Letteratura scientifica selezionata sul tema "DED metal additive manufacturing"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "DED metal additive manufacturing".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "DED metal additive manufacturing"
Peyre, Patrice. "Additive Layer Manufacturing using Metal Deposition". Metals 10, n. 4 (1 aprile 2020): 459. http://dx.doi.org/10.3390/met10040459.
Testo completoZhang, Wenjun, Chunguang Xu, Cencheng Li e Sha Wu. "Advances in Ultrasonic-Assisted Directed Energy Deposition (DED) for Metal Additive Manufacturing". Crystals 14, n. 2 (24 gennaio 2024): 114. http://dx.doi.org/10.3390/cryst14020114.
Testo completoZiesing, Ulf, Jonathan Lentz, Arne Röttger, Werner Theisen e Sebastian Weber. "Processing of a Martensitic Tool Steel by Wire-Arc Additive Manufacturing". Materials 15, n. 21 (22 ottobre 2022): 7408. http://dx.doi.org/10.3390/ma15217408.
Testo completoStrong, Danielle, Michael Kay, Thomas Wakefield, Issariya Sirichakwal, Brett Conner e Guha Manogharan. "Rethinking reverse logistics: role of additive manufacturing technology in metal remanufacturing". Journal of Manufacturing Technology Management 31, n. 1 (7 agosto 2019): 124–44. http://dx.doi.org/10.1108/jmtm-04-2018-0119.
Testo completoDass, Adrita, e Atieh Moridi. "State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design". Coatings 9, n. 7 (29 giugno 2019): 418. http://dx.doi.org/10.3390/coatings9070418.
Testo completoRodríguez-González, Paula, Erich Neubauer, Enrique Ariza, Leandro Bolzoni, Elena Gordo e Elisa María Ruiz-Navas. "Assessment of Plasma Deposition Parameters for DED Additive Manufacturing of AA2319". Journal of Manufacturing and Materials Processing 7, n. 3 (8 giugno 2023): 113. http://dx.doi.org/10.3390/jmmp7030113.
Testo completoSaboori, Abdollah, Mostafa Toushekhah, Alberta Aversa, Manuel Lai, Mariangela Lombardi, Sara Biamino e Paolo Fino. "Critical Features in the Microstructural Analysis of AISI 316L Produced By Metal Additive Manufacturing". Metallography, Microstructure, and Analysis 9, n. 1 (2 gennaio 2020): 92–96. http://dx.doi.org/10.1007/s13632-019-00604-6.
Testo completoKo, Ui Jun, Ju Hyeong Jung, Jung Hyun Kang, Kyunsuk Choi e Jeoung Han Kim. "Enhanced Microstructure and Wear Resistance of Ti–6Al–4V Alloy with Vanadium Carbide Coating via Directed Energy Deposition". Materials 17, n. 3 (3 febbraio 2024): 733. http://dx.doi.org/10.3390/ma17030733.
Testo completoSaboori, Abdollah, Alberta Aversa, Giulio Marchese, Sara Biamino, Mariangela Lombardi e Paolo Fino. "Microstructure and Mechanical Properties of AISI 316L Produced by Directed Energy Deposition-Based Additive Manufacturing: A Review". Applied Sciences 10, n. 9 (9 maggio 2020): 3310. http://dx.doi.org/10.3390/app10093310.
Testo completoSarzyński, Bartłomiej, Lucjan Śnieżek e Krzysztof Grzelak. "Metal Additive Manufacturing (MAM) Applications in Production of Vehicle Parts and Components—A Review". Metals 14, n. 2 (5 febbraio 2024): 195. http://dx.doi.org/10.3390/met14020195.
Testo completoTesi sul tema "DED metal additive manufacturing"
TESTA, Cristian (ORCID:0000-0002-6064-9851). "Corrosion behaviour of metal alloys obtained by means of additive manufacturing". Doctoral thesis, Università degli studi di Bergamo, 2020. http://hdl.handle.net/10446/181512.
Testo completoKaya, Fuat Emre. "Applications of Additive Manufacturing in Construction and Historic Building Restoration/Rehabilitation". Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021. http://amslaurea.unibo.it/22784/.
Testo completoSchneider-Maunoury, Catherine. "Application de l’injection différentielle au procédé de fabrication additive DED-CLAD® pour la réalisation d’alliages de titane à gradients de compositions chimiques". Thesis, Université de Lorraine, 2018. http://www.theses.fr/2018LORR0260/document.
Testo completoSince 1984, the Functionally Graded Material (FGM) allow to create a thermal barrier and to reduce the strong discontinuities of properties between two materials of different composition. These multimaterials,whose consist of an intentional variation in the chemical composition and, consequently, modify the microstructural, chemical, mechanical and thermal properties, lead to a smooth distribution of the thermal stress. The in-situ development of these custom-made alloys is made possible by the use of additive manufacturing processes such as the DED-CLAD® powder deposition process. These processes have grown substantially since the 1980s and are optimal for the manufacture of FGM. During this industrial thesis, technical developments have been carried out to adapt the DED-CLAD® process and to allow the manufacturing of FGM. Thanks to two industrial collaborations, a full study was carried out on titanium-molybdenum and titanium-niobium alloys. These alloys make it possible, in the first case, to produce parts resistant to strong thermal stress (space sector), and in the second case to combine mechanical properties and biocompatibility (biomedical sector). The originality of this thesis rests on the study of a complete gradient, that is the addition in alloy element varied from 0% to 100%. In fact, studies reported in the literature do not mention titanium-refractory material for high levels of refractory element. Microstructural (XRD, crystallographic analysis by EBSD technique), chemical (EDS) and mechanical (microhardness, tensile test and instrumented indentation) analyses revealed an evolution of the properties along the chemical gradient. The mechanical characterization of the sample by instrumented indentation has also proved particularly relevant in the case of these multi-materials
Vandi, Daniele. "Studio del comportamento a fatica di provini in Maraging steel realizzati tramite Additive Manufacturing". Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2019.
Cerca il testo completoSchneider-Maunoury, Catherine. "Application de l’injection différentielle au procédé de fabrication additive DED-CLAD® pour la réalisation d’alliages de titane à gradients de compositions chimiques". Electronic Thesis or Diss., Université de Lorraine, 2018. http://www.theses.fr/2018LORR0260.
Testo completoSince 1984, the Functionally Graded Material (FGM) allow to create a thermal barrier and to reduce the strong discontinuities of properties between two materials of different composition. These multimaterials,whose consist of an intentional variation in the chemical composition and, consequently, modify the microstructural, chemical, mechanical and thermal properties, lead to a smooth distribution of the thermal stress. The in-situ development of these custom-made alloys is made possible by the use of additive manufacturing processes such as the DED-CLAD® powder deposition process. These processes have grown substantially since the 1980s and are optimal for the manufacture of FGM. During this industrial thesis, technical developments have been carried out to adapt the DED-CLAD® process and to allow the manufacturing of FGM. Thanks to two industrial collaborations, a full study was carried out on titanium-molybdenum and titanium-niobium alloys. These alloys make it possible, in the first case, to produce parts resistant to strong thermal stress (space sector), and in the second case to combine mechanical properties and biocompatibility (biomedical sector). The originality of this thesis rests on the study of a complete gradient, that is the addition in alloy element varied from 0% to 100%. In fact, studies reported in the literature do not mention titanium-refractory material for high levels of refractory element. Microstructural (XRD, crystallographic analysis by EBSD technique), chemical (EDS) and mechanical (microhardness, tensile test and instrumented indentation) analyses revealed an evolution of the properties along the chemical gradient. The mechanical characterization of the sample by instrumented indentation has also proved particularly relevant in the case of these multi-materials
TREVISAN, FRANCESCO. "Study and characterisation of different metal alloys processed through Laser Powder Bed Fusion". Doctoral thesis, Politecnico di Torino, 2018. http://hdl.handle.net/11583/2709711.
Testo completoDoutre, Pierre-Thomas. "Comment intégrer et faire émerger des structures architecturées dans l'optimisation de pièces pour la fabrication additive par faisceaux d’électrons". Thesis, Université Grenoble Alpes (ComUE), 2018. http://www.theses.fr/2018GREAI039.
Testo completoThanks to additive manufacturing, it is now possible to manufacture new geometric shapes. The prospects offered by the methods of conventional and additive manufacturing are very different. Highly constrained design proposals can become much freer with additive manufacturing. The freedom it offers brings forward a multitude of possibilities. In this manuscript, we focused on a particular type of structures (the octetruss) as well as the use of EBM (Electron Beam Melting) of ARCAM as a means of manufacturing. The work presented in this thesis was carried out in the laboratories G-SCOP and SIMAP as well as in partnership with the company POLY-SHAPE. This manuscript focuses on three main points.The first of which is the action of emergence of lattice structures during the design process. For this, two existing approaches are detailed. The first uses topological optimization and the second is based on the concept of equivalent material. Following these, there are two methodologies used to identify areas in which the integration of lattice structures is possible and appropriate. The first consists of creating the different zones by relying on a stress field resulting from a finite element calculation, the second establishes the different zones using a topological optimization result. This second methodology is applied to an industrial case study.Secondly, we study how to fill the different areas with appropriate lattice structures by focusing first on their generation. Particular emphasis is placed on the intersection of the various bars by the establishment of spheres. A methodology for generating rounded-shape is also proposed. A study is carried out on all the parameters and information in order to integrate a lattice structure to a given area. This study leads to a proposed methodology that is applied to an industrial case study.Finally, aspects related to manufacturing are taken into account. For this, we consider different limits of the EBM manufacturing and what they mean for lattice structures; such as maximum achievable dimensions or thermal problems. A study to predict powder removal in order to extract the fabricated structure is performed. Mechanical tests are carried out. Our results are compared to those obtained in other works. The impact of curve on the mechanical behavior of a product is discussed
Graf, Marcel, Sebastian Härtel e André Hälsig. "Numerische Auslegung des Mehrlagenschweißens als additives Fertigungsverfahren". Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-225946.
Testo completoChougrani, Laurent. "Modélisation avancée de formes complexes de pièces mécaniques pour lesprocédés de fabrication additive". Thesis, Paris, ENSAM, 2017. http://www.theses.fr/2017ENAM0054.
Testo completoAdditive manufacturing processes have been quickly growing those past decades and are now getting to their sustainable industrial. Industry has been caring about the mass to rigidity ratio of the structures it produces (especially in aeronautics), and is now acknowledging the potential of additive processes to produce more complex shapes than classical processes. Industry is now trying to take advantage of this potential by designing highly complex structures like lattices or metal foams. The work that is presented in this document propose a methodology, models and numerical tools allowing the conception, dimensioning and optimization of such structures through additive manufacturing. The proposed framework can be describe through the height following steps:- Importing the design space and the technical requirement (load cases).- Topology optimization of the design space- Geometry reconstruction to create a primitive which will be the lattice insertion area.- Finite elements computation to ensure that the structure meets the requirements.- Lattice topology definition using 3D graphs.- Lattice deformation and optimization.- Creation of the volumes around the lattice.- Printing file creation and 3D printing
Marion, Guillaume. "Modélisation de procédés de fabrication additive de pièces aéronautiques et spatiales en Ti-6AI-4V par dépôt et fusion sélective d'un lit de poudre par laser : Approche thermique, métallurgique et mécanique". Thesis, Paris Sciences et Lettres (ComUE), 2016. http://www.theses.fr/2016PSLEM055.
Testo completoAdditive manufacturing processes allow to build finished industrial parts with very complex geometry, while reducing development time and costs compared to conventional manufacturing processes. The main principle of all these processes is to build components directly from a CAD file defining its geometry without requiring any mold nor specific tools.This study is part of the FALAFEL research project focused on additive manufacturing processes by laser and electron beams. It is composed of academic research laboratories and industrial partners from Aeronautics and Laser Processes industries. The main goal of this project is to implement, improve and validate additive manufacturing processes regarding the production of metallic components for Aeronautics. Studies are conducted under industrial conditions.The aim of our thesis is to provide a numerical model to obtain, within a reasonable time, information about the mechanical and metallurgical properties of industrial components made out of titanium Ti-6Al-4V. It is aimed at two additive manufacturing processes: the Direct Metal Deposition (DMD) and the Selective laser melting (SLM)
Libri sul tema "DED metal additive manufacturing"
Leach, Richard, e Simone Carmignato. Precision Metal Additive Manufacturing. A cura di Richard Leach e Simone Carmignato. First edition. | Boca Raton, FL : CRC Press, 2020.: CRC Press, 2020. http://dx.doi.org/10.1201/9780429436543.
Testo completoShrivastava, Parnika, Anil Dhanola e Kishor Kumar Gajrani. Hybrid Metal Additive Manufacturing. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003406488.
Testo completoWaters, Cynthia K. Materials Technology Gaps in Metal Additive Manufacturing. Warrendale, PA: SAE International, 2018. http://dx.doi.org/10.4271/pt-189.
Testo completoBian, Linkan, Nima Shamsaei e John M. Usher, a cura di. Laser-Based Additive Manufacturing of Metal Parts. Boca Raton: CRC Press, Taylor & Francis, 2018.: CRC Press, 2017. http://dx.doi.org/10.1201/9781315151441.
Testo completoRamesh Babu, N., Santosh Kumar, P. R. Thyla e K. Sripriyan, a cura di. Advances in Additive Manufacturing and Metal Joining. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-7612-4.
Testo completoBorg Costanzi, Christopher. Reinforcing and Detailing of Thin Sheet Metal Using Wire Arc Additive Manufacturing as an Application in Facades. Wiesbaden: Springer Fachmedien Wiesbaden, 2023. http://dx.doi.org/10.1007/978-3-658-41540-2.
Testo completoAdaskin, Anatoliy, Aleksandr Krasnovskiy e Tat'yana Tarasova. Materials science and technology of metallic, non-metallic and composite materials:the technology of manufacturing blanks and parts. Book 2. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1143897.
Testo completoLeach, Richard, e Simone Carmignato. Precision Metal Additive Manufacturing. Taylor & Francis Group, 2020.
Cerca il testo completoLeach, Richard, e Simone Carmignato. Precision Metal Additive Manufacturing. Taylor & Francis Group, 2020.
Cerca il testo completoLeach, Richard, e Simone Carmignato. Precision Metal Additive Manufacturing. Taylor & Francis Group, 2020.
Cerca il testo completoCapitoli di libri sul tema "DED metal additive manufacturing"
Suryanarayanan, R., e Vishvesh Badheka. "Direct Energy Deposition Process (DED) and an Insight into DED Process Using Flux-cored and Metal-cored Wires". In Additive Manufacturing for Advance Applications, 147–71. Boca Raton: CRC Press, 2024. http://dx.doi.org/10.1201/9781003484325-7.
Testo completoYang, Liu, Boyu Wang, Jack C. P. Cheng, Peipei Liu e Hoon Sohn. "Real-Time Geometry Assessment Using Laser Line Scanner During Laser Powder Directed Energy Deposition Additive Manufacturing of SS316L Component with Sharp Feature". In CONVR 2023 - Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality, 965–76. Florence: Firenze University Press, 2023. http://dx.doi.org/10.36253/10.36253/979-12-215-0289-3.97.
Testo completoYang, Liu, Boyu Wang, Jack C. P. Cheng, Peipei Liu e Hoon Sohn. "Real-Time Geometry Assessment Using Laser Line Scanner During Laser Powder Directed Energy Deposition Additive Manufacturing of SS316L Component with Sharp Feature". In CONVR 2023 - Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality, 965–76. Florence: Firenze University Press, 2023. http://dx.doi.org/10.36253/979-12-215-0289-3.97.
Testo completoZhao, Hao, e Garrison Zong. "Metal Additive Manufacturing". In Materials in Advanced Manufacturing, 269–300. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003182146-6.
Testo completoPaul, C. P., A. N. Jinoop e K. S. Bindra. "Metal additive manufacturing using lasers". In Additive Manufacturing, 37–93. First edition. | Boca Raton, FL : CRC Press/Taylor & Francis Group, 2018.: CRC Press, 2018. http://dx.doi.org/10.1201/b22179-2.
Testo completoSingh, Narinder, Rupinder Singh e I. P. S. Ahuja. "Metal Matrix Composite from Thermoplastic Waste". In Additive Manufacturing, 187–210. First edition. | Boca Raton, FL : CRC Press/Taylor & Francis Group, 2018.: CRC Press, 2018. http://dx.doi.org/10.1201/b22179-5.
Testo completoWang, Di, Yongqiang Yang e Changjun Han. "Additive Manufacturing of Metal Implants and Surgical Plates". In Additive Manufacturing, 151–203. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-04721-3_5.
Testo completoYadav, Ashish, Manu Srivastava, Prashant K. Jain e Sandeep Rathee. "Mechanical Properties of Multi-layer Wall Structure Fabricated through Arc-Based DED Process". In Wire Arc Additive Manufacturing, 213–21. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003363415-11.
Testo completoChandra, Mukesh, K. E. K. Vimal e Sonu Rajak. "In situ process monitoring and control in metal additive manufacturing". In Additive Manufacturing, 57–75. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003258391-4.
Testo completoDasdemir, Umit, e Emre Altas. "Metal Based Additive Manufacturing". In Practical Implementations of Additive Manufacturing Technologies, 63–87. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-5949-5_4.
Testo completoAtti di convegni sul tema "DED metal additive manufacturing"
Chan, Rothanak, Sriram Manoharan e Karl R. Haapala. "Comparing the Sustainability Performance of Metal-Based Additive Manufacturing Processes". In ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/detc2017-68262.
Testo completoHeinrich, Lauren, Thomas Feldhausen, Kyle S. Saleeby, Christopher Saldana e Thomas R. Kurfess. "Prediction of Thermal Conditions of DED With FEA Metal Additive Simulation". In ASME 2021 16th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/msec2021-63841.
Testo completoMin, Wenbo, Sheng Yang, Ying Zhang e Yaoyao Fiona Zhao. "A Comparative Study of Metal Additive Manufacturing Processes for Elevated Sustainability". In ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/detc2019-97436.
Testo completoBeccard, R., e A. Bartling. "Digital Process Chains for 3D Laser Cladding and LMD/DED Additive Manufacturing". In ITSC2022. DVS Media GmbH, 2022. http://dx.doi.org/10.31399/asm.cp.itsc2022p0840.
Testo completoChen, Ze, Chengcheng Wang, Sastry Yagnanna Kandukuri e Kun Zhou. "Additive Manufacturing of Monel K-500 via Directed Energy Deposition for Pressure Vessel Applications". In ASME 2022 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/pvp2022-85735.
Testo completoRescsanski, Sean, Aref Yadollahi, Mojtaba Khanzadeh e Farhad Imani. "Anomaly Detection of Laser-Based Metal Additive Manufacturing Using Neural-Variational Auto-Encoder". In ASME 2023 18th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/msec2023-105156.
Testo completoGarg, Richie, Harish Singh Dhami, Priti Ranjan Panda e Koushik Viswanathan. "Directed Energy Deposition Using Non-Spherical Metal Powders?" In ASME 2022 17th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/msec2022-84945.
Testo completoTsao, Teng-Yueh, e Jen-Yuan (James) Chang. "Application of Electrostatic Adhesion Method in Metal-Powder-Based Additive Manufacturing Layer-Forming Process". In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-88741.
Testo completoMoylan, Shawn, Michael McGlauflin, Jared Tarr e M. Alkan Donmez. "Geometric Performance Testing of Directed Energy Deposition Additive Manufacturing Machine Using Standard Tests for Machine Tools". In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-71737.
Testo completoQiao, Dongchun, Bo Wang e Hai Gu. "Additive Manufacturing: Challenges and Solutions for Marine and Offshore Applications". In ASME 2020 39th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/omae2020-18922.
Testo completoRapporti di organizzazioni sul tema "DED metal additive manufacturing"
Slattery, Kevin, e Kirk A. Rogers. Internal Boundaries of Metal Additive Manufacturing: Future Process Selection. SAE International, marzo 2022. http://dx.doi.org/10.4271/epr2022006.
Testo completoShenouda, S., e A. Hoff. Discrete Element Method Analysis for Metal Powders Used in Additive Manufacturing, and DEM Simulation Tutorial Using LIGGGHTS-PUBLIC. Office of Scientific and Technical Information (OSTI), agosto 2020. http://dx.doi.org/10.2172/1656962.
Testo completoDehoff, Ryan R., e Michael M. Kirka. Additive Manufacturing of Porous Metal. Office of Scientific and Technical Information (OSTI), giugno 2017. http://dx.doi.org/10.2172/1362246.
Testo completoKim, Felix H., e Shawn P. Moylan. Literature review of metal additive manufacturing defects. Gaithersburg, MD: National Institute of Standards and Technology, maggio 2018. http://dx.doi.org/10.6028/nist.ams.100-16.
Testo completoLove, Lonnie J., Andrzej Nycz e Mark W. Noakes. Large Scale Metal Additive Manufacturing with Wolf Robotics. Office of Scientific and Technical Information (OSTI), luglio 2018. http://dx.doi.org/10.2172/1465067.
Testo completoNycz, Andrzej, Mark Noakes, Luke Meyer, Chris Masuo, Derek Vaughan, Lonnie Love e Mike Walker. Large Scale Metal Additive Manufacturing for Stamping Dies. Office of Scientific and Technical Information (OSTI), agosto 2022. http://dx.doi.org/10.2172/1883756.
Testo completoKnapp, Cameron M. Los Alamos National Laboratory’s Approach to Metal Additive Manufacturing. Office of Scientific and Technical Information (OSTI), marzo 2016. http://dx.doi.org/10.2172/1242923.
Testo completoLee, Yousub, Srdjan Simunovic e A. Kate Gurnon. Quantification of Powder Spreading Process for Metal Additive Manufacturing. Office of Scientific and Technical Information (OSTI), ottobre 2019. http://dx.doi.org/10.2172/1615799.
Testo completoSlotwinski, John, April Cooke e Shawn Moylan. Mechanical properties testing for metal parts made via additive manufacturing :. Gaithersburg, MD: National Institute of Standards and Technology, 2012. http://dx.doi.org/10.6028/nist.ir.7847.
Testo completoMoylan, Shawn, John Slotwinski, April Cooke, Kevin Jurrens e M. Alkan Donmez. Lessons learned in establishing the NIST metal additive manufacturing laboratory. National Institute of Standards and Technology, giugno 2013. http://dx.doi.org/10.6028/nist.tn.1801.
Testo completo