Articoli di riviste sul tema "Fabrication additive hybride"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Fabrication additive hybride".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.
Berger, Uwe. "1808 A Survey on Hybrid Fabrication Processes by Integration of Additive and Subtractive Manufacturing". Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2015.8 (2015): _1808–1_—_1808–6_. http://dx.doi.org/10.1299/jsmelem.2015.8._1808-1_.
Gutierrez, Cassie, Rudy Salas, Gustavo Hernandez, Dan Muse, Richard Olivas, Eric MacDonald, Michael D. Irwin et al. "CubeSat Fabrication through Additive Manufacturing and Micro-Dispensing". International Symposium on Microelectronics 2011, n. 1 (1 gennaio 2011): 001021–27. http://dx.doi.org/10.4071/isom-2011-tha4-paper3.
Kumar, Sanjay, Pulak Bhushan, Mohit Pandey e Shantanu Bhattacharya. "Additive manufacturing as an emerging technology for fabrication of microelectromechanical systems (MEMS)". Journal of Micromanufacturing 2, n. 2 (17 giugno 2019): 175–97. http://dx.doi.org/10.1177/2516598419843688.
Li, Yan, Dichen Li, Bingheng Lu, Dajing Gao e Jack Zhou. "Current status of additive manufacturing for tissue engineering scaffold". Rapid Prototyping Journal 21, n. 6 (19 ottobre 2015): 747–62. http://dx.doi.org/10.1108/rpj-03-2014-0029.
He, Liu, Peiren Wang, Lizhe Wang, Min Chen, Haiyun Liu e Ji Li. "Multifunctional Polymer-Metal Lattice Composites via Hybrid Additive Manufacturing Technology". Micromachines 14, n. 12 (30 novembre 2023): 2191. http://dx.doi.org/10.3390/mi14122191.
Ley, Jazmin, Cristian Pantea, John Greenhall e Joseph A. Turner. "Resonant ultrasound spectroscopy of hybrid metal additive manufacturing". Journal of the Acoustical Society of America 154, n. 4_supplement (1 ottobre 2023): A150. http://dx.doi.org/10.1121/10.0023085.
Zhong, Fanchao, Haisen Zhao, Haochen Li, Xin Yan, Jikai Liu, Baoquan Chen e Lin Lu. "VASCO: Volume and Surface Co-Decomposition for Hybrid Manufacturing". ACM Transactions on Graphics 42, n. 6 (5 dicembre 2023): 1–17. http://dx.doi.org/10.1145/3618324.
Berktas, Ilayda, Ali Nejad Ghafar, Patrick Fontana, Ayten Caputcu, Yusuf Menceloglu e Burcu Saner Okan. "Facile Synthesis of Graphene from Waste Tire/Silica Hybrid Additives and Optimization Study for the Fabrication of Thermally Enhanced Cement Grouts". Molecules 25, n. 4 (17 febbraio 2020): 886. http://dx.doi.org/10.3390/molecules25040886.
Hinton, Jack, Dejan Basu, Maria Mirgkizoudi, David Flynn, Russell Harris e Robert Kay. "Hybrid additive manufacturing of precision engineered ceramic components". Rapid Prototyping Journal 25, n. 6 (8 luglio 2019): 1061–68. http://dx.doi.org/10.1108/rpj-01-2019-0025.
Krokoszinski, H. ‐J, H. Oetzmann, H. Gernoth e C. Schmidt. "Additive thin film technology for hybrid circuit fabrication". Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 3, n. 6 (novembre 1985): 2704–7. http://dx.doi.org/10.1116/1.572821.
Freeman, Amihay, Yael Dror, Carmit Ophir Porat, Noa Hadar e Yossi Shacham Diamand. "Silver-Coated Biologically Active Protein Hybrids: Antimicrobial Applications". Applied Mechanics and Materials 749 (aprile 2015): 453–56. http://dx.doi.org/10.4028/www.scientific.net/amm.749.453.
Zafar, Muhammad Qasim, Jinnan Wang, Zhenlin Zhang, Chaochao Wu, Haiyan Zhao, Ghulam Hussain e Ninshu Ma. "Thermomechanical Process Simulation and Experimental Verification for Laser Additive Manufacturing of Inconel®718". Materials 16, n. 7 (24 marzo 2023): 2595. http://dx.doi.org/10.3390/ma16072595.
Wu, Wenzheng, Haiming Wang, Jiaqi Wang, Qingping Liu, Zheng Zhang, Ke Li, Yuhan Gong, Ji Zhao, Luquan Ren e Guiwei Li. "Hybrid Additive Manufacturing of Fused Filament Fabrication and Ultrasonic Consolidation". Polymers 14, n. 12 (12 giugno 2022): 2385. http://dx.doi.org/10.3390/polym14122385.
Pragana, João P. M., Stephan Rosenthal, Ivo M. F. Bragança, Carlos M. A. Silva, A. Erman Tekkaya e Paulo A. F. Martins. "Hybrid Additive Manufacturing of Collector Coins". Journal of Manufacturing and Materials Processing 4, n. 4 (9 dicembre 2020): 115. http://dx.doi.org/10.3390/jmmp4040115.
Baskar, Arun V., Jefrin M. Davidraj, Ajanya M. Ruban, Stalin Joseph, Gurwinder Singh, Ala'a H. Al-Muhtaseb, Jang Mee Lee, Jiabao Yi e A. Vinu. "Fabrication of Mesoporous C60/Carbon Hybrids with 3D Porous Structure for Energy Storage Applications". Journal of Nanoscience and Nanotechnology 21, n. 3 (1 marzo 2021): 1483–92. http://dx.doi.org/10.1166/jnn.2021.19141.
Jeong, Jooyoung, Jia Lee, Jinuk Kim, Jinyoung Chun, DongGyu Kang, Seung Min Han, Changshin Jo e Jinwoo Lee. "A biopolymer-based functional separator for stable Li metal batteries with an additive-free commercial electrolyte". Journal of Materials Chemistry A 9, n. 12 (2021): 7774–81. http://dx.doi.org/10.1039/d0ta12153c.
Hong, Quan, Lan Jiang, Sumei Wang, Ji Huang, Jiaxin Sun, Xin Li, Pei Zuo, Jiangang Yin e Jiangang Lu. "One-Step In Situ Patternable Reduction of a Ag–rGO Hybrid Using Temporally Shaped Femtosecond Pulses". Materials 15, n. 2 (12 gennaio 2022): 563. http://dx.doi.org/10.3390/ma15020563.
Phung, Thanh Huy, Anton Nailevich Gafurov, Inyoung Kim, Sung Yong Kim, Kyoung Min Kim e Taik-Min Lee. "Hybrid Device Fabrication Using Roll-to-Roll Printing for Personal Environmental Monitoring". Polymers 15, n. 12 (15 giugno 2023): 2687. http://dx.doi.org/10.3390/polym15122687.
Kovacev, Nikolina, Sheng Li, Weining Li, Soheil Zeraati-Rezaei, Athanasios Tsolakis e Khamis Essa. "Additive Manufacturing of Novel Hybrid Monolithic Ceramic Substrates". Aerospace 9, n. 5 (7 maggio 2022): 255. http://dx.doi.org/10.3390/aerospace9050255.
Classen, Martin, Jan Ungermann e Rahul Sharma. "Additive Manufacturing of Reinforced Concrete—Development of a 3D Printing Technology for Cementitious Composites with Metallic Reinforcement". Applied Sciences 10, n. 11 (29 maggio 2020): 3791. http://dx.doi.org/10.3390/app10113791.
Saunders, Jacob, Mohammad Elbestawi e Qiyin Fang. "Ultrafast Laser Additive Manufacturing: A Review". Journal of Manufacturing and Materials Processing 7, n. 3 (5 maggio 2023): 89. http://dx.doi.org/10.3390/jmmp7030089.
De Marzi, Anna, Giulio Giometti, Johannes Erler, Paolo Colombo e Giorgia Franchin. "Hybrid additive manufacturing for the fabrication of freeform transparent silica glass components". Additive Manufacturing 54 (giugno 2022): 102727. http://dx.doi.org/10.1016/j.addma.2022.102727.
Min, Chunying, Zengbao He, Haojie Song, Dengdeng Liu, Wei Jia, Jiamin Qian, Yuhui Jin e Li Guo. "Fabrication of Novel CeO2/GO/CNTs Ternary Nanocomposites with Enhanced Tribological Performance". Applied Sciences 9, n. 1 (4 gennaio 2019): 170. http://dx.doi.org/10.3390/app9010170.
Ingle, Dr A. H., Dilip Patle, Shashank Dhawade, Shahrukh Khan, Habib Quraishi e Swapnil Ingole. "Fabrication of Hybrid Engine Vehicle". International Journal for Research in Applied Science and Engineering Technology 11, n. 5 (31 maggio 2023): 2187–90. http://dx.doi.org/10.22214/ijraset.2023.51596.
Pittiglio, Alexandra, Ailey Simpson, Vanessa Costalonga Martins e Hanaa Dahy. "Fibrx Rocking Chair: Design and Application of Tailored Timber as an Embedded Frame for Natural Fibre-Reinforced Polymer (NFRP) Coreless Winding". Polymers 15, n. 3 (18 gennaio 2023): 495. http://dx.doi.org/10.3390/polym15030495.
Amend, Philipp, Oliver Hentschel, Chritian Scheitler, Andrey Igorevich Gorunov e Michael Schmidt. "Effect of Additive Manufactured Metallic Structures on Laser-Based Thermal Joining of Thermoplastic Metal Hybrids". Key Engineering Materials 651-653 (luglio 2015): 777–82. http://dx.doi.org/10.4028/www.scientific.net/kem.651-653.777.
Saptaji, Kushendarsyah, Dindamilenia Choirunnisa Hardiyasanti, Muchammad Fachrizal Ali, Raffy Frandito e Tiara Kusuma Dewi. "Potential Applications of Hydroxyapatite-Mineralized-Collagen Composites as Bone Structure Regeneration: a Review". JOURNAL OF SCIENCE AND APPLIED ENGINEERING 5, n. 1 (16 marzo 2022): 33. http://dx.doi.org/10.31328/jsae.v5i1.3577.
Holzer, K., L. Maier, V. Böhm e W. Volk. "Dimensional precision and wear of a new approach for prototype tooling in deep drawing". IOP Conference Series: Materials Science and Engineering 1284, n. 1 (1 giugno 2023): 012078. http://dx.doi.org/10.1088/1757-899x/1284/1/012078.
Jiménez, Amaia, Prveen Bidare, Hany Hassanin, Faris Tarlochan, Stefan Dimov e Khamis Essa. "Powder-based laser hybrid additive manufacturing of metals: a review". International Journal of Advanced Manufacturing Technology 114, n. 1-2 (19 marzo 2021): 63–96. http://dx.doi.org/10.1007/s00170-021-06855-4.
Stanlykeninxavier, L., P. Elangovan e M. S. S. Saravanakumaar. "Fabrication of Non-precious Vanadium Tungsten Nanocomposite for Enhanced Electrocatalytic Oxygen Reduction Reaction". Asian Journal of Chemistry 33, n. 4 (20 marzo 2021): 919–24. http://dx.doi.org/10.14233/ajchem.2021.23097.
Hao, Jingbin, Xin Chen, Hao Liu e Shengping Ye. "A novel process planning algorithm for additive and subtractive manufacturing based on skeleton tree matching". Rapid Prototyping Journal 24, n. 2 (12 marzo 2018): 441–62. http://dx.doi.org/10.1108/rpj-11-2016-0179.
Mondal, Sudeepta, Daniel Gwynn, Asok Ray e Amrita Basak. "Investigation of Melt Pool Geometry Control in Additive Manufacturing Using Hybrid Modeling". Metals 10, n. 5 (22 maggio 2020): 683. http://dx.doi.org/10.3390/met10050683.
Placzek, Gerrit, e Patrick Schwerdtner. "Concrete Additive Manufacturing in Construction: Integration Based on Component-Related Fabrication Strategies". Buildings 13, n. 7 (11 luglio 2023): 1769. http://dx.doi.org/10.3390/buildings13071769.
Mangrulkar, Mayuribala, e Keith J. Stevenson. "The Progress of Additive Engineering for CH3NH3PbI3 Photo-Active Layer in the Context of Perovskite Solar Cells". Crystals 11, n. 7 (13 luglio 2021): 814. http://dx.doi.org/10.3390/cryst11070814.
Lomte, Amulya, e Bhisham Sharma. "Effect of geometrical defects on the acoustical and transport properties of periodic porous absorbers manufactured using stereolithography". INTER-NOISE and NOISE-CON Congress and Conference Proceedings 266, n. 2 (25 maggio 2023): 273–82. http://dx.doi.org/10.3397/nc_2023_0039.
Kumar, Mohit, e Varun Sharma. "Additive manufacturing techniques for the fabrication of tissue engineering scaffolds: a review". Rapid Prototyping Journal 27, n. 6 (5 luglio 2021): 1230–72. http://dx.doi.org/10.1108/rpj-01-2021-0011.
Melzer, Jeffrey E., e Euan McLeod. "3D Nanophotonic device fabrication using discrete components". Nanophotonics 9, n. 6 (6 giugno 2020): 1373–90. http://dx.doi.org/10.1515/nanoph-2020-0161.
Song, Jian, Qidong Huo, Dongming Li, Bingzhi Chen e Jun Zhang. "Energy-Absorption Behavior of Novel Bio-Inspired Thin-Walled Honeycomb Tubes Filled with TPMS Structure". Coatings 14, n. 6 (27 maggio 2024): 675. http://dx.doi.org/10.3390/coatings14060675.
Kilian, David, Max von Witzleben, Matthew Lanaro, Cynthia S. Wong, Corina Vater, Anja Lode, Mark C. Allenby, Maria A. Woodruff e Michael Gelinsky. "3D Plotting of Calcium Phosphate Cement and Melt Electrowriting of Polycaprolactone Microfibers in One Scaffold: A Hybrid Additive Manufacturing Process". Journal of Functional Biomaterials 13, n. 2 (8 giugno 2022): 75. http://dx.doi.org/10.3390/jfb13020075.
Belle, Stefan, Babette Goetzendorfer e Ralf Hellmann. "Challenges in a Hybrid Fabrication Process to Generate Metallic Polarization Elements with Sub-Wavelength Dimensions". Materials 13, n. 22 (22 novembre 2020): 5279. http://dx.doi.org/10.3390/ma13225279.
Liu, Shuning, Chenchen Liu, Yong You, Yajie Wang, Renbo Wei e Xiaobo Liu. "Fabrication of BaTiO3-Loaded Graphene Nanosheets-Based Polyarylene Ether Nitrile Nanocomposites with Enhanced Dielectric and Crystallization Properties". Nanomaterials 9, n. 12 (22 novembre 2019): 1667. http://dx.doi.org/10.3390/nano9121667.
Zhang, Heng, Quanqing Han, Xin Gao, Xiaoning Tang, Keli Chen e Meng Li. "Impact of reinforcing additives on the structure and performance of composite films based on regenerated cellulose from corn stalk pith". BioResources 14, n. 4 (10 settembre 2019): 8455–69. http://dx.doi.org/10.15376/biores.14.4.8455-8469.
Gjokaj, Vincens, John Papapolymerou, John D. Albrecht e Premjeet Chahal. "Design and Fabrication of Additively Manufactured Hybrid Rigid-Flex RF Components". IEEE Transactions on Components, Packaging and Manufacturing Technology 9, n. 4 (aprile 2019): 779–85. http://dx.doi.org/10.1109/tcpmt.2019.2900210.
Dugar, Jaka, Awais Ikram, Damjan Klobčar e Franci Pušavec. "Sustainable Hybrid Manufacturing of AlSi5 Alloy Turbine Blade Prototype by Robotic Direct Energy Layered Deposition and Subsequent Milling: An Alternative to Selective Laser Melting?" Materials 15, n. 23 (3 dicembre 2022): 8631. http://dx.doi.org/10.3390/ma15238631.
A Whitmore, Stephen. "Development and testing of an all-additively manufactured hybrid thruster for smallsats". Aeronautics and Aerospace Open Access Journal 5, n. 2 (10 agosto 2021): 66–81. http://dx.doi.org/10.15406/aaoaj.2021.05.00129.
Aseni, Paolo, Tommaso Santaniello, Francesco Rizzetto, Lorenzo Gentili, Federico Pezzotta, Francesco Cavaliere, Maurizio Vertemati e Paolo Milani. "Hybrid Additive Fabrication of a Transparent Liver with Biosimilar Haptic Response for Preoperative Planning". Diagnostics 11, n. 9 (21 settembre 2021): 1734. http://dx.doi.org/10.3390/diagnostics11091734.
Kapusuzoglu, Berkcan, e Sankaran Mahadevan. "Physics-Informed and Hybrid Machine Learning in Additive Manufacturing: Application to Fused Filament Fabrication". JOM 72, n. 12 (26 ottobre 2020): 4695–705. http://dx.doi.org/10.1007/s11837-020-04438-4.
Lutter-Günther, Max, Stephan Wagner, Christian Seidel e Gunther Reinhart. "Economic and Ecological Evaluation of Hybrid Additive Manufacturing Technologies Based on the Combination of Laser Metal Deposition and CNC Machining". Applied Mechanics and Materials 805 (novembre 2015): 213–22. http://dx.doi.org/10.4028/www.scientific.net/amm.805.213.
Jiao, Junke, Shengyuan Sun, Zifa Xu, Jiale Wang, Liyuan Sheng e Jicheng Gao. "Fabricating Inner Channels in Laser Additive Manufacturing Process via Thin-Plate-Preplacing Method". Materials 16, n. 19 (26 settembre 2023): 6406. http://dx.doi.org/10.3390/ma16196406.
Ingle, Dr A. H. "Literature Review on the Fabrication of Hybrid Engine Vehicle". International Journal for Research in Applied Science and Engineering Technology 11, n. 6 (30 giugno 2023): 592–96. http://dx.doi.org/10.22214/ijraset.2023.53637.