Tesi sul tema "Dessin coréen"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-28 saggi (tesi di laurea o di dottorato) per l'attività di ricerca sul tema "Dessin coréen".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi le tesi di molte aree scientifiche e compila una bibliografia corretta.
Ghannad, Mona. "Design and Synthesis of Collagen-binding Anti-microbial Proteins". Thèse, Université d'Ottawa / University of Ottawa, 2011. http://hdl.handle.net/10393/19981.
Testo completoHalldórsdóttir, Helga Lára. "CORNERED COMPOSITIONS : EXPLORING the CORNER of a ROOM as a METHOD of GARMENT CONSTRUCTION". Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-14907.
Testo completoXu, Jun. "Transitions -- Design a Courthouse". Thesis, Virginia Tech, 1999. http://hdl.handle.net/10919/46203.
Testo completoMaster of Architecture
Malim, Salah. "L'impact de la relaxation sur l'asthme : étude projective de ses effets sur le travail psychique à travers le Rorschach et le test de Corman". Paris 13, 1999. http://www.theses.fr/1999PA131038.
Testo completoWilson, Jacqueline Anne. "Core design aspects". Thesis, University of Manchester, 2011. https://www.research.manchester.ac.uk/portal/en/theses/core-design-aspects(2b99527b-6153-45c0-895b-3ebb43207557).html.
Testo completoJansková, Jana. "Design zahradního nábytku". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228592.
Testo completoLescano, Sergio Andrée. "Design, fabrication and control of a microrobot for laser phonomicrosurgery". Thesis, Besançon, 2015. http://www.theses.fr/2015BESA2002/document.
Testo completoThis thesis reports the design, fabrication and control of a parallel microrobot with two degrees offreedom in rotation, that is destined to perform laser microsurgery on vocal folds. This work has beendeveloped in the frame and in the context of the European project Micro-Technologies and Systemsfor Robot-Assisted Laser Phonomicrosurgery entitled μRALP.On the one hand, needs and limits of medical aspects have been abstracted to create the microrobotspecifications. On the other hand, the state-of-the-art has identified the technological stumblingblocks and has allowed to led to our proposition to satisfy the specifications. This work has envisagedthe fabrication of two independent parallel microrobotic structures. Each proposed microrobot hasa different kinematic structure, however they have the same objective that is to guide a laser beamonto the vocal folds. To this purpose, a mirror is placed on the end-effector of both microrobots inorder to reflect and guide the laser beam. Smart Composite Microstructures fabrication techniquewas used to fabricate the two microrobots. Moreover, piezoelectric cantilever actuators have beenused to generate the required rotations. Finally, the expected precision for laser microsurgery of thevocal folds was reached by coupling the feedforward compensation of nonlinearities and vibrations ofthe actuators with visual feedback control of the parallel kinematic mechanism
Zanco, Philip. "Analysis of Optimization Methods in Multisteerable Filter Design". ScholarWorks@UNO, 2016. http://scholarworks.uno.edu/td/2227.
Testo completoJacobsen, Hanna-Lydia. "Backsides / interiors : Tracing a treatment of backsides in domestic interiors". Thesis, Konstfack, Inredningsarkitektur & Möbeldesign, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:konstfack:diva-6405.
Testo completoIslam, Akib. "Cab Door Design : Improvement of door corners". Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-25872.
Testo completoQu, Ruibin. "Recursive subdivision algorithms for curve and surface design". Thesis, Brunel University, 1990. http://bura.brunel.ac.uk/handle/2438/5447.
Testo completoVeciana, Joaquim M. (Joaquim Maria). "Reducció de vibracions residuals en moviments transitoris. Definició de lleis de moviment per mitjà de corbes B-spline". Doctoral thesis, Universitat de Girona, 2007. http://hdl.handle.net/10803/7768.
Testo completoEl mètode que es proposa en aquesta tesi té com a objectiu principal la síntesi de lleis de moviment per reduir les vibracions residuals. Addicionalment, els senyals generats permeten complir dues condicions definides per l'usuari (anomenats requeriments funcionals). El mètode es fonamenta en la relació existent entre el contingut freqüencial d'un senyal transitori, i la vibració residual generada, segons sigui l'esmorteïment del sistema. Basat en aquesta relació, i aprofitant les propietats de la transformada de Fourier, es proposa la generació de lleis de moviment per convolució temporal de polsos. Aquestes resulten formades per trams concatenats de polinomis algebraics, cosa que facilita la seva implementació en entorns numèrics per mitjà de corbes B-spline.
Many mechanical systems have a vibratory behavior, functionally noticeable, which can be raised when transient excitations happen. Usually, such generated vibrations remain in the system after this transient (residual vibrations), and may imply negative effects in the mechanism's intended function.
The method proposed in this thesis has as main objective, the synthesis of excitation signals for mechanical systems in order to reduce residual vibrations. In addition, generated signals are able to achieve two conditions defined by the user related to function of the mechanism (called functional requirements). This method is based on the relationship between the frequency contents of the transient signal and the residual vibration generated, depending on the system damping. From this relation, and taking advantage of the Fourier transform properties, motion laws are generated through the pulses' time convolution. Resultant laws are made up of algebraic polynomial pieces linked together, which makes them very suitable for implementation with numerical calculus through B-spline curves.
Monreal, Amadeo. "Modelització de corbes i superfícies amb aplicacions al disseny geomètric assistit per ordinador i a l'arquitectura". Doctoral thesis, Universitat Politècnica de Catalunya, 2001. http://hdl.handle.net/10803/5834.
Testo completoEn síntesi, la tesi que es proposa és la de que falta un corpus de teoria matemàtica que permeti al dissenyador codificar la seva creativitat en un format que sigui capaç d'explotar tota la potencialitat de la eina informàtica gràfica, de la mateixa manera que la geometria euclidiana permetia codificar satisfactòriament el disseny que era possible amb el regle i el compàs. Es tracta de concebre explotant la relació que, gràcies als ponts que estableixen els sistemes de coordenades, existeix entre funcions i formes, que es just el que permet a un ordinador "dibuixar" a partir de zeros i uns.
D'acord amb això, la introducció s'ocupa de desenvolupar i argumentar aquest punt de vista. Un cop establertes les dues etapes del disseny i argumentada la carència teòrica en el nivell de concepció, s'aporta maquinària matemàtica per ambdues etapes. Així, el cos de la memòria té dues parts. La Part I recull aportacions pel CAGD, és a dir, per la fase d'execució, la més comú en la recerca actual, consistents principalment en nous mètodes de generació de corbes i superfícies a partir de dades de disseny proporcionades per l'usuari. La Part II ofereix una proposta, entre les possibles, de corpus teòric per cobrir el buit que es senyala en la fase de concepció, consistent en una mena de codi o gramàtica matemàtica organitzada en:
- Lletres: Les funcions en brut. La seva gràfica és germen de formes.
- Paraules: Les funcions modificades amb paràmetres ajustables i formalment significatius.
- Verbs: Operadors funcionals que actuen sobre les paraules amb una acció interpretable en termes formals. S'organitzen en sis tipus, segons la manera d'actuar.
- Oracions: Les formulacions resultants de la interacció dels elements anteriors, que representen els dissenys finals.
Val a dir que es proposa un disseny descompassat, o sigui, sense el compàs, en el sentit de superar la mentalitat ancorada en el regle i el compàs (no eliminant-la sinó incloent-la).
S'adjunten exemples en tots els casos. En la Part II els exemples s'enfoquen cap el disseny gràfic (sanefes, textures) i cap l'arquitectònic (estadi de futbol, naus i galeries i una catedral gòtica, tots completament formulats amb funcions matemàtiques paramètriques).
Pel seu contingut, es tracta d'una memòria interdisciplinar, ja que afecta com a mínim a la psicologia del disseny, al propi disseny, a la història de l'art, a la informàtica i, evidentment, a les matemàtiques. De totes maneres, les matemàtiques que hi apareixen són tractades amb una mentalitat més de dissenyador o d'enginyer que de matemàtic pur. En altres paraules, no és una tesi de teoremes sinó de "fabricació" de mètodes (matemàtics) per ajudar a desenvolupar una manera més creativa de dur a terme el disseny que involucra grafisme.
En primer lugar, se evidencia que el diseño que involucra grafismo se puede analizar como articulado en dos niveles o etapas, uno de concepción, intelectual, y otro de ejecución, manual o físico, ambos siempre en interrelación dialéctica. En segundo lugar, se hacen aportaciones (matemáticas) a ambos niveles. Las matemáticas han estado siempre presentes como vehículo para este diálogo, pero, a partir del nacimiento del software gráfico, esta colaboración se ha actualizado de manera descompensada (cabe decir desacompasada): mientras ha aparecido una nueva teoría, el Diseño Geométrico Asistido por Ordenador (CAGD) para dar cobertura matemática a la vertiente ejecutiva del diseño informatizado, no se ha actualizado el referente matemático teórico para guiar la mente en la tarea de concepción a fin de poder explotar todas las nuevas posibilidades que ofrece la nueva herramienta; este referente sigue siendo eminentemente euclidiano.
En síntesis, la tesis que se propone es la de que falta un corpus de teoría matemática que permita al diseñador codificar su creatividad en un formato que sea capaz de explotar toda la potencialidad de la herramienta informática gráfica, de la misma manera que la geometría euclidiana permitía codificar satisfactoriamente el diseño que era posible con regla y compás. Se trata de concebir explotando la relación que, gracias a los puentes que establecen los sistemas de coordenadas, existe entre funciones y formas, que es precisamente lo que permite a un ordenador "dibujar" a partir de ceros y unos.
De acuerdo con esto, la introducción se ocupa de desarrollar y argumentar este punto de vista. Una vez establecidas las dos etapas del diseño y argumentada la carencia teórica en el nivel de concepción, se aporta maquinaria matemática para ambas etapas. Así, el cuerpo de la memoria tiene dos partes. La Parte I recoge aportaciones para el CAGD, es decir, para la fase de ejecución, la más común en la investigación actual, consistentes principalmente en nuevos métodos de generación de curvas y superficies a partir de datos de diseño proporcionados por el usuario. La Parte II ofrece una propuesta, entre las posibles, de corpus teórico para cubrir el vacío que se señala en la fase de concepción, consistente en una especie de código o gramática matemática organizada en:
- Letras: Las funciones en bruto. Su gráfica es germen de formas
- Palabras: Las funciones modificadas con parámetros ajustables y formalmente significativos.
- Verbos: Operadores funcionales que actúan sobre les palabras con una acción interpretable en términos formales. Se organizan en seis tipos, según la manera de actuar.
- Oraciones: Las formulaciones resultantes de la interacción de los elementos anteriores, que representan los diseños finales
Cabe decir que se propone un diseño desacompasado, o sea, sin el compás, en el sentido de superar la mentalidad anclada en la regla y el compás (no eliminándola sino incluyéndola).
Se adjuntan ejemplos en todos los casos. En la Parte II los ejemplos se enfocan hacia el diseño gráfico (cenefas, texturas) y hacia el arquitectónico (estadio de fútbol, naves y galerías y una catedral gótica, todos completamente formulados con funciones matemáticas paramétricas).
Por su contenido, se trata de una memoria interdisciplinar, ya que afecta como mínimo a la psicología del diseño, al propio diseño, a la historia del arte, a la informática y, evidentemente, a las matemáticas. De todos modos, las matemáticas que aparecen son tratadas con una mentalidad más de diseñador o de ingeniero que de matemático puro. En otras palabras, no es una tesis de teoremas sino de "fabricación" de métodos (matemáticos) para ayudar a desarrollar una manera más creativa de llevar a cabo el diseño que involucra grafismo.
As a preliminar step, it is shown that the design involving graphics is twofold. It has a level of conception that is intellectual and a level of execution that is manual or physical. Both levels are always in dialectical interrelation. This work contains some (mathematical) contributions made to both levels. Mathematics have always been a vehicle for this dialogue, but, from the birth of the graphical software, this collaboration has been updated in an unbalanced way: while a new theory has appeared, the Computer Aided Geometrical Design, to give mathematical support to the executive side of the design with computers, the theoretical mathematical referent that has to guide the mind in the conception task has not been updated in order to exploit all the possibilities that the new tool offers. Therefore, this referent still remains mainly Euclidean.
To sum up, this thesis states that the Euclidean geometry allows a satisfactory codification of the design made with ruler and compasses and uncovers the existing lack of a mathematical theory in order to allow the designer to codify its creativity in a format suitable for exploiting the actual potentiality of the graphical cybernetic tool. The main point is to conceive the designs by exploiting the existing relation between functions and shapes. This relation, based on co-ordinate systems, is precisely the relation that allows a computer to "draw" by means of zeros and ones.
According with this idea, the introduction is devoted to develop and to support this point of view. Once the two stages of the design have been established and the lack of theory at the level of conception has been justified, some mathematical machinery for the two stages is given. Thus, the body of the memory has two parts. Part One collects the contributions to the CAGD, that is, to the execution stage (the most common in the present research), mainly consisting in new methods for the generation of curves and surfaces starting from data given by the user. Part Two offers a proposal of a theoretical corpus in order to cover the gap detected in the conception stage, consisting of a mathematical code or grammar organised in:
- Letters: The raw functions. Its graph is a germ of shapes.
- Words: The functions modified with adjustable and formally significant parameters.
- Verbs: Functional operators that act on the words and they represent an action that can be interpreted in formal terms. They are organised in six types, according to the kind of action.
- Sentences: The formulations obtained from the interaction of the previous elements representing the final design.
A design without compasses is proposed in the sense that it is necessary to go beyond the mentality that is anchored in the ruler and the compasses not by eliminating it, but by including it.
Some examples for all these cases are included. In Part Two, the examples are focussed towards the graphical design (edgings, textures) and towards the architectural design (football stadium, naves, galleries and a gothic-like cathedral). All the examples are completely formulated with mathematical parametrical functions.
Due to its contents, it is an interdisciplinary memory since it has connections with, at least, the psychology of the design, the design itself, the history of the art, the computer science and, evidently, the mathematics. However, the mathematics are managed here more with the mentality of a designer or an engineer than with the mentality of a pure mathematician . In other words, it is not a thesis of theorems but a thesis about the "construction" of (mathematical) methods for helping the development of a more creative computer graphical design.
Travis, Michael Andrew. "Pause". Thesis, Virginia Tech, 2014. http://hdl.handle.net/10919/52555.
Testo completoMaster of Architecture
Comins, Duane Thomas. "Quotidian architecture : occupying the sidewalk". Diss., University of Pretoria, 2012. http://hdl.handle.net/2263/31579.
Testo completoDissertation MArch(Prof)--University of Pretoria, 2012.
Architecture
MArch(Prof)
Unrestricted
Son, Seong-Tae. "SEOUL : formations et transformations du centre ancien et du quartier Gangnam". Thesis, Paris Est, 2017. http://www.theses.fr/2017PESC1192/document.
Testo completoThis study aims to understand Seoul, capital of south Korea, from the point of view of urban form. Seoul, which is located in East Asia, is known as a major historic city in which traditions of city making and city models, which are unique in this area of civilization and inherited from ancient times, were applied. It has underwent accelerated extension and experienced radical transformations in modern era especially since the 1960s.Actual urban form of Seoul shows us complicated and subtle aspect to read : well readable one on one hand and hardly readable one on the other hand. To understand this type of urban form of Seoul we have naturally taken historic ancient center of this city as object of study. We have examined its ancient urban form and its formal transformation by means of formal analysis around following points: relations between the urban form and Zhouli’s capital model, fengshui, and traditions of city making in Korea; and relations between the urban form and particular topography ‘of fengshui’ of Seoul, and Bang-Dong system. We have paid special attention to particular structural system of B.A.C.C. and of rear road network, appeared in ancient center, and also examined the urban form on the level of urban tissue. Next, to understand ‘modern’ urban form of Seoul we have selected Gangnam district and analysed it more or less according to the same points as those above mentioned. Finally, we have explored relation between urban form of historic ancient center and that of modern Gangnam district. In this research we have considered the question of identification, firstly, of entity of urban form of Seoul, and then of characteristics of the last through using ‘practical’ analyse method of urban form which was developed in Europe.Through this study we could deduce the fact that, in the past, city of Seoul possessed particular urban formal characteristics such as hierarchy, introversion, duality, etc, which could be considered as ‘Seoul’s formal specificity’, and that a large part of this quality is succeeded in transformed present ancient center and modern Gangnam district
Cordes, Florian [Verfasser], Frank [Akademischer Betreuer] Kirchner, Frank [Gutachter] Kirchner e Udo [Gutachter] Frese. "Design and Experimental Evaluation of a Hybrid Wheeled-Leg Exploration Rover in the Context of Multi-Robot Systems / Florian Cordes ; Gutachter: Frank Kirchner, Udo Frese ; Betreuer: Frank Kirchner". Bremen : Staats- und Universitätsbibliothek Bremen, 2018. http://d-nb.info/1183252072/34.
Testo completoWang, Yiren. "Modelling and characterisation of losses in nanocrystalline cores". Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/modelling-and-characterisation-of-losses-in-nanocrystalline-cores(eddd2c60-7322-4665-9176-b45e53621285).html.
Testo completoAnand, Banmeet Singh Mitra Ashim K. "Design of prodrugs of acyclovir for ocular, oral, and genital herpes virus infections targeting the oligopeptide and amino acid transporter on the cornea and intestine for improved bioavailability, safety and therapeutic activity /". Diss., UMK access, 2005.
Cerca il testo completo"A dissertation in pharmaceutical sciences and chemistry." Advisor: Ashim K. Mitra. Typescript. Vita. Description based on contents viewed Nov. 21, 2007; title from "catalog record" of the print edition. Includes bibliographical references (leaves 238-258). Online version of the print edition.
Stafford, Peter James. "Engineering seismological studies and seismic design criteria for the Buller Region, South Island, New Zealand". Thesis, University of Canterbury. Civil Engineering, 2006. http://hdl.handle.net/10092/1078.
Testo completoLemmerbrock, Daniel W. "Characteristics of Innovative Physical Learning Spaces at the Four Corner Institutions of the University System of Ohio". Bowling Green State University / OhioLINK, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=bgsu1225320767.
Testo completoHavelka, Michal. "Automatický aplikační systém ochranných rohů paletizovaného materiálu". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442814.
Testo completoBleeker, Jate. "An Impossible Profession: How To Plan the Unplanned?" Thesis, KTH, Urbana och regionala studier, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-200830.
Testo completoSoret, Clément. "Dimensionnement de canalisations sur des critères en déformation dans des environnements extrêmes". Thesis, Paris Sciences et Lettres (ComUE), 2017. http://www.theses.fr/2017PSLEM044/document.
Testo completoPipeline design codes and standards traditionally focus on the operational loadings such as internal and external pressures that are likely to exist over the entire lifetime of the pipeline. Existing Engineering Critical Assessments are mostly based on stress considerations, where the design margin is given as a percentage of the yield strength. In extrem environments, pipelines may experience stresses beyond the yield and plastic deformations up to 2.5 %. In such conditions, strain-based design procedures apply. In this work, a literature review of the existing strain based methods is proposed, including ExxonMobil and PRCI multi-tier approaches. The use of the Single Edge Notched Tension (SENT) specimen to measure the material toughness is then studied, benchmarking the recommended testing procedures from literature. A comprehensive experimental campaign was carried out to fully characterize two actual line pipes at room and low temperatures. The mechanical behavior of parent and weld materials are identified using an inverse analysis, and GTN damage model is shown to allow accurate modeling of the laboratory testings. Finally, two full scale tests (pressure + bending or pressure + tension) were carried out to benchmark the global approaches and GTN damage model. The latter showed a very good transferability from specimens to the structure
Chen, Ching-Jen, e 鄭景仁. "Analysis and Design of the Additive Manufacturing Process for Artificial Cornea". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/61956307618857513337.
Testo completo國立臺灣大學
機械工程學研究所
104
The cornea is the outermost part of the eye and a highly transparent organization without vessels. However, due to injury, infection or disease, the cornea can cause bleaching or transmittance decline. In the worldwide, more than millions people are blind due to corneal problems. The global need for artificial cornea is driven by both the population that cannot tolerate donor corneas and the severe shortage of donor corneas. Additive manufacturing provides the opportunity to produce substitutes of the native tissues, and, in turn, to produce customized tissue constructs. This study aims to analyze and design various additive manufacturing processes for artificial cornea. COMSOL simulation presents the deformation of the corneal structure during fabrication. Moreover, 3D printing enables accurate temperature and pressure control in construction on corneal structure during dispensing and photo-curing of diacrylate-terminated Poloxamer 407 (P407DA) hydrogel. With the precise control at ambient temperature (15°C) and additional air pressure support (45 Pa), fabricated corneas can be formed with a smooth surface and light transmission all over 82% in the range of visible light by additive manufacturing process.
Šrahůlek, Zdeněk. "Konstrukční návrh vybavení recepce dle návrhu firmy A.M.O.S design s.r.o". Master's thesis, 2011. http://www.nusl.cz/ntk/nusl-91167.
Testo completoDoody, Laura. "Evaluation of endothelial cell response to drug for intraocular lens delivery". Thesis, 2011. http://hdl.handle.net/10012/6367.
Testo completoFeng, Zhuo. "Modeling and Analysis of Large-Scale On-Chip Interconnects". 2009. http://hdl.handle.net/1969.1/ETD-TAMU-2009-12-7142.
Testo completo