 2013. http://hdl.handle.net/10948/d1012954.
Testo completoWalden, Clayton Thomas. "A taxonomy based assessment methodology for small and medium size manufacturers". Diss., Mississippi State : Mississippi State University, 2007. http://library.msstate.edu/etd/show.asp?etd=etd-11092007-153506.
Testo completoPattison, Elizabeth Mary. "The contribution of soft systems methodology to the achievement of change in organisational culture". Thesis, University of Warwick, 1995. http://wrap.warwick.ac.uk/36206/.
Testo completoFlores-Molina, Jose C. "A Total Quality Management Methodology for Universities". FIU Digital Commons, 2011. http://digitalcommons.fiu.edu/etd/375.
Testo completoDoman, Jennifer L. "Leveraging lean process improvement methodology to promote economic and environmental sustainability : obstacles and opportunities /". Online version of thesis, 2007. http://hdl.handle.net/1850/4871.
Testo completoDudarev, Ivan. "Development and Implementation of Energy Savings and Energy Management Methodology in an Industrial Enterprise". Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-234357.
Testo completoKatz, Bernard. "The integration of project management processes with a methodology to manage a radical innovation project". Thesis, Link to the online version, 2007. http://hdl.handle.net/10019/360.
Testo completoChakrabarty, Nayan. "A Methodology for Supply Inventory Management for Hospital Nursing UnitsConsidering Service Level Constraint". Ohio University / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1596192804676873.
Testo completoLi, Fan. "Performance evaluation and decision support in industrial system management : a benefit-cost-value-risk based methodology". Thesis, Paris, ENSAM, 2017. http://www.theses.fr/2017ENAM0019/document.
Testo completoPerformance measurement and management represents serious challenges to practitioners and researchers in industrial engineering and management sciences for efficient decision making with integrated, dynamic and relevant performance information regarding simultaneous accomplishment of multiple stakeholder objectives. Although many methodologies and approaches have already been proposed, there is still room for new advances to go further in assisting managers and engineers to make better decisions in a more systematic manner.Assuming that the performance of an industrial system, project or process can be comprehensively evaluated by four main dimensions (benefit, cost, value and risk), the thesis proposes an original and complete framework as well as an operational methodology to apply relevant supporting methods and tools for the sake of performance evaluation and decision support in industrial projects.Using several examples based on industrial cases, the work emphasises that the proposed methodology can provide the support for: opportunity assessment of several decision alternatives to select the most appropriate one, performance evaluation at any phase of an industrial project and monitoring of an ongoing industrial project requiring performance evaluation at several phases along its life history
Chapman, Paul Anthony. "Time-based performance improvement : a methodology for the diagnosis of processes and design of performance improvement solutions : executive summary". Thesis, University of Warwick, 2000. http://wrap.warwick.ac.uk/2960/.
Testo completoKisling, Eric Lance. "An implementation of information technological change a socio-technical systems methodology perspective at the Black Chemical Company /". [Bloomington, Ind.] : Indiana University, 2006. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3215190.
Testo completoSource: Dissertation Abstracts International, Volume: 67-04, Section: A, page: 1301. Adviser: Thomas M. Schwen. "Title from dissertation home page (viewed May 14, 2007)."
Chen, Yan. "Data Quality Assessment Methodology for Improved Prognostics Modeling". University of Cincinnati / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1330024393.
Testo completoKotze, Dirk J. "The development of an implementation methodology for a conceptual framework tool used for the improved viewing and utilisation of organisational information". Thesis, Stellenbosch : Stellenbosch University, 2008. http://hdl.handle.net/10019.1/1916.
Testo completoThis thesis reports on a research project conducted at Stellenbosch University, focusing on the field of information management, and contributing to the development of an approach for structuring information in such a manner that context becomes apparent, which on its part assists persons (and groups of persons) in selecting useful information from a larger whole, given a certain context. This document is composed of three general sections. The first section is a literature study focusing on the following topics: (1) Information overload: The amount of information in the world, as well as its rate of generation is discussed, together with the notion of information overload, its causes, symptoms and possible solutions. (2) Information utilisation in organisations: General concepts concerning the utilisation of information in organisations are discussed, together with the manners in which organisations fail in efficiently utilising information, but also some examples where organisations have succeeded. (3) Information modelling: Various well-known information modelling approaches currently employed to improve information utilisation are discussed and compared. It is however mentioned that none of these approaches are sufficiently general, flexible and simple enough to assist typical organisational knowledge workers in efficiently interacting with information. The second section of this thesis focuses on the conceptual framework information modelling approach currently being investigated at Stellenbosch University as a means for improving the information utilisation efficiency of organisational knowledge workers. The basic concepts of the approach are discussed, and it is compared with the more well-known information modelling approaches mentioned in the literature study. The research being conducted on the approach is further briefly discussed, which includes the purpose of this thesis (which is the development of a methodology for conceptual framework implementation in organisations), the research method followed, and the thesis hypothesis, which is: Information represented by a conceptual framework implemented through the use of the developed conceptual framework implementation methodology, offer a truthful view on information found in an organisation. The methodology developed is subsequently discussed in terms of its phases and activities, each of which is discussed in terms of its description, the rationale behind and prerequisites of its execution, details of the manner of its execution, and the eventual outputs thereof. The final section of this thesis provides information on the validation of the conceptual framework implementation methodology described in the previous section, which were done in two parts. A theoretical validation was done through a comparison of the developed methodology with existing methodologies for the implementation of other information modelling approaches. A practical validation was also done through two case studies by which conceptual frameworks were implemented at two separate organisations. The document is finally concluded through a summary of the contents of this thesis, the outcome of the hypothesis test, and some closing remarks.
Nawawi, Abdul Hadi. "Knowledge elicitation methodology from multiple experts for rating valuation by the comparison method for commercial and industrial properties in Malaysia". Thesis, University of South Wales, 1998. https://pure.southwales.ac.uk/en/studentthesis/knowledge-elicitation-methodology-from-multiple-experts-for-rating-valuation-by-the-comparison-method-for-commercial-and-industrial-properties-in-malaysia(c951d970-fa41-4012-8450-ab08934d969c).html.
Testo completoNunes, Paulo. "Holistic risk management in commercial air transport : a methodology to apply ISO 31000 to the airline industry". Thesis, City University London, 2015. http://openaccess.city.ac.uk/13571/.
Testo completoAlsawaf, Anas. "Development of a PC-based cost engineering algorithm for capital intensive industries based on the methodology of total absorption standard costing". Ohio : Ohio University, 1992. http://www.ohiolink.edu/etd/view.cgi?ohiou1176492634.
Testo completoKreisel, Bjorn. "Low cost intelligent automation (LCIA) and process analysis methodology with implementation examples at the company 'Festool GmbH Deutschland'". Thesis, Stellenbosch : Stellenbosch University, 2002. http://hdl.handle.net/10019.1/52921.
Testo completoENGLISH ABSTRACT: This document describes the different possibilities of Low Cost Intelligent Automation (LCIA)and process analysis for companies in the processing industry. These techniques can be used in production and assembly to reach a higher productivity and to maintain the company's competitiveness. Productivity is very important for any company, because it influences the profit. LCIA means using cheap solutions to automate processes in assembly and production. Cheaper machines payoff much faster. This is important, because life cycles are becoming shorter and shorter. With LCIA more manual processes can be automated. This is an advantage especially in countries with high labour costs. Process analysis helps to optimise processes in a company. To reach this goal it is essential to analyse processes systematically. This helps to gather detailed information about manufacturing defects and where they originated from. With these information it is much easier to eliminate the source of error and to reduce the number of defective products. Less errors in a production process lead to higher quality and productivity. The company "Festool GmbH Deutschland" serves as an example for using the described methods. The presented examples for LCIA are simple solutions to automate manual processes in the assembly division. The process of a fully automated machine serves as an example to illustrate the different aspects of a process analysis in this company. The methodologies presented in this document can be used to achieve improvements especially in productivity. Therefore any company coming from a labour intensive industry should think about integrating LCIA and process analysis into their continuous improvement strategy.
AFRIKAANSE OPSOMMING: Hierdie dokument beskryf die verskillende moontlikhede van Lae Koste Intellegente Automasie (LKIA)en die proses analise vir maatskappye in die vervaardiging industrie. Hierdie metodes kan gebruik word in produksie en montering om hoër produktiwiteit te verkry sowel as die maatskapy se mededingendheid te handhaaf. Produktiwiteit is baie belangrik vir enige maatskappy, want dit beïnvloed die winsgewindheid. LKIA beteken die gebruik van goedkoop oplossings om prosesse te automatiseer in montering en produksie. Goedkoper masjiene word vinniger afbetaal. Dit is belangrik, want die lewenssiklus van beide produkte en masjiene word al korter. Met LKIA kan meer handprosesse ge-automatiseer word. Dit is 'n voordeel veral in lande met hoë arbeidskostes. Proses analise help om die prosesse in 'n maatskappy te optimiseer. Om hierdie doel te bereik is dit belangrik om prosesse sistematies te analiseer. Bogenoemde help om gedetaileerde informasie in te samel rondom vervaardigings defekte sowel as die oorsprong daarvan. Met hierdie informasie is dit makliker om die oorsprong van foute uit te skakel en om die getal foutiewe produkte te verminder. Minder foute tydens die vervaardigings proses ly tot 'n hoër kwaliteit en produktiwiteit. Die maatskappy "Festool GmbH Deutschland" dien as 'n voorbeeld vir die gebruik van die beskryfde metodes. Die voorgestelde voorbeelde vir LKIA is eenvoudige oplossings om die handprosesse in die monterings afdeling te outomatiseer. Die proses van 'n ten volle ge-automatiseerde masjien, dien as 'n voorbeeld om die verskillende aspekte van proses analise in hierdie maatskappy te illustreer. Die metodologie wat gebruik is in die dokument, kan gebruik word om verbeteringe veral in produktiwiteit te bewerkstellig. Dus kan enige firma in 'n arbeidsintensiewe industrie gebruik maak van die integrasie van LKIA en proses analise in sy deurlopende verbeterings strategie.
Inkaya, Tulin. "A Methodology Of Swarm Intelligence Application In Clustering Based On Neighborhood Construction". Phd thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613232/index.pdf.
Testo completoSeifert, Claudia, e n/a. "The genesis of organisational crisis : a theory-building approach". University of Otago. Department of Management, 2007. http://adt.otago.ac.nz./public/adt-NZDU20070608.100146.
Testo completoDwivedula, Chaitanya, e Anusha Choday. "A Systematic Literature Review and Industrial Evaluation of Incorporating Lean Methodologies in Software Engineering". Thesis, Blekinge Tekniska Högskola, Institutionen för programvaruteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-5698.
Testo completoContext: Over the recent years, ‘Lean Software Development’ (LSD) has been emerging as a significant practice in the Software Industry. The inherent nature of ‘Lean’ to efficiently handle frequently changing customer needs by minimizing ‘Waste’ is a major success factor in practicing it in the context of ‘Software Engineering’. In simple words, Lean Software Development is the true translation of Lean Manufacturing and Lean IT principles to Software Engineering. This work presents an in-depth analysis on the implication of lean methodologies from both ‘State of Art’ and ‘State of Practice’ in the context of Software Engineering. Objectives: The prime objective of the study is to investigate what methodologies were considered & adopted under lean philosophy and to present relevant evidence on the implication of lean methodologies in reference to what defines ‘lean’ in Software Engineering. An extensive literature review was aimed to find the existing challenging factors that negatively influenced the success of software projects and the respective lean mitigation methodologies that were employed by various software organizations to appease their negative impact. Industrial interviews were conducted by interviewing lean experts, with a motive to find the current state of lean implementation in software industry. The outcomes from the systematic literature review (State of Art) and the industry (State of Practice) are comparatively analysed to explore the similarities and differences on the state of lean implication. Finally, a set of guidelines are recommended that would benefit an Industrial Practitioner/Stakeholder/Academic Researcher in practicing the appropriate lean methodology in the context of software engineering. Methods: We conducted a ‘Systematic literature review’ (SLR) by systematically analyzing relevant studies and then interviewed industrial experts to validate our findings. The systematic literature review was conducted according to the guidelines proposed by Dr. Barbara Kitchenham stated in ‘Guidelines for performing Systematic Literature Reviews’ article. The thorough review helped us in identifying various challenging factors that negatively influenced the success of software projects and the respective lean mitigation methodologies that were practiced in the context of software engineering. The associated benefits of practicing the lean methodologies are also presented. The extensive review included peer reviewed articles from electronic databases such as IEEE Explore, Inspec, Scopus and ISI. In addition to this, we conducted snowball sampling on the references of the selected articles to avoid the potential risk of losing relevant and valuable information. Also, other potential sources of information such as books, theses/dissertations, white papers and website/blog articles are included as a part of Grey Literature. In this study, the articles related to the implication of lean methodologies in the context of software engineering were considered. The review included 72 primary studies published between 1993 and 2012. The primary studies were selected based on the following criteria: If they presented the challenging factors that negatively influenced the success of software projects. If they depicted the implication of lean mitigation methodologies (Tool/ Technique/ Method/ Process/ Practice/ Principle) that appeased the negative impact of the identified challenging factors that hampered the success of software projects. If they depicted the implication of lean methodologies (Tool/ Technique/ Method/ Process/ Practice/ Principle) in general or for a specific development/ Management/ Maintenance improvement activities that lead to the success of software projects in the context of software engineering. If they presented the benefits of practicing lean methodologies in the context of software engineering. The study quality assessment was done based on the quality criteria defined in the ‘Quality assessment criteria checklist’. The data such as Article ID, Article Title, Literature type (Peer- reviewed, Non-peer reviewed), Context of validation of the lean methodology (Industry/Academia), Subjects considered for the study (Researchers/students, Industrial practitioners), Type of article publication (Conference/ Journal/ Books/ Thesis Reports/ Doctoral dissertations/ Other), Research method used in the study (Case Study/ Experiment/ Experience Report/ Not stated/ Secondary Data Analysis/ Literature Review), Context of conducting the research (Industry/ Academia/ Not stated/ Both), Context of validation of the study (Strong/ Medium/ Weak), Publication date & year, Source of the publication, are extracted as a part of Quantitative analysis. The secondary data analysis for both ‘State of Art’ (Systematic literature review) and ‘State of Practice’ (Industry) was carried by performing a generic data analysis designed to answer our research questions. The more specific data such as the challenging factors that negatively influenced the success of software projects, the type of lean contribution presented i.e., the methodology being a Tool, Technique, Practice, Principal, Process or a Method, along with the benefits associated on their implication that helped us to answer our research questions are extracted as a part of qualitative analysis from the selected studies. The industrial interviews were conducted by interviewing potential lean experts who had decent experience in lean software development, to find the current state of lean implication in the software industry. In the end, a comparative analysis was performed to clearly understand the state of convergence and divergence between the results from extensive literature review and the industry with respect to the implication of lean methodologies in the context of software engineering. Results: A total of 72 primary articles were selected for data extraction. 56 articles were selected from the electronic databases that clearly depicted lean implementation in the context of software engineering. 9 articles were selected by conducting snowball sampling i.e. by scrutinizing the references of the selected primary studies and finally the grey literature resulted in 7 articles. Most of the articles discussed about lean implication in the context of software engineering. The depicted lean methodologies were validated in either Industry or Academia. A few articles depicted regarding lean principles and their benefits in the context of software engineering. Most of the selected articles in our study were peer- reviewed. Peer reviewing is a process of evaluating one’s work or performance by an expert in the same field in order to maintain or enhance the quality of work or performance in the particular field. This indicates that the articles considered for data extraction have been reviewed by potential experts in the research domain. Conclusions: This study provided a deeper insight into lean implication in the context of software engineering. The aim of the thesis is to find the challenging factors that negatively influenced the success of software projects. A total of 54 challenges were identified from the literature review. The 72 primary articles selected from various resources yielded 53 lean methodologies. The lean methodologies were grouped into Principles, practices, tools and methods. Mapping between the identified challenges and the mitigation lean methodologies is presented. Industrial interviews were conducted to find the current state of lean implication in software engineering. A total of 30 challenges were identified from the industry. A total of 40 lean methodologies were identified from the interviews. Comparative analysis was done to find the common challenges and mitigation lean methodologies between the State of art and State of practice. Based on the analysis a set of guidelines are presented at the end of the document. The guidelines benefit an industrial practitioner in practicing the appropriate lean methodology. Keywords: Lean Methodology, Lean software development, lean software management, lean software engineering, Systematic literature review, literature review.
0091-8375920473
Yigit, Aybeniz. "A Methodology For Determining The Cluster Of A New Project". Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12606163/index.pdf.
Testo completohowever R&
D projects have specific characteristics that make them harder to manage. The project management methodology applied to R&
D projects may show differences due to the categorization of them. But if there exists a categorization of projects, one can analyze the properties of the project classes and then manage similar projects similarly. In this study, the R&
D projects of a main military electronics company of Turkey, are analyzed. Tunç
(2004) has developed a methodology for clustering the projects of this electronics company. Continuing from his studies, a methodology for determining the class of a new project of this electronics company is developed. For defining the projects in a project space, a Project Identification Card (PIC) is developed. The measurement scale of the PIC is constructed by using the absolutemeasurement Analytic Hierarchy Process. A clustering Tabu Search algorithm is generated for using in the sensitivity analyses of the clusters to projects. And a methodology for determining the cluster of a new project is developed.
Nahangi, Arian A. "Modeling and Solving the Outsourcing Risk Management Problem in Multi-Echelon Supply Chains". DigitalCommons@CalPoly, 2021. https://digitalcommons.calpoly.edu/theses/2321.
Testo completoStein, Johan. "Strategy formation and managerial agency : a socio-cognitive perspective". Doctoral thesis, Stockholm : Economic Research Institute, Stockholm School of Economics [Ekonomiska forskningsinstitutet vid Handelshögsk. (EFI)], 1993. http://www.hhs.se/efi/summary/370.htm.
Testo completoSimões, Adriana da Silva. "Contribuição de técnicas construtivistas no ensino de engenharia de produção". Universidade Federal da Paraíba, 2011. http://tede.biblioteca.ufpb.br:8080/handle/tede/5200.
Testo completoCoordenação de Aperfeiçoamento de Pessoal de Nível Superior
The constructivist teaching method whose main characteristic is the adoption of practical activities in where the individual interacts directly with the object of its development, being motivated to participate actively in the learning process that is included, exploiting their prior knowledge and creativity. From this perspective, this study was to investigate the contribution of constructivist methodology in teaching Production Engineering. For this purpose an experiment was conducted in groups of students of Engineering Production UFERSA, UFF e CEFET-RJ, with the aim of comparing the gains made by students in a traditional classroom and in a constructivist classroom. The two classes discussed the concepts related to Just In Time philosophy. For the constructivist classroom was used Game Production Management, activity games adapted for use in the teaching of production engineering, raised in the literature. Comparison of the results was performed from the application of statistical tests and McNemar Binomial. The results obtained by use of statistical tests denote the contribution of the inclusion of activities in teaching Constructivist Production Engineering. The results collected through a questionnaire administered to students who participated in the experiments showed the acceptance of constructive activity as a tool to complement the exhibition of traditional concepts covered in class.
O método de ensino construtivista tem como característica principal a adoção de atividades práticas em que o individuo interage diretamente com o objeto de seu desenvolvimento, sendo motivado a participar ativamente do processo de aprendizagem em que está incluído, explorando seus conhecimentos anteriores e sua criatividade. Sob essa perspectiva, este trabalho buscou investigar a contribuição da metodologia construtivista no ensino de Engenharia de Produção. Para isso foi realizado um experimento em turmas de alunos dos cursos de Engenharia de Produção da UFERSA, UFF e CEFET-RJ, com o objetivo de comparar os ganhos obtidos pelos alunos em uma aula tradicional e em uma aula construtivista. As duas aulas abordaram os conceitos relacionados à filosofia Just In Time. Para a aula construtivista foi utilizado o Jogo Gestão da Produção, atividade adaptada de jogos utilizados no ensino de engenharia de produção, levantados na literatura. A comparação dos resultados obtidos foi feita a partir da aplicação dos testes estatísticos de McNemar e Binomial. Os resultados obtidos pela utilização dos testes estatísticos denotam a contribuição da inserção de atividades construtivistas no ensino de Engenharia de Produção. Os resultados coletados por meio de um questionário aplicado com os alunos que participaram dos experimentos mostrou a aceitação da atividade construtivista como instrumento complementar a exposição dos conceitos abordados nas aulas tradicionais.
Silva, Elcio Brito da. "Metodologia para planejamento da convergência da Tecnologia da Informação (TI) & Tecnologia da Automação (TA) em processos industriais". Universidade de São Paulo, 2013. http://www.teses.usp.br/teses/disponiveis/3/3143/tde-11072014-004205/.
Testo completoThe intensification of the economic globalization process and the increasing interdependence of markets has been imposing a growing need for improving the competitiveness of all industrial sectors. The convergence of information technology (IT) and automation technology (AT) of productive sectors and administrative corporations is a powerful tool for achieving the high levels of efficiency and effectiveness required in the competitive scenarios of current markets. Despite the progress in connectivity achieved by both technologies, the process of IT & AT integration is complex and presents significant challenges in terms of collaboration between the IT, AT professionals and the production engineers that goes beyond the technical aspects of the convergence. This work presents the development of a methodology for planning the convergence of technology assets, named methodology for planning the convergence of AT & IT technology (MPCTAI) , which aims to reduce the risks involved in the integration of IT & AT, outlines the development planning for convergence to critical success factors (CSF) of the company. This also presents the application of the MPCTAI methodology in a process of convergence and the results for an important company in the sector of products for building construction, as well the results achieved.
Rahimi, Abdolreza. "Development of a methodology for the effective implementation of business process reengineering in manufacturing companies". Thesis, Loughborough University, 1996. https://dspace.lboro.ac.uk/2134/7428.
Testo completoQasim, Lara. "System reconfiguration : A Model based approach; From an ontology to the methodology bridging engineering and operations Model-Based System Reconfiguration: A Descriptive Study of Current Industrial Challenges Towards a reconfiguration framework for systems engineering integrating use phase data An overall Ontology for System Reconfiguration using Model-Based System Engineering An Ontology for System Reconfiguration: Integrated Modular Avionics IMA Case Study A model-based method for System Reconfiguration". Thesis, université Paris-Saclay, 2020. http://www.theses.fr/2020UPAST031.
Testo completoSystem evolutions have to be managed to ensure system effectiveness and efficiency through its whole lifecycle, particularly when it comes to complex systems that take years of development and dozens of years of usage. System Reconfiguration is key in complex systems management, as it is an enabler of system flexibility and adaptability regarding system evolutions. System reconfiguration ensures operational effectiveness and increases system qualities (e.g., reliability, availability, safety, and usability).This research has been conducted in the context of a large international aerospace, space, ground transportation, defense, and security company. This research aims at supporting system reconfiguration during operations.First, we conducted a descriptive study based on a field study and a literature review to identify the industrial challenges related to system reconfiguration. The main issue lies in the development of reconfiguration support. More specifically, challenges related to data identification and integration were identified.In this thesis, we present the OSysRec ontology, which captures and formalizes the reconfiguration data. The ontology synthesizes the structure, dynamics, and management aspects necessary to support the system reconfiguration process in an overall manner.Furthermore, we present a model-based method (MBSysRec) that integrates system reconfiguration data and bridges both the engineering and the operational phases. MBSysRec is a multidisciplinary method that involves combinatorial configuration generation and a multi-criteria decision-making method for configuration evaluation and selection.This thesis is a step towards a model-based approach for system reconfiguration of evolving systems, ensuring their flexibility and adaptability
Karagiannis, Georgio Marios. "Methodologie pour l’analyse de la robustesse des plans de secours industriels". Thesis, Saint-Etienne, EMSE, 2010. http://www.theses.fr/2010EMSE0590/document.
Testo completoThe objective of this research thesis is to develop a methodology for the analysis of robustness of industrial emergency plans. Failures can occur when these plans are put into action; they can result to deteriorated operating conditions for these systems. Existing emergency plan analysis approaches do not allow for a structured analysis of the emergency response mechanism. The methodology developed in this research project is based on a structuro-functional and generic formalization of industrial emergency plans, which describes both the functions of the plans and the resources necessary for accomplishing them. Furthermore, lessons learned through the analysis of 159 industrial accidents and 61 internal and external industrial emergency plan exercises have led to the identification of failures that may occur during the use of industrial emergency plans for emergency response. The model that was developed and the information obtained through experience feedback result in a structured analysis of failures of these plans. This robustness analysis is based on the failure risk assessment of the plan’s functions. The failure probability is estimated through assessment questions and the plan’s functions and resources fault trees. The failure severity of each function is determined by using the facility’s hazard study and by applying the maximum damage rule. The failure criticality of each function is hence obtained, and the plan’s criticality results from the aggregation of the criticalities of the plan’s functions. The approach followed is hence based on a failure risk analysis, which in turn is built upon lessons learned and the critical analysis of the plan’s model. This methodology therefore constitutes a toolbox that can be used both for the analysis of existing plans and the development of emergency response mechanism
MARILUNGO, Eugenia. "Study and development of a methodology for Product-Service System engineering". Doctoral thesis, Università Politecnica delle Marche, 2017. http://hdl.handle.net/11566/245414.
Testo completoThis research thesis faces the Product-Service System (PSS) topic with the aim to investigate the current literature context, both to understand its current status and to analyse the main methods and tools developed to support the PSS in manufacturing. The results derived have been used to identify the current criticalities of such the existed methods and to identify the main challenges to address. The PSS concept is based on the integration of products and services with the aim to extend the current product lifecycle, generating a benefit for the customer. This integration is currently allowed also thanks to the development of a set of new technologies (e.g. IoT), which through the product connection make possible the link between a physical item and a system able to deliver several service functionalities (intangible items) that are the real benefit for customer. The manufacturing approaching to PSS has been defined in literature as Servitization process [Thoben et al. 2001] and it involves four main stages that are the different steps that product-oriented companies can address. The Servitization process establishes a transformation in terms of business model, where the common lifecycle trend has been changed. The present research thesis aims to define and develop a methodology to design a PSS solution, based on the user centred design (UCD) approach, which is one of the main challenge in moving from product-oriented to service-oriented design. Such the methodology uses the QFD approach, and allows the concurrently technical and business analyses. Such the methodology has been applied to a case study at Indesit Company, in order to test its validity.
CAPITANELLI, ANDREA. "A User-Centred Methodology to Design and Simulate Smart Home Environments and Related Services". Doctoral thesis, Università Politecnica delle Marche, 2017. http://hdl.handle.net/11566/245273.
Testo completoThe advances in home automation and communication technologies offer several attractive benefits for the modern smart home, such as increased energy efficiency, improved residential comfort and reduced operative costs for the homeowner. Data aggregation and sharing within the networks can be guaranteed by modern Internet of Things (IoT) approaches and supported by available Information and Communication Technologies (ICT) tools. Such technologies are evolving and the private houses are becoming technological places populated by a multitude of devices able to collect a huge quantity of data and to cooperate in an intelligent way to control different domains, from household appliances to lighting or heating and ventilation. On one hand, the rising intelligence of smart devices makes a large amount of data available; on the other hand, data complexity creates difficulties in classifying, transmitting and interpreting essential data. Both aspects may drastically reduce the potential advantages and limit the diffusion smart devices. While in building automation proven solutions already exist, tailored applications for private houses and integration among heterogeneous devices and systems are still challenging due to the lack of standards and the variety of adopted communication protocols and data model schemas. Furthermore, even when the device connection and consolidation are achieved, making them cooperate in an interoperable way is another big challenge due to differences in usage paradigms, operation modes and interface integration. In fact, Smart Homes still lack of high interoperability and researches are often strongly technology-oriented and focused on single sub-system potentialities neglecting the expected benefits for the final users. For this purpose, the presented research defines an information management model for the smart home environment to support design and simulation of its devices as well as the enabled services. Such a model considers different device typologies, their mutual relationships, the information flows and the user interaction modalities in order to properly model the environment and define its behavior. It supports the design of the smart home by simulating the devices’ functionalities and estimating the expected performances.
Oumnia, Sandrine. "Proposition d'une démarche d'accompagnement à la mise en œuvre de systèmes de management de l'environnement". Vandoeuvre-les-Nancy, INPL, 1996. http://www.theses.fr/1996INPL060N.
Testo completoBorges, Marlucio de Souza. "Sustentabilidade ambiental em pequenas empresas : implementação interativa de produção mais limpa (p+l). Estudo em uma empresa metal-mecanica do ramo automotivo". [s.n.], 2005. http://repositorio.unicamp.br/jspui/handle/REPOSIP/258142.
Testo completoDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Civil, Arquitetura e Urbanismo
Made available in DSpace on 2018-08-09T17:47:37Z (GMT). No. of bitstreams: 1 Borges_MarluciodeSouza_M.pdf: 1874842 bytes, checksum: c397db0a6aadccfd338b388796b15fda (MD5) Previous issue date: 2005
Resumo: O ramo automotivo do segmento metal-mecânico é composto majoritariamente por pequenas empresas que estão expostas a uma exigência competitiva global: aprimorar seu padrão de qualidade ambiental. Todavia, ainda se observa, para estas empresas, uma discrepante participação na adoção de instrumentos voluntários de gestão ambiental quando comparadas, por exemplo, a grandes empresas. Dentre estes, a produção mais limpa (p+l) destaca-se como uma estratégia robusta de gestão ambiental corporativa por se estabelecer a partir de uma plataforma integrada e com foco na prevenção. Sob esta perspectiva, o presente trabalho propõe desenvolver e aplicar uma metodologia interativa para implementação de p+l; esta metodologia é composta por um programa de implementação de p+l, concebido e construído especialmente para o perfil de uma pequena empresa e por um conjunto de perguntas e respostas que se vinculam estruturalmente às fases e atividades deste programa e permite, desse modo, sua aplicação interativa valorizando o capital humano, o conhecimento e a linguagem neste segmento de empresas
Abstract: The Brazilian metals sector and, mainly its automotive section, is mostly composed by small enterprises which are exposed to a competitive global demand: permanently improve their environmental quality standard. However, for such enterprises, there is still a meaningful discrepancy in participation as far as self-regulatory environmental management instruments adoption is concerned when compared, for instance, to large companies. Amongst these instruments, the cleaner production stands out as a vigorous environmental management approach based on an integrated platform with a preventive focus. Under this point of view, this study proposes to develop and to apply an interactive cleaner production implementation methodology. This methodology is built by a cleaner production implementation program, especially conceived and created for the small enterprises profile and by a set of questions and answers structurally connected to the phases and activities of such program allowing its interactive implementation as well as increasing value for the human capital, the knowledge and the language in small enterprises
Mestrado
Saneamento e Ambiente
Mestre em Engenharia Civil
Cesar, Iván Cuba Núñez. "Propuesta de mejora para incrementar la disponibilidad de los equipos en el proceso de teñido, a través de un plan de mantenimiento en una empresa textil peruana". Bachelor's thesis, Universidad Peruana de Ciencias Aplicadas (UPC), 2018. http://hdl.handle.net/10757/625854.
Testo completoThe textile and garment sector is one of the sectors with the highest expectations of sustainable growth in the industry and one of the sectors with the highest competition with other countries in the international sector. This sector covers different types of processes, ranging from fiber treatment, spinning, weaving and confection. The present analysis falls on the low availability that presents the equipment in the process of dyeing. This process is measured from the reprocesses that exist due to the execution of corrective maintenance, which affects the production of fabric dyeing. Likewise, it is possible to evaluate the average time between failures (MTBF) and the average repair time (MTTR), which indicates the variability below the target expected by the organization. On the other hand, in the third chapter the improvement proposal is developed from the development of the state of art of the first chapter. For this, the methodology to be followed is proposed according to a combination of RCM and TPM. Under this methodology, different activities and strategies are developed to detect critical equipment and implement mechanical and electrical preventive maintenance plans. In addition, the implementation of a maintenance based on (predictive) and autonomous condition is included as part of this system. Finally, the third chapter ends with the support of the 5 '' S '' methodology and the economic evaluation based on the cost structure planned by the project. Finally, chapter four presents the validation of the improvement proposal based on the validation of the results in the Arena software. This allows concluding that the MTTR and MTBF indicators have achieved the objectives presented in the proposal.
Tesis
Sima, Xingyu. "La gestion des connaissances dans les petites et moyennes entreprises : un cadre adapté et complet". Electronic Thesis or Diss., Université de Toulouse (2023-....), 2024. http://www.theses.fr/2024TLSEP047.
Testo completoKnowledge is vital for organizations, particularly in today’s Industry 4.0 context. Knowledge Management (KM) plays a critical role in an organization's success. Although KM has been relatively well-studied in large organizations, Small and Medium-sized Enterprises (SMEs) receive less attention. SMEs face unique challenges in KM, requiring a tailored KM framework. Our study aims to define a framework addressing their challenges while leveraging their inherent strengths. This thesis presents a dedicated and comprehensive SME KM framework, offering dedicated solutions from knowledge acquisition and representation to exploitation: (1) a dedicated knowledge acquisition process based on the Scrum framework, an agile methodology, (2) a dedicated knowledge representation model based on semi-structured KG, and (3) a dedicated knowledge exploitation process based on knowledge-relatedness RS. This research was conducted in collaboration with Axsens-bte, an SME specializing in consultancy and training. The partnership with Axsens-bte has provided invaluable insights and practical experiences, contributing to developing the proposed KM framework and highlighting its relevance and applicability in real-world SME contexts
Mehdizadeh, Rasool. "Dynamic and multi-perspective risk management of construction projects using tailor-made Risk Breakdown Structures". Thesis, Bordeaux 1, 2012. http://www.theses.fr/2012BOR14521/document.
Testo completoIn recent years, intensive research and development have been done in the area of construction projects risk management. The construction projects involve numerous participants whose interests and demands need to be considered in the managerial decision-making to ensure the success of the project. Risk Breakdown Structure is a hierarchically organized depiction of the identified project risks arranged by risk categories and subcategories that identifies the various areas and causes of potential risks. This type of representation has many advantages and is a suitable tool especially for risk management of construction projects since: it offers a synthetic view on risks, each stakeholder can have his own view on the project and it is compatible with evolutionary and dynamic nature of project risks. However, RBS suffers several drawbacks such as lack of consensus on how to develop an RBS for a new project, lack of clarity and inconsistencies in definition of risk categories and lack of rules enabling transfer of qualitative/quantitative information of risks across the tree. In this PhD thesis, we propose a methodology for the development of tailor-made RBS's which are adapted to several constraints: being fitted to the stage and degree of development of the project, being able to offer different views for the different partners. This makes it possible to establish a dynamic, multi-scale and multi-perspective approach in which each partner, at each desired stage, can focus on selected specific risks and divide the RBS's up into a greater number of subcategories in specific fields. It allows to identify and manage the construction project risks in a more formal, efficient and systematic way. In parallel, efforts have been devoted to the development of an advanced method for analysis and propagation of risk values through RBS. The aim was to develop a more coherent approach in order to get more realistic results without suffering from the usual weaknesses of available methods in literature to calculate the risk value of categories in RBS. The method combines consistently the quantitative and qualitative approaches, allowing the user to choose the best one for risk assessment at any level based on the available information and required accuracy.Special care was taken in the development of the risk knowledge database in order to ensure the data's consistency. A database which has three interactive components of risk events, risk categories and micro trees, and have been developed based on a thorough analysis of literature. This knowledge base is general enough to cover all construction projects but at the same time, specific enough to be adapted to a given particular project. This database provides a common language within which the project risks can be described and discussed. The RBS rebuilding process is driven in such a way as to make it possible to compare different possible RBS's according to several criteria (degree of development, user satisfaction and highlighting the contrast of risk values). The database is constructed in such a way as to facilitate further developments and updating
در طي سالهاي اخير، تحقيقات گستردهاي در زمينه مديريت ريسک پروژههاي ساخت و ساز و زيربنايي انجام گرفته است. غالبا اين نوع از پروژهها در برگيرنده تعداد زيادي ذينفع (مالک، پيمانکاران، طراحان فني و معماري، سرمايه¬گذار، بيمهگر و ...) ميباشند که مدنظر قرار دادن منافع، اهداف و مطالبات آن¬ها در اتخاذ تصميمها يکي از موارد لازم براي اطمينان از موفقيت پروژه ميباشد.ساختار درختي ريسک (Risk Breakdown Structure) که بازنمودي طبقه¬بندي شده از ريسکهاي پروژه ارائه مينمايد، متشکل از گروهها و زير¬گروههاي سازمان يافته ريسک بوده و ابزاري بسيار موثر در شناسايي منابع و آثار محتمل ريسکها ميباشد. اين نوع باز¬نمود ريسکها داراي مزاياي فراواني ميباشد به خصوص در مديريت ريسک پروژههاي عمراني و زيربنايي. بخشي از دلايل اين مدعا عبارتند از: توانايي RBS در تجزيه وتحليل ريسکهاي پروژه و اينکه با استفاده از RBS هريک از اعضاي ذينفع پروژه ميتواند ديدگاه خاص خود را نسبت به ريسکهاي پروژه داشته باشد که اين قضيه با ماهيت ديناميک و تکاملي پروژهها به خوبي سازگار ميباشد. با اين¬حال، عليرغم قابليتهاي فوق العاده اين ابزار، RBS داراي چندين ضعف اساسي ميباشد از قبيل: عدم وجود راهنما، روش و اجماع در چگونگي طراحي RBS جديد براي يک پروژه جديد با ويژه¬گيهاي خاص خود، وجود تعاريف مبهم و بعضا متناقض ريسکها و گروههاي ريسک در RBSهاي موجود، عدم وجود روشي مشترک و موثر براي انتقال اطلاعات کمي و کيفي وقايع ريسک بر روي ساختار درختي RBS به منظور محاسبه مقادير ريسک هر گروه ريسک.در اين رساله دکتري، روشي نوين براي طراحي RBSهاي سازگار براي هر پروژه يا شرايط خاص ارائه ميگردد. اين RBSها با مقطع زماني و ميزان پيشرفت پروژه و همچنين ديدگاههاي متفاوت ذينفعان پروژه نسبت به ريسکها سازگار ميباشند. اين روش متضمن اعمال مديريت ريسک پويا و ديناميک، چند مقياسي و چند بعدي در پروژهها بوده و هر يک از اعضاي پروژه در هر مقطع زمانی خاص قادر خواهد بود بر ريسکهاي مورد نظر خود تمرکز نموده و براي کسب اطلاعات جامعتر، هر گروه ريسک در RBS را به تعداد بيشتري زير گروه تجزيه نمايد. چنين رويهاي ابزار و روش لازم براي شناسايي و مديريت سيستماتيک، موثرتر و رسميتر ريسکهاي پروژه را فراهم مينمايد.همزمان با توسعه روش مذکور براي طراحي RBSهاي سفارشي براي هر مورد خاص، تلاش ويژه¬اي براي ابداع روشي نوين به منظور کسب نتايج واقع¬بينانه¬تر در آناليز و توزيع مقادير ريسک بر روي شاخه¬هاي RBS اعمال گرديد. روش پيشنهادي، ترکيبي سازگار از رويکرد¬هاي کمي و کيفي ارائه نموده و کاربر قادر خواهد بود بر اساس ميزان اطلاعات موجود و دقت مورد نياز بهترين گزينه را انتخاب نمايد.براي اطمينان از سازگاري اطلاعات مورد استفاده در روش¬هاي فوق الذکر و ايجاد ادبياتي مشترک واستاندارد براي توصيف و بحث پيرامون ريسک¬هاي پروژه، دقت خاصي در توسعه ديتا¬بيس (بانک اطلاعات) ريسک اتخاذ گرديد. اين پايگاه¬داده که بر اساس مطالعه و تجزيه و تحليل دقيق متون موجود، استاندارها و گزارشات فني پيرامون مديريت ريسک پروژه¬هاي عمراني تهيه گرديده است متشکل از سه بخش اساسي پويا و توسعه پذير مي¬باشد: وقايع ريسک، گروه¬هاي ريسک و ميکرو درخت¬ها. در عين جامعيت اين ديتا¬بيس براي تحت پوشش قرار دادن انواع پروژه¬هاي عمراني، ساختار اطلاعات به گونه¬اي طراحي گرديده که توسعه آن براي تمرکز بر نوع خاصي از پروژه (تونل، سازه¬هاي موقت، ...) امکان¬پذير مي¬باشد.فرايند طراحي RBSهاي سفارشي با بازسازي تمامي RBSهاي ممکن از طريق ترکيب ميکرو درخت¬هاي موجود در ديتا¬بيس آغاز گرديده و سپس براي انتخاب بهترين درخت ريسک، تمامي گزينه¬هاي ممکن به واسطه معيار¬هاي کيفيت تعريف شده RBS (ميزان توسعه ساختار درخت ريسک، تناسب ساختار RBS با مطالبات و اهداف کاربر و کنتراست مقادير ريسک بر روي شاخه¬هاي RBS) مقايسه مي¬گردند.براي تسهيل کاربرد عملي روش¬هاي ارئه شده در پروژه¬هاي واقعي، نرم افزار خاصي بر اساس تمامي مفاهيم و الگوريتم¬هاي موجود در روش-هاي توسعه داده شده تهيه گرديده است. اين نرم افزار با واسط کاربر پسند، ابتدا تمامي RBSهاي ممکن را توليد نموده، مقادير ريسک گروه¬هاي ريسک را محاسبه کرده و به طور اتوماتيک براي هر RBS پنج فاکتور کيفيت محاسبه مي¬نمايد. در گام دوم، تمامي RBSهاي ايجاد شده با استفاده از يکي از روش¬هاي تصميم¬گيري چند¬معياري رتبه¬بندي شده، کاربر قادر خواهد بود بهترين RBS را انتخاب نمايد. نرم افزار قادر است به طور گرافيکي ساختار درختي تمامي RBSهاي طراحي شده را به همراه مقادير ريسک محاسبه شده و توزيع وقايع ريسک بر روي شاخه¬هاي RBS نمايش دهد
Stelzer, Ralph. "Entwerfen Entwickeln Erleben 2014 – Beiträge zur virtuellen Produktentwicklung und Konstruktionstechnik: Dresden, 26.-27. Juni 2014". TUDpress, 2014. https://tud.qucosa.de/id/qucosa%3A28132.
Testo completoStelzer, Ralph. "Entwerfen Entwickeln Erleben 2016 - Beiträge zur virtuellen Produktentwicklung und Konstruktionstechnik: Dresden, 30. Juni – 1. Juli 2016". TUDpress - Verlag der Wissenschaften GmbH, 2016. https://tud.qucosa.de/id/qucosa%3A29550.
Testo completoRieg, Frank, Jörg Feldhusen, Ralph Stelzer, Karl-Heinrich Grote e Klaus Brökel. "Entwerfen Entwickeln Erleben - Methoden und Werkzeuge in der Produktentwicklung: 10. Gemeinsames Kolloquium Konstruktionstechnik KT2012". TUDpress - Verlag der Wissenschaften GmbH, 2017. https://tud.qucosa.de/id/qucosa%3A30479.
Testo completoWang, Ling. "A methodology of sustainability accountability and management for industrial enterprises". 2005. http://wwwlib.umi.com/dissertations/fullcit/3169103.
Testo completoTitle from PDF title page (viewed on Nov. 30, 2005) Available through UMI ProQuest Digital Dissertations. Thesis adviser: Li lin. Includes bibliographical references.
Frazier, Robert Scott. "An exergy diagnostic methodology for energy management in manufacturing". 2006. http://digital.library.okstate.edu/etd/umi-okstate-1993.pdf.
Testo completo"The development and validation of a variable remuneration methodology". Thesis, 2008. http://hdl.handle.net/10210/856.
Testo completoProf. Theo Veldsman Prof. Gert Roodt
Kumphai, Wisit. "Energy index decomposition methodology at the plant level". 2006. http://digital.library.okstate.edu/etd/umi-okstate-2019.pdf.
Testo completoGreer, James LaMonte. "Effort flow analysis a methodology for directed product evolution using rigid body and compliant mechanisms /". Thesis, 2002. http://wwwlib.umi.com/cr/utexas/fullcit?p3099456.
Testo completoHung, Wei-Hsi. "Supporting organisational critical activities from web sites : an evaluation methodology development /". 2006. http://adt.waikato.ac.nz/public/adt-uow20061108.192517/index.html.
Testo completoSylvie, Jonathan R. Haas Carl T. Thomas Stephen Richard. "Developing best practices for industrial project life cycle security and a methodology for measuring implementation". 2005. http://repositories.lib.utexas.edu/bitstream/handle/2152/1740/sylvied88340.pdf.
Testo completoSylvie, Jonathan R. "Developing best practices for industrial project life cycle security and a methodology for measuring implementation". Thesis, 2005. http://hdl.handle.net/2152/1740.
Testo completoLee, Shih Chyi, e 李士畦. "Study on the Basis of Industrial Water Management and Methodology of Determining Per Unit Water Use". Thesis, 1994. http://ndltd.ncl.edu.tw/handle/41484101349890125094.
Testo completo