Bibliografie tematiche / Fiber Fabry-Perot resonators

Indice

  1. Articoli di riviste
  2. Tesi
  3. Capitoli di libri
  4. Atti di convegni

Letteratura scientifica selezionata sul tema "Fiber Fabry-Perot resonators"

Autore: Grafiati
Pubblicato: 1 marzo 2025

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Fiber Fabry-Perot resonators".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Fiber Fabry-Perot resonators"

1

Marcuse, D., e J. Stone. "Fiber-coupled short Fabry-Perot resonators". Journal of Lightwave Technology 7, n. 5 (maggio 1989): 869–76. http://dx.doi.org/10.1109/50.19128.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Maystre, F., e R. Dändliker. "Optical fiber transducers using Fabry-Perot resonators". Sensors and Actuators A: Physical 23, n. 1-3 (aprile 1990): 1097–101. http://dx.doi.org/10.1016/0924-4247(90)87095-z.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Zhang, Shao Jun, Yue Ming Liu e Xiao Hong Huangfu. "Mechanism and Simulation of Bi-Layered Micro Optical Fiber Resonator". Applied Mechanics and Materials 241-244 (dicembre 2012): 841–46. http://dx.doi.org/10.4028/www.scientific.net/amm.241-244.841.

Testo completo
Abstract (sommario):
Micro-resonators could be fabricated directly on the optical fiber top by micro mechanical process. The micro optical fiber resonator has more great advantages comparing with the traditional optical excited micro silicon resonators, such as being optically positioned easily between the resonator and the optical fiber end. By this way, the optical excited light through the fiber core is thus put on the micro resonator accurately and then partially reflected by the Fabry-Perot interferometer formed between fiber top and resonator surface. The reflected light from F-P interferometer was sent to the opto-electric detector PIN to demodulate the detected parameter. A matched metal layer can be deposited atop of the resonator in order to increase the optical excitation efficiency. Firstly mechanism analysis of optical excited bi-layered resonator is given by fully considering Longitudinal thermal strain effect and Bi-coating effect, and then the typical theoretical models were setup including the resonating frequency and resonant amplitude, and temperature sensing feature was simulated by computer software. The simulation results indicated that the average frequency sensitivity of temperature sensing is about 29Hz/°C.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Bunel, Thomas, Matteo Conforti, Julien Lumeau, Antonin Moreau, Arnaud Fernandez, Olivier Llopis, Julien Roul, Auro M. Perego e Arnaud Mussot. "Unexpected phase-locked Brillouin Kerr Frequency comb in fiber Fabry Perot resonators". EPJ Web of Conferences 287 (2023): 07005. http://dx.doi.org/10.1051/epjconf/202328707005.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Brierley, Michael, e Paul Urquhart. "Transversely coupled fiber Fabry-Perot resonators: performance characteristics". Applied Optics 26, n. 22 (15 novembre 1987): 4841. http://dx.doi.org/10.1364/ao.26.004841.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Ja, Y. H. "Optical vernier filter with fiber grating Fabry–Perot resonators". Applied Optics 34, n. 27 (20 settembre 1995): 6164. http://dx.doi.org/10.1364/ao.34.006164.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Wang, Shan-Shan, Zhi-Fang Hu, Yu-Hang Li e Li-Min Tong. "All-fiber Fabry–Perot resonators based on microfiber Sagnac loop mirrors". Optics Letters 34, n. 3 (23 gennaio 2009): 253. http://dx.doi.org/10.1364/ol.34.000253.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Park, Chang, Gyeong Kim, Suck Hong, Hwi Lee e Chang-Seok Kim. "Quasi-Distributed Active-Mode-Locking Laser Interrogation with Multiple Partially Reflecting Segment Sensors". Sensors 18, n. 12 (25 novembre 2018): 4128. http://dx.doi.org/10.3390/s18124128.

Testo completo
Abstract (sommario):
A new type of quasi-distributed sensor system is implemented using an active mode locking (AML) laser cavity with multiple partially reflecting segments. The mode locking frequency of the AML laser is linearly proportional to the overall lasing cavity length. To implement multiple resonators having multiple reflection points installed in a sensing fiber, two types of partial reflectors (PRs) are implemented for an in-line configuration, one with fiber Bragg grating and the other with a fiber Fabry–Perot interferometer. Since the laser has oscillated only when the modulation frequencies for the mode locking frequency match with the corresponding resonator lengths, it is possible to read the multiple partially reflecting segments along the sensing fiber. The difference between two corresponding mode locking frequencies is changing proportionally with the segment length variation between two PRs upon strain application. The segment length change caused by the applied strain can be successfully measured with a linear sensitivity between mode locking frequency and displacement, linearity over 0.99, and spatial position resolution below meter order.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Hoque, Nabil Md Rakinul, e Lingze Duan. "Ultrahigh-Resolution Fiber-Optic Sensing Based on High-Finesse, Meter-Long Fiber Fabry-Perot Resonators". IEEE Photonics Journal 12, n. 3 (giugno 2020): 1–9. http://dx.doi.org/10.1109/jphot.2020.2974628.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Li, Minxuan, e Ruohui Wang. "Fiber Fabry-Perot Interferometer-Based Fano Resonance Coupler for Whispering-Gallery-Mode Resonators". IEEE Photonics Technology Letters 33, n. 11 (1 giugno 2021): 585–88. http://dx.doi.org/10.1109/lpt.2021.3076999.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "Fiber Fabry-Perot resonators"

1

Bunel, Thomas. "Optical frequency comb generation in fiber Fabry-Perot resonators". Electronic Thesis or Diss., Université de Lille (2022-....), 2024. http://www.theses.fr/2024ULILR057.

Testo completo
Abstract (sommario):
Cette thèse explore les techniques de génération de peignes de fréquences optiques à partir de résonateurs Fabry-Perot fibrées. Les peignes de fréquences optiques, constitués de raies discrètes et équidistantes dans le domaine fréquentiel, correspondent à un train d'impulsions stable dans le domaine temporel. Ces peignes ont révolutionné la métrologie de pointe et ont permis le développement d'horloges optiques ultra-précises, mais leur génération reste un défi. Dans les années 2010, une méthode a émergé consitant à envoyer des lasers continus dans des cavités passives et à exploiter leurs propriétés non-linéaires pour générer les impulsions optiques nécessaires. Jusqu'ici, les microrésonateurs et résonateurs fibrés en anneau étaient privilégiés. Ici, nous étudions un nouveau type de cavité passive, les cavités Fabry-Perot fibrées, composée d'une fibre optique entre deux miroirs. Ces dispositifs, à la croisée des microrésonateurs et cavités en anneau fibrées, sont compacts et facilement intégrables dans les systèmes optiques grâce aux connecteurs FC/PC standard. L'étude de leurs dynamiques non-linéaires, en fonction de la dispersion chromatique, a permis de générer des peignes s'étendant sur 30 THz, avec plus de 48 000 raies et un bruit de phase inférieur à -110 dBc/Hz à 1 kHz. De plus, les technologies de télécommunication fibrée permettent le multiplexage spatial de la lumière, ouvrant la voie à des sources multi-peignes et à des applications avancées pour la spectroscopie et l'imagerie
This thesis investigates techniques for generating optical frequency combs using fiber Fabry-Perot resonators. Optical frequency combs, composed of discrete, equally spaced lines in the frequency domain, correspond to a stable pulse train in the time domain. These combs have revolutionized advanced metrology and enabled ultra-precise optical clocks, but generating these signals remains challenging. In the 2010s, a method emerged using continuous-wave lasers to pump passive cavities, leveraging their nonlinear properties to generate the pulses required for combs. Microresonators and fiber ring resonators have been predominantly used. Here, we explore a new type of passive cavity, a fiber Fabry-Perot cavity, made of an optical fiber between two mirrors. These devices, at the intersection of microresonators and fiber ring cavities, are compact and easily integrable into optical systems using standard FC/PC connectors. The study of their nonlinear dynamics as a function of chromatic dispersion, allow the generation of broad and stable combs spanning over 30 THz, with more than 48,000 lines and phase noise below -110 dBc/Hz at 1 kHz. Additionally, fiber-optic telecom technologies enable spatial multiplexing of light, opening the door to multi-comb sources and advanced spectroscopy and imaging applications
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Sixt, Pierre. "Étude et réalisation de capteurs à fibre optique en configuration Fabry-Pérot". Grenoble INPG, 1989. http://www.theses.fr/1989INPG0064.

Testo completo
Abstract (sommario):
La première partie de ce travail concerne l'étude et la réalisation de microstructures sur verre de type fabry-perot, en extrêmité de fibre optique. Nous rappelons tout d'abord le fonctionnement théorique des cavités, et les différents facteurs pouvant affecter les performances d'un résonateur de bas ordre, et nous décrivons le système de référençage spectral choisi ; nous présentons ensuite les résultats obtenus avec différentes méthodes d'assemblage des cavités: fixation organique, thermocompression, anodic bonding, cette dernière methode ayant donné le plus de succès. Dans une seconde partie, nous nous intéressons à des cavités fabry-perot radiofréquence, utilisant une modulation en bande de base de la porteuse optique ; deux formalismes de calcul de ces cavités sont décrits, leur utilisation pour la mesure de déphasages optiques est abordée, enfin nous présentons les résultats expérimentaux obtenus sur le référençage de capteurs de distance et de pression en extrêmité de fibre
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Stibůrek, Miroslav. "Miniaturní optovláknový senzor teploty pro magnetickou rezonanci". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-401006.

Testo completo
Abstract (sommario):
The following work deals with basics of fiber optics, history of fiber optics, and methods of measuring physical quantities with the use of fiber optic sensors. The work includes facts about physics, chemistry and biology - these elements are necessary for a full understanding of the issue. In order to create an optical fiber temperature sensor based on Fabry Perot resonator principle, several methods of manufacturing the optical cavity are investigated. A practical part of paper consist in the manufacturing of the miniature fiber thermometer, its coating and testing.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Covey, John Luther. "Ultrafast all-optical switching via grating-based fabry-perot resonators and surface normal fiber-to-waveguide couplers". Thesis, 2014. http://hdl.handle.net/2152/28046.

Testo completo
Abstract (sommario):
Electronic microchips have now firmly plateaued in switching speed. A promising solution for increasing performance on unparallelizable tasks is to switch digital data purely in the optical domain on a photonic chip, as all-optical switching can reach up to terahertz speeds and beyond. Because ultrafast optical effects are weak phenomena, materials with extremely high nonlinear sensitivity must be developed, and very high optical intensities and coupling efficiencies are required to adequately switch data streams of light. In this thesis, unique all-optical platforms, waveguides, fiber-waveguide grating couplers, and an ultrafast optical switch were experimentally demonstrated as proofs-of-concept for the validity of densely integrated all-optical switches. Two horizontal slot waveguiding structures were designed and fabricated from scratch: a multiple horizontal slot waveguide with polycrystalline silicon sandwiching third-order nonlinear slots and a nonlinear cover-cladding with slot-like behavior over a thin crystalline silicon waveguide. Perfectly vertical grating couplers were then designed from a novel genetic algorithm, fabricated, and experimentally tested for both platforms with two promising nonlinear materials: silicon nanocrystals or a supra-molecular assembly, DDMEBT. Vertical grating couplers in the multiple horizontal slot waveguide achieved a theoretical coupling efficiency of 63% and an experimental coupling efficiency of 60%, which is the highest coupling efficiency into nonlinear slot waveguides to date. Vertical grating couplers for the cover-slot waveguide experimentally demonstrated a coupling efficiency of 38% and an extrapolated 1 dB bandwidth of 66 nm, the largest grating-coupled 1 dB bandwidth obtained for slot waveguides to date. A grating coupler was then designed to be included as one of two grating reflectors in a nonlinear resonator switch. Coupled mode theory and vectorial eigenmode propagation simulations were used to optimally design the grating coupler/resonator device, resulting in a record low footprint of 710 μm² per combined switch and fiber coupler device. The third-order nonlinear molecular material, DDMEBT, was, for the first time, successfully spun onto pre-patterned silicon-on-insulator chips with repeatable, defect-free results. Extremely sensitive experimental autocorrelation of the resonator's impulse response yielded output pulse durations as low as 600 femtoseconds. At high power and low pulse repetition rates, the switch's resonances redshifted by 4 nm with 4 dB of switching contrast, revealing an ultrafast Kerr effect which matched previous works. The resonator switch is therefore capable of modulating a single optical carrier frequency at 1 THz and switching an optical data stream at 500 GHz. These are the fastest switching speeds demonstrated by an integrated all-optical switch and validate the proof-of-concept needed for a future of densely integrated all-optical processing.
text
Gli stili APA, Harvard, Vancouver, ISO e altri
5

LIOU, FANG-KUEI, e 劉芳魁. "Both Voltage Sensor and Liquid-Level Sensor Based on a Fabry-Perot Fiber Bragg Grating Resonator". Thesis, 2019. http://ndltd.ncl.edu.tw/handle/h39hba.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Capitoli di libri sul tema "Fiber Fabry-Perot resonators"

1

Maystre, F., e A. Bertholds. "Magneto-optic Current Sensor Using a Helical Fiber Fabry-Perot Resonator". In Springer Proceedings in Physics, 267–72. Berlin, Heidelberg: Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-75088-5_41.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Solymar, Laszlo, Donald Walsh e Richard Syms. "Lasers". In Electrical Properties of Materials, 11th Edition, 370–422. 11a ed. Oxford University PressOxford, 2024. http://dx.doi.org/10.1093/9780198921004.003.0012.

Testo completo
Abstract (sommario):
Abstract Begins by discussing the fundamentals of absorption and amplification in two-state optical systems, including energy levels, Planck’s radiation law, the Einstein A and B coefficients, the Lorentzian lineshape function, population inversion, amplification, optical resonators, and the conditions for oscillation and lasing. Introduces the main laser types, including solid state, gas discharge, dye, gas-dynamic, excimer, chemical, fibre, and semiconductor lasers. Details the main variants of semiconductor lasers, including the Fabry-Perot and distributed Bragg reflector lasers, lasers based on quantum wells, wires, dots and more general bandgap engineering, the laser array, and vertical cavity surface emitting lasers (VCSELs). Introduces the idea of transverse and axial modes, and presents a number of methods for their control, including Q-switching, cavity dumping and mode locking. Covers a number of related topics including parametric oscillators, optical fibre amplifiers, masers, and noise. Concludes with a discussion of applications, including optical sensors, optical communications, holography and Raman scattering.
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Fiber Fabry-Perot resonators"

1

Ousaid, Safia Mohand, Germain Bourcier, Arnaud Fernandez, Olivier Llopis, Julien Lumeau, Antonin Moreau, Thomas Bunel et al. "High Spectral Purity Lasers Stabilized on Mini Fabry-Perot Fiber Resonators". In 2024 European Frequency and Time Forum (EFTF), 351–53. IEEE, 2024. http://dx.doi.org/10.1109/eftf61992.2024.10722751.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Bunel, T., M. Conforti, Z. Ziani, J. Lumeau, A. Moreau, A. Fernandez, O. Llopis, G. Bourcier e A. Mussot. "Unexpected phase-locked Brillouin Kerr Frequency comb in fiber Fabry-Perot resonators". In CLEO: Science and Innovations, SF1Q.3. Washington, D.C.: Optica Publishing Group, 2024. http://dx.doi.org/10.1364/cleo_si.2024.sf1q.3.

Testo completo
Abstract (sommario):
We report the observation of a stable and broadband optical frequency comb in a high-Q fiber Fabry-Perot resonator operating in normal dispersion regime through a continuous wave pumping scheme. We evidence that it arises from an unexpected phase-locking phenomenon induced by a combination of the Kerr and Brillouin effects. This led to the generation of frequency combs, spanning over 10 THz, characterized by a 10.53 GHz line-to-line spacing within a cavity featuring a 1.176 GHz free spectral range.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Bunel, T., M. Conforti, Z. Ziani, J. Lumeau, A. Moreau, A. Fernandez, O. Llopis, G. Bourcier e A. Mussot. "Kerr frequency comb generation in normal dispersion fiber Fabry-Pérot resonators via switching waves excitation". In CLEO: Science and Innovations, SF1Q.5. Washington, D.C.: Optica Publishing Group, 2024. http://dx.doi.org/10.1364/cleo_si.2024.sf1q.5.

Testo completo
Abstract (sommario):
We report the generation of optical frequency combs in fiber Fabry-Perot resonator operating in the normal dispersion regime. Thanks to the compact design and the easy coupling of the resonator, switching waves can be generated in an all-fiber experimental setup employing a pulsed pumping scheme. The influence of dispersion is thoroughly discussed, revealing the potential to create a frequency comb spanning a 15 THz bandwidth through the utilization of a flattened low dispersion cavity. The experimental results are in good agreement with the theory and the numerical simulations.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Xu, Yiqing, Matthew Macnaughtan, Zongda Li, Xiaoming Wei, Zhongmin Yang, Stéphane Coen, Miro Erkintalo e Stuart G. Murdoch. "Frequency-offset Kerr soliton comb generation in a dispersion-shifted fiber Fabry-Perot resonator". In Nonlinear Photonics, NpTh1E.4. Washington, D.C.: Optica Publishing Group, 2024. http://dx.doi.org/10.1364/np.2024.npth1e.4.

Testo completo
Abstract (sommario):
We present a study of frequency-offset soliton combs that arise when a Kerr resonator is driven by a desynchronized pulsed field. We experimentally observe these offset-combs in a Fabry-Perot resonator constructed from dispersion-shifted optical fiber.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Shu, Xuewen, e Fangcheng Shen. "Optical load sensors utilizing fiber-Bragg-grating based Fabry-Perot resonators". In Fiber-Based Technologies and Applications. Washington, D.C.: OSA, 2014. http://dx.doi.org/10.1364/fbta.2014.fth4d.5.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Savchenkov, Anatoliy, Wei Zhang, Vladimir Iltchenko e Andrey Matsko. "Environmentally Stable Ultra-Low Noise Self-Injection Locked Semiconductor Lasers". In Optical Fiber Communication Conference. Washington, D.C.: Optica Publishing Group, 2024. http://dx.doi.org/10.1364/ofc.2024.w3d.1.

Testo completo
Abstract (sommario):
Self-injection locking (SIL) of semiconductor lasers by means of monolithic optical cavities allow generation of high spectral purity and high stability optical signals under varying environmental conditions. We review recent advances in the field and focus at the SIL by means of monolithic Fabry-Perot resonators.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Johlen, Dietmar, Peter Klose, Andreas Ewald e Ernst Brinkmeyer. "Non-reflecting narrow-band fiber optical Fabry-Perot transmission filter". In Bragg Gratings, Photosensitivity, and Poling in Glass Fibers and Waveguides. Washington, D.C.: Optica Publishing Group, 1997. http://dx.doi.org/10.1364/bgppf.1997.bsuc.5.

Testo completo
Abstract (sommario):
Tilted Bragg gratings have been used for intermodal conversion in dual-mode fibers [1]. In this paper we demonstrate that such gratings in combined single-mode/dual mode structures are attractive for optical filter design. In particular, this concept is used here to realize narrowband Fabry-Perot transmission filters which - unlike ordinary FP-resonators - do not reflect the incident light at either side of the transmission peak.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Shu, Xuewen, Kate Sugden e Ian Bennion. "Optical load sensors utilizing fiber-Bragg-grating based Fabry-Perot resonators". In 20th International Conference on Optical Fibre Sensors, a cura di Julian D. C. Jones. SPIE, 2009. http://dx.doi.org/10.1117/12.834251.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Sun, Xiaomeng, Linjie Zhou, Jingya Xie, Zhi Zou, Liangjun Lu, Xinwan Li e Jianping Chen. "Tunable Silicon Comb Filters Based on Fabry-Perot Resonators Formed by Sagnac Loop Mirrors". In Optical Fiber Communication Conference. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/ofc.2013.oth4i.6.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Bunel, Thomas, Matteo Conforti, Julien Lumeau, Antonin Moreau, Arnaud Fernandez, Olivier Llopis, Julien Roul, Auro M. Perego e Arnaud Mussot. "Unexpected Phase-Locked Brillouin Kerr Frequency Comb in Fiber Fabry Perot Resonators". In 2023 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC). IEEE, 2023. http://dx.doi.org/10.1109/cleo/europe-eqec57999.2023.10232760.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Ti possono interessare anche gli elenchi estesi di opere sul tema "Fiber Fabry-Perot resonators":
Articoli di riviste
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia