Tesi sul tema "Fabrikker"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-49 saggi (tesi di laurea o di dottorato) per l'attività di ricerca sul tema "Fabrikker".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi le tesi di molte aree scientifiche e compila una bibliografia corretta.
Hallgren, Erika. "Uppföljande lavinventering runt Domsjö Fabriker". Thesis, Umeå universitet, Institutionen för ekologi, miljö och geovetenskap, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-176959.
Testo completoAdam, Lindahl, e Ellinor Rosenbaum. "Den smarta fabriken". Thesis, Malmö universitet, Fakulteten för teknik och samhälle (TS), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-20131.
Testo completoIn the fluctuating wave of digitization, the fourth industrial revolution or Industry 4.0 in the manufacturing industry, has begun that has accelerated industries and companies to adapt and change their whole business to maintain competitive. Industrial Internet of Things (IIoT) has become a central part of this change for manufacturing companies and can be interpreted as companies taking advantage of units to gather real-time data and in turn, lean towards the smart factory. A range of possibilities can be accessed by industries with the rise of IIoT, though the success of this change can differ between different companies depending on size, resources, and economic stability. Parallel to the opportunities, challenges arises for companies, especially small and middle-sized enterprises, that lack the economic resources and scale to redistribute and transform their business. In this paper, the goal has been to distinguish how middle-sized manufacturing companies handle the implementation of IIoT and the smart factory in order to adapt to the ever-changing technical paradigm that Industry 4.0 has introduced. Conclusions have been drawn from the combination of a theoretical framework and interviews with six Swedish middle-sized manufacturing companies. The digitization strategy for manufacturing companies varies from industries. However, there is a consensus that efforts towards a digitized production must take place in order to stay competitive where automation-, monitoring-, and controlling processes within IIoT are main factors to stay competitive. The pace and level of implementation can also differ depending on digital qualification and resistance to change from the staff. Important to note is that the relation between IIoT, digitization and increased competitiveness is not the only factors that are significant as there are more things to consider. The study also shows that competitive advantages are rarely the main reason why companies choose to digitize and implement IIoT.
Janossy, Orsolya, e Sara Holmström. "Investeringar i klädproducerande fabriker i Södra Indien". Thesis, Högskolan i Borås, Institutionen Textilhögskolan, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-19613.
Testo completoProgram: Textilekonomutbildningen
Lindgren, Anna. "Energikartläggning av blekeriet på Domsjö Fabriker AB". Thesis, Umeå universitet, Institutionen för tillämpad fysik och elektronik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-122036.
Testo completoStengler, Matthias. "Bestandskonforme Weiternutzung von Fabriken". Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2012. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-84517.
Testo completoNilsson, Amanda, e Hanna Lindqvist. "Framtidens produktionspersonal i den Smarta fabriken". Thesis, Högskolan i Skövde, Institutionen för ingenjörsvetenskap, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-12025.
Testo completoIsteifo, Gabriel. "Livet i Fabriken : Två montörers berättelser". Thesis, Södertörns högskola, Socialt arbete, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-44609.
Testo completoBern, Madeleine, e Emelie Nyström. "Förbättras fabriksanställdas arbetstiderav implementerandet av västerländskauppförandekoder i kinesiska fabriker? : En fallstudie". Thesis, KTH, Industriell produktion, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-102428.
Testo completoDoes the implementation of Western Codes of Conduct in Chinese factories, decrease the employees’ excess working hours? A code of conduct is a set of guidelines that a company or an organization set up in order to ensure that their operations are conducted in an ethically, socially and / or environmentally exemplary manner. Many businesses are adopting global Codes of Conduct to implement CSR (Corporate Social Responsibility)-work in the own organization. For the work to be credible, these Codes of Conduct must also be implemented in the supply and distribution chains. When companies seek lower production costs and turn to subcontractors in lowwage countries, difficulties may arise with this implementation. These difficulties are mainly a consequence of the companies being separated geographically, which in turn leads to business cultural, social, political, economic and legal differences. Nevertheless, these CSR activities should improve the working conditions for employees in low-wage countries, such as China. The purpose of this thesis is to investigate if the implementation of Western Codes of Conduct in Chinese factories has an effect on employees´ working hours. The thesis includes a study of existing theory and an empirical investigation. The theory covers Codes of Conduct, methods for implementing them in Asian supply chains, and the difficulties with this process. Empirical data were collected through a qualitative case study of a business deal. The transaction is between a German chain of “Do-it-Yourself”-stores and a Swedish supplier with production China. A common method for implementing Codes of Conduct in a supply chain is to establish written requirements for the subcontractor and verify compliance with these requirements. Internal and external factory audits are accepted tools for this verification. In the studied case the German company uses an external firm to verify that the Chinese factory meets the conditions of a global code of conduct. The empirical study confirms the difficulties described in the theory, businesscultural differences makes the system inadequate in short term.
Brandner, Stefan. "Integriertes Produktdaten- und Prozessmanagement in virtuellen Fabriken /". München : Utz, 2000. http://aleph.unisg.ch/hsgscan/hm00015379.pdf.
Testo completoEngelmann, Jörg. "Methoden und Werkzeuge zur Gestaltung energieeffizienter Fabriken /". Chemnitz : Techn. Univ., Inst. für Betriebswiss. und Fabriksysteme, 2009. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=017155665&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Testo completoHansson, Pontus, e Christoffer Tell. "Plastals konkurs : ur fabriken i Simrishamns perspektiv". Thesis, Kristianstad University College, School of Health and Society, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hkr:diva-6613.
Testo completoFinanskrisen som utbröt i slutet av sommaren år 2008 har orsakat kris för många företag. Bilindustrin som redan hade en överkapacitet drabbades hårt då nybilsförsäljningen sjönk drastiskt. Plastalkoncernen som var en stor underleverantörerna till den europeiska bilindustrin blev försatta i konkurs den 5 mars år 2009.
Syftet med uppsatsen var att förstå vad som händer i ett tillverkningsföretag som går i konkurs och som sedan nybildas. Uppsatsen är skriven ur Plastals fabrik i Simrishamn perspektiv. Undersökningen har genomförts på plats på Plastals fabrik i Simrishamn där både operativ och ledande personal har intervjuats.
Slutsatsen av den här uppsatsen är att en konkurs berör alla företagets intressenter. Ofta behandlas bara personal och de som har fodringar hos det kursade företaget. Hos fabriken vi undersökte var det framförallt kundernas beroende av fabrikens produktion som omöjliggjorde en nedläggning till följd av konkursen. Anställningstryggheten i Sverige gjorde besparingarna till följd av varsel mycket långsammare än orderminskningen. Vid nybildningen gjorde turordningsreglerna för återanställning att det blev en skev åldersfördelning som kan vara till nackdel för fabriken i framtiden. Utan anställningstrygghet kan effekten bli ökad effektivitet och minskad sjukfrånvaro.
Hesselgren, Eva. "Vi äro tusenden : arbets- och levnadsförhållanden inom svensk textilindustri med särskilt avseende på Gamlestadens fabrikers AB 1890-1935". Doctoral thesis, Stockholms universitet, Ekonomisk-historiska institutionen, 1992. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-78464.
Testo completoGöransson, Anita. "Från familj till fabrik : teknik, arbetsdelning och skiktning i svenska fabriker 1830-1877 /". Lund : Arkiv förl, 1988. http://catalogue.bnf.fr/ark:/12148/cb39151603r.
Testo completoLundgren, Marcus, e Nilsson Tobias. "Produktkalkylering i mindre hantverksföretag : En fallstudie på Gemla Fabrikers AB". Thesis, Linnéuniversitetet, Institutionen för ekonomistyrning och logistik (ELO), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-53356.
Testo completoKurs: Examensarbete i logistik för Civilekonomprogrammet, 4FE19E, VT16 Författare: Marcus Lundgren och Tobias Nilsson Handledare: Peter Berling Examinator: Helena Forslund Titel: Produktkalkylering i mindre hantverksföretag – En fallstudie på Gemla Fabrikers AB Bakgrund: Ett konkurrenskraftigt pris är i dagsläget inte tillräckligt då även en noggrann kostnadskontroll som tar hänsyn till arbetskraftsinsatsen och produktrelaterade avvägningar krävs för att säkerställa konkurrensförmågan. Ett användbart verktyg för detta är upprättandet av produktkalkyler som grund för lönsamhetsanalyser, prissättningsstrategi och beslutsunderlag. Svårigheten ligger dock i att finna rätt kalkyleringsmetod gällande detaljeringsnivån som fördelar en verksamhets direkta och indirekta kostnader på ett rättvisande sätt. Syfte: Syftet med studien är att genom en kartläggning av tillverkningsprocessen anpassa en produktkalkyl för prissättning och beslutsfattande av produktsortimentet på Gemla Fabrikers AB, samt teoretiskt lyfta diskussionen om anpassad modells lämplighet i en kontext för mindre tillverkande företag som karaktäriseras av en hantverksmässig produktion. Metod: Studien utförs enligt en fallstudie på Gemla Fabrikers AB med en flerfaldig forskningsstrategi av kvalitativ art med kvantitativa inslag. Datainsamlingen bygger främst på ostrukturerade intervjuer, direkta observationer och tidsstudier. En processkartläggning genomfördes till en början för att utgöra ett underlag för resterande delar. Vidare anpassades en produktkalkyl utifrån företaget och tillverkningens karaktär vilket slutligen utgjorde ett underlag för modellens lämplighet i en hantverksmässig tillverkningskontext. Slutsatser: Efter genomförd kartläggning av tillverkningsprocessen på fallföretaget framgick det att tillverkningen karaktäriseras av en tidskrävande process med ett stort antal ingående aktiviteter. Detta resulterade i att anpassad produktkalkyl utformades enligt en ABC-modell då slutsatsen blev att fördelningen av kostnaderna skulle göras iii mer rättvisande om dessa fördelades till respektive aktivitet baserat på det faktiska tidsutnyttjandet. Anpassad modell utformades genom en tydlig aktivitetsfördelning utifrån produktnivå där varje aktivitets kostnad fastställs vid en given produktionsvolym vilket möjliggör underlag för en ökad kostnadskontroll, prissättningsstrategi och beslutsunderlag. Baserat på studerat fallföretag drogs slutsatsen att anpassad modell görs lämplig för andra företag i en liknande hantverksmässig kontext utifrån att i högre grad göra sammanslagningar av aktiviteter med ett större fokus på de värdeadderande aktiviteterna. Kostnadsfördelningen sker via ett orsak-verkan samband utifrån det faktiska tidsutnyttjandet där ett mindre antal tidsrelaterade kostnadsdrivare används. Modellen blir då lämplig för ökad kostnadskontroll samt underlag för prissättning och beslutsfattande.
Stoldt, Johannes. "Gestaltungsmethodik für Simulationsstudien in Umplanungsprojekten zur Energieeffizienzsteigerung in Fabriken". Universitätsverlag Chemnitz, 2018. https://monarch.qucosa.de/id/qucosa%3A34357.
Testo completoEffective and efficient planning of energy efficiency measures is of great importance to manufacturing companies. Material flow simulation that has been extended to also include energy is increasingly used in this context as a tool for the analysis of complex interactions between material flows and energy flows in factories. This thesis deals with the conception and the systemization of a methodology for designing such simulation studies specifically in re-planning projects that aim for energy efficiency improvements. Taking basic approaches from decision theory into particular consideration, it is intended to provide guidance in deciding on the project-specific manifestation for relevant characteristics of a simulation study in this problem area (e.g. the manner to model energy consumption), regardless of the utilised simulation solution. The developed solution comprises a 13 steps spanning process model as well as nine solution modules to support decisions concerning the choice of manifestation for selected characteristics. In this way, the entire process from the development of an energy efficiency measure through the actual application of simulation (following VDI guideline 3633 Part 1:2014) to the eventual investment decision is assisted. The results of this thesis were exemplarily tested in three case studies. All initially defined requirements could thereby be positively verified.
Åström, Mikaela. "En simulering av materialförsörjningen mellan två processer i fabriken". Thesis, Umeå universitet, Institutionen för matematik och matematisk statistik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-172321.
Testo completoRosenbaum, Ellinor, e Adam Lindahl. "Den smarta fabriken - Svenska medelstora tillverkningsföretags tillämpning av IIoT". Thesis, Malmö universitet, Fakulteten för teknik och samhälle (TS), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-20654.
Testo completoIn the fluctuating wave of digitization, the fourth industrial revolution or Industry 4.0 in themanufacturing industry, has begun that has accelerated industries and companies to adapt andchange their whole business to maintain competitive. Industrial Internet of Things (IIoT) hasbecome a central part of this change for manufacturing companies and can be interpreted ascompanies taking advantage of units to gather real-time data and in turn, lean towards thesmart factory. A range of possibilities can be accessed by industries with the rise of IIoT,though the success of this change can differ between different companies depending on size,resources, and economic stability. Parallel to the opportunities, challenges arises forcompanies, especially small and middle-sized enterprises, that lack the economic resourcesand scale to redistribute and transform their business. In this paper, the goal has been todistinguish how middle-sized manufacturing companies handle the implementation of IIoT andthe smart factory in order to adapt to the ever-changing technical paradigm that Industry 4.0has introduced. Conclusions have been drawn from the combination of a theoretical frameworkand interviews with six Swedish middle-sized manufacturing companies. The digitizationstrategy for manufacturing companies varies from industries. However, there is a consensusthat efforts towards a digitized production must take place in order to stay competitive whereautomation-, monitoring-, and controlling processes within IIoT are main factors to staycompetitive. The pace and level of implementation can also differ depending on digitalqualification and resistance to change from the staff. Important to note is that the relationbetween IIoT, digitization and increased competitiveness is not the only factors that aresignificant as there are more things to consider. The study also shows that competitiveadvantages are rarely the main reason why companies choose to digitize and implement IIoT.
Ramsten, Oscar, e Tarek Jannusi. "En teoretisk studie kring smarta fabrikers inverkan på effektivitet och ekonomi". Thesis, KTH, Skolan för industriell teknik och management (ITM), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-279704.
Testo completoThe industrial revolution started in the early 1700s. The revolution was the starting point for all scientific progress and has a huge impact on how industrial production looks today. Today's active revolution is the fourth revolution, Industry 4.0 can be characterized by a number of new technologies that aim at streamline all production and manufacturing we have today. The implementation of these new technologies has resulted in different manufacturing companies being able to convert their factories into smart factories. In order for a factory to be defined as a Smart factory a few conditions need to be fulfilled such as mobile and wireless technology and humans in the center and to conduct a flexible production with sustainable manufacturing, as well as utilizing Internet-of-Things (IoT) and Cloud storage. This study began as a literature study in a form of a theory study on smart factories and how these can affect production from an economic perspective. With the help of the information obtained, a prestudy with specific focus could be made on various factors of smart factories carried out. Parallel with this, interviews with Bosch Rexroth and Siemens were conducted. Results of the interviews show that the implementation of the various smart factories is a process that is constantly evolving. The companies always strive to improve in different areas. What makes it attractive for large manufacturing companies is the factory's flexibility and their ability to organize and set the production flow on demand and what products to manufacture. Adjustable production lines have made it possible to handle changes during ongoing production much easier than before, which in turn has also shortened lead times. The factories are equipped with machines that can create a copy of a real environment and investigate whether a product can be manufactured. Characteristics of the smart factory are crucial when it comes to connectivity and autonomy. Factories have long relied on automation, but smart factories take this concept further and can be run with less impact of human factors. This means that some staff will be given new tasks and skills requirements will increase while the factories will be smarter. The economic perspective showed in the study that there are new value-creating processes and also new business models can be developed to offer the customer the best solutions. By investing in smart factories, manufacturing companies can provide better conditions for improvements in information technology and also improved performance. The companies will be able to produce more of the customer's specific products profitably in a smart factory.
Wolfram, Joakim, e Jonas Lundin. "Förbättringsmöjligheter inom prefabproduktion : En undersökning av BoKlok-fabriken i Gullringen". Thesis, Örebro universitet, Akademin för naturvetenskap och teknik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:oru:diva-16612.
Testo completoHansen, Nils. "Fabrikkinder : zur Kinderarbeit in schleswig-holsteinischen Fabriken im 19. Jahrhundert /". Neumünster : K. Wachholtz, 1987. http://catalogue.bnf.fr/ark:/12148/cb35707745v.
Testo completoMäkinen, Jonathan. "Den Temporära Fabriken och APO-entreprenad : Framtidens sätt att arbeta med arbetsplatsomkostnader?" Thesis, Uppsala universitet, Byggteknik och byggd miljö, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-414419.
Testo completoIn a multibillion project called Sergelhuset in the city center of Stockholm, a new way of handling general overhead costs and general tasks in building projects (APO), was developed. Instead of the construction companies doing it as usual, the purchaser chose to buy the service from a third party. It would amount to project organization, logistics, safety and temporary solutions. The report investigates how the construction business handles general costs and whether Ramirent’s new concept The Temporary Factory can help increase efficiency on the construction site. It also contains information that shows great needs in this area and the needs of continuous follow up and control. The report includes interviews with prominent project managers and other field experts. To reach a higher level of efficiency the purchaser, construction companies and APO-provider need to cooperate, share risks and aim for high value creation in new innovative projects.
Kuhlmann, Timm [Verfasser], e Alexander [Akademischer Betreuer] Sauer. "Methode zur Gestaltung der energetischen Wandlungsfähigkeit in Fabriken / Timm Kuhlmann ; Betreuer: Alexander Sauer". Stuttgart : Universitätsbibliothek der Universität Stuttgart, 2020. http://d-nb.info/121134441X/34.
Testo completoBredberg, Sofia. "Den stora produktionen i den lilla fabriken : En fallstudie om Leans påverkan på platsbrist". Thesis, Mälardalens högskola, Innovation och produktrealisering, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-42856.
Testo completoStengler, Matthias [Verfasser], Bernhard [Akademischer Betreuer] Weller e Dieter [Akademischer Betreuer] Fellmann. "Bestandskonforme Weiternutzung von Fabriken / Matthias Stengler. Gutachter: Bernhard Weller ; Dieter Fellmann. Betreuer: Bernhard Weller". Dresden : Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2012. http://d-nb.info/1068442557/34.
Testo completoSynnergren, Camilla. "Design som vårdar ett varumärke : Hur kan jag som möbeldesigner ta mig an uppgiften att designa för att vårda ett varumärke?" Thesis, Linköpings universitet, Malmstens Linköpings universitet, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-178351.
Testo completoDen här rapporten är en undersökning i hur jag som möbeldesigner kan ta mig an uppgiften att designa en möbel i avsikt att vårda ett varumärke. Under tre års studier på på Malmstens möbeldesignprogram har jag tränats för att kunna designa möbler för möbelindustrin. Rapporten beskriver hur en fåtölj vuxit fram ur en designprocess i samarbete med Gemla Fabrikers AB. Syftet var att skapa en produkt som vårdar Gemlas varumärke. Fokus har lagts på Gemlas historia som är det enda företag i Sverige som kan böja trä och de vägval Gemla står inför. Undersökningen bygger på egna studier, intervjuer och en enkät. Fåtöljen som är det fysiska resultatet av denna undersökning är delvis tillverkad i böjträ och är en hyllning till drottningen i den svenska möbelindustrin. Gemla.
Beckmann, Bastian [Verfasser]. "Methode zur optimierten Exergieverwendung in Fabriken des Maschinenbaus : Ein Beitrag zur Nutzung von Wärmenetzen / Bastian Beckmann". Aachen : Shaker, 2013. http://d-nb.info/1049383370/34.
Testo completoHesselgren, Eva. "Vi äro tusenden : arbets- och levnadsförhållanden inom svensk textilindustri med särskilt avseende på Gamlestadens Fabrikers AB 1890-1935 /". Stockholm : Almqvist & Wiksell, 1992. http://catalogue.bnf.fr/ark:/12148/cb37018562d.
Testo completoAgrell, Elias. "Analys av massapumps- och mixerarbete vid Metsä Board Sverige AB, Husums Fabriker : Energibesparingsåtgärder vid blekeri 4 & 5 med jämförelse mot ny utrustning". Thesis, Umeå universitet, Institutionen för tillämpad fysik och elektronik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-93626.
Testo completoMetsä Board Husum har idag ett flertal olika modeller av massapumpar vid blekeri 4 och 5. Dessa är av deplacerande typ (HC-pump, Sunds Defibrator PTD-60) samt centrifugalmodell (MC-pump, MCA 42-200, MCP 30/20), centrifugalmodellen regleras med strypventiler vilket innebär en extra förlust, speciellt märkbar är denna då produktionen tas ned. Vid blekeriet finns även kemikaliemixrar för att mixa in ClO2 innan pappersmassan pumpas till ett uppehållstorn där blekprocessen sker. Anläggningens nuläge genomgick en mindre kartläggning där specifikationer och mätdata samlades in för att ge en bakgrund till det energibehov som finns idag. Tillgänglighet för reservdelar har varit av intresse för de äldre HC-pumparna. Tillsammans med Sulzer har uppfordringshöjd beräknats för positioner utrustade med PTD -60 då uppgifter för denna saknades. Sulzer och Valmet har offererat ny utrustning för dessa positioner som jämförs mot uppmätta värden för att beräkna återbetalningstid. Inkomna offerter förutsätter frekvensomriktare och baseras på en önskad produktionsökning till 50 ADMt/h för blekeri 4 och 60 ADMt/h för blekeri 5. Detta är en ökning på 10 ADMt/h och blekeri. Erforderlig effekt för drifter i inkomna offerter och uppmätt effekt är ej angiven vid samma driftpunkt. De offererade pumparnas driftpunkt har därför räknats om för att motsvara driftpunkt vid tillfället för insamling av data. Detta för att enkelt kunna jämföra offerter mot nuläge. På blekeri 4 återfinns en MC-pump av modell MCA 42-200 med posnummer 441PU255. Vid denna position gjordes en djupare undersökning då nivåregleringen ej fungerar som tänkt. Nivåhållning sker via reglerventil och varvtalsreglering med frekvensomriktare. För att kunna köra driften har frekvensomriktaren manuellt ställts i ett fast varvtal och reglerventilen lagts i automatik. Ventilen styr därmed nivå i fallröret och har vid normal drift en öppningsgrad på 40-50 %. Vid genomgången upptäcktes att parametrar i styrsystem gällande de varvtal motorn skall arbeta vid inte korrigerats efter en ombyggnation. Detta har medfört att nivån inte gått att reglera i automatik utan att systemet börjat självsvänga. För att undersöka skillnad mellan varvtalsstyrning och strypreglering gjordes ett försök där varvtalet sänktes från 1520 rpm till 1100 rpm vilket resulterade i en effektminskning på 82 kW eller 342 081 kr per år jämfört med strypreglering; detta var vid en produktion av 36 ADMt/h. Försöket gjordes med något lägre produktion än önskvärt; på grund av detta kommer besparingen minska något vid högre produktion. Samtliga positioner uppvisar minskat energibehov med ny utrustning. Dock gör hög investeringskostnad och krav på kort återbetalningstid att endast några få positioner är lämpliga kandidater för ombyggnad i dagsläget. För MC-pumparna kan däremot majoriteten av besparingen uppnås genom att bygga om dagens strypreglering till varvtalsreglering. Detta sker till en betydligt lägre kostnad än vid uppgradering av pump. Arbetet visar att det finns stor potential att minska energikonsumtion vid blekning av pappersmassa, detta gäller speciellt för de befintliga MC-pumparna som är kraftigt överdimensionerade och regleras med strypventil. De gamla kemikaliemixrarna använder stora mängder energi för att mixa in ClO2, nya mixrar använder mindre än hälften av energin och ger överskådliga återbetalningstider.
Arlestrand, Oscar. "Energieffektivisering av kvalmgasåtervinning vid Barilla i Filipstad : Energikartläggning och åtgärdsförslag för en lägre energiförbrukning på Västra fabriken". Thesis, Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-36311.
Testo completoThe EU aims to have a 20% lower power consumption compared to the forecasted usage by 2020 (EU-upplysningen 2014). A company that strives to reduce its power consumption is Barilla in Filipstad who conducts a bakery industry where Wasa crisp bread is manufactured. The baking stage is usually where most energy is required for bakery industries and could account for 66% of the total energy usage (Therkelsen et. al in 2014). To reduce this energy usage, Barilla uses a heat recovery system which extracts some of the energy in the fume gases[1] which are sucked out of the ovens in the baking step. This is accomplished by showering the hot gases with a colder fluid in a scrubber, which then heats up and can be transferred by a heat exchanger to the local heating systems at the factory. The extracted energy replaces energy needs from the plant's electric boiler or oil furnaces. They call this process fume gas recycling and it provides a major part of the annual energy demand. If it was possible to obtain more energy from the fume gases before they leave the chimneys, a more sustainable production of bread be could be achieved due to the lower energy usage of both oil and electricity. The objective of this study was to investigate whether the fume gas recycling on two of the plant's production lines work can be more efficient from an energy and environmental point of view. The results of the study show that there are several measures that would allow the fume gas recycling to give more energy compared to the current configuration. This would mean lower operating costs for Barilla but also a reduction of fuel demands and carbon emissions seen from a broader energy perspective. By introducing a heat exchanger between the scrubber water at production line 18 and the local heating system VS6, operating cost would be reduced with 1488 kSEK/year. If account is taken to the amount of oil that Barilla doesn’t need to burn and if the released electricity that is no longer required is seen as electricity at the margin. A total of 3765 MWh fuel/year and 1261 tonnes CO2/year could be reduced with this measure. By using the present value method the lifetime cost was calculated to 18,27 MSEK. This means that investment costs should be less than this value in order to provide greater or equal revenue than expenditure. The study was done by conducting a survey of all energy and mass transport that the two fume gas recycling systems include. A dynamic model was created based on these balances by using SIMULINK software. The model was configured so that the calculated energy needs from electricity and oil furnaces was the same as the statistics on energy use from 2014. The capability to simulate the effects of introducing seven different individual actions and six combinations of these were also added to this model. The study illustrates that there are good investment opportunities in order to achieve a more sustainable production of bread. Sensitivity analyses that were implemented in the study show, however, that the validity of the results is affected by a majority of the evaluated data. Input data in the form of averages based on logged values and more information about the components used in the system are required to obtain results that are to be considered more precise than educated guesses. [1] Fume gases is a generic term for the water vapor that is driven out, the air that is used to carry the water vapour and the carbon dioxide produced during the baking process.
Persson, Josefine, e Emelie Samuelsson. "Analys av produktionskostnader för investering i ny utrustning vid ombyggnation av TA-fabriken på Volvo Cars Torslanda". Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-25644.
Testo completoToday's dynamic markets are characterized by characteristics such as change and development. This characterization thus places high demands on a company's ability to adapt to the prevailing market environment. When companies are faced with different decisions, in which direction the business should be directed, it is essential that a thorough decision basis is drawn up. The decision basis can consequently convey a picture of how different potential decision-making decisions can mean a change of direction for the company. The purpose of the work was in its entirety to investigate whether equipment used in current production should be reused for future flow or not. By analyzing which production costs each equipment burdens the company with, in relation to risk analysis of various investment opportunities, the company maintains a thorough decision basis. In order for the comparison between reuse and investment to convey and correct picture of reality based on data, aspects such as sustainable development, quality management, lean management and financial management have been taken into account. The work has been based on a quantitative study where data has been collected from specific databases and then processed and compiled into an analyzable result. The data collected is intended to reflect key points in production costs that have arisen in connection with the equipment examined. When producing analysis, it was shown that reuse can both lead to possible advantages but also disadvantages for the company. What is a major factor for necessary decisions that are attractive to the company, is goal management. An important aspect, which emerged during the work, was the significant extent to which a company's financial goal is permeated by strategy work with regard to quality and sustainability. Another conclusion, which emerged from the work, was that depending on whether the company wants to adopt a short-term or long-term perspective, the potential advantages and disadvantages are addressed. It is thus not only an analysis of production costs that shows whether it is economically justifiable to invest in new equipment, but also which aspects are prioritized for operations and their goal management.
Trkulja, Simo. "Norrköpings folkpark, 1893-1895 : En diskursanalys av den ideale besökaren". Thesis, Linköping University, Department of Social and Welfare Studies, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-6237.
Testo completoUndersökningens syfte är att utifrån en diskursteoretisk ansats beskriva och analysera bakgrunden till Norrköpings folkparks tillkomst samt folkparksstyrelsens uppfattning om den ideale besökaren under slutet av 1800-talet. Granskningen görs med utgångspunkt från frågorna: med vilka argument resonerade folkparkens styrelse att parken skulle byggas, vad kan man utifrån denna argumentation utläsa om folkparkens funktion och vem var den ideale besökaren enligt folkparksstyrelsen? De resultat som framkommit vid analysen bör ses som tolkningar gjorda utifrån Foucaults teorier om disciplinering och makt.
Folkparken var under slutet av 1800-talet en social arena för disciplinering av arbetare. Folkparkens utformning i kombination med tillkomsten av ordningsregler och övervakning kan i det här sammanhanget bl.a. ses som ett led i arbetet med att förändra besökarnas beteende. Borgerlighetens förhoppning var att genom disciplinering utifrån de fastställda reglerna för korrekt beteende skapa ordningsamma, flitiga och tidsmedvetna arbetare. Detta gjordes delvis i syfte att höja fabrikernas effektivitet och kvalitén på den tid som arbetaren sålde till företagen.
Borgerligheten sökte även förändra besökarnas relation till naturen och indirekt till nationen genom att skapa ideala förutsättningar för upplevelser och konsumtion av den genuint svenska naturen. Disciplineringen i folkparken skedde parallellt med indoktrineringen av det genuint svenska i andra sammanhang. I skolan förmedlades bilden av den svenska naturen via dikter, bilder, konst och sång och understödde upplevelserna i folkparken. Förhoppningen var att dessa erfarenheter skulle öka arbetarnas fosterlandskärlek och indirekt förbättra arbetarnas relation till nationen och borgerligheten.
Karlsson, Sofia. "Den psykiatriska fabriken : En litteratursociologisk analys av psykiatrin som en kapitalistiskt driven instans i Linda Boström Knausgårds Oktoberbarn". Thesis, Linnéuniversitetet, Institutionen för film och litteratur (IFL), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-100862.
Testo completoKyhlberg, Adam, e Magnus Isaksson. "Kvinnans plats på fabriken – underordnad mannen? : En studie av arbetsdelningen på Gotthards AB i Älmhult mellan åren 1917-1959". Thesis, Linnéuniversitetet, Institutionen för kulturvetenskaper (KV), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-38661.
Testo completoZetterman, Joachim. "Prediktiv simulation : En undersökning om möjligheten att minskaslöseri vid ett industriföretag med hjälp av digitala simuleringar". Thesis, KTH, Hälsoinformatik och logistik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-251607.
Testo completoIndustriföretaget Scania CV AB är världsledande inom tillverkning av kommersiella fordon. De tillhandahåller ett modulärt system som inkluderar tunga lastbilar och bussar som kan konfigureras till en rad olika behov. Den här anpassningsförmågan leder dock till ett problem där varje order som tillverkas kan ha en stor varians av hur många montörer som krävs under produktion. I andra ord så har variantmontö-rer ett arbetsflöde som kan skifta från hög arbetsbelastning till låg arbetsbelastning och vice versa under en kort period. För att lösa dessa typer av problem så ska en prototyp med prediktiva egenskaper så som Diskrete Event Simulering (DES). Denna prototyp ska undersöka om det är möjlighet att optimera arbetsscheman för variantmontörer med hjälpa av prediktiva simuleringar. Resultatet av studien blev en implementation i form av en prototyp. Denna prototyp är uppbyggd i två lager; ett datalager samt ett simuleringslager. Datalagret tillhandahåller simuleringslagret med två dataset. Det första datasetet är baserad på historisk data och är härledd från Scania’s produktion i Zwolle. Det andra datasetet är baserat på syntetisk data som är framtagen med en högre utnyttjandegrad för att efterlikna ett bättre produktionssitation med färre produkt varianter att montera. Simuleringslagret består av en DES-model som är modulerad efter en station i slutmontering i Zwolle. Efter att en simulering har exekverats så genererar detta lager ett simuleringsresultat i form av en graf som presenterar utnyttjandegraden för en grupp med variant montörer. Detta sker för varje dataset i datalagret, i detta fall två gånger. Simuleringsresultatet som togs fram visar att det är möjligt att ha skapa simuleringar med prediktiva egenskaper. En långsiktig lösning för Scania’s problem-beskrivningen kräver mer forskning inom möjligheten att kombinera tekniker som DES med prediktiva metoder som ML och GAs.
Stoldt, Johannes [Verfasser], Matthias [Akademischer Betreuer] Putz, Matthias [Gutachter] Putz, Egon [Gutachter] Müller e Uwe [Gutachter] Götze. "Gestaltungsmethodik für Simulationsstudien in Umplanungsprojekten zur Energieeffizienzsteigerung in Fabriken / Johannes Stoldt ; Gutachter: Matthias Putz, Egon Müller, Uwe Götze ; Betreuer: Matthias Putz". Chemnitz : Universitätsverlag Chemnitz, 2019. http://d-nb.info/1219581860/34.
Testo completoShamorad, Randy, e Beraz Omar. "Hur anställda påverkas vid implementering av industri 4.0 i tillverkande företag". Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-54659.
Testo completoBasharkar, Wahidullah. "EFFEKTIVISERING AV BYGGLOGISTIK: TRANSPORT- OCH MATERIALFLÖDE : En fallstudie vid Årstastråket (Etapp 1) i Stockholm". Thesis, Mälardalens högskola, Akademin för ekonomi, samhälle och teknik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-28607.
Testo completoAli, Mahammed Ali. "Studie av artificiell intelligens för ökad resurseffektivitet inom produktionsplanering : En studie med fokus på hur nuvarande samt potentiella implementeringar av artificiell intelligens inom produktionsplanering kan öka resurseffektiviteten hos ett tillverkande företag". Thesis, KTH, Maskinkonstruktion (Inst.), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-299735.
Testo completoThe global introduction of Industry 4.0 has brought with it changes within industry. The indirect consequence of Industry 4.0 being artificial intelligence. The idea of AI is as old as the invention of computers with Alan Turing the father of computer science stating the first description of AI. His thought was that if a machine could be mistaken for a human then the machine was intelligent. The thought being that machine never could outperform humans back then. Now in modern times we have witnessed great feats made by intelligent algorithms where they outperform humans in various fields. For AI to be implemented in industry the most innovative buisness it has to adapt to the workings of indutrial processes. Systematic approach and standardization being two values that strongly represents industries. During the last decade global initiative and investment in innovation of industry. Has led to global competitors such as Germany creating Industry 4.0, The United States creating Smart Manufacturing Leadership Coalition, China introducing their plan called China 2025 and EU with Factories for the future. This paper is a reaction of these enormous investments made into Industry 4.0. The objective of this paper is to examine how AI can help manufacturing enterprises increase their resource efficiency within production planning. Since this field of science stillbeing in its infancy this paper will base its result on interviews made with companies as ABB and Scania. However this field needs more work.
Magnusson, Malin, e Filip Augustsson. "“Ibland kunde man känna att man var på en fabrik, covid-fabriken...” : Intensivvårdssjuksköterskors upplevelser av att vårda på en intensivvårdsavdelning under en rådande pandemi". Thesis, Högskolan i Borås, Akademin för vård, arbetsliv och välfärd, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-26290.
Testo completoFrössling, Jacob, e Tobias Eiman. "Granskning av en Internet of Things-implementering mot industri 4.0 : Från konsultbyråns, beställarens och användarens perspektiv". Thesis, Linnéuniversitetet, Institutionen för informatik (IK), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-76283.
Testo completoDen första industriella revolutionen uppkom vid ångmaskinens framgång, den andra genomelektricitet och den tredje utvecklades med hjälp av IT. Den senaste trenden inom industrinkallas Industri 4.0, vars vision syftar till att skapa automatiserade fabriker. Den nya teknikenkommer inte att utvecklas över en natt och det finns ett flertal faktorer vilka behöverundersökas för att lyckas ta stegen mot visionen. Industri 4.0 medför olika förändringar förföretagen där bland annat människans roll inom verksamheten kommer att påverkas.Studien har genomförts mot ett medelstort industriföretag, vilket strävar efter att utvecklasin verksamhet mot industri 4.0. Författarna har tidigare samarbetat med industriföretagetoch konsultbyrån. Tillsammans utvecklar de en plattform mot Internet of Things (IoT) föratt ta första steget mot en uppkopplad verksamhet. Syftet med studien var att granska enpågående implementering av IoT med fokus på att förstå olika aktörers perspektiv på denframväxande tekniken. Med den utgångspunkten identifierades olika möjligheter ochproblem företagen kommer att behöva ta hänsyn till.Studiens resultat belyser skillnaden mellan olika aktörers perspektiv vilket i framtidenkommer att behöva diskuteras för att hitta en balans. Eftersom studien granskade enpågående implementering identifierades dessutom ett arbetssätt bestående av viktigakomponenter för företag med visionen att börja utveckla sin verksamhet mot industri 4.0visionen.
Andersson, Catharina. "Sippan som hjälpte mot allt. : En studie runt det omfattande bruket av Dr Hjortons pulver som ägde rum i staden Huskvarna och på fabriken Husqvarna AB". Thesis, Jönköping University, School of Education and Communication, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-12748.
Testo completoÅr 1918 härjade spanska sjukan i världen och dödligheten till följd av denna pandemi var stor. Så även i Sverige. I den lilla staden Huskvarna beslutade stadsläkaren att försöka göra så mycket han kunde för att lindra sjukdomen hos invånarna han sörjde för och tillverkade ett influensapulver kallat Dr Hjortons pulver efter honom själv. Pulvret hjälpte inte mycket mot spanskan men de som tog det kände sig allmänt starkare och tyckte att det höjde deras allmänna prestation avsevärt. Detta spred sig bland invånarna i den lilla staden och snart började var och varannan använda det för att må bättre, frisk som sjuk. Detta utvecklades till ett allmänt bruk av pulvret och på 1950 talet låg det på klimax. Det upptäcktes då att användningen led till svåra njursjukdomar som ofta slutade med döden. Efter att en läkares avhandling klarlagt förhållandena så receptbelades pulvret 1961 och långsamt förföll historien i glömska. Dock finns det många uppfattningar och berättelser om vad pulvret var för något, hur det brukades samt huruvida det rörde sig om ett stort missbruk. Syftet med denna uppsats är att klarlägga de förhållanden som egentligen rådde kring bruket av Dr Hjortons pulver i Huskvarna med vikt på den för staden viktiga fabriken Husqvarna AB.
Naqvi, Adel, e Naghadeh Diana Halladgi. "Hur kan implementeringen av Industri 4.0,i synnerhet Internet of Things,i fordonsindustrin bidra till en minskad energiförbrukning under tillverkningen? : En studie med fokus på hur Internet of Things kan resurseffektivisera fordonsindustrin genom en realtidsanalys av en produkts användning och under tillverkning". Thesis, KTH, Skolan för industriell teknik och management (ITM), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-279706.
Testo completoIn recent years, the modern industry has been characterized by new developments in the technological world. There is an ever-increasing need to streamline existing processes and a need to be at the forefront for the innovation of new ones. Industry 4.0 is the culmination of this need, a form of industry that is mainly driven by cyberphysical systems, an integration of the physical with the virtual in the form of wireless connections and cloud technologies. The Internet of Things, also known as IoT, is the connection of physical products to the cloud that enables data recovery and monitoring during and after production, in real-time. IoT exists in various contexts and has been applied to varying degrees in different industries, and has proven to be effective in terms of impacting resource efficiency. In the trading industry, an IoT application to the supply chain resulted in increased customer contact and an improved cooperative relationship. This is a result of real-time analysis of both needs, supply chain shortages and demand. It also has a place in modern grocery stores such as Electronic Shelf Labels (ESL). The information was sought after in online journals, conference reports and past applications. The goal of the study is to establish a relation between these past applications and the automotive industry, to find out how they compare. The automotive industry is at the forefront in terms of applications of Industry 4.0 and IoT. The manufacturer Scania is in the beginning phase of a possible large-scale transition, and the application has already brought improvements. However, much remains to be resolved, including confidentiality issues and extensive expertise on the subject.
Fingal, Anna. "Tändsticksfabriken i Jönköping : en studie om dess barnarbete på 1800 – talet och hur fabriken används i dagens undervisning, då barn i skolår 3 och 4 läser sin lokalhistoria". Thesis, Gotland University, Department of History, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hgo:diva-333.
Testo completoThis paper is a study with two different aspects, with a main focus of the match factory in Jönköping. The first aspect is about how the work situation for children looked like in the match factory during the 1900 - century. The children´s work history over time, the children’s workday and life situation on the factory and outside is described in this paper. The second aspect in this paper is about how the pupils learn about their local history in the 3 and 4 grade. Do the teachers learn their pupils about the factory or not when they study their local history. If they do not, what causes have the teachers mentioned. Answers are too found in this paper.
The material concerning the questions if the match factory used children as workers in their production have I received from a visit on the match factory museum and from an interview with the manager of the museum. The manager also helped me find the material and he gave some information where to find more material as well. An interview with teachers in third to fifth grade in schools in and around Jönköping was the main thing in the second material study. The interview contained questions about how the teachers teach their pupils about local history and if they use the match factory in Jönköping as a complement to the education.
The study showed a lot of different perspectives of how teachers in and around Jönköping have chosen to or not to involve the match factory in the teaching of the local history of Jönköping. The study also show that the environment for young children during this time was very harsh. They had to work almost as much as older people with the same burden but for just a third of the salary, all because of the factory owner´s will to earn as much money as possible.
Johansson, Lundström Malin, e Ingrid Porat. "Hur påverkas produktion i tillverkande företag vid införande av smart teknik? : En studie av de främst påverkade faktorerna undertidsperioden 2011 och framåt". Thesis, KTH, Industriell produktion, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-192551.
Testo completoThe term Industrie 4.0 was first coined in Germany 2011, at the Hannover Messe, the world’s leading Trade Fair for Industrial Technology. It is a term describing the fourth Industrial Revolution. This revolution concerns making production more efficient, environmentally friendly and flexible, by integrating business processes with engineering processes. Since 2011, smart factories and implementation of smart technology in manufacturing has also been a major talking point. Many claim that smart technology and Industrie 4.0, together with the increasing demands for customization, will revolutionize the manufacturing industry and the expectations for what smart technology will contribute with are great. The purpose of the study is to investigate what factors of the production in manufacturing companies are affected by the introduction of smart technology, from year 2011 onwards. The factors identified and investigated are; flexibility, costs, lead times, environmental impact, product quality and reliability. The study was conducted in two stages. First, a literature study to identify and investigate the factors, and second, visits, interviews and verification of the factors with two manufacturing companies who have both implemented smart technology; Scania CV AB and Volvo Car Corporation. During the selected time period, these companies have, together with KTH, participated in the FFI Line information system architecture project (LISA) project where LISA is a type of smart factory; an information architecture. A conclusion to be drawn is that the factors mostly affected by smart technology within the manufacturing industry are some of those identified in this study; flexibility, costs, environmental impact and reliability. Examples of impact are; if an information architecture (for example LISA) is implemented, it becomes easier to implement changes in the factory. This makes the process chain more dynamic, which gives the company greater flexibility. With the help of connected units, companies are faster informed about errors in the production, which makes it possible to decrease the amount of scrap. This leads to cost savings. Also, by using speed-controlled engines and by optimizing the movements of robots, energy can be saved, which leads to less environmental impact and also cost savings. Though, by implementing smart technology, companies also make themselves dependent on wireless connectivity. Therefore, it becomes important to make sure reliable systems are used. Other factors affected by the implementation of smart technology are lead times and product quality, but they are rather affected as consequences of the affection of the other factors, mentioned above. Another conclusion to be drawn is that Industrie 4.0, within Swedish manufacturing, is considered to be an evolution rather than a revolution and smart technology is something that is implemented gradually.
Samen, Linda, e Lisa Bengtsson. "Digitala och analoga tavlor samt uformning av digtal förbättringstavla med fokus på stopporsaker : En fallstudie på Sandvik". Thesis, Högskolan i Gävle, Industriell ekonomi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-32938.
Testo completoDigitalization constitutes a larger part of our everyday lives and one area where digitalization has grown is within the manufacturing industry that is constantly striving to improve. Lean is a philosophy that among other things, is based on continuous improvements and the purpose of the improvements is to reduce waste. Machine stoppage is a type of waste and a potential source of improvement in productions around the world. Another important component is visibility and making information accessible and visible at the right time, in the right place, and to the right target group throughout the factory. One way to make the necessary information visible is through boards. Considering Industry 4.0 and the digitalization that is taking place, digital boards are a current alternative. This is especially motivated currently when pandemics such as covid-19 force industries to quickly transition to a new way of working from different places. The above motivates the purpose of this work, which is to investigate the advantages and disadvantages of digital and analog boards in order to visualize key performance indicators and current status in production. In addition to this, a digital board that can be used in improvement work around stoppage causes will be designed. To fulfil the purpose of the work, information has been obtained from literature and through interviews with the participating companies. This is to investigate what the improvement work on stoppage causes looks like in practice and to investigate what experiences they have regarding analog and digital boards. Regarding digital versus analog boards in general, both advantages and disadvantages have been found in the literature and through interviews. Some advantages are that digital boards are updated automatically and not tied to a physical location. Some disadvantages are that digital boards are more costly than analog boards and that employees can identify less with the information and be critical of it. It has emerged that the process of working with stoppage causes differs among those interviewed, but that there is a connection in their improvement work. The interviewees use computer systems that analyze the stoppage causes that emerge and are then able to present improvement suggestions on how they can be managed. The conclusion is that there are both advantages and disadvantages to digital boards in comparison to analog boards, although the advantages, discovered in both literature and interviews, outweigh the disadvantages. When it comes to designing the digital board, a connection has been discovered throughout the interviews. This connection has justified that the following examples, among others, should be made visible on a digital board: received improvement proposals in conjunction with planned measures, division of responsibilities among employees, and an overview of current stoppage causes.
GYLLENSWÄRD, MIKAEL, e FRANCESCA SALA. "Vilka problem ställs små och medelstora tillverkande företag inför vid införandet av smart teknik? Hur kan dessa problem i största möjliga mån undvikas? : En studie om hur Industri 4.0 på verkar tillverkningsindustrins mindre företag". Thesis, KTH, Industriell produktion, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-233184.
Testo completoIndustry 4.0, the fourth industrial revolution, will change industrial production as we know it. Too often are the pros along with big companies who are a driving force of this revolution discussed; however, in this report the challenges small and medium sized enterprises face when implementing smart technology will be scrutinized. These companies represent over 90% of the Swedish industry and are extremely important for the economy, which is why this was chosen to be examined. The report is based on one theory chapter and one empirical study. The theory has been obtained from several technical publishes and summaries of technical conventions. The empirical study is based on two interviews and one article. One interview with a boss in a smaller industrial company, that focuses on lightning, who has a Master’s of Science in Engineering. The other interview was conducted with an expert in the area for implementing smart technology in SME, engaged in different projects for this purpose and work experience within ABB Robotics. The article is a large empirical study with multiple managers within manufacturing companies. The result is that for Industry 4.0 it is necessary that resources in the shape of competence, economy and machinery exists. That the manufacturing process in standardised, there must be services that helps companies to implement and develop smart technology, and that there is high IT-security in place. Today there is an extreme lack in knowledge and competence at SME concerning smart technology and Industry 4.0. The interest in the subject is weak if even existing. The manufacturing processes are not standardised. The conclusion is that the challenges are the lack of competence, the processes are not standardised, and that it's hard to integrate he technology with the existing machines. These problems are hard to avoid but easy to overcome. Assistance with competence are available and automated robots are on the market. The most important aspect is that the companies have, in the greatest extent possible, a will to evolve.
Feltendal, Johanna, e Johanna Josefsson. "Core Plant knowledge management and transfer". Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-35592.
Testo completoFabriker i internationella tillverkningsnätverk tenderar att ha olika ansvarsområden och roller i nätverket. En vanlig klassificering är att dela in de i en core plant och flera andra produktionsenheter eller systerfabriker (subsidiaries) där core plant innehar en aktiv roll i skapandet och överföringen av kunskap, innovation och “know-how” när det kommer till produkter och processer. Effektiv knowledge management inom tillverkningsnätverket ses som en viktig framgångsfaktor för företag och är följaktligen en fråga med hög strategisk prioritet. I en tid då företagets konkurrensfördelar ligger i förmågan att effektivt överföra kunskap mellan produktionsenheterna i ett nätverk, blir det allt viktigare för core plant och dess systerfabriker att besitta de förmågor som krävs för att kunna hantera komplexiteten i knowledge management. Fabrikerna måste på ett framgångsrikt sätt kunna hantera, överföra, ta emot och tillämpa kunskapen. Syftet med studien är följaktligen att undersöka hur kunskap kan överföras från en core plant till dess systerfabriker samt de förmågor och förutsättningar som krävs av både core plant och systerfabrikerna för att uppnå en effektiv kunskapsöverföring. För att kunna uppnå syftet med studien har en litteraturstudie och en fallstudie, på GKN Aerospace, genomförts. Fallstudien inkluderar semi-strukturerade intervjuer, observationer och dokumentstudier. I fallstudien undersöks knowledge management och kunskapsöverföring både från ett generellt nätverksperspektiv och genom att studera tre tillämpade projekt som har genomförts på fallföretaget. De studerade projekten innefattar kunskapsöverföring och samarbete mellan fabriken i Trollhättan, som har en naturlig men informell roll i att stötta andra fabriker i nätverket, och tre olika produktionsenheter i USA; El Cajon, Newington och Cincinnati. De empiriska resultaten har kategoriserats i två huvuddelar; generella kunskapsöverföringar i nätverket samt de specifika projekten. Resultaten har sedan jämförts med studiens teoretiska referensram i en analys för att tillhandahålla en diskussion kring varje forskningsfråga. Analysen utgör grunden för studiens slutsatser, diskussion och rekommendationer. I studiens slutsatser lyfts betydelsen av att formalisera ansvar och fabrikers roller i ett nätverk. Det är också nödvändigt att tillsätta en grupp av supporterande experter med ansvaret att genomföra och förbättra kunskapsöverföringar samt dela och sprida kunskap inom organisationen. För att kunna uppnå en lyckad kunskapsöverföring mellan fabriker i nätverket är det, ytterligare, av vikt att etablera en tydligt och rättfram strategi i form av knowledge management för att underlätta kunskapsöverföring och -delning i nätverket samt för att reducera komplexiteten. Riktlinjer för att arbeta med kunskapsöverföringar, som har identifierats genom studien är användandet av en strukturerad genomförandeprocess, en gedigen planering, involverande av alla parter i kunskapsöverföringen samt att personligen träffa den mottagande arbetsgruppen på plats på den fabriken.
COPE - Core Plant Excellence
Hjälte, David. "Mot Industri 4.0 genom statistisk dataanalys : En studie om positionen av stansade hål vid Scania Ferruforms saidobalkstillverkning". Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik, konst och samhälle, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-85648.
Testo completoThe fourth industrial revolution, also called Industry 4.0 is powered by several technologies which result in digitalization and automatization of industrial processes. The concept includes the application of big data and advanced analytics, which are said to provide great opportunities for quality improvements. For such a transition to take place, the ability to handle data is crucial. Despite this, many companies today show a lack of use of data to drive decision-making. The question is how companies can manage data and ultimately transition towards Industry 4.0. To research this topic this thesis has been carried out as a case study of a punching process at Scania Ferruform. Through a literature review, quantitative data collection, as well as observations and interviews, the thesis examined the current use of data in the process. Subsequently, data were examined with statistical tools to illustrate how data can be managed in a process to attain increased knowledge about causes of deviations. Lastly, the thesis explored future work towards Industry 4.0. Analysis tools have been used to analyse over 39 000 data points. The result of the study shows that there are opportunities for development in terms of collection, quality and use of data. A framework of how Ferruform should manage data in order to extract new knowledge from its processes is presented. Furthermore, an action plan is presented for a transition towards Industry 4.0. Finally, recommendations are given for further studies. The result of the thesis will be helpful for Ferruform in its transition towards more efficient processes and the technical development of which the company strives towards.
Stengler, Matthias. "Bestandskonforme Weiternutzung von Fabriken: Adequate and sustainable further use of factory buildings". Doctoral thesis, 2011. https://tud.qucosa.de/id/qucosa%3A25935.
Testo completo