Articoli di riviste sul tema "Fabrication additive (FDM)"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Fabrication additive (FDM)".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.
Stöckli, Fritz, Fabio Modica e Kristina Shea. "Designing passive dynamic walking robots for additive manufacture". Rapid Prototyping Journal 22, n. 5 (15 agosto 2016): 842–47. http://dx.doi.org/10.1108/rpj-11-2015-0170.
Gutierrez, Cassie, Rudy Salas, Gustavo Hernandez, Dan Muse, Richard Olivas, Eric MacDonald, Michael D. Irwin et al. "CubeSat Fabrication through Additive Manufacturing and Micro-Dispensing". International Symposium on Microelectronics 2011, n. 1 (1 gennaio 2011): 001021–27. http://dx.doi.org/10.4071/isom-2011-tha4-paper3.
Georgopoulou, Antonia, Lukas Egloff, Bram Vanderborght e Frank Clemens. "A Sensorized Soft Pneumatic Actuator Fabricated with Extrusion-Based Additive Manufacturing". Actuators 10, n. 5 (10 maggio 2021): 102. http://dx.doi.org/10.3390/act10050102.
Cuan-Urquizo, Enrique, Mario Martínez-Magallanes, Saúl E. Crespo-Sánchez, Alfonso Gómez-Espinosa, Oscar Olvera-Silva e Armando Roman-Flores. "Additive manufacturing and mechanical properties of lattice-curved structures". Rapid Prototyping Journal 25, n. 5 (10 giugno 2019): 895–903. http://dx.doi.org/10.1108/rpj-11-2018-0286.
Wang, Shushu, Rakshith Badarinath, El-Amine Lehtihet e Vittaldas Prabhu. "Evaluation of Additive Manufacturing Processes in Fabrication of Personalized Robot". International Journal of Automation Technology 11, n. 1 (5 gennaio 2017): 29–37. http://dx.doi.org/10.20965/ijat.2017.p0029.
T., Sathies, Senthil P. e Anoop M.S. "A review on advancements in applications of fused deposition modelling process". Rapid Prototyping Journal 26, n. 4 (30 gennaio 2020): 669–87. http://dx.doi.org/10.1108/rpj-08-2018-0199.
Hu, Xueling, Alix Marcelle Sansi Seukep, Velmurugan Senthooran, Lixin Wu, Lei Wang, Chen Zhang e Jianlei Wang. "Progress of Polymer-Based Dielectric Composites Prepared Using Fused Deposition Modeling 3D Printing". Nanomaterials 13, n. 19 (6 ottobre 2023): 2711. http://dx.doi.org/10.3390/nano13192711.
Raju, Suresh. "Evaluating Impact of Different Parameters in Additive Manufacturing for Complex Situations". INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, n. 05 (2 giugno 2024): 1–5. http://dx.doi.org/10.55041/ijsrem35274.
Laban, Othman, Elsadig Mahdi, Samahat Samim e John-John Cabibihan. "A Comparative Study between Polymer and Metal Additive Manufacturing Approaches in Investigating Stiffened Hexagonal Cells". Materials 14, n. 4 (12 febbraio 2021): 883. http://dx.doi.org/10.3390/ma14040883.
Paterson, Abby Megan, Richard Bibb, R. Ian Campbell e Guy Bingham. "Comparing additive manufacturing technologies for customised wrist splints". Rapid Prototyping Journal 21, n. 3 (20 aprile 2015): 230–43. http://dx.doi.org/10.1108/rpj-10-2013-0099.
Prakash, Kode Jaya, e Shivraj Narayan Yeole. "Design and Additive Manufacturing of a Prototype Using Fused Deposition Modeling Technique". Journal of Mechatronics Machine Design and Manufacturing 6, n. 2 (2024): 1–6. http://dx.doi.org/10.46610/jmmdm.2024.v06i02.001.
Karimi, Armin, Davood Rahmatabadi e Mostafa Baghani. "Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review". Polymers 16, n. 6 (18 marzo 2024): 831. http://dx.doi.org/10.3390/polym16060831.
Besnea, Daniel, Georgeta Ionascu, Mihai Avram, Lucian Bogatu e Alina Spanu. "3D CAD, CAM and Rapid Prototyping Applied for Cam Fabrication". Applied Mechanics and Materials 658 (ottobre 2014): 553–56. http://dx.doi.org/10.4028/www.scientific.net/amm.658.553.
Patterson, Albert E., Charul Chadha e Iwona M. Jasiuk. "Identification and Mapping of Manufacturability Constraints for Extrusion-Based Additive Manufacturing". Journal of Manufacturing and Materials Processing 5, n. 2 (10 aprile 2021): 33. http://dx.doi.org/10.3390/jmmp5020033.
Quiñonez, Paulina A., Leticia Ugarte-Sanchez, Diego Bermudez, Paulina Chinolla, Rhyan Dueck, Truman J. Cavender-Word e David A. Roberson. "Design of Shape Memory Thermoplastic Material Systems for FDM-Type Additive Manufacturing". Materials 14, n. 15 (30 luglio 2021): 4254. http://dx.doi.org/10.3390/ma14154254.
Ulkir, Osman, Mehmet Said Bayraklılar e Melih Kuncan. "Raster Angle Prediction of Additive Manufacturing Process Using Machine Learning Algorithm". Applied Sciences 14, n. 5 (29 febbraio 2024): 2046. http://dx.doi.org/10.3390/app14052046.
Jamal, Muhammad Azfar, Owaisur Rahman Shah, Usman Ghafoor, Yumna Qureshi e M. Raheel Bhutta. "Additive Manufacturing of Continuous Fiber-Reinforced Polymer Composites via Fused Deposition Modelling: A Comprehensive Review". Polymers 16, n. 12 (7 giugno 2024): 1622. http://dx.doi.org/10.3390/polym16121622.
Abas, Muhammad, Mohammed Al Awadh, Tufail Habib e Sahar Noor. "Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites". Polymers 15, n. 17 (1 settembre 2023): 3633. http://dx.doi.org/10.3390/polym15173633.
Olivas, Richard, Rudy Salas, Dan Muse, Eric MacDonald, Ryan Wicker, Mike Newton e Ken Church. "Structural Electronics through Additive Manufacturing and Micro-Dispensing". International Symposium on Microelectronics 2010, n. 1 (1 gennaio 2010): 000940–46. http://dx.doi.org/10.4071/isom-2010-tha5-paper6.
Thorsnes, Quinn S., Paul R. Turner, Mohammed Azam Ali e Jaydee D. Cabral. "Integrating Fused Deposition Modeling and Melt Electrowriting for Engineering Branched Vasculature". Biomedicines 11, n. 12 (24 novembre 2023): 3139. http://dx.doi.org/10.3390/biomedicines11123139.
Naidu, A. Lakshumu, K. Himanth Kumar, G. Ramesh Kumar, L. Vedavathi, J. Naveen Kumar, G. Shanmukha Rao e N. Pavan Kalyan. "A Review on Fabrication and Printing of Carbon Fiber-Reinforced Composite Filaments using FDM Process". International Journal of Membrane Science and Technology 10, n. 2 (30 luglio 2023): 2873–81. http://dx.doi.org/10.15379/ijmst.v10i2.2979.
Galatas, Athanasios, Hany Hassanin, Yahya Zweiri e Lakmal Seneviratne. "Additive Manufactured Sandwich Composite/ABS Parts for Unmanned Aerial Vehicle Applications". Polymers 10, n. 11 (13 novembre 2018): 1262. http://dx.doi.org/10.3390/polym10111262.
Kazberov, Roman Ya. "Application of Polymer Materials and Additive Technologies in Electrical Equipment of the Agro-Industrial Complex". Elektrotekhnologii i elektrooborudovanie v APK 48, n. 4 (dicembre 2021): 51–55. http://dx.doi.org/10.22314/2658-4859-2021-68-4-51-55.
Barreto, Gabriela, Santiago Restrepo, Carlos Mauricio Vieira, Sergio Neves Monteiro e Henry A. Colorado. "Rice Husk with PLA: 3D Filament Making and Additive Manufacturing of Samples for Potential Structural Applications". Polymers 16, n. 2 (15 gennaio 2024): 245. http://dx.doi.org/10.3390/polym16020245.
Mogan, J., W. S. W. Harun, K. Kadirgama, D. Ramasamy, F. M. Foudzi, A. B. Sulong, F. Tarlochan e F. Ahmad. "Fused Deposition Modelling of Polymer Composite: A Progress". Polymers 15, n. 1 (21 dicembre 2022): 28. http://dx.doi.org/10.3390/polym15010028.
Khan, Shaheryar Atta, Bilal Ahmed Siddiqui, Muhammad Fahad e Maqsood Ahmed Khan. "Evaluation of the Effect of Infill Pattern on Mechanical Stregnth of Additively Manufactured Specimen". Materials Science Forum 887 (marzo 2017): 128–32. http://dx.doi.org/10.4028/www.scientific.net/msf.887.128.
Wang, Hao, Hamzeh A. Al Shraida e Jin Yu. "Predictive Modeling of Out-of-Plane Deviation for the Quality Improvement of Additive Manufacturing". Materials Science Forum 1086 (27 aprile 2023): 79–83. http://dx.doi.org/10.4028/p-12034b.
Wang, Yanen, Ray Tahir Mushtaq, Ammar Ahmed, Ammar Ahmed, Mudassar Rehman, Mudassar Rehman, Aqib Mashood Khan et al. "Additive manufacturing is sustainable technology: citespace based bibliometric investigations of fused deposition modeling approach". Rapid Prototyping Journal 28, n. 4 (25 ottobre 2021): 654–75. http://dx.doi.org/10.1108/rpj-05-2021-0112.
Singh, Sunpreet, e Rupinder Singh. "Mechanical characterization and comparison of additive manufactured ABS, Polyflex™ and ABS/Polyflex™ blended functional prototypes". Rapid Prototyping Journal 26, n. 2 (13 gennaio 2020): 225–37. http://dx.doi.org/10.1108/rpj-11-2017-0234.
Patterson, Albert E., Charul Chadha e Iwona M. Jasiuk. "Manufacturing process-driven structured materials (MPDSMs): design and fabrication for extrusion-based additive manufacturing". Rapid Prototyping Journal 28, n. 4 (25 ottobre 2021): 716–31. http://dx.doi.org/10.1108/rpj-04-2021-0072.
Tateno, Toshitake, Yuta Yaguchi e Osamu Hasegawa. "Geometric Accuracy Evaluation of Fabricated Parts by Additive Manufacturing toward Parallel Fabrication". Applied Mechanics and Materials 761 (maggio 2015): 98–103. http://dx.doi.org/10.4028/www.scientific.net/amm.761.98.
Tsao, Che-Chih, Ho-Hsin Chang, Meng-Hao Liu, Ho-Chia Chen, Yun-Tang Hsu, Pei-Ying Lin, Yih-Lin Chou et al. "Freeform additive manufacturing by vari-directional vari-dimensional material deposition". Rapid Prototyping Journal 24, n. 2 (12 marzo 2018): 379–94. http://dx.doi.org/10.1108/rpj-01-2017-0014.
Asadollahi-Yazdi, Elnaz, Julien Gardan e Pascal Lafon. "Multi-objective optimization approach in design for additive manufacturing for fused deposition modeling". Rapid Prototyping Journal 25, n. 5 (10 giugno 2019): 875–87. http://dx.doi.org/10.1108/rpj-07-2018-0186.
R., Prithvirajan, Sugavaneswaran M., Sathishkumar N. e Arumaikkannu G. "Metal bellow hydroforming using additive manufactured die: a case study". Rapid Prototyping Journal 25, n. 4 (13 maggio 2019): 765–74. http://dx.doi.org/10.1108/rpj-07-2018-0182.
Rafael Santana Queiroz, Lucas Marins Batista, Miguel Felipe Nery Vieira, Lucas Cruz da Silva, Bruno Caetano dos Santos Silva e Rodrigo Santiago Coelho. "A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines". JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH 6, n. 1 (8 aprile 2023): 91–97. http://dx.doi.org/10.34178/jbth.v6i1.286.
Drossel, Welf-Guntram, Jörn Ihlemann, Ralf Landgraf, Erik Oelsch e Marek Schmidt. "Basic Research for Additive Manufacturing of Rubber". Polymers 12, n. 10 (1 ottobre 2020): 2266. http://dx.doi.org/10.3390/polym12102266.
Vyavahare, Swapnil, Shailendra Kumar e Deepak Panghal. "Experimental study of surface roughness, dimensional accuracy and time of fabrication of parts produced by fused deposition modelling". Rapid Prototyping Journal 26, n. 9 (13 luglio 2020): 1535–54. http://dx.doi.org/10.1108/rpj-12-2019-0315.
Dontsov, Yury V., Sergey V. Panin, Dmitry G. Buslovich e Filippo Berto. "Taguchi Optimization of Parameters for Feedstock Fabrication and FDM Manufacturing of Wear-Resistant UHMWPE-Based Composites". Materials 13, n. 12 (15 giugno 2020): 2718. http://dx.doi.org/10.3390/ma13122718.
Lanzotti, Antonio, Massimo Martorelli, Teresa Russo e Antonio Gloria. "Design of Additively Manufactured Lattice Structures for Tissue Regeneration". Materials Science Forum 941 (dicembre 2018): 2154–59. http://dx.doi.org/10.4028/www.scientific.net/msf.941.2154.
Bagatella, Simone, Annacarla Cereti, Francesco Manarini, Marco Cavallaro, Raffaella Suriano e Marinella Levi. "Thermally Conductive and Electrically Insulating Polymer-Based Composites Heat Sinks Fabricated by Fusion Deposition Modeling". Polymers 16, n. 3 (4 febbraio 2024): 432. http://dx.doi.org/10.3390/polym16030432.
Ali, Hind B., Jawad K. Oleiwi e Farhad M. Othman. "Compressive and Tensile Properties of ABS Material as a Function of 3D Printing Process Parameters". Revue des composites et des matériaux avancés 32, n. 3 (30 giugno 2022): 117–23. http://dx.doi.org/10.18280/rcma.320302.
Fountas, Nikolaos A., Ioannis Papantoniou, John D. Kechagias, Dimitrios E. Manolakos e Nikolaos M. Vaxevanidis. "Experimental and statistical investigation on flexural properties of FDM fabricated PLA specimens applying response surface methodology". Journal of Physics: Conference Series 2692, n. 1 (1 febbraio 2024): 012047. http://dx.doi.org/10.1088/1742-6596/2692/1/012047.
Bamiduro, Oluwakayode, Gbadebo Owolabi, Mulugeta A. Haile e Jaret C. Riddick. "The influence of load direction, microstructure, raster orientation on the quasi-static response of fused deposition modeling ABS". Rapid Prototyping Journal 25, n. 3 (8 aprile 2019): 462–72. http://dx.doi.org/10.1108/rpj-04-2018-0087.
Pranzo, Daniela, Piero Larizza, Daniel Filippini e Gianluca Percoco. "Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications: A Topical Review". Micromachines 9, n. 8 (27 luglio 2018): 374. http://dx.doi.org/10.3390/mi9080374.
Syrlybayev, Daniyar, Beibit Zharylkassyn, Aidana Seisekulova, Mustakhim Akhmetov, Asma Perveen e Didier Talamona. "Optimisation of Strength Properties of FDM Printed Parts—A Critical Review". Polymers 13, n. 10 (14 maggio 2021): 1587. http://dx.doi.org/10.3390/polym13101587.
M. Johnson, Wayne, Matthew Rowell, Bill Deason e Malik Eubanks. "Comparative evaluation of an open-source FDM system". Rapid Prototyping Journal 20, n. 3 (14 aprile 2014): 205–14. http://dx.doi.org/10.1108/rpj-06-2012-0058.
Podsiadły, Bartłomiej, Piotr Matuszewski, Andrzej Skalski e Marcin Słoma. "Carbon Nanotube-Based Composite Filaments for 3D Printing of Structural and Conductive Elements". Applied Sciences 11, n. 3 (30 gennaio 2021): 1272. http://dx.doi.org/10.3390/app11031272.
Singh, Rupinder, Ranvijay Kumar, Ilenia Farina, Francesco Colangelo, Luciano Feo e Fernando Fraternali. "Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures". Polymers 11, n. 1 (4 gennaio 2019): 62. http://dx.doi.org/10.3390/polym11010062.
García-Martínez, Héctor, Ernesto Ávila-Navarro, Germán Torregrosa-Penalva, Alberto Rodríguez-Martínez, Carolina Blanco-Angulo e Miguel A. de la de la Casa-Lillo. "Low-Cost Additive Manufacturing Techniques Applied to the Design of Planar Microwave Circuits by Fused Deposition Modeling". Polymers 12, n. 9 (28 agosto 2020): 1946. http://dx.doi.org/10.3390/polym12091946.
Ulkir, Osman. "Energy-Consumption-Based Life Cycle Assessment of Additive-Manufactured Product with Different Types of Materials". Polymers 15, n. 6 (15 marzo 2023): 1466. http://dx.doi.org/10.3390/polym15061466.