Letteratura scientifica selezionata sul tema "Inconel625"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Inconel625".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Inconel625"
Ding, Yuhang, Wenya Bi, Cheng Zhong, Tao Wu e Wanyuan Gui. "A Comparative Study on Microstructure and Properties of Ultra-High-Speed Laser Cladding and Traditional Laser Cladding of Inconel625 Coatings". Materials 15, n. 18 (15 settembre 2022): 6400. http://dx.doi.org/10.3390/ma15186400.
Testo completoMa, Hong, Shu Zhong Wang, Mei Gao e Sheng Wen. "Research on the Corrosion Behavior of Nickel Base Alloy in Municipal Sludge Treated by Supercritical Water Oxidation". Advanced Materials Research 1010-1012 (agosto 2014): 220–24. http://dx.doi.org/10.4028/www.scientific.net/amr.1010-1012.220.
Testo completoMinemura, Y., Y. Kondoh, H. Funakubo e Hiroshi Uchida. "One-Axis-Oriented Crystal Growth of Lead Zirconate Titanate Thin Films on Metal Substrates Using Perovskite-Type Oxide Nanosheet Layer". Key Engineering Materials 582 (settembre 2013): 15–18. http://dx.doi.org/10.4028/www.scientific.net/kem.582.15.
Testo completoChumaevsky, A. V., A. O. Panfilov, K. N. Kalashnikov, A. P. Zykova, T. A. Kalashnikova, A. V. Vorontsov, S. Yu Nikonov et al. "Production of metal matrix composites based on aluminum-manganese bronze and nickel alloys by wire feed electron-beam additive manufacturing". Diagnostics, Resource and Mechanics of materials and structures, n. 6 (dicembre 2022): 65–75. http://dx.doi.org/10.17804/2410-9908.2022.6.065-075.
Testo completoJia, Zhi, Zexi Gao, Jinjin Ji, Dexue Liu, Tingbiao Guo e Yutian Ding. "Study of the Dynamic Recrystallization Process of the Inconel625 Alloy at a High Strain Rate". Materials 12, n. 3 (8 febbraio 2019): 510. http://dx.doi.org/10.3390/ma12030510.
Testo completoMattli, Manohar Reddy, Adnan Khan, Penchal Reddy Matli, Moinuddin Yusuf, A. Al Ashraf, R. A. Shakoor e Manoj Gupta. "Effect of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites". Materials Today Communications 25 (dicembre 2020): 101564. http://dx.doi.org/10.1016/j.mtcomm.2020.101564.
Testo completoMa, Hong Fang, Ming Zhu, Qing Zhu e Yan Li. "Corrosion Behaviors of Thermal Diffusion Coating on the Surface of Inconel625 Alloy in Chloride Molten Salts". Materials Science Forum 809-810 (dicembre 2014): 589–95. http://dx.doi.org/10.4028/www.scientific.net/msf.809-810.589.
Testo completoDosta, Sergi, Nuria Cinca, Alessio Silvello e Irene G. Cano. "Alumina Reinforcement of Inconel 625 Coatings by Cold Gas Spraying". Metals 10, n. 9 (18 settembre 2020): 1263. http://dx.doi.org/10.3390/met10091263.
Testo completoZheng, Chuan Lin, Fu Zhai Cui, Qing Ling Feng, Z. Xu, Xi Shan Xie e Zhi Yong He. "Oxidation Resistance of TiAl-Inconel625 Graded Alloying Layer". Materials Science Forum 423-425 (maggio 2003): 81–84. http://dx.doi.org/10.4028/www.scientific.net/msf.423-425.81.
Testo completoHwang, Ye-Han, Choon-Man Lee e Dong-Hyeon Kim. "The Effects of the Variable-Pressure Rolling of a Wire Arc Additively Manufactured Inconel625-SS308L Bimetallic Structure". Applied Sciences 13, n. 18 (11 settembre 2023): 10187. http://dx.doi.org/10.3390/app131810187.
Testo completoTesi sul tema "Inconel625"
Contri, Boris. "Procédés d’assemblages céramique – métal : étude des couples Inconel®625 – Alumine et Titane Zirconium Molybdène (TZM) – Carbure de silicium". Electronic Thesis or Diss., Limoges, 2023. http://www.theses.fr/2023LIMO0093.
Testo completoThis work has for objective to present the results obtained for the ceramic-metal bonding by hot-pressing in two cases: Inconel®625 / Alumina and TZM / Silicon carbide. All the thesis take place according to the last results obtained for similar bonding, in the laboratory IRCER, by studying the feasibility of direct bonding and bonding after pre-oxidising the metal part. A part of this study is then dedicated to the oxidation behaviour of inconel®625 under CO2 using a thermobalance with a sample hot introduction. Using the oxidation kinetics obtained, the reaction mechanism is proposed and the conditions for the metal pre-oxidation determined.Then during the manuscript are presented the processes and the results obtained after variations of parameters such as temperature and the heat treatment time for the two couples of materials. The absence of inter-phase formation in the couple Inconel®625 / Alumina and the formation of a complex inter-phase in the couple TZM / Silicon carbide allow us to propose two studies with different metal-ceramic bonding.A last part is dedicated to the characterization and the understanding of the bonding obtained in each case. To explain the properties of the samples obtained we used scaning electron microscopy but also numerical simulation for the first couple Inconel®625 / Alumina and tensile test for the second couple TZM / Silicon carbide
HUANG, QING-ZHOU, e 黃慶州. "添加劑輔助之Inconel617大間隙硬銲". Thesis, 1993. http://ndltd.ncl.edu.tw/handle/41363590531383765288.
Testo completoSweta, Saroj. "Deposition of TiC-INCONELl825 Composite Coating on AISI 304 Steel By TIG Cladding Process". Thesis, 2017. http://ethesis.nitrkl.ac.in/8979/1/2017_MT_SSaroj.pdf.
Testo completoSu, Jiun-Shiang, e 蘇俊祥. "Measurement of resistance ohm value parameters at both ends of a nickel-based alloy (INCONEL601) cable wire connector using crimping and argon welding". Thesis, 2017. http://ndltd.ncl.edu.tw/handle/hwy9zg.
Testo completo元智大學
機械工程學系
105
The function of the cable conductor, the importance of the relevant industry, like the blood vessels in the human body, is a transport organ. For electrical, electrical, telecommunications, mechanical and industrial engineering industry, as long as the need to use the place to live, the cable is a cable can not be missing transmission [1]. Cable wires are roughly divided into two categories: the first type of classification, the second to the classification of the composition of the wire. The first type of appearance can be divided into four categories: a bare wire, insulated wire, cable, special wire, which in turn the most widely used cable and special wire; the second composition can be divided into five: , Single line, white flat wire, stranded wire, cable. The cable class is subdivided into 1. Power cable class 2. Communication cable class 3. Fiber optic cable class 4. Control cable type. This article explores the parts of the power cable. The part of the cable wire material used in this study is the material of INCONEL601. The prominent feature of INCONEL alloy is the high temperature oxidation resistance. It is generally used in high temperature environment above 540 ℃, and it is different according to its use. Alloy design, and more for special corrosion resistance, high temperature corrosion environment, to be equipped with high temperature mechanical strength of the equipment [2]. It is resistant to oxidation at 2200 ° F (1200 ° C). Can be used for high temperature long-term use, and not oxidation. In this study, different crimp methods and argon welding were used to measure the ohmic values of the electrical leads in different states and to find the best parameters. The results show that, with different crimping methods and different welding methods, with the instrument after the test will indeed have an ohmic value of the cable lead to different aspects of the impact.
Capitoli di libri sul tema "Inconel625"
Sun, Deshun, Xingzhi Jiang, Jianzhong Shi, Jianhua Huang e Yongzhong Jiang. "Hot Forging Behavior of Inconel625 Superalloy Based on Processing Map". In High Performance Structural Materials, 643–52. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0104-9_67.
Testo completoVemanaboina, Harinadh, R. Gopi Chandh, P. Sivakrishna, A. Kishore Kumar, K. Malli Karjuna e Y. Sailinga Reddy. "A X-Ray Diffraction Study of Residual Stresses Due to Multipass Welding of INCONEL600". In Advances in Lightweight Materials and Structures, 561–67. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-7827-4_57.
Testo completoYang, Min, Zeng Da Zou, Si Li Song e Xin Hong Wang. "Effect of Interlayer Thickness on Strength and Fracture of Si3N4 and Inconel600 Joint". In Key Engineering Materials, 2435–40. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-978-4.2435.
Testo completoYuan, Xuemin, Shengju Yang, Qian Zhen e Zhonglei Zhao. "Discussion on Smelting Technology of Inconel600 Nickel-Ferrochrome Alloy". In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220417.
Testo completoAtti di convegni sul tema "Inconel625"
Vemanaboin, Harinadh, A. R. Babu, B. Vishnu Vardhana Naidu e R. Raman Goud. "Distortion distribution in CO2 laser beam welds of SS316L to INCONEL625 plates". In INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS SCIENCE, STRUCTURES, AND MANUFACTURING. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0168195.
Testo completoZhang, Yu-Cai, Wenchun Jiang, Shan-Tung Tu, Xian-Cheng Zhang e Guo-Yan Zhou. "Analysis of Creep Crack Growth Behavior of the Brazed Joint Using Continuum Damage Mechanics Approach". In ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-85126.
Testo completoWang, Qiuhao, Wei Zheng, Huaqiang Yin, Shengqiang Li, Xuedong He e Tao Ma. "Corrosion of High Temperature Alloys in the Primary Coolant of HTGR Under Very-High Temperature Operation". In 2020 International Conference on Nuclear Engineering collocated with the ASME 2020 Power Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/icone2020-16074.
Testo completo