Accedi

Bibliografie tematiche / Hybrid additive manufacturing

Letteratura scientifica selezionata sul tema "Hybrid additive manufacturing"

Autore: Grafiati

Pubblicato: 8 giugno 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Hybrid additive manufacturing".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Articoli di riviste sul tema "Hybrid additive manufacturing":

1

Layher, Michel, Jens Bliedtner e René Theska. "Hybrid additive manufacturing". PhotonicsViews 19, n. 5 (ottobre 2022): 47–51. http://dx.doi.org/10.1002/phvs.202200041.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Sarobol, Pylin, Adam Cook, Paul G. Clem, David Keicher, Deidre Hirschfeld, Aaron C. Hall e Nelson S. Bell. "Additive Manufacturing of Hybrid Circuits". Annual Review of Materials Research 46, n. 1 (luglio 2016): 41–62. http://dx.doi.org/10.1146/annurev-matsci-070115-031632.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Langer, Lukas, Matthias Schmitt, Georg Schlick e Johannes Schilp. "Hybride Fertigung mittels Laser-Strahlschmelzen/Hybrid manufacturing by laser-based powder bed fusion". wt Werkstattstechnik online 111, n. 06 (2021): 363–67. http://dx.doi.org/10.37544/1436-4980-2021-06-7.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

Die additive Fertigung ermöglicht komplexe Geometrien und individualisierte Bauteile. Die hohen Material- und Fertigungskosten können ein Hindernis für einen wirtschaftlichen Einsatz sein. In der hybriden additiven Fertigung werden die Vorteile konventioneller sowie additiver Fertigungsverfahren kombiniert. Für eine weitere Steigerung der Wirtschaftlichkeit und Effizienz werden nichtwertschöpfende Schritte der Prozesskette identifiziert und Automatisierungsansätze entwickelt.   Additive manufacturing enables complex geometries and individualized components. However, high material and manufacturing costs can be a hindrance for economical use. Hybrid additive manufacturing combines the advantages of conventional with additive manufacturing processes. For a further increase in profitability and efficiency, non-value-adding steps in the process chain are identified and automation approaches developed.

4

Yue, Wenwen, Yichuan Zhang, Zhengxin Zheng e Youbin Lai. "Hybrid Laser Additive Manufacturing of Metals: A Review". Coatings 14, n. 3 (6 marzo 2024): 315. http://dx.doi.org/10.3390/coatings14030315.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

Due to the unparalleled benefits of traditional processing techniques, additive manufacturing technology has experienced rapid development and continues to expand its applications. However, as industrial standards advance, the pressing needs for high precision, high performance, and high efficiency in the manufacturing sector have emerged as critical bottlenecks hindering the technology’s progress. Single-laser additive manufacturing methods are insufficient to meet these demands. This review presents a comprehensive exploration of metal hybrid laser additive manufacturing technology, encompassing various aspects, such as multi-process hybrid laser additive manufacturing, additive–subtractive hybrid manufacturing, multi-energy hybrid additive manufacturing, and multi-material hybrid additive manufacturing. Through a thorough examination of the principles of laser additive manufacturing technology and the concept of hybrid manufacturing, this paper investigates in depth the notable advantages of hybrid laser additive manufacturing technology. It provides valuable insights and recommendations to guide the development and research of innovative machining technologies.

5

Pragana, João P. M., Stephan Rosenthal, Ivo M. F. Bragança, Carlos M. A. Silva, A. Erman Tekkaya e Paulo A. F. Martins. "Hybrid Additive Manufacturing of Collector Coins". Journal of Manufacturing and Materials Processing 4, n. 4 (9 dicembre 2020): 115. http://dx.doi.org/10.3390/jmmp4040115.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

The objective of this paper is to present a new hybrid additive manufacturing route for fabricating collector coins with complex, intricate contoured holes. The new manufacturing route combines metal deposition by additive manufacturing with metal cutting and forming, and its application is illustrated with an example consisting of a prototype coin made from stainless steel AISI 316L. Experimentation and finite element analysis of the coin minting operation with the in-house computer program i-form show that the blanks produced by additive manufacturing and metal cutting can withstand the high compressive pressures that are attained during the embossing and impressing of lettering and other reliefs on the coin surfaces. The presentation allows concluding that hybrid additive manufacturing opens the way to the production of innovative collector coins with geometric features that are radically different from those that are currently available in the market.

6

Seifarth, C., R. Nachreiner, S. Hammer, Jörg Hildebrand, J. P. Bergmann, M. Layher, A. Hopf et al. "Hybride additive Multimaterialbearbeitung/Hybrid additive Multi Material Processing – High-resolution hybrid additive Multimaterial production of individualized products". wt Werkstattstechnik online 109, n. 06 (2019): 417–22. http://dx.doi.org/10.37544/1436-4980-2019-06-19.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

Das Ziel von HyAdd3D ist es, mit neuer Anlagentechnik komplexe Bauteile additiv zu fertigen und gleichzeitig den Anforderungen einer Multimaterialfertigung gerecht zu werden. Das Projekt umfasst die Entwicklung einer hybriden Verfahrenslösung, welche in der Lage ist, neue Materialien mit funktionalen Zusatzstoffen zu verarbeiten. Der Beitrag beschreibt den HyAdd3D-Ansatz und beleuchtet den aktuellen Projektstand. Abschließend werden die aktuellen Ergebnisse zusammengefasst und ein Ausblick auf die folgenden Entwicklungsschritte gegeben.   The aim of HyAdd3D is to create complex additive manufactured components with novel equipment technology whilst simultaneously fulfilling the requirements of the multi-material manufacturing process. The project engages in developing a hybrid procedure solution that is able to process new materials with functional additives. This article describes the HyAdd3D approach and examines the current project status. All relevant findings are summarized to conclude and further developing measures are explained.

7

Popov, Vladimir V., e Alexander Fleisher. "Hybrid additive manufacturing of steels and alloys". Manufacturing Review 7 (2020): 6. http://dx.doi.org/10.1051/mfreview/2020005.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

Hybrid additive manufacturing is a relatively modern trend in the integration of different additive manufacturing techniques in the traditional manufacturing production chain. Here the AM-technique is used for producing a part on another substrate part, that is manufactured by traditional manufacturing like casting or milling. Such beneficial combination of additive and traditional manufacturing helps to overcome well-known issues, like limited maximum build size, low production rate, insufficient accuracy, and surface roughness. The current paper is devoted to the classification of different approaches in the hybrid additive manufacturing of steel components. Additional discussion is related to the benefits of Powder Bed Fusion (PBF) and Direct Energy Deposition (DED) approaches for hybrid additive manufacturing of steel components.

8

Parupelli, Santosh Kumar, e Salil Desai. "Understanding Hybrid Additive Manufacturing of Functional Devices". American Journal of Engineering and Applied Sciences 10, n. 1 (1 gennaio 2017): 264–71. http://dx.doi.org/10.3844/ajeassp.2017.264.271.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Li, J., T. Wasley, T. T. Nguyen, V. D. Ta, J. D. Shephard, J. Stringer, P. Smith, E. Esenturk, C. Connaughton e R. Kay. "Hybrid additive manufacturing of 3D electronic systems". Journal of Micromechanics and Microengineering 26, n. 10 (23 agosto 2016): 105005. http://dx.doi.org/10.1088/0960-1317/26/10/105005.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Liu, Jikai, e Albert C. To. "Topology optimization for hybrid additive-subtractive manufacturing". Structural and Multidisciplinary Optimization 55, n. 4 (29 agosto 2016): 1281–99. http://dx.doi.org/10.1007/s00158-016-1565-4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Hybrid additive manufacturing":

1

Bandiera, Nicholas Graham. "Hybrid inkjet and direct-write multi-material additive manufacturing". Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/111774.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2017.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 77-79).
Recently there has been a trend towards combining multiple forms of additive manufacturing together for increased functionality, freedom and efficiency. In this work, two forms of multiple-material additive manufacturing technologies - inkjet and direct-ink writing - are combined in a hybrid system. Several advantages are realized due to the increased material library and geometric freedom as a result of new printing modalities. Initially, models of each process are reviewed and the processes are evaluated for compatibility. Then, the precision machine design of a passively-indexed, carousel-style, syringe tool holder is completed. An error budget employing Homogeneous Transformation Matrices was maintained to estimate the tooltip errors. In order to register these two non-contact printing processes, a unique approach to their registration to a common global origin was necessary. A single non-contact optical CCD micrometer is used to register the three spatial coordinates of the syringe tooltip. Measurements are performed to characterize the repeatability of the nozzle registration scheme and the constructed gantry and carousel system, which well exceeds the requirements and the predictions from the conservative error budget. This novel system can print with a wide array of inks, including those that solidify via polymerization or crosslinking, two part chemistries, solvent evaporation or sintering, as well as liquids, gels and pastes. These materials can have a wide range of mechanical properties and functionalities, for example electrical conductivity or force sensitive resistivity. Models for the extrudate flow rate are used alongside experimental determination of the extrudate cross-section to ensure accurate process congruence. Finally, printed results demonstrate the various printing techniques, highlight the expanded material library, and display novel assemblies not possible with conventional additive processes. One such example is a fully printed pressure sensor array.
by Nicholas Graham Bandiera.
S.M.

2

Bandiera, Nicholas Graham. "Hybrid inkjet and direct-write multi-material additive manufacturing". Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/111774.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2017.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 77-79).
Recently there has been a trend towards combining multiple forms of additive manufacturing together for increased functionality, freedom and efficiency. In this work, two forms of multiple-material additive manufacturing technologies - inkjet and direct-ink writing - are combined in a hybrid system. Several advantages are realized due to the increased material library and geometric freedom as a result of new printing modalities. Initially, models of each process are reviewed and the processes are evaluated for compatibility. Then, the precision machine design of a passively-indexed, carousel-style, syringe tool holder is completed. An error budget employing Homogeneous Transformation Matrices was maintained to estimate the tooltip errors. In order to register these two non-contact printing processes, a unique approach to their registration to a common global origin was necessary. A single non-contact optical CCD micrometer is used to register the three spatial coordinates of the syringe tooltip. Measurements are performed to characterize the repeatability of the nozzle registration scheme and the constructed gantry and carousel system, which well exceeds the requirements and the predictions from the conservative error budget. This novel system can print with a wide array of inks, including those that solidify via polymerization or crosslinking, two part chemistries, solvent evaporation or sintering, as well as liquids, gels and pastes. These materials can have a wide range of mechanical properties and functionalities, for example electrical conductivity or force sensitive resistivity. Models for the extrudate flow rate are used alongside experimental determination of the extrudate cross-section to ensure accurate process congruence. Finally, printed results demonstrate the various printing techniques, highlight the expanded material library, and display novel assemblies not possible with conventional additive processes. One such example is a fully printed pressure sensor array.
by Nicholas Graham Bandiera.
S.M.

3

Joshi, Anay. "Geometric Complexity based Process Selection and Redesign for Hybrid Additive Manufacturing". University of Cincinnati / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ucin151091601846356.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Strong, Danielle B. "Analysis of AM Hub Locations for Hybrid Manufacturing in the United States". Youngstown State University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ysu1495202496133841.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Gamaralalage, Sanjeewa S. J. "Additive Based Hybrid Manufacturing Workstations to Reuse and Repair PrismaticPlastic Work Parts". Ohio University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1480512115077584.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Momsen, Timothy Benjamin. "Hybrid additive manufacturing platform for the production of composite wind turbine blade moulds". Thesis, Nelson Mandela Metropolitan University, 2017. http://hdl.handle.net/10948/19091.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

This dissertation discusses the application of additive manufacturing technologies for production of a large-scale rapid prototyping machine, which will be used to produce moulds for prototype composite turbine blades for the emerging renewables energy industry within the Eastern Cape region in South Africa. The conceptualization and design of three complete printer builds resulted in the amalgamation of a final system, following stringent theoretical design, simulation, and feasibility analysis. Following the initial product design cycle stage, construction and performance testing of a large-scale additive manufacturing platform were performed. In-depth statistical analysis of the mechatronic system was undertaken, particularly related to print-head locational accuracy, repeatability, and effects of parameter variation on printer performance. The machine was analysed to assess feasibility for use in the mould-making industry with accuracy and repeatability metrics of 0.121 mm and 0.156 mm rivalling those produced by some of the more accurate fused deposition modellers commercially available. The research data gathered serves to confirm that rapid prototyping is a good alternative manufacturing method for wind turbine blade plug and mould production.

7

Northrup, Nathan Joseph. "Durability of Hybrid Large Area Additive Tooling for Vacuum Infusion of Composites". BYU ScholarsArchive, 2019. https://scholarsarchive.byu.edu/etd/7759.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

The purpose of this research was to scientifically validate potential cost-saving measures for production of large area additively manufactured tooling for vacuum infusion of composites. These cost saving measures included using a hybrid additive/subtractive manufacturing system to fabricate the mold, requiring lower capital cost and creating shorter lead times. Fiberglass reinforcement was used instead of carbon in the mold material. The validation was done by designing and fabricating a mold for a custom test artifact and analyzing the surface geometry over the course of multiple infusions until tool failure.After printing and machining, the mold required a sealer in order to maintain vacuum integrity. The mold was able to produce 10 parts successfully before the sealed tool surface began to tangibly roughen, resulting in increased difficulty of demolding and a rougher surface finish. After the 14th infusion, the part required destructive force to be removed from the mold. The surface geometry remained consistent within ±0.5 mm of the design over the course of the infusions, and no significant trends in tool wear were observed during this time. In order to quantify the change in roughness, profilometry measurements were taken on the finished mold, and the measured area roughness value SA changed from 0.293 μm to 2.27 μm over the course of the infusions.Based on these results, it was concluded that an increase in surface adhesion is the principal mode of tool failure over the life of these tools. In addition, it was concluded that the minimum tool life for this combination of mold making methods and materials is 14 parts, as this result was obtained under an extreme case in abrasive part geometry and materials for vacuum infusion processing. Thus, this combination of methods and materials is suitable for prototyping of composite parts or short production runs.

8

Perini, Matteo. "Additive manufacturing for repairing: from damage identification and modeling to DLD processing". Doctoral thesis, Università degli studi di Trento, 2020. http://hdl.handle.net/11572/268434.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

The arrival on the market of a new kind of CNC machines which can both add and remove material to an object paved the way to a new approach to the problem of repairing damaged components. The additive operation is performed by a Direct Laser Deposition (DLD) tool, while the subtractive one is a machining task. Up to now, repair operations have been carried out manually and for this reason they are errors prone, costly and time consuming. Refurbishment can extend the life of a component, saving raw materials and resources. For these reasons, using a precise and repeatable CNC machine to repair valuable objects is therefore very attractive for the sake of reliability and repeatability, but also from an economical and environmental point of view. One of the biggest obstacles to the automation of the repairing process is represented by the fact that the CAM software requires a solid CAD model of the damage to create the toolpaths needed to perform additive operations. Using a 3D scanner the geometry of the damaged component can be reconstructed without major difficulties, but figuring out the damage location is rather difficult. The present work proposes the use of octrees to automatically detect the damaged spot, starting from the 3D scan of the damaged object. A software named DUOADD has been developed to convert this information into a CAD model suitable to be used by the CAM software. DUOADD performs an automatic comparison between the 3D scanned model and the original CAD model to detect the damaged area. The detected volume is then exported as a STEP file suitable to be used directly by the CAM. The new workflow designed to perform a complete repair operation is described placing the focus on the coding part. DUOADD allows to approach the repairing problem from a new point of view which allows savings of time and financial resources. The successful application of the entire process to repair a damaged die for injection molding is reported as a case study. In the last part of this work the strategies used to apply new material on the worn area are described and discussed. This work also highlights the importance of using optimal parameters for the deposition of the new material. The procedures to find those optimal parameters are reported, underlying the pros and cons. Although the DLD process is very energy efficient, some issues as thermal stresses and deformations are also reported and investigated, in an attempt to minimize their effects.

9

Perini, Matteo. "Additive manufacturing for repairing: from damage identification and modeling to DLD processing". Doctoral thesis, Università degli studi di Trento, 2020. http://hdl.handle.net/11572/268434.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

The arrival on the market of a new kind of CNC machines which can both add and remove material to an object paved the way to a new approach to the problem of repairing damaged components. The additive operation is performed by a Direct Laser Deposition (DLD) tool, while the subtractive one is a machining task. Up to now, repair operations have been carried out manually and for this reason they are errors prone, costly and time consuming. Refurbishment can extend the life of a component, saving raw materials and resources. For these reasons, using a precise and repeatable CNC machine to repair valuable objects is therefore very attractive for the sake of reliability and repeatability, but also from an economical and environmental point of view. One of the biggest obstacles to the automation of the repairing process is represented by the fact that the CAM software requires a solid CAD model of the damage to create the toolpaths needed to perform additive operations. Using a 3D scanner the geometry of the damaged component can be reconstructed without major difficulties, but figuring out the damage location is rather difficult. The present work proposes the use of octrees to automatically detect the damaged spot, starting from the 3D scan of the damaged object. A software named DUOADD has been developed to convert this information into a CAD model suitable to be used by the CAM software. DUOADD performs an automatic comparison between the 3D scanned model and the original CAD model to detect the damaged area. The detected volume is then exported as a STEP file suitable to be used directly by the CAM. The new workflow designed to perform a complete repair operation is described placing the focus on the coding part. DUOADD allows to approach the repairing problem from a new point of view which allows savings of time and financial resources. The successful application of the entire process to repair a damaged die for injection molding is reported as a case study. In the last part of this work the strategies used to apply new material on the worn area are described and discussed. This work also highlights the importance of using optimal parameters for the deposition of the new material. The procedures to find those optimal parameters are reported, underlying the pros and cons. Although the DLD process is very energy efficient, some issues as thermal stresses and deformations are also reported and investigated, in an attempt to minimize their effects.

10

Juhasz, Michael J. "In and Ex-Situ Process Development in Laser-Based Additive Manufacturing". Youngstown State University / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=ysu15870552278358.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Hybrid additive manufacturing":

1

Shrivastava, Parnika, Anil Dhanola e Kishor Kumar Gajrani. Hybrid Metal Additive Manufacturing. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003406488.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Torres Marques, António, Sílvia Esteves, João P. T. Pereira e Luis Miguel Oliveira, a cura di. Additive Manufacturing Hybrid Processes for Composites Systems. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-44522-5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Manogharan, Guha. Hybrid Additive Manufacturing: Techniques, Applications and Benefits. Elsevier Science & Technology Books, 2020.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Marques, António Torres, Sílvia Esteves, João P. T. Pereira e Luis Miguel Oliveira. Additive Manufacturing Hybrid Processes for Composites Systems. Springer International Publishing AG, 2021.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Marques, António Torres, Sílvia Esteves, João P. T. Pereira e Luis Miguel Oliveira. Additive Manufacturing Hybrid Processes for Composites Systems. Springer, 2020.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Manogharan, Guha. Hybrid Additive Manufacturing: Techniques, Applications and Benefits. Elsevier Science & Technology, 2020.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Ramakrishna, Seeram, Chander Prakash e Sunpreet Singh. Additive, Subtractive, and Hybrid Technologies: Recent Innovations in Manufacturing. Springer International Publishing AG, 2022.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Government, U. S., Subcommittee on Advanced Manufacturing e National Science and Technology Council. Strategy for American Leadership in Advanced Manufacturing: October 2018 Report on Smart Systems, Robotics and Cobots, Artificial Intelligence, Additive, Materials, Semiconductors, Hybrid Electronics. Independently Published, 2019.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Capitoli di libri sul tema "Hybrid additive manufacturing":

1

Srivastava, Manu, Sandeep Rathee, Sachin Maheshwari e T. K. Kundra. "Hybrid Additive Manufacturing". In Additive Manufacturing, 205–34. Boca Raton, FL : CRC Press/Taylor & Francis Group, 2019.: CRC Press, 2019. http://dx.doi.org/10.1201/9781351049382-15.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Sharma, Arun, Aarti Rana e Dilshad Ahmad Khan. "Hybrid Additive Manufacturing". In Futuristic Manufacturing, 41–62. London: CRC Press, 2023. http://dx.doi.org/10.1201/9781003270027-3.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Gibson, Ian, David Rosen, Brent Stucker e Mahyar Khorasani. "Hybrid Additive Manufacturing". In Additive Manufacturing Technologies, 347–66. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-56127-7_12.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Wang, Hao, Yan Jin Lee, Yuchao Bai e Jiong Zhang. "Hybrid Additive Manufacturing". In Post-Processing Techniques for Metal-Based Additive Manufacturing, 203–24. New York: CRC Press, 2023. http://dx.doi.org/10.1201/9781003272601-9.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Karunakaran, K. P. "Hybrid Manufacturing". In Springer Handbook of Additive Manufacturing, 425–41. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-20752-5_26.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Alex, Y., Nidhin Divakaran e Smita Mohanty. "Additive manufacturing for society". In Hybrid Metal Additive Manufacturing, 222–42. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003406488-13.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Kumaran, M. "Hybrid Additive Manufacturing Technologies". In Handbook of Smart Manufacturing, 251–63. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003333760-13.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Bambam, Arun Kumar, Prameet Vats, Alok Suna e Kishor Kumar Gajrani. "Hybrid metal additive manufacturing technology". In Hybrid Metal Additive Manufacturing, 1–18. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003406488-1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Abhilash, P. M., Jibin Boban, Afzaal Ahmed e Xichun Luo. "Digital twin-driven additive manufacturing". In Hybrid Metal Additive Manufacturing, 196–221. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003406488-12.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Francis Luther King, M., G. Robert Singh, A. Gopichand e V. Srinivasan. "Additive manufacturing for Industry 4.0". In Hybrid Metal Additive Manufacturing, 173–95. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003406488-11.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Hybrid additive manufacturing":

1

Rennen, Philipp, Noor Khader, Norman Hack e Harald Kloft. "A Hybrid Additive Manufacturing Approach". In ACADIA 2021: Realignments: Toward Critical Computation. ACADIA, 2021. http://dx.doi.org/10.52842/conf.acadia.2021.428.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Feng, Yanling, e Guozhu Jia. "Scheduling under hybrid mode with additive manufacturing". In 2015 IEEE 19th International Conference on Computer Supported Cooperative Work in Design (CSCWD). IEEE, 2015. http://dx.doi.org/10.1109/cscwd.2015.7230972.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Tičkūnas, Titas, Mangirdas Malinauskas, Domas Paipulas, Yves Bellouard e Roaldas Gadonas. "Hybrid laser 3D microprocessing in glass/polymer micromechanical sensor: towards chemical sensing applications". In 3D Printed Optics and Additive Photonic Manufacturing, a cura di Georg von Freymann, Alois M. Herkommer e Manuel Flury. SPIE, 2018. http://dx.doi.org/10.1117/12.2307533.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Reginald Elvis, Peter Francis, e Senthilkumaran Kumaraguru. "Material Efficiency and Economics of Hybrid Additive Manufacturing". In ASME 2021 16th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/msec2021-63739.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

Abstract In the past few years, Hybrid Additive Manufacturing has emerged to take advantage of both Additive Manufacturing and Subtractive Manufacturing processes and also to overcome the limitation of one process with the other. In aerospace applications, material wastage has become an issue in conventional machining process which reflects in total production cost and time. Especially, when dealing with expensive materials, conventional processes lack material efficiency with high buy-to-fly ratio which results in increased material cost. This paper deals with Hybrid Additive Manufacturing involving two different volume partitioning strategies — (i) Feature-based volume partitioning method (ii) Stock-based near net-shaping volume partitioning method to discuss the economics and material efficiency of Hybrid Additive Manufacturing process via simple cost estimator (formulated from the existing literature) by comparing these two volume partitioning strategies through suitable case studies — (i) Turbine blade and (ii) Impeller. From the results, it was found that the feature-based volume partitioning method was found to be material efficient and cost effective than the stock based near net shaping volume partitioning method in both the case studies.

5

Ortiz-Fernandez, R., e B. Jodoin. "Hybrid Additive Manufacturing Technology—Induction Heating Cold Spray". In ITSC2021, a cura di F. Azarmi, X. Chen, J. Cizek, C. Cojocaru, B. Jodoin, H. Koivuluoto, Y. C. Lau et al. ASM International, 2021. http://dx.doi.org/10.31399/asm.cp.itsc2021p0107.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

Abstract Cold Spray (CS) has gained special interest as a coating method due to the production of low oxide content deposits and solid-state deposition of powder material. This paper investigates the interaction between an electromagnetic field and cold-sprayed coatings produced using an induction heating cold spray (IHCS) system. It also investigates the role of the initial substrate surface temperature. The soft/hard material combination was used for depositing pure aluminum on Ti64 substrates. To assess the performance of the IHCS technique, deposition efficiency and adhesion and tensile strengths were used to characterize the hybrid technique. The results were compared to the traditional CS process. It was observed that the IHCS tensile samples exhibited almost three times the average elongation at break obtained by the traditional CS process. Intra-particle surface fracture was found in the samples produced by the hybrid process.

6

Li, Ji, Yang Wang, Gengzhao Xiang, Handa Liu e Jiangling He. "3D Mechatronic Structures via Hybrid Additive Manufacturing Technology". In 2018 IEEE 4th Information Technology and Mechatronics Engineering Conference (ITOEC). IEEE, 2018. http://dx.doi.org/10.1109/itoec.2018.8740386.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Vatani, Morteza, Erik D. Engeberg e Jae-Won Choi. "Hybrid Additive Manufacturing of 3D Compliant Tactile Sensors". In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-63064.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Abstract (sommario):

A resistance based conformal, compliant multi-layer tactile sensor was designed and built layer by layer using a hybrid manufacturing process. A highly stretchable, photocurable, piezoresistive sensing material was deposited on a conformal, soft molded structure using a direct printing device. The principle of the sensor is based on detecting the changes in resistance as it is deformed. The fabricated tactile sensor consists of two layers of sensing elements within the 3D skin structure where the sensing elements in the top layer are orthogonally placed atop the bottom layer. Due to the multiple layers of wires, the sensor can potentially detect various external forces/motions in two and/or three dimensions. Piezoresistivity and conductivity was introduced into the nonconductive stretchable prepolymer through dispersion of multi-walled carbon nanotubes (MWNTs). Experiments were performed to characterize the ability of the sensor to detect the location that forces were applied to the surface. Finally, it is expected that the developed conformal tactile sensor using the hybrid manufacturing method and materials could be used for various robotics and electronics applications.

8

Zhang, Tao, Mahder Tewolde, Jon P. Longtin e David J. Hwang. "Laser assisted hybrid additive manufacturing of thermoelectric modules". In SPIE LASE, a cura di Beat Neuenschwander, Costas P. Grigoropoulos, Tetsuya Makimura e Gediminas Račiukaitis. SPIE, 2017. http://dx.doi.org/10.1117/12.2251263.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Zhu, Zicheng, Vimal Dhokia, Stephen T. Newman e Chee Kai Chua. "Application of a Hybrid Process for Precision Manufacture of Complex Components". In 1st International Conference on Progress in Additive Manufacturing. Singapore: Research Publishing Services, 2014. http://dx.doi.org/10.3850/978-981-09-0446-3_020.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Hongyi, Yang, Nai Mui Ling Sharon, Qi Xiaoying e Wei Jun. "Preliminary Study on Nano Particle/Photopolymer Hybrid for 3D Inkjet Printing". In 1st International Conference on Progress in Additive Manufacturing. Singapore: Research Publishing Services, 2014. http://dx.doi.org/10.3850/978-981-09-0446-3_085.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Hybrid additive manufacturing":

1

Dehoff, Ryan R., Thomas R. Watkins, Frederick Alyious List, III, Keith Carver e Roger England. Low Cost Injection Mold Creation via Hybrid Additive and Conventional Manufacturing. Office of Scientific and Technical Information (OSTI), dicembre 2015. http://dx.doi.org/10.2172/1237611.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri