Articoli di riviste sul tema "Epoxy Mold Compound"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Epoxy Mold Compound".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.
Kumari, Pinki, Kuldeep Singh e Anuj Singal. "Reducing the Hygroscopic Swelling in MEMS Sensor using Different Mold Materials". International Journal of Electrical and Computer Engineering (IJECE) 10, n. 1 (1 febbraio 2020): 494. http://dx.doi.org/10.11591/ijece.v10i1.pp494-499.
Testo completoLakhera, Nishant, Sandeep Shantaram e AR Nazmus Sakib. "Adhesion Characteristics of Epoxy Molding Compound and Copper Leadframe Interface: Impact of Environmental Reliability Stresses". International Symposium on Microelectronics 2017, n. 1 (1 ottobre 2017): 000304–11. http://dx.doi.org/10.4071/isom-2017-wa53_009.
Testo completoDeringer, Tim, e Dietmar Drummer. "The influence of mold temperature on thermoset in-mold forming". Journal of Polymer Engineering 40, n. 3 (25 febbraio 2020): 256–66. http://dx.doi.org/10.1515/polyeng-2019-0322.
Testo completoSulong, Abu Bakar, Gan Tek Keong e Jaafar Sahari. "Effects of Molding Parameters and Addition of Fillers on Gate Chip Off Formation during the Degating Process in Transfer Molding". Key Engineering Materials 447-448 (settembre 2010): 790–94. http://dx.doi.org/10.4028/www.scientific.net/kem.447-448.790.
Testo completoChen, Hwe-Zhong, Wen-Hung Lee, Huei-Huang Lee, Durn-Yuan Huang, Shyang-Jye Chang e Sheng-Jye Hwang. "Effects of defrosting period on mold adhesion force of epoxy molding compound". Asia-Pacific Journal of Chemical Engineering 4, n. 2 (marzo 2009): 161–68. http://dx.doi.org/10.1002/apj.186.
Testo completoBrueckner, Julia, Michael Schwander, Moritz Jurgschat e Ramon Tuason. "Effective Inspection Methods for Advanced Packaging Technologies". International Symposium on Microelectronics 2017, n. 1 (1 ottobre 2017): 000563–68. http://dx.doi.org/10.4071/isom-2017-tha32_055.
Testo completoHsu, Hsiang-Chen, Shih-Jeh Wu, Wen-Fei Lin e Boen Houng. "Reliability Design and Optimization Process on through Mold via using Ultrafast Laser". Polymers and Polymer Composites 26, n. 1 (gennaio 2018): 1–8. http://dx.doi.org/10.1177/096739111802600101.
Testo completoLakhera, Nishant, Tom Battle, Sheila Chopin, Sandeep Shantaram e Akhilesh K. Singh. "Technique to predict reliability failure in side-gate transfer molded packages". International Symposium on Microelectronics 2015, n. 1 (1 ottobre 2015): 000696–701. http://dx.doi.org/10.4071/isom-2015-tha61.
Testo completoMurali, Sarangapani, Bayaras Abito Danila e Zhang Xi. "Reliability of Coated and Alloyed Copper/Silver Ball Bonds". International Symposium on Microelectronics 2017, n. 1 (1 ottobre 2017): 000318–24. http://dx.doi.org/10.4071/isom-2017-wa55_128.
Testo completoXu, Wen Jiao, e Shu Yu Lu. "Recycling of Thermosetting Epoxy Molding Compound Waste into PVC Composites: Effect of Silane Coupling Agent on Morphology and Physical Properties". Advanced Materials Research 311-313 (agosto 2011): 1496–500. http://dx.doi.org/10.4028/www.scientific.net/amr.311-313.1496.
Testo completoYoo, Do-Jae, Jong-In Ryu, Gyu-Hwan Oh, Yong-Choon Park, Ki-Ju Lee, Jin-Su Kim, Jong-Woo Choi et al. "PMV (Plating Mold Via) interconnection development in molded SiP modules". International Symposium on Microelectronics 2014, n. 1 (1 ottobre 2014): 000777–82. http://dx.doi.org/10.4071/isom-thp11.
Testo completoJha, Vibhash, e Torsten Hauck. "Moldflow simulation of an exposed pad leaded package". International Symposium on Microelectronics 2015, n. 1 (1 ottobre 2015): 000179–84. http://dx.doi.org/10.4071/isom-2015-tp65.
Testo completoVogelwaid, Julian, Martin Bayer, Michael Walz, Felix Hampel, Larysa Kutuzova, Günter Lorenz, Andreas Kandelbauer e Timo Jacob. "Optimizing Epoxy Molding Compound Processing: A Multi-Sensor Approach to Enhance Material Characterization and Process Reliability". Polymers 16, n. 11 (30 maggio 2024): 1540. http://dx.doi.org/10.3390/polym16111540.
Testo completoMorais, Pedro, Alireza Akhavan-Safar, Ricardo J. C. Carbas, Eduardo A. S. Marques, Bala Karunamurthy e Lucas F. M. da Silva. "Mode I Fatigue and Fracture Assessment of Polyimide–Epoxy and Silicon–Epoxy Interfaces in Chip-Package Components". Polymers 16, n. 4 (7 febbraio 2024): 463. http://dx.doi.org/10.3390/polym16040463.
Testo completoHan, S., K. K. Wang e D. L. Crouthamel. "Wire-Sweep Study Using an Industrial Semiconductor-Chip-Encapsulation Operation". Journal of Electronic Packaging 119, n. 4 (1 dicembre 1997): 247–54. http://dx.doi.org/10.1115/1.2792245.
Testo completoHu, S. Y., Y. P. Chang, W. R. Jong e S. C. Chen. "Effect of mold heat transfer on the curing reaction of epoxy molding compound during transfer molding". International Communications in Heat and Mass Transfer 23, n. 6 (ottobre 1996): 779–88. http://dx.doi.org/10.1016/0735-1933(96)00061-9.
Testo completoJeong, Haksan, Kwang-Ho Jung, Choong-Jae Lee, Kyung Deuk Min, Woo-Ram Myung e Seung-Boo Jung. "Effect of epoxy mold compound and package dimensions on the thermomechanical properties of a fan-out package". Journal of Materials Science: Materials in Electronics 31, n. 9 (26 marzo 2020): 6835–42. http://dx.doi.org/10.1007/s10854-020-03243-8.
Testo completoPeanpunga, Udom, Kessararat Ugsornrat, Panakamol Thorlor e Chalermsak Sumithpibul. "The Effect of Epoxy Molding Compound Floor Life to Reliability Performance and mold ability for QFN Package". Journal of Physics: Conference Series 901 (settembre 2017): 012088. http://dx.doi.org/10.1088/1742-6596/901/1/012088.
Testo completoHan, S., e K. K. Wang. "Flow Analysis in a Chip Cavity During Semiconductor Encapsulation". Journal of Electronic Packaging 122, n. 2 (11 gennaio 1999): 160–67. http://dx.doi.org/10.1115/1.483149.
Testo completoPei, Chien-Chang, e Sheng-Jye Hwang. "Prediction of Wire Sweep During the Encapsulation of IC Packaging With Wire Density Effect". Journal of Electronic Packaging 127, n. 3 (3 novembre 2004): 335–39. http://dx.doi.org/10.1115/1.1939028.
Testo completoYoo, Do-Jae, Ki-Chan Kim, Young-Hoon Kwak, Min-Seok Jang, Job Ha, Jae-Cheon Doh, Chang-Bae Lee e Young-Do Kweon. "Molded Underfill (MUF) Technology Development for SiP Module with Fine Flip Chip". International Symposium on Microelectronics 2010, n. 1 (1 gennaio 2010): 000204–11. http://dx.doi.org/10.4071/isom-2010-tp2-paper2.
Testo completoWong, Fu Mauh, Chee Keong Chong e K. N. Seetharamu. "Transient Thermal Analysis of Wave Soldering Process for an Optical Encoder Module". Journal of Microelectronics and Electronic Packaging 1, n. 3 (1 luglio 2004): 145–56. http://dx.doi.org/10.4071/1551-4897-1.3.145.
Testo completoKhalilullah, Ibrahim, Talukder Reza, Liangbiao Chen, Mark Placette, A. K. M. Monayem H. Mazumder, Jiang Zhou, Jiajie Fan, Cheng Qian, Guoqi Zhang e Xuejun Fan. "In-situ characterization of moisture absorption and hygroscopic swelling of silicone/phosphor composite film and epoxy mold compound in LED packaging". Microelectronics Reliability 84 (maggio 2018): 208–14. http://dx.doi.org/10.1016/j.microrel.2018.03.025.
Testo completoTsvetkov, Yuriy, Evgeniy Gorbachenko e Roman Larin. "Friction Impact on the Accuracy of the Dependence of Micro-Hardness on Plastic Deformation in Testing Metals under Uniaxial Compression". Key Engineering Materials 909 (4 febbraio 2022): 132–38. http://dx.doi.org/10.4028/p-rc91j5.
Testo completoShih, Meng-Kai, Tai-Kuang Lee e Jin-Gyao Chang. "Warpage modeling and characterization of intelligent power modules (IPMs)". Journal of Mechanics 37 (2021): 543–50. http://dx.doi.org/10.1093/jom/ufab025.
Testo completoLee, Chu-Chung, TuAnh Tran, Varughese Mathew, Rusli Ibrahim e Poh-Leng Eu. "Copper Ball Voids: Failure Mechanisms and Methods of Controlling at High Temperature Automotive Application". Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2019, DPC (1 gennaio 2019): 000519–30. http://dx.doi.org/10.4071/2380-4491-2019-dpc-presentation_tp3_013.
Testo completoChopin, Sheila F., e Varughese Mathew. "Controlling Extrinsic Chloride Ions Effect on Copper Wirebond Reliability". International Symposium on Microelectronics 2019, n. 1 (1 ottobre 2019): 000095–99. http://dx.doi.org/10.4071/2380-4505-2019.1.000095.
Testo completoLau, John, Ming Li, Nelson Fan, Eric Kuah, Zhang Li, Kim Hwee Tan, Tony Chen et al. "Fan-Out Wafer-Level Packaging (FOWLP) of Large Chip with Multiple Redistribution-Layers (RDLs)". International Symposium on Microelectronics 2017, n. 1 (1 ottobre 2017): 000576–83. http://dx.doi.org/10.4071/isom-2017-tha35_056.
Testo completoLau, John, Ming Li, Nelson Fan, Eric Kuah, Zhang Li, Kim Hwee Tan, Tony Chen et al. "Fan-Out Wafer-Level Packaging (FOWLP) of Large Chip with Multiple Redistribution Layers (RDLs)". Journal of Microelectronics and Electronic Packaging 14, n. 4 (1 ottobre 2017): 123–31. http://dx.doi.org/10.4071/imaps.522798.
Testo completoFowler, Michelle, John P. Massey, Matthew Koch, Kevin Edwards, Tanja Braun, Steve Voges, Robert Gernhardt e Markus Wohrmann. "Advances in Temporary Bonding and Debonding Technologies for use with Wafer-Level System-in-Package (WLSiP) and Fan-Out Wafer-Level Packaging (FOWLP) Processes". International Symposium on Microelectronics 2018, n. 1 (1 ottobre 2018): 000051–56. http://dx.doi.org/10.4071/2380-4505-2018.1.000051.
Testo completoCoudrain, Perceval, Arnaud Garnier, Laetitia Castagné, Aurélia Plihon, Rémi Vélard, Rémi Franiatte, Jean-Charles Souriau, Jeanne Pignol, Célia Darrambide e Emmanuel Ollier. "(Invited) Fan-out Wafer-Level Packaging: Opportunities and Challenges Towards Heterogeneous Systems". ECS Meeting Abstracts MA2022-02, n. 17 (9 ottobre 2022): 849. http://dx.doi.org/10.1149/ma2022-0217849mtgabs.
Testo completoTeixeira, Jorge, Mário Ribeiro e Nélson Pinho. "Advanced warpage characterization for FOWLP". International Symposium on Microelectronics 2013, n. 1 (1 gennaio 2013): 000641–46. http://dx.doi.org/10.4071/isom-2013-wp21.
Testo completoKitaoka, Satoshi, Naoki Kawashima, Masato Yoshiya, Shigeru Miyagawa, Yoshinori Noguchi e Kazuhiro Ikemura. "Improving Releasability of Mold Materials for IC Encapsulation Using Epoxy Compounds". Materials Science Forum 706-709 (gennaio 2012): 2529–34. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.2529.
Testo completoKitaoka, Satoshi, Naoki Kawashima, Keiji Maeda, Takaki Kuno e Yoshinori Noguchi. "Design of Mold Materials for Encapsulating Semiconductors Using Epoxy Molding Compounds". Materials Science Forum 561-565 (ottobre 2007): 539–42. http://dx.doi.org/10.4028/www.scientific.net/msf.561-565.539.
Testo completoBest, Keith, Steve Gardner e Casey Donaher. "PHOTOLITHOGRAPHY ALIGNMENT MARK TRANSFER SYSTEM FOR LOW COST ADVANCED PACKAGING AND BONDED WAFER APPLICATIONS". International Symposium on Microelectronics 2016, n. 1 (1 ottobre 2016): 000315–20. http://dx.doi.org/10.4071/isom-2016-wp34.
Testo completoSwarbrick, Tom, Keith Best, Casey Donaher e Steve Gardner. "Photolithography Alignment Mark Transfer System for Low Cost, Advanced Packaging, and Bonded Wafer Applications". Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2016, DPC (1 gennaio 2016): 001302–27. http://dx.doi.org/10.4071/2016dpc-wp16.
Testo completoScopa Kelso, Rebecca, Brannon I. Hulsey e Kathryn R. D. Driscoll. "Dental molding compounds and casts". Dental Anthropology Journal 33, n. 1 (7 gennaio 2020): 17–22. http://dx.doi.org/10.26575/daj.v33i1.290.
Testo completoPlacette, Mark D., Xuejun Fan, Jie-Hua Zhao e Darvin Edwards. "Dual stage modeling of moisture absorption and desorption in epoxy mold compounds". Microelectronics Reliability 52, n. 7 (luglio 2012): 1401–8. http://dx.doi.org/10.1016/j.microrel.2012.03.008.
Testo completoZhang, Yong Di, Bin Zhang, Yan Fang Yue e Guang Yang. "Manufacturing Process of EP Matrix Composite Rapid Injection Mold and Application Case". Advanced Materials Research 1061-1062 (dicembre 2014): 460–64. http://dx.doi.org/10.4028/www.scientific.net/amr.1061-1062.460.
Testo completoBelton, D. "The Effect of Post-Mold Curling Upon the Microstructure of Epoxy Molding Compounds". IEEE Transactions on Components, Hybrids, and Manufacturing Technology 10, n. 3 (settembre 1987): 358–63. http://dx.doi.org/10.1109/tchmt.1987.1134754.
Testo completoMurniati, Murniati, Erin Ryantin Gunawan, Dedy Suhendra, Dina Asnawati e Pujana Qurba. "Sintesis Senyawa-Senyawa Epoksi dari Asam Lemak Minyak Nyamplung (Calophyllum inophyllum L.)". Jurnal Riset Kimia 13, n. 1 (13 marzo 2022): 89–99. http://dx.doi.org/10.25077/jrk.v13i1.447.
Testo completoAhmad Temizi, Muhammad Afhnan, Meor Iqram Meor Ahmad, Nor Kamaliana Khamis e Muhammad Yunus Ahmad Samsudin. "Study of Mechanical and Thermal Properties for Epoxy Grouts Subjected to Seawater Conditioning at Elevated Temperature: Tensile Test and Compressive Test". Jurnal Kejuruteraan 34, n. 6 (30 novembre 2022): 1017–25. http://dx.doi.org/10.17576/jkukm-2022-34(6)-03.
Testo completoZhang, Kun Liang, Bin Hong, Li Peng Zhang, Ya Ji, Zhen Dong Gao e Jian Ye Gao. "The Pouring Process Optimization for the Conductive Slip-Rin". Materials Science Forum 943 (gennaio 2019): 48–52. http://dx.doi.org/10.4028/www.scientific.net/msf.943.48.
Testo completoAbdulRazaq, Jaafar Sh, Abdul Kareem F. Hassan e Nuha H. Jasim. "Characterization of the mechanical properties and thermal conductivity of epoxy-silica functionally graded materials". AIMS Materials Science 10, n. 1 (2023): 182–99. http://dx.doi.org/10.3934/matersci.2023010.
Testo completoDecker, John A. "Graphite-Epoxy Acoustic Guitar Technology". MRS Bulletin 20, n. 3 (marzo 1995): 37–39. http://dx.doi.org/10.1557/s0883769400044390.
Testo completoIshikawa, Yuki, Tomoya Takao e Takeyasu Saito. "Obtaining thermal resistance of mold compounds using a package structure model with a heat-generating test element group: Comparison of the thermal conductivity and glass transition temperature of epoxy mold compounds". Microelectronics Reliability 151 (dicembre 2023): 115233. http://dx.doi.org/10.1016/j.microrel.2023.115233.
Testo completoChiu, S. M., S. J. Hwang, C. W. Chu e Dershin Gan. "The influence of Cr-based coating on the adhesion force between epoxy molding compounds and IC encapsulation mold". Thin Solid Films 515, n. 1 (settembre 2006): 285–92. http://dx.doi.org/10.1016/j.tsf.2005.12.141.
Testo completoAbdullah, Shahrum, Mohd Faridz Mod Yunoh, Azman Jalar e Mohamad Faizal Abdullah. "Hardness Test on an Epoxy Mold Compounds of a Quad Flat No Lead Package Using the Depth Sensing Nanoindentation". Advanced Materials Research 146-147 (ottobre 2010): 1000–1003. http://dx.doi.org/10.4028/www.scientific.net/amr.146-147.1000.
Testo completoAhn, Woojin, Muhammad Ashraful Alam, Davide Cornigli, Susanna Reggiani, Dhanoop Varghese e Srikanth Krishnan. "Space Charge Redistribution in Epoxy Mold Compounds of High-Voltage ICs at Dry and Wet Conditions: Theory and Experiment". IEEE Transactions on Dielectrics and Electrical Insulation 28, n. 6 (dicembre 2021): 2043–51. http://dx.doi.org/10.1109/tdei.2021.009817.
Testo completoKliegel, Wolfgang, Jörg Metge, Steven J. Rettig e James Trotter. "Novel boron chelate complexes from the reaction of salicylaldehydes, tertiary amines, and diphenylborinic or phenylboronic acid. Crystal and molecular structures of two new types of chelated organoborate salts". Canadian Journal of Chemistry 75, n. 9 (1 settembre 1997): 1203–14. http://dx.doi.org/10.1139/v97-145.
Testo completo