Bibliografie tematiche / Industrial designers

Indice

  1. Articoli di riviste
  2. Tesi
  3. Libri
  4. Capitoli di libri
  5. Atti di convegni
  6. Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Industrial designers"

Autore: Grafiati
Pubblicato: 4 giugno 2021
Ultima modifica: 30 luglio 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Industrial designers".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Industrial designers"

1

Colgan, L., A. Gupta, P. J. Rankin e R. Spence. "EMPOWERING INDUSTRIAL DESIGNERS". ACM SIGCHI Bulletin 23, n. 4 (ottobre 1991): 50–51. http://dx.doi.org/10.1145/126729.1056046.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Mohamed Raif, Diana, Rusmadiah Anwar, Siti Noor Azila Noordin e Zuraidy Abd Rahim. "Designer Perception and Design Thinking in Industrial Ceramic Product Development". Environment-Behaviour Proceedings Journal 7, SI9 (30 ottobre 2022): 159–67. http://dx.doi.org/10.21834/ebpj.v7isi9.4260.

Testo completo
Abstract (sommario):
This paper discusses the methods used to conduct designer perception and design thinking in industrial ceramic product development. The designers themselves struggle to clarify how they make the association that immediately them to be the outcome and why those decisions are rational because the thinking behind design is not completely comprehended. This research attempt to identify product design development in critical design situations, empirically test the design thinking process towards industrial ceramic design processes and establish an innovative technique for capturing the ceramic designer’s thinking process. Exploiting a mix of aesthetics, ethics, and knowledge, design thinking is a contemplative longing to maneuver a new schematic in design development.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Qi, Hao, Xue Yan Wang e Qiao Mei Zhang. "Research on Efficient Ceramic Materials and Measure Scheme". Applied Mechanics and Materials 329 (giugno 2013): 91–95. http://dx.doi.org/10.4028/www.scientific.net/amm.329.91.

Testo completo
Abstract (sommario):
In the design of industrial products, industrial designers face the new product design issues in ceramic materials. The designer will be more concerned about the application of new materials in the product design respected selection innovations. The emergence of the ceramic material, adding a new "color" for the design of the expression, provides designers with a richer design means of expression.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Luo, Shijian, Yufei Zhang, Jie Zhang e Junheng Xu. "A User Biology Preference Prediction Model Based on the Perceptual Evaluations of Designers for Biologically Inspired Design". Symmetry 12, n. 11 (12 novembre 2020): 1860. http://dx.doi.org/10.3390/sym12111860.

Testo completo
Abstract (sommario):
Biology provides a rich and novel source of inspiration for product design. An increasing number of industrial designers are gaining inspiration from nature, producing creative products by extracting, classifying, and reconstructing biological features. However, the current process of gaining biological inspiration is still limited by the prior knowledge and experience of designers, so it is necessary to investigate the designer’s perception of biological features. Herein, we investigate designer perceptions of bionic object features based on Kansei engineering, achieving a highly comprehensive structured expression of biological features forming five dimensions—Overall Feeling, Ability and Trait, Color and Texture, Apparent Tactile Sensation, and Structural Features—using factor analysis. Further, producing creative design solutions with a biologically inspired design (BID) has a risk of failing to meet user preferences and market needs. A user preference prediction support tool may address this bottleneck. We examine user preference by questionnaire and explore its association with the perceptual evaluation of designers, obtaining a user preference prediction model by conducting multiple linear regression analysis. This provides a statistical model for identifying the relative weighting of the perception dimensions of each designer in the user preference for an animal, giving the degree of contribution to the user preference. The experiment results show that the dimension “Overall Feeling” of the designer perception is positively correlated with the “like” level of the user preference and negatively correlated with the “dislike” level of the user preference, indicating that this prediction model bridges the gap caused by the asymmetry between designers and users by matching the designer perception and user preference. To a certain extent, this research solves the problems associated with the cognitive limitations of designers and the differences between designers and users, facilitating the use of biological features in product design and thereby enhancing the market importance of BID schemes.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Page, Tom. "An Analysis of the Value of Data Ecosystem Tools for Industry 4.0". International Journal of Innovation in the Digital Economy 10, n. 4 (ottobre 2019): 18–32. http://dx.doi.org/10.4018/ijide.2019100102.

Testo completo
Abstract (sommario):
Product design is a process that involves many methods and practices to be able to create “good design.” From user studies to experimentation, the designer has many tools at his disposal to understand the market and the requirements of the product they wish to produce. Big data has been a disruptor in user analysis for many organizations wishing to get the bigger picture. It has proven to have many positive implications while also being restrictive to those willing to use it. Therefore, connected open systems where all stratums are able to access similar applications have been made available. With the 4th industrial revolution underway, and the ability to utilise a plethora of sensors and electronic data provided by internet connected devices, is it in the designer's interest to adopt modern data practices? During this research, the suitability of big data practices to designers was assessed to gain an understanding of the environment that would allow designers to utilise this new platform including the practice of open data and the systems required to manage it. This article will address emerging and current technologies in the use of data within the 4th industrial revolution. Big data and open data were critically examined of their processes and downfalls compared to how the designer would use the practices.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Thilmany, Jean. "Shaking Hands Again". Mechanical Engineering 125, n. 04 (1 aprile 2003): 34–36. http://dx.doi.org/10.1115/1.2003-apr-1.

Testo completo
Abstract (sommario):
This article discusses that technology can ease the adversity between industrial designers and mechanical engineers. In many manufacturing organizations, engineers coexist, albeit sometimes uneasily, with the industrial designers who shape the way the product will look on the outside. While mechanical engineers take care of laying out the mechanisms inside the product’s shell, industrial designers are concerned with its external shape and appeal. At Symbol Technologies in Holtsville, NY, that uneasy alliance does not exist anymore. Symbol’s devices have to be rugged because, although they are meant to be held easily in the hand, they can just as easily be dropped. The company uses I-deas, from EDS of Plano, Texas, for CAD modeling. Before beginning to sculpt on screen, the designer now talks to the engineer about the product. The engineer might know that both a scan engine and a set of batteries must be included inside the final product. The CAID and CAD software work together in such a way that, if an industrial designer changes something about the outside shape, the mechanical features automatically update to accommodate the change. Engineers do not have to rework the internal parts each time the external changed.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Süner-Pla-Cerdà, Sedef, Gülşen Töre-Yargin e Asli Günay. "Industrial Designers in UX Practice: Motivations, Professionalization, and the Construction of Designer Identity". Design Issues 39, n. 2 (2023): 27–40. http://dx.doi.org/10.1162/desi_a_00715.

Testo completo
Abstract (sommario):
Abstract Our article discusses the insights from original research conducted with design practitioners to better understand the experiences of industrial design graduates as they are adopting new professional roles in user experience (UX) affiliated positions. We utilize narrative identity work as the theoretical frame to interpret the legitimation strategies of industrial designers while grounding their motivations, perceived competence, and fitness to a UX position. Such narratives support our arguments on the conscious efforts of designers toward the construction of a professional designer identity, which is stimulated by this role change.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Skaggs, Paul T. "Industrial Designers: Three Cognitive Modes". International Journal of Design Education 12, n. 2 (2018): 39–44. http://dx.doi.org/10.18848/2325-128x/cgp/v12i02/39-44.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

MCCLELLAND, IAN. "Marketing ergonomics to industrial designers". Ergonomics 33, n. 4 (aprile 1990): 391–98. http://dx.doi.org/10.1080/00140139008927142.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Kim, KwanMyung, e Kun‐Pyo Lee. "Don't Make Art, Do Industrial Design: A Voice from Industry". Design Management Review 25, n. 1 (marzo 2014): 40–45. http://dx.doi.org/10.1111/drev.10270.

Testo completo
Abstract (sommario):
Industrial designers and engineering designers: Can't we all just get along? Unfortunately, when push comes to shove, it's engineering that tends to win. How can schools better prepare industrial designers for the work force?Engineering designers and industrial designers would get along much better if they shared common knowledge and common goals—long before they reached the workplace.
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "Industrial designers"

1

Eti, Melek Erkarslan Önder. "A critical analysis of the role of women designers in the progress of industrial product design in Turkey since the 80S/". [s.l.]: [s.n.], 2005. http://library.iyte.edu.tr/tezler/master/endustriurunleritasarimi/T000407.pdf.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Pei, Eujin. "Building a common language of design representations for industrial designers & engineering designers". Thesis, Loughborough University, 2009. https://dspace.lboro.ac.uk/2134/5432.

Testo completo
Abstract (sommario):
To achieve success in today's competitive environment, companies are realising the importance of design collaboration during new product development. The aim of this research was to develop a collaborative design tool for use by industrial designers and engineering designers. To achieve this, a literature review was undertaken to understand the working relationship among the two disciplines during new product development. Following this, empirical research through interviews and observations outlined three problem areas: conflicts in values and principles; differences in education; and differences in representational tools and methods. The latter was chosen because the problem area of design representations was found to be highly significant. In looking at bridging differences in design representations, a taxonomy comprising 35 forms of sketches, drawings, models and prototypes was generated. A second stage of empirical research was conducted to establish the popularity of each representation and the type of design / technical information that industrial designers and engineering designers communicated with. The information was indexed into CoLab cards that would enable the two disciplines to gain joint understanding and create shared knowledge when using visual design representations. Following a pilot evaluation and minor modifications, student and practitioner interviews with a case study were employed to assess the significance of CoLab. The findings revealed that 82% of the interviewees felt CoLab to have built a common ground through the use of visual design representations. 75% gave a positive rating when asked if the system would enhance collaboration and 91% gave the physical cards a positive response as it provided instant access to information and allowed easy sharing. This thesis is a step towards a greater understanding of collaboration between industrial designers and engineering designers. The use of the CoLab system provides the prospect of achieving a common ground between the two disciplines.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Ward, Stephen James Safety Science Faculty of Science UNSW. "Designers and users: a survey of user research methods employed by Australian industrial designers". Awarded by:University of New South Wales. School of Safety Science, 2006. http://handle.unsw.edu.au/1959.4/26206.

Testo completo
Abstract (sommario):
Designers of mass produced products require knowledge about anticipated users of their designs in order to make reasonable predictions about how users will interact with a product and how that product will satisfy users??? needs. However, there is little reported study of how industrial designers get the information they need about users, or to what extent they adapt and use information available from fields of study such as ergonomics or market research. Study in this area is important, in order to have a knowledge base that will support development of methods and data sources that may help designers and others bring a better understanding of users into the product design process. In this study, group interviews and a questionnaire were used to ask industrial designers how and where they get information about users, and about their perceptions of the role and value of user research in design. The group discussions involved a total of 45 participants from nine companies in Sydney. A questionnaire that followed was completed by 35 respondents representing at least 15 different design consultancy companies throughout Australia. Results showed that the designers surveyed used many of the methods promoted in the literature of ergonomics, design and market research, but often in a cut-down form. For example, there was widespread use of work colleagues and family members as test subjects. Designers used quantitative information where it was applicable but often sought qualitative information that would provide insights or enable them to develop empathic understanding of the users. Time and cost constraints limited the extent to which designers could engage in user research activity but there was general agreement that user research was a necessary part of design and that in the future designers will require a stronger capability in user research. Further research could focus on the evaluation of user research methods used in design and the potential for further collaboration between designers and other specialists in this area.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Suel, Bulben Arda. "The Role Of The In-house Industrial Designer In Turkish Industry: Perceptions Of Manufacturers And Designers". Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/3/12607776/index.pdf.

Testo completo
Abstract (sommario):
The thesis aims to observe the industrial design profession and to study the role of industrial designer in Turkish industry. Through an electronic questionnaire investigating the manufacturers&rsquo
and designers&rsquo
opinions about how industrial design practice is perceived and how industrial designers are utilized in Turkey it was possible to examine the current roles of industrial designers and to evaluate the status of industrial design profession. The survey also investigated how the industrial designer or the design team is situated in new product development process, and in the corporate hierarchy, what kind of investments have been made in the last decades by manufacturers in Turkey on industrial design.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Frias-Peña, Julio. "The strategic role of industrial designers in developing innovative products". Thesis, University of Nottingham, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.416315.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Alpay, Efe. "Implications Of Additive Manufacturing Applications For Industrial Design Profession From The Perspective Of Industrial Designers". Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614912/index.pdf.

Testo completo
Abstract (sommario):
The purpose of this study was to investigate the implications of additive manufacturing on industrial design profession and designers through an explorative study. Through a literature survey, implications of additive manufacturing technologies on industrial designers and industrial design profession were explored. Expanding literature survey with on-line searches, several experimental and commercial application examples of rapid manufacturing of products were identified. These identified examples were then used for a qualitative evaluation on the implications of additive manufacturing for the industrial design profession and designers through semi-structured interviews conducted with seven professional industrial designers having experience with rapid manufacturing in Istanbul Turkey. The research concluded with significant implications of additive manufacturing having the potential to cause paradigm shifts in industrial designer&rsquo
s role, definition of the profession and design process. The conclusions derived include suggestions to exploit the potential brought by these technologies and their applications.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Lin, Hui-Liang. "An identification and validation of competencies for industrial designers in Taiwan /". The Ohio State University, 1991. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487694702784329.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Lockhart, Catherine A. "Where are the women?: Women industrial designers from university to workplace". Thesis, Queensland University of Technology, 2016. https://eprints.qut.edu.au/95735/1/Catherine_Lockhart_Thesis.pdf.

Testo completo
Abstract (sommario):
This thesis explores the experience of being a woman industrial designer, from her circumstances and motivations to study industrial design, through graduation from university and to professional life. It contains both an analysis of in-depth interviews with 19 female graduates from the industrial design course at the University of Technology Sydney (Australia), and a public exhibition of both their work and their reflections on being female designers.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Laporte, de Alencar Adailton. "Designers de Mobiliário: um estudo de caso sobre o processo de configuração dos designers contemporâneos brasileiros". Universidade Federal de Pernambuco, 2011. https://repositorio.ufpe.br/handle/123456789/3548.

Testo completo
Abstract (sommario):
Made available in DSpace on 2014-06-12T16:31:54Z (GMT). No. of bitstreams: 2 arquivo7088_1.pdf: 2661673 bytes, checksum: c52bb93c46dfef8d0a4173754394ae8d (MD5) license.txt: 1748 bytes, checksum: 8a4605be74aa9ea9d79846c1fba20a33 (MD5) Previous issue date: 2011
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Essa pesquisa discursa a relação entre processo, metodologia de design e mobiliário contemporâneo brasileiro, e tem como objetivo geral analisar o processo de configuração de artefatos dos designers contemporâneos brasileiros de mobiliário, baseado no contexto de suas obras e identificando suas técnicas de criação. A abordagem da pesquisa foi conduzida pelo método dialético enquanto que para os procedimentos foram utilizados os métodos histórico e comparativo. A dissertação está dividida basicamente em duas partes: Fundamentação teórica e pesquisa. A primeira consiste em pesquisa bibliográfica baseada nos três elementos da pesquisa: Breve história do móvel no Brasil, Cultura material e imaterial brasileira e Processos de design e metodologias. A segunda parte, descreve o processo da pesquisa incluindo o levantamento da obra de designers contemporâneos em livros, revistas, websites e periódicos especializados, além das entrevistas, principal fonte de primeira mão.Como resultado, foram geradas categorias que apontam para soluções comuns ao processo de design na contemporaneidade
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Bohemia, Erik Industrial Design UNSW. "Lean manufacturing and its impact on the role of industrial designers in Australia". Awarded by:University of New South Wales. Industrial Design, 2002. http://handle.unsw.edu.au/1959.4/19087.

Testo completo
Abstract (sommario):
The aim of this research was to determine the extent of use, by Australian manufacturers, of lean manufacturing techniques, and the current and future implications for industrial designers. A survey was conducted to gather data on organisation demographics, the role of the industrial designer, production techniques and product development. The survey was distributed to 220 manufacturing organisations undertaking product development in Australia. The number of surveys returned was 134, representing a 60.9 percent response rate. The surveyed organisations represented a broad cross-section of Australian manufacturers by size, location and industry. Manufacturing organisations were categorised into three groups: lean manufacturers, emerging users of lean manufacturing and non-lean manufacturers. It was concluded that lean manufacturing is being adopted by Australian manufacturers and that lean manufacturing is impacting on the role of the industrial design. In general, the data obtained in this research confirms views expressed in the literature that describes current changes in the manufacturing industry. This literature suggests that design will become the next competitive 'weapon', and become a central part of organisational strategy. However, the data also suggests the design profession has still some way to go to adequately grasp its full professional potential, particularly in the area of product development management. The results indicate that industrial designers underperformed in five functional areas that could be considered fundamental to the service normally provided by industrial designers and they have not exceeded expectations in any of the functions included in the survey. It was found that overall, industrial designers were not regarded highly by organisations as a source of new product ideas. Another troubling finding was that industrial designers were generally not perceived as being suitable to manage product development groups. The results of this research could be used to guide educational institutions in regard to curricula for industrial design courses so that future graduates may more effectively fulfil industry requirements.
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Libri sul tema "Industrial designers"

1

Industrial Designers Society of America., a cura di. Directory of industrial designers. Great Falls,Va: Industrial Designers Society of America, 1993.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Andrej, Kupetz, e Kupetz Günter, a cura di. Günter Kupetz: Industrial design. Boston, MA: Birkhauser Publishers for Architecture, 2006.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Loewy, Raymond. Industrial design. London: Laurence King, 2000.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Loewy, Raymond. Industrial design. London: Fourth Estate, 1988.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Council, Design, a cura di. Royal designers on design: A selection of addresses by royal designers for industry. London: Design Council, 1986.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Nelly, Schnaith, a cura di. Jorge Pensi: Introducciones = introductions. Barcelona: GG, 1994.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Pensi, Jorge. Jorge Pensi. Barcelona: GG, 1994.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Ricard, André. André Ricard: Diseño industrial. [Santander]: Fundación Marcelino Botín, 2000.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Arturo, Domínguez Macouzet, Colegio de Diseñadores Industriales y Gráficos de México. e Grupo Editorial Iberoamérica, a cura di. Diseño mexicano: Industrial y gráfico. México, D.F: Colegio de Diseñadores Industriales y Gráficos de México, 1992.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Cynthia, Fleury, a cura di. Ron Arad architecture: Projects & realisations. Paris: Arums Galerie, 2009.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Capitoli di libri sul tema "Industrial designers"

1

Fricke, Gerd. "Successful Industrial Product Development". In Designers, 301–12. London: Springer London, 1998. http://dx.doi.org/10.1007/978-1-4471-1268-6_27.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Gloag, John. "Selecting Designers". In The Missing Technician in Industrial Production, 51–59. London: Routledge, 2022. http://dx.doi.org/10.1201/9781003332787-7.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Jevnaker, Birgit H. "Industrial Designers as Boundary Workers". In Managing Boundaries in Organizations, 110–28. London: Palgrave Macmillan UK, 2003. http://dx.doi.org/10.1057/9780230512559_7.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Motshubi, Sekao, Polokano Sekonopo, Matlhogonolo Letsatsi e Walter Chipambwa. "Physical Model Making for Designers". In African Industrial Design Practice, 179–89. London: Routledge, 2023. http://dx.doi.org/10.4324/9781003270249-14.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Gloag, John. "Craft Revivalists and Industrial Designers 1830-1930". In The Englishman's Chair, 253–68. London: Routledge, 2022. http://dx.doi.org/10.4324/9781003333623-12.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Thomas, Joyce, David Smith e Doris Wells-Papanek. "Studio-Based Learning Strategies Inspire Thoughtful and Purposeful Designers". In Advances in Industrial Design, 167–76. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-80829-7_21.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Vervaeke, Monique. "Industrial Designers and the Challenges of Sustainable Development". In The Greening of the Automotive Industry, 49–68. London: Palgrave Macmillan UK, 2012. http://dx.doi.org/10.1057/9781137018908_4.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Camplone, Stefania, Giuseppe Di Bucchianico e Emidio Antonio Villani. "Designing Designers Through Inclusion. A Design Experience of Career Choice Orientation". In Advances in Industrial Design, 317–23. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-80829-7_39.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Wolf, Burkhard. "When and How Do Designers in Practice Use Methods?" In Impact of Design Research on Industrial Practice, 465–72. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19449-3_30.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Comninos, Peter P. "Computer Graphics and Animation for Interior and Industrial Designers". In Computers in Art, Design and Animation, 216–24. New York, NY: Springer New York, 1989. http://dx.doi.org/10.1007/978-1-4612-4538-4_16.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Industrial designers"

1

Gregory D. Williams, Kurt A. Rosentrater e David R. Bohnhoff. "Educational Needs for Agri-Industrial Facility Designers and Managers". In 2004, Ottawa, Canada August 1 - 4, 2004. St. Joseph, MI: American Society of Agricultural and Biological Engineers, 2004. http://dx.doi.org/10.13031/2013.16890.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

David R. Bohnhoff, Sundaram Gunasekaran, Gregory D. Williams e Kurt A. Rosentrater. "An Undergraduate Engineering Curriculum for Agri-Industrial Facility Designers". In 2004, Ottawa, Canada August 1 - 4, 2004. St. Joseph, MI: American Society of Agricultural and Biological Engineers, 2004. http://dx.doi.org/10.13031/2013.16891.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Jagtap, Santosh. "SHAPING PRODUCTS: DIFFERENCES BETWEEN EXPERT AND NOVICE INDUSTRIAL DESIGNERS". In 15th International Design Conference. Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Croatia; The Design Society, Glasgow, UK, 2018. http://dx.doi.org/10.21278/idc.2018.0159.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Wognum, P. M. "Designers in Organisations". In ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2002. http://dx.doi.org/10.1115/detc2002/dtm-34028.

Testo completo
Abstract (sommario):
Design processes in current industrial contexts require integration between different disciplines and functions, not only within an organisation but also across organisational and even national borders. Many barriers to integration can be observed, however, in multi-disciplinary and multifunctional design projects. One of these barriers is the lack of organisational, management, and social knowledge and skills, on the level of team members as well as on the level of project management. To achieve a sufficient level of integration technical knowledge and skills are necessary but not sufficient. Organisational, management, and social skills are necessary too. In our research on organisation and management of business processes we have found that this last category of knowledge needs improvement for the largest part of design team members and managers. As designers are professionals who have been employed because of their knowledge and skills, gained through prior academic or professional education, the question can be asked to what extent organisational, management, and social knowledge is included in this education. One way to answer this question is by studying the knowledge and skills deemed important for performing design tasks. An important source of this knowledge can be found in journal articles in the area of engineering design. The authors of these articles are in most cases also the ones transferring this knowledge to future designers. In this paper, a study of 94 recently published journals articles is described, which reveals, that organisational, management, and social skills are not yet a major focus of attention. In particular the number of empirical studies on the organisational, social, and managerial behaviour of designers in practical contexts is scarce in the engineering research community. These results will be confronted with results from management and social sciences research. We argue that the gap between these two fields of research needs to be bridged to better prepare designers for their task in current industrial contexts.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Ghim, Yong-Gyun. "Designing Mobile Robots: A Systems Thinking Approach for Industrial Designers". In 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022). AHFE International, 2022. http://dx.doi.org/10.54941/ahfe1002024.

Testo completo
Abstract (sommario):
With robots’ presence gradually expanding to homes and public spaces, there are increasing needs for new robot development and design. Mobile robots’ autonomous and dynamic behaviors ask for new design approaches and methods that are different from the ones for designing non-robotic products. This study proposes a methodology for designing mobile robots from a systems thinking perspective to supplement the limitation of traditional industrial design approaches. A conceptual framework consisting of user, robot, and environment is proposed and task flow models are built to help designers analyze and specify complex interactions between multiple system elements. A robot system blueprint, a storyboard, and a system map are subsequently introduced to design and represent a product-service system of a robot holistically. This approach was applied to student projects for mobile robot design in a fourth-year studio course at a university’s industrial design program.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Kuys, Blair, e Wenwen Zhang. "Elucidating perceptions of Australian and Chinese industrial design from the next generation of industrial designers". In Design Research Society Conference 2016. Design Research Society, 2016. http://dx.doi.org/10.21606/drs.2016.321.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Hou, H. Y., T. H. Hou e H. J. Hu. "Social intelligence in digital library guide designers". In 2008 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, 2008. http://dx.doi.org/10.1109/ieem.2008.4738070.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Marín Granados, Manuel D., Oscar D. de Cózar Macías, E. Beatriz Blazquez Parra, Francisco J. Ortíz Zamora, Francisca J. Castillo Rueda, M. Carmen Ladrón de Guevara Muñoz, Laia Miravet Garret, Patricia Mora Segado e Isidro Ladrón de Guevara López. "TEACHING INNOVATION PROJECT AIMED AT INDUSTRIAL DESIGNERS OF THE UNIVERSITY OF MALAGA". In 12th International Technology, Education and Development Conference. IATED, 2018. http://dx.doi.org/10.21125/inted.2018.2106.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Yoshioka-Kobayashi, Tohru, e Toshiya Watanabe. "An alternative resource for technology innovation: Do industrial designers create superior invention?" In 2016 Portland International Conference on Management of Engineering and Technology (PICMET). IEEE, 2016. http://dx.doi.org/10.1109/picmet.2016.7806721.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Zhu, Y., S. J. Luo e X. H. Xu. "Research on designers' product color perception of mobile phone". In 2006 7th International Conference on Computer-Aided Industrial Design and Conceptual Design. IEEE, 2006. http://dx.doi.org/10.1109/caidcd.2006.329327.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Industrial designers"

1

Zhang, Ling, Brent Holland e Eulanda A. Sanders. Collaborative Wearable Art Design Process for Wearable Art Designers, Artists, and Industrial Designers. Ames: Iowa State University, Digital Repository, 2017. http://dx.doi.org/10.31274/itaa_proceedings-180814-1756.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Patel, R., R. W. Borio, G. Liljedahl, B. G. Miller, A. W. Scaroni e J. G. McGowan. Microfine coal firing results from a retrofit gas/oil-designed industrial boiler. Office of Scientific and Technical Information (OSTI), dicembre 1995. http://dx.doi.org/10.2172/251296.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

bin Ahsan, Wahid, Asad Uz Zaman, Sultana Nasrin Anika, Tanjina Akter, Dip Chandra Dey e Shishir Sarker. Advancing Human-Centered Design Practices Among Designers in Bangladesh: Updated Insights 2024. Userhub, giugno 2024. http://dx.doi.org/10.58947/jgvd-qwmr.

Testo completo
Abstract (sommario):
This qualitative case study explores the work processes and challenges faced by designers in Bangladesh regarding the adoption of human-centered design (HCD) methodologies. Interviews with 50 participants from various industries revealed that while Bangladeshi designers possess strong visual design skills, they often lack an understanding of HCD methodologies and face challenges such as time management, payment issues, and limited access to resources. The study underscores the need for a collaborative environment among clients, designers, and management, as well as enhanced education and resources to support HCD adoption. These insights highlight critical areas for improving design education, communication, and collaboration in Bangladesh.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Agosin, Manuel R., Christian Larraín e Nicolás Grau. Industrial Policy in Chile. Inter-American Development Bank, dicembre 2010. http://dx.doi.org/10.18235/0011370.

Testo completo
Abstract (sommario):
This paper studies three horizontal policy instruments and two vertical ones in Chilean industrial policy, particularly regarding small and medium enterprises (SMEs). The horizontal instruments are (1) a guarantee program for borrowing by SMEs (FOGAPE), (2) a small subsidy to new exports that was applied from 1985 through 2003, and (3) the innovation subsidies provided by the Corporación de Fomento de la Producción (CORFO). The vertical policy instruments are the activities of Fundación Chile (FCh), a semi-public entrepreneur cum venture capitalist, and a CORFO program to attract foreign direct investment in information technology. Although most programs are well designed, they are numerous and insufficiently funded; Chile could benefit from a prioritization of needs and consolidation of these programs. Moreover, the instruments for making strategic bets on new sectors are particularly weak. In particular, FCh needs to refocus its activities on high-risk projects with long payoffs, something it cannot do with its small endowment.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Murphy, Pamela, a cura di. IEA SHC Annual Report 2022. IEA SHC, luglio 2023. http://dx.doi.org/10.18777/ieashc-ar-2023-0001.

Testo completo
Abstract (sommario):
Our mission assumes a systematic approach to applying solar technologies and designs to whole buildings and industrial and agricultural process heat. Based on this mission, the SHC TCP will carry out and coordinate international R&D work and will continue to cooperate with other IEA Implementing Agreements and the solar industry to expand the solar market. Our activities support market expansion by providing reliable information on solar system performance, design guidelines and tools, data and market approaches, and developing and integrating advanced solar energy technologies and design strategies for the built environment and industrial and agricultural process heat applications.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Gallego, Juan Miguel, e Luis H. Gutiérrez. ICTs in Latin American and the Caribbean Firms: Stylized Facts, Programs and Policies: Knowledge Sharing Forum on Development Experiences: Comparative Experiences of Korea and Latin America and the Ca. Inter-American Development Bank, luglio 2015. http://dx.doi.org/10.18235/0007003.

Testo completo
Abstract (sommario):
Adoption of information and communication technologies (ICTs) has been slow in Latin American and the Caribbean (LAC) countries and is not widespread. There is a digital divide between and within countries, including a digital gap in firms' adoption of ICTs. Large and medium-sized enterprises generally have access to the Internet, but adoption of advanced ICTs is low for all firms in these economies, and small and micro enterprises lag way behind. The backwardness in ICT adoption is exacerbated when only a small fraction of society has high connectivity broadband. Thus the digital infrastructure remains weak despite regional governments' promotion of a digital agenda. Bolder programs are needed. The success of public initiatives requires a competitive environment for internet and telecom service providers as well strong participation of the private sector and public-private partnerships. In particular, the engagement of large firms is necessary to increase ICTs diffusion in small and medium-sized enterprises (SMEs) that are part of their production chains. Additionally, coordination among different government agencies is critical for improving ICT policies design and implementation. The relevance of well-designed ICT policies is apparent in empirical and qualitative evidence from Chile, Colombia and Uruguay, where ICT investment indicates a positive impact on firm innovation and productivity. As part of what some call the digital ecosystem, the IT industry plays an important role, but we observe large heterogeneity in the LAC region. Brazil and Mexico are two big players with relatively well-developed software and hardware industries oriented to the domestic market, while Costa Rica and Uruguay emerge as IT producers and exporters. In between, medium-sized countries like Argentina, Colombia, Peru and Ecuador are looking for a position in either their internal or external markets. To increase performance in the IT industry and complement the existing ecosystem, ICT policies must be accompanied by industrial programs that go beyond the usual horizontal industrial policies.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Баттахов, П. П. Договоры о передаче исключительных прав на объекты промышленной собственности с участием социальных предприятий. DOI CODE, 2021. http://dx.doi.org/10.18411/1818-1538-2021-55669.

Testo completo
Abstract (sommario):
The article considers contractual designs aimed at transferring exclusive rights to industrial property. The problem of the contractual process was identified when concluding a contract on the transfer of a set of exclusive rights. Based on the study, a number of changes to Russian laws have been proposed. First of all, this applies to a commercial concession contract. The author proposes to amend the Civil Code of the Russian Federation by supplementing the article on commercial concession with the right of organizations that do not conduct commercial activities to conclude the same contracts on a general basis. The appropriateness of applying the classification of transactions into real and consensual ones in relation to this contract is justified. The peculiarities of transfer of the complex of exclusive rights to objects of industrial property with participation of social enterprises under the legislation of the Russian Federation are studied.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Fernández Gómez, Jorge, e Jaime Menéndez Sánchez. Development of the hydrogen system in the Basque Country in the medium term. A cura di Patricia Canto. Universidad de Deusto, 2023. http://dx.doi.org/10.18543/ukhn2572.

Testo completo
Abstract (sommario):
This report analyzes the possible evolution of the hydrogen transport infrastructure system in the Basque Country in the medium term. The objective of the work is threefold: (1) to characterize medium-term infrastructure development scenarios (over a 10-15 year horizon); (2) to identify key factors that influence the development of the Basque hydrogen system and analyze their potential impact on the determination of the medium-term scenario; (3) to draw conclusions of a strategic nature for the Basque Country. The hydrogen production-transport system scenarios analyzed range from a totally decentralized scenario (with production infrastructures on site, at consumption facilities or in industrial hubs) to a totally centralized system designed on the basis of the current gas network. The main conclusion of the report is that the optimal strategy in the short term from the point of view of the Basque Country involves supporting a rapid deployment of hydrogen in industrial hubs (Port of Bilbao area), while a wait-and-see position should be maintained to see how the sector develops in the coming years to advance in the configuration of infrastructures in the longer term.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Greene, Anne, Kelly Waldron e Nuala Calnan. Quality Risk Management: State of the Industry—Part 1. Has the Industry Realized the Full Value of ICH Q9? Institute of Validation Technology, gennaio 2014. http://dx.doi.org/10.1080/21507090.ar1152014agkwnc-qrmsoi.

Testo completo
Abstract (sommario):
This paper summarizes research designed to characterize the current state of pharmaceutical and biotechnology industries with respect to the adoption of Quality Risk Management as per ICH Q9. The research supports the hypotheses that the full value of QRM with respect to product quality and patient safety has not yet been realized. In addition, industry appears to be lagging behind regulatory expectations with respect to QRM maturity, indicating that current approaches to QRM require significant improvement.
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Mohammed, Anne-Marie, Ramiro Moya e Sandra Sookram. Productive Development Policies in Trinidad and Tobago: A Critical Review. Inter-American Development Bank, gennaio 2010. http://dx.doi.org/10.18235/0010822.

Testo completo
Abstract (sommario):
Even as Trinidad and Tobago seeks productive diversification away from the energy sector, the process underlying the countrys productive development policies (PDP) is in a state of transition from state-directed industrial policy to a newer approach with extensive private-public participation. This study explores the main characteristics of four PDPs in Trinidad and Tobago and reviews them following the related literature (e.g., Rodríguez-Clare, 2005a and 2005b, and Melo and Rodríguez-Clare, 2006). The four PDPs are: a) The process towards the Promotion of Clusters; b) the PDPs for the Tourism industry; c) the classical PDPs for Micro, Small and Medium Enterprises and; d) the Free Trade Zone as a policy designed to compensate for the failure of the State.
Gli stili APA, Harvard, Vancouver, ISO e altri
Ti possono interessare anche gli elenchi estesi di opere sul tema "Industrial designers":
Articoli di riviste Tesi Libri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia