Bibliografie tematiche / Dental materials Evaluation

Indice

  1. Articoli di riviste
  2. Tesi
  3. Libri
  4. Capitoli di libri
  5. Atti di convegni

Letteratura scientifica selezionata sul tema "Dental materials Evaluation"

Autore: Grafiati
Pubblicato: 4 giugno 2021
Ultima modifica: 20 febbraio 2023

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Dental materials Evaluation".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Dental materials Evaluation"

1

Khurram, Maleeha, Khurram Jah Zafar, Aneela Qaisar, Tahmeena Atiq e Sohail Abbas Khan. "RESTORATIVE DENTAL MATERIALS". Professional Medical Journal 25, n. 01 (8 gennaio 2018): 140–49. http://dx.doi.org/10.29309/tpmj/18.4230.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Wendt, Stanley L., Thomas L. Ziemiecki e Larz S. Spångberg. "Indirect cytotoxic evaluation of dental materials". Oral Surgery, Oral Medicine, Oral Pathology 75, n. 3 (marzo 1993): 353–56. http://dx.doi.org/10.1016/0030-4220(93)90150-3.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Polyzois, G. L. "In vitro evaluation of dental materials". Clinical Materials 16, n. 1 (gennaio 1994): 21–60. http://dx.doi.org/10.1016/0267-6605(94)90088-4.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

HE, Li-Hong, Lyndie FOSTER PAGE e David PURTON. "An evaluation of dental operative simulation materials". Dental Materials Journal 31, n. 4 (2012): 645–49. http://dx.doi.org/10.4012/dmj.2011-264.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Wennberg, Alf. "Cell Culture in the Biological Evaluation of Dental Materials: A Review". Alternatives to Laboratory Animals 13, n. 3 (marzo 1985): 194–202. http://dx.doi.org/10.1177/026119298501300305.

Testo completo
Abstract (sommario):
Systematic research on dental materials began after World War I. For a long time the research was focused on the physical properties of the materials, and papers dealing with biological aspects were scarce. By the late 1950s a growing interest in biological responses to dental materials developed, and from the 1970s biological and physical evaluations were deemed equally important (1). Mammalian cells have been maintained in vitro since the early years of this century, but the use of cultured cells to evaluate the effects of chemicals and drugs is a more recent occurrence. The first practical application of this technique was in pharmacological investigations (2), but applications in other fields soon followed, and in 1955 the first studies were reported where a cell culture technique had been applied to the biological evaluation of dental materials (3,4). Since then the use of cell culture systems in dental materials research has grown rapidly. The main application has been for the assessment of cytotoxic effects, and the purpose of this paper is to review different test methods and discuss some facets of the problems posed by the cytotoxicity testing of dental materials.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

KNIBBS, P. J. "Methods of clinical evaluation of dental restorative materials". Journal of Oral Rehabilitation 24, n. 2 (28 giugno 2008): 109–23. http://dx.doi.org/10.1111/j.1365-2842.1997.tb00303.x.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Udod, O. A., e O. B. Roman. "COMPARATIVE CLINICAL EVALUATION OF DENTAL RESTORATIONS WITH VARIOUS MATERIALS". Bulletin of Problems Biology and Medicine 4, n. 2 (2020): 386. http://dx.doi.org/10.29254/2077-4214-2019-4-2-154-386-389.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

KNIBBS, P. J. "Review Methods of clinical evaluation of dental restorative materials". Journal of Oral Rehabilitation 24, n. 2 (febbraio 1997): 109–23. http://dx.doi.org/10.1046/j.1365-2842.1997.00437.x.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Barreto, B. C. F., L. H. A. Raposo, S. J. B. Sousa, A. G. Pereira, A. Versluis, L. Correr-Sobrinho e C. J. Soares. "Three-point bending test parameters for dental materials evaluation". Dental Materials 28 (gennaio 2012): e2-e3. http://dx.doi.org/10.1016/j.dental.2012.07.012.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Mackert, J. R. "Side-Effects of Dental Ceramics". Advances in Dental Research 6, n. 1 (settembre 1992): 90–93. http://dx.doi.org/10.1177/08959374920060012301.

Testo completo
Abstract (sommario):
Evaluation of side-effects to low-dose exposure of any agent is difficult, especially if the agent exhibits a low toxicity. The most common way to approach such evaluation is to define special groups which are exposed more than others. Studies of such risk groups may facilitate interpretation of information related to those exposed to a low dose. For dental materials, dentists, dental assistants, and laboratory technicians represent typical risk groups. In addition to receiving dental treatments and having restorations like anyone else, they handle the materials in their daily work. The exposure to the materials occurs more frequently and at a higher dose for these groups than for the patient receiving dental treatment. Thus, the possibilities for side-effects are greater. Some materials are handled more closely by laboratory technicians than by other members of the dental team, e.g., dental ceramics.
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "Dental materials Evaluation"

1

Li, Jingjing. "Evaluation of different dental materials using a slugging fluidized bed". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape3/PQDD_0016/MQ58054.pdf.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Shabanian-Borojeni, Mitra. "Wear studies of enamel and some restorative materials". Title page, contents and summary only, 2001. http://web4.library.adelaide.edu.au/theses/09PH/09phs5241.pdf.

Testo completo
Abstract (sommario):
Includes bibliographical references (leaves [1-20]). A systematic analysis of wear involving the in vitro analysis of the wear of standard composite resin and glass ionomer cements restorations under controlled conditions; and, the qualitative and quantitative investigation of wear over a range of pH's and loads which might be encountered clinically in order to develop a "wear map" of the micromorphology of wearing teeth and restorations and a systematic modeling of wear rates.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Sidhu, Sharanbir Kaur. "Resin-modified glass ionomer restorative materials : an evaluation involving microscopy". Thesis, King's College London (University of London), 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.362847.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Murphy, Matthew. "Evaluation of dental implant materials and interactions with calcium phosphate solutions". Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/evaluation-of-dental-implant-materials-and-interactions-with-calcium-phosphate-solutions(62aff83f-146d-4c79-85fd-0fb95c4d31e2).html.

Testo completo
Abstract (sommario):
In this thesis, four experimental studies are reported. Two concern the surface structure of commercially relevant dental implant materials. Characterisation of four treated substrates supplied by Straumann AG was carried out. These include substrates equivalent to the commercially available SLA, SLActive and Roxolid implants. The materials vary in substrate alloy, commercially pure (grade 2) Ti and a TiZr alloy, and surface preparation treatments. All substrates are sandblasted and acid etched however post-etching one set are stored in air whilst the others are stored in saline. Within the work both substrate composition and surface treatment is shown to impact on the respective surface oxide thickness, crystallinity and morphology. The other two experimental studies concern calcium phosphate deposition from solution onto substrates. The first investigation is the deposition of calcium phosphate from a simulated body fluid onto implant-like substrates, shown to be structurally equivalent to the SLA and SLActive implant surfaces. The effect of surface modifications on calcium phosphate deposition is investigated; over the period investigated calcium phosphate did not deposit onto the SLA substrate, whilst deposition occurred within 3 days on the SLActive substrate. The role of Mg2+ ions in the simulated body fluid is also investigated, with increased [Mg2+] resulting in a longer induction period and modified crystallinity of the hydroxyapatite film formed. The final study is a model study of the initial calcium phosphate deposition on to substrates. TiO2 rutile (110) and Al2O3 corundum (0001) were prepared to be atomically flat and then exposed to a simple calcium phosphate solution. Changes in surface structure and surface chemistry over the first three hours of exposure were investigated. Deposition occurred rapidly on both substrates with a complete surface coverage after 3 hours.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Lam, Wiley T. C. "In vitro evaluation of fluoride release and artificial caries formation with selected glass polyalkenoate cements". [Hong Kong] : Faculty of Dentistry, The University of Hong Kong, 1996. http://sunzi.lib.hku.hk/HKUTO/record/B3862817X.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

林德昭 e Wiley T. C. Lam. "In vitro evaluation of fluoride release and artificial caries formation with selected glass polyalkenoate cements". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1996. http://hub.hku.hk/bib/B3862817X.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Leung, Sau-kuen. "Clinical evaluation of compomers used as restorations in primary teeth". Hong Kong : University of Hong Kong, 1998. http://sunzi.lib.hku.hk/hkuto/record.jsp?B2120360X.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Hse, Mei-yin Kitty, e 許美賢. "Clinical evaluation of compomer, a polyacid-modified composite resin, in primary teeth: 1 year results". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1996. http://hub.hku.hk/bib/B31954029.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Hse, Mei-yin Kitty. "Clinical evaluation of compomer, a polyacid-modified composite resin, in primary teeth 1 year results /". Hong Kong : Faculty of Dentistry, The University of Hong Kong, 1996. http://sunzi.lib.hku.hk/hkuto/record.jsp?B19902232.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Leung, Sau-kuen, e 梁秀娟. "Clinical evaluation of compomers used as restorations in primaryteeth". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1998. http://hub.hku.hk/bib/B31954054.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Libri sul tema "Dental materials Evaluation"

1

J, Anusavice Kenneth, a cura di. Quality evaluation of dental restorations: Criteria for placement and replacement : proceedings of the International Symposium on Criteria for Placement and Replacement of Dental Restorations, Lake Buena Vista, Florida, October 19-21, 1987. Chicago: Quintessence Pub. Co., 1989.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Ishak, Muhammad Ikman. Biomechanics in Dentistry: Evaluation of Different Surgical Approaches to Treat Atrophic Maxilla Patients. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

1933-, Mjör Ivar Andreas, a cura di. Dental materials: Biological properties and clinical evaluations. Boca Raton, Fla: CRC Press, 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Kadir, Mohammed Rafiq Abdul, e Muhammad Ikman Ishak. Biomechanics in Dentistry : Evaluation of Different Surgical Approaches to Treat Atrophic Maxilla Patients: Evaluation of Different Surgical Approaches ... in Applied Sciences and Technology). Springer, 2012.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Mjor, Ivar Andreas. Dental Materials: Biological Properties and Clinical Evaluations. CRC Press, 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Capitoli di libri sul tema "Dental materials Evaluation"

1

Beltrán-Fernández, Juan Alfonso, Mauricio González Rebattú Y. González, Luis Héctor Hernández-Gómez, Alejandro Gonzalez Rebatú Y. González e Guillermo Urriolagoitia Calderón. "Mechanical Evaluation of Microimplants for Dental Surgery". In Advances in Bio-Mechanical Systems and Materials, 81–86. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-00479-2_6.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Ozyegin, L. S., R. Tuncer e E. Avci. "Hardness, Behavior and Metal Surface Evaluation of Recasting Non-Precious Dental Alloys". In Key Engineering Materials, 1425–28. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-422-7.1425.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Hariprasad, M. P., e K. Ramesh. "Contact Zone Evaluation of Dental Implants Using Digital Photoelasticity". In Mechanics of Biological Systems and Materials, Volume 6, 39–43. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-41351-8_6.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Walsh, Jennifer M., Robert Hill, Anthony Johnson e Paul V. Hatton. "Evaluation of Castable Apatite-Mullite Glass-Ceramics for Medical and Dental Applications". In Materials for Medical Engineering, 65–72. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527606149.ch9.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Stansbury, J. W., e W. J. Bailey. "Evaluation of Spiro Orthocarbonate Monomers Capable of Polymerization with Expansion as Ingredients in Dental Composite Materials". In Progress in Biomedical Polymers, 133–39. Boston, MA: Springer US, 1990. http://dx.doi.org/10.1007/978-1-4899-0768-4_14.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Cui, Jun, Jun Ou, Yong Lie Chao, Q. P. Gao, Guang Fu Yin, H. Wang, J. F. Shen e Yang Xi Chen. "A New Method for Evaluating Thermal Compatibility of Multi-Layer Dental Ceramic Composites". In Key Engineering Materials, 1401–4. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-422-7.1401.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Mahmat, Zeliha, Lutfu S. Sua e Figen Balo. "Evaluating Alternatives in Dental Implant Materials by SWARA and Gray Relational Analysis". In Springer Proceedings in Energy, 221–33. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92148-4_10.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Pradhan, Madhuri, Suchismita Satapathy e Bijaya B. Nayak. "Thermal Analysis of the Dental Implant Sites under Different Experimental-Conditions: An Approach for Selection of Dental Implant Material and Evaluation of Site Preparation". In Advances in Mechanical and Industrial Engineering, 46–52. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003216742-8.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Mohamad, Dasmawati, e Habsah Hasan. "Nanoparticles as antibacterial agent for dental restorative materials and their antibacterial activity evaluation". In Handbook of Microbial Nanotechnology, 209–24. Elsevier, 2022. http://dx.doi.org/10.1016/b978-0-12-823426-6.00008-5.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Gke, Blent. "Effects of Er:YAG Laser Irradiation on Dental Hard Tissues and All-Ceramic Materials: SEM Evaluation". In Scanning Electron Microscopy. InTech, 2012. http://dx.doi.org/10.5772/34240.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Dental materials Evaluation"

1

Rizzo, Piervincenzo, Aydin Tabrizi, Bruk Berhanu e Mark W. Ochs. "Nondestructive methods to assess dental implant stability". In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, a cura di Vijay K. Varadan. SPIE, 2012. http://dx.doi.org/10.1117/12.914793.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

La Malfa Ribolla, Emma, Piervincenzo Rizzo e Vincenzo Gulizzi. "On the use of EMI for the assessment of dental implant stability". In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, a cura di Tribikram Kundu. SPIE, 2014. http://dx.doi.org/10.1117/12.2043823.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Rizzo, Piervincenzo, Giovanni Boemio e Luigi de Nardo. "Use of the electro-mechanical impedance method for the assessment of dental implant stability". In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, a cura di Vijay K. Varadan. SPIE, 2011. http://dx.doi.org/10.1117/12.879270.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Pustan, Marius, Corina Birleanu e Sanda Mirela Pop. "Nanocharacterization of Dental Materials by Atomic Force Microscopy and Their Thermal Degradation Evaluation". In CMDWC 2021. Basel Switzerland: MDPI, 2021. http://dx.doi.org/10.3390/cmdwc2021-09942.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Strocchi, S., M. Ghielmi, F. Basilico, A. Macchi, R. Novario, R. Ferretti e E. Binaghi. "Quantitative evaluation of susceptibility effects caused by dental materials in head magnetic resonance imaging". In SPIE Medical Imaging, a cura di Despina Kontos, Thomas G. Flohr e Joseph Y. Lo. SPIE, 2016. http://dx.doi.org/10.1117/12.2206083.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Hilerio, I., e M. A. Barron. "Analysis of Dental Enamel Topography". In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-81938.

Testo completo
Abstract (sommario):
One of the fields of active research in dentistry today is biomaterials replacing, which is expected to be increasingly more similar to human dental enamel. As these dental materials are exposed to the diverse degrading actions present in the oral environment, it is important to know its superficial topography, which is related to the existence of asperities on a smaller scale, responsible for the interaction between opposing bodies. In this work we try to characterize the superficial topography of the dental enamel and evaluating a sane tooth and another degraded by use, comparing the values of the texture SEM. The results indicate that the dental enamel presents a topographical profile with a symmetrical distribution, between peaks and valleys, relative to the parameters of amplitudes as well as to parameters of material concentrations. The values encountered for the amplitude and densities of peaks parameters are high. It was verified in the degraded tooth the existence of mechanisms of mechanical origin added to chemical reactions, producing a wear type called “chemical wear”. The existence of this phenomenon was identified by verification in the degraded tooth of the presence of more deep valleys in relation to the peaks. The abrasion mechanism, also present in this wear type, decreased significantly the amplitude of the peaks. The evaluation methodology via profilometry3D revealed potentially efficient for the characterization of superficial topography and by verification of the mechanisms of wear dental.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Gradinaru, Irina, Bianca-Iulia Ciubotaru, Mihaela Dascalu, Alexandra Bargan e Ana-Lavinia Vasiliu. "Alginate Dental Impression Materials with Allantoin Enrichment: A Morphology, Dynamic Vapor Sorption And Swelling Evaluation". In 2022 E-Health and Bioengineering Conference (EHB). IEEE, 2022. http://dx.doi.org/10.1109/ehb55594.2022.9991391.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Bulutsuz, A. G., P. Demircioglu, I. Bogrekci, M. N. Durakbasa e A. B. Katiboglu. "Measurement and image processing evaluation of surface modifications of dental implants G4 pure titanium created by different techniques". In 4TH INTERNATIONAL CONGRESS IN ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE (APMAS 2014). AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4914215.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Badea, Florin Ciprian, Elvis Sachir Erdogan, Gheorghe Raftu, Victoria Badea e Mircea Grigorian. "STUDY ON THE EVALUATION OF ORAL REHABILITATION USING DENTAL IMPLANT BY QANTIFYING OSTEOPROTEGERIN AND INTERLEUKIN". In NORDSCI International Conference. SAIMA Consult Ltd, 2020. http://dx.doi.org/10.32008/nordsci2020/b1/v3/30.

Testo completo
Abstract (sommario):
Partial and total edentation has been a real problem worldwide and at all times. The realization of an individualized treatment plan for each form of edentation takes into account the particularities of the edentulous prosthetic field and the materials used as well as the conventional or modern techniques applied. The study group consisted of 220 patients in whom dental implants were inserted; the control group was randomized from 10 patients with a favorable evolution out of the 210 (94.55%). At 7 and 60 days after the insertion of the dental implants and 6 months after their prosthetic loading, crevicular fluid and peri-implant fluid was harvested, for the quantitative determination of Osteoprotegerin (OPG) and Interleukin 1β (IL1-β). Of the 220 patients studied, 10 developed peri implantitis (5.45%) as follows: 4 patients with mucositis and 6 patients with severe form. The results obtained show that there are differences with statistical significance between the OPG values obtained in crevicular fluid in healthy compared to patients with mucositis after 7 days (p <0.001). Regarding IL1-β, there are differences with high statistical significance between the levels in healthy patients and those with peri-implantitis after 7 days (p <0.001). Our results show the existence of a high correlation between the clinical status and these two parameters, especially after the determinations performed at 7 and 60 days. In conclusions, the present study shows that the OPG and IL1-β can be considered useful markers in the evaluation of the patient after the insertion of the dental implant and after its prosthetic loading.
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Alexander, Chris, e Julian Bedoya. "Repair of Dents Subjected to Cyclic Pressure Service Using Composite Materials". In 2010 8th International Pipeline Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ipc2010-31524.

Testo completo
Abstract (sommario):
For the better part of the past 15 years composite materials have been used to repair corrosion in high pressure gas and liquid transmission pipelines. This method of repair is widely accepted throughout the pipeline industry because of the extensive evaluation efforts performed by composite repair manufacturers, operators, and research organizations. Pipeline damage comes in different forms, one of which involves dents that include plain dents, dents in girth welds and dents in seam welds. An extensive study has been performed over the past several years involving multiple composite manufacturers who installed their repair systems on the above mentioned dent types. The primary focus of the current study was to evaluate the level of reinforcement provided by composite materials in repairing dented pipelines. The test samples were pressure cycled to failure to determine the level of life extension provided by the composite materials relative to a set of unrepaired test samples. Several of the repaired dents in the study did not fail even after 250,000 pressure cycles were applied at a range of 72% SMYS. The results of this study clearly demonstrate the significant potential that composite repair systems have, when properly designed and installed, to restore the integrity of damaged pipelines to ensure long-term service.
Gli stili APA, Harvard, Vancouver, ISO e altri
Ti possono interessare anche gli elenchi estesi di opere sul tema "Dental materials Evaluation":
Articoli di riviste Tesi
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia