Letteratura scientifica selezionata sul tema "Design cellule"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Design cellule".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Design cellule"
Vályi-Nagy, Marianna, Attila Rácz, Katalin Irmes, Lajos Szentpéteri, Melinda Tar, Katalin Mária Kassai e István Kristó. "Evaluation of the Development Process of Winter Wheat (Triticum aestivum L.) and Winter Pea (Pisum sativum L.) in Intercropping by Yield Components". Agronomy 13, n. 5 (9 maggio 2023): 1323. http://dx.doi.org/10.3390/agronomy13051323.
Testo completoGiugliano, Giovanna, Mario Buono e Sonia Capece. "Design per configurare nuovi luoghi e spazi di apprendimento adattivi". i+Diseño. Revista Científico-Académica Internacional de Innovación, Investigación y Desarrollo en Diseño 16 (16 dicembre 2021): 107–24. http://dx.doi.org/10.24310/idiseno.2021.v16i.12804.
Testo completoDhiman, Rajni, e Puneet Utreja. "DESIGN AND CHARACTERIZATION OF AMLODIPINE BESYLATE TRANSDERMAL PATCHES USING HYDROXY PROPYL METHYL CELLULOSE AND ETHYL CELLULOSE COMBINATION". INDIAN RESEARCH JOURNAL OF PHARMACY AND SCIENCE 7, n. 4 (dicembre 2020): 2415–31. http://dx.doi.org/10.21276/irjps.2020.7.4.3.
Testo completoBahrepour, Davoud. "A Novel Full Comparator Design Based on Quantum-Dot Cellular Automata". International Journal of Information and Electronics Engineering 5, n. 6 (2015): 406–10. http://dx.doi.org/10.7763/ijiee.2015.v5.568.
Testo completoNozari, Mehrnaz, e Hamed Nahr. "ENGINEERING CELLULAR HARMONY: A COMPREHENSIVE LITERATURE REVIEW ON CELL PRODUCTION SYSTEM DESIGN". American Journal of Management and Economics Innovations 6, n. 1 (1 gennaio 2024): 6–11. http://dx.doi.org/10.37547/tajmei/volume06issue01-02.
Testo completoShahidinejad, Ali, Ali Farrokhtala, Saman Asadi, Maryam Mofarrahi e Toni Anwar. "A Novel Quantum-Dot Cellular Automata XOR Design". Advanced Materials Research 622-623 (dicembre 2012): 545–50. http://dx.doi.org/10.4028/www.scientific.net/amr.622-623.545.
Testo completoDe Roos, Albert D. G. "A Proposed Framework for Cellular Evolution". Communications of the Blyth Institute 1, n. 1 (13 dicembre 2018): 5–12. http://dx.doi.org/10.33014/issn.2640-5652.1.1.deroos.1.
Testo completoYang, Li. "Experimental-assisted design development for an octahedral cellular structure using additive manufacturing". Rapid Prototyping Journal 21, n. 2 (16 marzo 2015): 168–76. http://dx.doi.org/10.1108/rpj-12-2014-0178.
Testo completoArsent’ev, M. Yu, S. V. Balabanov, M. M. Sychev e D. S. Dolgin. "Crystalline Design of Cellular Materials". Glass Physics and Chemistry 46, n. 6 (novembre 2020): 657–60. http://dx.doi.org/10.1134/s1087659620060024.
Testo completoRAJAMANI*, D., N. SINGH e Y. P. ANEJA. "Design of cellular manufacturing systems". International Journal of Production Research 34, n. 7 (luglio 1996): 1917–28. http://dx.doi.org/10.1080/00207549608905004.
Testo completoTesi sul tema "Design cellule"
Qiu, Kepeng. "Analysis and optimal design of lightweight sandwich structures and materials". Besançon, 2008. http://www.theses.fr/2008BESA2046.
Testo completoThe thesis deals with the performance analysis and the topology design of lightweight cellular solids and sandwich structures. Special emphasis is devoted to the topological optimization of periodic cellular solids based on the super-element method. The bending static and dynamic analysis and the core design of sandwich panels considering the size effect of cells is developed. The multi-step homogenization method is applied to calculate the effective elastic constants of multi-layered 3D honeycomb sandwich. The effective results are credible by comparison with other methods including classical formula, energy method and engineering empirical method. An integrated topology optimization procedure is developed for the global stiffness maximization of different cellular solids such as cyclic-symmetry square and cylinder structures. Each RVE (representative volume element) of periodic cellular solids is modeled by the SE (super-element) method. The technique of linking the design variables is adopted to ensure the periodicity of the optimal configuration over the whole structure after optimization. The various optimal configurations permit to illustrate the influence of size variation of RVE-SE on the optimal results. The computational efficiency is studied during the optimization process when the super-element method is adopted. A special study on the size effect is carried out for the bending static and dynamic analysis of the core design of sandwich panels. Special attention is devoted to the influence of size effect on the optimal results
HAJHOUJ, MOUAMD. "Programmation hors ligne : emulation des composants d'une cellule robotisee". Paris, ENSAM, 1988. http://www.theses.fr/1988ENAM0005.
Testo completoDiallo, Cheikh-Dieylar. "Study and design of new multibeam antenna architectures in Ku and Ka bands for broadband satellite applications". Thesis, Rennes 1, 2016. http://www.theses.fr/2016REN1S151/document.
Testo completoMulti-beam antennas (MBAs) are crucial to modern and future, civilian and military satellite telecommunications applications. The low part of the electromagnetic spectrum is congested, while wide band of frequencies are available in the Ka-band, in which broadband missions have emerged in the last decade. The trend is reducing the size of spots in multi-beam coverage to reduce the cost of satellites, hence more electrically large antennas are needed, with major technological breakthrough as a consequence. Luneburg lenses in parallel-plate waveguide (PPW) are attractive solutions to excite MBAs, since they could lead to wide band and field-of-view, low loss and cost, easy to design, manufacture and accommodate Beam Forming Networks. This PhD deals with the development of novel implementations and the design of broadband, low loss and wide field-of-view Luneburg lens based MBAs. The implementation of the Luneburg lens is known as a major technological challenge. A state-of-the art of the implementation techniques is presented. Then two novel implementations of Luneburg lens in PPW environment are proposed, like design method, process and tools. The first implementation consists of a periodic and regular array of subwavelength vertical metal posts, where the PPW spacing is variable. The post height and PPW spacing modulate the equivalent refractive index. The all-metal 9-beams antenna designed, manufactured and measured, has 8314 posts and shows excellent performances, better than the traditional constant PPW spacing version. The second implementation consists of periodic and regular array of subwavelength circular holes etched on the copper cladding of a dielectric substrate with an air gap between the holes plane and the PPW top plate. The radius of the holes control the equivalent index. The 5-beams antenna designed has 2696 holes and shows very good performances as compared to similar devices in literature
Bichon, Alexia. "Etude et détection operando, à l'aide d'une électrode de référence, des hétérogénéités de vieillissement liées au design des cellules lithium-ion". Electronic Thesis or Diss., Université Grenoble Alpes, 2024. http://www.theses.fr/2024GRALY009.
Testo completoThe rapid development of lithium-ion batteries for a wide range of applications, particularly electric vehicles, has accelerated the pace of related research. In order to extend their use, improved performance in terms of energy density, safety and charging rate is a major challenge for the current decade. To meet these criteria, a better understanding of degradation mechanisms and their onset conditions is required [1]. In addition, there are several designs and formats of battery cells, and several types of stress. These different designs have an impact on local stresses and therefore on the ageing modes of internal materials. Thus, the aim of this thesis was to better understand the appearance and development of degradation heterogeneities within electrochemical cells using the same materials but with different "designs".For this thesis, we chose to work on cells composed of NMC622 on the positive electrode and graphite + 10 % SiOx on the negative electrode, assembled in several designs, and we studied their ageing under different cycling conditions. Initially, the study focused on the impact of cycling conditions on degradation mechanisms, in order to establish a protocol favorable to ageing. To this end, small-format cells with a single layer of 30 mAh electrodes were manufactured and instrumented with a reference electrode, enabling the evolution of potentials on each electrode to be monitored [2]. Particular attention was paid to studying the potential of the negative electrode and lithium plating, which is largely responsible for the loss of cyclable lithium during fast charging. This first part of the work enabled us to define the ageing protocols suitable for the study carried out on multilayer cells.Cells with a larger capacity, 500 mAh, chemically identical to the previous ones, were produced in the laboratory using two different designs: stacked and prismatic wound. Aged according to identical protocols, these cells enabled us to compare the two designs and identify, for each, the major causes of degradation depending on the type of cycling. Wound cells showed greater ageing heterogeneity than stacked cells.Finally, knowing the main effects of ageing such as: local drying of the electrolyte, decohesion of the active material and clogging of the separator pores, these defects were artificially reproduced during cell manufacturing in order to better understand their respective impact. In this third part, we sought to study how local degradation developed and impacted the ageing of the entire cell. This stage of the work helped to understand the origin of certain heterogeneities.In parallel with this experimental work, a study of the state of the art has enabled us to identify avenues for the integration of electrode-scale heterogeneities within multi-physics models incorporating ageing at the cell scale. This work has opened up a number of prospects for improving multi-physics models and taking account of stress and ageing heterogeneities as a function of cell design.[1] J. S. Edge et al., Phys. Chem. Chem. Phys., vol. 23, no. 14, pp. 8200–8221, 2021, doi: 10.1039/D1CP00359C.[2] O. Chaouachi, et al., Electrochimica Acta, vol. 366, p. 137428, Jan. 2021, doi: 10.1016/j.electacta.2020.137428
Loricourt, Johan. "Réalisation de liaisons céramique-métal par brasage dans une cellule prototype d’électrolyse de la vapeur d’eau à haute température pour la production d’hydrogène". Thesis, Montpellier 2, 2011. http://www.theses.fr/2011MON20037.
Testo completoSteam electrolysis at high temperature and under pressure with protonic conduction electrolyte is a way to produce hydrogen massively at low cost. To operate, an electrolysis cell must be hermetic especially between the anodic compartment (O2 and H2O) and the cathodic one (H2). Thus, ceramic to metal assemblies are needed, either to insert the electrolyte (perovskite-metal junction) or to realize power supply (alumina-metal junction).Considering the operating conditions (873°K, 725 PSI, steam), only a brazing process is possible to realize strong and hermetic junctions.The evaluation of corrosion process under steam pressure has enabled to select a metallic component and a brazing alloy for this application, and has shown that specific alloys are needed.The studies of ceramics metallization by PVD to assure the brazing alloy wetting throughout the brazing process have shown that a barrier diffusion was necessary to avoid the dissolution of coatings when the brazing alloy become liquid.After wetting experimentations of the chosen brazing alloy over the metalized ceramics and the metallic substrate, ceramic to metal assemblies have been optimized in applying the experimental design methodology on standard samples (ASTM).The whole results have enabled to develop hermetic ceramic to metal assemblies having good mechanical properties (Rm = 8700 PSI at 300°K)
Quinton, Cassandre. "Dérivés de s-tétrazine et de triphénylamine : du design aux applications". Phd thesis, École normale supérieure de Cachan - ENS Cachan, 2013. http://tel.archives-ouvertes.fr/tel-00957915.
Testo completoDa, Silva Joao Lucas. "Design and control of a multicell interleaved converter for a hybrid photovoltaic-wind generation system". Phd thesis, Toulouse, INPT, 2017. http://oatao.univ-toulouse.fr/19318/7/DASILVA_JoaoLucas.pdf.
Testo completoHadj, Ahmed Asmaa. "Design of new electrochemical cells for studying enzymes by protein film electrochemistry". Electronic Thesis or Diss., Aix-Marseille, 2022. http://www.theses.fr/2022AIXM0100.
Testo completoProtein Film Electrochemistry (PFE) is a technique in which an enzyme is adsorbed at an electrode and its catalytic turnover rate is measured as an electrical current which allows the investigation of enzyme’s kinetics as a function of different experimental parameters. However, this technique requires fast transport of the substrate towards the electrode. In a previous study, our team proposed a new design based on the wall-tube electrode that provides better transport than the rotating disc electrode, which is commonly used in PFE methods. In this thesis, we explored, using CFD, the effect of the various parameters of the design and proposed semi-empirical formulas to predict the mass transport coefficient and shear stress at the electrode. We used a 3D-printed cell to validate experimentally our predictions. Moreover, we designed and built a new type of wall-tube electrodes with integrated mixers that should allow faster changes of substrate and inhibitor’s concentrations
Moussy, Alice. "Caractérisation des premières étapes de différenciation des cellules hématopoïétiques à l'échelle de la cellule unique". Thesis, Paris Sciences et Lettres (ComUE), 2017. http://www.theses.fr/2017PSLEP029/document.
Testo completoDespite intensively studies, the fundamental mechanisms of cell fate decision during cellular differentiation still remain unclear. The deterministic mechanisms, often based on studies of large cell populations, cannot explain the difference between individual cell fates choices placed in the same environment. The aim of my thesis work is to study the first steps of hematopoietic cell differentiation at the single cell level thanks to transcriptomic, proteomic and morphological analyses. Two differentiation models have been used: T regulatory lymphocytes and human cord blood-derived CD34+ cells. The behavior of individual cells following stimulation has been analyzed. Using time-lapse microscopy coupled to single cell molecular analyses, we could demonstrate that the cell fate choice is not a unique, programmed event. First, the cell reaches a metastable “multi-primed” state, which is characterized by a mixed lineage gene expression pattern. After transition through an “uncertain”, unstable state, characterized by fluctuations between two phenotypes, the cell reaches a stable state. Our observations are coherent with a stochastic model of cell fate decision. The differentiation is likely to be a spontaneous, dynamic, fluctuating and not a deterministic process. The cell fate decisions are taken by individual cells
Barnard, Damian Kelly. "Design and construction of modular genetic devices and the enzymatic hydrolysis of lignocellulosic biomass". Thesis, University of Edinburgh, 2012. http://hdl.handle.net/1842/7688.
Testo completoLibri sul tema "Design cellule"
Macario, R. C. V. Cellular radio: Principles and design. Basingstoke: Macmillan, 1993.
Cerca il testo completoSmith, Clint. Cellular system design and optimization. New York: McGraw-Hill, 1996.
Cerca il testo completoClint, Smith. Practical cellular and PCS design. New York: McGraw-Hill, 1998.
Cerca il testo completoMacario, R. C. V. Cellular radio: Principles and design. 2a ed. Basingstoke: MacMillan, 1997.
Cerca il testo completoClint, Smith. Cellular system design and optimization. New York: McGraw-Hill, 1996.
Cerca il testo completoMartin, Hänggi, e Moschytz George S, a cura di. Cellular neural networks: Analysis, design, and optimization. Boston: Kluwer Academic Publishers, 2000.
Cerca il testo completoSingh, Nanua. Cellular Manufacturing Systems: Design, planning and control. Boston, MA: Springer US, 1996.
Cerca il testo completoHänggi, Martin. Cellular Neural Networks: Analysis, Design and Optimization. Boston, MA: Springer US, 2000.
Cerca il testo completoFaruque, Saleh. Cellular mobile systems engineering. Boston: Artech House, 1996.
Cerca il testo completoDogaru, Radu. Systematic Design for Emergence in Cellular Nonlinear Networks. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-76801-2.
Testo completoCapitoli di libri sul tema "Design cellule"
Macario, R. C. V. "Cellular Radio Design Principles". In Cellular Radio, 61–86. London: Macmillan Education UK, 1997. http://dx.doi.org/10.1007/978-1-349-14433-4_3.
Testo completoHeins, Kersten. "Device Design". In Trusted Cellular IoT Devices, 131–45. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-19663-8_5.
Testo completoHänggi, Martin, e George S. Moschytz. "Robust Template Design". In Cellular Neural Networks, 23–46. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4757-3220-7_3.
Testo completoKlostermaier, Klaus Konrad. "The Identity of Designer and Design". In Cellular Origin, Life in Extreme Habitats and Astrobiology, 239–54. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-4156-0_13.
Testo completoMacario, R. C. V. "Digital Cellular Designs". In Cellular Radio, 190–243. London: Macmillan Education UK, 1997. http://dx.doi.org/10.1007/978-1-349-14433-4_9.
Testo completoMcMullan, Niall. "Vaccine Design and Vaccination". In Molecular and Cellular Therapeutics, 286–303. Chichester, UK: John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119967309.ch13.
Testo completoHeins, Kersten. "Ingredients for Secure Design". In Trusted Cellular IoT Devices, 85–129. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-19663-8_4.
Testo completoFan, Liang-tseng, Mahendra Moreshwar Gharpuray e Yong-Hyun Lee. "Design and Economic Evaluation of Cellulose Hydrolysis Processes". In Cellulose Hydrolysis, 149–87. Berlin, Heidelberg: Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-642-72575-3_5.
Testo completoGupta, Pallav. "Circuit Design with Quantum Cellular Automata". In Nanoelectronic Circuit Design, 441–77. New York, NY: Springer New York, 2010. http://dx.doi.org/10.1007/978-1-4419-7609-3_13.
Testo completoSevenhans, Jan, Jacques Wenin, Damien Macq e Jacques Dulongpont. "Silicon Integration for Digital Cellular Communication". In Analog Circuit Design, 89–100. Boston, MA: Springer US, 2001. http://dx.doi.org/10.1007/978-1-4613-1443-1_5.
Testo completoAtti di convegni sul tema "Design cellule"
Knapp, Chris, e Jonathan Nelson. "Cellular Tessallation". In ACADIA 2014: Design Agency. ACADIA, 2014. http://dx.doi.org/10.52842/conf.acadia.2014.209.2.
Testo completoKoerner, Julia, Marie Boltenstern e Kais Al-Rawi. "Cellular Complexity "Evolve"". In ACADIA 2014: Design Agency. ACADIA, 2014. http://dx.doi.org/10.52842/conf.acadia.2014.193.
Testo completoMissoum, Azzedine, Ashwani K. Gupta e Jianrong Chen. "Global Kinetics of the Thermal Decomposition of Materials". In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/cie-4433.
Testo completoMurphy, I. "Synthesiser design". In IEE Colloquium on Design of Digital Cellular Handsets. IEE, 1998. http://dx.doi.org/10.1049/ic:19980233.
Testo completoSmithers, C. "Power amplifier design". In IEE Colloquium on Design of Digital Cellular Handsets. IEE, 1998. http://dx.doi.org/10.1049/ic:19980235.
Testo completoMcMillan, K. "Design for manufacture". In IEE Colloquium on Design of Digital Cellular Handsets. IEE, 1998. http://dx.doi.org/10.1049/ic:19980238.
Testo completoHe, David, e Angela Adamyan. "Multidisciplinary Machine Cell Formation for Design of Cellular Manufacturing Systems". In ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/dfm-8928.
Testo completoYao, Yuan. "Cellular Morphology in Los Angeles". In ACADIA 2014: Design Agency. ACADIA, 2014. http://dx.doi.org/10.52842/conf.acadia.2014.239.
Testo completoVelikov, Kathy, Geoffrey Thun e Mary O'Malley. "PneuSystems: cellular pneumatic envelope assemblies". In ACADIA 2014: Design Agency. ACADIA, 2014. http://dx.doi.org/10.52842/conf.acadia.2014.435.
Testo completoVelikov, Kathy, Geoffrey Thun e Mary O'Malley. "PneuSystems: cellular pneumatic envelope assemblies". In ACADIA 2014: Design Agency. ACADIA, 2014. http://dx.doi.org/10.52842/conf.acadia.2014.435.
Testo completoRapporti di organizzazioni sul tema "Design cellule"
Harmon, Jennifer. Homegrown: Investigating Design Potential of Bacterial Cellulose. Ames: Iowa State University, Digital Repository, 2017. http://dx.doi.org/10.31274/itaa_proceedings-180814-216.
Testo completoHuang, J. S., e L. J. Gibson. Microstructural design of cellular materials I: Honeycomb beams and plates. Office of Scientific and Technical Information (OSTI), giugno 1992. http://dx.doi.org/10.2172/10173387.
Testo completoRuzzene, Massimo. Application of Chiral Cellular Structures for the Design of Innovative Structural Assemblies. Fort Belvoir, VA: Defense Technical Information Center, febbraio 2008. http://dx.doi.org/10.21236/ada482145.
Testo completoChen, Yongzhou, Ammar Tahir e Radhika Mittal. Controlling Congestion via In-Network Content Adaptation. Illinois Center for Transportation, settembre 2022. http://dx.doi.org/10.36501/0197-9191/22-018.
Testo completoGhanim, Murad, Joe Cicero, Judith K. Brown e Henryk Czosnek. Dissection of Whitefly-geminivirus Interactions at the Transcriptomic, Proteomic and Cellular Levels. United States Department of Agriculture, febbraio 2010. http://dx.doi.org/10.32747/2010.7592654.bard.
Testo completoRobles, Marcelo. Safety and efficacy study of cross-linked hyaluronic acid filler in nasolabial folds. Editorial Lugones, dicembre 2023. http://dx.doi.org/10.47196/0573.
Testo completoMacDonald, James D., Aharon Abeliovich, Manuel C. Lagunas-Solar, David Faiman e John Kabshima. Treatment of Irrigation Effluent Water to Reduce Nitrogenous Contaminants and Plant Pathogens. United States Department of Agriculture, luglio 1993. http://dx.doi.org/10.32747/1993.7568092.bard.
Testo completoTeng, Henry, e Khalid Mosalam. Long-Term Monitoring of Bridge Settlements using Vision-Based Embedded System. Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, dicembre 2020. http://dx.doi.org/10.55461/apri8198.
Testo completoCarpita, Nicholas C., Ruth Ben-Arie e Amnon Lers. Pectin Cross-Linking Dynamics and Wall Softening during Fruit Ripening. United States Department of Agriculture, luglio 2002. http://dx.doi.org/10.32747/2002.7585197.bard.
Testo completoRafaeli, Ada, Russell Jurenka e Chris Sander. Molecular characterisation of PBAN-receptors: a basis for the development and screening of antagonists against Pheromone biosynthesis in moth pest species. United States Department of Agriculture, gennaio 2008. http://dx.doi.org/10.32747/2008.7695862.bard.
Testo completo