Bibliografie tematiche / DSC

Indice

  1. Articoli di riviste
  2. Tesi
  3. Libri
  4. Capitoli di libri
  5. Atti di convegni
  6. Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "DSC"

Autore: Grafiati
Pubblicato: 4 giugno 2021
Ultima modifica: 22 giugno 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "DSC".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "DSC"

1

Arbildo-Vega, Heber, Fredy Cruzado-Oliva e Edward Infantes-Ruiz. "Dental stem cells and their application in dentistry." Journal of Oral Research 9, n. 3 (30 giugno 2020): 220–33. http://dx.doi.org/10.17126/joralres.2020.039.

Testo completo
Abstract (sommario):
Recent advances in tissue engineering and regenerative medicine offer a long-term solution through biological repair, replacement of damaged teeth or maintenance and improvement of tissue and organ function through the use of stem cells. Stem cells or also called universal cells, progenitor cells or precursor cells; they are primitive, undifferentiated, clonogenic cells that are characterized by their self-renewal capabilities and that can be differentiated into more specialized cells with specific functions. Currently many sources are known from where you can obtain stem cells, one of which are those obtained from oral or dental tissues, called dental stem cells (DSC), from where it has been possible to identify, isolate and characterize around 8 unique populations: dental pulp stem cells (DPSC), human exfoliated deciduous tooth stem cells (SHED), periodontal ligament stem cells (PLDSC), dental follicle stem cells (DFSC), stem cells derived from bone alveolar (CMHA), the stem cells of the apical papilla (SCAP), the stem cells of the dental germ (DGSC) and the gingival stem cells (GSC). These DSC have attracted attention in recent years due to their accessibility, plasticity and high proliferation capacity. Currently, DSC have shown that they can be used in endodontic and periodontal regenerative therapy, in the regeneration of dentin and bone and in dental bioengineering. Tissue engineering methodologies combined with a greater understanding of the biology of DSCs will provide powerful tools for a broader spectrum of their application in various future therapeutic strategies.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Huang, Chang Biao, Kai Yong Jiang e Xi Peng Xu. "A New Approach to the Communication of the Distributed Collaborative System Based on COM+". Materials Science Forum 532-533 (dicembre 2006): 1148–51. http://dx.doi.org/10.4028/www.scientific.net/msf.532-533.1148.

Testo completo
Abstract (sommario):
In this paper COM+ based on Microsoft .NET is adopted to realize a Distributed Collaborative System (DCS). This system adopts a complex architecture combined C/S with B/S to reduce the remote communication and improve the performance. By means of IE or other browsers, a client can download client tool, register or login, search or publish information via the collaborative website. After installing the client tool, a client can automatically receive the collaborative requests or invitations from the collaborative server and collaborate with other participators. The system utilizes COM+ services to realize the Distributed Synchronous Communication (DSC) and Distributed Asynchronous Communication (DAC). Loosely Coupled Event (LCE) service can make DSC true easily and effectively. Transaction service, Queued Component (QC) service and Windows NT Service can be applied to realize DAC efficiently and reliably.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Kunitomo, Osamu, Isao Satoh e Masanori Hiroshima. "Reduction of Conveyance Power Consumption of District Cooling and Heating Systems using Demand-Supply Coordinated Control". E3S Web of Conferences 111 (2019): 06008. http://dx.doi.org/10.1051/e3sconf/201911106008.

Testo completo
Abstract (sommario):
This study aims to discuss the effectiveness of “Demand-Supply Coordinated control” in reducing the power consumption required for conveyance by the heat transport medium in District Cooling and Heating (DHC) systems. The problem with DHC systems is that increased conveyance power is required to provide heating to consumers. As one of the measures to solve this problem, Demand-Supply Coordinated (DSC) control is introduced; however, its effectiveness and limitations have not been clarified so far. In this paper, first, the fundamental characteristics of a DHC system under DSC control are numerically examined. The results showed that the conveyance power consumption of DHC systems under DSC control can be classified into three regions, depending on the relative rate of demand change against the load-following capability of the heat source. Next, the authors compared the conveyance power of DSC control with that of Constant Supply Pressure (CSP) control adopted in conventional DHC, and showed regularity for each of the three regions mentioned above. Finally, the authors show the appearance frequency of these three regions of the practical DHC system under a real heat load in Japan. The results showed that the conveyance power required for DSC control is markedly lower than that of CSP control.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Dickerson, J. W. T., e M. I. Gurr. "Roy H. Smith PhD, DSc, DIC." Nutrition Research Reviews 4, n. 1 (gennaio 1991): 1. http://dx.doi.org/10.1079/nrr19910004.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Cheng, Tzu-Hsuan, Kenji Nishiguchi, Yoshi Fukawa e Douglas C. Hopkins. "Thermal and Reliability Performance Comparison of DBC-Based and Organic-Based Double-Sided Cooled Power Modules". International Symposium on Microelectronics 2021, n. 1 (1 ottobre 2021): 000382–89. http://dx.doi.org/10.4071/1085-8024-2021.1.000382.

Testo completo
Abstract (sommario):
Abstract Direct Bonded Copper (DBC) is the most popular solution for conventional high-power modules because of superior thermal/electrical/mechanical performance and mature manufacturing. To meet the rising demand of power density and power rating, a Double-Sided Cooled (DSC) sandwich structure using dual insulated metal-clad substrates was proposed and DBC still dominated the substrate selection of DSC power modules. However, there are several long-existing reliability challenges of conventional DBC-based power modules and the cost of DBC is relatively high compared with organic and metal (e.g. lead frame) substrates. This study proposes a DSC 1.2 kV half-bridge power module using dual epoxy-resin Insulated Metal Substrate (eIMS) for solving DBC-based power module issues and providing a cost-effective solution. The thermal performance outperforms traditional Alumina (Al2O3) DBC-based DSC power module due to moderate thermal conductivity (10 W/mK) and thin (120 μm) epoxy-resin composite dielectric layer compared with Alumina. The breakdown voltage of this high thermally conductive organic dielectric is 5 kVAC (@ 120 μm) and the Glass Transition Temperature (Tg) is 300°C which is indispensable for Wide-Band-Gap (WBG) devices and high-power applications. In terms of thermal-mechanical reliability, the organic-based DSC power module can pass the thermal cycling test over 2000 cycles by optimizing the mechanical properties of the encapsulant material. In conclusion, this paper not only proposes a competitive organic-based power module but also a methodology of evaluation for thermal and mechanical performance.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

ZUCKERMAN, LORD. "Sir Terence Morrison-Scott DSC, DSc". Journal of Zoology 228, n. 1 (settembre 1992): 1–4. http://dx.doi.org/10.1111/j.1469-7998.1992.tb04428.x.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Skrzyński, S., A. Sionkowska e A. Marciniak. "DSC Study of Collagen in Disc Disease". Journal of Biophysics 2009 (9 febbraio 2009): 1–4. http://dx.doi.org/10.1155/2009/819635.

Testo completo
Abstract (sommario):
Differential scanning calorimetry (DSC) has been used to estimate the effect of disc disease on the collagen helix-coil transition and morphology for tissue extracted from patients during surgical operation. Forty discs were obtained from patients with degenerative disc disease undergoing surgery for low back pain. The patients were in the age between 20 and 70 years old. The specimens were kept wet during DSC experiment. The data allow the comparison between thermal stability of collagen tissue from healthy patients and from patients suffering from disc disease. In the paper the comparison between thermal helix-coil transition for collagen fibers from patients suffering from disc disease and collagen fibers from healthy organisms has been discussed. The heating rate has an influence on the position on denaturation temperatures of collagen in disc tissues. Higher helix-coil transition temperature of collagen in degenerated disc suggests that additional intermolecular cross linking of collagen fibers occurs. Denaturation temperatures of collagen in degenerated male disc possess smaller values than in female ones. Disc disease induces changes in collagen structure and leads to formation of additional crosslinks between collagen fibers.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Costagli, Giacomo. "The use of disc stack centrifuge in the virgin olive oil industry". Journal of Agricultural Engineering 49, n. 2 (9 luglio 2018): 75–80. http://dx.doi.org/10.4081/jae.2018.784.

Testo completo
Abstract (sommario):
The disc stack centrifuge (DSC) in the virgin olive oil (VOO) industry is widely used for oil purification at a final stage of extraction process. The obtained oil should be commercialized directly as turbid or sent to settling and/or filtration. Despite technology is strongly consolidated, few literature is available on the effect of DSC on efficiency and quality of VOO, specially compared with alternative methods. Alternative technologies to DSC like settling or direct filtration are suitable only for very small production scale. Application of advanced technology already available for DSC like hermetic design is applicable also to VOO but more research is necessary to establish effect on quality and cost/benefit ratio. Improvement of installation module and a more appropriate use of DSC on VOO industry are recommended to reduce water consumption and consequent loss of VOO quality.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Alouani, K., M. Siniti, F. Schiets e P. Claudy. "Heat transfer in a disc-type DSC apparatus". Journal of Thermal Analysis and Calorimetry 89, n. 1 (luglio 2007): 37–43. http://dx.doi.org/10.1007/s10973-006-8263-1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Siniti, M., F. Schiets, K. Alouani e P. Claudy. "Heat transfer in a disc-type DSC apparatus". Journal of Thermal Analysis and Calorimetry 89, n. 1 (luglio 2007): 45–50. http://dx.doi.org/10.1007/s10973-006-8264-0.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "DSC"

1

Pereira, Thereza Mylene de Moura. "Caracteriza??o t?rmica (TG/DTG, DTA, DSC, DSC-fotovisual) de Horm?nios bioid?nticos (estriol estradiol)". Universidade Federal do Rio Grande do Norte, 2013. http://repositorio.ufrn.br:8080/jspui/handle/123456789/13478.

Testo completo
Abstract (sommario):
Made available in DSpace on 2014-12-17T14:16:30Z (GMT). No. of bitstreams: 1 TherezaMMP_DISSERT.pdf: 3247575 bytes, checksum: b56626eecb3cf571b5b30d6c0ab92d04 (MD5) Previous issue date: 2013-03-22
Bioidentical hormones are defined as compounds that have exactly the same chemical and molecular structure as hormones that are produced in the human body. It is believed that the use of hormones may be safer and more effective than the non-bioidentical hormones, because binding to receptors in the organism would be similar to the endogenous hormone. Bioidentical estrogens have been used in menopausal women, as an alternative to traditional hormone replacement therapy. Thermal data of these hormones are scarce in literature. Thermal analysis comprises a group of techniques that allows evaluating the physical-chemistry properties of a drug, while the drug is subjected to a controlled temperature programming. The thermal techniques are used in pharmaceutical studies for characterization of drugs, purity determination, polymorphism identification, compatibility and evaluation of stability. This study aims to characterize the bioidentical hormones estradiol and estriol through thermal techniques TG/DTG, DTA, DSC, DSC-photovisual. By the TG curves analysis was possible to calculated kinetic parameters for the samples. The kinetic data showed that there is good correlation in the different models used. For both estradiol and estriol, was found zero order reaction, which enabled the construction of the vapor pressure curves. Data from DTA and DSC curves of melting point and purity are the same of literature, showed relation with DSC-photovisual results. The analysis DTA curves showed the fusion event had the best linearity for both hormones. In the evaluation of possible degradation products, the analysis of the infrared shows no degradation products in the solid state
Horm?nios bioid?nticos s?o compostos que t?m exatamente a mesma estrutura qu?mica e molecular dos horm?nios end?genos humanos. Acredita-se que a utiliza??o desses horm?nios pode ser mais segura e eficaz que os horm?nios n?o-bioid?nticos, pois a liga??o aos receptores no organismo se daria de forma semelhante aos horm?nios end?genos. Estrog?nios bioid?nticos v?m sendo utilizado, em mulheres na menopausa, como uma alternativa ? terapia de reposi??o hormonal tradicional. Dados t?rmicos desses horm?nios s?o escassos na literatura. A an?lise t?rmica ? um conjunto de t?cnicas que possibilita medir as propriedades f?sico-qu?micas de uma subst?ncia em fun??o da temperatura. As t?cnicas t?rmicas v?m sendo utilizadas na ?rea farmac?utica em diversas aplica??es, como na caracteriza??o de f?rmacos, determina??o do grau de pureza, identifica??o de polimorfismo, estudos de estabilidade e compatibilidade. Este trabalho tem como objetivo a caracteriza??o dos horm?nios bioid?nticos estradiol e estriol atrav?s das t?cnicas t?rmicas TG/DTG, DTA, DSC, DSC-fotovisual. A partir da an?lise das curvas TG, foi poss?vel calcular os par?metros cin?ticos para as amostras. Os dados cin?ticos mostraram boa correla??o entre os diferentes modelos empregados. Tanto para o estradiol como para o estriol, foi encontrada ordem zero de rea??o, o que possibilitou a constru??o das curvas de press?o de vapor. Dados das curvas DSC e DTA sobre ponto de fus?o e pureza s?o condizentes com a literatura, sendo poss?vel correlacionar estes resultados com o DSC-fotovisual. As an?lises das curvas DTA mostraram o evento de fus?o como o de melhor linearidade para os dois horm?nios. Na avalia??o dos poss?veis produtos de degrada??o, a an?lise do infravermelho mostra que n?o houve produtos de degrada??o no estado s?lido
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Kopecký, Jan. "Určení kinetických parametrů reakcí pomocí DSC měření". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378413.

Testo completo
Abstract (sommario):
The master thesis deals with DSC measurments a calculation of kinetic parameters. In the theoretical part, iron alotropy is briefly described, followed by a description of the DSC analysis itself. The thesis also includes division and derivation of isoconversional methods for calculating the activation energy. In the experimental part, a series of measurments is perfomed on pure iron prepared by Cold Spray method. In the paper the influence of deformation on the Curie temperature of the magnetic transformation in -Fe and transformation > is investigated. The activation energy is calculated for transformation > for different degrees of deformation. The degree of deformation is monitored by channeling contrast.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Hoffman, Roland. "Measuring ΔH Using DSC, TGA & DTA". TopSCHOLAR®, 1990. https://digitalcommons.wku.edu/theses/2500.

Testo completo
Abstract (sommario):
The purpose of this study was to obtain greater accuracy in the measurement of the heat of reaction by combining data from various thermal analysis techniques. Conventional equations that calculate heat of reaction are limited because they do not take in to account mass change. Therefore, an enhanced equation was developed to integrate mass (weight) change to provide greater accuracy. The path chosen to implement this new equation employed simultaneous Thermogravimetric / Differential Thermal Analysis (TG/DTA) that could provide both ΔT and weight data simultaneously. Computer programs were written in C and Pascal languages to provide communication capabilities between computers and to calculate heat of reaction using various equations. This included a qualitative to quantitative (ΔT to ΔH) conversion which was performed to the DTA data file to which the enhanced equation was applied. Various samples were used to test and monitor the performance of the developed equations.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Černý, Štěpán. "Využití multi-echo sekvencí pro DSC-MRI". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242109.

Testo completo
Abstract (sommario):
The task of this thesis is to study the subject of perfusion analysis based on dynamic imaging with T2/T2* contrast. The focus was on the acquisition commonly used for DSC-MRI and especially in the acquisition pulse sequences that use images with different echo time, so called Multi-echo sequence. Principles of dynamic measurement by magnetic resonance imaging, the role of contrast agents and their influence on the relaxation times are described. It also describes the problems perfusion analysis, measurement and mathematical modeling parameters entering to the convolution dependency for getting perfusion parametersIn the experimental part is developed automatic algorithm to gain curves relaxation time T2 *. Next, the synthetic data are created and tested robustness estimate perfusion parameters against noise. In the next phase of work there are compared real scanned objects with using a conversion with T2 * and free of T2*. In the last phase of work is compared influence of length of used echo times on concentration curves and after perfusion analysis influence on resulting perfusion parameters.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Kuběnová, Monika. "Hodnocení homogenity ingotů slitiny Ni-Ti metodou DSC". Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2009. http://www.nusl.cz/ntk/nusl-216478.

Testo completo
Abstract (sommario):
Alloy NiTi with nearequiatomic composition of nickel and titan belongs to a group of metal materials with a shape memory effect (Shape memory alloys). NiTi alloys are a guite attractive materials not only as practical shape memory alloys with hight strenght and ductility but also as those exhibiting unique physical properties. The production of these matrerials is complying with chemical composition. Final charakteristics of alloy are influenced by these bounderies and also by mechanical-heat treatment. This work deal with DSC evaluation of homogenity of ingot structure of NiTi alloy containing 50,8 at.% Ni. The alloy was melted in Y2O3 cricible. In the end the results of DSC method are compared to the microstructure of alloy obtained by SEM and TEM methods.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Porto, Dayanne Lopes. "Contribui??es sobre estudos t?rmicos (TG/DTG, DTA, DSC e DSC-Fotovisual) da rifampicina e seus principais produtos de degrada??o". Universidade Federal do Rio Grande do Norte, 2014. http://repositorio.ufrn.br:8080/jspui/handle/123456789/13506.

Testo completo
Abstract (sommario):
Made available in DSpace on 2014-12-17T14:16:37Z (GMT). No. of bitstreams: 1 DayanneLP_DISSERT.pdf: 9773593 bytes, checksum: c2be9b4f3b701218666100df5b460f30 (MD5) Previous issue date: 2014-03-24
Since its synthesis over 48 years rifampicin has been extensively studied. The literature reports the characterization of thermal events for rifampicin in nitrogen atmosphere, however, no characterization in synthetic air atmosphere. This paper aims to contribute to the thermal study of rifampicin through thermal (TG / DTG, DTA, DSC and DSC - FOTOVISUAL ) and non-thermal (HPLC, XRPD , IR - FTIR , PCA) and its main degradation products ( rifampicin quinone , rifampicin N-oxide 3- formylrifamicin). Rifampicin study was characterized as polymorph form II from techniques DSC, IR and XRPD. TG curves for rifampicin in synthetic air atmosphere showed higher thermal stability than those in N2, when analyzed Ti and Ea. There was characterized as overlapping events melting and recrystallization under N2 with weight loss in the TG curve, suggesting concomitant decomposition. Images DSCFotovisual showed no fusion event and showed darkening of the sample during analysis. The DTA curve in synthetic air atmosphere was visually different from DTA and DSC curves under N2, suggesting the absence of recrystallization and melting or presence only decomposition. The IV - FTIR analysis along with PCA analysis and HPLC and thermal data suggest that rifampicin for their fusion is concomitant decomposition of the sample in N2 and fusion events and recrystallization do not occur in synthetic air atmosphere. Decomposition products studied in an air atmosphere showed no melting event and presented simultaneously to the decomposition initiation of heating after process loss of water and / or solvent, varying the Ti initiating events. The Coats - Redfern , Madsudhanan , Van Krevelen and Herwitz - Mertzger kinetic parameters for samples , through the methods of OZAWA , in an atmosphere of synthetic air and / or N2 rifampicin proved more stable than its degradation products . The kinetic data showed good correlation between the different models employed. In this way we contribute to obtaining information that may assist studies of pharmaceutical compatibility and stability of substances
estudada. H? relatos de estudos focando o desenvolvimento de metodologias anal?ticas, novas aplica??es farmac?uticas, bem como, desenvolvimento de novas formas farmac?uticas. A busca pelo entendimento dascaracter?sticas f?sico-qu?micas das subst?ncias tem auxiliado no desenvolvimento de novos produtos farmac?uticos, com seguran?a, efic?cia e qualidade,fornecendo informa??es ?teis sobre s?ntese e armazenamento. Dentre os produtos de decomposi??o j? conhecidos para rifampicina, temos a rifampicina quinona, rifampicina N-?xido e 3-formilrifampicina, para tais, dados t?rmicos s?o escassos na literatura. As t?cnicas t?rmicas v?m sendo utilizadas na ?rea farmac?utica em diversas aplica??es, como na caracteriza??o de f?rmacos, determina??o do grau de pureza, identifica??o de polimorfismo, estudos de estabilidade, compatibilidade e cin?tica de degrada??o. Este trabalho tem como objetivo contribuir com o estudo t?rmico da rifampicina atrav?s das t?cnicas t?rmicas (TG/DTG, DTA, DSC, DSC-Fotovisual)e n?o t?rmicas, e seus principais produtos de degrada??o (rifampicina quinona, rifampicina N-?xido 3-formilrifamicina). A partir de an?lises DSC, DRX e FTIR foi poss?vel caracterizar a rifampicina estudada como polimorfo II. O conjunto de t?cnicas t?rmicas e n?o t?rmicas auxiliaram a verificar que parte da rifamipicina ? decomposta durante o processo de fus?o, em atmosfera de nitrog?nio, bem como que, os eventos de fus?o e recristaliza??o n?o ocorrem em atmosfera de ar sint?tico passando a amostra diretamente a decomposi??o. Os produtos de decomposi??o estudados, quando em atmosfera de ar, n?o apresentaram evento de fus?o e, apresentaram v?rios passos de decomposi??o, com a ocorr?ncia de eventos exot?rmicos e endot?rmicos. A partir de curvas TG din?micas, foi poss?vel calcular os par?metros cin?ticos para as amostras, atrav?s dos m?todos de OZAWA, Coats-Redfern, Madsudhanan, Van Krevelen e Herwitz-Mertzger, em atmosfera de ar sint?tico e/ou nitrog?nio. Os dados cin?ticos mostraram boa correla??o entre os diferentes modelos empregados. Tanto para rifampicina quanto os produtos de degrada??o estudados, foi caracterizado rea??o de ordem um
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Gerothanassis, I. P. "Application of a DSc in the School of Chemical Sciences". Thesis, University of East Anglia, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.539366.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Sprunt, John. "Structural polymorph characterisation using fibre-optic linked FT-Raman-DSC". Thesis, University of East Anglia, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.267561.

Testo completo
Abstract (sommario):
A low-cost fibre-optic probe was constructed, and used to provide an optical link between an FT-Raman spectrometer and a Differential Scanning Calorimeter (DSC). The resulting Simultaneous Raman-DSC (SRD) method combines the vibrational structural information of FT-Raman spectroscopy with the thermal data of DSC, which is particularly useful for characterisation of samples exhibiting temperature- and thermal conditioning-dependent polymorphic (i. e. structural) changes. The samples chosen for method development and structural study were ammonium nitrate (NH4NO3), the triglyceride sn-1,3-distearoyl-2-oleoyl glycerol (SOS), cocoa butter (which is chiefly composed of a mixture of monounsaturated triglycerides), and some chocolates of differing composition. The bifurcated `6-around-i' parallel fibres probe design allowed Raman spectra to be collected from unencapsulateds amplesi n the normal DSC sample position without extensive mechanical modifications or the use of extra optical components. Method development using the above samples showed that the combined SRD sampling has various effects on collected data. With this probe design, a "glass background" spectrum is superimposed on the Raman spectrum, and must be subtracted using the spectrometer software. At raised temperatures, a thermal emission feature appears in the Raman spectrum at high wavenumber shift. The incident laser light was found to raise sample temperatures by around 1.5-3K. Raman spectra were therefore collected with samples held around 10K below transition onset temperatures. The necessary lack of encapsulation resulted in broadened thermal transitions in DSC heating curves, and potential heat loss due to radiative emission at raised temperatures. However, for samples analysed near room temperature, onset melting points for transitions with the laser off were not significantly altered by SRD sampling. Ammonium nitrate is often irreproducible in it's exact phase transition thermal behaviour. SRD analysis showed the expected phases IV, III, II and I at room temperature and above at normal atmospheric pressure. Raman spectra could then be unambiguously assigned to the respective phases. Comparison with previous literature work allows the spectral changes seen to be interpreted using symmetry-based rationalisations. The triglyceride SOS was found to conform well to the literature thermal behaviour. SRD analysis showed DSC heating curves with onset melting points and features identifying the polymorphs produced as a, , y, ß', ß2 and [il. A literature survey allows the corresponding Raman spectra to be interpreted in the light of structural packing suggestions made by workers using various other analytical techniques. Cocoa butter was successfully prepared in states 3,4,5 and 6 of the six polymorphs known to exist. DSC melting behaviour and heating curve shapes were used to unambiguously relate Raman spectra to the individual polymorphs. Interpretation of Raman spectra was based on the SOS triglyceride SRD results, together with structural packing suggestions from the literature. A selection of chocolate samples were also analysed by SRD. Those with a high cocoa butter content were found to approximate well to the thermal and structural behaviour of pure cocoa butter.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Strutz, Jean Carlos 1982, Sérgio Vidal Garcia 1974 Oliveira e Universidade Regional de Blumenau Programa de Pós-Graduação em Engenharia Elétrica. "Conversor CC-CC elevador trifásico controlado digitalmente com DSC 56f8323 /". reponame:Biblioteca Digital de Teses e Dissertações FURB, 2011. http://www.bc.furb.br/docs/DS/2011/351406_1_1.PDF.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Casaus, Dana M. "DSC, FTIR and SEM Characterization of As-received Colored Elastomeric Chains". The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1236179988.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Libri sul tema "DSC"

1

Frick, Achim, e Claudia Stern. DSC-Prüfung in der Anwendung. München: Carl Hanser Verlag GmbH & Co. KG, 2006. http://dx.doi.org/10.3139/9783446408180.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Frick, Achim, e Claudia Stern. DSC-Prüfung in der Anwendung. München: Carl Hanser Verlag GmbH & Co. KG, 2013. http://dx.doi.org/10.3139/9783446436923.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Frick, Achim, e Claudia Stern. DSC-Prüfung in der Anwendung. München, Germany: Carl Hanser Verlag GmbH & Co. KG, 2013. http://dx.doi.org/10.1007/978-3-446-43692-3.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Lewis, Julian. Racing ace: The fights and flights of 'Kink' Kinkead DSO, DSC, DFC. Barnsley: Pen & Sword Aviation, 2011.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Soward, Stuart E. A formidable hero: Lt. R.H. Gray, VC, DSC, RCNVR. Toronto: Canav Books, 1987.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Koberstein, J. T. Hydrogen bonding in polyurethanes: Preliminary results of simultaneous DSC-FTIR experiments. Princeton: Department of Chemical Engineering, Princeton Univ., 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Urban Policy Action Plan 2004-06: Draft for DSC/Cabinet consideration. [Fiji]: Ministry of Local Government, Housing, Squatter Settlement and Environment, 2004.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Desai, Chandrakant S., Yang Xiao, Musharraf Zaman e John Phillip Carter. DSC/HISS Modeling Applications for Problems in Mechanics, Geomechanics, and Structural Mechanics. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003362081.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

National Institute of Standards and Technology (U.S.), a cura di. Indium freezing-point standard--SRM 1745: Indium DSC melting-point standard--SRM 2232. Gaithersburg, Md: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2001.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

MacInnes, Richard L. Strategic MRO powered by DSC: A roadmap for transforming assets into strategic advantage. New York: Productivity Press, 2003.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Capitoli di libri sul tema "DSC"

1

Gooch, Jan W. "DSC". In Encyclopedic Dictionary of Polymers, 246. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_4078.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Monadjemi, Peter. "DSC-Grundlagen". In Windows Server-Administration mit PowerShell 5.1, 141–55. Wiesbaden: Springer Fachmedien Wiesbaden, 2017. http://dx.doi.org/10.1007/978-3-658-17666-2_8.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Ehrenstein, Gottfried Wilhelm. "Flash-DSC". In Thermische Analyse, 81–95. München: Carl Hanser Verlag GmbH & Co. KG, 2020. http://dx.doi.org/10.3139/9783446464247.004.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Ehrenstein, Gottfried W. "Flash-DSC". In Thermische Analyse, 81–95. München, Germany: Carl Hanser Verlag GmbH & Co. KG, 2020. http://dx.doi.org/10.1007/978-3-446-46424-7_4.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Chiriac, Rodica, François Toche e Christian Brylinski. "Biodiesel: Characterization by DSC and P-DSC". In Calorimetry and Thermal Methods in Catalysis, 455–79. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-11954-5_13.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Chaganti, Ravikanth. "DSC Community Resources". In Windows PowerShell Desired State Configuration Revealed, 269–76. Berkeley, CA: Apress, 2014. http://dx.doi.org/10.1007/978-1-4842-0016-2_12.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Chaganti, Ravikanth. "Debugging DSC Resources". In Pro PowerShell Desired State Configuration, 391–403. Berkeley, CA: Apress, 2018. http://dx.doi.org/10.1007/978-1-4842-3483-9_12.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Chaganti, Ravikanth. "Security in DSC". In Pro PowerShell Desired State Configuration, 405–31. Berkeley, CA: Apress, 2018. http://dx.doi.org/10.1007/978-1-4842-3483-9_13.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Chaganti, Ravikanth. "DSC with Containers". In Pro PowerShell Desired State Configuration, 553–65. Berkeley, CA: Apress, 2018. http://dx.doi.org/10.1007/978-1-4842-3483-9_20.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Chaganti, Ravikanth. "Validating DSC Resources". In Pro PowerShell Desired State Configuration, 219–59. Berkeley, CA: Apress, 2018. http://dx.doi.org/10.1007/978-1-4842-3483-9_7.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "DSC"

1

Diaz, A., E. Kaltofen, K. Schmitz e T. Valente. "DSC". In the 1991 international symposium. New York, New York, USA: ACM Press, 1991. http://dx.doi.org/10.1145/120694.120772.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Islam, Mainul, e Christoph Csallner. "Dsc+Mock". In the Eighth International Workshop. New York, New York, USA: ACM Press, 2010. http://dx.doi.org/10.1145/1868321.1868326.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Chi, Po-Wen. "DSC#6". In 2018 IEEE Conference on Dependable and Secure Computing (DSC). IEEE, 2018. http://dx.doi.org/10.1109/desec.2018.8625123.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Kikuchi, Hiroaki. "DSC#2". In 2018 IEEE Conference on Dependable and Secure Computing (DSC). IEEE, 2018. http://dx.doi.org/10.1109/desec.2018.8625146.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Yamauchi, Toshihiro. "DSC#4". In 2018 IEEE Conference on Dependable and Secure Computing (DSC). IEEE, 2018. http://dx.doi.org/10.1109/desec.2018.8625161.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Amemiya, Koichiro. "DSC#7". In 2018 IEEE Conference on Dependable and Secure Computing (DSC). IEEE, 2018. http://dx.doi.org/10.1109/desec.2018.8625107.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Chang, Morris. "DSC#1". In 2018 IEEE Conference on Dependable and Secure Computing (DSC). IEEE, 2018. http://dx.doi.org/10.1109/desec.2018.8625113.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Lo, Nai-Wei. "DSC#3". In 2018 IEEE Conference on Dependable and Secure Computing (DSC). IEEE, 2018. http://dx.doi.org/10.1109/desec.2018.8625115.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Kesidis, George. "DSC#5". In 2018 IEEE Conference on Dependable and Secure Computing (DSC). IEEE, 2018. http://dx.doi.org/10.1109/desec.2018.8625130.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

"DSC 2020 Commentary". In 2020 IEEE Fifth International Conference on Data Science in Cyberspace (DSC). IEEE, 2020. http://dx.doi.org/10.1109/dsc50466.2020.00001.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "DSC"

1

Harris, Joel. Thermal Conductivity of Pax 2A Explosive by DSC. Fort Belvoir, VA: Defense Technical Information Center, dicembre 1993. http://dx.doi.org/10.21236/ada274721.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Cervantes, O., e J. Montgomery. High Pressure DSC on LLM-105 and other HEs. Office of Scientific and Technical Information (OSTI), novembre 2014. http://dx.doi.org/10.2172/1182244.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Van Buskirk, Caleb Griffith. Comparing Single-Point and Multi-point Calibration Methods in Modulated DSC. Office of Scientific and Technical Information (OSTI), giugno 2017. http://dx.doi.org/10.2172/1364559.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Forth, Tara. Development of Reference Material 8103: Adamantane for Subambient DSC Temperature and Enthalpy Calibration. Gaithersburg, MD: National Institute of Standards and Technology, 2023. http://dx.doi.org/10.6028/nist.sp.260-241.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Mills, R., e R. Coyle. DTA/DSC studies of phase equilibria in binary mixtures of barium carbonate with alkali carbonates. Office of Scientific and Technical Information (OSTI), luglio 1987. http://dx.doi.org/10.2172/6302654.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Wayne, David. Interaction of Concentrated (68%) Aqueous Nitric Acid Solutions with Cheesecloth: A TGA-DSC-MS Study. Office of Scientific and Technical Information (OSTI), gennaio 2023. http://dx.doi.org/10.2172/1908467.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Cordaro, Joseph, Alan Kruizenga e April Nissen. Thermal characterization and model free kinetics of aged epoxies and foams using TGA and DSC methods. Office of Scientific and Technical Information (OSTI), ottobre 2013. http://dx.doi.org/10.2172/1104770.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Mazumder, J., A. Kar, S. Sircar, C. Ribaudo e R. Subramanian. Thermal Analysis System (DSC, TGA, TMA) for Oxidation and Phase Transformation Studies of Alloys with Mestable Phase. Fort Belvoir, VA: Defense Technical Information Center, giugno 1988. http://dx.doi.org/10.21236/ada198420.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Gschwander, Stefan, Thomas Haussmann, Georg Hagelstein, Aran Sole, Gonzalo Diarce, Wolfgang Hohenauer, Daniel Lager et al. Standard to determine the heat storage capacity of PCM using hf-DSC with constant heating/cooling rate (dynamic mode). IEA Solar Heating and Cooling Programme, gennaio 2015. http://dx.doi.org/10.18777/ieashc-task42-2015-0001.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Cloete, Karen, Ziga Smit e Alessandra Gianoncelli. Multidimensional profiling of human body hairs using qualitative and semi-quantitative approaches with SR-XRF, ATR-FTIR, DSC, and SEM-EDX. Peeref, giugno 2023. http://dx.doi.org/10.54985/peeref.2306p7526624.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Ti possono interessare anche gli elenchi estesi di opere sul tema "DSC":
Articoli di riviste Tesi Libri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia